Water-Assisted Concerted Proton-Electron Transfer at Co(II)-Aquo Sites in Polyoxotungstates With Photogenerated RuIII (bpy)33+ Oxidant

The cobalt substituted polyoxotungstate [Co6 (H2 O)2 (α-B-PW9 O34 )2 (PW6 O26 )]17- (Co6) displays fast electron transfer (ET) kinetics to photogenerated RuIII (bpy)33+ , 4 to 5 orders of magnitude faster than the corresponding ET observed for cobalt oxide nanoparticles. Mechanistic evidence has been acquired indicating that: (i) the one-electron oxidation of Co6 involves Co(II) aquo or Co(II) hydroxo groups (abbreviated as Co6(II)-OH2 and Co6(II)-OH, respectively, whose speciation in aqueous solution is associated to a pKa of 7.6), and generates a Co(III)-OH moiety (Co6(III)-OH), as proven by transient absorption spectroscopy; (ii) at pH>pKa , the Co6(II)-OH→RuIII (bpy)33+ ET occurs via bimolecular kinetics, with a rate constant k close to the diffusion limit and dependent on the ionic strength of the medium, consistent with reaction between charged species; (iii) at pH Collapse

Key Words

• Co-aquo moiety
• cobalt polyoxometalate
• flash photolysis
• hydrogen bonding
• proton coupled electron transfer

Collapse

MESH Headings

• Cobalt/chemistry
• Coordination Complexes/chemical synthesis
• Coordination Complexes/chemistry
• Electrons
• Kinetics
• Light
• Organometallic Compounds/chemistry
• Organometallic Compounds/radiation effects
• Oxidants/chemistry
• Oxidants/radiation effects
• Oxidation-Reduction
• Polymers/chemical synthesis
• Polymers/chemistry
• Protons
• Ruthenium/chemistry
• Ruthenium/radiation effects
• Tungsten Compounds/chemical synthesis
• Tungsten Compounds/chemistry
• Water/chemistry

Collapse

Grants

• Fondazione Cariparo
• 10BIRD2018-UNIPD Department of Chemical Sciences at University of Padova
• 2017PBXPN4 Department of Chemical Sciences at University of Padova
• FAR 2020 University of Ferrara
• Fondazione Cariparo
• University of Ferrara

Collapse

Oxidation of ofloxacin by Oxone/Co(2+): identification of reaction products and pathways

Oxidative degradation of ofloxacin (OFX) by sulfate free radicals (SO4 (-•)) in the UV/Oxone/Co(2+)oxidation process was investigated for the first time, with a special focus upon identifying the transformation products as well as understanding the reaction pathways. Thirteen main compounds were identified after the initial transformation of OFX; the detailed structural information of which were characterized by high-performance liquid chromatography-high resolution mass spectrometry and MS fragmentation analysis. The degradation pathways mainly encompassed ring openings at both the piperazinyl substituent and the quinolone moiety, indicating that the usage of SO4 (-•) aided the oxidative degradation of OFX to undergo more facile routes compared to those in previous reports by using OH(•)/h(+) as the oxidant, where the initial transformation attacks were mainly confined to the piperazine moiety. Moreover, in this study, smart control over the pH conditions of the oxidation system via different modes of Oxone dosage resulted in the selective degradation of the functional sites of OFX molecule, where it was shown that the SO4 (-•)-driven destruction of the quinolone moiety of OFX molecule favored the neutral pH conditions. This would be beneficial for the reduction of bacterial resistance against quinolones in the aqueous environment.

Heterogeneous fenton degradation of azo dyes catalyzed by modified polyacrylonitrile fiber fe complexes: QSPR (quantitative structure peorperty relationship) study

The amidoximated polyacrylonitrile (PAN) fiber Fe complexes were prepared and used as the heterogeneous Fenton catalysts for the degradation of 28 anionic water soluble azo dyes in water under visible irradiation. The multiple linear regression (MLR) method was employed to develop the quantitative structure property relationship (QSPR) model equations for the decoloration and mineralization of azo dyes. Moreover, the predictive ability of the QSPR model equations was assessed using Leave-one-out (LOO) and cross-validation (CV) methods. Additionally, the effect of Fe content of catalyst and the sodium chloride in water on QSPR model equations were also investigated. The results indicated that the heterogeneous photo-Fenton degradation of the azo dyes with different structures was conducted in the presence of the amidoximated PAN fiber Fe complex. The QSPR model equations for the dye decoloration and mineralization were successfully developed using MLR technique. MW/S (molecular weight divided by the number of sulphonate groups) and NN=N (the number of azo linkage) are considered as the most important determining factor for the dye degradation and mineralization, and there is a significant negative correlation between MW/S or NN=N and degradation percentage or total organic carbon (TOC) removal. Moreover, LOO and CV analysis suggested that the obtained QSPR model equations have the better prediction ability. The variation in Fe content of catalyst and the addition of sodium chloride did not alter the nature of the QSPR model equations.

Degradation kinetics and mechanism of trace nitrobenzene by granular activated carbon enhanced microwave/hydrogen peroxide system

The kinetics of the degradation of trace nitrobenzene (NB) by a granular activated carbon (GAC) enhanced microwave (MW)/hydrogen peroxide (H202) system was studied. Effects of pH, NB initial concentration and tert-butyl alcohol on the removal efficiency were examined. It was found that the reaction rate fits well to first-order reaction kinetics in the MW/GAC/H202 process. Moreover, GAC greatly enhanced the degradation rate of NB in water. Under a given condition (MW power 300 W, H202 dosage 10 mg/L, pH 6.85 and temperature (60 +/- 5)degrees C), the degradation rate of NB was 0.05214 min-1when 4 g/L GAC was added. In general, alkaline pH was better for NB degradation; however, the optimum pH was 8.0 in the tested pH value range of 4.0-12.0. At H202 dosage of 10 mg/L and GAC dosage of 4 g/L, the removal of NB was decreased with increasing initial concentrations of NB, indicating that a low initial concentration was beneficial for the degradation of NB. These results indicated that the MW/GAC/H202 process was effective for trace NB degradation in water. Gas chromatography-mass spectrometry analysis indicated that a hydroxyl radical addition reaction and dehydrogenation reaction enhanced NB degradation.

Influence of the quantity of coloring agent in bleaching gels activated with LED/laser appliances on bleaching efficiency

The aim of this study was to assess the influence of the quantity of coloring agent on the bleaching efficiency of gels containing 35% H2O2. Sixty human third molars were sectioned mesiodistally, darkened in a coffee solution and sectioned in the occlusal-cervical direction, resulting in mesial (not bleached) and distal halves (bleached). They were distributed into three groups: Whiteness HP, Total Bleach, and Whiteform Perox Red Gel; and subdivided into four sub-groups: no coloring agent, manufacturer's standard, double the standard, and triple the standard. The gels were activated with light-ermitting diode/laser appliances. The images were analyzed with the Adobe Photoshop program (deltaEL*a*b*). The variation was submitted to the ANOVA test (two factors: type of gel and quantity of coloring agent) and Tukey test. Differences were observed for the quantity of coloring agent. The mean (+/-SD) was determined for each quantity of coloring used: no coloring agent -6.85 (+/-2.26)a, manufacturer's standard -794 (+/-2.55)ab, double the standard -8.65 (+/-2.47)b, triple the standard -9.05 (+/-2.72)b. In conclusion, the standard quantity of coloring agent did not provide significantly more intense bleaching than when it was completely absent. The use of double and triple the amount provided greater bleaching than that observed for the gel without coloring agent. No significant differences were observed between the tested gels.

Penetration of 35% hydrogen peroxide into the pulp chamber in bovine teeth after LED or Nd:YAG laser activation

This aim of the present study was to evaluate the pulp chamber penetration of 35% hydrogen peroxide activated by LED (light-emitting diode) or Nd:YAG laser in bovine teeth, after an in-office bleaching technique. Forty-eight bovine lateral incisors were divided into four groups, acetate buffer was placed into the pulp chamber and bleaching agent was applied as follows: for group A (n = 12), activation was performed by LED; for group B (n = 12), activation was performed by Nd:YAG laser (60 mJ, 20 Hz); group C (n = 12) received no light or laser activation; and the control group (n = 12) received no bleaching gel application or light or laser activation. The acetate buffer solution was transferred to a glass tube and Leuco Crystal Violet and horseradish peroxidase were added, producing a blue solution. The optical density of this solution was determined spectrophotometrically and converted into microgram equivalents of hydrogen peroxide. The results were analysed using ANOVA and Tukey's test (5%). It was verified that the effect of activation was significant, as groups activated by LED or laser presented greater hydrogen peroxide penetration into the pulp chamber (0.499 +/- 0.622 microg) compared with groups that were not (0.198 +/- 0.218 microg). There was no statistically significant difference in the penetration of hydrogen peroxide into the pulp chamber between the two types of activation (LED or laser). The results suggest that activation by laser or LED caused an increase in hydrogen peroxide penetration into the pulp chamber.

In vitro assessment of pulp chamber temperature of different teeth submitted to dental bleaching associated with LED/laser and halogen lamp appliances

This study sought to assess the pulp chamber temperature in different groups of human teeth that had been bleached using hydrogen peroxide gel activated with halogen lamps or hybrid LED/laser appliances. Four groups of ten teeth (maxillary central incisors, mandibular incisors, mandibular canines, and maxillary canines) were used. A digital thermometer with a K-type thermocouple was placed inside pulp chambers that had been filled with thermal paste. A 35% hydrogen peroxide-based red bleaching gel was applied to all teeth and photocured for a total of three minutes and 20 seconds (five activations of 40 seconds each), using light from an LED/laser device and a halogen lamp. The temperatures were gauged every 40 seconds and the data were analyzed by three-way ANOVA, followed by Tukey's test. Regardless of the light source, statistically significant differences were observed between the groups of teeth. The mean temperature values (+/- SD) were highest for maxillary central incisors and lowest for mandibular canines. The halogen lamp appliance produced more pulp chamber heating than the LED/laser appliance. The increase in irradiation time led to a significant increase in temperature.

Ultrasonically initiated emulsion polymerization of styrene in the presence of Fe2+

Ultrasonically initiated emulsion polymerization of styrene was carried out in the presence of Fe(2+). The addition of a small amount of Fe(2+) markedly enhanced the polymerization rate of styrene. In the presence of 50 microM Fe(2+), the conversion of monomer in the reaction time of 60 min was 2.4 times as high as that in the absence of Fe(2+). The increase in the polymerization rate was due to higher concentration of hydroxyl (*OH) radicals generated via Fenton reaction of Fe(2+) with hydrogen peroxide (H(2)O(2)), which was proved by a lower amount of H(2)O(2) in Fe(2+) aqueous solution compared with that in pure water during ultrasonic irradiation. However, the addition of excessive Fe(2+) had no further accelerating effect on the polymerization rate due to the reduction of *OH radicals by Fe(2+). So it is an effective way to add an appropriate amount of Fe(2+) to accelerate ultrasonically initiated emulsion polymerization of styrene.

Total antioxidant capacity, total oxidant status and oxidative stress index in the men exposed to 1.5 T static magnetic field

The aim of this study was to investigate the effects of a high-strength magnetic field produced by a magnetic resonance imaging (MRI) apparatus on oxidative stress. The effects of a 1.5 T static magnetic field on the total antioxidant capacity (TAC), total oxidant status (TOS) and oxidative stress index (OSI) in male subjects were investigated. In this study, 33 male volunteers were exposed to a 1.5 T static magnetic field for a short time and the TAC, TOS and OSI of each subject were determined. Magnetic field exposure was provided using a magnetic resonance apparatus; radiofrequency was not applied. Blood samples were taken from subjects and TAC, TOS and OSI values were measured using the methods of Erel. TAC showed a significant increase in post-exposures compared to pre-exposures to the magnetic field (p < 0.05). OSI and TOS showed a significant decrease in post-exposures compared to pre-exposures to a 1.5 T magnetic field (for each of two, p < 0.01). The 1.5 T static magnetic field used in the MRI apparatus did not yield a negative effect; on the contrary, it produced the positive effect of decreasing oxidative stress in men following short-term exposure.

Effect of light energy on peroxide tooth bleaching

BACKGROUND

Light-activated bleaching is a method of tooth whitening. The authors conducted a study to compare the whitening effects and tooth temperature changes induced by various combinations of peroxide bleaches and light sources.

METHODS

The authors randomly assigned 250 extracted human teeth halves into experimental groups (n = 10). A placebo gel (control), a 35 percent hydrogen peroxide or a 10 percent carbamide peroxide bleach was placed on the tooth surface and was irradiated with no light (control); a halogen curing light; an infrared, or IR, light; an argon laser; or a carbon dioxide, or CO2, laser. Color changes were evaluated immediately, one day and one week after treatment using a value-oriented shade guide and an electronic dental color analyzer. The outer enamel and inner dentin surface temperatures were monitored before and immediately after each 30-second application of light using a thermocouple thermometer.

RESULTS

Color and temperature changes were significantly affected by an interaction of the bleach and light variables. The application of lights significantly improved the whitening efficacy of some bleach materials, but it caused significant temperature increases in the outer and inner tooth surfaces. The IR and CO2 laser lights caused the highest tooth temperature increases.

CONCLUSIONS

Dentists performing an in-office bleaching technique with the use of an additional light source to accelerate tooth whitening should consider the specific bleaching agent being used, as well as the potential risks of heating teeth.

CLINICAL IMPLICATIONS

A specific combination of bleach and light that demonstrates good color change and little temperature rise should be selected for in-office tooth bleaching.

In-office vital tooth bleaching--what do lights add?

Aqueous hydrogen peroxide (H2O2) has been used clinically at 30% to 35% levels to lighten teeth for many years, but the process has required multiple visits. Heat and light have been used empirically in attempts to catalyze H2O2 decomposition and speed tooth lightening. The contribution of bleaching lights (LumaArch, Optilux 500, and Zoom!) to act as catalysts for lightening teeth was studied in 83 pairs of contralateral anterior maxillary and mandibular teeth on 15 human subjects. Split-arch design using centrals, laterals, and canines on one side treated with bleach plus light, were compared with contralateral teeth using bleach alone. Three researchers trained in the use of the Vitapan 3D-Master Shade Guide took shades with independently agreement within 0.5 value-chroma sum 89% of the time throughout the study Laboratory tests determined bleach gel chemistry, bleach light output, and effects on the bleaches of light alone and heat alone. Results showed that the three test lights did not lighten teeth more than their bleach gels alone. All teeth lightened to nearly the same degree (1.7 color increments), but LumaArch required 60% less time and Zoom! used 1/3 lower H2O2 concentration. Laboratory tests indicated that the proprietary chemicals mixed into each bleach gel just before use acted as catalysts and were probably responsible for more rapid lightening produced by LumaArch gel, and need for less H2O2 in Zoom! gel. Neither the heat produced by the accessory lights, nor the light output itself were responsible for catalytic activity with any of the three systems tested. Collectively, the data demonstrate positive effects from chemical catalysts added to bleaching gels. No output from any of the lights resulted in heat or light that catalyzed the gels.

UV light synergistically enhances the cardiotoxic effects of interleukin 1beta through peroxynitrite formation

BACKGROUND

Proinflammatory cytokines play an important role in chronic cardiac diseases.

METHODS AND RESULTS

Neonatal rat cardiomyocytes were exposed to interleukin (IL)-1beta (2 ng/mL) for 4 days. We assessed contractility through videomicroscopy and calcium transients with the Ca(2+)-sensitive dye fura-2. In IL-1beta-treated cells, the UV excitation (380 nm) necessary to induce dye fluorescence effected a rapid cessation of Ca(2+) transients and contraction, accompanied by calcium overload originating from an intracellular compartment. This occurred in the absence of fura-2 but required UV illumination. Incubation with 10 mmol/L N-acetylcysteine prevented this response, suggesting a free radical-mediated event. However, exposure to IL-1beta either increased or did not change the activity of the free radical scavengers superoxide dismutase, catalase, and glutathione peroxidase. In contrast, lipid peroxidation increased by 600% (P < or =.0001) in the IL-1beta plus UV-treated cells, an effect eliminated by L-NMMA. L-NMMA also completely abolished the UV-mediated cytotoxicity. We used immunohistochemistry to localize nitrotyrosine accumulation in the myocytes cotreated with IL-1beta and UV, an effect that was also blocked by L-NMMA.

CONCLUSIONS

We hypothesize that the toxic radical peroxynitrite, arising from nitric oxide and superoxide anion, may be responsible for tetany and acute cardiomyocyte death. These results demonstrate the potential role of peroxynitrite in cardiotoxicity, which may be important in cardiac diseases associated with proinflammatory cytokines.

Sequence of metabolic changes during X-ray-induced apoptosis

A cell population undergoing apoptosis usually contains varying proportions of cells in the diverse stages of the process, from very early continuously through to secondary necrosis. This heterogeneity acts as a confounding factor in metabolic studies if a general population is investigated. Using fluorescent probes and multiparameter flow cytometry, we report on metabolic changes occurring during X-ray-induced apoptosis in human peripheral blood lymphocytes and relate the observed alterations to cells at various phases of the process assessed by monitoring the progressive loss of selective plasma membrane permeability. Data show that alterations of mitochondria cardiolipin and a reduction of plasma membrane potential are rather early events as they commence in cells which still possess an impermeable plasma membrane. Conversely, mitochondrial transmembrane potential is impaired only when plasma membrane permeability starts to be altered, that is, in relatively later apoptotic cells, thereby reflecting the complexity of mitochondria demise during apoptosis. The prooxidant/antioxidant balance is altered in cells in early apoptosis with a correlated increase of prooxidants and depletion of thiols, the latter indicative for the progressive impairment of this detoxifying mechanism. The imbalance in prooxidant/antioxidant remained evident through apoptosis suggesting that oxidative damage starts early and then continues, eventually leading to cellular disruption. Assessing cell transit through the apoptotic process and coupling the observed metabolic changes to selected stages of the process enables one to improve the understanding of the temporary sequence of biochemical phenomena occurring in a given model.

[The function of the oxidant-antioxidant system in patients with laryngeal cancer]

Lipid peroxidation and antioxidant system were studied at hospital admission, on postoperative day 1, 3 weeks and half a year after surgery in 86 patients with different stages of laryngeal cancer. A correlation is stated between lipid peroxidation disturbances and the defects in the protective antioxidant system. Low-frequency laser irradiation of autoblood produced a clinically beneficial effect and stabilized biochemically the relations between lipid peroxidation and antioxidant systems.

[Effect of health resort treatment on the status of the oxidant and antioxidant systems in women with disordered reproductive function residing in the area of the Chernobyl Atomic Power Plant accident]

Lipid peroxidation system and its reaction to balneotherapy (hydrogen sulfide and iodine bromide exposure) were examined in 60 women with reproductive system disorders living in radionuclide pollution zone after the Chernobyl accident. Certain specificities of lipid peroxidation system in this patient population were detected and a favorable effect of the said balneotherapy noted.