Emission of volatile sulphur compounds during swine manure composting: Source identification, odour mitigation and assessment

This study aimed to identify the sources of volatile sulphur compounds (VSCs) and evaluate their mitigation by ferric oxide (Fe₂O₃) during swine manure composting. Four chemicals, including l-cysteine, l-methionine, sodium sulphite, and sodium sulphate, were further added to simulate organic and inorganic sulphur-containing substances in swine manure to track VSC sources during composting. Results show that sulphur simulants induced the emission of six common VSCs, including methyl sulphide (Me₂S), dimethyl sulphide (Me₂SS), carbonyl sulphide (COS), carbon disulphide (CS₂), methyl mercaptan (MeSH), and ethyl mercaptan (EtSH), during swine manure composting. Of them, COS, CS₂, MeSH and Me₂SS were predominantly contributed by the biodegradation of methionine and cysteine, while Me₂S and EtSH were dominated by the reduction of sulphite and sulphate. Further Fe₂O₃ addition at 1.5 % of total wet weight of composting materials immobilized elemental sulphur and inhibited sulphate reduction to reduce the emission of VSCs by 46.7-80.9 %. Furthermore, odour assessment indicated that adding Fe₂O₃ into composting piles significantly reduced the odour intensity level to below 4, the odour value of VSCs by 47.1-81.3 %, and thus the non-carcinogenic risk by 68.4 %.

Occupational risk factors for hypertension

The identification and characterization of the modifiable risk factors of hypertension is of great value for public health and clinical medicine to achieve primary prevention. A large amount of literature on the effects of occupational factors on blood pressure and hypertension has been published. In this review, I summarize current evidence regarding the role of occupational factors in hypertension. The results of this review suggest that there is sufficient evidence to support the association between increased risk of hypertension and job stress, shift work, occupational lead exposure, and noise exposure. The association of hypertension with physical inactivity, sedentary behavior, and occupational exposure to mercury, arsenic, cadmium, or carbon disulfide remains inconclusive, although several studies have reported this finding. This review will serve as a step toward future research and provide baseline information for developing strategic interventions to prevent hypertension in the working population.

Synthesis and Biological Importance of 2-(thio)ureabenzothiazoles

The (thio)urea and benzothiazole (BT) derivatives have been shown to have a broad spectrum of biological activities. These groups, when bonded, result in the 2-(thio)ureabenzothizoles (TBT and UBT), which could favor the physicochemical and biological properties. UBTs and TBTs are compounds of great importance in medicinal chemistry. For instance, Frentizole is a UBT derivative used for the treatment of rheumatoid arthritis and systemic lupus erythematosus. The UBTs Bentaluron and Bethabenthiazuron are commercial fungicides used as wood preservatives and herbicides in winter corn crops. On these bases, we prepared this bibliography review, which covers chemical aspects of UBTs and TBTs as potential therapeutic agents as well as their studies on the mechanisms of a variety of pharmacological activities. This work covers synthetic methodologies from 1935 to nowadays, highlighting the most recent approaches to afford UBTs and TBTs with a variety of substituents as illustrated in 42 schemes and 13 figures and concluded with 187 references. In addition, this interesting review is designed on chemical reactions of 2-aminobenzothiazoles (2ABTs) with (thio)phosgenes, iso(thio)cyanates, 1,1′-(thio)carbonyldiimidazoles [(T)CDI]s, (thio)carbamoyl chlorides, and carbon disulfide. This topic will provide information of utility for medicinal chemists dedicated to the design and synthesis of this class of compounds to be tested with respect to their biological activities and be proposed as new pharmacophores.

Volatile organic compounds emission in the rubber products manufacturing processes

Volatile organic compounds (VOCs) emission from rubber products manufacture processes, mixing, shaping and vulcanization were investigated in four rubber products factories in China. The source emission air was passively sampled by pre-vacuumized stainless steel canister and analyzed by gas chromatography-mass spectrometry-flame ionization detection (GC/MS-FID). The species profile of 107 VOCs in the emission processes were obtained. We calculated the photochemical ozone formation potential (OFP) and carcinogenic risk (CR) of the VOCs for each manufacture process. The results showed that mixing process mainly released dichloromethane (14.53%), carbon disulfide (CS₂) (6.88%), styrene (5.72%), 4-methyl-2-pentanone (5.22%) and naphthalene (3.69%) for solvents used and raw rubber degradation in the process. The C6-C8 alkanes, especially heptane and isomers of heptane (44.71%), were dominated in shaping process. The major species released from vulcanization process were carbon disulfide (29.72%), naphthalene (8.17%), acetone (7.73%) and dichloromethane (4.26%). VOCs emitted from vulcanization process had the highest OFP, which contributed by naphthalene, m/p-xylene, o-xylene and carbon disulfide. VOCs emission from mixing process had the highest CR, and 1,2-dibromoethane, 1,2-dichlorethane and 1,3-butadiene were the main contributors to CR. We also estimated the total VOCs emissions into the atmosphere from tires manufacturing in China, which were 7.58 × 10⁵ t in 2018 and contributed about 9% of total industry processes VOCs emissions.

Molecular Simulation to Explore the Dissolution Behavior of Sulfur in Carbon Disulfide

Soluble sulfur (S₈) and insoluble sulfur (IS) have different application fields, and molecular dynamics simulation can reveal their differences in solubility in solvents. It is found that in the simulated carbon disulfide (CS₂) solvent, soluble sulfur in the form of clusters mainly promotes the dissolution of clusters through van der Waals interaction between solvent molecules (CS₂) and S₈, and the solubility gradually increases with the increase in temperature. However, the strong interaction between polymer chains of insoluble sulfur in the form of polymer hinders the diffusion of IS into CS₂ solvent, which is not conducive to high-temperature dissolution. The simulated solubility parameter shows that the solubility parameter of soluble sulfur is closer to that of the solvent, which is consistent with the above explanation that soluble sulfur is easy to dissolve.

[Study on determination of 2-thioxothiazolidine-4-carboxylic Acid in urine by high performance liquid chromatography]

Objective: To establish a high performance liquid chromatography method for the determination of 2-thioxothiazolidine-4-carboxylic acid (TTCA) in urine. Methods: After acidification with hydrochloric acid, TTCA in urine was first extracted by ethyl acetate with excessive sodium chloride, then gradient separated by a symmetry C18 column and then detected by a diode array detector. The quantification was based on a working curve of external standard method. Results: The linear relationship of TTCA in urine was good in the range of 0.03-10.00 mg/L, and the correlation coefficient was 0.9999. The detection limit and minimum quantitative concentration of TTCA in urine were 0.008 mg/L and 0.027 mg/L. The intra-assay precision of the method was 0.9%-1.4%, the inter-assay precision was 1.3%-3.5%, and the average recovery was 85.0%-92.7% while the concentrations of TTCA in urine was 0.8, 2.0 and 8.0 mg/L, respectively (n=6) . Conclusion: The gradient elution high performance liquid chromatography method has simple operation and high sensitivity, and it is suitable for the determination of TTCA on a low level in urine for occupational workers exposure to carbon disulfide.

Influence of dissolved organic matter on carbonyl sulfide and carbon disulfide formation from dimethyl sulfide during sunlight photolysis

Carbonyl sulfide (COS) and carbon disulfide (CS₂ ) are important atmospheric gases photochemically generated from organic sulfur precursors in sunlit natural waters. This study examined these processes by evaluating COS and CS₂ photoproduction from dimethyl sulfide (DMS) in the presence of dissolved organic matter (DOM). DOM was added because it photochemically produces various reactive intermediates (³ CDOM*, ^• OH, ¹ O₂ , and H₂ O₂ ) potentially involved in these reaction pathways. DMS-amended synthetic waters at pH 8 were varied in terms of their DOM type and concentration, spiked with the ³ CDOM* quenching agent, phenol, in certain cases, and subsequently irradiated over varying exposure times. Results indicated that various DOM types ranging from freshwater to open-ocean DOM increased COS but did not alter CS₂ , which remained at nondetect levels. DOM type influenced COS only at higher concentrations (20 mg/L), whereas increasing DOM concentrations proportionally increased COS concentrations for all DOM types. Phenol addition lowered COS formation for reasons that remained unclear because phenol likely quenched ³ CDOM* and DMS-derived sulfur-based radicals. Further comparisons with DMS-spiked natural waters and cysteine (CYS)-spiked synthetic and natural waters assessed previously indicated that COS formation from both precursors in natural waters was always greater than in waters containing DOM alone. PRACTITIONER POINTS: DMS- and DOM-spiked synthetic waters formed COS but did not form CS₂ during sunlight photolysis. In DMS-spiked synthetic solutions, DOM type has a limited influence on COS formation whereas DOM concentration has a stronger influence on COS formation. COS formation in the DMS-spiked synthetic waters was fairly proportional to the DOC concentration but was generally lower than COS formation in DMS-spiked natural waters.

Fabrication of Carbon Disulfide Added Colloidal Gold Colorimetric Sensor for the Rapid and On-Site Detection of Biogenic Amines

Meat is often wasted due to the perceived concerns of its shelf life and preservation. Specifically, in meat formation, biogenic amines (BAs) are the major agents to spoil them. Herein, we have developed a carbon disulfide (CS2) added colloidal gold nanoparticles-based colorimetric sensor for the rapid and on-site detection of biogenic amines. Transmission electron microscopy is used to observe the morphological changes in colloidal gold nanoparticles and aggregation behavior of CS2 added to the colloidal gold nanoparticles' solution. Raman spectroscopic analysis is further used to characterize the peaks of CS2, Cad and CS2-Cad molecules. Absorption spectroscopy is used to estimate the colorimetric differences and diffuse reflectance spectra of the samples. The sensing analysis is performed systematically in the presence and absence of CS2. CS2 added colloidal gold nanoparticles colorimetric sensor detected the BAs with a limit of detection (LOD) value of 50.00 µM. Furthermore, the developed sensor has shown an LOD of 50.00 µM for the detection of multiple BAs at a single time. The observed differences in the colorimetric and absorption signals indicate that the structure of BAs is converted to the dithiocarbamate (DTC)-BA molecule, due to the chemical reactions between the amine groups of BAs and CS2. Significantly, the developed colorimetric sensor offers distinct features such as facile fabrication approach, on-site sensing strategy, rapid analysis, visual detection, cost-effective, possibility of mass production, availability to detect multiple BAs at a single time and appreciable sensitivity. The developed sensor can be effectively used as a promising and alternative on-site tool for the estimation of BAs.

Surface characterization of metal oxides-supported activated carbon fiber catalysts for simultaneous catalytic hydrolysis of carbonyl sulfide and carbon disulfide

The sol-gel method was used to synthesize a series of metal oxides-supported activated carbon fiber (ACF) and the simultaneous catalytic hydrolysis activity of carbonyl sulfide (COS) and carbon disulfide (CS₂) at relatively low temperatures of 60°C was tested. The effects of preparation conditions on the catalyst properties were investigated, including the kinds and amount of metal oxides and calcination temperatures. The activity tests indicated that catalysts with 5 wt.% Ni after calcining at 400°C (Ni(5)/ACF(400)) had the best performance for the simultaneous catalytic hydrolysis of COS and CS₂. The surface and structure properties of prepared ACF were characterized by scanning electron microscope-energy disperse spectroscopy (SEM-EDS), Brunauer-Emmett-Teller (BET), X-ray diffraction (XRD), carbon dioxide-temperature programmed desorption (CO₂-TPD) and diffuse reflectance Fourier transform infrared reflection (DRFTIR). And the metal cation defects were researched by electron paramagnetic resonance (EPR) method. The characterization results showed that the supporting of Ni on the ACF made the ACF catalyst show alkaline and increased the specific surface area and the number of micropores, then improved catalytic hydrolysis activity. The DRFTIR results revealed that -OH species could facilitate the hydrolysis of COS and CS₂; -COO and -C-O species could facilitate the oxidation of catalytic hydrolysate H₂S. And the EPR results showed that high calcination temperature conditions provide more active reaction center for the COS and CS₂ adsorption.

Influence of dissolved organic matter on carbonyl sulfide and carbon disulfide formation from cysteine during sunlight photolysis

Carbonyl sulfide (COS) and carbon disulfide (CS2) are important atmospheric gases that are formed from organic sulfur precursors present in natural waters when exposed to sunlight. However, it remains unclear how specific water constituents, such as dissolved organic matter (DOM), affect COS and CS2 formation. To better understand the role of DOM, irradiation experiments were conducted in O2-free synthetic waters containing four different DOM isolates, acquired from freshwater to open ocean sources, and the sulfur-based amino acid, cysteine (CYS). CYS is a known natural precursor of COS and CS2. Results indicated that COS formation did not vary strongly with DOM type, although small impacts were observed on the kinetic patterns. COS formation also increased with increasing CYS concentration but decreased with increasing DOM concentration. Quenching experiments indicated that ˙OH was not involved in the rate-limiting step of COS formation, whereas excited triplet states of DOM (3CDOM*) were plausibly involved, although the quenching agents used to remove 3CDOM* may have reacted with the CYS-derived intermediates as well. CS2 was not formed under any of the experimental conditions. Overall, DOM-containing synthetic waters had a limited to no effect towards forming COS and CS2, especially when compared to the higher concentrations formed in sunlit natural waters, as examined previously. The reasons behind this limited effect need to be explored further but may be due to the additional water quality constituents present in these natural waters. The findings of this study imply that multiple variables beyond DOM govern COS and CS2 photoproduction when moving from freshwaters to open ocean waters.

A novel and green sulfur fertilizer from CS2 to promote reproductive growth of plants

Carbon disulfide (CS₂) is seen an odor-toxic organic sulfur compound, which presents a major impact on global climate change. Therefore, the conversion of CS₂ into valuable chemicals is the key to reduce the concentration of CS₂ in the atmosphere. On the basis of a CS₂ fixation strategy, CS₂-storage materials (CS₂SMs) are firstly synthesized by the reaction of CS₂ with a binary ion-like liquid systems of ethylenediamine (EDA) and ethylene glycol derivatives (EGs) under mild condition. In view of the serious shortage of sulfur fertilizer and its important position in global agricultural production, it is a promising choice to use the CS₂SMs as a new type of green sulfur fertilizer to promote the growth of eggplant, tomato, sweet pepper and cucumber. In this work, the influence of CS₂SMs on the growth of plants were studied by taking plants irrigated by using various aqueous CS₂SMs solutions as experimental groups, and those irrigated by using water and NH₄HCO₃ as control groups. The experimental results showed that all CS₂SMs could promote plant height, stem diameter, root weight, flower bud number and leaf size. Especially, several CS₂SMs presented significant influence on fluorescence and fruit number. Further studies showed that the CS₂SMs as new energy resources sulfur-containing boosted leaf area, improved root development, enhanced photosynthesis and soil nutrient uptake, and promoted vegetative and reproductive growth of these four types of plants. Thus, this work provided a new strategy for the use of CS₂ as an indirect energy source for the experimental four plants.

Indirect Photochemical Formation of Carbonyl Sulfide and Carbon Disulfide in Natural Waters: Role of Organic Sulfur Precursors, Water Quality Constituents, and Temperature

Carbonyl sulfide (COS) and carbon disulfide (CS₂) are volatile sulfur compounds that are critical precursors to sulfate aerosols, which enable climate cooling. COS and CS₂ stem from the indirect photolysis of organic sulfur precursors in natural waters, but currently the chemistry behind how this occurs remains unclear. This study evaluated how different organic sulfur precursors, water quality constituents, which can form important reactive intermediates (RIs), and temperature affected COS and CS₂ formation. Nine natural waters ranging in salinity were spiked with cysteine, cystine, dimethylsulfide (DMS), or methionine and exposed to simulated sunlight over varying times and water quality conditions. Results indicated that COS and CS₂ formation increased up to 11× and 4×, respectively, after 12 h of sunlight, while diurnal cycling exhibited varied effects. COS and CS₂ formation was also strongly affected by the DOC concentration, organic sulfur precursor type, O₂ concentration, and temperature, while salinity differences and CO addition did not play a significant role. Overall, important factors in forming COS and CS₂ were identified, which may ultimately impact their atmospheric concentrations.

[Determination of bromoform in the air of workplace by solvent desorption gas chromatography]

OBJECTIVE

To establish the method of solvent desorption gas chromatography for determination of bromoform in workplace air.

METHODS

Bromoform in the air was adsorbed by activated carbon tube sampling and solvent desorption using carbon disulfide, then analyed by GC with DB-FFAP capillary column.

RESULTS

The linear regression equation is y=1.22x-0.81 (r=0.999 9)between 0.57~300.00 μg/ml of target concentration in the air. The detection limit was 0.17 μg /ml. The relative standard deviations of the batch and inter batch were 1.7%~3.6%, 2.8%~6.3%, respectively. The sampling efficiency was 100%. The overall desorption efficiency was 95.0%. The breakthrough capacity was more than 0.61 mg(100 mg activated carbon).

CONCLUSION

The method is suitable to determine bromoform in the air of workplace.

Role of Endoplasmic reticulum apoptotic pathway in testicular Sertoli cells injury induced by Carbon disulfide

The exposure of Carbon disulfide (CS2) is associated with germ cell injury and male infertility in animals and humans. However, the molecular mechanism is currently unknown. This study show here that CS2-induced Sertoli cells injury via Endoplasmic reticulum (ER) apoptotic pathway. SD male rats were exposed to doses of CS2 (0, 50, 250, 1250mgm(-3)) for 4weeks. After treatment, loose structures of seminiferous tubules and disordered cell arrangements were observed by light microscopy. Ultrastructural lesions, deformed chromatins and vacuoles formed from swollen ER were observed by electron microscopy. After primary culture of Sertoli cells, a dose-dependent increased apoptosis were found. The increased activity of Caspase 3, accumulation of intracellular Ca(2+), up-regulation of mRNA and protein expressions of ER apoptotic relative molecules (Calpain 2, Cleaved-Caspase 12, GRP78 and CHOP) were also found in this study. Altogether, our findings indicated that ER apoptotic pathway played an important role in CS2-induced Sertoli cell impairment.

[Determination of n-pentanol in workplace air by solvent desorption gas chromatography]

OBJECTIVE

To develop a solvent desorption gas chromatographic method for determination of n-pentanol in the workplace air.

METHODS

n-Pentanol in the workplace air was collected with activated carbon tubes, desorbed with 2% 2-propanol in carbon disulfide, separated with a nitroterephthalic acid-modified FFAP capillary column, and detected with flame ionization detector.

RESULTS

The limit of detection was 0.2 mg/L; the lower limit of quantification was 0.6 mg/L; the linear range was 0.6-4072.0 mg/L. The minimum detectable mass concentration was 0.2 mg/m3 for 1.5 L of air sample. This method was highly repeatable. The relative standard deviations were 2.3%-5.4%. The average desorption efficiencies were 86.9%-94.2%. The absorption efficiencies were 100%. The breakthrough volume was above 8.0 mg in 100-mg activated carbon. The samples in activated carbon tubes could be stored for at least 14 days at room temperature.

CONCLUSION

The method is feasible for determination of n-pentanol in the workplace air.

[Determination of methyl propyl ketone in air of workplace by capillary gas chromatography]

OBJECTIVE

To establish a gas chromatography method for determination of methyl propyl ketone in the air of workplace.

METHODS

Methyl propyl ketone in the air of workplace was collected with activated carbon tubes and desorbed with carbon disulfide before sample loading. The target toxicant was separated with the capillary column and detected with a hydrogen flame ionization detector, identified by retention time, and quantified by peak area.

RESULTS

The linear range of methyl propyl ketone in the air of workplace was 202.5∼4 860.0 µg/ml, with a correlation coefficient of 0.999 98. The limit of detection was 1.5 µg/ml. The lower limit of quantification was 5.0 µg/ml. The minimum detectable concentration was 1.0 mg/m(3) under 1.5 L sampling volume and 1.0 ml desorption solution volume. The relative standard deviation of different methyl propyl ketone concentrations was 1.42%∼1.65%, and the recovery rate was 94.9%∼ 97.9%.

CONCLUSION

This method has high sensitivity, precision, and accuracy, and it is applicable for determination of methyl propyl ketone in the air of workplace.

Stability and flexibility of the message carried by semiochemical stimuli, as revealed by devaluation of carbon disulfide followed by social transmission of food preference

Semiochemicals are volatile compounds that communicate specific meaning between individuals and elicit specific behavioral and/or physiological responses mediated by highly sensitive and highly specific olfactory pathways. Recent work suggests that semiochemicals can activate multiple olfactory pathways at once, but the degree to which parallel pathways activated by the same semiochemical interact and what the behavioral consequences of such interactions are remains a topic of debate. Here, we approached this question behaviorally, investigating whether rats could be trained to avoid carbon disulfide (CS₂; conditional stimulus) via taste-potentiated odor aversion, and asking whether any such learning would have an impact on rats' subsequent use of CS₂ as a semiochemical cue (i.e., in a socially transmitted food preference paradigm). The results show that CS₂-mediated food preference learning is unimpaired by aversions conditioned to CS₂, a result indicating that canonical and semiochemical pathways for the processing of CS₂ function in a largely independent manner.

[Effect of pressure on electron-phonon coupling constants of all-trans-beta-carotene]

The present paper cited that R Tubino and other people introduced a kind of electron-phonon coupling constants with dimension, which can establish the relation with the Huang-Rhys factor and calculate the electron-phonon coupling constants of every C-C bond vibration mode. There are many reports about the visible absorption and Raman spectra of all-trans-beta-carotene with pressure. But the study about the Raman scattering cross section and the Huang-Rhys factor with pressure have not been reported now. Visible absorption and Raman spectra of all-trans-beta-carotene were measured in carbon disulfide in the pressure range from 0. 04 to 0. 60 GPa. The results indicated that the visible absorption spectra of beta-carotene in nonpolar solvent carbon disulfide are red-shifted with pressure increasing, but the frequency shifts towards higher frequencies in the Raman spectra, the Raman scattering cross section decreases, Huang-Rhys factor increases, and the electron-phonon coupling constants of CC bond vibration modes increase. The mechanism is that all-trans-beta-carotene caused by compression and a decrease in the structurally ordered properties of the molecules leads to narrow energy gap of the pi, shortens effective conjugation length, hinders delocalization of pi-electron, decreases the Raman scattering cross section, and increases the Huang-Rhys factor and the electron-phonon coupling constants.

[Effect of carbon disulfide on oxidation-antioxidation function of rat nerve tissues.]

OBJECTIVE

To investigate the effect of carbon disulfide (CS(2)) on oxidation-antioxidation function of rat nerve tissues.

METHODS

Thirty male Wistar rats were randomly divided into the control group, the low-dosage exposure group and the high-dosage group, 10 rats each. The rats of the two exposure groups were administered with CS(2) by gavage at a dosage of 300 or 500 mgxkg(-1)xd(-1), 5 times every week for continuous 12 weeks. The alterations in glutathione (GSH), malondialdehyde (MDA), reactive oxygen species (ROS), superoxide dismutase (SOD), glutathione peroxidase (GSH-Px), hydrogen peroxidase (CAT) and total anti-oxidation (T-AOC) in cerebrum, spinal cord, and sciatic nerve of CS(2)-treated animals were assayed.

RESULTS

The results showed that the contents of MDA and ROS in nerve tissues of CS(2)-treated groups increased significantly except ROS in spinal cord and sciatic nerve of low dose group. The content of MDA was increased by 20.7% and 33.6% respectively in the cerebrum of the rats of the low-dosage group and the high-dosage group, by 18.5% and 23.3% respectively in the spinal cord, and by 20.7% and 53.0% respectively in the sciatic nerve, The content of MOS was increased by 20.1% and 34.9% respectively in the cerebrum of the rats of the low-dosage group and the high-dosage group, and by 14.1% and 15.4% respectively in the spinal cord and the sciatic nerve of the rats of the high-dosage group (P < 0.05 or P < 0.01). Furthermore, the activities of SOD, GSH-Px, CAT and T-AOC decreased significantly except GSH-Px and SOD in cerebrum of low dose group. The content of GSH was decreased by 17.2% and 26.5% respectively in the cerebrum of the rats of the low-dosage group and the high-dosage group, by 26.4% and 31.2% respectively in the spinal cord, and by 15.1% and 20.0% respectively in the sciatic nerve. The content of T-AOC was decreased by 11.1 and 26.4% respectively in the cerebrum of the rats of the low-dosage group and the high-dosage group, by 15.1% and 38.4% respectively in the spinal cord, and by 35.6% and 42.3% respectively in the sciatic nerve. The activity of SOD was decreased by 12.1% and 25.4% respectively in the spinal cord of the rats of the low-dosage group and the high-dosage group and by 16.4% and 30.3% respectively in the sciatic nerve. The activity of GSH-Px was decreased by 17.3% and 32.5% respectively in the spinal cord of the rats of the low-dosage group and the high-dosage group and by 17.1% and 21.5% respectively in the sciatic nerve. The activity of GSH-Px and SOD was decreased by 12.6% and 30.1% respectively in the cerebrum of the rats of the high-dosage group. The activity of CAT was decreased by 17.5% and 39.4% respectively in the cerebrum of the rats of the low-dosage group and the high-dosage group, by 25.2% and 31.3% respectively in the spinal cord, and by 17.1% and 36.9% respectively in the sciatic nerve (P < 0.05 or P < 0.01).

CONCLUSION

Subchronic exposure to CS(2) can induce significant changes of oxidation-antioxidation function in rat nerve tissues, which might be related to CS(2)-induced neurotoxicity.

Role of various parameters in synthesis of insoluble agrobased xanthates for removal of copper from wastewater

The research identifies and studies the parameters involved in the synthesis of two types of insoluble agrobased xanthates, named insoluble baggase xanthate (IBX) and insoluble wood xanthate (IWX) and their ability to remove heavy metals from wastewater. Copper was selected as the model metal and the metal removal capacity of IBX and IWX were expressed by copper loading (mg of copper removed/g of IBX or IWX). It was observed that contact times of 3 h and alkali strengths of 4 mol/L were necessary during alkalization. The maximum base material to alkali ratio (w/w) was 1.125 without sacrificing proper mixing of the base material alkali mixture. Optimum contact time during xanthation was 4h with a carbon-disulfide to base material ratio (w/w) of 1.25. Only strong bases like NaOH, KOH contributed high copper loadings and the starting liquor was reused twice without sacrificing the copper removal capacity of IBX and IWX. Maximum copper loadings achieved with IBX and IWX were 26.9+/-0.15 and 27.8+/-0.39 mg/g, respectively.

Removal of hexavalent chromium using a novel cross linked xanthated chitosan

Suitability of a novel cross linked, chemically modified chitosan as highly efficient adsorbent for the recovery of toxic chromium(VI) was studied. After cross linking with glutaraldehyde, xanthate group was grafted onto the back bone of chitosan. Sorption was found to be both pH and concentration dependent, with pH 3 being the optimum value. Both, chemically modified beads (CMCB) and flakes (CMCF) followed a pseudo-second-order kinetics with a rate constant of 2.037 and 4.639 g/mg/min, respectively. The equilibrium data followed the Langmuir isotherm model with maximum capacities of 625 mg/g and 256.4 mg/g and for CMCF and CMCB respectively. Desorption studies revealed the reusability of the sorbent for at least 10 cycles without any significant change in adsorption capacities.

[Study on visible chemiluminescence from reaction of microwave discharge of CF4/Ar with carbon disulfide]

Using crossed molecular beam-chemiluminescence apparatus, visible chemiluminescence in the region of 300-900 nm was measured from the gas-phase reaction of microwave discharge of CF4 diluted in Ar with carbon disulfide at various pressures. The geometries and frequencies of possible reaction products were respectively investigated at the B3LYP/6-311 + + G (3df, 2pd) and MP2/6-311 + G(d, p) levels. Chemiluminescence spectrum was assigned to emission spectrum of the electronically excited states of F2S2. From the analysis of spectrum and reaction mechanism, it is proposed that carbon disulfur was dissociated by metastable Ar generated from microwave discharge. The electronically excited state of F2S2 was obtained from multistage reactions of the dissociative products with atoms F generated from microwave discharge.

Elevated triglyceride and decreased high density lipoprotein level in carbon disulfide workers in Taiwan

Carbon disulfide (CS2) is a man-made product utilized primarily in the manufacture of viscose rayon. Overexposure to CS2 has been associated with an increase in coronary heart disease. The aims of this study were to examine the dose-response relationship of CS2 exposure and elevated lipid profile tests among CS2-exposed workers in Taiwan. A total of 132 workers were recruited from two viscose rayon plants. Air sampling was performed to determine the CS2 exposure of workers. Demographic data and work history were gathered by a standard self-administered questionnaire. Lipid profile tests were also performed by routine methods. The average CS2 exposure concentration was 50.6 +/- 25.6 ppm (range: 24-127 ppm) in the high-exposure group, 12.9 +/- 5 ppm (range: 5.2-22.3 ppm) in the mid-exposure group, and 3.5 +/- 1.2 ppm (range 0.97-5.2 ppm) in the low-exposure group. There were 21 out of 33 (63.7%) elevated triglyceride levels among high-CS2-exposure workers, 27 out of 64 (42.2%) among the middle-CS2-exposure, and 14 out of 35 (40%) among low-CS2-exposure workers, respectively. Compared to the low-CS2-exposure workers, the age- and weight-adjusted odds ratios (and 95% confidence intervals) of the prevalence of elevated triglyceride value were 1.12 (0.5, 2.7) for middle-CS2-exposure workers, and 2.81 (1.02, 7.8) for high-CS2-exposure workers. There was a significant linear trend between CS2 exposure and the prevalence of elevated triglyceride value (P = 0.046) after adjusting for other factors. There was also a lower prevalence of elevated HDL level in high-CS2-exposure workers than low-CS2-exposure workers (15.2% versus 31.4%). Compared to the low-CS2-exposure workers, the age- and weight-adjusted odds ratio (and 95% confidence intervals) of elevated HDL level were 0.34 (0.1, 1.18) for high-CS2-exposure workers, which was borderline significant. In conclusion, this study suggests that elevated triglyceride level and decreased HDL level are associated with CS2 exposure. The study also suggests that exposure to CS2 (concentration > 23.2 ppm, which was above the current TLV-TWA of 10 ppm) are significantly associated with increased risk and decreased protective effect for coronary heart disease.

[A gas chromatographic method to decrease the detection limit of trace benzene in CS2 extract]

A method to decrease the detection limit of trace benzene in CS2 extract from coastal water by gas chromatography has been studied. A direct injection port (Shimadzu WBI-17) and a 2 m x 2 mm i.d. column packed with Chromosorb W(AW-DMCS) coated with 10% SE-30 was used. It is simpler and has low detection limit, small sample amount and high repeatability. The experiment showed that the trace water in the organic phase and the too small purge flow of the direct injection port could cause serious tailing of CS2 peak. There was an optimum value of the purge flow (purge flow/total flow = 5%). The minimum detectable limit of benzene was 4 micrograms/L. The repeatability (RSD) was better than 6% and the average recovery was 96.7%.

Determination of benzene, toluene, ethylbenzene and xylenes in indoor air at environmental levels using diffusive samplers in combination with headspace solid-phase microextraction and high-resolution gas chromatography-flame ionization detection

An improved analytical method for passive air sampling is presented based on a combination of commercially available diffusive samplers with headspace solid-phase microextraction and high-resolution gas chromatography with flame ionization detection (HRGC-FID). This procedure is targeted for short-term BTEX (benzene, toluene, ethylbenzene and o-, m- and p-xylenes) determinations at environmental concentrations and can be applied for sampling intervals between 30 min and 24 h. The analytes are adsorbed onto the charcoal pad of a passive sampler and then extracted with carbon disulphide-methanol. After removal of the carbon disulphide by xanthation, the BTEXs are enriched on a Carboxen SPME fiber, thermally desorbed and analysed by HRGC-FID. Detection limits for a sampling interval of 2 h are between 0.4 and 2 micrograms/m3, within-series precision ranges between 6.6 and 12.8%, day-to-day precision is between 11.1 and 15.2%. The results obtained with this procedure are validated by comparison with active sampling. Detection limits and a further reduction of the sampling time are limited by blanks of the chemicals and the diffusive samplers. Procedures to eliminate these blanks are described in detail. Applications such as the determination of BTEXs in indoor air inside buildings, inside a train and a car are presented, indicating the usefulness of the described procedure for short-term measurements of environmental BTEX concentrations. An advantage of passive samplers is the storage stability for at least six months, which is essential for its use in large epidemiological studies.

Biological monitoring of workers exposed to carbon disulfide (CS2) in a viscose rayon fibers factory

The exposure-excretion relationship to carbon disulfide (CS2) vapor in 407 exposed workers was studied during the second half of the working week. Carbon disulfide concentrations were also determined in 50 nonexposed subjects. The geometric mean value for CS2 in urine samples from the latter was: 0.23 microgram/l (95% upper limit = 0.52 microgram/l) when log-normal distribution was assumed. Among the exposed workers, the CS2 level in urine samples collected after the first half shift exceeded the 95% upper limit of nonexposed subjects in every case. The time-weighted average intensity of exposure to CS2 vapor was measured using personal diffusive samplers (in which carbon cloth served as an adsorbent). CS2 concentrations in urine were determined in samples collected at the end of the first half shift from the 407 exposed cases as well as from 50 nonexposed controls. There was a significant correlation (p < 0.0001) between the exposure to CS2 vapor at concentrations of up to 64 mg/m3 and the levels of CS2 measured in the urine samples after four hours of exposure. The correlation indicated that a mean level of 15.5 micrograms CS2/l urine (95% confidence range, 13.8-17.1 micrograms/l) was excreted following an exposure to CS2 at 31 mg/m3 (the current occupational exposure limit).

Sulfur-binding protein of flagella of Thiobacillus ferrooxidans

The sulfur-binding protein of Thiobacillus ferrooxidans ATCC 23270 was investigated. The protein composition of the bacterium's cell surface changed according to the culture substrate. Sulfur-grown cells showed greater adhesion to sulfur than iron-grown cells. The sulfur-grown cells synthesized a 40-kDa surface protein which was not synthesized by iron-grown cells. The 40-kDa protein had thiol groups and strongly adhered to elemental sulfur powder. This adhesion was not disturbed by Triton X-100, which can quench hydrophobic interactions. However, adhesion was disturbed by 2-mercaptoethanol, which broke the disulfide bond. The thiol groups of the 40-kDa protein formed a disulfide bond with elemental sulfur and mediated the strong adhesion between T. ferrooxidans cells and elemental sulfur. The 40-kDa protein was located on the flagella. The location of the protein would make it possible for cells to be in closer contact with the surface of elemental sulfur powder.

The major carotenoid pigment of a psychrotrophic Micrococcus roseus strain: fluorescence properties of the pigment and its binding to membranes

The fluorescence excitation and emission spectra are reported for P-3 (bis-dehydro-B-carotene-2-carboxylic acid), the major carotenoid pigment of psychrotrophic M. roseus. The excitation spectrum and the absorption spectrum showed good agreement with respect to the position of their peak maxima. The study also demonstrates that P-3 binds to liposomes prepared from synthetic lipids (PC, DOPG, or CL) or the total lipids of a mutant colourless M. roseus. Binding of P-3 to the membranes was accompanied by a decrease in the fluorescence emission intensity and a blue shift in lambda(em) maximum by 15 to 20 nm. The quantum yield of P-3 was observed to be low (1.7 x 10(-5)).

Quenched molecular reorientation and angular velocity in nanopores

A theoretical treatment shows how the orientational dependent and spin rotation relaxation rates of a confined nonpolar liquid depend on the average pore size. Experimental nuclear relaxation data on carbon disulfide and cyclohexane in a set of calibrated porous glasses support the theory.

Condensation products of 2-amino-3-cyano-4,6-disubstituted pyridine with carbon disulfide, thiourea, urea & formamide and their antibacterial activity

Some new 5,7-disubstituted pyrido[2,3-d]pyrimidine derivatives have been synthesized by the condensation of 2-amino-3-cyano-4,6-disubstituted pyridine with carbon disulfide, thiourea, urea and formamide. The structure of these products are supported by their IR and 1H-NMR spectra as well as by elemental analysis. The compounds have been tested for their antibacterial activity against E. coli and S. aureus.

Evaluation of the Fourier transform infrared (FTIR) spectrophotometer for analysis of trichloroethylene (TCE) in the presence of Freon-113 in carbon disulfide eluates of charcoal air sampling tubes

Results obtained using Fourier transform infrared spectrophotometry (FTIR) for the analysis of samples of carbon disulfide (CS2) eluates containing trichloroethylene (TCE) and Freon from charcoal air sampling tubes were evaluated by comparison with results obtained when using gas chromatography (GC). The FTIR yielded accurate results without regard to the presence of Freon.

Monitoring and confirming primary alkylamines via a simple derivatisation procedure

Carbon disulphide reacts readily with primary alkylamines to yield dithiocarbamates. When injected into the heated injection port of a gas chromatograph, the dithiocarbamates yield the corresponding isothiocyanates. This reaction provides a simple and elegant derivatisation for quantifying, and also confirming the identify of, the primary alkylamines.

Carbon disulfide modification and impaired catabolism of low density lipoprotein

Carbon disulfide interacts in vitro with low density lipoprotein (LDL), resulting in an increased electrophoretic mobility of the particle, due to a decrease in free amino groups of apolipoprotein B-100. The processing of carbon disulfide-modified LDL through the apo B/E receptor pathway of cultured human fibroblasts is decreased as compared to that of native LDL, depending on the level of modification. Carbon disulfide-modified LDL is recognized and degraded by the scavenger pathway of macrophages, but to a lesser extent than acetylated LDL. Carbon disulfide modification decreases the ability of the LDL to down-regulate sterol synthesis and to stimulate cholesterol esterification in fibroblasts. Carbon disulfide-modified LDL markedly stimulates cholesteryl ester formation in macrophages, albeit to a lesser extent than acetylated LDL. These results indicate that after carbon disulfide modification the LDL catabolism is shifted to the scavenger pathway, and are consistent with the fact that carbon disulfide intoxication accelerates the appearance of atherosclerotic lesions.

Determination of beta-phenylethylamine as its isothiocyanate derivative in biological samples by gas chromatography mass spectrometry

A detailed procedure of a gas chromatographic mass spectrometric assay for beta-phenylethylamine in biological samples, after its reaction with carbon disulphide to form the isothiocyanate derivative, is presented. Our method has advantages over the previous methods with the pentafluoropropionic derivative of beta-phenylethylamine in that the isothiocyanate derivative of beta-phenylethylamine is much more stable than the pentafluoropropionic derivative and that the background in selected ion monitoring is very low. Using the present method, the levels of beta-phenylethylamine in human urine, untreated and pargyline-treated rat brain were found to be 15.3 micrograms 24 h-1, 1.4 and 160 ng g-1 wet weight, respectively.

The introduction of specific sites for heavy metal binding in a crystalline protein

Heavy metal derivatives of the galactose binding protein of Salmonella typhimurium were obtained by the treatment of crystals with carbon disulfide under anaerobic conditions, followed by exposure to mercury-containing reagents. Carbon disulfide reacts with protein amino groups to give a metastable dithiocarbamate, which is susceptible to covalent derivatization by mercurials. The number of amino groups which react for any particular crystalline protein will depend on the pH, the composition of the crystal mother liquor, and the steric accessibility limitations imposed by crystal packing. Direct reaction with protein crystals, rather than solution derivatization followed by purification and subsequent crystallization, is used to promote isomorphism of the derivative crystal with the native and to limit the number of available sites. For the S. typhimurium galactose binding protein, carbon disulfide treatment, followed by reaction with 2-chloromercuri-4-nitrophenol, resulted in binding at two sites at pH 8.0. Similar treatment with dimercury acetate gave one binding site for the dimercurial at the same pH. Both derivatives were isomorphous with the native crystal to a resolution of at least 3.5 A. These heavy atom derivatives have been used to produce an interpretable electron density map of the protein at 3-A resolution.

Dithiocarbamylation in histochemistry: carbon disulfide as a reagent for the visualization of primary amino groups with the light and electron microscope

Tissue amino groups undergo dithiocarbamylation on treatment (12 hr, 22-25 degrees C) with a carbon disulfide:triethylamine:tetrahydrofuran (1:1:0.5, v/v) mixture. After washing with tetrahydrofuran:triethylamine (4:1, v/v) followed by tetrahydrofuran:pyridine (4:1,v/v) and ice-cold distilled water tissues were immersed into ice-cold 10% (w/v) lead acetate to yield yellowish lead dithiocarbamates. At 22-25 degrees C the derivatives obtained from primary amines decompose to lead sulfide. After washing with 5% lead acetate in 10% acetic acid followed by three changes of distilled water tissues are dehydrated and embedded in paraffin or Maraglas as usual. In proteins the reaction is given by the epsilon-amino group of lysine and alpha-terminal amino groups, while nucleic acids do not react. Results are shown in tetrahydrofuran-delipidized ethanol or formalin-fixed 1) plant root tips where brown-colored and electron-dense lead sulfide deposits are localized in condensed chromatin and chromosomes attributable to lysine-rich histones and 2) rat skeletal muscle where an interfibrillar component is visualized in a repeating pattern, possibly related to terminal regions of the sarcoplasmic reticulum.

Recovery of acrylonitrile from charcoal tubes at low levels

Data are presented for the recovery of acrylonitrile from charcoal tubes at levels lower than those tested in NIOSH Method S156. A 2% by volume acetone in CS2 solution is used as desorbing solvent. An injection volume of 2 muL and a 3-m long by 3.2-mm o.d. (10-ft x 1/8-in) stainless steel column filled with 20% SP-1000 on 80/100 Supelcoport gives adequate resolution of the acrylonitrile. Results indicate that recoveries are adequate for sample sizes which correspond to a 15-liter sample at 0.5 and 0.25 ppm, and that acrylonitrile collected on carbon in the absence of inhibitor is stable for at least a week.

A sampling and analytical method for vinylidene chloride in air

A sampling and analytical method for the determination of vinylidene chloride in air is presented. Vinylidene chloride can be quantitatively trapped on charcoal over a wide range of concentrations. The collected vapors are desorbed with carbon disulfide and analyzed by gas chromatography utilizing a flame ionization detector. The analytical column is packed with Durapak OPN. The lower limit for the method is approximately 7 micrograms of vinylidene chloride per sampling tube. The breakthrough volume was found to be dependent upon the concentration sampled and the relative humidity of the air sampled. The overall precision of the analytical method is 5% (relative standard deviation).

A new method for monitoring personal exposure to ethylene oxide in the occupational environment

A novel method for monitoring occupational exposure to ethylene oxide was developed. Ethylene oxide was collected on Columbia JXC activated carbon, desorbed with carbon disulfide, and analyzed by gas chromatography using a TERGITOL TMN or UCON LB55OX column. Several parameters such as selection of adsorbent and column; effects of humidity, sampling rate and volume; shelf-life; interference from ten contaminants; desorption technique and calibration curve were investigated. The lower detection limit of the method is 0.15 ppm in ten liters of air. The method was evaluated statistically and by conducting a round-robin interlaboratory study.

[Photoluminescence of singlet oxygen in solutions of chlorophylls and pheophytins]

With the use of mechanical phosphoroscopes the photoinduced luminescence of singlet oxygen (1270 nm) have been found in air saturated solutions of chlorophyll a, bacteriochlorophyll a, protochlorophyll and pheophytins in CCl4, CS2, and freon 112. The excitation spectra of the luminescence coincide with the absorption spectra of the pigments. The relative quantum yields of the luminescence are determined, the data are used for calculation the probablities of intersystem crossing in pigment molecules. All the pigments are shown to quench 1O2, the rate constants of the quenching are measured. The quenching efficiency of the chlorophylls increases with reduction of the semiisolated double bonds, reduction of these bonds in molecules of the pheophytins decreases the constants of the quenching.

[Haemangiosarcomatosis after professional exposure to polyvinylchloride (author's transl)]

After taking a cursory look at neoplastic developments particularly at professional exposure to vinylchloride and polyvinylchloride, one case is reported in which a multilocular haemangiosarcomatosis occurred after a relatively short and only intermittent exposure to polyvinylchloride. The latent stage lasted 15 years. The vessel areas affected were the aorta abdominalis, the intrarenal kidney vessels, and the intracerebral vessel-systems. Symptomatically, the disease presented the picture of a progrediently advancing peripheral circulatory disturbance. The possibility of previous sclerotic damage caused by carbon sulphide is discussed.