Ternary ReS2(1-x)Se2xalloys of different composition for Q-switched and mode-locked all-fiber laser

This paper systematically studied the composition-controlled nonlinear optical properties and pulse modulation of ternary ReS2(1-x)Se2xalloys for the first time. The compositionally modulated characteristics of ReS2(1-x)Se2xon the band gap were simulated based on the first principles. We investigated the effect of the band gap on the saturable absorption properties. In addition, we demonstrated the modulation characteristics of different components ReS2(1-x)Se2xon 1.5μm Q-switched pulse performance. The Q-switched threshold, repetition rate, and pulse duration increase as the S(sulfur)-element composition rise. And pulse energy also was affected by the S(sulfur)-element composition. The ReS0.8Se1.2SA was selected to realize a conventional soliton with high energy in the all-fiber mode-locked laser. The pulse was centered at 1562.9 nm with a pulse duration of 2.26 ps, a repetition rate of 3.88 MHz, and maximum pulse energy of 1.95 nJ. This work suggests that ReS2(1-x)Se2xhas great potential in laser technology and nonlinear optics, and widely extends the material applications in ultrafast photonics.

Mode-Locked Operation of High-Order Transverse Modes in a Vertical-External-Cavity Surface-Emitting Laser

Understanding the mechanism of mode-locking in a laser with high-order transverse mode is important for achieving an ultrashort pulses train under more complicated conditions. So far, mode-locking with high-order transverse mode has not been reported in other lasers except the multimode fiber laser. This paper demonstrates robust mode-locking with high-order transverse mode in a Kerr-lens mode-locked vertical-external-cavity surface-emitting laser for the first time, to the best of our knowledge. While the longitudinal modes are locked, continuous mode-locking accompanied by high-order transverse mode up to TEM40 is observed. The threshold of the mode-locking is only a little bigger than that of the lasing. After the laser oscillation is built up, the mode-locked pulse train can be obtained almost immediately and maintained until the thermal rollover of the laser. Output powers of 717 mW under fundamental mode and 666 mW under high-order transverse mode are achieved with a 4.3 ps pulse duration and 1.1 GHz pulses repetition rate, and some phenomenological explanations to the related characteristics of the mode-locked operation of high-order transverse mode in the vertical-external-cavity surface-emitting laser are proposed.

Dual Regime Mode-Locked and Q-Switched Erbium-Doped Fiber Laser by Employing Graphene Filament-Chitin Film-Based Passive Saturable Absorber

We investigate the dynamics of high energy dual regime unidirectional Erbium-doped fiber laser in ring cavity, which is passively Q-switched and mode-locked through the use of an environmentally friendly graphene filament-chitin film-based saturable absorber. The graphene-chitin passive saturable absorber allows the option for different operating regimes of the laser by simple adjustment of the input pump power, yielding, simultaneously, highly stable and high energy Q-switched pulses at 82.08 nJ and 1.08 ps mode-locked pulses. The finding can have applications in a multitude of fields due to its versatility and the regime of operation that is on demand.

Dumbbell-Shaped Ho-Doped Fiber Laser Mode-Locked by Polymer-Free Single-Walled Carbon Nanotubes Saturable Absorber

We propose a simple dumbbell-shaped scheme of a Holmium-doped fiber laser incorporating a minimum number of optical elements. Mode-locking regimes were realized with the help of polymer-free single-walled carbon nanotubes (SWCNTs) synthesized using an aerosol (floating catalyst) CVD method. We show that such a laser scheme is structurally simple and more efficient than a conventional one using a ring cavity and a similar set of optical elements. In addition, we investigated the effect of SWCNT film transmittance, defined by the number of 40 nm SWCNT layers on the laser's performance: operating regimes, stability, and self-starting. We found that three SWCNT layers with an initial transmittance of about 40% allow stable self-starting soliton mode-locking at a wavelength of 2076 nm with a single pulse energy of 0.6 nJ and a signal-to-noise ratio of more than 60 dB to be achieved.

Ultrafast Pulse Generation from Quantum Cascade Lasers

Quantum cascade lasers (QCLs) have broken the spectral barriers of semiconductor lasers and enabled a range of applications in the mid-infrared (MIR) and terahertz (THz) regimes. However, until recently, generating ultrashort and intense pulses from QCLs has been difficult. This would be useful to study ultrafast processes in MIR and THz using the targeted wavelength-by-design properties of QCLs. Since the first demonstration in 2009, mode-locking of QCLs has undergone considerable development in the past decade, which includes revealing the underlying mechanism of pulse formation, the development of an ultrafast THz detection technique, and the invention of novel pulse compression technology, etc. Here, we review the history and recent progress of ultrafast pulse generation from QCLs in both the THz and MIR regimes.

High-Yield Exfoliation of Monolayer 1T'-MoTe2 as Saturable Absorber for Ultrafast Photonics

Liquid-phase exfoliation can be developed for the large-scale production of two-dimensional materials for photonic applications. Although atomically thin 2D transition metal dichalcogenides (TMDs) show enhanced nonlinear optical properties or photoluminescence quantum yield relative to the bulk phase, these properties are weak in the absolute sense due to the ultrashort optical path, and they are also sensitive to layer-dependent symmetry properties. Another practical issue is that the chemical stability of some TMDs (e.g., Weyl semimetals) decreases dramatically as the thickness scales down to monolayer, precluding application as optical components in air. To address these issues, a way of exfoliating TMDs that ensures instantaneous passivation needs to be developed. Here, we employed a polymer-assisted electrochemical exfoliation strategy to synthesize PVP-passivated TMDs monolayers that could be spin coated and restacked into organic-inorganic superlattices with well-defined X-ray diffraction patterns. The segregation of restacked TMDs (e.g., MoS₂) by PVP allows the inversion asymmetry of individual layers to be maintained in these superlattices, which allows second harmonic generation and photoluminescence to be linearly scaled with thickness. PVP-passivated monolayer 1T'-MoTe₂ saturable absorber fabricated from these flakes exhibits fast response and recovery time (<150 fs) and pulse stability. Continuous-wave mode-locking based on 1T'-MoTe₂ saturable absorber in a fiber ring laser cavity has been realized, attaining a fundamental repetition rate of 3.15 MHz and pulse duration as short as 867 fs at 1563 nm.

A Review on Rhenium Disulfide: Synthesis Approaches, Optical Properties, and Applications in Pulsed Lasers

Rhenium Disulfide (ReS₂) has evolved as a novel 2D transition-metal dichalcogenide (TMD) material which has promising applications in optoelectronics and photonics because of its distinctive anisotropic optical properties. Saturable absorption property of ReS₂ has been utilized to fabricate saturable absorber (SA) devices to generate short pulses in lasers systems. The results were outstanding, including high-repetition-rate pulses, large modulation depth, multi-wavelength pulses, broadband operation and low saturation intensity. In this review, we emphasize on formulating SAs based on ReS₂ to produce pulsed lasers in the visible, near-infrared and mid-infrared wavelength regions with pulse durations down to femtosecond using mode-locking or Q-switching technique. We outline ReS₂ synthesis techniques and integration platforms concerning solid-state and fiber-type lasers. We discuss the laser performance based on SAs attributes. Lastly, we draw conclusions and discuss challenges and future directions that will help to advance the domain of ultrafast photonic technology.

Germanium Nanosheets with Dirac Characteristics as a Saturable Absorber for Ultrafast Pulse Generation

Bulk germanium as a group-IV photonic material has been widely studied due to its relatively large refractive index and broadband and low propagation loss from near-infrared to mid-infrared. Inspired by the research of graphene, the 2D counterpart of bulk germanium, germanene, has been discovered and the characteristics of Dirac electrons have been observed. However, the optical properties of germanene still remain elusive. In this work, several layers of germanene are prepared with Dirac electronic characteristics and its morphology, band structure, carrier dynamics, and nonlinear optical properties are systematically investigated. It is surprisingly found that germanene has a fast carrier-relaxation time comparable to that of graphene and a relatively large nonlinear absorption coefficient, which is an order of magnitude higher than that of graphene in the near-infrared wavelength range. Based on these findings, germanene is applied as a new saturable absorber to construct an ultrafast mode-locked laser, and sub-picosecond pulse generation in the telecommunication band is realized. The results suggest that germanene can be used as a new type of group-IV material for various nonlinear optics and photonic applications.

The Investigation on Ultrafast Pulse Formation in a Tm-Ho-Codoped Mode-Locking Fiber Oscillator

We experimentally investigate the formation of various pulses from a thulium–holmium (Tm–Ho)-codoped nonlinear polarization rotation (NPR) mode-locking fiber oscillator. The ultrafast fiber oscillator can simultaneously operate in the noise-like and soliton mode-locking regimes with two different emission wavelengths located around 1947 and 2010 nm, which are believed to be induced from the laser transition of Tm³⁺ and Ho³⁺ ions respectively. When the noise-like pulse (NLP) and soliton pulse (SP) co-exist inside the laser oscillator, a maximum output power of 295 mW is achieved with a pulse repetition rate of 19.85-MHz, corresponding to a total single pulse energy of 14.86 nJ. By adjusting the wave plates, the fiber oscillator could also deliver the dual-NLPs or dual-SPs at dual wavelengths, or single NLP and single SP at one wavelength. The highest 61-order harmonic soliton pulse and 33.4-nJ-NLP are also realized respectively with proper design of the fiber cavity.

Tunable and Passively Mode-Locking Nd0.01:Gd0.89La0.1NbO4 Picosecond Laser

A high-quality Nd_0.01:Gd_0.89La_0.1NbO₄ (Nd:GLNO) crystal is grown by the Czochralski method, demonstrating wide absorption and fluorescence spectra and advantage for producing ultrafast laser pulses. In this paper, the tunable and passively mode-locking Nd:GLNO lasers are characterized for the first time. The tuning coverage is 34.87 nm ranging from 1058.05 to 1092.92 nm with a maximum output power of 4.6 W at 1065.29 nm. A stable continuous-wave (CW) passively mode-locking Nd:GLNO laser is achieved at 1065.26 nm, delivering a pulse width of 9.1 ps and a maximum CW mode-locking output power of 0.27 W.

Two-Dimensional Bi2Sr2CaCu2O8+δ Nanosheets for Ultrafast Photonics and Optoelectronics

Two-dimensional (2D) Bi₂Sr₂CaCu₂O_8+δ (BSCCO) is a emerming class of 2D materials with high-temperature superconductivity for which their electronic transport properties have been intensively studied. However, the optical properties, especially nonlinear optical response and the photonic and optoelectronic applications of normal state 2D Bi₂Sr₂CaCu₂O_8+δ (Bi-2212), have been largely unexplored. Here, the linear and nonlinear optical properties of mechanically exfoliated Bi-2212 thin flakes are systematically investigated. 2D Bi-2212 shows a profound plasmon absorption in near-infrared wavelength range with ultrafast carrier dynamics as well as tunable nonlinear absorption depending on the thickness. We demonstrated that 2D Bi-2212 can be applied not only as an effective mode-locker for ultrashort pulse generation but also as an active medium for infrared light detection due to its plasmon absorption. Our results may trigger follow up studies on the optical properties of 2D BSCCO and demonstrate potential opportunities for photonic and optoelectronic applications.

Graphene Capacitor-Based Electrical Switching of Mode-Locking in All-Fiberized Femtosecond Lasers

Effective high-capacity data management necessitates the use of ultrafast fiber lasers with mode-locking-based femtosecond pulse generation. We suggest a simple but highly efficient structure of a graphene saturable absorber in the form of a graphene/poly(methyl methacrylate) (PMMA)/graphene capacitor and demonstrate the generation of ultrashort pulses by passive mode-locking in a fiber ring laser cavity, with simultaneous electrical switching (on/off) of the mode-locking operation. The voltage applied to the capacitor shifts the Fermi level of the graphene layers, thereby controlling their nonlinear light absorption, which is directly correlated with mode-locking. The flexible PMMA layer used for graphene transfer also acts as a dielectric layer to realize a very simple but effective capacitor structure. By employing the graphene capacitor on the polished surface of a D-shaped fiber, we demonstrate the switching of the mode-locking operation reversibly from the femtosecond pulse regime to a continuous wave regime of the ring laser with an extinction ratio of 70.4 dB.

Passively Mode-Locked Fiber Laser with WS2/SiO2 Saturable Absorber Fabricated by Sol-Gel Technique

High-performance ultrafast fiber lasers require saturable absorbers (SAs) of high optical damage threshold and high operation stability. Here, the optical properties and application of the WS₂/SiO₂ SA prepared by the sol-gel method are reported. SiO₂ prepared by sol-gel technique has similar properties to fiber in ultrafast fiber lasers, such as mechanical strength, refractive index, optical transmission, and absorption. For the SA device by the sol-gel method combined with WS₂ material, not only will the additional scattering loss not be introduced, but also, the damage threshold of the SA device can be effectively increased. Furthermore, SA material is wrapped by SiO₂, which insulates the influence of the external environment. Based on the first preparation of the WS₂/SiO₂ glass SA, stable soliton pulses are obtained in ytterbium-doped fiber lasers (YDFLs) with a pulse width of 58 ps, an average output power of 56.8 mW, and a repetition rate of 19.03 MHz. In addition, a stable mode-locked operation with a pulse width of 325 fs and an output power of 39.6 mW is also achieved in an erbium-doped fiber laser (EDFL). These results demonstrate that the WS₂/SiO₂ glass prepared by the sol-gel method can significantly increase laser output power and shorten pulse width in the fiber laser, which provides a new opportunity for the traditional preparation method of the SA device.

Highly stable and repeatable femtosecond soliton pulse generation from saturable absorbers based on two-dimensional Cu3-xP nanocrystals

Heavily doped colloidal plasmonic nanocrystals have attracted great attention because of their lower and adjustable free carrier densities and tunable localized surface plasmonic resonance bands in the spectral range from near-infra to mid-infra wavelengths. With its plasmon-enhanced optical nonlinearity, this new family of plasmonic materials shows a huge potential for nonlinear optical applications, such as ultrafast switching, nonlinear sensing, and pulse laser generation. Cu_3-xP nanocrystals were previously shown to have a strong saturable absorption at the plasmonic resonance, which enabled high-energy Q-switched fiber lasers with 6.1 μs pulse duration. This work demonstrates that both high-quality mode-locked and Q-switched pulses at 1560 nm can be generated by evanescently incorporating two-dimensional (2D) Cu_3-xP nanocrystals onto a D-shaped optical fiber as an effective saturable absorber. The 3 dB bandwidth of the mode-locking optical spectrum is as broad as 7.3 nm, and the corresponding pulse duration can reach 423 fs. The repetition rate of the Q-switching pulses is higher than 80 kHz. Moreover, the largest pulse energy is more than 120 µJ. Note that laser characteristics are highly stable and repeatable based on the results of over 20 devices. This work may trigger further investigations on heavily doped plasmonic 2D nanocrystals as a next-generation, inexpensive, and solution-processed element for fascinating photonics and optoelectronics applications.

Light bullets in a time-delay model of a wide-aperture mode-locked semiconductor laser

Recently, a mechanism of formation of light bullets (LBs) in wide-aperture passively mode-locked lasers was proposed. The conditions for existence and stability of these bullets, found in the long cavity limit, were studied theoretically under the mean field (MF) approximation using a Haus-type model equation. In this paper, we relax the MF approximation and study LB formation in a model of a wide-aperture three section laser with a long diffractive section and short absorber and gain sections. To this end, we derive a non-local delay-differential equation (NDDE) model and demonstrate by means of numerical simulations that this model supports stable LBs. We observe that the predictions about the regions of existence and stability of the LBs made previously using MF laser models agree well with the results obtained using the NDDE model. Moreover, we demonstrate that the general conclusions based upon the Haus model that regard the robustness of the LBs remain true in the NDDE model valid beyond the MF approximation, when the gain, losses and diffraction per cavity round trip are not small perturbations anymore.This article is part of the theme issue 'Dissipative structures in matter out of equilibrium: from chemistry, photonics and biology (part 1)'.

Two-Dimensional CH3NH3PbI3 Perovskite Nanosheets for Ultrafast Pulsed Fiber Lasers

Even though the nonlinear optical effects of solution processed organic-inorganic perovskite films have been studied, the nonlinear optical properties in two-dimensional (2D) perovskites, especially their applications for ultrafast photonics, are largely unexplored. In comparison to bulk perovskite films, 2D perovskite nanosheets with small thicknesses of a few unit cells are more suitable for investigating the intrinsic nonlinear optical properties because bulk recombination of photocarriers and the nonlinear scattering are relatively small. In this research, we systematically investigated the nonlinear optical properties of 2D perovskite nanosheets derived from a combined solution process and vapor phase conversion method. It was found that 2D perovskite nanosheets have stronger saturable absorption properties with large modulation depth and very low saturation intensity compared with those of bulk perovskite films. Using an all dry transfer method, we constructed a new type of saturable absorber device based on single piece 2D perovskite nanosheet. Stable soliton state mode-locking was achieved, and ultrafast picosecond pulses were generated at 1064 nm. This work is likely to pave the way for ultrafast photonic and optoelectronic applications based on 2D perovskites.

Room temperature passive mode-locked laser based on InAs/GaAs quantum-dot superlattice

Passive mode-locking is achieved in two sectional lasers with an active layer based on superlattice formed by ten layers of quantum dots. Tunnel coupling of ten layers changes the structural polarization properties: the ratio between the transverse electric and transverse magnetic polarization absorption coefficients is less by a factor of 1.8 in the entire electroluminescence spectrum range for the superlattice.

Soliton Thulium-Doped Fiber Laser With Carbon Nanotube Saturable Absorber

We report stabilization of a thulium-holmium codoped fiber soliton laser with a saturable absorber based on carbon nanotubes. The laser generates transform-limited 750-fs pulses with 0.5-nJ energy.