[Acupuncture for treatment of tobacco withdrawal syndrome: systematic review and Meta-analysis]

OBJECTIVE

To systematically review the efficacy of acupuncture for the treatment of tobacco withdrawal syndrome.

METHODS

The randomized controlled trials (RCTs) regarding acupuncture for treatment of tobacco withdrawal syndrome were searched in CNKI, Wanfang, VIP, SinoMed, PubMed, Cochrane, Medline and EMbase databases. The search period was from January 1st of 2011 to December 31st of 2021. After data extraction and bias risk assessment of the included literature, the Meta-analysis was performed using RevMan5.4.1 software.

RESULTS

Totally 23 RCTs were included, including 2 120 patients. The Meta-analysis results showed that compared with medication, acupuncture showed no significant difference at improving Fagerström test for nicotine dependence (FTND) score (MD=0.16, 95%CI: -0.08, 0.41), heaviness of smoking index (HSI) score (MD=0.11, 95%CI: -0.13, 0.36), Minnesota nicotine withdrawal scale (MNWS) score (MD=0.12, 95%CI: -0.11, 1.35), questionnaire of smoking urges (QSU) score (MD=-0.30, 95%CI: -2.78, 2.18), Hamilton depression scale (HAMD) score (MD=0.76, 95%CI: -1.54, 3.06), abstinence rate (RR=0.95, 95% CI: 0.82, 1.10) and effective rate (RR=1.01, 95%CI: 0.95, 1.07). Acupuncture was superior to sham acupuncture in reducing MNWS score (MD=-4.88, 95%CI: -5.21, -4.55, P<0.000 01). Acupuncture was superior to cognitive behavioral therapy in reducing FTND score (MD=-1.41, 95%CI: -1.74, -1.08), MNWS score (MD=-4.28, 95%CI: -5.31, -3.25) and increasing abstinence rate (RR=2.19, 95%CI: 1.39, 3.45, P<0.000 01, P<0.001).

CONCLUSION

Acupuncture could effectively improve tobacco withdrawal syndrome, increase abstinence rate and effective rate. Limited by the quantity and quality of the included studies, this conclusion needs to be verified by more studies.

Direction Selectivity of TmY Neurites in Drosophila

The perception of motion is an important function of vision. Neural wiring diagrams for extracting directional information have been obtained by connectome reconstruction. Direction selectivity in Drosophila is thought to originate in T4/T5 neurons through integrating inputs with different temporal filtering properties. Through genetic screening based on synaptic distribution, we isolated a new type of TmY neuron, termed TmY-ds, that form reciprocal synaptic connections with T4/T5 neurons. Its neurites responded to grating motion along the four cardinal directions and showed a variety of direction selectivity. Intriguingly, its direction selectivity originated from temporal filtering neurons rather than T4/T5. Genetic silencing and activation experiments showed that TmY-ds neurons are functionally upstream of T4/T5. Our results suggest that direction selectivity is generated in a tripartite circuit formed among these three neurons-temporal filtering, TmY-ds, and T4/T5 neurons, in which TmY-ds plays a role in the enhancement of direction selectivity in T4/T5 neurons.

Radiomics model and clinical scale for the preoperative diagnosis of silent corticotroph adenomas

OBJECTIVE

Silent corticotroph adenomas (SCAs) are a subtype of nonfunctioning pituitary adenomas that exhibit more aggressive behavior. However, rapid and accurate preoperative diagnostic methods are currently lacking.

DESIGN

The purpose of this study was to examine the differences between SCA and non-SCA features and to establish radiomics models and a clinical scale for rapid and accurate prediction.

METHODS

A total of 260 patients (72 SCAs vs. 188 NSCAs) with nonfunctioning adenomas from Peking Union Medical College Hospital were enrolled in the study as the internal dataset. Thirty-five patients (6 SCAs vs. 29 NSCAs) from Fuzhou General Hospital were enrolled as the external dataset. Radiomics models and an SCA scale to preoperatively diagnose SCAs were established based on MR images and clinical features.

RESULTS

There were more female patients (internal dataset: p < 0.001; external dataset: p = 0.028) and more multiple microcystic changes (internal dataset: p < 0.001; external dataset: p = 0.012) in the SCA group. MRI showed more invasiveness (higher Knosp grades, p ≤ 0.001). The radiomics model achieved AUCs of 0.931 and 0.937 in the internal and external datasets, respectively. The clinical scale achieved an AUC of 0.877 and a sensitivity of 0.952 in the internal dataset and an AUC of 0.899 and a sensitivity of 1.0 in the external dataset.

CONCLUSIONS

Based on clinical information and imaging characteristics, the constructed radiomics model achieved high preoperative diagnostic ability. The SCA scale achieved the purpose of rapidity and practicality while ensuring sensitivity, which is conducive to simplifying clinical work.

Extrusion-based 3D printing of biodegradable, osteogenic, paramagnetic, and porous FeMn-akermanite bone substitutes

The development of biodegradable Fe-based bone implants has rapidly progressed in recent years. Most of the challenges encountered in developing such implants have been tackled individually or in combination using additive manufacturing technologies. Yet not all the challenges have been overcome. Herein, we present porous FeMn-akermanite composite scaffolds fabricated by extrusion-based 3D printing to address the unmet clinical needs associated with Fe-based biomaterials for bone regeneration, including low biodegradation rate, MRI-incompatibility, mechanical properties, and limited bioactivity. In this research, we developed inks containing Fe, 35 wt% Mn, and 20 or 30 vol% akermanite powder mixtures. 3D printing was optimized together with the debinding and sintering steps to obtain scaffolds with interconnected porosity of 69%. The Fe-matrix in the composites contained the γ-FeMn phase as well as nesosilicate phases. The former made the composites paramagnetic and, thus, MRI-friendly. The in vitro biodegradation rates of the composites with 20 and 30 vol% akermanite were respectively 0.24 and 0.27 mm/y, falling within the ideal range of biodegradation rates for bone substitution. The yield strengths of the porous composites stayed within the range of the values of the trabecular bone, despite in vitro biodegradation for 28 d. All the composite scaffolds favored the adhesion, proliferation, and osteogenic differentiation of preosteoblasts, as revealed by Runx2 assay. Moreover, osteopontin was detected in the extracellular matrix of cells on the scaffolds. Altogether, these results demonstrate the remarkable potential of these composites in fulfilling the requirements of porous biodegradable bone substitutes, motivating future in vivo research. STATEMENT OF SIGNIFICANCE: We developed FeMn-akermanite composite scaffolds by taking advantage of the multi-material capacity of extrusion-based 3D printing. Our results demonstrated that the FeMn-akermanite scaffolds showed an exceptional performance in fulfilling all the requirements for bone substitution in vitro, i.e., a sufficient biodegradation rate, having mechanical properties in the range of trabecular bone even after 4 weeks biodegradation, paramagnetic, cytocompatible and most importantly osteogenic. Our results encourage further research on Fe-based bone implants in in vivo.

Protective effects of oridonin against osteoporosis by regulating immunity and activating the Wnt3a/β-catenin/VEGF pathway in ovariectomized mice

This study was performed with the aim of investigating the effect of oridonin (ORI) on estrogen deprivation-induced osteoporosis in mice and its mechanism. Animal experiments were used in this work to validate the anti-osteoporotic efficacy of ORI. Morphometric analysis was performed by micro-CT. A special protein meter was used to detect the content of immunoglobulin lgM, immunoglobulin lgG, complement C3 and C4 in the serum of mice. The expression of CD4⁺CD25⁺Foxp3⁺ Treg cell and CD4⁺/CD8⁺ lymphocyte subsets in mice was detected by flow cytometry. ELISA was used to detect the content of insulin-like growth factor (IGF-1), tumor necrosis factor (TNF-α), interleukin-1 (IL-1) and interleukin-6 (IL-6). In addition, key signaling molecules in the Wnt3a/β-catenin signaling pathway were detected by Western blotting. The results showed that compared with the model group, the contents of calcium and phosphorus in the femurs of mice in the ORI groups were increased, and the spleen coefficient was decreased. The ALP activity in the serum of mice in the high and medium dose ORI groups was decreased, and the uterine coefficient was increased. ORI significantly increased the maximum bending load and the maximum bending stress of the femurs of mice, increased the number of trabeculae, and repaired the bone microstructure. At the same time, ORI could significantly increase the levels of immunoglobulin (lgG and lgM) and complement (C3 and C4), increase the activity of peritoneal macrophages in mice, increase the expression of CD4⁺CD25⁺Foxp3⁺ Tregs and CD4⁺/CD8⁺ in the spleen, increase the content of IGF-1, reduce the content of TNF-α, IL-1 and IL-6 and increase the expression levels of VEGF, Wnt3a, p-GSK3β/GSK3β and β-catenin/Lamin in the femoral tissue. These results indicated that ORI might regulate the expression of VEGF through the Wnt3a/β-catenin signaling pathway, improve the immunity of mice, maintain the balance of the immune system, and promote angiogenesis, thereby improving the bone mineral density and bone tissue morphology of mice and playing an anti-osteoporotic role.

Multiple Gas Seepage Mechanisms and Production Development Research for Shale Gas Reservoirs from Experimental Techniques and Theoretical Models

Shale gas seepage theory provides a scientific basis for dynamically analyzing the physical gas flow processes involved in shale gas extraction and for estimating shale gas production. Conventional experimental techniques and theoretical methods applied in seepage research are unable to accurately illustrate shale gas mass transfer processes at the micro- and nanoscale. In view of these scientific issues, the knowledge of seepage mechanisms and production development design was improved from the perspective of experimental techniques and theoretical models in the paper. First, multiple techniques (e.g., focused ion beam scanning electron microscopy and a combination of mercury intrusion porosimetry and adsorption measurement techniques) were integrated to characterize the micro- and nanopore distribution in shales. Then, molecular dynamics simulations were carried out to analyze the microscale distribution of gas molecules in nanopores. In addition, an upscaled gas flow model for the shale matrix was developed based on molecular dynamics simulations. Finally, the coupled flow and productivity models were set up according to a long-term production physical simulation to identify the production patterns for adsorbed and free gas. The research results show that micropores (diameter: <2 nm) and mesopores (diameter: 2-50 nm) account for more than 70% of all the pores in shales and that they are the primary space hosting adsorbed gas. Molecular simulations reveal that microscopic adsorption layers in organic matter nanopores can be as thick as 0.7 nm and that desorption and diffusion are the main mechanisms behind the migration of gas molecules. An apparent permeability model that comprehensively accounts for adsorption, diffusion, and seepage was developed to address the deficiency of Darcy's law in characterizing gas flowability in shale reservoirs. The productivity model results for a certain gas well show that the production in the first three years accounts for more than 50% of its estimated ultimate recovery and that adsorbed gas contributes more to the annual production than free gas in the eighth year. These research results provide theoretical and technical support for improving the theoretical understanding of shale gas seepage and optimizing shale gas extraction techniques in China.

Dual-prodrug cascade activation for chemo/chemodynamic mutually beneficial combination cancer therapy

The combination of chemodynamic therapy (CDT) and chemotherapy has shown promise for achieving improved cancer treatment outcomes. However, due to the lack of synergy rationale, a simple one-plus-one combination therapy remains suboptimal in overcoming the obstacles of each treatment approach. Herein, we report a nanoplatform consisting of a pH-sensitive ferrocene- and cinnamaldehyde-based polyprodrug and a hydrogen peroxide-responsive doxorubicin (DOX) prodrug. Under an acidic tumor environment, the cinnamaldehyde polyprodrug will be activated to release free cinnamaldehyde, which can increase the intracellular hydrogen peroxide level and enhance the Fenton reaction. Subsequently, due to the collapse of nanoparticle structures, the DOX prodrug will be released and activated under a hydrogen peroxide stimulus. Meanwhile, the quinone methide produced during DOX prodrug activation can consume glutathione, an important antioxidant, and thus in turn enhance the efficacy of CDT. This design of a nanoplatform with dual-prodrug cascade activation provides a promising mutually beneficial cooperation mode between chemotherapy and CDT for enhancing antitumor efficacy.

Resolution and uniformity improvement of parallel confocal microscopy based on microlens arrays and a spatial light modulator

In traditional fluorescence microscopy, it is hard to achieve a large uniform imaging field with high resolution. In this manuscript, we developed a confocal fluorescence microscope combining the microlens array with spatial light modulator to address this issue. In our system, a multi-spot array generated by a spatial light modulator passes through the microlens array to form an optical probe array. Then multi-spot adaptive pixel-reassignment method for image scanning microscopy (MAPR-ISM) will be introduced in this parallelized imaging to improve spatial resolution. To generate a uniform image, we employ an optimized double weighted Gerchberg-Saxton algorithm (ODWGS) using signal feedback from the camera. We have built a prototype system with a FOV of 3.5 mm × 3.5 mm illuminated by 2500 confocal points. The system provides a lateral resolution of ∼0.82 µm with ∼1.6 times resolution enhancement after ISM processing. And the nonuniformity across the whole imaging field is 3%. Experimental results of fluorescent beads, mouse brain slices and melanoma slices are presented to validate the applicability and effectiveness of our system.

Corrosion Behavior of Magnesium Potassium Phosphate Cement under Wet-Dry Cycle and Sulfate Attack

This paper investigated the influence of dry-wet cycles and sulfate attack on the performance of magnesium potassium phosphate cement (MKPC) as well as the effect of waterglass on MKPC. X-ray diffraction (XRD), TG-DTG, and scanning electron microscopy (SEM-EDS) were used to examine the phase composition and microstructure of MKPC. The results showed that the flexural and compressive strength of an MKPC paste increased initially and subsequently decreased in different erosion environments. The final strength of the M0 paste exposed to the SK-II environment was the highest, while that of the M0 paste exposed to the DW-II environment was the lowest. The final volume expansion value of MKPC specimens under four corrosion conditions decreased in the following order: DW-II, M0 > SK-II, M0 > DW-II, M1 > SK-I, M0 > DW-I, M0. Compared to the full-soaking environment, the dry-wet cycles accelerated sulfate erosion and the appearance of damages in the macro and micro structure of the MKPC paste. With the increase in the number of the dry and wet cycles, more intrinsic micro-cracks were observed, and the dissolution of hydration products was accelerated. Under the same number of dry-wet cycles, the strength test and volume stability test showed that the durability in a Na₂SO₄ solution of the MKPC paste prepared with 2% waterglass (M1) was superior to that of the original M0 cement. The micro analysis indicated that waterglass can improve the compactness of the microstructure of MPC and prevent the dissolution of struvite-K.

Modeling a Multi-Parameter Interaction of Geophysical Controls for Production Optimization in Gas Shale Systems

Well bottomhole pressure optimization issue has been a significant concern for efficiently developing unconventional systems due to strong stress sensitivity. Therefore, it is of practical interest to clarify influence mechanisms involved in stress sensitivity for gas shale, which is further included in the production model to determine main controlling factors for bottomhole pressure strategy optimization for long term hydrocarbon extraction. Currently, many production models were limited in exploring stress sensitivity mechanisms but adopted common empirical equations regarding net pore stress instead. In addition, geophysical control analysis for unconventional systems optimization was mostly conducted using local sensitivity qualitative analysis, which should be validated to be reliable and applicable to fields using multi-parameter interaction influence. As a result, in this paper, an efficient workflow to rationally optimize gas well production system was provided by combining the production model, orthogonal design approach, and response surface method. To be specific, the compound flow model for shale gas reservoirs, incorporating multiple stress sensitivity mechanisms, was proposed to function as a theoretical basis for production optimization simulation. Last but not least, local sensitivity analysis was conducted to qualitatively analyze the impact of influencing factors on 20 year-production of gas wells under different bottomhole production methods. The simulation results showed that the managed pressure drawdown scheme can be adopted for reservoirs with high reservoir pressure and tight matrix properties, while the high-pressure drawdown scheme is suitable for reservoir with better fracturing effect and high external water content. Finally, based on the proposed gas flow model and orthogonal design experiments, response surface design and single factor analysis as well, an optimization mathematical model for shale gas multi-parameter interaction was established, which intuitively quantified the effects of multi-geophysical controls on EUR increase in different production durations, including matrix properties, fracture properties, and production system indicator parameters. These findings provide a more reliable reference for production system optimization based on a series of mathematical approaches to improve overall long-term recovery from shale gas reservoirs.

Fate of charge order in overdoped La-based cuprates

In high-temperature cuprate superconductors, stripe order refers broadly to a coupled spin and charge modulation with a commensuration of eight and four lattice units, respectively. How this stripe order evolves across optimal doping remains a controversial question. Here we present a systematic resonant inelastic x-ray scattering study of weak charge correlations in La2-xSrxCuO4 and La1.8-xEu0.2SrxCuO4. Ultra high energy resolution experiments demonstrate the importance of the separation of inelastic and elastic scattering processes. Long-range temperature-dependent stripe order is only found below optimal doping. At higher doping, short-range temperature-independent correlations are present up to the highest doping measured. This transformation is distinct from and preempts the pseudogap critical doping. We argue that the doping and temperature-independent short-range correlations originate from unresolved electron-phonon coupling that broadly peaks at the stripe ordering vector. In La2-xSrxCuO4, long-range static stripe order vanishes around optimal doping and we discuss both quantum critical and crossover scenarios.

Nanosecond gating of superconducting nanowire single-photon detectors using cryogenic bias circuitry

Superconducting nanowire single-photon detectors (SNSPDs) show near unity efficiency, low dark count rate, and short recovery time. Combining these characteristics with temporal control of SNSPDs broadens their applications as in active de-latching for higher dynamic range counting or temporal filtering for pump-probe spectroscopy or LiDAR. To that end, we demonstrate active gating of an SNSPD with a minimum off-to-on rise time of 2.4 ns and a total gate length of 5.0 ns. We show how the rise time depends on the inductance of the detector in combination with the control electronics. The gate window is demonstrated to be fully and freely, electrically tunable up to 500 ns at a repetition rate of 1.0 MHz, as well as ungated, free-running operation. Control electronics to generate the gating are mounted on the 2.3 K stage of a closed-cycle sorption cryostat, while the detector is operated on the cold stage at 0.8 K. We show that the efficiency and timing jitter of the detector is not altered during the on-time of the gating window. We exploit gated operation to demonstrate a method to increase in the photon counting dynamic range by a factor 11.2, as well as temporal filtering of a strong pump in an emulated pump-probe experiment.

In situ uniaxial pressure cell for x-ray and neutron scattering experiments

We present an in situ uniaxial pressure device optimized for small angle x-ray and neutron scattering experiments at low-temperatures and high magnetic fields. A stepper motor generates force, which is transmitted to the sample via a rod with an integrated transducer that continuously monitors the force. The device has been designed to generate forces up to 200 N in both compressive and tensile configurations, and a feedback control allows operating the system in a continuous-pressure mode as the temperature is changed. The uniaxial pressure device can be used for various instruments and multiple cryostats through simple and exchangeable adapters. It is compatible with multiple sample holders, which can be easily changed depending on the sample properties and the desired experiment and allow rapid sample changes.

Bottom-hole pressure drawdown management of fractured horizontal wells in shale gas reservoirs using a semi-analytical model

Due to strong stress sensitivity resulted from unconventional tight formationsit is of practical interest to formulate a reasonable pressure drawdown plan to improve gas extraction recovery. The impact of water-shale interactions on the reservoir permeability was previously ignored in the managed pressure drawdown optimization. The controlled-pressure production dynamic analysis was mostly conducted using numerical simulation, lack of rigorous theoretical support. Hence in this paper, a theoretical production prediction model was proposed and verified with HIS RTA 2015by incorporating multiple pressure drawdown mechanisms and various non-linear gas flow process. The on-site production effects dominated by two different pressure drop methods was further compared, indicating that compared to depressurization production, the production reversion can occur in the controlled pressure production process and the EUR of single well can be increased by about 30% under the control of managed pressure drawdown approach. Finally, the pressure drawdown optimization strategy was carried out on the field test from the both production effect and economic benefits, which demonstrated that the best economic solution can generally be obtained in the early stage of production. The research results can be closely linked to the on-site production practice of shale gas wells, providing insights into designing optimized production strategy scheme.

Constraints on Heavy Decaying Dark Matter from 570 Days of LHAASO Observations

The kilometer square array (KM2A) of the large high altitude air shower observatory (LHAASO) aims at surveying the northern γ-ray sky at energies above 10 TeV with unprecedented sensitivity. γ-ray observations have long been one of the most powerful tools for dark matter searches, as, e.g., high-energy γ rays could be produced by the decays of heavy dark matter particles. In this Letter, we present the first dark matter analysis with LHAASO-KM2A, using the first 340 days of data from 1/2-KM2A and 230 days of data from 3/4-KM2A. Several regions of interest are used to search for a signal and account for the residual cosmic-ray background after γ/hadron separation. We find no excess of dark matter signals, and thus place some of the strongest γ-ray constraints on the lifetime of heavy dark matter particles with mass between 10^{5} and 10^{9}  GeV. Our results with LHAASO are robust, and have important implications for dark matter interpretations of the diffuse astrophysical high-energy neutrino emission.

Intraarticular steroids as DMARD-sparing agents for juvenile idiopathic arthritis flares: Analysis of the Childhood Arthritis and Rheumatology Research Alliance Registry

BACKGROUND

Children with juvenile idiopathic arthritis (JIA) who achieve a drug free remission often experience a flare of their disease requiring either intraarticular steroids (IAS) or systemic treatment with disease modifying anti-rheumatic drugs (DMARDs). IAS offer an opportunity to recapture disease control and avoid exposure to side effects from systemic immunosuppression. We examined a cohort of patients treated with IAS after drug free remission and report the probability of restarting systemic treatment within 12 months.

METHODS

We analyzed a cohort of patients from the Childhood Arthritis and Rheumatology Research Alliance (CARRA) Registry who received IAS for a flare after a period of drug free remission. Historical factors and clinical characteristics and of the patients including data obtained at the time of treatment were analyzed.

RESULTS

We identified 46 patients who met the inclusion criteria. Of those with follow up data available 49% had restarted systemic treatment 6 months after IAS injection and 70% had restarted systemic treatment at 12 months. The proportion of patients with prior use of a biologic DMARD was the only factor that differed between patients who restarted systemic treatment those who did not, both at 6 months (79% vs 35%, p < 0.01) and 12 months (81% vs 33%, p < 0.05).

CONCLUSION

While IAS are an option for all patients who flare after drug free remission, it may not prevent the need to restart systemic treatment. Prior use of a biologic DMARD may predict lack of success for IAS. Those who previously received methotrexate only, on the other hand, are excellent candidates for IAS.

Upconversion Optogenetic Engineered Bacteria System for Time-Resolved Imaging Diagnosis and Light-Controlled Cancer Therapy

Engineering bacteria can achieve targeted and controllable cancer therapy using synthetic biology technology and the characteristics of tumor microenvironment. Besides, the accurate tumor diagnosis and visualization of the treatment process are also vital for bacterial therapy. In this paper, a light control engineered bacteria system based on upconversion nanoparticles (UCNP)-mediated time-resolved imaging (TRI) was constructed for colorectal cancer theranostic and therapy. UCNP with different luminous lifetimes were separately modified with the tumor targeting molecule (folic acid) or anaerobic bacteria (Nissle 1917, EcN) to realize the co-localization of tumor tissues, thus improving the diagnostic accuracy based on TRI. In addition, blue light was used to induce engineered bacteria (EcN-pDawn-φx174E/TRAIL) lysis and the release of tumor apoptosis-related inducing ligand (TRAIL), thus triggering tumor cell death. In vitro and in vivo results indicated that this system could achieve accurate tumor diagnosis and light-controlled cancer therapy. EcN-pDawn-φx174E/TRAIL with blue light irradiation could inhibit 53% of tumor growth in comparison to that without blue light irradiation (11.8%). We expect that this engineered bacteria system provides a new technology for intelligent bacterial therapy and the construction of cancer theranostics.

OS10.6.A What is the initial cell in the subventricular zone for human glioblastoma genesis?

Background

We all have a fundamental question about why glioblastoma (GBM) develops. In order to find the answer to this fundamental question, if you find out what the first cell is, you will get closer to the answer. GBM arises from the subventricular zone (SVZ). GBM is one of the most devastating tumour of human brain as the most optimal treatment barely prolongs the survival, and it does not cure the disease. As the majority of GBM tissues show copy number variations (CNV) of co-altered chromosomal 7 gain and 10 loss, we hypothesized the origin cell (Oc) of SVZ may be traced back with these markers. The cellular identity of the Oc is still unknown and it is different from the tumour-derived progenitor-like cells. We aimed to define these cells from the SVZ that have a potential to get activated into GBM.

Material and Methods

We compared bulk RNA sequencing (RNAseq) data of IDHwt GBM tumor tissue (n=122), tumor free SVZ from GBM patients (n=40), tumor-free control SVZ of non-glial tumor (n=9). Pared single nucleus RNAseq (snRNAseq) or single cell RNAseq (scRNAseq) samples of tumor free SVZ (n=11) and GBM tumor (n=8), were done to see cell specific CNVs. We developed genetically engineered mouse models for GBM genesis introducing three driver mutations (TP53, PTEN, and EGFRviii) into SVZ to isolate mouse Oc (mOc) and mouse cancer cells (mCc). The biological characteristics of separated mOc and mCc were compared. Bulk RNAseq and scRNAseq were performed on these cells (mOc, mCc), and their cellular state was compared with the human gene set.

Results

In this work, we found two types of the Oc in the RNA sequencing of 60 human tumour free-SVZ samples. Furthermore, single-cell level analysis revealed that two Oc types in SVZ harbor ongoing patterns of CNV co-alterations from Oc1 to Oc2, and finally to GBM. The Oc1 type cells contained the CNV signature of Oc2 ancestor with neural progenitor cell (NPC) signature. Oc2 type cells expressed a high level of EGFR than other cells with astrocyte-like cell signature. Both of these cells expressed oligodendrocyte progenitor cell (OPC)-like signatures in the SVZ. We validated the human-based findings by using the P53/PTEN/EGFR-mutant mouse model with EGFR/tdTomato overexpression and P53/PTEN knockout in the SVZ cells. As a result, non-tumourigenic and highly motile Oc-like cell-states are found in the mouse models, supporting the firework-like migration pattern from the SVZ.

Conclusion

Our results demonstrate how members of Oc preoccupy the SVZ, known as the stem cell niche and give rise to the tumour. We anticipate that a new therapy may emerge by targeting the Oc in the SVZ.

Vapor-Assisted In Situ Recrystallization for Efficient Tin-Based Perovskite Light-Emitting Diodes

Tin-based perovskites are a promising candidates to replace their toxic lead-based counterparts in optoelectronic applications, such as light-emitting diodes (LEDs). However, the development of tin perovskite LEDs is slow due to the challenge of obtaining high-quality tin perovskite films. Here, a vapor-assisted spin-coating method is developed to achieve high-quality tin perovskites and high-efficiency LEDs. It is revealed that solvent vapor can lead to in situ recrystallization of tin perovskites during the film-formation process, thus significantly improving the crystalline quality with reduced defects. An antioxidant additive is further introduced to suppress the oxidation of Sn²⁺ and increase the photoluminescence quantum efficiency up to ≈30%, which is an approximately fourfold enhancement in comparison with that of the control method. As a result, efficient tin perovskite LEDs are achieved with a peak external quantum efficiency of 5.3%, which is among the highest efficiency of lead-free perovskite LEDs.

Lawson Criterion for Ignition Exceeded in an Inertial Fusion Experiment

For more than half a century, researchers around the world have been engaged in attempts to achieve fusion ignition as a proof of principle of various fusion concepts. Following the Lawson criterion, an ignited plasma is one where the fusion heating power is high enough to overcome all the physical processes that cool the fusion plasma, creating a positive thermodynamic feedback loop with rapidly increasing temperature. In inertially confined fusion, ignition is a state where the fusion plasma can begin "burn propagation" into surrounding cold fuel, enabling the possibility of high energy gain. While "scientific breakeven" (i.e., unity target gain) has not yet been achieved (here target gain is 0.72, 1.37 MJ of fusion for 1.92 MJ of laser energy), this Letter reports the first controlled fusion experiment, using laser indirect drive, on the National Ignition Facility to produce capsule gain (here 5.8) and reach ignition by nine different formulations of the Lawson criterion.

Evidence for a Square-Square Vortex Lattice Transition in a High-T_{c} Cuprate Superconductor

Using sound velocity and attenuation measurements in high magnetic fields, we identify a new transition in the vortex lattice state of La_{2-x}Sr_{x}CuO_{4}. The transition, observed in magnetic fields exceeding 35 T and temperatures far below zero field T_{c}, is detected in the compression modulus of the vortex lattice, at a doping level of x=p=0.17. Our theoretical analysis based on Eilenberger's theory of the vortex lattice shows that the transition corresponds to the long-sought 45° rotation of the square vortex lattice, predicted to occur in d-wave superconductors near a van Hove singularity.

Hydrogel microcapsules containing engineered bacteria for sustained production and release of protein drugs

Subcutaneous administration of sustained-release formulations is a common strategy for protein drugs, which avoids first pass effect and has high bioavailability. However, conventional sustained-release strategies can only load a limited amount of drug, leading to insufficient durability. Herein, we developed microcapsules based on engineered bacteria for sustained release of protein drugs. Engineered bacteria were carried in microcapsules for subcutaneous administration, with a production-lysis circuit for sustained protein production and release. Administrated in diabetic rats, engineered bacteria microcapsules was observed to smoothly release Exendin-4 for 2 weeks and reduce blood glucose. In another example, by releasing subunit vaccines with bacterial microcomponents as vehicles, engineered bacterial microcapsules activated specific immunity in mice and achieved tumor prevention. The engineered bacteria microcapsules have potential to durably release protein drugs and show versatility on the size of drugs. It might be a promising design strategy for long-acting in situ drug factory.

Additive manufacturing of bioactive and biodegradable porous iron-akermanite composites for bone regeneration

Advanced additive manufacturing techniques have been recently used to tackle the two fundamental challenges of biodegradable Fe-based bone-substituting materials, namely low rate of biodegradation and insufficient bioactivity. While additively manufactured porous iron has been somewhat successful in addressing the first challenge, the limited bioactivity of these biomaterials hinder their progress towards clinical application. Herein, we used extrusion-based 3D printing for additive manufacturing of iron-matrix composites containing silicate-based bioceramic particles (akermanite), thereby addressing both of the abovementioned challenges. We developed inks that carried iron and 5, 10, 15, or 20 vol% of akermanite powder mixtures for the 3D printing process and optimized the debinding and sintering steps to produce geometrically-ordered iron-akermanite composites with an open porosity of 69-71%. The composite scaffolds preserved the designed geometry and the original α-Fe and akermanite phases. The in vitro biodegradation rates of the composites were improved as much as 2.6 times the biodegradation rate of geometrically identical pure iron. The yield strengths and elastic moduli of the scaffolds remained within the range of the mechanical properties of the cancellous bone, even after 28 days of biodegradation. The composite scaffolds (10-20 vol% akermanite) demonstrated improved MC3T3-E1 cell adhesion and higher levels of cell proliferation. The cellular secretion of collagen type-1 and the alkaline phosphatase activity on the composite scaffolds (10-20 vol% akermanite) were, respectively higher than and comparable to Ti6Al4V in osteogenic medium. Taken together, these results clearly show the potential of 3D printed porous iron-akermanite composites for further development as promising bone substitutes. STATEMENT OF SIGNIFICANCE: : Porous iron matrix composites containing akermanite particles were produced by means of multi-material additive manufacturing to address the two fundamental challenges associated with biodegradable iron-based biomaterials, namely very low rate of biodegradation and insufficient bioactivity. Our porous iron-akermanite composites exhibited enhanced biodegradability and superior bioactivity compared to porous monolithic iron scaffolds. The murine bone cells proliferated on the composite scaffolds, and secreted the collagen type-1 matrix that stimulated bony-like mineralization. The results show the exceptional potential of the developed porous iron-based composite scaffolds for application as bone substitutes.

POS0774 ANTI-Sm AUTOANTIBODIES IDENTIFY A PHENOTYPE OF SEVERE SLE WITH AN ASSOCIATED SERUM BIOMARKER PROFILE

Background

Antibodies to Smith (Sm) have been described as one of the most specific autoantibodies for systemic lupus erythematosus (SLE). Other than its association with lupus nephritis, there is, however, limited understanding of its clinical significance1,2.

Objectives

To describe clinical associations and serum protein profiles of anti-Sm positivity in SLE.

Methods

Patients fulfilling SLE classification criteria who were followed longitudinally in a prospective multicentre cohort were studied according to their baseline anti-Sm antibody status. Comparison between Sm+ and Sm- patients was made using descriptive statistics. Clinical associations of Sm positivity with patient disease characteristics were studied using logistic regression. In a subset, 211 serum analytes were measured using Quantibody, Luminex and ELISA assays. Associations between serum proteins and Sm positivity were studied using Least Absolute Shrinkage and Selection Operator (LASSO) penalised regression, adjusting for demographics (age, sex, ethnicity) and medication use

Results

383 patients were studied with median (IQR) follow-up of 4.9 (2,9) years; 65 (17%) had positive anti-Sm antibodies. Sm+ patients were significantly more likely to be of non-European ancestry (OR 2.73, 95% CI 1.55-4.82, p<0.001), and to be positive for anti-dsDNA antibodies (OR 2.8, 95% CI 2.3-3.4, p<0.001), anti-RNP antibodies (OR 15.7, 95% CI 13.9-17.8, p<0.001), direct anti-globulin test (OR 2.36, 95% CI 2.07-2.7, p<0.001) and hypocomplementemia (OR 7.73, 95% CI 5.1-11.7, p<0.001). Sm+ patients were significantly more likely to have active disease during the observation period in a range of organ domains, including mucocutaneous, renal, vasculitis and fever.

More Sm+ patients had episodes of High Disease Activity Status (HDAS, SLEDAI-2K ≧10)3 (OR 3.07, 95% CI 1.70-5.54, p<0.001) and persistent active disease (time-adjusted mean SLEDAI-2K > 4) (OR 3.23. 95% CI 1.84-5.70, p<0.001). Conversely, fewer Sm+ patients attained LLDAS for ≥50% observed time (19.7% vs 41.8%, p=0.002). Sm+ patients were more likely to be treated with glucocorticoids, immunosuppressants, and rituximab. There was no significant difference in damage accrual between Sm + and Sm - patients.

In serum protein analysis (n=197, 29 Sm+), LASSO modelling retained 3 proteins associated with Sm+ status, CXCL13, IL1RL1 and FLT1, along with Asian ethnicity and age. In analysis including pairwise interaction between predictors, 28 Sm+ associated proteins were identified, including CCL4, VCAM1, IL1RL1, Fcg R IIB/C, TDGF1, CEACAM1, TIMP1, BMP5, GDF15, and TNFRSF17.

Conclusion

Anti-Sm autoantibodies, present in 17% of SLE patients, were strongly associated with classical disease manifestations, more severe disease activity, and a specific serological and proteomic profile. These findings suggest anti-Sm+ SLE as a specific disease subset.

References

[1]Barada, FA., B.S. Andrews, J.S. Davis, R.P. Taylor, Antibodies to Sm in patients with systemic lupus erythematosus. Correlation of Sm antibody titers with disease activity and other laboratory parameters. Arthritis Rheum, 1981. 24:1236-1244

[2]Arroyo-Avilla, M, Y. Santiago-Casas, G.McGwin, R.S. Cantor, M. Petri, R. Ramsey-Goldman, J.D. Reveille, R.P.Kimberly, G.S. Alarcon, L.M.Vila, E.E. Brown. Clinical Associations of anti-Smith antibodies in PROFILE: a multi-ethnic lupus cohort. 2015. 34:1217-1223

[3]Koelmeyer, R., H.T. Nim, M. Nikpour, Y.B. Sun, A. Kao, O. Guenther, E. Morand, and A. Hoi, High disease activity status suggests more severe disease and damage accrual in systemic lupus erythematosus. Lupus Sci Med, 2020. 7(1).

Acknowledgements

I would like to acknowledge participants and clinicians involved with the Australian Lupus Registry & Biobank

Disclosure of Interests

None declared

Unveiling Unequivocal Charge Stripe Order in a Prototypical Cuprate Superconductor

In the cuprates, high-temperature superconductivity, spin-density-wave order, and charge-density-wave (CDW) order are intertwined, and symmetry determination is challenging due to domain formation. We investigated the CDW in the prototypical cuprate La_{1.88}Sr_{0.12}CuO_{4} via x-ray diffraction employing uniaxial pressure as a domain-selective stimulus to establish the unidirectional nature of the CDW unambiguously. A fivefold enhancement of the CDW amplitude is found when homogeneous superconductivity is partially suppressed by magnetic field. This field-induced state provides an ideal search environment for a putative pair-density-wave state.

Molecularly Controlled Quantum Well Width Distribution and Optoelectronic Properties in Quasi-2D Perovskite Light-Emitting Diodes

Owing to their excellent optoelectronic properties, quasi-2D perovskites with self-assembled multiple quantum well (MQW) structures have shown great potential in light-emitting diode (LED) applications. Understanding the correlation between the bulky cation, quantum well assembly, and optoelectronic properties of a quasi-2D perovskite is important. Here, we demonstrate that the dipole moment of the bulky cation can be one of the fundamental factors that controls the distribution and crystallinity of different quantum wells. We find that the bulky cation with a moderate dipole moment leads to moderately distributed well-width MQWs, resulting in a superior device efficiency due to the simultaneous achievement of favorable optical and electronic properties. The peak external quantum efficiency and the maximum luminance of the champion device are 10.8% and 19082 cd m^-2, respectively, positioning it among the best-performing quasi-2D green perovskite LEDs without further surface passivation or additive doping. This work provides a perspective on the rational design of bulky cations in quasi-2D perovskite LEDs, which is also essential for the development of other mixed-dimensional perovskite optoelectronic devices.