Development progresses of radio frequency ion source for neutral beam injector in fusion devices

A large-area RF (radio frequency)-driven ion source is being developed in Germany for the heating and current drive of an ITER device. Negative hydrogen ion sources are the major components of neutral beam injection systems in future large-scale fusion experiments such as ITER and DEMO. RF ion sources for the production of positive hydrogen (deuterium) ions have been successfully developed for the neutral beam heating systems at IPP (Max-Planck-Institute for Plasma Physics) in Germany. The first long-pulse ion source has been developed successfully with a magnetic bucket plasma generator including a filament heating structure for the first NBI system of the KSTAR tokamak. There is a development plan for an RF ion source at KAERI to extract the positive ions, which can be applied for the KSTAR NBI system and to extract the negative ions for future fusion devices such as the Fusion Neutron Source and Korea-DEMO. The characteristics of RF-driven plasmas and the uniformity of the plasma parameters in the test-RF ion source were investigated initially using an electrostatic probe.

Improvement of a plasma uniformity of the 2nd ion source of KSTAR neutral beam injector

The 2nd ion source of KSTAR (Korea Superconducting Tokamak Advanced Research) NBI (Neutral Beam Injector) had been developed and operated since last year. A calorimetric analysis revealed that the heat load of the back plate of the ion source is relatively higher than that of the 1st ion source of KSTAR NBI. The spatial plasma uniformity of the ion source is not good. Therefore, we intended to identify factors affecting the uniformity of a plasma density and improve it. We estimated the effects of a direction of filament current and a magnetic field configuration of the plasma generator on the plasma uniformity. We also verified that the operation conditions of an ion source could change a uniformity of the plasma density of an ion source.

Low-emittance electron bunches from a laser-plasma accelerator measured using single-shot x-ray spectroscopy

X-ray spectroscopy is used to obtain single-shot information on electron beam emittance in a low-energy-spread 0.5 GeV-class laser-plasma accelerator. Measurements of betatron radiation from 2 to 20 keV used a CCD and single-photon counting techniques. By matching x-ray spectra to betatron radiation models, the electron bunch radius inside the plasma is estimated to be ~0.1 μm. Combining this with simultaneous electron spectra, normalized transverse emittance is estimated to be as low as 0.1 mm mrad, consistent with three-dimensional particle-in-cell simulations. Correlations of the bunch radius with electron beam parameters are presented.

Histologically benign but clinically malignant neoplasms in the thorax: CT-pathological overview

The purpose of this article is to review the computed tomography (CT) and histopathological features of uncommon primary neoplasms of the thorax that can manifest clinically malignant features (multiplicity of pulmonary nodules, an invasive nature, and metastases or recurrence after surgery) with little evidence of histological malignancy.

First neutral beam injection experiments on KSTAR tokamak

The first neutral beam (NB) injection system of the Korea Superconducting Tokamak Advanced Research (KSTAR) tokamak was partially completed in 2010 with only 1∕3 of its full design capability, and NB heating experiments were carried out during the 2010 KSTAR operation campaign. The ion source is composed of a JAEA bucket plasma generator and a KAERI large multi-aperture accelerator assembly, which is designed to deliver a 1.5 MW, NB power of deuterium at 95 keV. Before the beam injection experiments, discharge, and beam extraction characteristics of the ion source were investigated. The ion source has good beam optics in a broad range of beam perveance. The optimum perveance is 1.1-1.3 μP, and the minimum beam divergence angle measured by the Doppler shift spectroscopy is 0.8°. The ion species ratio is D(+):D(2)(+):D(3)(+) = 75:20:5 at beam current density of 85 mA/cm(2). The arc efficiency is more than 1.0 A∕kW. In the 2010 KSTAR campaign, a deuterium NB power of 0.7-1.5 MW was successfully injected into the KSTAR plasma with a beam energy of 70-90 keV. L-H transitions were observed within a wide range of beam powers relative to a threshold value. The edge pedestal formation in the T(i) and T(e) profiles was verified through CES and electron cyclotron emission diagnostics. In every deuterium NB injection, a burst of D-D neutrons was recorded, and increases in the ion temperature and plasma stored energy were found.

Development of a plasma generator for a long pulse ion source for neutral beam injectors

A plasma generator for a long pulse H(+)/D(+) ion source has been developed. The plasma generator was designed to produce 65 A H(+)/D(+) beams at an energy of 120 keV from an ion extraction area of 12 cm in width and 45 cm in length. Configuration of the plasma generator is a multi-cusp bucket type with SmCo permanent magnets. Dimension of a plasma chamber is 25 cm in width, 59 cm in length, and 32.5 cm in depth. The plasma generator was designed and fabricated at Japan Atomic Energy Agency. Source plasma generation and beam extraction tests for hydrogen coupling with an accelerator of the KSTAR ion source have been performed at the KSTAR neutral beam test stand under the agreement of Japan-Korea collaborative experiment. Spatial uniformity of the source plasma at the extraction region was measured using Langmuir probes and ±7% of the deviation from an averaged ion saturation current density was obtained. A long pulse test of the plasma generation up to 200 s with an arc discharge power of 70 kW has been successfully demonstrated. The arc discharge power satisfies the requirement of the beam production for the KSTAR NBI. A 70 keV, 41 A, 5 s hydrogen ion beam has been extracted with a high arc efficiency of 0.9 -1.1 A/kW at a beam extraction experiment. A deuteron yield of 77% was measured even at a low beam current density of 73 mA/cm(2).

Efficacy and tolerability of mirtazapine in treating major depressive disorder with anxiety symptoms: an 8-week open-label randomised paroxetine-controlled trial

AIMS

Prominent anxiety symptoms are related to poor clinical course and outcome in major depressive disorder (MDD). The aim of this randomised, open-label, controlled study is to compare the efficacy and tolerability of mirtazapine in the form of orally disintegrating tablets against paroxetine in treating MDD patients with anxiety symptoms.

METHODS

A total of 60 MDD patients with a score above 18 on the Hamilton Anxiety Rating Scale (HARS) were randomly assigned to 8 weeks of fixed dosing treatment with mirtazapine (15-30 mg/day) and paroxetine (10-20 mg/day). Efficacy was primarily assessed with the HARS and with the 17-item Hamilton Depression Rating Scale (HDRS) at weeks 1, 2, 4 and 8 after treatment. Tolerability was assessed from adverse events.

RESULTS

The generalised estimating equations (GEE) models showed that the rates of improvement in HDRS scores from baseline to week 8 were similar between mirtazapine and paroxetine groups. However, patients with mirtazapine exhibited earlier improvement in HARS scores at weeks 1 and 2. Week-by-week GEE models showed that these significant differences in improvement of HARS scores between the two treatment groups were detectable from the first evaluation after the treatment (week 1) and maintained through week 2. There was no difference in the overall frequency of adverse events experienced between the two treatment groups. The most common adverse event in the mirtazapine group was somnolence (n = 8), whereas that in the paroxetine group was gastrointestinal discomfort (n = 9).

CONCLUSIONS

Mirtazapine and paroxetine were equally effective and well tolerated for the depressive symptoms in MDD patients with the high level of anxiety symptoms. Mirtazapine was, however, more effective in reducing the anxiety symptoms than paroxetine in the early weeks of treatment, suggesting that mirtazapine may have an earlier-onset action for the anxiety symptoms in MDD patients.

Herpes simplex virus pneumonia: high-resolution CT findings

The purpose of this study was to evaluate the high-resolution computed tomographic (HRCT) findings of five adult patients (either immunocompromised or immunocompetent) with herpes simplex virus (HSV) pneumonia. We retrospectively assessed HRCT images of 5 patients (all male patients, age range 39-70 years; mean 62 years) with HSV pneumonia. The specific pathological findings that allowed for a definite diagnosis of HSV pneumonia included the presence of intranuclear inclusion bodies on haematoxylin and eosin staining, or positive immunohistochemical staining. High-resolution CT scans (HiSpeed Advantage or LightSpeed QX/i, GE Healthcare) using 1- or 1.25-mm collimation at 10-mm intervals without intravenous contrast medium injection were assessed, in particular for the presence and distribution of parenchymal abnormalities including ground-glass attenuation, airspace consolidation, nodules and interlobular septal thickening. In two patients, pathological specimens were obtained from open lung biopsy or bronchoscopic biopsy, and were correlated with HRCT findings. Three HRCT patterns of pulmonary abnormalities were identified in our series of HSV pneumonia: predominant areas of diffuse or multifocal ground-glass attenuation, predominant areas of multifocal peribronchial consolidations, and a mixed pattern of both. Histopathologically, areas of ground-glass attenuation seen on HRCT corresponded to diffuse alveolar damage in one patient who underwent open lung biopsy. No specific differences in HRCT findings were seen between the immunocompromised and the immunocompetent patients. In patients suspected of having an acute lower respiratory infection, whether immunocompromised or immunocompetent, a possibility of HSV pneumonia can be included in differential diagnoses when diffuse or multifocal areas of ground-glass attenuation and/or consolidations are seen on HRCT.

Comparison of temporal lobectomies of children and adults with intractable temporal lobe epilepsy

INTRODUCTION

The aim of the study was to assess the difference in clinical characteristics and postsurgical outcomes between children and adults who have undergone temporal lobectomy (TL).

MATERIALS AND METHODS

We retrospectively reviewed the medical records of 52 patients who had undergone TL between 2006 and 2008. Nineteen patients were classified as children (<or=18 years old), and 33 patients were classified as adults (>18 years old) according to the age when TL had been performed.

RESULTS

Twelve of 19 (63.2%) children and 24 of 33 (72.7%) adults became seizure free. Rapid secondary generalization such as generalized tonic or tonic-clonic seizures showed a tendency to be more prominent in children (four of 19, 21.1%) than in adults (three of 33, 9.1%). Patients in childhood had significantly more multifocal discharges on interictal electroencephalography (EEG) (42.1%) compared to adults (15.2%, p = 0.014). The mean extent of surgical excision was 5.0 cm in children and 4.1 cm in adults (p = 0.001). The incidence of hippocampal sclerosis, the most common pathologic finding in the two groups, was 57.9% (11 of 19) in children and 78.8% (26 of 33) in adults. Malformations of cortical development were significantly more frequent in children (nine of 19, 47.4%) than in adults (seven of 33, 21.2%). Dual pathology was found in 31.6% of children and in 12.1% of adults. The intelligence quotient and memory quotient values in children with temporal lobe resection remained nearly steady during follow-up period without significant decline.

CONCLUSION

Patients undergoing TL during childhood compared to during adulthood had distinctively different interictal EEG, resectional extents, and pathologic findings.

Electrical properties and surface morphology of SiO(x)-Pt nano-composite thin films

Recently, ceramic metals (cermets) have been widely investigated for use as embedded resistor materials. In this study, SiO-Pt nano-composite cermets were developed to control the resitivity and temperature coefficients of resistance (TCR) of embedded thin film resistors. The SiO-Pt nano-composite was prepared by the co-sputtering of a SiO(x) target and Pt chips onto glass. The experiments were conducted Pt concentrations in order to find the optimum conditions to achieve a high resistivity and low TCR. The electrical properties of the sputtered SiO-Pt thin films were investigated by probe station and their crystal structures were observed by X-Ray Diffraction (XRD) and X-ray Photoelectron Spectroscopy (XPS). The surface morphology was observed by field emission scanning electron microscopy (FE-SEM) and high resolution transmission electron microscopy (HR-TEM). It was found that the Pt particles with a size of 3 approximately 5 nm were uniformly dispersed in the SiO matrix. A stable resistivity value of 26000 approximately 57000 microomega x cm and TCR value of -197 approximately -322 ppm/K were obtained at 3.5 approximately 3.7 at.% Pt.

Resective pediatric epilepsy surgery in Lennox-Gastaut syndrome

OBJECTIVE

The objective of this study was to evaluate the role of resective pediatric epilepsy surgery for Lennox-Gastaut syndrome (LGS).

METHODS

We analyzed clinical data of 27 children and adolescents who had LGS and underwent resective epilepsy surgery despite abundant (>30% of preoperative interictal and/or ictal epileptiform discharges) generalized or generalized contralateral maximal and multiregional electroencephalogram abnormalities.

RESULTS

On high-resolution MRI, cerebral lesions were noted in 23 (85.2%) patients but not in 4 (14.8%) patients. The age of patients at the time of surgery was between 1.7 and 17.3 years (mean: 7.8 years). Surgeries were lobar or multilobar resection in 21 (77.8%) patients and hemispherotomy in 6 (22.2%). At a mean of 33.1 months' postoperative follow-up, 16 (59.3%) patients had no seizures and 4 (14.8%) had infrequent seizures. Of 4 patients without brain abnormalities found on MRI, 2 patients became seizure-free after resective surgery was performed on the basis of electrophysiologic studies and concordant results in other multimodal neuroimages. Malformation of cortical development was the most common pathology and was seen in 20 (74.1%) patients, but 2 (7.4% patients) did not show any abnormal pathology. Sixteen (72.7%) patients, including 14 who had no seizures and 2 who had infrequent seizures after surgery, showed an increase in developmental quotient. No clinical profile was significantly associated with postoperative seizure-free rate.

CONCLUSIONS

Resective epilepsy surgery should be considered for children with LGS, despite abundant generalized and multiregional electroencephalogram abnormalities.

Accelerometer signal-based human activity recognition using augmented autoregressive model coefficients and artificial neural nets

Automatic recognition of human activities is one of the important and challenging research areas in proactive and ubiquitous computing. In this work, we present some preliminary results of recognizing human activities using augmented features extracted from the activity signals measured using a single triaxial accelerometer sensor and artificial neural nets. The features include autoregressive (AR) modeling coefficients of activity signals, signal magnitude areas (SMA), and title angles (TA). We have recognized four human activities using AR coefficients (ARC) only, ARC with SMA, and ARC with SMA and TA. With the last augmented features, we have achieved the recognition rate above 99% for all four activities including lying, standing, walking, and running. With our proposed technique, real time recognition of some human activities is possible.

3-D diffusion tensor MRI anisotropy content-adaptive finite element head model generation for bioelectromagnetic imaging

Realistic finite element (FE) head models have been successfully applied to bioelectromagnetic problems due to a realistic representation of arbitrary head geometry with inclusion of anisotropic material properties. In this paper, we propose a new automatic FE mesh generation scheme to generate a diffusion tensor MRI (DT-MRI) white matter anisotropy content-adaptive FE head model. We term this kind of mesh as wMesh. With this meshing technique, the anisotropic electrical conductivities derived from DT-MRIs can be best incorporated into the model. The influence of the white matter anisotropy on the EEG forward solutions has been studied via our wMesh head models. The scalp potentials computed from the anisotropic wMesh models against those of the isotropic models have been compared. The results describe that there are substantial changes in the scalp electrical potentials between the isotropic and anisotropic models, indicating that the inclusion of the white matter anisotropy is critical for accurate computation of E/MEG forward and inverse solutions. This fully automatic anisotropy-adaptive wMesh meshing scheme could be useful for modeling of individual-specific FE head models with better incorporation of the white matter anisotropic property towards bioelectromagnetic imaging.

Spatiotemporal human facial expression recognition using fisher independent component analysis and Hidden Markov Model

Facial expression recognition is an essential research area in the field of Human Computer Interface. In this work, we present a spatiotemporal approach of facial expression recognition using image sequences. The system proposed in this paper describes fisher independent component analysis as a feature extractor where the higher order moment classification method (i.e., independent component analysis) is augmented with fisher linear discriminant. This procedure is simply abbreviated as FICA and produces the shape based spatial facial expression features. For recognition, we have utilized Hidden Markov Model (HMM) to learn the obtained spatial features with the temporal dynamics in six different expressions. Our proposed approach for the first time deals with sequential images of emotion-specific facial expression data analyzed with FICA and recognized with HMM. Performance of our proposed system has been compared with four conventional approaches where principal component analysis, generic independent component analysis, enhanced independent component analysis, and augmented principal component analysis with linear discriminant analysis are utilized for feature extraction. Our preliminary results show that our proposed system yields much improved recognition rates reaching the mean recognition rate of 92.85%.

Interaction of D2 with Ti-adsorbed polyaniline and implication for hydrogen storage

Interaction of D2 with Ti-adsorbed polyaniline (PANI) and TiO2 at low Ti coverages has been investigated by temperature programmed desorption, Auger electron spectroscopy, and H2-D2 exchange in a high pressure cell. In contrast to recent DFT calculations (Lee et al. Phys. Rev. Lett. 2006, 97, 56104-56107) that have shown a multiple number of molecular hydrogen chemisorption on Ti-decorated PANI, only 0.52 D2 molecules per Ti atomically adsorb on Ti-deposited PANI at 87 K at a nominal Ti coverage of 2 ML. Broad TPD spectra of D2, HD, and H2 were observed, which showed a common peak at 250 K and another isotope-dependent peak at higher temperature. Ti deposited on TiO2 forms clusters with a size distribution at 87 K, on which D2 atomically adsorbs. As the Ti coverage increases, the D2 desorption peak gradually shifts from 200 to 260 K and the number of D2 molecules adsorbed per Ti also increases from 0.26 at 0.1 ML to 0.87 at 2 ML. We attribute this to the fact that D2 adsorbs on larger clusters with a greater adsorption energy. TPD spectra of D2 desorbing from Ti (2 ML)/PANI and Ti (1 ML)/TiO2 look very similar to each other. This led us to conclude that Ti also adsorbs on PANI in clusters. We suggest that no molecular D2 adsorption on Ti/PANI at 87 K is due to a reduced electron backdonation ability of Ti upon clustering. The small number of adsorbed D2 per Ti on both substrates was ascribed to irreversible D2 adsorption only on relatively large Ti clusters, while D2 adsorbs reversibly on small clusters. This was indirectly confirmed by the observation that continuous H2-D2 isotope exchange occurs to produce HD on Ti/PANI as well as on Ti/TiO2 at 106 K in a high pressure cell at 5.7 mTorr. Desorption mechanisms involving H atom abstraction from PANI by Ti clusters are proposed to account for the complex isotope-dependent TPD spectra. Implication of the present results for hydrogen storage based on Ti-dispersed polymers is briefly addressed.

Independent component feature-based human activity recognition via Linear Discriminant Analysis and Hidden Markov Model

In proactive computing, human activity recognition from image sequences is an active research area. This paper presents a novel approach of human activity recognition based on Linear Discriminant Analysis (LDA) of Independent Component (IC) features from shape information. With extracted features, Hidden Markov Model (HMM) is applied for training and recognition. The recognition performance using LDA of IC features has been compared to other approaches including Principle Component Analysis (PCA), LDA of PC, and ICA. The preliminary results show much improved performance in the recognition rate with our proposed method.

Differences in subgingival microflora of Korean and German periodontal patients

PURPOSE

The goal of this study was to characterize the microbiological profile in samples of subgingival plaque taken from periodontal patients with different ethnic origin.

METHODS

178 patients (n=90 from South Korea and n=88 from Germany; age: 45.4 +/- 10.4 years) were diagnosed with severe generalized periodontitis. In all patients the deepest pocket of each quadrant was sampled for subgingival plaque. The four samples per patient were pooled and subsequently analysed with a 16s-RNA-gene probe test.

RESULTS

Prevalence of Aggregatibacter actinomycetemcomitans was significantly higher in German patients (47.7%) compared to Korean patients (26.7%) (p < 0.01, chi(2)-test). For Tannerella forsythia and porphyromonas gingivalis, differences between Germans and Koreans were not as pronounced. A statistically significant difference could also be found for Treponema denticola (Germans: 95.5%, Koreans: 81.1%, p < 0.01, chi(2)-test). After logarithmic transformation, bacterial counts differed for all microorganisms under investigation between Germans and Koreans, even after using a General Linear Model/Analysis of Covariance (GLM/ANCOVA) to adjust for gender, age, smoking status, pocket probing depths (PPD) of sampled teeth, and gingival bleeding index (GBI).

CONCLUSION

Depending on their ethnic origin, the microbiological profile of pooled subgingival plaque sample seems to differ significantly between patients of Caucasian and Asian ethnic origin.