Clinical Impact on Dental Implant Survival in Patients Taking Antiresorptive Medications: A Systematic Review and Meta-Analysis

Dental implants are a predictable option to replace missing teeth. Patients on antiresorptive medications used to treat disorders associated with bone resorption may need dental implants to replace missing teeth. The data on implant failure in patients on antiresorptive medication requiring dental implants, is conflicting and limited. This systematic review aims to investigate if antiresorptive medications have any clinical impact on dental implant survival. Electronic databases were searched until May 2020. The focus question (PICOS): Participants: humans, Interventions: implant placement surgery in patients on antiresorptive medication, Comparisons: patients on antiresorptive medication vs control (patients not on antiresorptive medication), Outcomes: implant survival, and Study design: clinical studies. The protocol of this systematic review was registered in PROSPERO (CRD42020209083). Fourteen nonrandomized studies were selected for data extraction and risk of bias assessment using the ROBINS-1 tool. Only studies with a control were included for the meta-analysis, 8 articles were included in the meta-analysis using implant-level data, and 5 articles were included in the meta-analysis using patient-level data. There was no statistical significance between the 2 groups at the patient level based on 265 patients. However, there was a statistically significant difference at the implant level based on 2697 implants. Therefore, antiresorptive medications, mainly bisphosphonates (BPs), may significantly contribute to implant failure. Antiresorptive medications, especially BPs may reduce implant survival and impair the osseointegration of dental implants. Failed implants in patients on BPs may not lead to osteonecrosis and may be replaced with success.

IscA, an alternate scaffold for Fe-S cluster biosynthesis

An IscA homologue within the nif regulon of Azotobacter vinelandii, designated (Nif)IscA, was expressed in Escherichia coli and purified to homogeneity. Purified (Nif)IscA was found to be a homodimer of 11-kDa subunits that contained no metal centers or other prosthetic groups in its as-isolated form. Possible roles for (Nif)IscA in Fe-S cluster biosynthesis were assessed by investigating the ability to bind iron and to assemble Fe-S clusters in a NifS-directed process, as monitored by the combination of UV-vis absorption, Mössbauer, resonance Raman, variable-temperature magnetic circular dichroism, and EPR spectroscopies. Although (Nif)IscA was found to bind ferrous ion in a tetrahedral, predominantly cysteinyl-ligated coordination environment, the low-binding affinity argues against a specific role as a metallochaperone for the delivery of ferrous ion to other Fe-S cluster assembly proteins. Rather, a role for (Nif)IscA as an alternate scaffold protein for Fe-S cluster biosynthesis is proposed, based on the NifS-directed assembly of approximately one labile [4Fe-4S](2+) cluster per (Nif)IscA homodimer, via a transient [2Fe-2S](2+) cluster intermediate. The cluster assembly process was monitored temporally using UV-vis absorption and Mössbauer spectroscopy, and the intermediate [2Fe-2S](2+)-containing species was additionally characterized by resonance Raman spectroscopy. The Mössbauer and resonance Raman properties of the [2Fe-2S](2+) center are consistent with complete cysteinyl ligation. The presence of three conserved cysteine residues in all IscA proteins and the observed cluster stoichiometry of approximately one [2Fe-2S](2+) or one [4Fe-4S](2+) per homodimer suggest that both cluster types are subunit bridging. In addition, (Nif)IscA was shown to couple delivery of iron and sulfur by using ferrous ion to reduce sulfane sulfur. The ability of Fe-S scaffold proteins to couple the delivery of these two toxic and reactive Fe-S cluster precursors is likely to be important for minimizing the cellular concentrations of free ferrous and sulfide ions. On the basis of the spectroscopic and analytical results, mechanistic schemes for NifS-directed cluster assembly on (Nif)IscA are proposed. It is proposed that the IscA family of proteins provide alternative scaffolds to the NifU and IscU proteins for mediating nif-specific and general Fe-S cluster assembly.

Rational reprogramming of the R2 subunit of Escherichia coli ribonucleotide reductase into a self-hydroxylating monooxygenase

The outcome of O2 activation at the diiron(II) cluster in the R2 subunit of Escherichia coli (class I) ribonucleotide reductase has been rationally altered from the normal tyrosyl radical (Y122*) production to self-hydroxylation of a phenylalanine side-chain by two amino acid substitutions that leave intact the (histidine)2-(carboxylate)4 ligand set characteristic of the diiron-carboxylate family. Iron ligand Asp (D) 84 was replaced with Glu (E), the amino acid found in the cognate position of the structurally similar diiron-carboxylate protein, methane monooxygenase hydroxylase (MMOH). We previously showed that this substitution allows accumulation of a mu-1,2-peroxodiiron(III) intermediate, which does not accumulate in the wild-type (wt) protein and is probably a structural homologue of intermediate P (H(peroxo)) in O2 activation by MMOH. In addition, the near-surface residue Trp (W) 48 was replaced with Phe (F), blocking transfer of the "extra" electron that occurs in wt R2 during formation of the formally Fe(III)Fe(IV) cluster X. Decay of the mu-1,2-peroxodiiron(III) complex in R2-W48F/D84E gives an initial brown product, which contains very little Y122* and which converts very slowly (t1/2 approximately 7 h) upon incubation at 0 degrees C to an intensely purple final product. X-ray crystallographic analysis of the purple product indicates that F208 has undergone epsilon-hydroxylation and the resulting phenol has shifted significantly to become a ligand to Fe2 of the diiron cluster. Resonance Raman (RR) spectra of the purple product generated with 16O2 or 18O2 show appropriate isotopic sensitivity in bands assigned to O-phenyl and Fe-O-phenyl vibrational modes, confirming that the oxygen of the Fe(III)-phenolate species is derived from O2. Chemical analysis, experiments involving interception of the hydroxylating intermediate with exogenous reductant, and Mössbauer and EXAFS characterization of the brown and purple species establish that F208 hydroxylation occurs during decay of the peroxo complex and formation of the initial brown product. The slow transition to the purple Fe(III)-phenolate species is ascribed to a ligand rearrangement in which mu-O2- is lost and the F208-derived phenolate coordinates. The reprogramming to F208 monooxygenase requires both amino acid substitutions, as very little epsilon-hydroxyphenylalanine is formed and pathways leading to Y122* formation predominate in both R2-D84E and R2-W48F.

Mössbauer characterization of the iron-sulfur clusters in Desulfovibrio vulgaris hydrogenase

The periplasmic hydrogenase of Desulfovibrio vulgaris (Hildenbourough) is an all Fe-containing hydrogenase. It contains two ferredoxin type [4Fe-4S] clusters, termed the F clusters, and a catalytic H cluster. Recent X-ray crystallographic studies on two Fe hydrogenases revealed that the H cluster is composed of two sub-clusters, a [4Fe-4S] cluster ([4Fe-4S](H)) and a binuclear Fe cluster ([2Fe](H)), bridged by a cysteine sulfur. The aerobically purified D. vulgaris hydrogenase is stable in air. It is inactive and requires reductive activation. Upon reduction, the enzyme becomes sensitive to O(2), indicating that the reductive activation process is irreversible. Previous EPR investigations showed that upon reoxidation (under argon) the H cluster exhibits a rhombic EPR signal that is not seen in the as-purified enzyme, suggesting a conformational change in association with the reductive activation. For the purpose of gaining more information on the electronic properties of this unique H cluster and to understand further the reductive activation process, variable-temperature and variable-field Mössbauer spectroscopy has been used to characterize the Fe-S clusters in D. vulgaris hydrogenase poised at different redox states generated during a reductive titration, and in the CO-reacted enzyme. The data were successfully decomposed into spectral components corresponding to the F and H clusters, and characteristic parameters describing the electronic and magnetic properties of the F and H clusters were obtained. Consistent with the X-ray crystallographic results, the spectra of the H cluster can be understood as originating from an exchange coupled [4Fe-4S]-[2Fe] system. In particular, detailed analysis of the data reveals that the reductive activation begins with reduction of the [4Fe-4S](H) cluster from the 2+ to the 1+ state, followed by transfer of the reducing equivalent from the [4Fe-4S](H) subcluster to the binuclear [2Fe](H) subcluster. The results also reveal that binding of exogenous CO to the H cluster affects significantly the exchange coupling between the [4Fe-4S](H) and the [2Fe](H) subclusters. Implication of such a CO binding effect is discussed.

Mössbauer characterization of the iron-sulfur clusters in Desulfovibrio vulgaris hydrogenase

The periplasmic hydrogenase of Desulfovibrio vulgaris (Hildenbourough) is an all Fe-containing hydrogenase. It contains two ferredoxin type [4Fe-4S] clusters, termed the F clusters, and a catalytic H cluster. Recent X-ray crystallographic studies on two Fe hydrogenases revealed that the H cluster is composed of two sub-clusters, a [4Fe-4S] cluster ([4Fe-4S](H)) and a binuclear Fe cluster ([2Fe](H)), bridged by a cysteine sulfur. The aerobically purified D. vulgaris hydrogenase is stable in air. It is inactive and requires reductive activation. Upon reduction, the enzyme becomes sensitive to O(2), indicating that the reductive activation process is irreversible. Previous EPR investigations showed that upon reoxidation (under argon) the H cluster exhibits a rhombic EPR signal that is not seen in the as-purified enzyme, suggesting a conformational change in association with the reductive activation. For the purpose of gaining more information on the electronic properties of this unique H cluster and to understand further the reductive activation process, variable-temperature and variable-field Mössbauer spectroscopy has been used to characterize the Fe-S clusters in D. vulgaris hydrogenase poised at different redox states generated during a reductive titration, and in the CO-reacted enzyme. The data were successfully decomposed into spectral components corresponding to the F and H clusters, and characteristic parameters describing the electronic and magnetic properties of the F and H clusters were obtained. Consistent with the X-ray crystallographic results, the spectra of the H cluster can be understood as originating from an exchange coupled [4Fe-4S]-[2Fe] system. In particular, detailed analysis of the data reveals that the reductive activation begins with reduction of the [4Fe-4S](H) cluster from the 2+ to the 1+ state, followed by transfer of the reducing equivalent from the [4Fe-4S](H) subcluster to the binuclear [2Fe](H) subcluster. The results also reveal that binding of exogenous CO to the H cluster affects significantly the exchange coupling between the [4Fe-4S](H) and the [2Fe](H) subclusters. Implication of such a CO binding effect is discussed.

Neelaredoxin, an iron-binding protein from the syphilis spirochete, Treponema pallidum, is a superoxide reductase

Treponema pallidum, the causative agent of venereal syphilis, is a microaerophilic obligate pathogen of humans. As it disseminates hematogenously and invades a wide range of tissues, T. pallidum presumably must tolerate substantial oxidative stress. Analysis of the T. pallidum genome indicates that the syphilis spirochete lacks most of the iron-binding proteins present in many other bacterial pathogens, including the oxidative defense enzymes superoxide dismutase, catalase, and peroxidase, but does possess an orthologue (TP0823) for neelaredoxin, an enzyme of hyperthermophilic and sulfate-reducing anaerobes shown to possess superoxide reductase activity. To analyze the potential role of neelaredoxin in treponemal oxidative defense, we examined the biochemical, spectroscopic, and antioxidant properties of recombinant T. pallidum neelaredoxin. Neelaredoxin was shown to be expressed in T. pallidum by reverse transcriptase-polymerase chain reaction and Western blot analysis. Recombinant neelaredoxin is a 26-kDa alpha(2) homodimer containing, on average, 0.7 iron atoms/subunit. Mössbauer and EPR analysis of the purified protein indicates that the iron atom exists as a mononuclear center in a mixture of high spin ferrous and ferric oxidation states. The fully oxidized form, obtained by the addition of K(3)(Fe(CN)(6)), exhibits an optical spectrum with absorbances at 280, 320, and 656 nm; the last feature is responsible for the protein's blue color, which disappears upon ascorbate reduction. The fully oxidized protein has a A(280)/A(656) ratio of 10.3. Enzymatic studies revealed that T. pallidum neelaredoxin is able to catalyze a redox equilibrium between superoxide and hydrogen peroxide, a result consistent with it being a superoxide reductase. This finding, the first description of a T. pallidum iron-binding protein, indicates that the syphilis spirochete copes with oxidative stress via a primitive mechanism, which, thus far, has not been described in pathogenic bacteria.

IscU as a scaffold for iron-sulfur cluster biosynthesis: sequential assembly of [2Fe-2S] and [4Fe-4S] clusters in IscU

Iron-sulfur cluster biosynthesis in both prokaryotic and eukaryotic cells is known to be mediated by two highly conserved proteins, termed IscS and IscU in prokaryotes. The homodimeric IscS protein has been shown to be a cysteine desulfurase that catalyzes the reductive conversion of cysteine to alanine and sulfide. In this work, the time course of IscS-mediated Fe-S cluster assembly in IscU was monitored via anaerobic anion exchange chromatography. The nature and properties of the clusters assembled in discrete fractions were assessed via analytical studies together with absorption, resonance Raman, and Mössbauer investigations. The results show sequential cluster assembly with the initial IscU product containing one [2Fe-2S](2+) cluster per dimer converting first to a form containing two [2Fe-2S](2+) clusters per dimer and finally to a form that contains one [4Fe-4S](2+) cluster per dimer. Both the [2Fe-2S](2+) and [4Fe-4S](2+) clusters in IscU are reductively labile and are degraded within minutes upon being exposed to air. On the basis of sequence considerations and spectroscopic studies, the [2Fe-2S](2+) clusters in IscU are shown to have incomplete cysteinyl ligation. In addition, the resonance Raman spectrum of the [4Fe-4S](2+) cluster in IscU is best interpreted in terms of noncysteinyl ligation at a unique Fe site. The ability to assemble both [2Fe-2S](2+) and [4Fe-4S](2+) clusters in IscU supports the proposal that this ubiquitous protein provides a scaffold for IscS-mediated assembly of clusters that are subsequently used for maturation of apo Fe-S proteins.

A short Fe-Fe distance in peroxodiferric ferritin: control of Fe substrate versus cofactor decay?

The reaction of oxygen with protein diiron sites is important in bioorganic syntheses and biomineralization. An unusually short Fe-Fe distance of 2.53 angstroms was found in the diiron (mu-1,2 peroxodiferric) intermediate that forms in the early steps of ferritin biomineralization. This distance suggests the presence of a unique triply bridged structure. The Fe-Fe distances in the mu-1, 2 peroxodiferric complexes that were characterized previously are much longer (3.1 to 4.0 angstroms). The 2.53 angstrom Fe-Fe distance requires a small Fe-O-O angle (approximately 106 degrees to 107 degrees). This geometry should favor decay of the peroxodiferric complex by the release of H2O2 and mu-oxo or mu-hydroxo diferric biomineral precursors rather than by oxidation of the organic substrate. Geometrical differences may thus explain how diiron sites can function either as a substrate (in ferritin biomineralization) or as a cofactor (in O2 activation).

Formation of a pterin radical in the reaction of the heme domain of inducible nitric oxide synthase with oxygen

The heme domain (iNOS(heme)) of inducible nitric oxide synthase (NOS) was expressed in Escherichia coli and purified to homogeneity. Rapid freeze-quench (RFQ) EPR was used to monitor the reaction of the reduced iNOS(heme) with oxygen in the presence and absence of substrate. In these reactions, heme oxidation occurs at a rate of approximately 15 s(-)(1) at 4 degrees C. A transient species with a g = 2.0 EPR signal is also observed under these conditions. The spectral properties of the g = 2.0 signal are those of an anisotropic organic radical with S = (1)/(2). Comparison of the EPR spectra obtained when iNOS(heme) is reconstituted with N5-(14)N- and (15)N-substituted tetrahydrobiopterin (H(4)B) shows a hyperfine interaction with the pterin N5 nitrogen and identifies the radical as the one-electron oxidized form (H(3)B.) of the bound H(4)B. Substitution of D(2)O for H(2)O reveals the presence of hyperfine-coupled exchangeable protons in the H(4)B radical. This radical forms at a rate of 15-20 s(-)(1), with a slower decay rate that varies (0.12-0.7 s(-)(1)) depending on the substrate. At 127 ms, H(3)B. accumulates to a maximum of 80% of the total iNOS(heme) concentration in the presence of arginine but only to approximately 2.8% in the presence of NHA. Double-mixing RFQ experiments, where NHA is added after the formation of H(3)B., show that NHA does not react rapidly with H(3)B. and suggest that NHA instead prevents the formation of the H(4)B radical. These data constitute the first direct evidence for an NOS-bound H(3)B. and are most consistent with a role for H(4)B in electron transfer in the NOS reaction.

Biochemical and spectroscopic characterization of overexpressed fuscoredoxin from Escherichia coli

Fuscoredoxin is a unique iron containing protein of yet unknown function originally discovered in the sulfate reducers of the genus Desulfovibrio. It contains two iron-sulfur clusters: a cubane [4Fe-4S] and a mixed oxo- and sulfido-bridged 4Fe cluster of unprecedented structure. The recent determination of the genomic sequence of Escherichia coli (E. coli) has revealed a homologue of fuscoredoxin in this facultative microbe. The presence of this gene in E. coli raises interesting questions regarding the function of fuscoredoxin and whether this gene represents a structural homologue of the better-characterized Desulfovibrio proteins. In order to explore the latter, an overexpression system for the E. coli fuscoredoxin gene was devised. The gene was cloned from genomic DNA by use of the polymerase chain reaction into the expression vector pT7-7 and overexpressed in E. coli BL21(DE3) cells. After two chromatographic steps a good yield of recombinant protein was obtained (approximately 4 mg of pure protein per liter of culture). The purified protein exhibits an optical spectrum characteristic of the homologue from D. desulfuricans, indicating that cofactor assembly was accomplished. Iron analysis indicated that the protein contains circa 8 iron atoms/molecule which were shown by EPR and Mössbauer spectroscopies to be present as two multinuclear clusters, albeit with slightly altered spectroscopic features. A comparison of the primary sequences of fuscoredoxins is presented and differences on cluster coordination modes are discussed on the light of the spectroscopic data.

The ferroxidase reaction of ferritin reveals a diferric mu-1,2 bridging peroxide intermediate in common with other O2-activating non-heme diiron proteins

Ferritins are ubiquitous proteins that concentrate, store, and detoxify intracellular iron through oxidation of Fe2+ (ferroxidation), followed by translocation and hydrolysis to form a large inorganic mineral core. A series of mutagenesis, kinetics, and spectroscopic studies of ferritin led to the proposal that the oxidation/translocation path involves a diiron protein site. Recent stopped-flow absorption and rapid freeze-quench Mössbauer studies have identified a single peroxodiferric species as the initial transient intermediate formed in recombinant frog M ferritin during rapid ferroxidation [Pereira, S. A., Small, W., Krebs, C., Tavares, P., Edmondson, D. E., Theil, E. C., and Huynh, B. H. (1998) Biochemistry 37, 9871-9876]. To further characterize this transient intermediate and to establish unambiguously the peroxodiferric assignment, rapid freeze-quenching was used to trap the initial intermediate for resonance Raman investigation. Discrete vibrational modes are observed for this intermediate, indicating a single chromophore in a homogeneous state, in agreement with the Mössbauer conclusions. The frequency at 851 cm-1 is assigned as nu(O-O) of the bound peroxide, and the pair of frequencies at 485 and 499 cm-1 is attributed, respectively, to nus and nuas of Fe-O2-Fe. Identification of the chromophore as a micro-1,2 bridged diferric peroxide is provided by the isotope sensitivity of these Raman bands. Similar peroxodiferric intermediates have been detected in a mutant of the R2 subunit of ribonucleotide reductase from Escherichia coli and chemically reduced Delta9 stearoyl-acyl carrier protein desaturase (Delta9D), but in contrast, the ferritin intermediate is trapped from the true reaction pathway of the native protein. Differences in the Raman signatures of these peroxide species are assigned to variations in Fe-O-O-Fe angles and may relate to whether the iron is retained in the catalytic center or released as an oxidized product.

Pteridine analysis in urine by capillary electrophoresis using laser-induced fluorescence detection

Pteridines are a class of compounds excreted in urine, the levels of which are found to elevate significantly in tumor-related diseases. For the first time, we have developed a method, based on high-performance capillary electrophoresis (HPCE) and laser-induced fluorescence (LIF) detection, to monitor the pteridine levels in urine. HPCE provides better separation than high-performance liquid chromatography and the LIF detector enables us to detect minute amounts of pteridines in body fluid. Eight different pteridine derivatives were well separated in 0.1 M Tris-0.1 M borate-2 mM EDTA buffer (pH 8.75) using a 60-cm fused-silica capillary (50-micron i.d., 35-cm effective length), six of which were detected and characterized in urine samples from normal persons and different cancer patients. The detection limits of these pteridines are under 1 x 10(-10) M. The levels of neopterin, pterine, xanthopterin, and pterin-6-carboxylic acid were found to be significantly elevated in urine excreted by cancer patents, while the level of isoxanthopterin dropped in these patients. No significant change of biopterin level was found between healthy individuals and cancer patients. This method can be used in clinical laboratories either for cancer monitoring or for precancer screening.

Direct spectroscopic and kinetic evidence for the involvement of a peroxodiferric intermediate during the ferroxidase reaction in fast ferritin mineralization

Rapid freeze-quench (RFQ) Mössbauer and stopped-flow absorption spectroscopy were used to monitor the ferritin ferroxidase reaction using recombinant (apo) frog M ferritin; the initial transient ferric species could be trapped by the RFQ method using low iron loading (36 Fe2+/ferritin molecule). Biphasic kinetics of ferroxidation were observed and measured directly by the Mössbauer method; a majority (85%) of the ferrous ions was oxidized at a fast rate of approximately 80 s-1 and the remainder at a much slower rate of approximately 1.7 s-1. In parallel with the fast phase oxidation of the Fe2+ ions, a single transient iron species is formed which exhibits magnetic properties (diamagnetic ground state) and Mössbauer parameters (DeltaEQ = 1.08 +/- 0.03 mm/s and delta = 0.62 +/- 0.02 mm/s) indicative of an antiferromagnetically coupled peroxodiferric complex. The formation and decay rates of this transient diiron species measured by the RFQ Mössbauer method match those of a transient blue species (lambdamax = 650 nm) determined by the stopped-flow absorbance measurement. Thus, the transient colored species is assigned to the same peroxodiferric intermediate. Similar transient colored species have been detected by other investigators in several other fast ferritins (H and M subunit types), such as the human H ferritin and the Escherichia coli ferritin, suggesting a similar mechanism for the ferritin ferroxidase step in all fast ferritins. Peroxodiferric complexes are also formed as early intermediates in the reaction of O2 with the catalytic diiron centers in the hydroxylase component of soluble methane monooxygenase (MMOH) and in the D84E mutant of the R2 subunit of E. coli ribonucleotide reductase. The proposal that a single protein site, with a structure homologous to the diiron centers in MMOH and R2, is involved in the ferritin ferroxidation step is confirmed by the observed kinetics, spectroscopic properties, and purity of the initial peroxodiferric species formed in the frog M ferritin.

Characterization of Y122F R2 of Escherichia coli ribonucleotide reductase by time-resolved physical biochemical methods and X-ray crystallography

Ribonucleotide reductase (RNR) from Escherichia coli catalyzes the conversion of ribonucleotides to deoxyribonucleotides. It is composed of two homodimeric subunits, R1 and R2. R2 contains the diferric-tyrosyl radical cofactor essential for the nucleotide reduction process. The in vitro mechanism of assembly of this cluster starting with apo R2 or with a diferrous form of R2 has been examined by time-resolved physical biochemical methods. An intermediate, Fe3+/Fe4+ cluster (intermediate X), has been identified that is thought to be directly involved in the oxidation of Y122 to the tyrosyl radical (*Y122). An R2 mutant in which phenylalanine has replaced Y122 has been used to accumulate intermediate X at sufficient levels that it can be studied using a variety of spectroscopic methods. The details of the reconstitution of the apo and diferrous forms of Y122F R2 have been examined by stopped-flow UV/vis spectroscopy and by rapid freeze quench electron paramagnetic resonance, and Mössbauer spectroscopies. In addition the structure of this mutant, crystallized at pH 7.6 in the absence of mercury, at 2.46 A resolution has been determined. These studies suggest that Y122F R2 is an appropriate model for the examination of intermediate X in the assembly process. Studies with two mutants, Y356F and double mutant Y356F and Y122F R2, are interpreted in terms of the possible role of Y356 in the putative electron transfer reaction between the R1 and R2 subunits of this RNR.

Spectroscopic characterization of a novel tetranuclear Fe cluster in an iron-sulfur protein isolated from Desulfovibrio desulfuricans

Mossbauer and EPR spectroscopies were used to characterize the Fe clusters in an Fe-S protein isolated from Desulfovibrio desulfuricans (ATCC 27774). This protein was previously thought to contain hexanuclear Fe clusters, but a recent X-ray crystallographic measurement on a similar protein isolated from Desulfovibrio vulgaris showed that the protein contains two tetranuclear clusters, a cubane-type [4Fe-4S] cluster and a mixed-ligand cluster of novel structure [Lindley et al. (1997) Abstract, Chemistry of Metals in Biological Systems, European Research Conference, Tomar, Portugal]. Three protein samples poised at different redox potentials (as-purified, 40 and 320 mV) were investigated. In all three samples, the [4Fe-4S] cluster was found to be present in the diamagnetic 2+ oxidation state and exhibited typical Mossbauer spectra. The novel-structure cluster was found to be redox active. In the 320-mV and as-purified samples, the cluster is at a redox equilibrium between its fully oxidized and one-electron reduced states. In the 40-mV sample, the cluster is in a two-electron reduced state. Distinct spectral components associated with the four Fe sites of cluster 2 in the three oxidation states were identified. The spectroscopic parameters obtained for the Fe sites reflect different ligand environments, making it possible to assign the spectral components to individual Fe sites. In the fully oxidized state, all four iron ions are high-spin ferric and antiferromagnetically coupled to form a diamagnetic S = 0 state. In the one-electron and two-electron reduced states, the reducing electrons were found to localize, consecutively, onto two Fe sites that are rich in oxygen/nitrogen ligands. Based on the X-ray structure and the Mossbauer parameters, attempts could be made to identify the reduced Fe sites. For the two-electron reduced cluster, EPR and Mossbauer data indicate that the cluster is paramagnetic with a nonzero interger spin. For the one-electron reduced cluster, the data suggest a half-integer spin of 9/2. Characteristic fine and hyperfine parameters for all four Fe sites were obtained. Structural implications and the nature of the spin-coupling interactions are discussed.

Electron injection through a specific pathway determines the outcome of oxygen activation at the diiron cluster in the F208Y mutant of Escherichia coli ribonucleotide reductase protein R2

Protein R2 of ribonucleotide reductase from Escherichia coli contains a dinuclear iron cluster, which reductively activates O2 to produce the enzyme's functionally essential tyrosyl radical by one-electron oxidation of residue Y122. A key step in this reaction is the rapid injection of a single electron from an exogenous reductant (Fe2+ or ascorbate) during formation of the radical-generating intermediate, cluster X, from the diiron(II) cluster and O2. As this step leaves only one of the two oxidizing equivalents of the initial diiron(II)-O2 adduct, it commits the reaction to a one-electron oxidation outcome and precludes possible two-electron alternatives (as occur in the related diiron bacterial alkane hydroxylases and fatty acyl desaturases). In the F208Y site-directed mutant of R2, Y208 is hydroxylated (a two-electron oxidation) in preference to the normal reaction [Aberg, A., Ormö, M., Nordlund, P., & Sjöberg, B. M. (1993) Biochemistry 32, 9845-9850], implying that this substitution blocks electron injection or (more likely) introduces an endogenous reductant (Y208) that effectively competes. Here we demonstrate that O2 activation in the F208Y mutant of R2 partitions between these two-electron (Y208 hydroxylation) and one-electron (Y122 radical production) outcomes and that the latter becomes predominant under conditions which favor electron injection (namely, high concentration of the reductant ascorbate). Moreover, we show that the sensitivity of the partition ratio to ascorbate concentration is strictly dependent on the integrity of a hydrogen-bond network involving the near surface residue W48: when this residue is substituted with F, Y208 hydroxylation predominates irrespective of ascorbate concentration. These data suggest that the hydrogen-bond network involving W48 is a specific electron-transfer pathway between the cofactor site and the protein surface.

Rapid and parallel formation of Fe3+ multimers, including a trimer, during H-type subunit ferritin mineralization

Conversion of Fe ions in solution to the solid phase in ferritin concentrates iron required for cell function. The rate of the Fe phase transition in ferritin is tissue specific and reflects the differential expression of two classes of ferritin subunits (H and L). Early stages of mineralization were probed by rapid freeze-quench Mossbauer, at strong fields (up to 8 T), and EPR spectroscopy in an H-type subunit, recombinant frog ferritin; small numbers of Fe (36 moles/mol of protein) were used to increase Fe3+ in mineral precursor forms. At 25 ms, four Fe3+-oxy species (three Fe dimers and one Fe trimer) were identified. These Fe3+-oxy species were found to form at similar rates and decay subsequently to a distinctive superparamagentic species designated the "young core." The rate of oxidation of Fe2+ (1026 s(-1)) corresponded well to the formation constant for the Fe3+-tyrosinate complex (920 s(-1)) observed previously [Waldo, G. S., & Theil, E. C. (1993) Biochemistry 32, 13261] and, coupled with EPR data, indicates that several or possibly all of the Fe3+-oxy species involve tyrosine. The results, combined with previous Mossbauer studies of Y30F human H-type ferritin which showed decreases in several Fe3+ intermediates and stabilization of Fe2+ [Bauminger, E. R., et al. (1993) Biochem. J. 296, 709], emphasize the involvement of tyrosyl residues in the mineralization of H-type ferritins. The subsequent decay of these multiple Fe3+-oxy species to the superparamagnetic mineral suggests that Fe3+ species in different environments may be translocated as intact units from the protein shell into the ferritin cavity where the conversion to a solid mineral occurs.

Redox properties of cytochrome c nitrite reductase from Desulfovibrio desulfuricans ATCC 27774

The dissimilatory nitrite reductase from Desulfovibrio desulfuricans ATCC 27774 catalyzes the reduction of nitrite to ammonia. Previous spectroscopic investigation revealed that it is a hexaheme cytochrome containing one high spin ferric heme and five low spin ferric hemes in the oxidized enzyme. The current study uses the high resolution of Mössbauer spectroscopy to obtain redox properties of the six heme groups. Correlating the Mössbauer findings with the EPR data reveals the pairwise spin-spin coupling among four of the heme groups. The other two hemes are found to be magnetically isolated. Reduction with dithionite and reaction with CO further indicate that only the high spin heme is capable of binding small exogenous ligands. These results confirm our previous finding that Desulfovibrio desulfuricans nitrite reductase contains six heme groups and that the high spin ferric heme is the substrate and inhibitor binding site.

Characterization of the iron-binding site in mammalian ferrochelatase by kinetic and Mössbauer methods

All organisms utilize ferrochelatase (protoheme ferrolyase, EC 4.99.1.1) to catalyze the terminal step of the heme biosynthetic pathway, which involves the insertion of ferrous ion into protoporphyrin IX. Kinetic methods and Mössbauer spectroscopy have been used in an effort to characterize the ferrous ion-binding active site of recombinant murine ferrochelatase. The kinetic studies indicate that dithiothreitol, a reducing agent commonly used in ferrochelatase activity assays, interferes with the enzymatic production of heme. Ferrochelatase specific activity values determined under strictly anaerobic conditions are much greater than those obtained for the same enzyme under aerobic conditions and in the presence of dithiothreitol. Mössbauer spectroscopy conclusively demonstrates that, under the commonly used assay conditions, dithiothreitol chelates ferrous ion and hence competes with the enzyme for binding the ferrous substrate. Mössbauer spectroscopy of ferrous ion incubated with ferrochelatase in the absence of dithiothreitol shows a somewhat broad quadrupole doublet. Spectral analysis indicates that when 0.1 mM Fe(II) is added to 1.75 mM ferrochelatase, the overwhelming majority of the added ferrous ion is bound to the protein. The spectroscopic parameters for this bound species are delta = 1.36 +/- 0.03 mm/s and delta EQ = 3.04 +/- 0.06 mm/s, distinct from the larger delta EQ of a control sample of Fe(II) in buffer only. The parameters for the bound species are consistent with an active site composed of nitrogenous/oxygenous ligands and inconsistent with the presence of sulfur ligands. This finding is in accord with the absence of conserved cysteines among the known ferrochelatase sequences. The implications these results have with regard to the mechanism of ferrochelatase activity are discussed.

Mössbauer characterization of Paracoccus denitrificans cytochrome c peroxidase. Further evidence for redox and calcium binding-induced heme-heme interaction

Mössbauer and electron paramagnetic resonance (EPR) spectroscopies were used to characterize the diheme cytochrome c peroxidase from Paracoccus denitrificans (L.M.D. 52.44). The spectra of the oxidized enzyme show two distinct spectral components characteristic of low spin ferric hemes (S = 1/2), revealing different heme environments for the two heme groups. The Paracoccus peroxidase can be non-physiologically reduced by ascorbate. Mössbauer investigation of the ascorbate-reduced peroxidase shows that only one heme (the high potential heme) is reduced and that the reduced heme is diamagnetic (S = 0). The other heme (the low potential heme) remains oxidized, indicating that the enzyme is in a mixed valence, half-reduced state. The EPR spectrum of the half-reduced peroxidase, however, shows two low spin ferric species with gmax = 2.89 (species I) and gmax = 2.78 (species II). This EPR observation, together with the Mössbauer result, suggests that both species are arising from the low potential heme. More interestingly, the spectroscopic properties of these two species are distinct from that of the low potential heme in the oxidized enzyme, providing evidence for heme-heme interaction induced by the reduction of the high potential heme. Addition of calcium ions to the half-reduced enzyme converts species II to species I. Since calcium has been found to promote peroxidase activity, species I may represent the active form of the peroxidatic heme.

Structure and function of ferrochelatase

Ferrochelatase is the terminal enzyme of the heme biosynthetic pathway in all cells. It catalyzes the insertion of ferrous iron into protoporphyrin IX, yielding heme. In eukaryotic cells, ferrochelatase is a mitochondrial inner membrane-associated protein with the active site facing the matrix. Decreased values of ferrochelatase activity in all tissues are a characteristic of patients with protoporphyria. Point-mutations in the ferrochelatase gene have been recently found to be associated with certain cases of erythropoietic protoporphyria. During the past four years, there have been considerable advances in different aspects related to structure and function of ferrochelatase. Genomic and cDNA clones for bacteria, yeast, barley, mouse, and human ferrochelatase have been isolated and sequenced. Functional expression of yeast ferrochelatase in yeast strains deficient in this enzyme, and expression in Escherichia coli and in baculovirus-infected insect cells of different ferrochelatase cDNAs have been accomplished. A recently identified (2Fe-2S) cluster appears to be a structural feature shared among mammalian ferrochelatases. Finally, functional studies of ferrochelatase site-directed mutants, in which key amino acids were replaced with residues identified in some cases of protoporphyria, will be summarized in the context of protein structure.

Recombinant Desulfovibrio vulgaris rubrerythrin. Isolation and characterization of the diiron domain

The gene encoding Desulfovibrio (D.) vulgaris rubrerythrin (Prickril, B. C., Kurtz, D. M., Jr., LeGall, J., & Voordouw, G. (1991) Biochemistry 30, 1118), a protein of unknown function containing both FeS4 and (mu-oxo)diiron sites, was cloned and overexpressed in Escherichia coli. Upon cell lysis, the overexpressed protein was found in an insoluble form deficient in iron. Iron was incorporated in vitro by dissolving the protein in 3 M guanidinium chloride, adding Fe(II) anaerobically and diluting the denaturant. This recombinant rubrerythrin was found to have properties very similar to those of rubrerythrin isolated from D. vulgaris, except that the recombinant rubrerythrin contained six rather than four (or five) iron atoms per 44 kDa homodimer. Analyses of UV-vis, Mössbauer, and EPR spectra showed that the six iron atoms in recombinant rubrerythrin are organized as two FeS4 and two (mu-oxo/hydroxo)diiron sites. In order to allow examination of the diiron sites in the absence of the FeS4 sites, a truncated gene encoding the N-terminal 152 residues of D. vulgaris rubrerythrin was also cloned and overexpressed as an insoluble protein in E. coli, and iron was incorporated by a procedure analogous to that for recombinant rubrerythrin. This so-called "chopped" rubrerythrin (CRr) was found to consist of an approximately 35 kDa homodimer containing four iron atoms. Spectroscopic characterization indicated that the four iron atoms in CRr are organized as two diiron sites, the majority of which closely resemble the (mu-oxo)diiron(III) sites in E. coli ribonucleotide reductase R2 protein, and a minor fraction of which resemble the mixed-valent diiron(II,III) site in methane monooxygenase hydroxylase.(ABSTRACT TRUNCATED AT 250 WORDS)

Use of rapid kinetics methods to study the assembly of the diferric-tyrosyl radical cofactor of E. coli ribonucleotide reductase

The SF-Abs, RFQ-EPR, and RFQ-Möss data on the R2 reconstitution reaction are all consistent with the mechanism of Scheme I, in which the intermediate X is the immediate precursor to the product cofactor, and illustrate how the continuous SF approach and the discontinuous RFQ methods can be complementary. Given the inherent differences in the methods, it should not be taken for granted that data from the two will be consistent. A number of problems can be associated with the RFQ approach. For example, isopentane could conceivably interfere with or alter the chemistry to be studied. A second potential problem involves temperature-dependent equilibria among different intermediate species. This problem has been encountered by Dooley et al. with the 6-hydroxydopa-requiring protein, plasma amine oxidase and was previously observed with the adenosylcobalamin-dependent ribonucleotide reductase by Blakley and co-workers. This potential complication should be considered when discrepancies arise between SF and RFQ data and in low temperature structural studies of reactive intermediates in general. Each of the three methods employed can yield time-resolved quantitation of reaction components. In this regard, SF-Abs has the disadvantage of poor resolution, such that quantitation of individual components most often requires sophisticated mathematical analysis. Obvious advantages to the RFQ-Möss method are the presence of an internal standard (the known amount of 57Fe being proportional to the total absorption area) and the spectroscopic activity of all reaction components which contain iron. In our hands, quantitation by RFQ-EPR was most problematic and least reproducible. This irreproducibility most likely relates to heterogeneity among samples in terms of volume and density. As discussed in detail by Ballou and Palmer, the packing factor, which relates to the fraction of a sample made up by the reaction solution (the remainder being frozen isopentane), is dependent on the investigator. Given this caveat, it is not surprising that the RFQ-EPR data had the greatest uncertainty in our hands. Placing a chemically unreactive, EPR active standard in each reaction mixture could help alleviate this problem. Time-resolved Möss methods can be extremely powerful if excellent, nonoverlapping reference spectra of starting materials, products, and intermediates are available. All of the iron centers can be examined simultaneously. The problems associated with Möss arise from its extreme insensitivity. It takes millimolar solutions of proteins and several days for data collection of each time point.(ABSTRACT TRUNCATED AT 400 WORDS)

Mössbauer characterization of the metal clusters in Azotobacter vinelandii nitrogenase VFe protein

The VFe protein of alternative nitrogenase, isolated from Azotobacter vinelandii, strain LS15 and designated as Av1', has been investigated by Mössbauer spectroscopy. The Mössbauer spectrum of the dithionite-reduced Av1', recorded at 4.2 K with a 60-millitesla magnetic field applied parallel to the gamma-beam, is a superposition of three spectral components: 1) a complex spectrum (the M component) with magnetic hyperfine structures attributed to the paramagnetic FeV cofactor, 2) a component (the P component) consisting of three quadrupole doublets identifiable as the Fe2+, D, and S doublets similar to those observed for the P cluster pairs in MoFe proteins, and 3) a minor (4% of total absorption) quadrupole doublet attributable to adventitiously bound iron. The observed 4.2-K parameters for the Fe2+ (delta EQ = 2.99 mm/s and delta = 0.64 mm/s), D (delta EQ = 0.75 mm/s and delta = 0.63 mm/s), and S (delta EQ = 1.2 mm/s and delta = 0.65 mm/s) iron sites and their temperature dependence are very similar to those observed for the P cluster pairs in the conventional MoFe proteins. Similar to those of the MoFe protein, strong field spectra indicate that these doublets are associated with a diamagnetic system. Their percent absorption intensities (Fe(2+)/D/S = 13.0:32.2:6.8) determined at 4.2 K after the removal of the contributions from the adventitiously bound iron are comparable to those of the P cluster pairs in MoFe proteins. These observations established that Av1' also contains P cluster pairs that are identical, in both composition and quantity, to those of the MoFe proteins; i.e. each molecule contains two P cluster pairs and each pair is formed by two Fe2+, five D, and one S iron sites. Considering that 52% absorption of the P component corresponding to two 8Fe clusters, the remaining 48% absorption determined for the M component is consistent with two 7Fe-containing FeV cofactors/molecule of Av1'. The fact that both P cluster pairs are found in the diamagnetic states implies that the S = 3/2 and S = 1/2 signals detected in earlier EPR measurements are associated with the FeV cofactor and suggests a spin mixture for the FeV cofactor in the dithionite-reduced Av1'.