1
|
Facile Solvent-Free Fabrication of All-Small-Molecule Supramolecular Photothermal Bioadhesive for Sutureless Wound Closure. ACS Biomater Sci Eng 2024. [PMID: 38741453 DOI: 10.1021/acsbiomaterials.4c00296] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 05/16/2024]
Abstract
Achieving underwater adhesion possesses a significant challenge, primarily due to the presence of interfacial water, which restricts the potential applications of adhesives. In this study, we present a straightforward and environmentally friendly one-pot approach for synthesizing a solvent-free supramolecular TPFe bioadhesive composed of thioctic acid, proanthocyanidins, and FeCl3. The bioadhesive exhibits excellent biocompatibility and photothermal antibacterial properties and demonstrates effective adhesion on various substrates in both wet and dry environments. Importantly, the adhesive strength of this bioadhesive on steel exceeds 1.2 MPa and that on porcine skin exceeds 100 kPa, which is greater than the adhesive strength of most reported bioadhesives. In addition, the bioadhesive exhibits the ability to effectively halt bleeding, close wounds promptly, and promote wound healing in the rat skin wound model. Therefore, the TPFe bioadhesive has potential as a medical bioadhesive for halting bleeding quickly and promoting wound healing in the biomedical field. This study provides a new idea for the development of bioadhesives with firm wet adhesion.
Collapse
|
2
|
pH-Tolerant Wet Adhesion of Catechol Analogs. ACS APPLIED MATERIALS & INTERFACES 2024; 16:22689-22695. [PMID: 38622496 PMCID: PMC11071048 DOI: 10.1021/acsami.4c01740] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/30/2024] [Revised: 04/03/2024] [Accepted: 04/04/2024] [Indexed: 04/17/2024]
Abstract
The need for improved wet adhesives has driven research on mussel-inspired materials incorporating dihydroxyphenylalanine (DOPA) and related analogs of the parent catechol, but their susceptibility to oxidation limits practical application of these functionalities. Here, we investigate the molecular-level adhesion of the catechol analogs dihydroxybenzamide (DHB) and hydroxypyridinone (HOPO) as a function of pH. We find that the molecular structure of the catechol analogs influences their susceptibility to oxidation in alkaline conditions, with HOPO emerging as a particularly promising candidate for pH-tolerant adhesives for diverse environmental conditions.
Collapse
|
3
|
A Single-Component Janus Zwitterionic Hydrogel Patch with a Bionic Microstructure for Postoperative Adhesion Prevention. ACS APPLIED MATERIALS & INTERFACES 2024. [PMID: 38669466 DOI: 10.1021/acsami.4c01845] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 04/28/2024]
Abstract
The development of anti-adhesion hydrogels for preventing postoperative adhesions is an ongoing challenge, particularly in achieving a balance between exceptional antifouling properties and effective in situ tissue retention. In this study, we propose a unique approach with the design of a single-component Janus zwitterionic hydrogel patch featuring a bionic microstructure. The Janus patches were prepared through free radical polymerization of sulfobetaine methacrylate with N, N'-methylenebis(2-propenamide) as the cross-linker. The incorporation of hexagonal facets separated by interconnecting grooves on one side imparts durable and reliable in situ retention capabilities to the Janus hydrogel patch when it is applied to traumatized tissues. The opposing flat surface exhibits outstanding resistance to bacteria, proteins, and cell adhesion, due to the superhydrophilicity and excellent antifouling characteristics of zwitterionic polymers. This dual functionality empowers the Janus hydrogel patch to mitigate adhesions between traumatized and surrounding tissues. The hexagonal and groove bionic microstructures facilitate rapid drainage, promoting swift contact with the tissue for increased adhesion strength, while independent hexagonal microfacets enhance the peeling energy. In an in vivo setting, Janus zwitterionic hydrogel patches with surface microstructures form mutually embedded structures with the cecum surface, minimizing the likelihood of slippage and detachment. Remarkably, in vivo experiments involving abdominal wall cecum injuries illustrate the Janus zwitterionic hydrogel patch's superior anti-adhesion effectiveness compared to commercial controls. Thus, the Janus hydrogel patch, distinguished by its bionic microstructure surface, presents substantial potential in the biomedical field for averting postoperative adhesions.
Collapse
|
4
|
Swift Covalent Gelation Coupled with Robust Wet Adhesive Powder: A Novel Approach for Acute Massive Hemorrhage Control in Dynamic and High-Pressure Wound Environments. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024:e2311859. [PMID: 38643382 DOI: 10.1002/smll.202311859] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/19/2023] [Revised: 03/05/2024] [Indexed: 04/22/2024]
Abstract
The quest for efficient hemostatic agents in emergency medicine is critical, particularly for managing massive hemorrhages in dynamic and high-pressure wound environments. Traditional self-gelling powders, while beneficial due to their ease of application and rapid action, fall short in such challenging conditions. To bridge this gap, the research introduces a novel self-gelling powder that combines ultrafast covalent gelation and robust wet adhesion, presenting a significant advancement in acute hemorrhage control. This ternary system comprises ε-polylysine (ε-PLL) and 4-arm polyethylene glycol succinyl succinate (4-arm-PEG-NHS) forming the hydrogel framework. Na2HPO4 functions as the "H+ sucker" to expedite the amidation reaction, slashing gelation time to under 10 s, crucial for immediate blood loss restriction. Moreover, PEG chains' hydrophilicity facilitates efficient absorption of interfacial blood, increasing the generated hydrogel's cross-linking density and strengthens its tissue bonding, thereby resulting in excellent mechanical and wet adhesion properties. In vitro experiments reveal the optimized formulation's exceptional tissue compliance, procoagulant activity, biocompatibility and antibacterial efficacy. In porcine models of heart injuries and arterial punctures, it outperforms commercial hemostatic agent Celox, confirming its rapid and effective hemostasis. Conclusively, this study presents a transformative approach to hemostasis, offering a reliable and potent solution for the emergency management of massive hemorrhage.
Collapse
|
5
|
A Nature-Derived, Hetero-Structured, Pro-Healing Bioadhesive Patch for High-Performance Sealing of Wet Tissues. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2024:e2309774. [PMID: 38490747 DOI: 10.1002/adma.202309774] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/20/2023] [Revised: 02/24/2024] [Indexed: 03/17/2024]
Abstract
Tissue adhesives are promising alternatives to sutures and staples to achieve wound closure and hemostasis. However, they often do not work well on tissues that are soaked in blood or other biological fluids, and organs that are typically exposed to a variety of harsh environments, such as different pH values, nonhomogeneous distortions, continuous expansions and contractions, or high pressures. In this study, we developed a nature-derived multilayered hetero-bioadhesive patch (skin secretion of Andrias davidianus (SSAD)-Patch) based on hydrophilic/hydrophobic pro-healing bioadhesives derived from the skin secretion of SSAD, which is designed to form pressure-triggered strong adhesion with wet tissues. The SSAD-Patch is successfully applied for the sealing and healing of tissue defects within 10 s in diverse extreme injury scenarios in vivo, including rat stomach perforation, small intestine perforation, fetal membrane defect, porcine carotid artery incision, and lung lobe laceration. Our findings reveal a promising new type of self-adhesive regenerative SSAD-Patch, which is potentially adaptable to broad applications (under different pH values and air or liquid pressures) in sutureless wound sealing and healing. This article is protected by copyright. All rights reserved.
Collapse
|
6
|
Cohering Plasma into Adhesive Gel by Natural Biopolymer-Nanoparticle Hybrid Powder for Efficient Hemostasis and Wound Healing. ACS APPLIED MATERIALS & INTERFACES 2024; 16:11263-11274. [PMID: 38404067 DOI: 10.1021/acsami.3c17199] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/27/2024]
Abstract
Hemostatic powder is commonly used in emergency bleeding control due to its suitability for irregularly shaped wounds, ease of use, and stable storage. However, traditional powder often has limited tissue adhesion and weak thrombus support, which makes it vulnerable to displacement by blood flow. Herein, we have developed a tricomponent hemostatic powder (MQS) composed of mesoporous bioactive glass nanoparticle (MBG), positively charged quaternized chitosan (QCS), and negatively charged catechol-modified alginate (SADA). Upon application to the wound, MBG with its high specific surface area quickly absorbs plasma, concentrating the blood coagulation factor. Simultaneously, the water-soluble QCS and SADA interact with each other and form a net, which can be further cross-linked by MBG. This network efficiently binds and entraps clustered blood coagulation factors, ultimately resulting in the formation of a durable and robust thrombus. Furthermore, the formed net adheres to the injury site, offering protection against thrombus disruption caused by the bloodstream. Benefiting from the synergistic effect of these three components, MQS demonstrates superior hemostatic performance compared to commercial hemostatic powders like Celox in both arterial injuries and noncompressible liver puncture wounds. Furthermore, MQS can effectively accelerate wound healing. In addition, MQS exhibits excellent antibacterial activity, cytocompatibility, and hemocompatibility. These advantages of MQS, including strong blood clotting, wet tissue adherence, antibacterial activity, wound healing ability, biosafety, ease of use, and stable storage, make it a promising hemostatic agent for emergency situations.
Collapse
|
7
|
Nature-Inspired Wet Drug Delivery Platforms. SMALL METHODS 2024:e2301726. [PMID: 38284322 DOI: 10.1002/smtd.202301726] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/12/2023] [Revised: 01/11/2024] [Indexed: 01/30/2024]
Abstract
Nature has created various organisms with unique chemical components and multi-scale structures (e.g., foot proteins, toe pads, suckers, setose gill lamellae) to achieve wet adhesion functions to adapt to their complex living environments. These organisms can provide inspirations for designing wet adhesives with mediated drug release behaviors in target locations of biological surfaces. They exhibit conformal and enhanced wet adhesion, addressing the bottleneck of weaker tissue interface adhesion in the presence of body fluids. Herein, it is focused on the research progress of different wet adhesion and bioinspired fabrications, including adhesive protein-based adhesion and inspired adhesives (e.g., mussel adhesion); capillarity and Stefan adhesion and inspired adhesive surfaces (e.g., tree frog adhesion); suction-based adhesion and inspired suckers (e.g., octopus' adhesion); interlocking and friction-based adhesion and potential inspirations (e.g., mayfly larva and teleost adhesion). Other secreted protein-induced wet adhesion is also reviewed and various suckers for other organisms and their inspirations. Notably, one representative application scenario of these bioinspired wet adhesives is highlighted, where they function as efficient drug delivery platforms on target tissues and/or organs with requirements of both controllable wet adhesion and optimized drug release. Finally, the challenges of these bioinspired wet drug delivery platforms in the future is presented.
Collapse
|
8
|
A Self-Assembly Pro-Coagulant Powder Capable of Rapid Gelling Transformation and Wet Adhesion for the Efficient Control of Non-Compressible Hemorrhage. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2024; 11:e2306289. [PMID: 38044313 PMCID: PMC10811489 DOI: 10.1002/advs.202306289] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/01/2023] [Revised: 11/10/2023] [Indexed: 12/05/2023]
Abstract
Rapid and effective control of non-compressible massive hemorrhage poses a great challenge in first-aid and clinical settings. Herein, a biopolymer-based powder is developed for the control of non-compressible hemorrhage. The powder is designed to facilitate rapid hemostasis by its excellent hydrophilicity, great specific surface area, and adaptability to the shape of wound, enabling it to rapidly absorb fluid from the wound. Specifically, the powder can undergo sequential cross-linking based on "click" chemistry and Schiff base reaction upon contact with the blood, leading to rapid self-gelling. It also exhibits robust tissue adhesion through covalent/non-covalent interactions with the tissues (adhesive strength: 89.57 ± 6.62 KPa, which is 3.75 times that of fibrin glue). Collectively, this material leverages the fortes of powder and hydrogel. Experiments with animal models for severe bleeding have shown that it can reduce the blood loss by 48.9%. Studies on the hemostatic mechanism also revealed that, apart from its physical sealing effect, the powder can enhance blood cell adhesion, capture fibrinogen, and synergistically induce the formation of fibrin networks. Taken together, this hemostatic powder has the advantages for convenient preparation, sprayable use, and reliable hemostatic effect, conferring it with a great potential for the control of non-compressible hemorrhage.
Collapse
|
9
|
Wet-Adaptive Electronic Skin. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023; 35:e2305630. [PMID: 37566544 DOI: 10.1002/adma.202305630] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/12/2023] [Revised: 08/07/2023] [Indexed: 08/13/2023]
Abstract
Skin electronics provides remarkable opportunities for non-invasive and long-term monitoring of a wide variety of biophysical and physiological signals that are closely related to health, medicine, and human-machine interactions. Nevertheless, conventional skin electronics fabricated on elastic thin films are difficult to adapt to the wet microenvironments of the skin: Elastic thin films are non-permeable, which block the skin perspiration; Elastic thin films are difficult to adhere to wet skin; Most skin electronics are difficult to work underwater. Here, a Wet-Adaptive Electronic Skin (WADE-skin) is reported, which consists of a next-to-skin wet-adhesive fibrous layer, a next-to-air waterproof fibrous layer, and a stretchable and permeable liquid metal electrode layer. While the electronic functionality is determined by the electrode design, this WADE-skin simultaneously offers superb stretchability, wet adhesion, permeability, biocompatibility, and waterproof property. The WADE-skin can rapidly adhere to human skin after contact for a few seconds and stably maintain the adhesion over weeks even under wet conditions, without showing any negative effect to the skin health. The use of WADE-skin is demonstrated for the stable recording of electrocardiogram during intensive sweating as well as underwater activities, and as the strain sensor for the underwater operation of virtual reality-mediated human-machine interactions.
Collapse
|
10
|
Bioactive citrate-based polyurethane tissue adhesive for fast sealing and promoted wound healing. Regen Biomater 2023; 11:rbad101. [PMID: 38173771 PMCID: PMC10761209 DOI: 10.1093/rb/rbad101] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/21/2023] [Revised: 10/12/2023] [Accepted: 10/26/2023] [Indexed: 01/05/2024] Open
Abstract
As a superior alternative to sutures, tissue adhesives have been developed significantly in recent years. However, existing tissue adhesives struggle to form fast and stable adhesion between tissue interfaces, bond weakly in wet environments and lack bioactivity. In this study, a degradable and bioactive citrate-based polyurethane adhesive is constructed to achieve rapid and strong tissue adhesion. The hydrophobic layer was created with polycaprolactone to overcome the bonding failure between tissue and adhesion layer in wet environments, which can effectively improve the wet bonding strength. This citrate-based polyurethane adhesive provides rapid, non-invasive, liquid-tight and seamless closure of skin incisions, overcoming the limitations of sutures and commercial tissue adhesives. In addition, it exhibits biocompatibility, biodegradability and hemostatic properties. The degradation product citrate could promote the process of angiogenesis and accelerate wound healing. This study provides a novel approach to the development of a fast-adhering wet tissue adhesive and provides a valuable contribution to the development of polyurethane-based tissue adhesives.
Collapse
|
11
|
Facilely Prepared Thirsty Granules Arouse Tough Wet Adhesion on Overmoist Wounds for Hemostasis and Tissue Repair. ACS APPLIED MATERIALS & INTERFACES 2023; 15:49035-49050. [PMID: 37823272 DOI: 10.1021/acsami.3c11403] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/13/2023]
Abstract
Bioadhesives have been widely used in hemostasis and tissue repair, but the overmoist and wet nature of wound surface (due to the presence of blood and/or wound exudate) has led to poor wet adhesion of bioadhesives, which interrupts the continuous care of wounds. Here, a thirsty polyphenolic silk granule (Tan@SF-pwd-hydro), which absorbs blood and exudate to self-convert to robust bioadhesives (Tan@SF-gel-hydro) in situ, was facilely developed in this study for enhanced wet adhesion toward hemostasis and tissue repair. Tan@SF-pwd-hydro could shield wounds' wetness and immediately convert itself to Tan@SF-gel-hydro to seal wounds for hemorrhage control and wound healing. The maximum adhesiveness of Tan@SF-gel-hydro over wet pigskin was as high as 59.8 ± 2.1 kPa. Tan@SF-pwd-hydro is a promising transformative dressing for hemostasis and tissue repair since its hemostatic time was approximately half of that of the commercial hemostatic product, CeloxTM, and its healing period was much shorter than that of the commercial bioadhesive product, TegadermTM. This pioneering study utilized adverse wetness over wounds to arouse robust adhesiveness by converting thirsty granules to bioadhesives in situ, creatively turning adversity into opportunities. The facile fabrication approach also offers new perspectives for manufacturing sustainability of biomaterials.
Collapse
|
12
|
Adaptive Adhesions of Barnacle-Inspired Adhesive Peptides. ACS Biomater Sci Eng 2023; 9:5679-5686. [PMID: 37722068 DOI: 10.1021/acsbiomaterials.3c01047] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 09/20/2023]
Abstract
The strategy of robust adhesion employed by barnacles renders them fascinating biomimetic candidates for developing novel wet adhesives. Particularly, barnacle cement protein 19k (cp19k) has been speculated to be the key adhesive protein establishing the priming layer in the initial barnacle cement construction. In this work, we systematically studied the sequence design rationale of cp19k by designing adhesive peptides inspired by the low-complexity STGA-rich and the charged segments of cp19k. Combining structure analysis and the adhesion performance test, we found that cp19k-inspired adhesive peptides possess excellent disparate adhesion strategies for both hydrophilic mica and hydrophobic self-assembled monolayer surfaces. Specifically, the low-complexity STGA-rich segment offers great structure flexibility for surface adhesion, while the hydrophobic and charged residues can contribute to the adhesion of the peptides on hydrophobic and charged surfaces. The adaptive adhesion strategy identified in this work broadens our understanding of barnacle adhesion mechanisms and offers valuable insights for designing advanced wet adhesives with exceptional performance on various types of surfaces.
Collapse
|
13
|
Mussel-Inspired Wet-Adhesive Multifunctional Organohydrogel with Extreme Environmental Tolerance for Wearable Strain Sensor. ACS APPLIED MATERIALS & INTERFACES 2023; 15:44342-44353. [PMID: 37668314 DOI: 10.1021/acsami.3c10213] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 09/06/2023]
Abstract
As a flexible artificial material, the conductive hydrogel has broad application prospects in flexible wearable electronics, soft robotics, and biomedical monitoring. However, traditional hydrogels still face many challenges, such as long-term stability, availability in extreme environments, and long-lasting adhesion to the skin surface under sweaty or humid conditions. To circumvent the above issues, one kind of ionic conductive hydrogel was prepared by a simple one-pot method that dissolved chitosan (CS), 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS), tannic acid (TA), and 2-methoxy-ethyl acrylate (MEA) into dimethyl sulfoxide (DMSO)/H2O solvent. The resulting hydrogel showed excellent tensile properties (1440%), extreme environmental tolerance (-40-60 °C), adhesion (72 KPa at porcine skin), ionic conductivity (0.87 S m-1), and high-efficiency antibacterial property. Furthermore, the produced organohydrogel strain sensor exhibited high strain sensitivity (GF = 4.07), excellent signal sensing capabilities (human joint movement, microexpression, and sound signals), and long-term cyclic stability (400 cycles). Looking beyond, this work provides a simple and promising strategy for using hydrogel sensors in extreme environments for e-skin, health monitoring, and wearable electronic devices.
Collapse
|
14
|
A Photocured Bio-based Shape Memory Thermoplastics for Reversible Wet Adhesion. CHEMICAL ENGINEERING JOURNAL (LAUSANNE, SWITZERLAND : 1996) 2023; 470:144226. [PMID: 37484781 PMCID: PMC10361415 DOI: 10.1016/j.cej.2023.144226] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 07/25/2023]
Abstract
Development of reversible wet or underwater adhesives remains a grand challenge. Because weakened intermolecular interactions by water molecules or/and low effective contact area cause poor interface to the wet surfaces, which significantly decreases adhesive strength. Herein, a new photocured, bio-based shape memory polymer (SMP) that shows both chemical and structural wet adhesion to various types of surfaces is developed. The SMP is polymerized from three monomers mainly from bio-sources to form linear polymer chains dangled with hydrophobic side chains. The hydrogen acceptor and donor groups in the chains form hydrogen bonding with the surfaces, which is protected by the hydrophobic chains in the interface. The SMP shows tunable phase transition temperature (Tg) of 17-38 °C. In a rubbery state above Tg, the adhesive forms conformable contact with the targeted surfaces. Below Tg, a transition to a glassy state locks the conformed shapes to largely increase the effective contact area. As a result, the adhesive exhibits long-term underwater adhesion of > 15 days with the best adhesion strength of ~ 0.9 MPa. Its applications in leak repair, underwater on-skin sensors were demonstrated. This new, general strategy would pave avenues to designing bio-based, long-lasting, and reversible adhesives from renewable feedstocks for widespread applications.
Collapse
|
15
|
Mussel Foot Protein Inspired Tape-Type Adhesive with Water-Responsive, High Conformal, Tough, and On-Demand Detachable Adhesion to Wet Tissue. Adv Healthc Mater 2023; 12:e2203342. [PMID: 36912388 DOI: 10.1002/adhm.202203342] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/22/2022] [Revised: 02/23/2023] [Indexed: 03/14/2023]
Abstract
Wet adhesion is highly demanded in noninvasive wound closure, tissue repair, and biomedical devices, but it is still a big challenge for developing biosafe and tough wet bioadhesives due to low or even nonadhesion in the wet state for conventional adhesives. Inspired by the wet-adhesion-contributing factors of mussel foot proteins, a water-responsive dry robust tissue adhesive PAGU tape is made with thickness of <0.5 mm through fast UV-initiated copolymerization of acrylic acid (AA), gelatin (Gel), and hexadecenyl-1,2-catechol (UH). The tape shows strong cohesive mechanical properties and strong interfacial adhesion bonds. Upon application onto wet tissue, the adhesive tape can conform to the tissue, quickly dry tissue surface through absorbing surface/interfacial water and then allows formation of interfacial bonding with a high interfacial toughness of ≈818 J m-2 . Furthermore, it can be readily detached by treating with aq. urea solution. A highly efficient avenue is provided here for producing conformable, tough, and easy detachable wet bioadhesive tapes.
Collapse
|
16
|
Bioinspired Polyacrylic Acid-Based Dressing: Wet Adhesive, Self-Healing, and Multi-Biofunctional Coacervate Hydrogel Accelerates Wound Healing. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2023; 10:e2207352. [PMID: 37060151 DOI: 10.1002/advs.202207352] [Citation(s) in RCA: 7] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/11/2022] [Revised: 02/27/2023] [Indexed: 06/04/2023]
Abstract
Polyacrylic acid (PAA) and its derivatives are commonly used as essential matrices in wound dressings, but their weak wet adhesion restricts the clinical application. To address this issue, a PAA-based coacervate hydrogel with strong wet adhesion capability is fabricated through a facile mixture of PAA copolymers with isoprenyl oxy poly(ethylene glycol) ether and tannic acid (TA). The poly(ethylene glycol) segments on PAA prevent the electrostatic repulsion among the ionized carboxyl groups and absorbed TA to form coacervates. The absorbed TA provides solid adhesion to dry and wet substrates via multifarious interactions, which endows the coacervate with an adhesive strength to skin of 23.4 kPa and 70% adhesion underwater. This coacervate achieves desirable self-healing and extensible properties suitable for frequently moving joints. These investigations prove that the coacervate has strong antibacterial activity, facilitates fibroblast migration, and modulates M1/M2 polarization of macrophages. In vivo hemorrhage experiments further confirm that the coacervate dramatically shortens the hemostatic time from hundreds to tens of seconds. In addition, full-thickness skin defect experiments demonstrate that the coacervate achieves the best therapeutic effect by significantly promoting collagen deposition, angiogenesis, and epithelialization. These results demonstrate that a PAA-based coacervate hydrogel is a promising wound dressing for medical translation.
Collapse
|
17
|
Hybrid Dry Powders for Rapid Sealing of Gastric Perforations under an Endoscope. ACS NANO 2023; 17:9521-9528. [PMID: 37129870 DOI: 10.1021/acsnano.3c02083] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/03/2023]
Abstract
Effective wound sealing is key to prevent postoperative complications arising from gastric endoscopic submucosal dissection (ESD). Accurate delivery of the adhesive to wet and dynamic tissues and rapid action of the adhesive onsite should be considered for endoscopic operation. A hybrid dry powder (HDP) strategy, characterized by decoupling of powder gelation and tissue adhesion, for rapid sealing of wet tissues is presented. HDPs carrying oppositely charged polyelectrolytes become a hydrogel layer over the target tissue by absorbing the surrounding water and forming strong electrostatic interactions between heterogeneous components. Strong adhesion is realized through hydrogen bonding between the adhesive component, poly(acrylic acid), and the tissue. Wet tissue adhesion can be achieved in a few seconds (adhesion strength of ∼30 kPa to porcine skin). Notably, the HDP-assembled hydrogel can maintain a low swelling rate and resist degradation in acidic aqueous environments (pH 1). Furthermore, HDPs can be delivered to target tissues by spraying via an endoscope. The results of in vivo experiments indicate that healing of gastric ESD perforations by sealing with the powder-assembled hydrogel is as effective as that by sealing with clips. This strategy is expected to facilitate the development of fast-acting hydrogel-based adhesives for endoscopic operation.
Collapse
|
18
|
Robust Electrostatically Interactive Hydrogel Coatings for Macroscopic Supramolecular Assembly via Rapid Wet Adhesion. ACS APPLIED MATERIALS & INTERFACES 2023; 15:21640-21650. [PMID: 37074265 DOI: 10.1021/acsami.3c02176] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/03/2023]
Abstract
A macroscopic supramolecular assembly (MSA) refers to non-covalent interactions between building blocks over a micrometer scale, which provides insights into bio-/wet adhesion, self-healing, and so on and new fabrication strategies to heterogeneous structures and bio-scaffolds. The key to realize the MSA of rigid materials is pre-modifying a compliant coating known as a "flexible spacing coating" beneath the interactive moieties. However, available coatings are limited to polyelectrolyte multilayers with shortcomings of tedious fabrication, weak adhesion to substrates, susceptibility to external reagents, and so on. Here, we develop a facile method to induce a new "flexible spacing coating" of a poly(2-hydroxyethyl methacrylate) (PHEMA) hydrogel with electrostatic interactions to achieve MSA of diverse rigid materials (quartz, metal, rubber, and plastics). Selective self-assembly of positive-negative charged surfaces is observed by the naked eye under 3 min of shaking in water, providing strategies to rapid wet adhesion. The interfacial binding force between positive-negative interacted surfaces is 1018.1 ± 299.2 N/m2, which is over two magnitudes larger than that of control groups, that is, positive-positive (24.4 ± 10.0 N/m2) and negative-negative (67.5 ± 16.7 N/m2) interacted surfaces. In situ force measurements and control experiments of identically charged building blocks have strongly supported the improved binding strength and chemical selectivity between interactive building blocks. The coating is advantageous with a simple fabrication, strong adhesion to materials, robust solvent tolerance to assembly solutions, and feasibility of photo-patterning. We envision that the above strategy would broaden the material choices of flexible spacing coatings for efficient MSA and new methods for rapid interfacial adhesion.
Collapse
|
19
|
Wet-Adhesive Multifunctional Hydrogel with Anti-swelling and a Skin-Seamless Interface for Underwater Electrophysiological Monitoring and Communication. ACS APPLIED MATERIALS & INTERFACES 2023; 15:11549-11562. [PMID: 36847327 DOI: 10.1021/acsami.2c21595] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/18/2023]
Abstract
A stable and seamless adhesion between the human skin and the hydrogel-based electronic skin is necessary for accurate sensing and human health monitoring in aquatic environments. Despite achieving significant progress in this field, it remains a great challenge to design skin-interfaced conductive hydrogels with high electrical conductivity, stablility, and seamless underwater adhesion to skin. Herein, a skin-inspired conductive multifunctional hydrogel is proposed, which has a wet-adhesive/hydrophilic and a non-adhesive/hydrophobic bilayer structure. The hydrogel shows high stretchability (∼2400%) and an ultra-low modulus (4.5 kPa), which facilitate the conformal and seamless attachment of the hydrogel to the skin with reduced motion artifacts. Owing to synergistic physical and chemical interactions, this hydrogel can achieve reliable underwater adhesion and display remarkable underwater adhesion strength (388.1 kPa) to porcine skin. In addition, MXene has been employed to obtain high electrical conductivity, create a route for stable electron transport, and reinforce mechanical properties. The hydrogel also possesses self-healing ability, a low swelling ratio (∼3.8%), biocompatibility, and specific adhesion to biological tissues in water. Facilitated with these advantages, the hydrogel-based electrodes achieve reliable electrophysiological signal detection in both air and wet conditions and demonstrate a higher signal-to-noise ratio (28.3 dB) than that of commercial Ag/AgCl gel electrodes (18.5 dB). Also, the hydrogel can be utilized as a strain sensor with high sensitivity for underwater communication. This multifunctional hydrogel improves the stability of the skin-hydrogel interface in aquatic environments and is expected to be promising for the next-generation bio-integrated electronics.
Collapse
|
20
|
Abstract
Pottery is the oldest art and plays a landmark role in human civilization. The repair of ceramic relics often uses acrylic resins and cyanoacrylate adhesives. However, existing adhesives often take hours to get cured, and wet adhesion is not possible. We herein propose a redox initiator-triggered hydrogel adhesive, of which robust (∼700 J m-2) and wet adhesion with potsherds can be achieved within a few seconds. The high toughness lies in the self-limited delocalized rupture of the porous interface, and the wet adhesion is due to the hydrophilic precursor and its free radical polymerization. The hydrogel adhesive also exhibits high aging resistance for stable preservation of ∼400 annuals. We have applied the adhesive to the restoration of artifacts excavated from Yinxu, Anyang (∼1300 BC) and the Xia Jiao Shan site (∼4000 BC, Neolithic), and the adhesive is expected to be extended to applications beyond archeology.
Collapse
|
21
|
Acceleration of Oral Wound Healing under Diabetes Mellitus Conditions Using Bioadhesive Hydrogel. ACS APPLIED MATERIALS & INTERFACES 2023; 15:416-431. [PMID: 36562739 PMCID: PMC9837818 DOI: 10.1021/acsami.2c17424] [Citation(s) in RCA: 10] [Impact Index Per Article: 10.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 09/27/2022] [Accepted: 12/06/2022] [Indexed: 06/17/2023]
Abstract
Oral wounds under diabetic conditions display a significant delay during the healing process, mainly due to oxidative stress-induced inflammatory status and abnormal immune responses. Besides, the wet and complicated dynamic environment of the oral cavity impedes stable treatment of oral wounds. To overcome these, a biomimetic hydrogel adhesive was innovatively developed based on a mussel-inspired multifunctional structure. The adhesive displays efficient adhesion and mechanical harmony on the oral mucosa through enhanced bonding in an acidic proinflammatory environment. The bioadhesive hydrogel exhibits excellent antioxidative properties by mimicking antioxidative enzymatic activities to reverse reactive oxygen species (ROS)-mediated immune disorders. Experiments on oral wounds of diabetic rats showed that this hydrogel adhesive could effectively protect against mucosal wounds and obviously shorten the inflammatory phase, thus promoting the wound-healing process. Therefore, this study offers a promising therapeutic choice with the potential to advance the clinical treatment of diabetic oral wounds.
Collapse
|
22
|
Mechanically Strong, Wet Adhesive, and Self-Healing Polyurethane Ionogel Enhanced with a Semi-interpenetrating Network for Underwater Motion Detection. ACS APPLIED MATERIALS & INTERFACES 2022; 14:54203-54214. [PMID: 36409304 DOI: 10.1021/acsami.2c15058] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/16/2023]
Abstract
The gel-based sensors have developed rapidly in recent years toward multifunctionality. However, there are still some challenges that need to be solved, such as poor mechanical properties and inaccessibility to wet or water environments. To address these issues, we have developed an ionogel with a semi-interpenetrating network structure by adopting poly(vinylidene fluoride-co-hexafluoropropylene) as the linear non-cross-linked network, a double-bonded ionic liquid and double-bonded capped polyurethane as the cross-linked network, and an ionic liquid as the conductive media. The obtained ionogel exhibits tunable mechanical properties (3.67-8.76 MPa) and excellent sensing properties (IG-20, GF = 8.2). The superb environmental stability and self-healing properties of the ionogel were also demonstrated. Meanwhile, adhesion, self-healing, and sensing performance were guaranteed for underwater due to the presence of a large number of C-F bonds. We strongly believe that this ionogel with excellent mechanical properties and underwater communication is expected for monitoring the health of the human body and information transmission in the future.
Collapse
|
23
|
Instant and Tough Adhesives for Rapid Gastric Perforation and Traumatic Pneumothorax Sealing. Adv Healthc Mater 2022; 11:e2201798. [PMID: 36148602 DOI: 10.1002/adhm.202201798] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/20/2022] [Revised: 09/13/2022] [Indexed: 01/28/2023]
Abstract
Hydrogel adhesives are hot spots due to their ubiquity and practical relevance. However, achieving a robust wet adhesion is still a challenge due to the preferential formation of hydrogen bonds between interfacial fluids and bulk hydrogel, as well as targeted substrates. Herein, a half-dry adhesive consisting of a silk fibroin (SF) semi-interpenetrating network and poly(acrylic acid) covalent network, which can allow a rapid liquid adsorption and repulsion process encountering a wet tissue, is reported. The remaining water enables excellent hydrogel flexibility to a dynamic surface, while the β-sheet fold endows its tough bulk strength under the peeling-off process. Notably, the wet adhesion energy versus porcine skin is 1440 J m-2 due to the combination of hydrogen bonds, electrostatic interactions, and chain entanglement derived from SF. In particular, both in vitro and in vivo outcomes indicate excellent hemostatic effects and result in incision closure of skin, artery, gastric perforation, and lung. After the first-stage closure, polyacrylic-silk fibroin adhesive (PSA) sealants can detach from the lung surface, fitting well to the healing period. By virtue of the reliable adhesion and good noncytotoxicity, PSA may be a prospective candidate for tissue sealant and drug carrier applications.
Collapse
|
24
|
Soft Microdenticles on Artificial Octopus Sucker Enable Extraordinary Adaptability and Wet Adhesion on Diverse Nonflat Surfaces. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2022; 9:e2202978. [PMID: 35975453 PMCID: PMC9631055 DOI: 10.1002/advs.202202978] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 05/20/2022] [Revised: 06/24/2022] [Indexed: 06/15/2023]
Abstract
Bioinspired soft devices, which possess high adaptability to targeted objects, provide promising solutions for a variety of industrial and medical applications. However, achieving stable and switchable attachment to objects with curved, rough, and irregular surfaces remains difficult, particularly in dry and underwater environments. Here, a highly adaptive soft microstructured switchable adhesion device is presented, which is inspired by the geometric and material characteristics of the tiny denticles on the surface of an octopus sucker. The contact interface of the artificial octopus sucker (AOS) is imprinted with soft, microscale denticles that interact adaptably with highly rough or curved surfaces. Robust and controllable attachment of the AOS with soft microdenticles (AOS-sm) to dry and wet surfaces with diverse morphologies is achieved, allowing conformal attachment on curved and soft objects with high roughness. In addition, AOS-sms assembled with an octopus-arm-inspired soft actuator demonstrate reliable grasping and the transport of complex polyhedrons, rough objects, and soft, delicate, slippery biological samples.
Collapse
|
25
|
Water uptake by gecko β-keratin and the influence of relative humidity on its mechanical and volumetric properties. JOURNAL OF THE ROYAL SOCIETY, INTERFACE 2022; 19:20220372. [PMID: 36128704 DOI: 10.1098/rsif.2022.0372] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/12/2022]
Abstract
Grand canonical ensemble molecular dynamics simulations are done to calculate the water content of gecko β-keratin as a function of relative humidity (RH). For comparison, we experimentally measured the water uptake of scales of the skin of cobra Naja nigricollis. The calculated sigmoidal sorption isotherm is in good agreement with experiment. To examine the softening effect of water on gecko keratin, we have calculated the mechanical properties of dry and wet keratin samples, and we have established relations between the mechanical properties and the RH. We found that a higher RH causes a decrease in the Young's modulus, the yield stress, the yield strain, the stress at failure and an increase in the strain at failure of the gecko keratin. At low RHs (less than 80%), the change in the mechanical properties is small, with most of the changes occurring at higher RHs. The changes in the macroscopic properties of the keratin are explained by the action of sorbed water on the molecular scale. It causes keratin to swell, thereby increasing the distances between amino acids. This has a weakening effect on amino acid interactions and softens the keratin material. The effect is more pronounced at higher RHs.
Collapse
|
26
|
Supramolecular Adhesive Materials with Antimicrobial Activity for Emerging Biomedical Applications. Pharmaceutics 2022; 14:1616. [PMID: 36015240 PMCID: PMC9414438 DOI: 10.3390/pharmaceutics14081616] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/13/2022] [Revised: 07/31/2022] [Accepted: 08/01/2022] [Indexed: 12/10/2022] Open
Abstract
Traditional adhesives or glues such as cyanoacrylates, fibrin glue, polyethylene glycol, and their derivatives have been widely used in biomedical fields. However, they still suffer from numerous limitations, including the mechanical mismatch with biological tissues, weak adhesion on wet surfaces, biological incompatibility, and incapability of integrating desired multifunction. In addition to adaptive mechanical and adhesion properties, adhesive biomaterials should be able to integrate multiple functions such as stimuli-responsiveness, control-releasing of small or macromolecular therapeutic molecules, hosting of various cells, and programmable degradation to fulfill the requirements in the specific biological systems. Therefore, rational molecular engineering and structural designs are required to facilitate the development of functional adhesive materials. This review summarizes and analyzes the current supramolecular design strategies of representative adhesive materials, serving as a general guide for researchers seeking to develop novel adhesive materials for biomedical applications.
Collapse
|
27
|
Tough, Anti-Swelling Supramolecular Hydrogels Mediated by Surfactant-Polymer Interactions for Underwater Sensors. ACS APPLIED MATERIALS & INTERFACES 2022; 14:30385-30397. [PMID: 35737578 DOI: 10.1021/acsami.2c06395] [Citation(s) in RCA: 17] [Impact Index Per Article: 8.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
It is a great challenge for traditional hydrogel-based sensors to be effective underwater due to unsatisfactory water resistance and insufficient wet adhesion. Herein, a tough supramolecular hydrogel aiming at underwater sensing is prepared by the modification of hydrophilic poly(acrylic acid) (PAA) with a small amount of hydrophobic lauryl methacrylate (LMA) in the presence of high concentrations of the cationic surfactant cetyltrimethylammonium bromide (CTAB). Owing to the synergistic effects of the electrostatic interactions and hydrophobic associations of CTAB with the P(AA-co-LMA) copolymer, the hydrogel with a water content of approximately 58.5 wt % demonstrates outstanding anti-swelling feature, superior tensile strength (≈1.6 MPa), large stretchability (>900%), rapid room-temperature self-recovery (≈3 min at 100% strain), and robust wet adhesion to diverse substrates. Moreover, the strain sensor based on the hydrogel displays keen sensitivity in a sensing range of 0-900% (gauge factor is 0.42, 3.44, 5.44, and 7.39 in the strain range of 0-100, 100-300, 300-500, and 500-900%, respectively) and pronounced stability both in air and underwater. Additionally, the hydrogel can be easily recycled by dissolving in anhydrous ethanol. This work provides a facile strategy to fabricate eco-friendly, tough supramolecular hydrogels for underwater sensing.
Collapse
|
28
|
A Dual-Bioinspired Tissue Adhesive Based on Peptide Dendrimer with Fast and Strong Wet Adhesion. Adv Healthc Mater 2022; 11:e2200874. [PMID: 35657075 DOI: 10.1002/adhm.202200874] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/18/2022] [Revised: 05/12/2022] [Indexed: 02/05/2023]
Abstract
Although tissue adhesives have potential advantages over traditional sutures, existing ones suffer from several limitations: slow adhesion kinetic, low mechanical strength, and poor interfacial bonding with wet biological tissues. Herein, a cooperative mussel/slug double-bioinspired hydrogel adhesive (DBHA) composed of a robust adhesive interface and a stretchable dissipative matrix is developed. The DBHA is formed by a cationic polysaccharide (chitosan), an anionic polysaccharide (carboxymethyl cellulose), and a barbell-like dendritic lysine grafted with catechol groups (G3KPCA). Compared to various commercial bio-glues and traditional adhesives, the DBHA has significantly stronger tissue adhesion and enhanced toughness both ex vivo and in vivo. Meanwhile, the DBHA exhibits fast, strong, tough, and durable adhesion to diverse ex vivo tissue surfaces with blood. The adhesion energy between the adhesive and porcine skin can reach 200-900 J m-2 . Additionally, in vivo studies prove that DBHA has good hemostasis of rabbit artery trauma and achieves better wound healing of tissue incision than commercial bio-glues. This study provides a novel strategy for fabricating fast and strong wet adhesives, which can be used in many applications, such as soft robots, tissue adhesives and hemostats.
Collapse
|
29
|
Mussel Inspired Trigger-Detachable Adhesive Hydrogel. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2022; 18:e2200336. [PMID: 35460194 DOI: 10.1002/smll.202200336] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/17/2022] [Revised: 03/12/2022] [Indexed: 06/14/2023]
Abstract
Adhesion to many kinds of surfaces, including biological tissues, is important in many fields but has been proved to be extremely challenging. Furthermore, peeling from strong adhesion is needed in many conditions, but is sometimes painful. Herein, a mussel inspired hydrogel is developed to achieve both strong adhesion and trigger-detachment. The former is actualized by electrostatic interactions, covalent bonds, and physical interpenetration, while the latter is triggered, on-demand, through combining a thixotropic supramolecular network and polymer double network. The results of the experiments show that the hydrogel can adhere to various material surfaces and tissues. Moreover, triggered by shear force, non-covalent interactions of the supramolecular network are destroyed. This adhesion can be peeled easily. The possible mechanism involved is discussed and proved. This work will bring new insight into electronic engineering and tissue repair like skin care for premature infants and burn victims.
Collapse
|
30
|
Attachment of bioinspired microfibrils in fluids: transition from a hydrodynamic to hydrostatic mechanism. J R Soc Interface 2022; 19:20220050. [PMID: 35382580 PMCID: PMC8984370 DOI: 10.1098/rsif.2022.0050] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/12/2022] Open
Abstract
Reversible and switchable adhesion of elastomeric microstructures has attracted significant interest in the development of grippers for object manipulation. Their applications, however, have often been limited to dry conditions and adhesion of such deformable microfibrils in the fluid environment is less understood. In the present study, we performed adhesion tests in silicone oil using single cylindrical microfibrils of a flat-punch shape with a radius of 80 µm. Stiff fibrils were created using three-dimensional printing of an elastomeric resin with an elastic modulus of 500 MPa, and soft fibrils, with a modulus of 3.3 MPa, were moulded in polyurethane. Our results suggest that adhesion is dominated by hydrodynamic forces, which can be maximized by stiff materials and high retraction velocities, in line with theoretical predictions. The maximum pull-off stress of stiff cylindrical fibrils is 0.6 MPa, limited by cavitation and viscous fingering, occurring at retraction velocities greater than 2 µm s-1. Next, we add a mushroom cap to the microfibrils, which, in the case of the softer material, deforms upon retraction and leads to a transition to a hydrostatic suction regime with higher pull-off stresses ranging from 0.7 to 0.9 MPa. The effects of elastic modulus, fibril size and viscosity for underwater applications are illustrated in a mechanism map to provide guidance for design optimization.
Collapse
|
31
|
A biomimetic remora disc with tunable, reversible adhesion for surface sliding and skimming. BIOINSPIRATION & BIOMIMETICS 2022; 17:036001. [PMID: 35073526 DOI: 10.1088/1748-3190/ac4e7a] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/07/2021] [Accepted: 01/24/2022] [Indexed: 06/14/2023]
Abstract
Remora suckerfish (Echeneis naucrates) can perform skimming and sliding motions on the surfaces of moving hosts to optimize adhesion positions. We found that remora achieve skimming and sliding motions through coordinated movement of the suction disc's lamellae and lip locomotion through live animal observations. We implemented an integrated biomimetic remora suction disc based on morphological and kinematic data of biological remoras. With soft actuators enabling 'compression-rotation' and 'compression-extension', the biomimetic disc controls the disc lip and lamellar movement under driving with only one degree of freedom, and can switch freely between three states: zero, low-friction, and robust adhesion. Then we investigate the effects of the biomimetic suction-disc soft-lip material, preload, and lamellar movement on the tangential friction force (both forward and backward) under different adhesion states. This biomimetic suction disc with a low-modulus soft lip can adhere to a smooth surface under 0.1 N preload and achieve normal adhesion-force and tangential frictional-force control ranges spanning ∼10-1to ∼102N and ∼10-1to ∼101N, respectively. The results reveal how remora disc achieved fast, tunable adhesion for skimming and sliding on surfaces. Furthermore, we demonstrate a bio-inspired robot capable of attachment, detachment, skimming, and sliding motions with the aiding of simple biomimetic pectoral-fin flapping. This study lays a foundation for future integrated applications of underwater adhesion robots and related biomechanical exploration.
Collapse
|
32
|
An Electronically Perceptive Bioinspired Soft Wet-Adhesion Actuator with Carbon Nanotube-Based Strain Sensors. ACS NANO 2021; 15:14137-14148. [PMID: 34425674 DOI: 10.1021/acsnano.1c05130] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
The development of bioinspired switchable adhesive systems has promising solutions in various industrial/medical applications. Switchable and perceptive adhesion regardless of the shape or surface shape of the object is still challenging in dry and aquatic surroundings. We developed an electronic sensory soft adhesive device that recapitulates the attaching, mechanosensory, and decision-making capabilities of a soft adhesion actuator. The soft adhesion actuator of an artificial octopus sucker may precisely control its robust attachment against surfaces with various topologies in wet environments as well as a rapid detachment upon deflation. Carbon nanotube-based strain sensors are three-dimensionally coated onto the irregular surface of the artificial octopus sucker to mimic nerve-like functions of an octopus and identify objects via patterns of strain distribution. An integration with machine learning complements decision-making capabilities to predict the weight and center of gravity for samples with diverse shapes, sizes, and mechanical properties, and this function may be useful in turbid water or fragile environments, where it is difficult to utilize vision.
Collapse
|
33
|
Abstract
During operations, surgical mesh is commonly fixed on tissues through fasteners such as sutures and staples. Attributes of surgical mesh include biocompatibility, flexibility, strength, and permeability, but sutures and staples may cause stress concentration and tissue damage. Here, we show that the functions of surgical mesh can be significantly broadened by developing a family of materials called hydrogel-mesh composites (HMCs). The HMCs retain all the attributes of surgical mesh and add one more: adhesion to tissues. We fabricate an HMC by soaking a surgical mesh with a precursor, and upon cure, the precursor forms a polymer network of a hydrogel, in macrotopological entanglement with the fibers of the surgical mesh. In a surgery, the HMC is pressed onto a tissue, and the polymers in the hydrogel form covalent bonds with the tissue. To demonstrate the concept, we use a poly(N-isopropylacrylamide) (PNIPAAm)/chitosan hydrogel and a polyethylene terephthalate (PET) surgical mesh. In the presence a bioconjugation agent, the chitosan and the tissue form covalent bonds, and the adhesion energy reaches above 100 J⋅m-2 At body temperature, PNIPAAm becomes hydrophobic, so that the hydrogel does not swell and the adhesion is stable. Compared with sutured surgical mesh, the HMC distributes force over a large area. In vitro experiments are conducted to study the application of HMCs to wound closure, especially on tissues under high mechanical stress. The performance of HMCs on dynamic living tissues is further investigated in the surgery of a sheep.
Collapse
|
34
|
Environmentally Compatible Wearable Electronics Based on Ionically Conductive Organohydrogels for Health Monitoring with Thermal Compatibility, Anti-Dehydration, and Underwater Adhesion. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2021; 17:e2101151. [PMID: 34013638 DOI: 10.1002/smll.202101151] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/24/2021] [Revised: 04/01/2021] [Indexed: 05/21/2023]
Abstract
Hydrogel-based electronics have found widespread applications in soft sensing and health monitoring because of their remarkable biocompatibility and mechanical features similar to human skin. However, they are subjected to potential challenges like structural failure, functional degradation, and device delamination in practical applications, especially facing extreme environmental conditions (e.g., abnormal temperature and humidity). To address these, ionically conductive organohydrogel-based soft electronics are developed, which can perform at subzero and elevated temperatures (thermal compatibility) as well as at dehydrated and hydrated environments (hydration compatibility) for extended applications. More specifically, gelatin/poly(acrylic acid-N-hydrosuccinimide ester) (PAA-NHS ester)-based ionic-conductive organohydrogel is synthesized. By introducing a glycerol-water binary solvent system, the gel can maintain mechanical softness in a wide temperature range (from -80 to 60 °C). Besides, excellent conductivity is achieved under various conditions by soaking the gel into lithium chloride anhydrous (LiCl) solution. Strong adhesion with skin, even under water, can be realized by covalent bonds between NHS ester from gel and amino groups from human skin. The excellent performances of LiCl-loaded PAA-based organohydrogel (L-PAA-OH)-based electronics are further demonstrated under freezing and high temperatures as well as underwater conditions, unveiling their promising prospects in wearable health monitoring in various conditions.
Collapse
|
35
|
A Spider-Silk-Inspired Wet Adhesive with Supercold Tolerance. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2021; 33:e2007301. [PMID: 33660351 DOI: 10.1002/adma.202007301] [Citation(s) in RCA: 35] [Impact Index Per Article: 11.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/25/2020] [Revised: 01/06/2021] [Indexed: 05/13/2023]
Abstract
Conventional adhesives often encounter interfacial failure in humid conditions due to small droplets of water condensed on surface, but spider silks can capture prey in such environment. Here a robust spider-silk-inspired wet adhesive (SA) composed of core-sheath nanostructured fibers with hygroscopic adhesive nanosheath (poly(vinylpyrrolidone)) and supporting nanocore (polyurethane) is reported. The wet adhesion of the SA is achieved by a unique dissolving-wetting-adhering process of core-sheath nanostructured fibers, revealed by in situ observations at macro- and microscales. Further, the SA maintains reliable adhesion on wet and cold substrates from 4 to -196 °C and even tolerates splashing, violent shaking, and weight loading in liquid nitrogen (-196 °C), showing promising applicability in cryogenic environments. This study will provide an innovative route to design functional wet adhesives.
Collapse
|
36
|
Bio-Based Hotmelt Adhesives with Well-Adhesion in Water. Polymers (Basel) 2021; 13:666. [PMID: 33672307 PMCID: PMC7927086 DOI: 10.3390/polym13040666] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/05/2021] [Revised: 02/16/2021] [Accepted: 02/18/2021] [Indexed: 12/17/2022] Open
Abstract
We suggest a simple idea of bio-based adhesives with strong adhesion even under water. The adhesives simply prepared via polycondensation of 3,4-dihydroxyhydrocinnamic acid (DHHCA) and lactic acid (LA) in one pot polymerization. Poly(DHHCA-co-LA) has a hyperbranched structure and demonstrated strong dry and wet adhesion strength on diverse material surfaces. We found that their adhesion strength depended on the concentration of DHHCA. Poly(DHHCA-co-LA) with the lowest concentration of DHHCA showed the highest adhesion strength in water with a value of 2.7 MPa between glasses, while with the highest concentration of DHHCA it exhibited the highest dry adhesion strength with a value of 3.5 MPa, which was comparable to commercial instant super glue. Compared to underwater glues reported previously, our adhesives were able to spread rapidly under water with a low viscosity and worked strongly. Poly(DHHCA-co-LA) also showed long-term stability and kept wet adhesion strength of 2.2 MPa after steeping in water for 1 month at room temperature (initial strength was 2.4 MPa). In this paper, Poly(DHHCA-co-LA) with strong dry and wet adhesion properties and long-term stability was demonstrated for various kinds of applications, especially for wet conditions.
Collapse
|
37
|
Nanomechanical Insights into Versatile Polydopamine Wet Adhesive Interacting with Liquid-Infused and Solid Slippery Surfaces. ACS APPLIED MATERIALS & INTERFACES 2021; 13:6941-6950. [PMID: 33523622 DOI: 10.1021/acsami.0c22073] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/27/2023]
Abstract
Mussel-inspired polydopamine (PDA) can be readily deposited on almost all kinds of substrates and possesses versatile wet adhesion. Meanwhile, slippery surfaces have attracted much attention for their self-cleaning capabilities. It remains unclear how the versatile PDA adhesive would interact with slippery surfaces. In this work, both liquid-infused poly(tetrafluoroethylene) (PTFE) (LI-PTFE) and solid slippery surfaces (i.e., self-assembly of small thiol-terminated organosilane, polysiloxane covalently attached to substrates) were fabricated to investigate their capability to prevent PDA deposition. It was found that PDA particles could be easily deposited on a PTFE membrane and the two types of solid slippery surfaces, which resulted in the alternation of their surface wettability and slippery behavior of water droplets. Adhesion was detected between a PDA-coated silica colloidal probe and the PTFE membrane or solid slippery surfaces through quantitative force measurements using an atomic force microscope (AFM), mainly due to van der Waals (vdW) and hydrophobic interactions, which led to the PDA deposition phenomenon. In contrast, LI-PTFE with a thin liquid lubricant film could effectively prevent PDA deposition, with negligible changes in surface morphology, wettability, and slippery characteristics. Although PDA particles could be loosely attached to the lubricant/water interface for LI-PTFE based on the capillary adhesion measured by AFM, they could be readily removed by gentle rinsing with water, as demonstrated by the ultralow friction over LI-PTFE as compared to PTFE using lateral force microscopy (LFM). Our results indicate that LI-PTFE possesses excellent antifouling and self-cleaning properties even when interacting with the versatile PDA wet adhesives. This work provides new insights into the deposition of PDA on slippery surfaces and their interaction mechanism at the nanoscale, with useful implications for the design and development of novel slippery surfaces.
Collapse
|
38
|
Adhesive Coacervates Driven by Hydrogen-Bonding Interaction. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2020; 16:e2004132. [PMID: 33006447 DOI: 10.1002/smll.202004132] [Citation(s) in RCA: 19] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/08/2020] [Revised: 08/27/2020] [Indexed: 06/11/2023]
Abstract
Coacervation plays a critical role in numerous biological activities such as constructing biological tissues and achieving robust wet adhesion of marine sessile organisms, which conventionally occurs when oppositely charged polyelectrolytes are mixed in aqueous solutions driven by electrostatic attraction. Here, a novel type of adhesive coacervate is reported, driven by hydrogen-bonding interactions, readily formed by mixing silicotungstic acid and nonionic polyethylene glycol in water, providing a new approach for developing coacervates from nonionic systems. The as-prepared coacervate is easily paintable underwater, show strong wet adhesion to diverse substrates, and has been successfully applied as a hemostatic agent to treat organ injuries without displaying hemolytic activity, while with inherent antimicrobial properties thus avoiding inflammations and infections due to microorganism accumulation. This work demonstrates that coacervation can occur in salt-free environments via non-electrostatic interactions, providing a new platform for engineering multifunctional coacervate materials as tissue glues, wound dressings and membrane-free cell systems.
Collapse
|
39
|
An Antifreezing/Antiheating Hydrogel Containing Catechol Derivative Urushiol for Strong Wet Adhesion to Various Substrates. ACS APPLIED MATERIALS & INTERFACES 2020; 12:32031-32040. [PMID: 32539329 DOI: 10.1021/acsami.0c09917] [Citation(s) in RCA: 38] [Impact Index Per Article: 9.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
Tough adhesive hydrogels that can tightly bond to wet tissue/polymer/ceramic/metal surfaces have great potentials in various fields. However, conventional adhesive hydrogels usually show short-term and nonreversible adhesion ability, as the water component in a hydrogel readily transforms to vapor or ice in response to fluctuation of environment temperature, hindering their applications in extreme conditions such as in freezing Arctic and roasting Africa. For the first time, urushiol (UH), a natural catechol derivative with a long alkyl side chain, is used as a starting material to copolymerize with acrylamide for fabricating adhesive hydrogels, which contain hydrophobic/hydrophilic moieties, antifreezing agent, and adhesive catechol groups. The antifreezer/moisturizer glycerol/water binary solvent dispersed in the hydrogel endows it with antifreezing/antiheating property. The hydrophobic association and π-π interaction from UH moieties of the copolymer greatly improve its mechanical strength (tensile stress: ∼0.12 MPa with strain of ∼1100%, toughness: ∼72 kJ/m3, compression stress: ∼6.72 MPa at strain of 90%). The hydrogel can strongly adhere to various dry/wet biological/polymeric/ceramic/metallic substrates at temperatures ranging from -45 to 50 °C. Under ambient conditions, its adhesion force to porcine skin, glass, and tinplate may reach up to 160, 425, and 275 N/m, respectively. Even stored at -45 or 50 °C for 30 d, the hydrogel still maintains good flexibility and robust adhesion force. It also shows repeatable underwater adhesion to biological tissue, glass, ceramic, plastic, and rubber. This novel antifreezing/antiheating adhesive hydrogel may be applied in extremely cold or hot environments and in underwater conditions.
Collapse
|
40
|
Abstract
Bioadhesives such as tissue adhesives, hemostatic agents, and tissue sealants have potential advantages over sutures and staples for wound closure, hemostasis, and integration of implantable devices onto wet tissues. However, existing bioadhesives display several limitations including slow adhesion formation, weak bonding, low biocompatibility, poor mechanical match with tissues, and/or lack of triggerable benign detachment. Here, we report a bioadhesive that can form instant tough adhesion on various wet dynamic tissues and can be benignly detached from the adhered tissues on demand with a biocompatible triggering solution. The adhesion of the bioadhesive relies on the removal of interfacial water from the tissue surface, followed by physical and covalent cross-linking with the tissue surface. The triggerable detachment of the bioadhesive results from the cleavage of bioadhesive's cross-links with the tissue surface by the triggering solution. After it is adhered to wet tissues, the bioadhesive becomes a tough hydrogel with mechanical compliance and stretchability comparable with those of soft tissues. We validate in vivo biocompatibility of the bioadhesive and the triggering solution in a rat model and demonstrate potential applications of the bioadhesive with triggerable benign detachment in ex vivo porcine models.
Collapse
|
41
|
Abstract
Many insects can climb on smooth inverted substrates using adhesive hairy pads on their legs. The hair-surface contact is often mediated by minute volumes of liquid, which form capillary bridges in the contact zones and aid in adhesion. The liquid transport to the contact zones is poorly understood. We investigated the dynamics of liquid secretion in the dock beetle Gastrophysa viridula by quantifying the volume of the deposited liquid footprints during simulated walking experiments. The footprint volume increased with pad-surface contact time and was independent of the non-contact time. Furthermore, the footprint volume decreased to zero after reaching a threshold cumulative volume (approx. 30 fl) in successive steps. This suggests a limited reservoir with low liquid influx. We modelled our results as a fluidic resistive system and estimated the hydraulic resistance of a single attachment hair of the order of MPa · s/fl. The liquid secretion in beetle hairy pads is dominated by passive suction of the liquid during the contact phase. The high calculated resistance of the secretion pathway may originate from the nanosized channels in the hair cuticle. Such nanochannels presumably mediate the transport of cuticular lipids, which are chemically similar to the adhesive liquid.
Collapse
|
42
|
Tree Frog-Inspired Micropillar Arrays with Nanopits on the Surface for Enhanced Adhesion under Wet Conditions. ACS APPLIED MATERIALS & INTERFACES 2020; 12:19116-19122. [PMID: 32216267 DOI: 10.1021/acsami.9b22532] [Citation(s) in RCA: 24] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Inspired by the nanoconcave top of epidermal cells on tree frogs' toe pads, an array of composite micropillars with nanopits on the surface (CPp) has been designed. Polystyrene (PS) nanoparticles are mixed with polydimethylsiloxane (PDMS) and serve as the template for nanopits on the PS/PDMS composite micropillars. CPp shows much larger wet adhesion compared to the arrays of micropillars without nanopits. Under a certain loading force, most of the liquid between CPp and the counterpart surface is squeezed out, so the liquid that remained in nanopits forms multiple nanoscale liquid bridges within the contact area of a single micropillar. Moreover, a large loading force could squeeze part of the liquid out of nanopits, resulting in the suction effect during the pull-off. The multiple liquid bridges, the suction effect, and the solid direct contact thus contribute to strong wet adhesion, which could be ∼36.5 times that of tree frogs' toe pads. The results suggest the function of nanoconcaves on the toe pad of tree frogs and offer a new design strategy for structured adhesives to gain strong wet adhesion.
Collapse
|
43
|
Abstract
Marine mussels secret catechol-containing adhesive proteins that enable these organisms to bind to various surfaces underwater. Synthetic mimics of these proteins have been created to function as adhesives and coatings for a wide range of applications. Here, we demonstrated the use of in situ electrical field stimulation to deactivate the adhesive property of catechol-containing adhesive that is in direct contact with a surface. Johnson-Kendall-Roberts (JKR) contact mechanics test was performed using a titanium (Ti) sphere in the presence of a pH 7.5 aqueous buffer. The Ti sphere also served as a conductive electrode for applying electricity to the adhesive, while a platinum (Pt) wire served as the counter electrode. Work of adhesion (Wadh) decreased with increased levels of applied voltage and current, exposure time to the applied electricity, and salt concentration of the interfacial buffer. Application of 9 V for 1 min completely deactivated the adhesive. UV-vis diffuse reflectance spectra and tracking of catechol oxidation byproduct, hydrogen peroxide, confirmed that catechol was oxidized as a result of applied electricity. Contact mechanics testing further confirmed that the Young's modulus of the adhesive increased by nearly 4 folds at the interface as a result of oxidative cross-linking, even though the modulus of the bulk of the adhesive was unaffected by applied electricity. The accumulation of hydroxyl ions near the cathode increased the local solution pH, which promoted oxidation-induced cross-linking of catechol and subsequently decreased its adhesive property. Tuning adhesive properties through in situ electrochemical oxidation provides on-demand control over the adhesive, which will potentially add another dimension in designing synthetic mimics of mussel adhesive proteins.
Collapse
|
44
|
Strong Wet and Dry Adhesion by Cupped Microstructures. ACS APPLIED MATERIALS & INTERFACES 2019; 11:26483-26490. [PMID: 31241296 PMCID: PMC6660100 DOI: 10.1021/acsami.9b07969] [Citation(s) in RCA: 23] [Impact Index Per Article: 4.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 05/07/2019] [Accepted: 06/26/2019] [Indexed: 06/09/2023]
Abstract
Recent advances in bio-inspired microfibrillar adhesives have resulted in technologies that allow reliable attachment to a variety of surfaces. Because capillary and van der Waals forces are considerably weakened underwater, fibrillar adhesives are however far less effective in wet environments. Although various strategies have been proposed to achieve strong reversible underwater adhesion, strong adhesives that work both in air and underwater without additional surface treatments have yet to be developed. In this study, we report a novel design-cupped microstructures (CM)-that generates strong controllable adhesion in air and underwater. We measured the adhesive performance of cupped polyurethane microstructures with three different cup angles (15, 30, and 45°) and the same cup diameter of 100 μm in dry and wet conditions in comparison to standard mushroom-shaped microstructures (MSMs) of the same dimensions. In air, 15°CM performed comparably to the flat MSM of the same size with an adhesion strength (force per real contact area) of up to 1.3 MPa, but underwater, 15°CM achieved 20 times stronger adhesion than MSM (∼1 MPa versus ∼0.05 MPa). Furthermore, the cupped microstructures exhibit self-sealing properties, whereby stronger pulls lead to longer stable attachment and much higher adhesion through the formation of a better seal.
Collapse
|
45
|
Elasto-capillarity in insect fibrillar adhesion. J R Soc Interface 2017; 13:rsif.2016.0371. [PMID: 27488250 DOI: 10.1098/rsif.2016.0371] [Citation(s) in RCA: 25] [Impact Index Per Article: 3.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/12/2016] [Accepted: 07/12/2016] [Indexed: 11/12/2022] Open
Abstract
The manipulation of microscopic objects is challenging because of high adhesion forces, which render macroscopic gripping strategies unsuitable. Adhesive footpads of climbing insects could reveal principles relevant for micro-grippers, as they are able to attach and detach rapidly during locomotion. However, the underlying mechanisms are still not fully understood. In this work, we characterize the geometry and contact formation of the adhesive setae of dock beetles (Gastrophysa viridula) by interference reflection microscopy. We compare our experimental results to the model of an elastic beam loaded with capillary forces. Fitting the model to experimental data yielded not only estimates for seta adhesion and compliance in agreement with previous direct measurements, but also previously unknown parameters such as the volume of the fluid meniscus and the bending stiffness of the tip. In addition to confirming the primary role of surface tension for insect adhesion, our investigation reveals marked differences in geometry and compliance between the three main kinds of seta tips in leaf beetles.
Collapse
|
46
|
Studies on Mathematical Models of Wet Adhesion and Lifetime Prediction of Organic Coating/Steel by Grey System Theory. MATERIALS 2017; 10:ma10070715. [PMID: 28773073 PMCID: PMC5551758 DOI: 10.3390/ma10070715] [Citation(s) in RCA: 21] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 06/04/2017] [Revised: 06/22/2017] [Accepted: 06/26/2017] [Indexed: 11/16/2022]
Abstract
A rapid degradation of wet adhesion is the key factor controlling coating lifetime, for the organic coatings under marine hydrostatic pressure. The mathematical models of wet adhesion have been studied by Grey System Theory (GST). Grey models (GM) (1, 1) of epoxy varnish (EV) coating/steel and epoxy glass flake (EGF) coating/steel have been established, and a lifetime prediction formula has been proposed on the basis of these models. The precision assessments indicate that the established models are accurate, and the prediction formula is capable of making precise lifetime forecasting of the coatings.
Collapse
|
47
|
Hydrazide-Derivatized Microgels Bond to Wet, Oxidized Cellulose Giving Adhesion Without Drying or Curing. ACS APPLIED MATERIALS & INTERFACES 2017; 9:21000-21009. [PMID: 28562005 DOI: 10.1021/acsami.7b04700] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/24/2023]
Abstract
Hydrazide-derivatized poly(N-isopropylacrylamide-co-acrylic acid) microgels gave strong adhesion to wet, TEMPO oxidized, regenerated cellulose membranes without a drying or heating step. Adhesion was attributed to hydrazone covalent bond formation with aldehyde groups present on the cellulose surfaces. This is one of only three chemistries we have found that gives significant never-dried adhesion between wet cellulose surfaces. By contrast, for cellulose joints that have been dried and heated before wet testing, the hydrazide-hydrazone chemistry offers no advantages over standard paper industry wet strength resins. The design rules for the hydrazide-microgel adhesives include: cationic microgels are superior to anionic gels; the lower the microgel cross-link density, the higher the adhesion; longer PEG-based hydrazide tethers offer no advantage over shorter attachments; and, adhesion is independent of microgel diameter. Many of these rules were in agreement with predictions of a simple adhesion model where the microgels were assumed to be ideal springs. We propose that the unexpected, high cohesion between neighboring microgels in multilayer films was a result of bond formation between hydrazide groups and residual NHS-carboxyl esters from the preparation of the hydrazide microgels.
Collapse
|
48
|
A Bone Glue with Sustained Adhesion under Wet Conditions. Adv Healthc Mater 2017; 6. [PMID: 27990768 DOI: 10.1002/adhm.201600902] [Citation(s) in RCA: 19] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/12/2016] [Revised: 11/02/2016] [Indexed: 11/08/2022]
Abstract
Bone glues often suffer from low adhesion to bone under wet conditions. This study aims to improve wet adhesiveness of a bone glue based on a photocurable poly(ethylene glycol) dimethacrylate matrix through in situ interpenetrating network formation by addition of six-armed isocyanate functional star-shaped prepolymers (NCO-sP(EO-stat-PO)). Biodegradable ceramic fillers are added to adjust the paste workability. The 3-point bending strength of the bone glues is in the range of 3.5-5.5 MPa and not significantly affected by the addition of NCO-sP(EO-stat-PO). Storage in phosphate buffered saline (PBS) decreases the bending strength of all formulations to approximately 1 MPa but the adhesion to cortical bone increases from 0.15-0.2 to 0.3-0.5 MPa after adding 20-40 wt% NCO-sP(EO-stat-PO) to the matrix. Bone glues without the NCO-sP(EO-stat-PO) additive lose their adhesiveness to bone after aging in PBS for 7 days, whereas modified glues maintain a shear strength of 0.18-0.25 MPa demonstrating the efficacy of the approach. Scanning electron microscopy and energy-dispersive X-ray spectroscopy investigations of the fracture surfaces prove a high amount of residual adhesive on the bone surface indicating that adhesion to the bone under wet conditions is stronger than cohesion.
Collapse
|
49
|
Recent approaches in designing bioadhesive materials inspired by mussel adhesive protein. JOURNAL OF POLYMER SCIENCE. PART A, POLYMER CHEMISTRY 2017; 55:9-33. [PMID: 27917020 PMCID: PMC5132118 DOI: 10.1002/pola.28368] [Citation(s) in RCA: 342] [Impact Index Per Article: 48.9] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 08/01/2016] [Accepted: 09/03/2016] [Indexed: 12/11/2022]
Abstract
Marine mussels secret protein-based adhesives, which enable them to anchor to various surfaces in a saline, intertidal zone. Mussel foot proteins (Mfps) contain a large abundance of a unique, catecholic amino acid, Dopa, in their protein sequences. Catechol offers robust and durable adhesion to various substrate surfaces and contributes to the curing of the adhesive plaques. In this article, we review the unique features and the key functionalities of Mfps, catechol chemistry, and strategies for preparing catechol-functionalized polymers. Specifically, we reviewed recent findings on the contributions of various features of Mfps on interfacial binding, which include coacervate formation, surface drying properties, control of the oxidation state of catechol, among other features. We also summarized recent developments in designing advanced biomimetic materials including coacervate-forming adhesives, mechanically improved nano- and micro-composite adhesive hydrogels, as well as smart and self-healing materials. Finally, we review the applications of catechol-functionalized materials for the use as biomedical adhesives, therapeutic applications, and antifouling coatings. © 2016 The Authors. Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017, 55, 9-33.
Collapse
|
50
|
Rapid Development of Wet Adhesion between Carboxymethylcellulose Modified Cellulose Surfaces Laminated with Polyvinylamine Adhesive. ACS APPLIED MATERIALS & INTERFACES 2016; 8:24161-24167. [PMID: 27552256 DOI: 10.1021/acsami.6b05673] [Citation(s) in RCA: 10] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/06/2023]
Abstract
The surface of regenerated cellulose membranes was modified by irreversible adsorption of carboxymethylcellulose (CMC). Pairs of wet CMC-modified membranes were laminated with polyvinylamine (PVAm) at room temperature, and the delamination force for wet membranes was measured for both dried and never-dried laminates. The wet adhesion was studied as a function of PVAm molecular weight, amine content, and deposition pH of the polyelectrolyte. Surprisingly the PVAm-CMC system gave substantial wet adhesion that exceeded that of TEMPO-oxidized membranes with PVAm for both dried and never-dried laminates. The greatest wet adhesion was achieved for fully hydrolyzed high molecular weight PVAm. Bulk carboxymethylation of cellulose membranes gave inferior wet adhesion combined with PVAm as compared to CMC adsorption which indicates that a CMC layer of the order of 10 nm was necessary. There are no obvious covalent cross-linking reactions between CMC and PVAm at room temperature, and on the basis of our results, we are instead attributing the wet adhesion to complex formation between the PVAm and the irreversibly adsorbed CMC at the cellulose surface. We propose that interdigitation of PVAm chains into the CMC layer is responsible for the high wet adhesion values.
Collapse
|