Tuning Light Emission Crossovers in Atomic-Scale Aluminum Plasmonic Tunnel Junctions

Atomic-sized plasmonic tunnel junctions are of fundamental interest, with great promise as the smallest on-chip light sources in various optoelectronic applications. Several mechanisms of light emission in electrically driven plasmonic tunnel junctions have been proposed, from single-electron or higher-order multielectron inelastic tunneling to recombination from a steady-state population of hot carriers. By progressively altering the tunneling conductance of an aluminum junction, we tune the dominant light emission mechanism through these possibilities for the first time, finding quantitative agreement with theory in each regime. Improved plasmonic resonances in the energy range of interest increase photon yields by 2 orders of magnitude. These results demonstrate that the dominant emission mechanism is set by a combination of tunneling rate, hot carrier relaxation time scales, and junction plasmonic properties.

Tunable Nanoplasmonic Photodetectors

Visible and infrared photons can be detected with a broadband response via the internal photoeffect. By use of plasmonic nanostructures, i.e., nanoantennas, wavelength selectivity can be introduced to such detectors through geometry-dependent resonances. Also, additional functionality, like electronic responsivity switching and polarization detection, has been realized. However, previous devices consisted of large arrays of nanostructures to achieve detectable photocurrents. Here we show that this concept can be scaled down to a single antenna level, resulting in detector dimensions well below the resonance wavelength of the device. Our design consists of a single electrically connected plasmonic nanoantenna covered with a wide-bandgap semiconductor allowing broadband photodetection in the visible/near-infrared via injection of hot carriers. We demonstrate electrical switching of the color sensitivity as well as polarization detection. Our results hold promise for the realization of ultrasmall photodetectors with advanced functionality.

Plasmonic sensors based on graphene and graphene hybrid materials

The past decade has witnessed a rapid growth of graphene plasmonics and their applications in different fields. Compared with conventional plasmonic materials, graphene enables highly confined plasmons with much longer lifetimes. Moreover, graphene plasmons work in an extended wavelength range, i.e., mid-infrared and terahertz regime, overlapping with the fingerprints of most organic and biomolecules, and have broadened their applications towards plasmonic biological and chemical sensors. In this review, we discuss intrinsic plasmonic properties of graphene and strategies both for tuning graphene plasmons as well as achieving higher performance by integrating graphene with plasmonic nanostructures. Next, we survey applications of graphene and graphene-hybrid materials in biosensors, chemical sensors, optical sensors, and sensors in other fields. Lastly, we conclude this review by providing a brief outlook and challenges of the field. Through this review, we aim to provide an overall picture of graphene plasmonic sensing and to suggest future trends of development of graphene plasmonics.

Smartphone-based Surface Plasmon Resonance Sensors: a Review

The surface plasmon resonance (SPR) is a phenomenon based on the combination of quantum mechanics and electromagnetism, which leads to the creation of charge oscillations on a metal-dielectric interface. The SPR phenomenon creates a signal which measures refractive index change at the metal-dielectric interface. SPR-based sensors are being developed for real-time and label-free detection of water pollutants, toxins, disease biomarkers, etc., which are highly sensitive and selective. Smartphones provide hardware and software capability which can be incorporated into SPR sensors, enabling the possibility of economical and accurate on-site portable sensing. The camera, screen, and LED flashlight of the smartphone can be employed as components of the sensor. The current article explores the recent advances in smartphone-based SPR sensors by studying their principle, components, application, and signal processing. Furthermore, the general theoretical and practical aspects of SPR sensors are discussed.

Ultrafast Plasmonics Beyond the Perturbative Regime: Breaking the Electronic-Optical Dynamics Correspondence

The transient optical response of plasmonic nanostructures has recently been the focus of extensive research. Accurate prediction of the ultrafast dynamics following excitation of hot electrons by ultrashort laser pulses is of major relevance in a variety of contexts from the study of light harvesting and photocatalytic processes to nonlinear nanophotonics and the all-optical modulation of light. So far, all studies have assumed the correspondence between the temporal evolution of the dynamic optical signal, retrieved by transient absorption spectroscopy, and that of the photoexcited hot electrons, described in terms of their temperature. Here, we show both theoretically and experimentally that this correspondence does not hold under a nonperturbative excitation regime. Our results indicate that the main mechanism responsible for the breaking of the correspondence between electronic and optical dynamics is universal in plasmonics, being dominated by the nonlinear smearing of the Fermi-Dirac occupation probability at high hot-electron temperatures.

Homogenous high enhancement surface-enhanced Raman scattering (SERS) substrates by simple hierarchical tuning of gold nanofoams

Surface enhanced Raman scattering (SERS) is a powerful tool for vibrational spectroscopy, providing orders of magnitude increase in chemical sensitivity compared to spontaneous Raman scattering. Yet it remains a challenge to synthesize robust, uniform SERS substrates quickly and easily. Lithographic approaches to produce substrates can achieve high, uniform sensitivity but are expensive and complex, thus difficult to scale. Facile solution-phase chemical approaches often result in unreliable SERS substrates due to heterogeneous arrangement of "hot spots" throughout the material. Here we demonstrate the synthesis and characterization of a homogeneous gold nanofoam (AuNF) substrate produced by a rapid, one-pot, four-ingredient synthetic approach. AuNFs are rapidly nucleated with macroscale porosity and then chemically roughened to produce nanoscale features that confer homogeneous and high signal enhancement (~10⁹) across large areas, a comparable performance to lithographically produced substrates.

Atomically Smooth Single-Crystalline Platform for Low-Loss Plasmonic Nanocavities

Nanoparticle-on-mirror plasmonic nanocavities, capable of extreme optical confinement and enhancement, have triggered state-of-the-art progress in nanophotonics and development of applications in enhanced spectroscopies. However, the optical quality factor and thus performance of these nanoconstructs are undermined by the granular polycrystalline metal films (especially when they are optically thin) used as a mirror. Here, we report an atomically smooth single-crystalline platform for low-loss nanocavities using chemically synthesized gold microflakes as a mirror. Nanocavities constructed using gold nanorods on such microflakes exhibit a rich structure of plasmonic modes, which are highly sensitive to the thickness of optically thin (down to ∼15 nm) microflakes. The microflakes endow nanocavities with significantly improved quality factor (∼2 times) and scattering intensity (∼3 times) compared with their counterparts based on deposited films. The developed low-loss nanocavities further allow for the integration with a mature platform of fiber optics, opening opportunities for realizing nanocavity-based miniaturized photonic devices for practical applications.

Construction of plasmonic Bi/Bismuth oxycarbonate/Zinc bismuth oxide ternary heterojunction for enhanced charge carrier separation and photocatalytic performances

In this work, a novel plasmonic ternary Bi/Bismuth oxycarbonate/Zinc bismuth oxide (Bi-Bi₂O₂CO₃-ZnBi₂O₄) is synthesized synergistically by a one-step hydrothermal method. The results show that the metallic Bi spheres and ZnBi₂O₄ nanoparticles are uniformly distributed on the surface of flower-like Bi₂O₂CO₃ layer. Compared with the bare ZnBi₂O₄ and Bi-Bi₂O₂CO₃, the ternary Bi-Bi₂O₂CO₃-ZnBi₂O₄ heterojunction displays a significantly improved solar energy harvesting efficiency and enhanced photocatalytic degradation activity for environmental organic pollutants. The degradation efficiency of organics reaches to 98.4% under simulated solar light illumination. The degradation kinetics indicates that the photocatalytic reaction rate constant of ternary system is about 4.4 and 29.5 times higher than that of pure ZnBi₂O₄ and Bi-Bi₂O₂CO₃, respectively. Moreover, O₂^- and h⁺ are the main active species in the photodegradation reaction. The improvement of the photocatalytic activity of the composites is attributed to the synergistic effect of ternary heterostructure and surface plasmon resonance (SPR), which promotes charge transfer and effectively inhibits the recombination of photogenerated carriers.

Remote Dual-Cavity Enhanced Second Harmonic Generation in a Hybrid Plasmonic Waveguide

On-chip nanoscale optical platforms capable of efficient second harmonic generation (SHG) are highly desired for optical sensing, subwavelength coherent sources, and quantum photonic devices. Here, we develop a remotely excited dual cavity resonance scheme to achieve significantly enhanced SHG in a CdSe nanobelt on Au film hybrid waveguide system. The SHG emission with superior efficiency originates from counter-propagating plasmonic modes interference in a horizontal Fabry-Pérot (FP) cavity enabled by remote excitation of propagating surface plasmons, which is further enhanced through a vertical FP cavity. With this effective cooperation of hybrid plasmon modes and FP cavity modes, 2 orders of magnitude enhancement of the conversion efficiency (3.5 × 10^-4 W^-1) is achieved compared to the off-resonance case. Our design provides new insight into the development of a multifunctional hybrid plasmonic device toward on-chip nonlinear nanophotonic applications.

Two orders of magnitude extra SERS enhancement on silver nanoparticle-based substrate induced by laser irradiation in nitrogen ambient

Photo-reduction of silver oxide and light-induced Ag nanoparticle (NP) generations have been applied for Surface-enhanced Raman spectroscopy (SERS) substrate fabricated for years. In this paper, we demonstrate a general method to enhance the SERS activity of conventional Ag NPs-based SERS substrates by performing Raman scattering measurement in a nitrogen ambient after a period of laser irradiation (photoactivation). The Raman characteristic peak intensity of carbonaceous impurities adsorbed on the surfaces of Ag NPs display an additional enhancement of 93 times after photoactivation in nitrogen ambient. A 3-fold extra Raman gain enhancement is also observed in the nitrogen-protected SERS measurement of R6G molecules. The extra SERS enhancement is attributed to the sub-nanometer scale near-field coupling between the Ag NPs and the photo-generated Ag clusters in the surface oxide layer of Ag NPs. This model is verified through the finite-difference time-domain (FDTD) simulations.

Integrated enhanced Raman scattering: a review

The demand for effective, real-time environmental monitoring and for customized point-of-care (PoC) health, requires the ability to detect low molecular concentrations, using portable, reliable and cost-effective devices. However, traditional techniques often require time consuming, highly technical and laborious sample preparations, as well as expensive, slow and bulky instrumentation that needs to be supervised by laboratory technicians. Consequently, fast, compact, self-sufficient, reusable and cost-effective lab-on-a-chip (LOC) devices, which can perform all the required tasks and can then upload the data to portable devices, would revolutionize any mobile sensing application by bringing the testing device to the field or to the patient. Integrated enhanced Raman scattering devices are the most promising platform to accomplish this vision and to become the basic architecture for future universal molecular sensors and hence an artificial optical nose. Here we are reviewing the latest theoretical and experimental work along this direction.

Handheld plasmonic biosensor for virus detection in field-settings

After World Health Organization (WHO) announced COVID-19 outbreak a pandemic, we all again realized the importance of developing rapid diagnostic kits. In this article, we introduced a lightweight and field-portable biosensor employing a plasmonic chip based on nanohole arrays integrated to a lensfree-imaging framework for label-free detection of viruses in field-settings. The platform utilizes a CMOS (complementary metal-oxide-semiconductor) camera with high quantum efficiency in the spectral window of interest to monitor diffraction field patterns of nanohole arrays under the uniform illumination of an LED (light-emitting diode) source which is spectrally tuned to the plasmonic mode supported by the nanohole arrays. As an example for the applicability of our biosensor for virus detection, we could successfully demonstrate the label-free detection of H1N1 viruses, e.g., swine flu, with medically relevant concentrations. We also developed a low-cost and easy-to-use sample preparation kit to prepare the surface of the plasmonic chip for analyte binding, e.g., virus-antibody binding. In order to reveal a complete biosensor technology, we also developed a user friendly Python™ - based graphical user interface (GUI) that allows direct access to biosensor hardware, taking and processing diffraction field images, and provides virus information to the end-user. Employing highly sensitive nanohole arrays and lensfree-imaging framework, our platform could yield an LOD as low as 10³ TCID₅₀/mL. Providing accurate and rapid sensing information in a handheld platform, weighing only 70 g and 12 cm tall, without the need for bulky and expensive instrumentation, our biosensor could be a very strong candidate for diagnostic applications in resource-poor settings. As our detection scheme is based on the use of antibodies, it could quickly adapt to the detection of different viral diseases, e.g., COVID-19 or influenza, by simply coating the plasmonic chip surface with an antibody possessing affinity to the virus type of interest. Possessing this ability, our biosensor could be swiftly deployed to the field in need for rapid diagnosis, which may be an important asset to prevent the spread of diseases before turning into a pandemic by isolating patients from the population.

Monolithic integration of nanorod arrays on microfluidic chips for fast and sensitive one-step immunoassays

Here, we present integrated nanorod arrays on microfluidic chips for fast and sensitive flow-through immunoassays of physiologically relevant macromolecules. Dense arrays of Au nanorods are easily fabricated through one-step oblique angle deposition, which eliminates the requirement of advanced lithography methods. We report the utility of this plasmonic structure to improve the detection limit of the cardiac troponin I (cTnI) assay by over 6 × 105-fold, reaching down to 33.9 fg mL-1 (~1.4 fM), compared with an identical assay on glass substrates. Through monolithic integration with microfluidic elements, the device enables a flow-through assay for quantitative detection of cTnI in the serum with a detection sensitivity of 6.9 pg mL-1 (~0.3 pM) in <6 min, which was 4000 times lower than conventional glass devices. This ultrasensitive detection arises from the large surface area for antibody conjugation and metal-enhanced fluorescent signals through plasmonic nanostructures. Moreover, due to the parallel arrangement of flow paths, simultaneous detection of multiple cancer biomarkers, including prostate-specific antigen and carcinoembryonic antigen, has been fulfilled with increased signal-to-background ratios. Given the high performance of this assay, together with its simple fabrication process that is compatible with standard mass manufacturing techniques, we expect that the prepared integrated nanorod device can bring on-site point-of-care diagnosis closer to reality.

Vectorial holography-mediated growth of plasmonic metasurfaces

Nowadays, the electromagnetic properties of artificial photonic materials can be well-tuned via designs over their composition and geometries. However, engineering the properties of artificial materials at the nanoscale is challenging and costly. Here we demonstrate a facile and low-cost method for fabricating large-area silver nanoparticle metasurfaces (AgNPMSs) by using the vectorial holography-mediated growth technique. The AgNPMS, which can be regarded as a hologram device, possesses excellent chiroptical properties. The vectorial holographic technique may open avenues for fabricating novel chiroptical metamaterials with large degrees of freedom, which can be further used for beam steering, photocatalysis, biosensing, etc.

Synthesis of TiO2/RGO with plasmonic Ag nanoparticles for highly efficient photoelectrocatalytic reduction of CO2 to methanol toward the removal of an organic pollutant from the atmosphere

The synergistic photoelectrochemical (PEC) technology is a robust process for the conversion of CO₂ into fuels. However, designing a highly efficient UV-visible driven photoelectrocatalyst is still challenging. Herein, a plasmonic Ag NPs modified TiO₂/RGO photoelectrocatalyst (Ag-TiO₂/RGO) has been designed for the PEC CO₂ reduction into selective production of CH₃OH. HR-TEM analysis revealed that Ag and TiO₂ NPs with average sizes of 4 and 7 nm, respectively, were densely grown on the few-micron-sized 2D RGO nanosheets. The physicochemical analysis was used to determine the optical and textural properties of the Ag-TiO₂/RGO nanohybrids. Under VU-Vis light illumination, Ag-TiO₂/RGO photocathode possessed a current density of 23.5 mA cm^-2 and a lower electrode resistance value of 125 Ω in CO₂-saturated 1.0 M KOH-aqueous electrolyte solution. Catalytic studies showed that the Ag-TiO₂/RGO photocathode possessed a remarkable PEC CO₂ reduction activity and selective production of CH₃OH with a yield of 85 μmol L^-1 cm^-2, the quantum efficiency of 20% and Faradic efficiency of 60.5% at onset potential of -0.7 V. A plausible PEC CO₂ reduction mechanism over Ag-TiO₂/RGO photocathode is schematically demonstrated. The present work gives a new avenue to develop high-performance and stable photoelectrocatalyst for PEC CO₂ reduction towards sustainable liquid fuels production.

Characterization of extracellular vesicles derived from mesenchymal stromal cells by surface-enhanced Raman spectroscopy

Extracellular vesicles (EVs) are secreted by all cells into bodily fluids and play an important role in intercellular communication through the transfer of proteins and RNA. There is evidence that EVs specifically released from mesenchymal stromal cells (MSCs) are potent cell-free regenerative agents. However, for MSC EVs to be used in therapeutic practices, there must be a standardized and reproducible method for their characterization. The detection and characterization of EVs are a challenge due to their nanoscale size as well as their molecular heterogeneity. To address this challenge, we have fabricated gold nanohole arrays of varying sizes and shapes by electron beam lithography. These platforms have the dual purpose of trapping single EVs and enhancing their vibrational signature in surface-enhanced Raman spectroscopy (SERS). In this paper, we report SERS spectra for MSC EVs derived from pancreatic tissue (Panc-MSC) and bone marrow (BM-MSC). Using principal component analysis (PCA), we determined that the main compositional differences between these two groups are found at 1236, 761, and 1528 cm^-1, corresponding to amide III, tryptophan, and an in-plane -C=C- vibration, respectively. We additionally explored several machine learning approaches to distinguish between BM- and Panc-MSC EVs and achieved 89 % accuracy, 89 % sensitivity, and 88 % specificity using logistic regression.

Plasmonic sensing, imaging, and stimulation techniques for neuron studies

Studies to understand the structure, functions, and electrophysiological properties of neurons have been conducted at the frontmost end of neuroscience. Such studies have led to the active development of high-performance research tools for exploring the neurobiology at the cellular and molecular level. Following this trend, research and application of plasmonics, which is a technology employed in high-sensitivity optical biosensors and high-resolution imaging, is essential for studying neurons, as plasmonic nanoprobes can be used to stimulate specific areas of cells. In this study, three plasmonic modalities were explored as tools to study neurons and their responses: (1) plasmonic sensing of neuronal activities and neuron-related chemicals; (2) performance-improved optical imaging of neurons using plasmonic enhancements; and (3) plasmonic neuromodulations. Through a detailed investigation of these plasmonic modalities and research subjects that can be combined with them, it was confirmed that plasmonic sensing, imaging, and stimulation techniques have the potential to be effectively employed for the study of neurons and understanding their specific molecular activities.

Fano Resonance-Based Blood Plasma Monitoring and Sensing using Plasmonic Nanomatryoshka

The fast label-free detection of specific antibodies and their concentration in blood plasma is useful for many applications, e.g., in Covid-19 patients. The change in biophysical properties like the refractive index of blood plasma due to the production of antibodies during infection may be very helpful in estimating the level and intensity of infection and subsequent treatment based on blood plasma therapy. In this article, Fano resonance-based refractive index sensor using plasmonic nanomatryoshka is proposed for blood plasma sensing. The interaction between hybridized modes (bright and dark modes) in optimized nanomatryoshka leads to Fano resonance, which by virtue of steeper dispersion can confine the light more efficiently compared with Lorentzian resonance. We propose the excitation of Fano resonances in sub 100-nm size nanomatryoshka based on newly emerging plasmonic materials ZrN and HfN, and one of the most widely used conventional plasmonic material, Au. Fano resonance-based plasmonic sensors leads to sensitivity = 188.5 nm/RIU, 242.5 nm/RIU, and 244.9 nm/RIU for Au, ZrN, and HfN, respectively. The corresponding figure of merit (nm/RIU) is ~ 3.5  ×  10³, 3.1  ×  10³, and 2.8  ×  10³ for Au, ZrN, and HfN, respectively. Present theoretical analysis shows that refractive index sensors with high sensitivity and figure of merit are feasible using Fano modes of plasmonic nanomatryoshka.

Broadband Metallic Fiber-to-Chip Couplers and a Low-Complexity Integrated Plasmonic Platform

We present a plasmonic platform featuring efficient, broadband metallic fiber-to-chip couplers that directly interface plasmonic slot waveguides, such as compact and high-speed electro-optic modulators. The metallic gratings exhibit an experimental fiber-to-slot coupling efficiency of -2.7 dB with -1.4 dB in simulations with the same coupling principle. Further, they offer a huge spectral window with a 3 dB passband of 350 nm. The technology relies on a vertically arranged layer stack, metal-insulator-metal waveguides, and fiber-to-slot couplers and is formed in only one lithography step with a minimum feature size of 250 nm. As an application example, we fabricate new modulator devices with an electro-optic organic material in the slot waveguide and reach 50 and 100 Gbit/s data modulation in the O- and C-bands within the same device. The devices' broad spectral bandwidth and their relaxed fabrication may render them suitable for experiments and applications in the scope of sensing, nonlinear optics, or telecommunications.

Functional Meta Lenses for Compound Plasmonic Vortex Field Generation and Control

Surface plasmon polaritons carrying orbital angular momentum are of great fundamental and applied interest. However, common approaches for their generation are restricted to having a weak dependence on the properties of the plasmon-generating illumination, providing a limited degree of control over the amount of delivered orbital angular momentum. Here we experimentally show that by tailoring local and global geometries of vortex generators, a change in helicity of light imposes arbitrary large switching in the delivered plasmonic angular momentum. Using time-resolved photoemission electron microscopy we demonstrate pristine control over the generation and rotation direction of high-order plasmonic vortices. We generalize our approach to create complex topological fields and exemplify it by studying and controlling a "bright vortex", exhibiting the breakdown of a high-order vortex into a mosaic of unity-order vortices while maintaining the overall angular momentum density. Our results provide tools for plasmonic manipulation and could be utilized in lab-on-a-chip devices.

Electrically Tunable All-PCM Visible Plasmonics

The realization of electrically tunable plasmonic resonances in the ultraviolet (UV) to visible spectral band is particularly important for active nanophotonic device applications. However, the plasmonic resonances in the UV to visible wavelength range cannot be tuned due to the lack of tunable plasmonic materials. Here, we experimentally demonstrate tunable plasmonic resonances at visible wavelengths using a chalcogenide semiconductor alloy such as antimony telluride (Sb₂Te₃), by switching the structural phase of Sb₂Te₃ from amorphous to crystalline. We demonstrate the excitation of a propagating surface plasmon with a high plasmonic figure of merit in both amorphous and crystalline phases of Sb₂Te₃ thin films. We show polarization-dependent and -independent plasmonic resonances by fabricating one and two-dimensional periodic nanostructures in Sb₂Te₃ thin films, respectively. Moreover, we demonstrate electrically tunable plasmonic resonances using a microheater integrated with the Sb₂Te₃/Si device. The developed electrically tunable Sb₂Te₃-based plasmonic devices could find applications in the development of active color filters.

Near-Perfect Absorption of Light by Coherent Plasmon-Exciton States

We experimentally demonstrate and theoretically study the formation of coherent plasmon-exciton states which exhibit absorption of >90% of the incident light (at resonance) and cancellation of absorption. These coherent states result from the interaction between a material supporting an electronic excitation and a plasmonic structure capable of (near) perfect absorption of light. We illustrate the potential implications of these coherent states by measuring the charge separation attainable after photoexcitation. Our study opens the prospect for realizing devices that exploit coherent effects in applications.

One-Shot Phase Image Distinction of Plasmonic and Dielectric Nanoparticles

Nanoscale phase control is one of the most powerful approaches to specifically tailor electrical fields in modern nanophotonics. Especially the precise subwavelength assembly of many individual nanobuilding blocks has given rise to exciting new materials as diverse as metamaterials, for miniaturizing optics, or 3D assembled plasmonic structures for biosensing applications. Despite its fundamental importance, the phase response of individual nanostructures is experimentally extremely challenging to visualize. Here, we address this shortcoming and measure the quantitative scattering phase of different nanomaterials such as gold nanorods and spheres as well as dielectric nanoparticles. Beyond reporting spectrally resolved responses, with phase changes close to π when passing the particles' plasmon resonance, we devise a simple method for distinguishing different plasmonic and dielectric particles purely based on their phase behavior. Finally, we integrate this novel approach in a single-shot two-color scheme, capable of directly identifying different types of nanoparticles on one sample, from a single widefield image.

Plasmon-enhanced fluorescence correlation spectroscopy for super-localized detection of nanoscale subcellular dynamics

In this report, we investigate plasmon-enhanced imaging fluorescence correlation spectroscopy (p-FCS). p-FCS takes advantage of extreme light confinement by localization at nanogap-based plasmonic nanodimer arrays (PNAs) for enhanced signal-to-noise ratio (SNR) and improved precision by registration with surface plasmon microscopy images. Theoretical results corroborate the enhancement by PNAs in the far-field. Near-field scanning optical microscopy was used to confirm near-field localization experimentally. Experimental confirmation was also conducted with fluorescent nanobeads. The concept was further applied to studying the diffusion dynamics of lysosomes in HEK293T cells stimulated by phorbol 12-myristate 13-acetate treatment. It was found that lysosomes demonstrate stronger super-diffusive behavior with relatively weaker sub-diffusion after stimulation. SNR measured of p-FCS was improved by 9.77 times over conventional FCS. This report is expected to serve as the foundation for an enhanced analytical tool to explore subcellular dynamics.

Thousand-fold Increase in Plasmonic Light Emission via Combined Electronic and Optical Excitations

Surface plasmon enhanced processes and hot-carrier dynamics in plasmonic nanostructures are of great fundamental interest to reveal light-matter interactions at the nanoscale. Using plasmonic tunnel junctions as a platform supporting both electrically and optically excited localized surface plasmons, we report a much greater (over 1000× ) plasmonic light emission at upconverted photon energies under combined electro-optical excitation, compared with electrical or optical excitation separately. Two mechanisms compatible with the form of the observed spectra are interactions of plasmon-induced hot carriers and electronic anti-Stokes Raman scattering. Our measurement results are in excellent agreement with a theoretical model combining electro-optical generation of hot carriers through nonradiative plasmon excitation and hot-carrier relaxation. We also discuss the challenge of distinguishing relative contributions of hot carrier emission and the anti-Stokes electronic Raman process. This observed increase in above-threshold emission in plasmonic systems may open avenues in on-chip nanophotonic switching and hot-carrier photocatalysis.