Surface Glass Transition Temperature Region of Diarylethene Films Determined by Nano-Marangoni Effect

For the last two decades, research has addressed whether the glass transition temperature and the molecular motions on the surface of organic films are significantly different from those inside the bulk glasses. It is reported that the surface of the photochromic diarylethene film prepared by vacuum deposition has fluidity and the vacuum deposition of small amount of rubrene molecules induces surface tension fluctuations, generating dents due to the Marangoni flow in nanoscale. The depth of the dents increases in proportion to these radii for the colorless diarylethene film with a bulk glass transition temperature (Tg) close to room temperature. On the other hand, in the colored diarylethene obtained by UV irradiation to the colorless film, the depth becomes constant at a certain level. The Tg distribution in the depth direction is clarified based on an analysis of the dent depth. By approximating the obtained Tg depth distribution with an exponential function, the outermost surface Tg is about 100 K lower than the bulk Tg in the case of photoisomerized diarylethene.

Design of a Structure for Optimized Optical Performance of a Full Colored Organic Light-Emitting Diode on a Parameter Space Map

In general, optical properties of a top-emitting organic light-emitting diode (OLED) are dependent on the cavity effect of the OLED structure. Therefore, the optical path length of the many thin solid films in the OLED, which is strongly affected by the refractive index and thickness of each material, controls the cavity effect of the cell. In previous research, a parameter space method for optimizing the inorganic layer thickness of a red OLED structure was introduced to achieve the required bandwidth and peak wavelength. This is a simple method with high accuracy and can also be applied to red, green, and blue OLED structures. To design an OLED cell with a practical approach, however, the RGB OLED device requires the thickness of each inorganic layer and organic layer in all three R, G, and B OLED structures to be same. In this study, we applied the parameter space method to an RGB OLED device to find out and optimize the thickness of three inorganic parameters: Indium Tin Oxide (ITO), cathode, and capping layer (CPL) using the finite-difference time-domain (FDTD) method. The parameters ITO, cathode, and CPL were scanned from 18 to 21 nm, 5 to 100 nm, and 10 to 200 nm, respectively. The peak wavelength and bandwidth lines of the three spectral colors were placed on a map of the three inorganic layer thickness parameters to find the optimized points that can provide the desired optical characteristics with the same film thickness in the cell.

Ultrasmooth Organic Films Via Efficient Aggregation Suppression by a Low-Vacuum Physical Vapor Deposition

Organic thin films with smooth surfaces are mandated for high-performance organic electronic devices. Abrupt nucleation and aggregation during film formation are two main factors that forbid smooth surfaces. Here, we report a simple fast cooling (FC) adapted physical vapor deposition (FCPVD) method to produce ultrasmooth organic thin films through effectively suppressing the aggregation of adsorbed molecules. We have found that thermal energy control is essential for the spread of molecules on a substrate by diffusion and it prohibits the unwanted nucleation of adsorbed molecules. FCPVD is employed for cooling the horizontal tube-type organic vapor deposition setup to effectively remove thermal energy applied to adsorbed molecules on a substrate. The organic thin films prepared using the FCPVD method have remarkably ultrasmooth surfaces with less than 0.4 nm root mean square (RMS) roughness on various substrates, even in a low vacuum, which is highly comparable to the ones prepared using conventional high-vacuum deposition methods. Our results provide a deeper understanding of the role of thermal energy employed to substrates during organic film growth using the PVD process and pave the way for cost-effective and high-performance organic devices.

Kinetic multi-layer model of film formation, growth, and chemistry (KM-FILM): Boundary layer processes, multi-layer adsorption, bulk diffusion, and heterogeneous reactions

Large surface area-to-volume ratios indoors cause heterogeneous interactions to be especially important. Semi-volatile organic compounds can deposit on impermeable indoor surfaces forming thin organic films. We developed a new model to simulate the initial film formation by treating gas-phase diffusion and turbulence through a surface boundary layer and multi-layer reversible adsorption on rough surfaces, as well as subsequent film growth by resolving bulk diffusion and chemical reactions in a film. The model was applied with consistent parameters to reproduce twenty-one sets of film formation measurements due to multi-layer adsorption of multiple phthalates onto different indoor-relevant surfaces, showing that the films should initially be patchy with the formation of pyramid-like structures on the surface. Sensitivity tests showed that highly turbulent conditions can lead to the film growing by more than a factor of two compared to low turbulence conditions. If surface films adopt an ultra-viscous state with bulk diffusion coefficients of less than 10^-18  cm² s^-1 , a significant decrease in film growth is expected. The presence of chemical reactions in the film has the potential to increase the rate of film growth by nearly a factor of two.

Fabrication of Gradient and Patterned Organic Thin Films by Bipolar Electrolytic Micelle Disruption Using Redox-Active Surfactants

Bipolar electrochemistry could be regarded as a powerful approach for selective surface modification due to the beneficial feature that a wirelessly controllable potential distribution on bipolar electrodes (BPEs). Herein we report a bipolar electrolytic micelle disruption (BEMD) system for the preparation of shaped organic films. A U-shaped bipolar electrolytic system with a sigmoidal potential gradient on the BPE gave gradient-thin films including various interesting organic compounds, such as a polymerizable monomer, an organic pigment and aggregation induced emission (AIE) molecules. The gradient feature was characterized by UV-Vis absorption, thickness measurements and surface morphology analysis. Corresponding patterned films were also fabricated using a cylindrical bipolar electrolytic setup that enables site-selective application of the potential on the BPE. Such a facile BEMD approach will open a long-term perspective with respect to organic film preparation.

Confined Hot Electron Relaxation at the Molecular Heterointerface of the Size-Selected Plasmonic Noble Metal Nanocluster and Layered C60

The plasmonic response of metallic nanostructures plays a key role in amplifying photocatalytic and photoelectric conversion. Since the plasmonic behavior of noble metal nanoparticles is known to generate energetic charge carriers such as hot electrons, it is expected that the hot electrons can enhance conversion efficiency if they are transferred into a neighboring molecule or semiconductor. However, the method of transferring the energized charge carriers from the plasmonically generated hot electrons to the neighboring species remains controversial. Herein, we fabricated a molecularly well-defined heterointerface between the size-selected plasmonic noble-metal nanoclusters (NCs) of Ag_n (n = 3-55)/Au_n (n = 21) and the organic C₆₀ film to investigate hot electron generation and relaxation dynamics using time-resolved two-photon photoemission (2PPE) spectroscopy. By tuning the NC size and the polarization of the femtosecond excitation photons, the plasmonic behavior is characterized by 2PPE intensity enhancement by 10-100 times magnitude, which emerge at n ≥ 9 for Ag_n NCs. The 2PPE spectra exhibit contributions from low-energy electrons forming coherent plasmonic currents and hot electrons with an excitation energy up to photon energy owing to two-photon excitation of an occupied state of the Ag_n NC below the Fermi level. The time-resolved pump-probe measurements demonstrate that plasmon dephasing generates hot electrons which undergo electron-electron scattering. However, no photoemission occurs via the charge transfer state forming Ag_n⁺C₆₀^- located in the vicinity of the Fermi level. Thus, this study reveals the mechanism of ultrafast confined hot electron relaxation within plasmonic Ag_n NCs at the molecular heterointerface.

Controlling the electronic and physical coupling on dielectric thin films

Ultrathin dielectric/insulating films on metals are often used as decoupling layers to allow for the study of the electronic properties of adsorbed molecules without electronic interference from the underlying metal substrate. However, the presence of such decoupling layers may effectively change the electron donating properties of the substrate, for example, by lowering its work function and thus enhancing the charging of the molecular adsorbate layer through electron tunneling. Here, an experimental study of the charging of para-sexiphenyl (6P) on ultrathin MgO(100) films supported on Ag(100) is reported. By deliberately changing the work function of the MgO(100)/Ag(100) system, it is shown that the charge transfer (electronic coupling) into the 6P molecules can be controlled, and 6P monolayers with uncharged molecules (Schottky-Mott regime) and charged and uncharged molecules (Fermi level pinning regime) can be obtained. Furthermore, it was found that charge transfer and temperature strongly influence the orientation, conformation, and wetting behavior (physical coupling) of the 6P layers on the MgO(100) thin films.

Van der Waals Bound Organic/2D Insulator Hybrid Structures: Epitaxial Growth of Acene Films on hBN(001) and the Influence of Surface Defects

Combining 2D materials with functional molecular films enables the fabrication of van der Waals bound organic/inorganic hybrids that are of interest for future device architectures. Recently, the 2D dielectric hexagonal boron nitride (hBN) has received particular attention since exfoliation allows the preparation of crystalline layers which have been utilized as ultrathin dielectrics in electronic devices. Here, we have studied the formation and structure of molecular films of the prototypical organic semiconductors pentacene (PEN) and perfluoropentacene (PFP) on hBN. Special attention was paid to the influence of substrate surface defects on the film formation by comparing molecular films that were grown on hBN substrates of various quality, including single crystals (representing the most ideal surface), briefly ion bombarded substrates, and exfoliated flakes. While X-ray diffraction (XRD) yields precise information about the crystalline structure of films grown on (large) single crystals, it is hardly applicable to analyze the films formed on exfoliated flakes because of their small size. Here, we demonstrate that in the case of flakes detailed structural analyses of the molecular films are possible by combining atomic force microscopy (AFM) with microspot UV/vis spectroscopy and optical polarization microscopy. On well-ordered hBN single crystal surfaces both acenes form very smooth and epitaxial crystalline films where molecules adopt a recumbent orientation (even in 100 nm thick films). By contrast, both materials adopt an upright molecular orientation and different polymorphs on defective hBN surfaces and reveal distinctly different film morphologies. On exfoliated flakes, PFP shows a film structure similar to that on the hBN single crystals, while PEN films exhibit a structure as on defective hBN substrates. In addition, a pronounced decoration of defect steps, which are probably created by the exfoliation process, was observed for PEN leading to the formation of tall and extended fibers where molecules adopt a recumbent orientation. The present study reveals different robustness in film growth on exfoliated hBN flakes for various molecules, which has to be considered in their device integration, especially with regard to their optoelectronic properties such as light absorption or charge transport, which depend critically on the molecular orientation and crystalline order.

Visualization of Surface Plasmons Propagating at the Buried Organic/Metal Interface with Silver Nanocluster Sensitizers

Visualization of surface plasmon polariton (SPP) propagation at dielectric/metal interfaces is indispensable in providing opportunities for the precise designing and controlling of the functionalities of future plasmonic nanodevices. Here, we report the visualization of SPPs propagating along the buried organic/metal interface of fullerene (C₆₀)/Au(111), through dual-colored two-photon photoemission electron microscopy (2P-PEEM) which precisely visualizes the SPP propagation of plasmonic metal nanostructures. Although SPPs excited by near-infrared photons at the few monolayer C₆₀/Au(111) interface are clearly visualized as interference beat patterns between the SPPs and incident light, faithfully reflecting SPP properties modulated by the overlayer, photoemission signals are suppressed for thicker C₆₀ films, due to less valence electrons participating in 2P-photoemission processes. With the use of silver (Ag_n (n = 21 and 55)) nanoclusters, which exhibit enhancement of overall photoemission intensities due to localized surface plasmons functioning as SPP sensitizers, it is revealed that the 2P-PEEM is applicable to the imaging of SPPs for thick C₆₀/Au(111) interfaces, where SPP properties are hardly modulated by the added small amount (∼0.1 monolayer) of Ag_n sensitizers.

Quadratic Non-Linear Optical Properties of the poly(2,5-bis(but-2-ynyloxy) Benzoate Containing the 2-(ethyl(4-((4-nitrophenyl)buta-1,3-diynyl)phenyl)amino)ethanol) Chromophore

Excellent quadratic non-linear optical (ONL-2) properties of the poly(2,5-bis(but-2-ynyloxy) benzoate, containing a polar diacetylene as a chromophore, were found. According with the Maker fringes method, oriented polymer films showing an order parameter of ∼0.23 can display outstanding and stable Second Harmonic Generation (SHG) effects under off-resonant conditions (SHG-532 nm). Also, the macroscopic non-linear optical (NLO)-coefficients were evaluated under the rod-like molecular approximation, obtaining: χ_zzz⁽²⁾ and χ_zxx⁽²⁾ in the order of 280 ± 10 and 100 ± 10 pm V^-1, respectively. The mechanical and chemical properties, in addition to the large ONL-2 coefficients exhibited by this polymer, make it a promising organic material in the development of optoelectronic/photonic devices.

Freestanding Organic Charge-Transfer Conformal Electronics

Wearable conformal electronics are essential components for next-generation humanlike sensing devices that can accurately respond to external stimuli in nonplanar and dynamic surfaces. However, to explore this potential, it is indispensable to achieve the desired level of deformability and charge-transport mobility in strain-accommodating soft semiconductors. Here, we show pseudo-two-dimensional freestanding conjugated polymer heterojunction nanosheets integrated into substrate-free conformal electronics owing to their exceptional crystalline controlled charge transport and high level of mechanical strength. These freestanding and mechanical robust polymer nanosheets can be adapted into a variety of artificial structured surfaces such as fibers, squares, circles, etc., which produce large-area stretchable conformal charge-transfer sensors for real-time static and dynamic monitoring.

Heterogeneous oxidation of indoor surfaces by gas-phase hydroxyl radicals

We investigate heterogeneous oxidation kinetics of monolayer-thick, surface-sorbed organics, namely di-n-octyl phthalate (DnOP) and palmitic acid (PA), with gas-phase OH. The pseudo-first order rate constants for organic loss at OH concentrations of 1.6 × 108  molecules/cm3 are: (2.3 ± 0.1) × 10-4 to (4.8 ± 0.8) × 10-4  s-1 , and (1.3 ± 0.5) × 10-4  s-1 for DnOP and PA, respectively. Films developed in indoor office environments over a few weeks are also oxidized using the same OH concentration. Heterogeneous decay rate constants of mass signals from these films, attributed to phthalates (MW = 390.6) and to PA, are similar to those for the single-component films, ie, (1.9 ± 0.4) × 10-4 to (3.4 ± 0.5) × 10-4  s-1 , and (1.1 ± 0.4) × 10-4  s-1 , respectively. These results suggest that the lifetimes for OH heterogeneous oxidation of monolayer-thick indoor organic films will be on the timescale of weeks to months. To support this argument, we present the first analysis of the mass transfer processes that occur when short-lived gas-phase molecules, such as OH, are taken up by reactive indoor surfaces. Due to rapid chemical production, the diffusion limitation to mass transfer is less important for short-lived molecules than for molecules with little chemical production, such as ozone.

The influence of organic-film morphology on the efficient electron transfer at passivated polymer-modified electrodes to which nanoparticles are attached

The impact of polymer-film morphology on the electron-transfer process at electrode/organic insulator/nanomaterial architectures is studied. The experimental data are discussed in the context of the most recent theory modelling the nanoparticle-mediated electron-transfer process at electrode/insulator/nanomaterial architectures proposed by Chazalviel and Allongue [J. Am. Chem. Soc. 2011, 133, 762-764]. A previous report [Anal. Chem. 2013, 85, 1073-1080] by us qualitatively verified the theory and demonstrates a transition from thickness-independent to thickness-dependent electron transfer as the layer thickness exceeds a certain threshold. This follow-up study explores a different polymer, poly(phenylenediamine), and focuses on the effect of the uniformity of organic film on electron transfer at these hybrid structures. Electron-transfer kinetics of modified surfaces, which were assessed using the redox species Ru(NH3)6(3+) in aqueous solution, showed that a thickness-dependent electron-transfer regime is achieved with poly(phenylenediamine). This is attributed to the sufficiently thin films never being fabricated with this polymer. Rather, it is suggested that thin poly(phenylenediamine) layers have a globular structure with poor film homogeneity and pinhole defects.

Molecular engineering of surfaces using self-assembled monolayers

The self-assembly of molecules into structurally organized monolayers (SAMs) uses the flexibility of organic chemistry and coordination chemistry to generate well-defined, synthetic surfaces with known molecular and macroscopic properties. The process of designing monolayers with a specified structure gives a high level of control over the molecular-level composition in the direction perpendicular to a surface; soft lithographic technique gives useful (if lower) resolution in the plane of the surface. Alkanethiolates adsorbed on gold, silver, mercury, palladium and platinum are currently the best-defined systems of SAMs. They provide substrates for a number of applications-from studies of wetting and electron transport to patterns for growing mammalian cells. SAMs have made organic surfaces a central part of surface science. Understanding the principles by which they form, and connecting molecular-level structure with macroscopic properties, opens a wide range of areas to study and exploitation.