1
|
High Breakthrough Pressure in Hydrogels Enabled Ultrastable Treatment of Hypersaline Wastewaters. NANO LETTERS 2024; 24:4202-4208. [PMID: 38547140 DOI: 10.1021/acs.nanolett.4c00219] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 04/11/2024]
Abstract
Surface effects of low-surface-tension contaminants accumulating at the evaporation surface easily induce wetting in membrane distillation, especially in hypersaline scenarios. Herein, we propose a novel strategy to eliminate the surface effect and redistribute contaminants at the evaporation interface simply by incorporating a layer of hydrogel. The as-fabricated composite membrane exhibits remarkable stability, even when exposed to solution with salt concentration of 5 M and surfactant concentration of 8 mM. Breakthrough pressure of the membrane reaches 20 bar in the presence of surfactants, surpassing commercial hydrophobic membranes by one to two magnitudes. Density functional theory and molecular dynamics simulations reveal the important role of the hydrogel-surfactant interaction in suppressing the surface effect. As a proof of concept, we demonstrate the membrane in stably processing synthetic wastewater containing 144 mg L-1 surfactants, 1 g L-1 mineral oils, and 192 g L-1 NaCl, showing its potential in addressing challenges of hypersaline water treatment.
Collapse
|
2
|
Surface Effect of Thickness-Dependent Polarization and Domain Evolution in BiFeO 3 Epitaxial Ultrathin Films. ACS APPLIED MATERIALS & INTERFACES 2024; 16:1074-1081. [PMID: 38149600 DOI: 10.1021/acsami.3c14561] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/28/2023]
Abstract
With the trend of device miniaturization, ultrathin ferroelectric films are gaining more and more attention. However, understanding ferroelectricity in this nanoscale context remains a formidable challenge, primarily due to the heightened relevance of surface effects, which often leads to the loss of net polarization. Here, the influence of surface effects on the polarization as a function of thickness in ultrathin BiFeO3 films is investigated using phase-field simulations. The findings reveal a notable increase in ferroelectric polarization with increasing thickness, with a particularly discernible change occurring below the 10 nm threshold. Upon accounting for surface effects, the polarization is marginally lower than the case without such considerations, with the disparity becoming more pronounced at smaller thicknesses. Moreover, the hysteresis loop and butterfly loop of the ultrathin film were simulated, demonstrating that the ferroelectric properties of films remain robust even down to a thickness of 5 nm. Our investigations provide valuable insights into the significance of ferroelectric thin films in device miniaturization.
Collapse
|
3
|
Soft Carbon as Cathode with High Rate Performance for Dual-Ion Batteries via Fast PF 6 - Intercalation Improved by Surface Effect. CHEMSUSCHEM 2023; 16:e202300493. [PMID: 37158778 DOI: 10.1002/cssc.202300493] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/06/2023] [Revised: 05/03/2023] [Accepted: 05/08/2023] [Indexed: 05/10/2023]
Abstract
Dual-ion battery is a new type of battery in which both anions and cations participate in the energy storage process. However, this unique battery configuration imposes high requirements on the cathode, which typically presents a poor rate performance due to the sluggish diffusion dynamics and intercalation reaction kinetics of anions. Herein, we report petroleum coke-based soft carbon as the cathode for dual-ion batteries, exhibiting a superior rate performance with a specific capacity of 96 mAh g-1 at a rate of 2 C and 72 mAh g-1 remained even at 50 C. In situ XRD and Raman demonstrate that the anions can directly form lower-stage graphite intercalation compounds during the charge process owing to the surface effect, skipping the long evolutionary process from higher to lower stage, thus significantly improving the rate performance. This study highlights the impact of the surface effect and provides a promising perspective for dual-ion batteries.
Collapse
|
4
|
Characterization and biofouling potential analysis of two cyanobacterial strains isolated from Cape Verde and Morocco. FEMS Microbiol Ecol 2023; 99:6986251. [PMID: 36633537 DOI: 10.1093/femsec/fiad004] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/21/2022] [Revised: 11/03/2022] [Accepted: 01/05/2023] [Indexed: 01/13/2023] Open
Abstract
Cyanobacteria are new sources of value-added compounds but also ubiquitous and harmful microfoulers on marine biofouling. In this work, the isolation and identification of two cyanobacterial strains isolated from Cape Verde and Morocco, as well as their biofilm-forming ability on glass and Perspex under controlled hydrodynamic conditions, were performed. Phylogenetic analysis revealed that cyanobacterial strains isolated belong to Leptothoe and Jaaginema genera (Leptothoe sp. LEGE 181153 and Jaaginema sp. LEGE 191154). From quantitative and qualitative data of wet weight, chlorophyll a content and biofilm thickness obtained by optical coherence tomography, no significant differences were found in biofilms developed by the same cyanobacterial strain on different surfaces (glass and Perspex). However, the biofilm-forming potential of Leptothoe sp. LEGE 181153 proved to be higher compared with Jaaginema sp. LEGE 191154, particularly at the maturation stage of biofilm development. Three-dimensional biofilm images obtained from confocal laser scanning microscopy showed different patterns between both cyanobacterial strains and also among the two surfaces. Because standard methodologies to evaluate cyanobacterial biofilm formation, as well as two different optical imaging techniques, were used, this work also highlights the possibility of integrating different techniques to evaluate a complex phenomenon like cyanobacterial biofilm development.
Collapse
|
5
|
Shear Horizontal Surface Waves in a Layered Piezoelectric Nanostructure with Surface Effects. MICROMACHINES 2022; 13:1711. [PMID: 36296063 PMCID: PMC9611477 DOI: 10.3390/mi13101711] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 09/24/2022] [Revised: 10/07/2022] [Accepted: 10/08/2022] [Indexed: 06/16/2023]
Abstract
This work aims to provide a fundamental understanding on the dispersive behaviors of shear horizontal (SH) surface waves propagating in a layered piezoelectric nanostructure consisting of an elastic substrate and a piezoelectric nanofilm by considering the surface effects. Theoretical derivation based on the surface piezoelectricity model was conducted for this purpose, and analytic expressions of the dispersion equation under the nonclassical mechanical and electrical boundary conditions were obtained. Numerical solutions were given to investigate the influencing mechanism of surface elasticity, surface piezoelectricity, surface dielectricity, as well as the surface density upon the propagation characteristics of SH surface waves, respectively. The results also reveal the size-dependence of dispersive behaviors, which indicates that the surface effects make a difference only when the thickness of the piezoelectric nanofilm stays in a certain range.
Collapse
|
6
|
Effects on the Titanium Implant Surface by Different Hygiene Instrumentations: A Narrative Review. Cureus 2022; 14:e30884. [PMID: 36465763 PMCID: PMC9708459 DOI: 10.7759/cureus.30884] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 10/28/2022] [Indexed: 01/25/2023] Open
Abstract
Peri-implant disease is usually caused by the accumulation of dental biofilm around the implant, and this biofilm can irradiate the gingiva tissue, which leads to inflammation and, more severely, to a deterioration of the bone structure. There is a concern regarding the removal of biofilm from the implant surface by using different hygiene instruments. Some hygiene instruments may have some effect on the dental implant surface, resulting in roughening or damage to the implant surfaces. This study reviewed the effects of titanium implant surfaces on different hygiene instruments. A literature search was conducted from PubMed, ScienceDirect, and Scopus databases for articles published from 1992 to 2021. A total of 19 full-text papers with keywords of interest that met all the eligibility criteria were selected. Surface roughness was evaluated with a scanning electron microscope and also using a profilometer, laser scanning, scanning probe, and atomic force microscopes. A metal curette produced a roughened surface on the titanium implant, but a plastic curette did not alter the surface. Instrumentation with rubber cups left the surface unchanged and appeared to smoothen the surface, whereas the air-powder abrasive instrumentation altered the surface with the presence of micro pits and pores. A conventional metal ultrasonic scaler showed significant surface topographical changes and scratches on both titanium surfaces, as a diode laser, light-emitting diode (LED), and laser treatment did not show any alteration on the rough and smooth titanium surfaces. Thus, a non-metallic instrument such as a plastic curette, rubber cups, and novel technology including diode laser, LED, and laser treatment is appropriate and can be used for debridement on smooth and machined titanium implant surfaces as well as sandblasted and acid-etched (SLA), titanium plasma-sprayed (TPS), and resorbable blasted media (RBM) surfaces. The use of metallic instruments should be avoided, and it is not recommended.
Collapse
|
7
|
Nonsingular Stress Distribution of Edge Dislocations near Zero-Traction Boundary. MATERIALS 2022; 15:ma15144929. [PMID: 35888395 PMCID: PMC9323671 DOI: 10.3390/ma15144929] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 06/27/2022] [Revised: 07/11/2022] [Accepted: 07/12/2022] [Indexed: 11/30/2022]
Abstract
Among many types of defects present in crystalline materials, dislocations are the most influential in determining the deformation process and various physical properties of the materials. However, the mathematical description of the elastic field generated around dislocations is challenging because of various theoretical difficulties, such as physically irrelevant singularities near the dislocation-core and nontrivial modulation in the spatial distribution near the material interface. As a theoretical solution to this problem, in the present study, we develop an explicit formulation for the nonsingular stress field generated by an edge dislocation near the zero-traction surface of an elastic medium. The obtained stress field is free from nonphysical divergence near the dislocation-core, as compared to classical solutions. Because of the nonsingular property, our results allow the accurate estimation of the effect of the zero-traction surface on the near-surface stress distribution, as well as its dependence on the orientation of the Burgers vector. Finally, the degree of surface-induced modulation in the stress field is evaluated using the concept of the L2-norm for function spaces and the comparison with the stress field in an infinitely large system without any surface.
Collapse
|
8
|
Analytic formulation of elastic field around edge dislocation adjacent to slanted free surface. ROYAL SOCIETY OPEN SCIENCE 2022; 9:220151. [PMID: 35706675 PMCID: PMC9174701 DOI: 10.1098/rsos.220151] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 02/07/2022] [Accepted: 05/16/2022] [Indexed: 06/15/2023]
Abstract
Explicit and tractable formulation of the internal stress field around edge dislocations is indispensable for considering the mechanics of fine crystalline solids, because the motion of edge dislocations in a slanted direction with respect to the free surface often plays a vital role in the plastic deformation of the solids under loading. In this study, we formulated an analytical solution for the stress distribution that occurs around edge dislocations embedded in a semi-infinite elastic medium. This formulation is based on the image force method and the Airy stress function method; it describes the variation in the stress distribution with changes in the slanted angle between the traction-free flat surface of the medium and the Burgers vector of the edge dislocation. Furthermore, our analytical solution shows that the attractive force acting on the edge dislocation due to the presence of the free surface is always perpendicular to the surface, regardless of the relative angle of the Burgers vector with the surface.
Collapse
|
9
|
Photoluminescence of Fully Inorganic Colloidal Gold Nanocluster and Their Manipulation Using Surface Charge Effects. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2021; 33:e2101549. [PMID: 34165866 DOI: 10.1002/adma.202101549] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/24/2021] [Revised: 04/08/2021] [Indexed: 06/13/2023]
Abstract
Fully inorganic, colloidal gold nanoclusters (NCs) constitute a new class of nanomaterials that are clearly distinguishable from their commonly studied metal-organic ligand-capped counterparts. As their synthesis by chemical methods is challenging, details about their optical properties remain widely unknown. In this work, laser fragmentation in liquids is performed to produce fully inorganic and size-controlled colloidal gold NCs with monomodal particle size distributions and an fcc-like structure. Results reveal that these NCs exhibit highly pronounced photoluminescence with quantum yields of 2%. The emission behavior of small (2-2.5 nm) and ultrasmall (<1 nm) NCs is significantly different and dominated by either core- or surface-based emission states. It is further verified that emission intensities are a function of the surface charge density, which is easily controllable by the pH of the surrounding medium. This experimentally observed correlation between surface charge and photoluminescence emission intensity is confirmed by density functional theoretical simulations, demonstrating that fully inorganic NCs provide an appropriate material to bridge the gap between experimental and computational studies of NCs. The presented study deepens the understanding of electronic structures in fully inorganic colloidal gold NCs and how to systematically tune their optical properties via surface charge density and particle size.
Collapse
|
10
|
Effect of Nanopores on Mechanical Properties of the Shape Memory Alloy. MICROMACHINES 2021; 12:mi12050529. [PMID: 34067037 PMCID: PMC8151688 DOI: 10.3390/mi12050529] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/08/2021] [Revised: 04/21/2021] [Accepted: 04/24/2021] [Indexed: 11/23/2022]
Abstract
Nanoporous Shape Memory Alloys (SMA) are widely used in aerospace, military industry, medical and health and other fields. More and more attention has been paid to its mechanical properties. In particular, when the size of the pores is reduced to the nanometer level, the effect of the surface effect of the nanoporous material on the mechanical properties of the SMA will increase sharply, and the residual strain of the SMA material will change with the nanoporosity. In this work, the expression of Young’s modulus of nanopore SMA considering surface effects is first derived, which is a function of nanoporosity and nanopore size. Based on the obtained Young’s modulus, a constitutive model of nanoporous SMA considering residual strain is established. Then, the stress–strain curve of dense SMA based on the new constitutive model is drawn by numerical method. The results are in good agreement with the simulation results in the published literature. Finally, the stress-strain curves of SMA with different nanoporosities are drawn, and it is concluded that the Young’s modulus and strength limit decrease with the increase of nanoporosity.
Collapse
|
11
|
Neutron and X-ray Diffraction Analysis of Macro and Phase-Specific Micro Residual Stresses in Deep Rolled Duplex Stainless Steels. MATERIALS 2021; 14:ma14081854. [PMID: 33917981 PMCID: PMC8068393 DOI: 10.3390/ma14081854] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/05/2021] [Revised: 03/30/2021] [Accepted: 03/31/2021] [Indexed: 11/29/2022]
Abstract
Experimental analyses of depth distributions of phase-specific residual stresses after deep rolling were carried out by means of laboratory X-ray diffraction and neutron diffraction for the two duplex steels X2CrNiMoN22-5-3 and X3CrNiMoN27-5-2, which differ significantly in their ferrite to austenite ratios. The aim of the investigation was to elucidate to which extent comparable results can be achieved with the destructive and the non-destructive approach and how the process induced phase-specific micro residual stresses influence the determination of the phase- and {hkl}-specific reference value d0, required for evaluation of neutron strain scanning experiments. A further focus of the work was the applicability of correction approaches that were developed originally for single-phase materials for accounting for spurious strains during through surface neutron scanning experiments on coarse two-phase materials. The depth distributions of macro residual stresses were separated from the phase-specific micro residual stresses. In this regard, complementary residual stress analysis was carried out by means of incremental hole drilling. The results indicate that meaningful macro residual stress depth distributions can be determined non-destructively by means of neutron diffraction for depths starting at about 150–200 µm. Furthermore, it was shown that the correction of the instrumental surface effects, which are intrinsic for surface neutron strain scanning, through neutron ray-tracing simulation is applicable to multiphase materials and yields reliable results. However, phase-specific micro residual stresses determined by means of neutron diffraction show significant deviations to data determined by means of lab X-ray stress analysis according to the well-known sin2ψ-method.
Collapse
|
12
|
Unique Behavior of Poly(propylene glycols) Confined within Alumina Templates Having a Nanostructured Interface. NANO LETTERS 2020; 20:5714-5719. [PMID: 32559092 PMCID: PMC7588129 DOI: 10.1021/acs.nanolett.0c01116] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 03/12/2020] [Revised: 06/18/2020] [Indexed: 06/11/2023]
Abstract
Herein we show that the nanostructured interface obtained via modulation of the pore size has a strong impact on the segmental and chain dynamics of two poly(propylene glycol) (PPG) derivatives with various molecular weights (Mn = 4000 g/mol and Mn = 2000 g/mol). In fact, a significant acceleration of the dynamics was observed for PPG infiltrated into ordinary alumina templates (Dp = 36 nm), while bulklike behavior was found for samples incorporated into membranes of modulated diameter (19 nm < Dp < 28 nm). We demostrated that the modulation-induced roughness reduces surface interactions of polymer chains near the interface with respect to the ones adsorbed to the ordinary nanochannels. Interestingly, this effect is noted despite the enhanced wettability of PPG in the latter system. Consequently, as a result of weaker H-bonding surface interactions, the conformation of segments seems to locally mimic the bulk arrangement, leading to bulklike dynamics, highlighting the crucial impact of the interface on the overall behavior of confined materials.
Collapse
|
13
|
Swarming Motility Without Flagellar Motor Switching by Reversal of Swimming Direction in E. coli. Front Microbiol 2020; 11:1042. [PMID: 32670212 PMCID: PMC7326100 DOI: 10.3389/fmicb.2020.01042] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/21/2019] [Accepted: 04/27/2020] [Indexed: 01/08/2023] Open
Abstract
In a crowded environment such as a bacterial swarm, cells frequently got jammed and came to a stop, but were able to escape the traps by backing up in their moving course with a head-to-tail change (a reversal). Reversals are essential for the expansion of a bacterial swarm. Reversal for a wildtype cell usually involved polymorphic transformation of the flagellar filaments induced by directional switching of the flagellar motors. Here we discovered a new way of reversal in cells without motor switching and characterized its mechanisms. We further found that this type of reversal was not limited to swarmer cells, but also occurred for cells grown in a bulk solution. Therefore, reversal was a general way of escaping when cells got jammed in their natural complex habitats. The new way of reversal we discovered here offered a general strategy for cells to escape traps and explore their environment.
Collapse
|
14
|
Engineering the Structure of Mesoporous Bioactive Glass Microspheres by the Surface Effect of Inverse Opal Templates and Temperature. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2019; 15:e1905451. [PMID: 31788948 DOI: 10.1002/smll.201905451] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/23/2019] [Revised: 11/06/2019] [Indexed: 06/10/2023]
Abstract
The interactions of ions and molecules with material surface are highly dependent on the surface properties of the material. Therefore, the distribution of ions or molecules near the material surface may be affected by the surface properties. This phenomenon can be significant enough for controlling the structure of a material synthesized in the sub-micrometer scale confinement space of a template. This work confirms that inverse opals are perfect templates for offering confinement space, while their different surface properties can strongly affect ion and block copolymer distribution in the confinement space. This surface effect principle can be used for the controlled synthesis of colloids with complex composition. As an example, four kinds of mesoporous magnetic bioactive glass colloids with ordered mesopores, core-shell structure, open surface pores, or disordered mesopores are prepared by using polystyrene and carbon inverse opal templates. This work reveals that inverse opal templates possess great advantage in controlled synthesizing colloidal structures due to their surface effect on ions and molecules and confinement space.
Collapse
|
15
|
Effects of Wilting and Dew on the Water Isotope Composition of Detached Grass in Temperate Grassland. JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY 2019; 67:9460-9467. [PMID: 31381328 DOI: 10.1021/acs.jafc.9b02978] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Understanding the water isotopes in feed products derived from grass is fundamental for tracing domestic animal products. Grass silage water was reported to have fewer heavy isotopes than fresh grass, but it is still unknown whether dew formation (either dewfall or dewrise), exchange with soil water, or other processes override the expected enrichment of heavy isotopes due to wilting. The isotopic variations of water (δ2H, δ18O) in fresh grass and cut grass during wilting on soil and on plastic were compared in this study. Drying enriched heavier isotopes, but this was overridden by three processes that finally caused low δ2H and δ18O values: (i) the adsorption of humidity from the surroundings, (ii) the exchange with humidity, and (iii) the depletion of heavy water isotopes close to organic surfaces, called the surface effect, which was the most dominant effect at the end of drying when the water content became low.
Collapse
|
16
|
Surface Effect on 2D Hybrid Perovskite Crystals: Perovskites Using an Ethanolamine Organic Layer as an Example. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2018; 30:e1804372. [PMID: 30276878 DOI: 10.1002/adma.201804372] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/10/2018] [Revised: 08/15/2018] [Indexed: 06/08/2023]
Abstract
Despite the remarkable progress of optoelectronic devices based on hybrid perovskites, there are significant drawbacks, which have largely hindered their development as an alternative of silicon. For instance, hybrid perovskites are well-known to suffer from moisture instability which leads to surface degradation. Nonetheless, the dependence of the surface effect on the moisture stability and optoelectronic properties of hybrid perovskites has not been fully investigated. In this work, the influence of the surface effect of 2D layered perovskites before and after mechanical exfoliation, representing rough and smooth surfaces of perovskite crystals, are studied. It is found that the smooth 2D perovskite is less sensitive to ambient moisture and exhibits a considerably low dark current, which outperforms the rough perovskites by 23.6 times in terms of photodetectivity. The superior moisture stability of the smooth perovskites over the rough perovskites is demonstrated. Additionally, ethanolamine is employed as an organic linker of the 2D layered perovskite, which further improves the moisture stability. This work reveals the strong dependence of the surface conditions of 2D hybrid perovskite crystals on their moisture stability and optoelectronic properties, which are of utmost importance to the design of practical optoelectronic devices based on hybrid perovskite crystals.
Collapse
|
17
|
Giant Ferroelectric Polarization in Ultrathin Ferroelectrics via Boundary-Condition Engineering. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2017; 29:1701475. [PMID: 28585347 DOI: 10.1002/adma.201701475] [Citation(s) in RCA: 25] [Impact Index Per Article: 3.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/15/2017] [Revised: 04/20/2017] [Indexed: 06/07/2023]
Abstract
Tailoring and enhancing the functional properties of materials at reduced dimension is critical for continuous advancement of modern electronic devices. Here, the discovery of local surface induced giant spontaneous polarization in ultrathin BiFeO3 ferroelectric films is reported. Using aberration-corrected scanning transmission electron microscopy, it is found that the spontaneous polarization in a 2 nm-thick ultrathin BiFeO3 film is abnormally increased up to ≈90-100 µC cm-2 in the out-of-plane direction and a peculiar rumpled nanodomain structure with very large variation in c/a ratios, which is analogous to morphotropic phase boundaries (MPBs), is formed. By a combination of density functional theory and phase-field calculations, it is shown that it is the unique single atomic Bi2 O3-x layer at the surface that leads to the enhanced polarization and appearance of the MPB-like nanodomain structure. This finding clearly demonstrates a novel route to the enhanced functional properties in the material system with reduced dimension via engineering the surface boundary conditions.
Collapse
|
18
|
Impacts of Cross-Linkers on Biological Effects of Mesoporous Silica Nanoparticles. ACS APPLIED MATERIALS & INTERFACES 2017; 9:10254-10265. [PMID: 28229590 DOI: 10.1021/acsami.7b00240] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/06/2023]
Abstract
Chemically synthesized cross-linkers play decisive roles in variable cargos attached to nanoparticles (NPs). Previous studies reported that surface properties, such as the size, charge, and surface chemistry, are particularly important determinants influencing the biological fate and actions of NPs and cells. Recent studies also focused on the relationship of serum proteins with the surface properties of NPs (also called the protein corona), which is recognized as a key factor in determining the cytotoxicity and biodistribution. However, there is concern that cross-linkers conjugated onto NPs might induce undesirable biological effects. Cell responses induced by cross-linkers have not yet been precisely elucidated. Herein, using mesoporous silica nanoparticles (MSNs) the surfaces of which were separately conjugated with four popular heterobifunctional cross-linkers, i.e., N-[α-maleimidoacetoxy]succinimide ester (AMAS), m-maleimidobenzoyl-N-hydroxysuccinimide ester (MBS), succinimidyl 4-(N-maleimidomethyl)cyclohexane-1-carboxylate (SMCC), and maleimide poly(ethylene glycol) succinimidyl carboxymethyl ester (MAL-PEG-SCM), we investigated cross-linker-conjugated MSNs to determine whether they can cause cytotoxicity, or enhance reactive oxygen species (ROS) generation, nuclear factor (NF)-κB activation, and p-p38 or p21 protein expressions in RAW264.7 macrophage cells. Furthermore, we also separately conjugated two biomolecules containing TAT peptides and bovine serum albumin (BSA) as model systems to study their cell responses in detail. Finally, in vivo mice studies evaluated the biodistribution and blood assays (biochemistry and complete blood count) of PEG-derivative NPs, and results suggested that TAT peptides caused significant white blood cell (WBC)-related cell and platelet abnormalities, as well as liver and kidney dysfunction compared to BSA when conjugated onto MSNs. The results showed that attention to cross-linkers should be considered an issue in the surface modification of NPs. We anticipate that our results could be helpful in developing biosafety nanomaterials.
Collapse
|
19
|
Decomposition of gaseous toluene using a continuous flow discharge plasma reactor with new configurations. ENVIRONMENTAL TECHNOLOGY 2015; 36:3084-3093. [PMID: 26077374 DOI: 10.1080/09593330.2015.1053994] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/18/2014] [Accepted: 05/12/2015] [Indexed: 06/04/2023]
Abstract
The destruction of gaseous toluene was carried out in a tubular multilayer dielectric barrier discharge reactor which can yield a steady state of low-temperature plasma with an array structure. The research was investigated under different relative humidities, input voltages, energy densities, energy consumption and the reactor processing capacities. The results showed that the highest removal efficiency and processing capacity (γ) were acquired using an additional dielectric with the width of 2 mm between adjacent discharge quartz tubes, and the removal efficiency of toluene reached 86.5% and γ increased to 6272 kg/s m³ at a voltage of 6 kV. The gas-phase by-products (O3, NOx, COx and intermediate organics) were also presented and the reaction mechanism was described according to the decomposition reaction tunnels.
Collapse
|
20
|
Long minority carrier diffusion lengths in bridged silicon nanowires. NANO LETTERS 2015; 15:523-529. [PMID: 25541642 DOI: 10.1021/nl503870u] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/04/2023]
Abstract
Nanowires have large surface areas that create new challenges for their optoelectronic applications. Lithographic processes involved in device fabrication and substrate interfaces can lead to surface defects and substantially reduce charge carrier lifetimes and diffusion lengths. Here, we show that using a bridging method to suspend pristine nanowires allows for circumventing detrimental fabrication steps and interfacial effects associated with planar device architectures. We report electron diffusion lengths up to 2.7 μm in bridged silicon nanowire devices, much longer than previously reported values for silicon nanowires with a diameter of 100 nm. Strikingly, electron diffusion lengths are reduced to only 45 nm in planar devices incorporating nanowires grown under the same conditions. The highly scalable silicon nanobridge devices with the demonstrated long diffusion lengths may find exciting applications in photovoltaics, sensing, and photodetectors.
Collapse
|
21
|
Terahertz Wave Propagation in a Nanotube Conveying Fluid Taking into Account Surface Effect. MATERIALS 2013; 6:2393-2399. [PMID: 28809279 PMCID: PMC5458953 DOI: 10.3390/ma6062393] [Citation(s) in RCA: 22] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/02/2013] [Revised: 06/03/2013] [Accepted: 06/03/2013] [Indexed: 11/16/2022]
Abstract
In nanoscale structure sizes, the surface-to-bulk energy ratio is high and the surface effects must be taken into account. Surface effect plays a key role in accurately predicting the vibration behavior of nanostructures. In this paper, the wave behaviors of a single-walled carbon nanotube (CNT) conveying fluid are studied. The nonlocal Timoshenko beam theory is used and the surface effect is taken into account. It is found that the fluid can flow at a very high flow velocity and the wave propagates in the terahertz frequency range. The surface effects can significantly enhance the propagating frequency. This finding is different from the classical model where the surface effect is neglected.
Collapse
|