Comparative Study of Catalytic Activity of Recyclable Au/Fe3O4 Microparticles for Reduction Of 2,4-Dinitrophenol and Anionic, Cationic Azo Dyes

We synthesized Au/Fe3O4 microparticles. Initially, citrate-capped Fe3O4 micro-sized particles were synthesized by the co-precipitation method with an excess amount of trisodium citrate. Gold ions were reduced on the surface of citrate-capped Fe3O4 and grew as gold sub-microparticles with an average diameter of 210 nm on the surface. The characteristic SPR peak of gold nanoparticles on the surface of Fe3O4 was detected at 584 nm, whereas the absorption in the near-infrared region was increased. SEM images has proved that the synthesized Au/Fe3O4 composite microparticles has an average diameter of 1.7 micrometers. The results of XRD patterns proved the existence of both crystal phases of Fe3O4 and Au particles. To investigate the catalytic activity, the reaction rate constant of reduction of 2,4-dinitrophenol (2,4-DNP) and degradation of Congo red (CR), and methylene blue (MB) with NaBH4 in the presence of Au/Fe3O4 catalyst was monitored by UV-Vis spectroscopy. The initial reaction rate constant calculated from the change in characteristic peak absorptions of 2,4-dinitrophenol was 3.97×10-3 s-1, while the reaction rate constants for the degradation of CR and MB were 9.72×10-3 s-1 and 14.25×10-3 s-1 respectively. After 5 cycles, Au/Fe3O4 microparticles preserved 99 % of the reaction rate constant, exhibiting considerable recycling efficiency in the reduction of nitro groups.

Flocculation synergistic with nano zero-valent iron augmented attapulgite @ chitosan as Fenton-like catalyst for the treatment of landfill leachate

In this study, nano-zero-valent iron (NZVI) was added to attapulgite/chitosan and used as a catalyst in the heterogeneous Fenton process to degrade stabilized landfill leachate. Landfill leachate has serious environmental impacts due to the complexity and diversity of its pollutants. A magnetic catalyst (NZVI@PATP/CS) was prepared by a liquid-phase reduction method. The NZVI@PATP/CS were characterized by XRD, FTIR and SEM. The pH of leachate and the dosage of catalyst and H2O2 were changed to determine the best-operating conditions for the effective removal of chemical oxygen demand (COD) and total phosphorus(TP). To understand the adsorption degradation mechanism, the quenching experiments of free radicals were carried out. The results showed that the degradation rates of COD and TP were 66% and 92%, respectively, under the optimum pH value of 8, the dosage of H2O2 of 5 mL, and the dosage of the catalyst of 0.25 g for 60 min.

Enhanced Alkaline Oxygen Evolution Using Spin Polarization and Magnetic Heating Effects under an AC Magnetic Field

Renewable electricity from splitting water to produce hydrogen is a favorable technology to achieve carbon neutrality, but slow anodic oxygen evolution reaction (OER) kinetics limits its large-scale commercialization. Electron spin polarization and increasing the reaction temperature are considered as potential ways to promote alkaline OER. Here, it is reported that in the alkaline OER process under an AC magnetic field, a ferromagnetic ordered electrocatalyst can simultaneously act as a heater and a spin polarizer to achieve significant OER enhancement at a low current density. Moreover, its effect obviously precedes antiferromagnetic, ferrimagnetic, and diamagnetic electrocatalysts. In particular, the noncorrected overpotential of the ferromagnetic electrocatalyst Co at 10 mA cm^-2 is reduced by a maximum of 36.6% to 243 mV at 4.320 mT. It is found that the magnetic heating effect is immediate, and more importantly, it is localized and hardly affects the temperature of the entire electrolytic cell. In addition, the spin pinning effect established on the ferromagnetic/paramagnetic interface generated during the reconstruction of the ferromagnetic electrocatalyst expands the ferromagnetic order of the paramagnetic layer. Also, the introduction of an external magnetic field further increases the orderly arrangement of spins, thereby promoting OER. This work provides a reference for the design of high-performance OER electrocatalysts under a magnetic field.

Key Role of Lorentz Excitation in the Electromagnetic-Enhanced Hydrogen Evolution Reaction

Alternating magnetic fields (AMFs) are recently demonstrated as a promising strategy to promote the electrochemical catalytic reactions. However, the underlying mechanisms are still an open question. In this work, we systematically investigated the influence of AMFs on the hydrogen evolution reaction (HER) by using a Fe-Co-Ni-P-B magnetic catalyst. The HER catalytic efficiency is boosted significantly by AMFs, with 27% increase in current density at 20 mT. This is attributed to the enhancement of charge-transfer efficiency by Lorentz interaction with a minor contribution from the heating effect. The high magnetic permeability and skin effect of electromagnetic eddy current for the Fe-Co-Ni-P-B electrode can magnify the Lorentz effect. These findings clarify the mechanism of AMF-enhanced HER catalytic activities and open a door for designing a high-efficiency electrocatalysis system.

Ionic Liquid-Assisted Fabrication of Bioactive Heterogeneous Magnetic Nanocatalyst with Antioxidant and Antibacterial Activities for the Synthesis of Polyhydroquinoline Derivatives

Antibacterial materials have obtained much attention in recent years due to the presence of hazardous agents causing oxidative stress and observation of pathogens. However, materials with antioxidant and antibacterial activities can cause toxicity due to their low biocompatibility and safety profile, urging scientists to follow new ways in the synthesis of such materials. Ionic liquids have been employed as a green and environmentally solvent for the fabrication of electrically conductive polymers. In the present study, an antibacterial poly(p-phenylenediamine)@Fe₃O₄ (PpPDA@Fe₃O₄) nanocomposite was fabricated using [HPy][HSO₄] ionic liquid. The chemical preparation of PpPDA@Fe₃O₄ nanocomposite was initiated through the oxidative polymerization of p-phenylenediamine by ammonium persulfate in the presence of [HPy][HSO₄]. The PpPDA@Fe₃O₄ nanocomposite exhibited antibacterial properties against Gram-negative (Escherichia coli) and Gram-positive (Bacillus subtilis) bacteria. The PpPDA@Fe₃O₄ nanocomposite was employed as a heterogeneous nanocatalysis for one-pot synthesis of polyhydroquinoline derivatives using aromatic aldehyde, dimedone, benzyl acetoacetate, and ammonium acetate. Polyhydroquinoline derivatives were synthesized in significant yields (90–97%) without a difficult work-up procedure in short reaction times. Additionally, PpPDA@Fe₃O₄ nanocatalyst was recycled for at least five consecutive catalytic runs with a minor decrease in the catalytic activity. In this case, 11 derivatives of polyhydroquinoline showed in vitro antioxidant activity between 70–98%.

Mechanism of catalytic ozonation for elimination of methyldopa with Fe3 O4 @SiO2 @CeO2 catalyst

In this study, a magnetic nanocatalyst (Fe₃ O₄ @SiO₂ @CeO₂ ) was prepared and applied in the catalytic ozonation of methyldopa (MD). The effects of operational parameters on catalytic ozonation performance were investigated, including ozone dosage, catalyst dosage, initial MD concentration, and pH. The removal of MD was 45.2% in ozonation, whereas the efficiency was achieved to 83.0% with the addition of Fe₃ O₄ @SiO₂ @CeO₂ . The results showed that Fe₃ O₄ @SiO₂ @CeO₂ could significantly improve the catalytic ozonation performance. And the enhanced mechanism study showed that it was attributed to promotion of ozone decomposition to generate hydroxyl radical. The reaction model was explored, and the reaction rates were calculated for the MD degradation in catalytic ozonation. A higher degradation efficiency of MD in catalytic ozonation was attributed to the enhanced surface effect of the catalysts, which was confirmed by using TBA, PO₄ ^3- , and p-BQ as scavengers of hydroxyl radical, surface reaction, and superoxide radical. The hydroxyl radical and superoxide radical played an important role in the degradation of MD. The mechanism of catalytic ozonation by Fe₃ O₄ @SiO₂ @CeO₂ was discussed via X-ray photoelectron spectroscopy (XPS) spectra and experimental data.

Exploiting the Potential of Supported Magnetic Nanomaterials as Fenton-Like Catalysts for Environmental Applications

In recent years, the application of magnetic nanoparticles as alternative catalysts to conventional Fenton processes has been investigated for the removal of emerging pollutants in wastewater. While this type of catalyst reduces the release of iron hydroxides with the treated effluent, it also presents certain disadvantages, such as slower reaction kinetics associated with the availability of iron and mass transfer limitations. To overcome these drawbacks, the functionalization of the nanocatalyst surface through the addition of coatings such as polyacrylic acid (PAA) and their immobilization on a mesoporous silica matrix (SBA15) can be factors that improve the dispersion and stability of the nanoparticles. Under these premises, the performance of the nanoparticle coating and nanoparticle-mesoporous matrix binomials in the degradation of dyes as examples of recalcitrant compounds were evaluated. Based on the outcomes of dye degradation by the different functionalized nanocatalysts and nanocomposites, the nanoparticles embedded in a mesoporous matrix were applied for the removal of estrogens (E1, E2, EE2), accomplishing high removal percentages (above 90%) after the optimization of the operational variables. With the feasibility of their recovery in mind, the nanostructured materials represented a significant advantage as their magnetic character allows their separation for reuse in different successive sequential batch cycles.

Precious-Metal-Decorated Chromium(IV) Oxide Nanowires as Efficient Catalysts for 2,4-Toluenediamine Synthesis

The catalytic hydrogenation of 2,4-dinitrotoluene (DNT) to 2,4-toluenediamine (TDA) is a key step in the production of polyurethanes; therefore, the development of efficient hydrogenation catalysts for industrial use is of paramount importance. In the present study, chromium(IV) oxide nanowires were decorated by palladium and platinum nanoparticles in a one-step, simple, and fast preparation method to yield highly efficient hydrogenation catalysts for immediate use. The nanoparticles were deposited onto the surface of CrO2 nanowires by using ultrasonic cavitation and ethanol as a reduction agent. Beneficially, the catalyst became catalytically active right at the end of the preparation and no further treatment was necessary. The activity of the Pd- and Pt-decorated CrO2 catalysts were compared in the hydrogenation of 2,4-dinitrotoluene (DNT). Both catalysts have shown high activity in the hydrogenation tests. The DNT conversion exceeded 98% in both cases, whereas the 2,4-toluenediamine (TDA) yields were 99.7 n/n% and 98.8 n/n%, with the Pd/CrO2 and Pt/CrO2, respectively, at 333 K and 20 bar H2 pressure. In the case of the Pt/CrO2 catalyst, 304.08 mol of TDA formed with 1 mol Pt after 1 h hydrogenation. Activation energies were also calculated to be approximately 24 kJ∙mol-1. Besides their immediate applicability, our catalysts were well dispersible in the reaction medium (methanolic solution of DNT). Moreover, because of their magnetic behavior, the catalysts were easy to handle and remove from the reaction media by using a magnetic field.

Fabrication of Magnetic Catalyst Fe3O4-SiO2-V3 and Its Application on Lignin Extraction from Corncob in Deep Eutectic Solvent

Fe3O4-SiO2-V3 was prepared by deposited H6PMo9V3O40 on Fe3O4-SiO2 and employed as a catalyst to extract lignin from corncob in deep eutectic solvent (choline chloride/lactic acid = 1/10). Batch experiments were conducted in an autoclave under the conditions of 500 kPa, 90-130 °C and 15 h, while the dosage of the catalyst was set as a variable. Results indicated that the catalyst could effectively improve the qualities of the lignin, while the characteristics of the lignin showed prominent changes with the participation of the catalyst: the extraction rate increased from 71.65% to 98.13%, the purity was improved from 85.62% to 97.09%, and both the number average molecular weight and the weight average molecular weight also decreased significantly. Besides, the molecular distribution of the lignin achieved from the CC-LA-Fe-Si-V3 reaction system was found to be more highly concentrated (Polydispersity index = 1.746). Results from 2D NMR HSQC analysis indicated that lignin fractions achieved from the CC-LA-Fe-Si-V3 system showed distinct destruction involving C2-H2 in guaiacyl units (G), C5-H5 in guaiacyl units (G), and the Cγ-Hγ in γ-hydroxylated β-O-4' substructures, but little changes in the Cγ-Hγ in phenylcoumaran substructures.

Removal of aniline from water by an Fe(II)-nano-Fe3O4@PAC heterogeneous catalyst in a Fenton-like process

Aniline is a toxic chemical, and in many industries it is degraded by Fenton processes. In this study, an Fe(II)-nano-Fe₃O₄@PAC heterogeneous Fenton catalyst (MFC) was prepared with a coprecipitation and impregnation method, which is simple, efficient and cost effective. The results of the magnetic performance tests showed that the MFC has typical ferromagnetism properties. Nano-Fe₃O₄ was found both on the surface and inside the pores of the powdered activated carbon (PAC). MFC was found to be an efficient catalyst in the Fenton-like process for aniline degradation. The optimal conditions were obtained by the orthogonal experimental method. The results showed that under the optimal conditions (pH = 3.00, temperature = 20°C, concentration of MFC = 1.0 g/L, concentration of H₂O₂ = 0.27 g/L), the 5 mg/L aniline solution degradation ratio reached 91.2% and the mineralization ratio reached 75.77% in 30 min. In addition, kinetics studies indicated that the aniline degradation process follows a pseudo-first-order kinetics model. No refractory intermediate such as azobenzene, was found during the reaction. The pH value is an important factor in aniline solution degradation. This result indicates that in addition to the surface catalytic reaction, the Fenton reaction also occurs in solution. Fe²⁺/Fe³⁺ on the MFC surface and Fe²⁺/Fe³⁺ in solution both affect aniline degradation. This catalyst has the advantage of being easily magnetically separated from the aqueous phase. It has useful application prospects in solving organic industrial wastewater pollutions in developing countries because of its cost-effectiveness.

Selective Oxidation of Ethane to Acetic Acid Catalyzed by a C-Scorpionate Iron(II) Complex: A Homogeneous vs. Heterogeneous Comparison

The direct, one-pot oxidation of ethane to acetic acid was, for the first time, performed using a C-scorpionate complex anchored onto a magnetic core-shell support, the Fe₃O₄/TiO₂/[FeCl₂{κ³-HC(pz)₃}] composite. This catalytic system, where the magnetic catalyst is easily recovered and reused, is highly selective to the acetic acid synthesis. The performed green metrics calculations highlight the “greeness” of the new ethane oxidation procedure.

Catalytic Performance of a Magnetic Core-Shell Iron(II) C-Scorpionate under Unconventional Oxidation Conditions

For the first time, herein is reported the use of a magnetic core-shell support for a C-scorpionate metallic complex. The prepared hybrid material, that consists on the C-scorpionate iron(II) complex [FeCl₂{κ³-HC(pz)₃}] (pz, pyrazolyl) immobilized at magnetic core-shell particles (Fe₃O₄/TiO₂), was tested as catalyst for the oxidation of secondary alcohols using the model substrate 1-phenylethanol. Moreover, the application of alternative energy sources (e.g., ultrasounds, microwaves, mechanical or thermal) for the peroxidative alcohol oxidation using the magnetic heterogenized iron(II) scorpionate led to different/unusual outcomes that are presented and discussed.

Synthesis of Petal-Like MnO2 Nanosheets on Hollow Fe3O4 Nanospheres for Heterogeneous Photocatalysis of Biotreated Papermaking Effluent

Owing to the implementation of increasingly stringent water conservation policies and regulations, the pulp and paper mill industry must make increased efforts to meet the limits for pollutant emissions. The primary pretreatment and secondary biochemical treatment methods used currently generally fail to meet the country-specific environmental regulations, and the wastewater must be processed further even after being subjected to secondary biochemical treatments. In this work, we synthesized Fe₃O₄/MnO₂ nanocomposites (FMNs) with a flower-like structure for use in the heterogeneous photocatalytic treatment of biotreated papermaking wastewater. FMNs1.25, which were formed using a KMnO₄/Fe₃O₄ molar ratio of 1.25, could be separated readily using an external magnetic field and exhibited higher photocatalytic activity than those of the other samples as well as MnO₂ and Fe₃O₄. The effects of various experimental parameters on the photocatalytic activity of FMNs1.25, including the initial pH of the wastewater and the catalyst dosage, were determined. The common chemical oxygen demand (COD_Cr) reduction rate in the case of this sample reached 56.58% within 120 min at a pH of 3, the COD_Cr of effluent after treatment was 52.10 mg/L. Further, even under neutral conditions, the COD_Cr of the treated effluent was below the current limit for discharge in China. Moreover, the nanocomposites exhibited good recyclability, and their catalytic activity did not decrease significantly even after five usage cycles. This study should serve as a platform for the fabrication of effective photocatalysts for the advanced treatment of biotreated papermaking effluent and refractory organic wastewater.

High-Efficient and Recyclable Magnetic Separable Catalyst for Catalytic Hydrogenolysis of β-O-4 Linkage in Lignin

Lignin is recognized as a good sustainable material because of its great abundance and potential applications. At present, lignin hydrogenolysis is considered as a potential but challenging way to produce low-molecular-mass aromatic chemicals. The most common linkage between the structural units of lignin polymer is the β-O-4 aryl ether, which are primary or even only target chemical bonds for many degradation processes. Herein, a Pd-Fe₃O₄ composite was synthesized for catalytic hydrogenolysis of β-O-4 bond in lignin. The synthesized catalyst was characterized by XRD, XPS, and SEM and the lignin depolymerization products were analyzed by GC-MS. The catalyst showed good catalytic performance during the hydrogenolysis process, lignin dimer was degraded into monomers completely and a high yield of monomers was obtained by the hydrogenolysis of bagasse lignin. More importantly, the magnetic catalyst was separated conveniently by magnet after reaction and remained highly catalytically efficient after being reused for five times. This work has demonstrated an efficient & recyclable catalyst for the cleavage of the β-O-4 bond in lignin providing an alternative way to make better use of lignins.