Yearly and seasonal changes of specific IgE to japanese cedar pollen in a young population

BACKGROUND

There have been no detailed long-term observations of the relationship between specific IgE production and stimulation by various naturally occurring allergens.

OBJECTIVE

This study was conducted to elucidate the yearly and seasonal changes of specific IgE antibody production to Japanese cedar pollen, an allergen of Japanese cedar pollinosis, in young adults.

METHODS

The number of Japanese cedar pollen were counted over a period of 9 years. Changes in the percentages of antibody carriers to Japanese cedar pollen and mite were examined during these years. Changes in Japanese cedar pollen-specific IgE levels between a low exposure year and a high exposure year in individual subjects were also investigated.

RESULTS

From 1987 to 1995, the percentages of Japanese cedar pollen-IgE carriers varied from about 30% to 50% with the intensity of pollen stimulation, and carriers tended to increase yearly. The rates of anti-mite IgE carriers changed little. In the spring which is the pollen season, Japanese cedar pollen-IgE levels in low exposure years were weaker than those in high exposure years in individual subjects. Levels in autumn, which is not the pollen season, showed equivalent levels in both high and low exposure years. Anti-mite IgE levels in individual subjects varied little during these years.

CONCLUSIONS

A long-term follow-up study supported that Japanese cedar pollen-IgE production is mainly associated with the degree of allergen exposure.

In vitro thrombogenesis study in the Gyro C1E3 for vibration assessment

To clarify the correlation between vibration and thrombus formation in a centrifugal blood pump, a preliminary simulated thrombus study was conducted for possible detection of thrombus formation inside a pump. Additional in vitro thrombogenesis studies were performed to confirm the results of the preliminary study. The primary data acquisition equipment included an accelerometer (Isotron PE accelerometer, Endevco, San Juan Capistrano, CA, U.S.A.), digitizing oscilloscope (TDS 420, Tektronic, Inc., MA, U.S.A.), and pivot bearing centrifugal pumps. The accelerometer was mounted to the top of the pump casing to sense radial and axial accelerations. For the preliminary study, a piece of Silastic was adhered to each of the 3 common areas of thrombus formation inside the pump. The results provided baseline information to speculate on the possibility of detecting thrombus formation by vibration signal changes. For the next studies, fresh bovine blood was harvested under sterile conditions and with strict avoidance of air contact, adding 1.0 U/ml of heparin. The sterilized test circuit consisted of 3/8 inch tubing (Tygon) and a soft reservoir. During the operating time, the activated clotting time (ACT) was maintained between 150 to 300 s using protamin. A restrictor on the outflow tube maintained the flow rates at about 4.5 L/min. The pumps ran continuously for 6 h. Possible blood clot formation inside the pump was monitored by observing the vibration signal from the device for 6 h. These studies revealed that it was possible to distinguish between an impeller that did not form thrombus and ones that formed fibrogenous thrombus using vibration signal assessment. Vibration assessment is worthwhile as a thrombus monitoring tool for a centrifugal blood pump.

Development and initial testing of a permanently implantable centrifugal pump

To be able to salvage heart failure patients, the need for an economical permanent ventricular assist device is increasing. To meet this increasing demand, a miniaturized centrifugal blood pump has been developed as a permanently implantable device. The Gyro permanently implantable model (PI-601) incorporates a sealless design with a blood stagnation free structure. The pump impeller is magnetically coupled to the driver magnet in a sealless manner. This pump is atraumatic and antithrombogenic and incorporates a double pivot bearing system. A miniaturized actuator was utilized in this system in collaboration with the University of Vienna. The priming volume of this pump is 20 ml. The overall size of the pump actuator package is 53 mm in height and 65 mm in diameter, 145 ml of displacement volume, and 305 g in weight. Testing to date has included in vitro hydraulic performance and hemolysis. This pump can provide 5 L/min against a 110 mm Hg total pressure head at 2,000 rpm and 8 L/min against 150 mm Hg at 2,500 rpm. The normalized index of hemolysis (NIH) value of this pump was 0.0028 g/100 L at 5 L/min against 100 mm Hg. A preliminary anatomical study revealed the possibility of the implantability of 2 such systems in biventricular bypass at a preperitoneal location. This system is feasible for use as a permanently implantable biventricular assist device.

Comparison of the Gyro C1E3 and BioMedicus centrifugal pump performances during cardiopulmonary bypass

The compact eccentric inlet port (C1E3) centrifugal blood pump was developed as a cardiopulmonary bypass (CPB) pump. The C1E3 pump incorporated a sealless design with a blood stagnation free structure. The pump impeller was magnetically coupled to the driver magnet in a sealless manner. To develop an atraumatic and antithrombogenic centrifugal pump without a shaft seal junction, a double pivot bearing system was introduced. Recently, a mass production model of the C1E3 was fabricated and evaluated. The ratio of the normalized index of hemolysis (NIH) of the C1E3 was 0.007 g/ 100 L, in comparison to the NIH of the BP-80, 0.018 g/ 100 L, each in a CPB condition of 5 L/min against 325 mm Hg. Both pumps were compared in identical in vitro circuits. To further evaluate the pumps during cardiopulmonary bypass for reliability and function, 6 h of CPB was performed on each of 8 bovines using either the C1E3 or BP-80 centrifugal pump. The BP-80 and C1E3 provided pump flows of 50-60 ml/kg/min without incident. The hemodynamics were stable, and the hematology and biochemistry data were within normal ranges. There were no statistically significant differences between the 2 groups. Concerning the plasma free hemoglobin values, a mass production model of the C1E3 pump had the same hemolysis levels as the BP-80. Our preliminary studies reveal that the C1E3 pump is reliable. Also, the C1E3 will satisfy clinical requirements as a cardiopulmonary bypass pump.

The hemolysis test of the Gyro C1E3 pump in pulsatile mode

While a centrifugal pump is generally used for nonpulsatile blood flow, it can also produce a pulsatile flow by alternating the impeller rotational speed (rpm) periodically. However, there is a concern that this centrifugal pump pulsatile mode may induce added hemolysis as a result of the repeated acceleration and deceleration of rpm. Thus, a hemolysis study of the pulsatile modes of the Gyro C1E3 centrifugal pump (Gyro-P) was conducted. The results were then compared with the nonpulsatile mode of the same pump (Gyro-N) and the nonpulsatile BioMedicus BP-80 (Bio-N) pump. Three different conditions were simulated: left ventricular assist device (LVAD), cardiopulmonary bypass (CPB), and percutaneous cardiopulmonary support (PCPS). The beating rate of the Gyro-P was set at 40 bpm, with repetition of two different impeller speed (the lower being 70% of the higher speed). The 2 impeller speeds were set to obtain the same average flow as that of the nonpulsatile mode. The hemolysis results of the Gyro-P were comparable to or better than those of Bio-N, and no excessive hemolysis was observed, compared to the Gyro-N. In conclusion, The Gyro-P had an excellent hemolytic characteristic and generated no excessive hemolysis in most clinical usage conditions. With the concern of hemolysis eliminated, this pulsatile mode may have various possible mode advantages.

Hemolytic effect of surface roughness of an impeller in a centrifugal blood pump

The present study investigates how the surface roughness of an impeller affects hemolysis in the pivot bearing supported Gyro C1E3 pump. This study focuses on particular areas of the impeller surface in the impeller type centrifugal pump. Seven Gyro C1E3 pumps were prepared with smooth surface housings and different impeller parts with different surface roughnesses. The vanes, top side, and backside of the impeller were independently subjected to vapor polishing, fine sand blasting, or coarse sand blasting to produce three different grades of surface roughness. These surfaces were then examined by a surface profile instrument. Using these pumps with different impellers, in vitro hemolysis tests were performed simulating cardiopulmonary bypass (5 L/min, 350 mm Hg). The findings of this study conclusively proved that surface roughness of the back side of the impeller has the greatest effect on hemolysis, followed by the top side and then the vanes. The following are reasons for these findings. First, the shear rate may be greater on the back side than on the top side because of the smaller gap between the back and the housing and the greater relative speed against the impeller. Second, the fluid beneath the impeller may have a longer exposure time because there is little chance for the fluid to mix beneath the impeller. Third, the shear rate may be greater on the top side of the impeller than on the vanes because a vortex formation occurs behind the vanes.

Fiber-optic-based biomonitoring of benzene derivatives by recombinant E. coli bearing luciferase gene-fused TOL-plasmid immobilized on the fiber-optic end

TOL plasmid in Pseudomonas putida mt-2 has a series of genes for the degradation of xylene, toluene, and their derivatives to pyruvate and acetaldehyde (or propionaldehyde). Two operons, i.e., upper operon and meta operon, play indispensable roles for the digestion of xylene derivatives: When XyIR protein recognizes xylene derivatives, another controlling gene, xyIS, is activated, which results in the activation of meta operon. Therefore, we have constructed a fusion gene between TOL plasmid and the firefly luciferase gene under the control of XyIR and the promoter of xyIS gene; i.e., by using fusions of the meta operon with promotorless luciferase expression vector from firefly, we have constructed and tested biomonitors for benzene derivatives. Bioluminescence specified by Escherichia coli (pTSN316), carrying xyIR and xyIS promoters, Ampr and luc, was measured in either a benzene derivative-saturated or o-methylbenzyl alcohol-dissolved medium both in the case of cell suspension and in the case of immobilized cell form. The utility of the biosensing system for monitoring in chemical plant drainage was demonstrated with samples supplemented with benzene derivatives. The xyIR-xyIS promoter-lux fusion carried by pTSN316 responded to a benzene-related chemical in sample solutions. Immobilization of the transformed E. coli, at one end of fiber optic, bearing firefly luciferase gene fused to TOL plasmid, has been demonstrated to fabricate a luminescent remote biomonitoring device for the protection of environmental deterioration. Due to the luminescent detection, the detection limits for benzene-related aromatics that are recognized by a binding protein (XyIR) were parts-per-million. We had already submitted a preliminary report concerning the possibility of environmental monitoring based on the above idea by using the transformed E. coli in a cell-suspended solution. This paper describes mainly a fiber-optic-based biomonitoring device for the protection of environmental deterioration.

p53 accumulation and apoptosis in embolized meningiomas

Preoperative embolization of meningiomas is performed to decrease blood loss at surgery. While it is also expected to reduce tumor recurrence by producing necrosis at the site of dural attachment, very little has been described about what happens to the non-necrotic tumor cells. We investigated how the proliferative activities of meningiomas were modified after embolization. In nine meningiomas which were embolized preoperatively, proliferative potentials and expression of cell cycle inhibitors were assessed immunohistochemically using MIB-1, anti-53 (DO-1 and DO-7), and anti-p21 (WAF1/CIP1) monoclonal antibodies. To determine whether a cell underwent apoptotic death besides necrosis, we applied the terminal deoxynucleotidyl transferase-mediated dUTP-digoxigenin nick end labeling method. Results were compared with control meningiomas without embolization. MIB-1 positive cells often gathered in perinecrotic areas, although the mean MIB-1 staining index of the embolized meningiomas was not significantly different from the control. p53 and its downstream effector p21 accumulated mainly in the perinecrotic areas in eight of the nine embolized meningiomas. Apoptosis was also observed in the concomitant areas. Double staining for both MIB-1 and p21 frequently showed positive cells for both antibodies. The accumulation of MIB-1 positive cells in the embolized meningiomas may not be a sign of fast growth or malignancy, but it may implicate arrest of cell cycle by the p21. This study indicates that embolized meningiomas exhibit not only necrosis but also apoptosis and cell cycle arrest. The latter effects appear to be at least partly p53 dependent.

Efficient harvest of in vivo IL-2-activated CD3+ lymphocytes for adoptive immunotherapy by selective leukapheresis (lymphocytapheresis)

Autologous activated lymphocytes are an alternative to tumor-infiltrating lymphocytes for adoptive immunotherapy. We developed a method of selective lymphocytapheresis that harvests large numbers of interleukin-2 (IL-2)-activated autologous T lymphocytes. Five patients with metastatic malignant melanoma received 2.4 x 10(6) IU/m2 IL-2 sc. once a day 5 days a week for 3 weeks before lymphocytapheresis. Four patients went through lymphocytapheresis without IL-2 pretreatment. After IL-2 pretreatment, activated memory T cells increased significantly. Increasing CD3+ cells paralleled the significant enhancement of the cytotoxic activity against an HLA-A2-matched allogeneic melanoma cell line during the 3 weeks of IL-2 pretreatment. Lymphocytapheresis was performed 72 h after the last IL-2 injection to obtain the maximum recovery of activated lymphocytes at the peak of the rebound phenomenon. IL-2 pretreatment resulted in many more lymphocytes in the harvest than without pretreatment. The percentage, number, and lytic units of CD3+ cells harvested by the differential apheresis were significantly higher than were present in peripheral blood before lymphocytapheresis. These results show that pretreatment of melanoma patients with low-dose IL-2 before lymphocytapheresis allows the selective harvest of large numbers of activated T lymphocytes for adoptive immunotherapy.

In vitro thrombogenic evaluation of centrifugal pumps

One of the major considerations in the development of a circulatory assist device is its antithrombogenecity. Although the precise evaluation should be accomplished by in vivo tests, these tests are costly and require a relatively long period. In this study, we established a simple in vitro test and assessed feasibility using 2 clinically available centrifugal pumps, the BioMedicus and Nikkiso pumps. Two identical mock loops were fabricated, and fresh heparinized human blood (activated clotting time of 150-250 s) was circulated at 5 L/min against a total pressure head of 100 mm Hg. After 3 h of pumping, only the BioMedicus pumps had thrombi while the Nikkiso pumps were thrombus free. Following 6 h of pumping, thrombi were observed in both pumps. Clotting patterns and locations were reproducible in each pump and similar to the results of clinical or ex vivo studies. This simple in vitro test was considered to be feasible as a pilot study, particularly to predict thrombogenic sites.

Hemolytic effects of surface roughness of a pump housing in a centrifugal blood pump

The surface roughness of artificial blood contacting devices is an important surface property that is closely related to blood cell trauma. The present study investigated the effect of the surface roughness of a pump housing on hemolysis in an impeller-type centrifugal blood pump, a pivot bearing supported Gyro C1E3 pump. The purpose of the study was to determine which part of a housing has the greatest surface roughness effect on hemolysis in a centrifugal pump. Seven Gyro C1E3 pumps were prepared, each with a smooth surface impeller and a housing with differing areas of altered surface roughness. Both top and bottom housings were divided into half subregions, each with the same area. Seven test pumps were produced by subjecting various subregions of the housings to vapor polishing and sandblasting. The treated surfaces were then examined by a surface profile instrument. Using these 7 pumps with different areas of altered housing roughness, in vitro hemolysis tests were performed simulating cardiopulmonary bypass (5 L/min, 350 mm Hg). The results of this study are as follows. First, the surface roughness of the top housing had a greater effect on hemolysis than that of the bottom housing. Second, on the surface of the top housing, the surface roughness of the outer half area had a greater effect on hemolysis than that of the inner half area. Third, on the surface of the bottom housing, the surface roughness of the inner half area had a greater effect on hemolysis than that of the outer half area. These findings concur with previous studies of flow patterns in pumps. Thus, it is expected that the method in this study, comparative in vitro hemolysis tests of the pumps with surfaces of the same roughness but different locations, can be used to detect the high shear area inside a pump.

Urease-independent chemotactic responses of Helicobacter pylori to urea, urease inhibitors, and sodium bicarbonate

Helicobacter pylori CPY3401 and an isogenic urease-negative mutant, HPT73, showed chemotactic responses to urea, flurofamide (a potent urease inhibitor), and sodium bicarbonate. Since urea and sodium bicarbonate are secreted through the gastric epithelial surface and hydrolysis of urea by urease on the bacterial surface is essential for colonization, the chemotactic response of H. pylori may be crucial for its colonization and persistence in the stomach.

Vibration assessment for thrombus formation in the centrifugal pump

To clarify the correlation of vibration and thrombus formation inside a rotary blood pump, 40 preliminary vibration studies were performed on pivot bearing centrifugal pumps. No such studies were found in the literature. The primary data acquisition equipment included an accelerometer (Isotron PE accelerometer, ENDEVCO, San Juan Capistrano, CA, U.S.A.), digitizing oscilloscope (TDS 420, Tektronix Inc., Pittsfield, MA, U.S.A.), and pivot bearing centrifugal pumps. The pump impeller was coupled magnetically to the driver magnet. The accelerometer was mounted on the top of the pump casing to sense radial and axial accelerations. To simulate the 3 common areas of thrombus formation, a piece of silicone rubber was attached to each of the following 3 locations as described: a circular shape on the center bottom of the impeller (CI), an eccentric shape on the bottom of the impeller (EI), and a circular shape on the center bottom casing (CC). A fast Fourier transform (FFT) method at 5 L/min against 100 mm Hg, with a pump rotating speed of 1,600 rpm was used. The frequency response of the vibration sensors used spans of 40 Hz to 2 kHz. The frequency domain was already integrated into the oscilloscope, allowing for comparison of the vibration results. The area of frequency domain at a radial direction was 206 +/- 12.7 mVHz in CI, 239.5 +/- 12.1 mVHz in EI, 365 +/- 12.9 mVHz in CC, and 163 +/- 7.9 mVHz in the control (control vs. CI p = 0.07, control vs. EI p < 0.001, control vs. CC p < 0.001, EI vs. CC p < 0.001, CI vs. CC p < 0.001). Three types of imitation thrombus formations were roughly distinguishable. These results suggested the possibility of detecting thrombus formation using vibration signals, and these studies revealed the usefulness of vibration monitoring to detect thrombus formation in a centrifugal pump.

A pivot bearing-supported centrifugal pump for a long-term assist heart

A pivot bearing-supported centrifugal blood pump has been developed. It is a compact, cost effective, and anti-thrombogenic pump with anatomical compatibility. A preliminary evaluation of five paracorporeal left ventricular assist studies were performed on pre-conditioned bovine (70-100 kg), without cardiopulmonary bypass and aortic cross-clamping. The inflow cannula was inserted into the left ventricle (LV) through the apex and the outflow cannula affixed with a Dacron vascular graft was anastomosed to the descending aorta. All pumps demonstrated trouble free performance over a two-week screening period. Among these five studies, three implantations were subjected for one month system validation studies. All the devices were trouble free for longer than 1 month. (35, 34, and 31 days). After achieving one month studies, all experiments were terminated. There was no evidence of device induced thrombus formation inside the pump. The plasma free hemoglobin levels were within normal ranges throughout all experiments. As a consequence of these studies, a mass production model C1E3 of this pump was fabricated as a short-term assist pump. This pump has a Normalized Index of Hemolysis of 0.0007 mg/100L and the estimated wear life of the impeller bearings is longer than 8 years. The C1E3 will meet the clinical requirements as a cardiopulmonary bypass pump. For the next step, a miniaturized pivot bearing centrifugal blood pump P1-601 has been developed for use as a permanently implantable device after design optimization. The evolution from C1E3 to the PI-601 converts this pivot bearing centrifugal pump as a totally implantable centrifugal pump. A pivot bearing centrifugal pump will become an ideal assist pump for the patients with failing heart.

Angiotensin converting enzyme inhibitors suppress production of tumor necrosis factor-alpha in vitro and in vivo

It has been reported that angiotensin converting enzyme (ACE) inhibitors have beneficial effects on insulin resistance and congestive heart failure, in which elevations of serum tumor necrosis factor-alpha (TNF-alpha) level have been indicated. Therefore, in this study, we examined effect of ACE inhibitors on TNF-alpha production both in vitro and in vivo by using human blood mononuclear cells and mice, respectively. LPS (20 micrograms/ml)-induced in vitro TNF-alpha production, measured by bioassay and enzyme-linked immunosorbent assay, was significantly inhibited with captopril, delapril and cilazapril in a concentration of 10(-3) mol/l. A single, oral administration of captopril, delapril and cilazapril at more than 10-fold doses of common clinical use in man significantly inhibited LPS (2 mg/kg)-induced serum TNF-alpha activity in Balb/c mice. These results indicate that ACE inhibitors such as captopril, delapril and cilazapril have an inhibitory effect on TNF-alpha production not only in vitro as previously reported, but also in vivo, although relatively high concentrations and large doses were required in this study.

Urease-independent chemotactic responses of Helicobacter pylori to urea, urease inhibitors, and sodium bicarbonate

Helicobacter pylori CPY3401 and an isogenic urease-negative mutant, HPT73, showed chemotactic responses to urea, flurofamide (a potent urease inhibitor), and sodium bicarbonate. Since urea and sodium bicarbonate are secreted through the gastric epithelial surface and hydrolysis of urea by urease on the bacterial surface is essential for colonization, the chemotactic response of H. pylori may be crucial for its colonization and persistence in the stomach.

Eccentric inlet port of the pivot bearing supported Gyro centrifugal pump

An eccentric inlet port is a unique feature of the pivot bearing supported Gyro Compact-1 Eccentric Inlet Port Model 3 (C1E3) centrifugal pump, a completely sealless centrifugal pump. The latest C1E3 has an eccentric inlet port with a 30 degree vertical angle. To investigate the adequacy of this 30 degree angle, flow visualization studies and in vitro hemolysis tests were performed, comparing 4 pumps, each with a different angle of the eccentric inlet port (0, 30, 60, and 90 degrees). The flow visualization study utilizing a tracer method focused on the flow pattern just distal to the inlet port of each pump, and each pump was operated at 5 L/min against 100 mm Hg and 5 L/min against 350 mm Hg. In the pumps with angles of 90 and 60 degrees, the flow direction changed horizontally, causing a vortex formation. In the pump with the 30 degree angle, the inflow did not change its course, resulting in minimal space for vortex formation. In the pump with the 0 degree angle, the inflow collided with the pump housing, resulting in a small vortex formation along the housing surface. The in vitro hemolysis tests at 5 L/min against 350 mm Hg revealed that the pump with the 30 degree angle was the least hemolytic and the pump with the 90 degree angle was the most hemolytic among the 4 pumps. These results suggest that the angle of the eccentric inlet port of the Gyro C1E3 pump should be 30 degrees to have less vortex formation and less red blood cell trauma.

Effect of long-term treatment with complete Freund's adjuvant on KK-Ay mouse, a model of non-insulin-dependent diabetes mellitus

Nonspecific stimulation with immunoadjuvants significantly improves glucose tolerance in animal models for non-insulin-dependent diabetes mellitus (NIDDM). In this study, we observed the effect of long-term treatment with complete Freund's adjuvant (CFA) on serum factors and histology of various organs in KK-Ay mice with NIDDM. The mice were injected with CFA weekly or every 2 weeks for 12 weeks. Glucose tolerance was significantly improved in the CFA-treated mice throughout the experiment. At the end of the experiment, hypertriglyceridemia was significantly reduced, but serum total protein, glutamic pyruvic transaminase, creatinine, and nonfasting insulin levels were not changed by the treatment. Fatty change of the liver and index of glomerular lesions of the kidney were significantly inhibited in the CFA-treated mice, whereas the pancreatic islet morphology remained unchanged. No toxic effect was observed by the CFA treatment. These results imply that the novel treatment with CFA could control NIDDM and inhibit the development of diabetic glomerular lesions in KK-Ay mice.

A selective pulmonary thrombosis associated with sepsis-induced disseminated intravascular coagulation

Disseminated intravascular coagulation (DIC) is a pathologic condition associated with critical illnesses, including sepsis. Recent studies have suggested that endogenous cytokines and leukocytes are involved in major roles of its pathophysiology. We report a case of sepsis-induced DIC due to pneumonia that was associated with diffuse and selective thrombosis in pulmonary arteries, yielding to sudden death from pulmonary massive embolism. This report suggests that the selective and lethal pulmonary thromboembolism progresses under the standard therapies in sepsis-induced DIC.

Material of the double pivot bearing system in the Gyro C1E3 centrifugal pump

A double pivot bearing system is adopted for the Gyro C1E3 centrifugal blood pump to achieve a completely sealless structure that prevents blood leakage and thrombus formation around the shaft. The double pivot bearing system is also a critical factor for blood trauma and durability of the C1E3 pump. This study focuses on the double pivot bearing material. The pump with the male ceramic and female polyethylene pivots (PE) was compared with the pump with the male ceramic and female ceramic pivots (CRM), pertaining to stability of the impeller spinning motion, hemolysis, and durability. At first, the wear rate of the pivots was recorded after operating the pumps in various rotational speeds. As for hemolysis, in vitro tests were carried out using fresh bovine blood in 2 conditions (5 L/min, 350 mm Hg and 5 L/min, 100 mm Hg). Then, stability of the spinning motion was investigated by evaluating the vibration of the pump. The two pumps with different female pivots were operated identically at 2,700 rpm, and the vibration signals were measured using an accelerometer that was mounted on the top of the pump housing. The following findings were obtained in this study. The wear sites were different between the PE and CRM. Most of the wear occurred at the top female polyethylene pivot in the PE. In contrast, most of the wear occurred at the top male ceramic pivot in the CRM. In addition, the amount of the initial wear was less and the wear rate was lower in the PE than in the CRM. The hemolysis caused by the PE was less than the hemolysis caused by the CRM. The vibration signals of the PE had less amplitude and a narrower range of frequency than the vibration signals of the CRM. In conclusion, the combination of materials male ceramic-female polyethylene are superior to the male ceramic-female ceramic for the double pivot bearing system of the Gyro C1E3 centrifugal pump because of less vibration, less hemolysis, and less wear.

Severe chest pain due to gastric anisakiasis

We treated two cases of gastric anisakiasis presenting with severe chest pain. In both cases, there was a history of prior ingestion of raw saltwater fish. After endoscopic removal of larvae, the chest pain disappeared and never recurred. Other diseases causing chest pain were ruled out by symptoms, signs, blood tests, electrocardiography, chest radiograph, and ultrasonic examination of the heart and abdomen. Thus the chest pain was considered to be caused by gastric anisakiasis. Gastric anisakiasis should be included in the differential diagnosis of acute chest pain.

Complexity of expression of the intermediate filaments of six new human ovarian carcinoma cell lines: new expression of cytokeratin 20

Six permanent human ovarian carcinoma cell lines (OVISE, OVTOKO, OVMANA and OVSAYO from clear cell adenocarcinoma, and OVSAHO and OVKATE from serous papillary adenocarcinoma) were established from solid tumours. The cell lines have been in culture for 5-8 years, the passage number varying from 62 to 246. Immunohistochemical analysis has shown that five of the six cell lines express at least six cytokeratin (CK) polypeptides. OVISE and OVSAYO expressed CKs 6, 7, 8, 18, 19 and 15 and/or 16. OVTOKO was positive for CKs 7, 8, 18, 19 and 15 and/or 16. OVSAHO expressed CKs 6, 7, 8, 14, 18, 19 and 15 and/or 16. OVMANA expressed CKs 6, 7, 8, 18, 19, 20 and 15 and/or 16. OVKATE expressed CKs 6, 7, 8, 13, 17, 18, 19, 20 and 15 and/or 16. The expression of CK7, additional expression of vimentin, and clinical and histopathological findings enabled us to confirm that six cell lines had been established from primary ovarian cancers. Two of the six cell lines were positive for CK20, although CK20 was not expressed in the original tumours. The heterotransplanted tumours produced by CK20-positive cells also expressed CK20. This is the first report of ovarian carcinoma cell lines that express CK20 irrespective of their histological type. CK20 has been found in all colon carcinoma cell lines, but only in the mucinous type of ovarian tumours. These new ovarian carcinoma cell lines will therefore provide a relevant experimental system for elucidating the regulatory control mechanisms of intermediate filament expression.