Fabrication and characterization of a titanium dioxide (TiO2) nanoparticles reinforced bio-nanocomposite containing Miswak (Salvadora persica L.) extract - the antimicrobial, thermo-physical and barrier properties

Objective: The microbial, physico-chemical and optical corruptions threaten a variety of foods and drugs and consequently the human biological safety and its accessible resources. The humanbeing's tendency towards bio-based materials and natural plant-extracts led to an increase in the usage of antimicrobial biocomposites based on medicinal herbs. Miswak (Salvadora persica L.) extract (SPE) has been proved effective for its antimicrobial and other biological activities. Therefore, in this study, titanium dioxide (TiO₂) nanoparticles (TONP) and SPE were applied to fabricate antimicrobial carboxymethyl cellulose (Na-CMC) based bio-nanocomposites which would simultaneously promote some thermo-physical and barrier properties. Methods: CMC-neat film (C1), CMC/TONP-2% (C2) and CMC/TONP-2% with 150, 300 and 450 mg/mL SPE (SPE150, SPE30 and SPE450, respectively) were fabricated. The physical and mechanical properties; elemental mapping analysis (MAP), X-ray diffraction (XRD), scanning electron microscopy (SEM), thermal gravimetric analysis (TGA-DTG); fourier transform infrared (FTIR), energy-dispersive X-ray (EDX) and UV-vis spectroscopies were done to further validate the results. Results: Addition of TONP (2%) improved the blocking of UV light at 280 nm while SPE-containing nanocomposites completely blocked it. FTIR, XRD and SEM confirmed the formation of homogeneous films and high miscibility of applied materials. TONP led to an increase in Young's modulus (YM) and stress at break (SB) while SPE decreased them and enhanced the elongation to break (EB) (flexibility) of the active nanocomposites. Compared to CMC-film, the thermo-gravimetric analysis (TGA-DTG) showed a higher thermal stability for CMC/TONP and CMC/TONP/SPE nanocomposites. The EDX spectroscopy and elemental mapping analysis (MAP) proved the existence and well-distributedness of Na, K, Cl, S, Ti, F and N elements in SPE-activated nanocomposites. The pure SPE and SPE-activated nanocomposites showed a favorable antimicrobial activity against both gram-positive (Staphylococcus aureus) and negative (Escherichia coli) bacteria. Conclusion: The CMC-TiO₂-SPE nanocomposites were homogeneously produced. Combination of TiO₂ nanoparticles and dose-dependent SPE led to an improvement of thermal stability, and high potential in antimicrobial and UV-barrier properties. These results can generally highlight the role of the fabricated antimicrobial bio-nanocomposites as a based for different applications especially in food/drug packaging or coating.

Needle-shaped amphoteric calix[4]arene as a magnetic nanocarrier for simultaneous delivery of anticancer drugs to the breast cancer cells

BACKGROUND

Chemotherapy as an important tool for cancer treatment faces many obstacles such as multidrug resistance and adverse toxic effects on healthy tissues. Drug delivery systems has opened a new window to overcome these problems. There has been a strong interest development of new platform and system for delivof chemotherapeutic agents.

PURPOSE

In the present study, a green synthesis method was chosen and performed for preparation of a novel amphoteric calix[4]arene (Calix) macrocycle with low toxicity to the human body.

MATERIALS AND METHODS

The amphoteric Calix was coated on the surface of Fe3O4 magnetic nanoparticles and used as a magnetic nanocarrier for simultaneous delivery of two anticancer agents, doxorubicin and methotrexate, against MCF7 cancer cells. Several chemical characterizations were done for validation of prepared nanocarrier, and in vitro loading and release studies of drugs were performed with good encapsulation efficiency.

RESULTS

In vitro biological studies including hemolysis assay, erythrocytes sedimentation rate, red blood cells aggregation, cyto cellular internalization, and apoptosis evaluations were performed. Based on results, the developed nanocarrier has many advantages and capability for an efficient codelivery of DOX and MTX, which has a highly potent ability to kill cancer cells.

CONCLUSION

All these results persuade us, this nanocarrier could be effectively used for cancer therapy of MCF7 breast cancer cells and is suitable for use in further animal studies in future investigations.

Computational Prediction of 1 H and 13 C NMR Chemical Shifts for Protonated Alkylpyrroles: Electron Correlation and Not Solvation is the Salvation

Prediction of chemical shifts in organic cations is known to be a challenge. In this article we meet this challenge for α-protonated alkylpyrroles, a class of compounds not yet studied in this context, and present a combined experimental and theoretical study of the ¹³ C and ¹ H chemical shifts in three selected pyrroles. We have investigated the importance of the solvation model, basis set, and quantum chemical method with the goal of developing a simple computational protocol, which allows prediction of ¹³ C and ¹ H chemical shifts with sufficient accuracy for identifying such compounds in mixtures. We find that density functional theory with the B3LYP functional is not sufficient for reproducing all ¹³ C chemical shifts, whereas already the simplest correlated wave function model, Møller-Plesset perturbation theory (MP2), leads to almost perfect agreement with the experimental data. Treatment of solvent effects generally improves the agreement with experiment to some extent and can in most cases be accomplished by a simple polarizable continuum model. The only exception is the NH proton, which requires inclusion of explicit solvent molecules in the calculation.

Structure of a new usnic acid derivative from a deacylating Mannich reaction: NMR studies supported by theoretical calculations of chemical shifts

In a conventional Mannich reaction using piperidine, hydroxypiperidines, morpholine, and N-methylpiperazine with usnic acid, a deacetylation was observed resulting in a substitution at C-2, a loss of an acetyl group, and a Mannich base with a stabilized enol. The enol has a hydrogen bond to the nitrogen of the secondary amine. The structure was investigated by nuclear magnetic resonance and deuterium isotope effects on ¹³ C chemical shifts as well as with density functional theory calculations to study the changed hydrogen bond pattern. It was found that the hydrogen bond involving the OH-9 group in chloroform forms a strong hydrogen bond than in usnic acid itself and that this hydrogen bond becomes even stronger in the more polar solvent, dimethylsulfoxide. Tautomerism was observed in the Mannich base as demonstrated by deuterium isotope effects on chemical shifts. The position of the tautomeric equilibrium depends on the solvent, and the position of the equilibrium governs the strength of the OH-9…O═C hydrogen bond.

NMR, MP2, and DFT study of thiophenoxyketenimines (o-thio-Schiff bases): Determination of the preferred form

Five new thiophenoxyketinimines have been synthesized. ¹ H and ¹³ C NMR spectra as well as deuterium isotope effects on ¹³ C chemical shifts are determined, and spectra are assigned. DFT and MP2 calculations of both structures, chemical shifts, and isotope effects on chemical shifts are done. The combined analysis reveals that the compounds are primarily on a zwitterionic form with an NH⁺ and a S^- group and with a little of the neutral form mixed in. Very strong intramolecular hydrogen bonding is found and very high NH chemical shifts are observed. The theoretical calculations show that calculations at the MP2 level are best to obtain correct "C═S" chemical shifts.

Dynamics of excited state proton transfer in nitro substituted 10-hydroxybenzo[h]quinolines

The ground state tautomerism and excited state intramolecular proton transfer (ESIPT) of 10-hydroxybenzo[h]quinoline (HBQ) and its nitro derivatives, 7-nitrobenzo[h]quinolin-10-ol (2) and 7,9-dinitrobenzo[h]quinolin-10-ol (3), have been studied in acetonitrile using steady state as well as time dependent spectroscopy and quantum-chemical calculations. In addition to the enol form absorbance in the range 360-390 nm, the absorption spectra of 2 and 3 exhibit a red shifted band at ∼450 nm. Chemometric data processing, based on individual band decomposition, allowed us to estimate the position of the ground state enol-keto tautomeric equilibrium (ΔG values of 1.03 and 0.62 kcal mol^-1 respectively for 2 and 3). The fluorescence stems from the keto form even if the enol form is optically excited as proven by the shape of the excitation spectra indicating that ESIPT takes place. The Stokes shift of the substituted compounds is substantially lower compared to HBQ, which follows from the fact that the substitution occurs in the formal cyclohexa-2,4-dienone moiety and leads to a decrease of the HOMO level of the keto tautomer. The pump-probe experiments show that in the nitro substituted HBQs 2 and 3 ESIPT occurs with a time constant of 0.89 ps and 0.68 ps, respectively. In both cases a mixture of the enol and proton transfer forms is optically excited. The enol form exhibits then the ESIPT and subsequently both fractions take the same relaxation path. We propose that in 2 and 3 the ESIPT path exhibits a potential energy barrier resulting in an incoherent rate governed process while in HBQ the ESIPT proceeds as a ballistic wavepacket motion along a path without significant barriers. The theoretical calculations (M06-2X/TZVP) confirm the existence of a barrier in the ground and excited states as result of the substitution.

Solvent control of intramolecular proton transfer: is 4-hydroxy-3-(piperidin-1-ylmethyl)-1-naphthaldehyde a proton crane?

The solvent dependent excited state dynamics of 4-hydroxy-3-(piperidin-1-ylmethyl)-1-naphthaldehyde (compound 2), a candidate for a molecular switch based on intramolecular proton transfer, was investigated by ultrafast spectroscopy and quantum-chemical calculations. In acetonitrile a mixture of molecules in the enol and zwitterionic proton transfer (PT) form exists in the ground state. However, the zwitterion is the energetically favored one in the electronically excited state. Optical excitation of the enol form results in intramolecular proton transfer and formation of the PT form within 1.4 ps. In addition we observe the appearance of a long living species with a rate of 1/(330 ps) which returns to the original ground state on time scales beyond 2 ns and which is attributed to the triplet state. In toluene the enol form is the only observed ground state tautomer, but no light induced proton transfer occurs. Again the long living triplet state is formed, even with a faster rate of 1/(11 ps). In methanol hydrogen bonds between 2 and solvent molecules stabilize strongly the PT form in the ground as well as in the excited state. Also in this case no light induced intramolecular proton transfer was observed but the formation of a long living species was. However, its absorption spectrum is distinctly different from the triplet state seen in acetonitrile and methanol.

Synthesis and properties of unsymmetrical azatrioxa[8]circulenes

Synthesis and properties are reported for a series of unsymmetrical antiaromatic azatrioxa[8]circulenes.

Deuterium isotope effects on ¹³C-NMR chemical shifts of 10-hydroxybenzo[h]quinolines

Deuterium isotope effects on ¹³C-NMR chemical shifts are investigated in a series of 10-hydroxybenzo[h]quinolines (HBQ's) The OH proton is deuteriated. The isotope effects on ¹³C chemical shifts in these hydrogen bonded systems are rather unusual. The formal four-bond effects are found to be negative, indicating transmission via the hydrogen bond. In addition unusual long-range effects are seen. Structures, NMR chemical shifts and changes in nuclear shieldings upon deuteriation are calculated using DFT methods. Two-bond deuterium isotope effects on 13C chemical shifts are correlated with calculated OH stretching frequencies. Isotope effects on chemical shifts are calculated for systems with OH exchanged by OD. Hydrogen bond potentials are discussed. New and more soluble nitro derivatives are synthesized.

A reactivity-selectivity study of the Friedel-Crafts acetylation of 3,3'-dimethylbiphenyl and the oxidation of the acetyl derivatives

BACKGROUND

Friedel-Crafts acetylation is an important route to aromatic ketones, in research laboratories and in industry. The acetyl derivatives of 3,3'-dimethylbiphenyl (3,3'-dmbp) have applications in the field of liquid crystals and polymers and may be oxidized to the dicarboxylic acids and derivatives that are of interest in cancer treatment.

FINDINGS

The effect of solvent and temperature on the selectivity of monoacetylation of 3,3'-dmbp by the Perrier addition procedure was studied using stoichiometric amounts of reagents. 4-Ac-3,3'-dmbp was formed almost quantitatively in boiling 1,2-dichloroethane and this is almost twice the yield hitherto reported. Using instead a molar ratio of substrate:AcCl:AlCl3 equal to 1:4:4 or 1:6:6 in boiling 1,2-dichloroethane, acetylation afforded 4,4'- and 4,6'-diacetyl-3,3'-dmbp in a total yield close to 100%. The acetyl derivatives were subsequently converted to the carboxylic acids by hypochlorite oxidation. The relative stabilities of the isomeric products and the corresponding σ-complexes were studied by DFT calculations and the data indicated that mono- and diacetylation followed different mechanisms.

CONCLUSIONS

Friedel-Crafts acetylation of 3,3'-dmbp using the Perrier addition procedure in boiling 1,2-dichloroethane was found to be superior to other recipes. The discrimination against the 6-acetyl derivative during monoacetylation seems to reflect a mechanism including an AcCl:AlCl3 complex or larger agglomerates as the electrophile, whereas the less selective diacetylations of the deactivated 4-Ac-3,3'-dmbp are suggested to include the acetyl cation as the electrophile. The DFT data also showed that complexation of intermediates and products with AlCl3 does not seem to be important in determining the mechanism.

Optically induced linking of protein and nanoparticles to gold surfaces

Attachment of molecules and proteins to surfaces is of great interest for the development of a large variety of applications. We present herein a novel approach to efficiently couple a molecule of choice to biological building blocks. We synthesized and employed a new derivative of 5-bromo-7-nitroindoline to attach nucleophilic molecules and proteins to gold surfaces by photochemical activation. The reaction can be seen as a photoactivated alternative to the activated ester type chemistries that are commonly used to attach proteins or molecules to surfaces. We characterize the reaction by UV-vis and NMR spectroscopy, and as test of principle experiment, we show that we can attach proteins to surfaces and demonstrate that we can functionalize gold nanoparticles by this optically induced cross-linking reaction.

NMR of a series of novel hydroxyflavothiones

Alkylated hydroxyflavothiones, namely flavothione, 5-hydroxyflavothione, 5,7-dihydroxyflavothione (chrysinthione), 7-dodecyloxy-5-hydroxyflavothione, 7-butyloxy-5-hydroxyflavothione, 2',3,4',7-tetramethoxy-5-hydroxyflavothione, 3,3',4',7-tetramethoxy-5-hydroxyflavothione, 7-butyloxy-4',5-dihydroxyflavothione and 7-butyloxy-4',5-hydroxyflavanonethione have been synthesized from the corresponding hydroxyflavones in two steps, alkylation of the non-hydrogen-bonded hydroxyl groups by bromoalkanes or dimethyl sulfate followed by conversion of the carbonyl group to a thione using Lawesson's Reagent under microwave irradiation and solvent-free conditions. Part of the alkylated flavanone, 7-butyloxy-4',5-dihydroxyflavanone, was oxidized during the treatment with Lawesson's reagent to yield a second product 7-butyloxy-4',5-dihydroxyflavothione in addition to the target product butyloxy-4',5-hydroxyflavanonethione. Deuterium isotope effects on 13C chemical shifts have been measured in hydroxyflavones, isoflavones, flavanones and the thio analogs. Formal four-bond deuterium isotope effects on 13C chemical shifts, nDeltaC=S(OD) are very sensitive to variations in structures and substitution patterns. Density functional theory (DFT) calculations are carried out to obtain geometries. Correlations relating distances around the hydrogen bond system to the deuterium isotope effects on 13C chemical shifts are discussed. 13C chemical shifts are calculated by DFT methods. Effects of thiocarbonyl anisotropies are suggested.

Conformational and tautomeric eccentricities of 2-acetyl-1,8-dihydroxynaphthalenes

Tautomerism in aromatic systems with oxygen substitutents is rare. This is investigated in 2-acetyl-1,8-dihydroxy-3,6-dimethylnaphthalene (1) and in 2,7-diacetyl-1,8-dihydroxy-3,6-dimethylnaphthalene (2). The tautomeric nature of 2-acetyl-1,8-dihydroxy-3,6-dimethylnaphthalene is supported by long-range hydrogen-hydrogen coupling between the OH-1 and the OH-8 and by the isotope effects on 13C caused by deuteration at the CH3C==O methyl group. Compound 2 participates in a degenerate equilibrium between two equivalent nonsymmetrical rotamers (2A and 2B), each having two intramolecular O...HO hydrogen bonds: one involving an acetyl oxygen and the neighboring hydroxyl group, and the other between the oxygen centers at positions 1 and 8. In addition, each rotamer is involved in a tautomeric equilibrium, with a structure having an OH-substituted exocyclic double bond (2AT or 2BT).DFT calculations for a large set of compounds highlight the factors controlling the unusual rotational and tautomeric behaviors. A very important factor seems to be the repulsive interaction between the O-1 and O-8 centers, which is modulated by formation of an OH-1...O-8 or OH-8...O1 hydrogen bond. Steric interactions, mesomeric release of electrons from the oxygen at position 8, and a strong OH...O...C hydrogen bond are other factors.Solid-state 13C NMR spectra of 2,7-diacetyl-1,8-dihydroxy-3,6-dimethylnaphthalene at different temperatures demonstrated no averaging in the solid, whereas partially deuterated 2-acetyl-1,8-dihydroxy-3,6-dimethylnaphthalene showed an isotope effect at C-1 of 1.5 ppm, indicating tautomerism in the solid state.