Costs and quality of life associated with osteoporosis-related fractures in Sweden

This prospective observational data collection study assessed the cost and quality of life related to hip, vertebral and wrist fracture 1 year after the fracture, based on a patient sample consisting of 635 male and female patients surviving a year after fracture. Data regarding resource use and quality of life related to fractures was collected by questionnaires at baseline, 4 months and 12 months. Information was collected by the use of patients' records, register sources and by asking the patient. Quality of life was estimated with the EQ-5D questionnaire. Costs were estimated from a societal perspective, including direct and indirect costs. The mean fracture-related cost the year after a hip, vertebral and wrist fracture were estimated, in euros (<euro>), at <euro>14,221, <euro>12,544 and <euro>2,147, respectively [converted from Swedish krona (SEK) at an exchange rate of 9.1268 SEK/<euro>]. The mean reduction in quality of life was estimated at 0.17, 0.26 and 0.06 for hip, vertebral and wrist fracture, respectively. Based on the results, the yearly burden of osteoporosis in Sweden could be estimated at <euro>0.5 billion (SEK 4.6 billion). The patient sample for vertebral fracture was fairly small and included a high proportion of fractures leading to hospitalization, but they indicate a higher cost and loss of quality of life related to vertebral fracture than previously perceived.

Modeling of the heat distribution in the intervertebral disk

The heat transfer equation was used to model the heat distribution in an intervertebral disk during ultrasound (US) exposure. The influence of thermal and acoustic parameters was studied to get a quantitative understanding of the heat transfer in the system. Heating of collagen to 65 degrees C or above will lead to denaturation and is believed to stabilize and contract the outer part of the disk in a herniated disk. In our model, the US intensity was approximated by a Gaussian distribution and nonlinear propagation was excluded. The effect of self-heating and cooling of the transducer was also studied. The simulations were performed using the finite element method. From this model, it can be concluded that it is possible to heat parts of the disk to treatment temperature using a focused 5-mm diameter US probe. The physical constraints on the piezocrystal set the limit of the size of the treatment volume.

Hydration characteristics of alpha-tricalcium phosphates: Comparison of preparation routes

Alpha tricalcium phosphate ( á -TCP) cement powders were obtained by solid state reaction and milling (M1) and by precipitation from aqueous solution followed by heating (M2). The materials were hydrated to form calcium-deficient hydroxyapatite (CDHA) with a 2.5 wt% solution of Na2 HPO4 (liquid to powder ratio = 0.34 ml/g, temperature = 37.5 degrees C) and subjected to isothermal calorimetry, mechanical compression tests, X-ray powder diffraction, at various times during hydration, as well as scanning electron microscopy (SEM), laser diffraction and gas adsorption. The particle characteristics of the two powders were similar, but M2 exhibited two reaction events in the thermal power curve, while M1 showed a single event. Both reaction events were attributed to á -TCP dissolution and CDHA recipitation. The minimum in the reaction rate response of M2 was probably due to the formation of a passivating product layer. No such layer was formed on the milled M1 due to its rougher surfaces. Both preparations reached a compressive strength of 30-40 MPa after 24 hr.

The economic cost of low back pain in Sweden in 2001

BACKGROUND

Low back pain (LBP) is a common cause of lost work days and disability. In 2001, expenditure for back pain represented 11% of the total costs for short-term sick leave in Sweden, and about 13% of all early retirement pensions were granted for back problems, of which LBP is the most important symptom. The magnitude of LBP as a health problem justifies a closer look at its burden of illness to society.

MATERIALS AND METHODS

We assessed the costs of LBP to society in Sweden in 2001. The study was conducted in a cost-of-illness framework, measuring both the direct costs of providing health care to LBP patients, and the indirect costs as the value of the production that is lost because people are too ill to work. The costs were estimated by a prevalence and top-down approach.

RESULTS

The total cost of LBP was 1860 million EUR in Sweden in 2001. The indirect costs due to lost productivity accounted for 84% of the total cost.

INTERPRETATION

The cost of illness due to low back pain was substantial, but does not appear to have risen during the last 10-15 years.

Multinational survey of osteoporotic fracture management

Osteoporosis is characterized by a decreased bone mass and an increased bone fragility and susceptibility to fracture. Patients with a fragility fracture at any site have an increased risk of sustaining future fractures. Orthopedic surgeons manage most of these fractures and are often the only physician seen by the patient. Mounting evidence that orthopedic surgeons are not well attuned to osteoporosis led the Bone and Joint Decade (BJD) and the International Osteoporosis Foundation (IOF) to survey 3,422 orthopedic surgeons in France, Germany, Italy, Spain, the United Kingdom, and New Zealand. The majority of the respondents in all countries had the opinion that the orthopedic surgeon should identify and initiate the assessment of osteoporosis in patients with fragility fractures. Heterogeneous practice pattern exist in different countries; however, identification and treatment of the osteoporotic patient seems to be insufficient in many areas: half of the orthopedic surgeons surveyed received little or no training in osteoporosis. Only approximately one in four orthopedic surgeons in France, the UK and New Zealand regarded themselves as knowledgeable about treatment modalities. Less than one-fifth of the orthopedic surgeons arranged for a surgically treated patient with a fragility fracture to have a bone mineral density (BMD) test. Twenty percent said that they never refer a patient after a fragility fracture for BMD. Only half of the orthopedic surgeons in southern Europe know about the importance of some external risk factors for hip fractures (cataracts, poor lighting, pathway obstacles, poor balance). In summary, this survey clearly indicates that many orthopedic surgeons still neglect to identify, assess and treat patients with fragility fractures for osteoporosis. More educational opportunities need to be offered to orthopedic surgeons through articles, web-based learning and educational seminars. Development of a simple clinical pathway from evidence-based guidelines is an important step to ensure that optimal care is provided for patients with fragility fractures.

Acrylic bone cements: clinical developments and current status: Scandinavia

This article focuses on bone cement, the cementing technique used, and their influence on aseptic loosening and infection of acrylic and joint implants--Scandinavian view.

The effect of bone quality on the stability of ankle arthrodesis. A finite element study

BACKGROUND

Despite uniform operating techniques, lack of fusion still occurs after ankle arthrodesis. Differences in the biological healing potential may be a factor but the mechanical performance of the arthrodesis construct because of varying bone quality also may be important. Internal compression techniques are preferred because of higher union rates, shorter fusion times, and fewer complications. A three-screw configuration has been shown to be more stable than a two-screw configuration, but it is not obvious when it should be used.

METHODS

Three-dimensional finite element models of intact and flat-cut ankle arthrodeses were built, using two and three screws in different configurations. Poor bone quality was simulated by decreasing Young's modulus of the bone. The constructs were loaded in torsion and dorsiflexion, and micromotions at the fusion site were measured.

RESULTS

Bone quality had a marked effect on the stability at the arthrodesis site. Inserting two screws at 30 degrees relative to the longitudinal axis of the tibia in an intact arthrodesis seemed the best option, especially as bone quality worsened. The addition of a third screw increased the stability at the arthrodesis site.

CONCLUSIONS

Overall, intact joint surfaces and three-screw fixation, with the lateral and medial screws inserted produced the most stable arthrodesis constructs when bone quality was poor. CLINICAL RELEVANCE. Ankle arthrodeses are technically demanding because of the shape and small size of the talus. Preoperative planning is an absolute necessity to determine placement and number of screws. This study shows that poor bone quality decreases the stability of the arthrodesis constructs, suggesting that an attempt should be made to create the most stable three-screw configuration. Finite element models can be used as an effective preoperative tool for planning screw number and placement.

Initial stability of ankle arthrodesis with three-screw fixation. A finite element analysis

OBJECTIVE

Compare the initial stability at the fusion site of ankle arthrodesis fixed with two and three screws.

DESIGN

Finite element models of ankle arthrodesis were developed from computed tomography images. Two-screw constructs were augmented with a third screw in different orientations and subjected to loads likely to affect the ankle postoperatively.

BACKGROUND

More stable fixation seems to increase the chance of fusion, as it minimises the motion between the tibiotalar interfaces.

METHODS

Non-linear elastic finite element analyses were performed in external torsion and dorsiflexion. The micromotions at the tibiotalar interface were computed to compare the two- and three-screw fixation in intact and flat-cut arthrodesis.

RESULTS

Adding a third screw reduced the micromotions at the fusion site. Inserting the third screw anteriorly predicted lower peak micromotions than inserting the screw posteriorly, except for the intact arthrodesis tested in dorsiflexion. Three-screw intact arthrodesis predicted lower peak micromotions than flat-cut arthrodesis.

CONCLUSIONS

Better stability was predicted for three-screw ankle arthrodesis. In flat-cut arthrodesis, a third screw inserted anteriorly performed better than a posterior screw. In intact arthrodesis, a posterior screw seemed a better option when flexion stability was the main concern. Even with three-screw fixation, the configuration of the first two-crossed screws may still be important to improve the stability at the fusion site.

Bone cement X-ray contrast media: A clinically relevant method of measuring their efficacy

It is important to compare different contrast media used in bone cement according to their ability to attenuate X-rays and thereby produce image contrast between bone cement and its surroundings in clinical applications. The radiopacity of bone cement is often evaluated by making radiographs of cement in air at an X-ray tube voltage of 40 kV. We have developed a method for ranking contrast media in bone cement simulating the clinical situation, by (1) choosing the same X-ray tube voltage as used in clinical work, and (2) using a water phantom to imitate the effects of the patients' soft tissue on the X-ray photons. In clinical work it is desirable to have low radiation dose, but high image contrast. The voltage chosen is a compromise, because both dose and image contrast decrease with higher voltage. Three contrast media (ZrO(2), BaSO(4), and Iodixanol) have been compared for degree of "image contrast." Comparing 10 wt % contrast media samples at an X-ray tube voltage of 40 kV, ZrO(2) produced higher image contrast than the other media. However, at 80 kV, using a water phantom, the results were reversed, ZrO(2) produced lower image contrast than both BaSO(4) and Iodixanol. We conclude that evaluations of contrast media should be made with voltages and phantoms imitating the clinical application.

Biodegradation and biocompatability of a calcium sulphate-hydroxyapatite bone substitute

An injectable material consisting of calcium sulphate mixed with hydroxyapatite was investigated as a possible alternative to autograft in the restoration of bone defects. The material was studied both in vitro in simulated body fluid (SBF) and in vivo when implanted in rat muscles and into the proximal tibiae of rabbits. Variation in the strength and weight of the material during ageing in SBF was measured. Tissue response, material resorption and bone ingrowth were studied in the animal models.

A good tissue response was observed in both the rat muscles and rabbit tibiae without inflammatory reactions or the presence of fibrous tissue. Ageing in SBF showed that during the first week carbonated hydroxyapatite precipitated on the surfaces of the material and this may enhance bone ingrowth.

Biodegradation and biocompatability of a calcium sulphate-hydroxyapatite bone substitute

An injectable material consisting of calcium sulphate mixed with hydroxyapatite was investigated as a possible alternative to autograft in the restoration of bone defects. The material was studied both in vitro in simulated body fluid (SBF) and in vivo when implanted in rat muscles and into the proximal tibiae of rabbits. Variation in the strength and weight of the material during ageing in SBF was measured. Tissue response, material resorption and bone ingrowth were studied in the animal models. A good tissue response was observed in both the rat muscles and rabbit tibiae without inflammatory reactions or the presence of fibrous tissue. Ageing in SBF showed that during the first week carbonated hydroxyapatite precipitated on the surfaces of the material and this may enhance bone ingrowth.

Water uptake and release from iodine-containing bone cement

Water uptake and release characteristics of PMMA cement containing the water-soluble contrast media iohexol or iodixanol have been investigated. The water uptake study revealed that iohexol had the highest uptake of water (3.7%) and that iodixanol had an uptake close to that of Palacos R (2.3% and 1.9%). The curves obtained showed the materials to follow classic diffusion theory, with an initial linearity with respect to t(1/2) making it possible to calculate the diffusion coefficients. This showed iohexol to have the lowest diffusion coefficient, Palacos R the highest, and iodixanol close to that of Palacos R. The release study showed that more iohexol than iodixanol was released from the bone cement; the long-term release was above 25 microg/mL for iohexol compared to slightly above 10 microg/mL for iodixanol. A microCT investigation showed that the risk of developing an observable radiolucent zone is negligible.

Compressive and Shear Properties of Commercially Available Polyurethane Foams

Background: The shear properties of rigid polyurethane (PU-R) foams, routinely used to simulate cancellous bone, are not well characterized. Method of approach: The present assessment of the shear and compressive properties of four grades of Sawbones “Rigid cellular” PU-R foam tested 20 mm gauge diameter dumb-bell specimens in torsion and under axial loading. Results: Shear moduli ranged from 13.3 to 99.7 MPa, shear strengths from 0.7 MPa to 4.2 MPa. Compressive yield strains varied little with density while shear yield strains had peak values with “200 kgm−3” grade. Conclusions: PU-R foams may be used to simulate the elastic but not failure properties of cancellous bone.

Bone morphology in relation to the migration of porous-coated anatomic knee arthroplasties : a roentgen stereophotogrammetric and histomorphometric study in 23 knees

The quality of the subchondral bone in total knee arthroplasty (TKA) may be important for the outcome. We correlated a histomorphologic analysis of the prosthetic bone bed to micromotion as analyzed by roentgen stereophotogrammetric analysis (RSA). Twenty-three knees, both osteo- and rheumatoid arthritic were studied. The mean migration after 1 year was 1 mm (0.21-2.68), with no correlation to the bone variables or diagnosis. One patient underwent revision after 3 years because of pain. One patient underwent revision after 15 years because of aseptic loosening. This patient appeared stable according to changes in maximum total point motion (MTPM), but the prosthesis migrated continuously according to segment motion. Prosthetic migration increased after 10 years, zones started to evolve, and the patient became symptomatic after 13 years. A biopsy of the bone bed was taken in all patients. A larger percentage of trabecular bone and a larger relative area of unmineralized osteoid surface were found in patients with rheumatoid arthritis compared with those with osteoarthritis. The latter finding is probably a result of increased bone turnover. In conclusion, no support currently exists for the idea that preoperative bone quality, evaluated as bone histomorphometry, has any impact on prosthetic micromotion in knee prostheses.

Factors influencing the compressive strength of an injectable calcium sulfate-hydroxyapatite cement

A biphasic injectable bone substitute, suitable for filling bone defects, that sets in the body, based on calcium sulfate and hydroxyapatite (HA), is presented. For applications in bone defects the compressive strength is important to assure support of the defect site during loading when the patient is weight bearing. To control the strength, the influence of four different factors; the liquid-to-powder (L/P) ratio, the HA particle morphology, the HA content and the amount of accelerator, were investigated. alpha-Calcium sulfate hemihydrate (CSH) and four different HA powders (three sintered and one spray-dried) were used. All differed in size and morphology. CSH and each HA powder were mixed together with distilled water to form the bone substitute. An accelerator, in form of calcium sulfate dihydrate, was added to the powder phase to obtain an adequate setting time. Cylindrical specimens were compression tested. A lower L/P-ratio gave stronger cement, but was more difficult to inject. The shape and the morphology of the HA particles influenced the strength, and reducing the amount of HA increased the strength. The amount of accelerator (calcium sulfate dihydrate) had no influence.

Infection and arthritis. Infection of prosthetic joints

Infection of prosthetic joints is one of the most devastating complications following replacement surgery. The size of the problem, the diagnostic puzzle, bacteriological findings and treatment modalities are highlighted.

Finite element analysis of the initial stability of ankle arthrodesis with internal fixation: flat cut versus intact joint contours

OBJECTIVE

Qualitative comparison of the initial stability provided by two joint preparation techniques and various screw configurations in ankle arthrodesis, using the finite element method.Design. A three-dimensional model of a healthy ankle was developed from computed tomography images. Two groups of models were built, one with the joint contours resected to produce flat surfaces, and the second with the joint contours preserved. In each case, a variety of screw orientations were examined.

BACKGROUND

Despite the improved results of ankle arthrodesis, failure rates due to non-union are still reported. The initial stability of the arthrodesis construct seems important in the final outcome of the fusion.

METHODS

Non-linear contact finite element analyses were performed in the arthrodesis constructs subjected to internal/external torsion and dorsiflexion. Micromotions at the bone-to-bone interface were calculated for frictionless and Coulomb friction contact, and compared for the two joint preparation techniques and screw configurations.

RESULTS

Overall lower peak micromotions were predicted when preserving the joint contours both in torsion and dorsiflexion. For both preparation techniques, the lowest micromotions tended to occur with the screws inserted at 30 degrees with respect to the long axis of the tibia, crossing above the fusion site. Inclusion of friction in the models caused a general decrease on the magnitude of the micromotions as compared to the frictionless case, but did not affect the ranking of the models.

CONCLUSIONS

The finite element method can be used as a qualitative tool to study the initial stability of ankle arthrodesis, overcoming the difficulties of measuring bone-to-bone interface micromotions experimentally. Better initial stability was predicted for ankle arthrodesis when the joint contours were preserved rather than resected. Crossing the screws above the fusion site at a steeper angle also tended to increase the stability at the fusion site.

RELEVANCE

Finite element analyses can help during the pre-operative planning of ankle arthrodesis. When bone density is not compromised, preserving the joint contour and inserting the screws at less than 45 degrees to the long axis of the tibia, crossing over the arthrodesis site, may offer better initial stability.

The effect of irradiation, annealing temperature, and artificial aging on the oxidation, mechanical properties, and fracture mechanisms of UHMWPE

UHMWPE crosslinked using Gamma radiation is believed to have improved wear properties, and this has been extensively studied during the past 10 years. Mechanical properties, oxidation, and wear properties of UHMWPE materials subjected to various thermal treatments have been investigated immediately after irradiation as well as after several years of aging. Nevertheless, the relationship between all these parameters is not yet fully understood. The aim of this study was to investigate the relationship between the thermal treatments that could be applied to irradiated UHMWPE [lower (gamma 60) or higher (gamma 150) than 140 degrees C, the melting temperature of the polymer] and the mechanical properties, the oxidation and the fracture behavior of the material. The effect of artificial aging on these properties was also investigated. This study concludes that immediately after the annealing, the mechanical properties (UTS and epsilon) of the irradiated and annealed material are improved compared with those of nonirradiated material. Although nonirradiated material has higher fracture toughness than irradiated and annealed materials, the materials break according to the same mechanism of fracture. After aging, no changes could be observed in any of the measured properties for nonirradiated material. On the other hand, important changes could be seen in both irradiated and annealed material after aging. Both UTS and epsilon decreased, much more so in the case of gamma 60. Furthermore, the aging induced a subsurface peak of oxidation in both irradiated and annealed materials, twice as intense for gamma 60 than for gamma 150. The mechanism of fracture of these materials changed drastically after aging, probably due to the presence of the oxidation peak, which seems to occur at a location where cracks initiate easily compared with the nonoxidized bulk of the material. In the case of gamma 60, it seems clear that a correlation between mechanical property, oxidation, and fracture mechanism exists. Such a relationship could not be found for gamma 150.

Factors affecting the static shear strength of the prosthetic stem-bone cement interface

Debonding of the stem-cement interface has been implicated in the initiation of failure of cemented femoral stems. The objective of this work was to examine some of the parameters which influence the interface static shear strength, including surface finish, cement type, pre-treatments and porosity. Surface finish was found to have the greatest effect on the interface strength. Increasing the surface roughness by a factor of 100 increases the interface shear strength by a factor of 20. However, increasing the surface roughness above a certain value was found to have no additional affect. This was due to failure in the cement itself rather than at the cement-stem interface. There were significant differences between some of the different cement types regarding the interface strength. Pre-heating the stem produced a six fold reduction in cement porosity at the stem-cement interface, however, resulting in only a minor influence on the static interface strength. Generally, no significant correlation was found between the cement porosity and the static interfacial shear strength.

Characterization of a novel calcium phosphate/sulphate bone cement

Apatitic cements have shown excellent biocompatibility and adequate mechanical properties but have slow resorption in the human body. To assure that new bone tissue grows into the bone defect, a certain porosity is necessary although hard to achieve in injectable cements with suitable mechanical properties. An attempt was made by mixing alpha-tricalcium phosphate (alpha-TCP), calcium sulphate hemihydrate (CSH) and an aqueous solution containing 2.5 wt% of Na(2)HPO(4). The aim was to obtain a material containing two phases: a) one apatitic phase (calcium-deficient hydroxyapatite; CDHA) and b) one resorbable phase (calcium sulphate dihydrate; CSD). alpha-TCP and CSH mixtures were produced at relative intervals of 20 wt%. The liquid-to-powder (L/P) ratio to obtain a paste was 0.32 mLg(-1). The highest compressive strength (34 MPa) was obtained for the pure alpha-TCP sample. The strength was, in a first approximation, directly correlated to the weight proportions of the powders. X-ray diffraction analysis showed that the relative intensity for CDHA increased linearly, and the one for CSD decreased exponentially, when the amount of alpha-TCP increased. Thus, CSH ceased to transform to CSD when the amount of alpha-TCP increased. Observations in environmental scanning electron microscopy confirmed the X-ray diffraction results. CSH-crystals (100 microm) were embedded in the HA-matrix permitting gradual porosity in the material when resorbed.

Ultrasound nucleolysis: an in vitro study

Thermal intradiscal therapy for chronic low back pain, using a catheter inserted into the intervertebral disc, is becoming more popular in the treatment of low back pain. The aim of this study was to investigate the possibility of heating the nucleus pulposus of the intervertebral disc with high-intensity focused ultrasound (US) or HIFU. Two specific situations were considered, invasive transducers that would be in contact with the annulus fibrosus of the disc, and noninvasive transducers that could be used externally. Theoretical simulations were performed to find the optimal parameters of US transducers and then experimental studies were done using transducers made to these specifications. These experiments confirmed that it was possible to heat the discs with HIFU. Two orthogonal transducers resulted in a superior temperature distribution than using just one transducer. It is, therefore, feasible to consider thermal treatment of the nucleus pulposus of the disc using noninvasive US.

Roentgen single-plane photogrammetric analysis (RSPA)

We present a new approach for the accurate reconstruction of three-dimensional skeletal positions using roentgen single-plane photogrammetric analysis (RSPA). This technique uses a minimum of three markers embedded in each segment which allow continuous, real-time, internal skeletal movement to be measured from single-plane images, provided that the precise distance between the markers is known.

A simulation study indicated that the error propagation in this approach is influenced by focus position, object position, the number of control points, the accuracy of the previous measurement of the distance between markers and the accuracy of image measurement. For reconstruction of normal movement of the knee with an input measurement error of sd = 0.02 mm, the rotational and translational differences between reconstructed and original movement were less than 0.27° and 0.9 mm, respectively.

Our results showed that the accuracy of RSPA is sufficient for the analysis of most movement of joints. This approach can be applied in combination with force measurements for dynamic studies of the musculoskeletal system.

Roentgen single-plane photogrammetric analysis (RSPA.) A new approach to the study of musculoskeletal movement

We present a new approach for the accurate reconstruction of three-dimensional skeletal positions using roentgen single-plane photogrammetric analysis (RSPA). This technique uses a minimum of three markers embedded in each segment which allow continuous, real-time, internal skeletal movement to be measured from single-plane images, provided that the precise distance between the markers is known. A simulation study indicated that the error propagation in this approach is influenced by focus position, object position, the number of control points, the accuracy of the previous measurement of the distance between markers and the accuracy of image measurement. For reconstruction of normal movement of the knee with an input measurement error of SD = 0.02 mm, the rotational and translational differences between reconstructed and original movement were less than 0.27 degrees and 0.9 mm, respectively. Our results showed that the accuracy of RSPA is sufficient for the analysis of most movement of joints. This approach can be applied in combination with force measurements for dynamic studies of the musculoskeletal system.

Tensile properties of a bone cement containing non-ionic contrast media

The addition of contrast media such as BaSO4 or ZrO2 to bone cement has adverse effects in joint replacements, including third body wear and particle-induced bone resorption. Ground PMMA containing particles of the non-ionic water-soluble iodine-based X-ray contrast media, iohexol (IHX) and iodixanol (IDX), has, in bone tissue culture, shown less bone resorption than commercial cements. These water-soluble non-ceramic contrast media may change the mechanical properties of acrylic bone cement. The static mechanical properties of bone cement containing either IHX or IDX have been investigated. There was no significant difference in ultimate stress between Palacos R (with 15.0 wt % of ZrO2) and plain cement with 8.0 wt % of IHX or IDX with mass median diameter (MMD) of 15.0 or 16.0 microm, while strain to failure was higher for the latter (p < 0.02). The larger particles (15.0 or 16.0 microm) gave significantly higher (p < 0.001) ultimate tensile strengths and strains to failure than smaller sizes (2.4 or 3.6 microm). Decreasing the amount of IHX from 10.0 wt % to 6.0 wt % gave a higher ultimate tensile strength (p < 0.001) and strain to failure (p < 0.02). Scanning electron microscopy (SEM) showed the smaller contrast media particles attached to the surface of the polymer beads, which may prevent areas of the acrylate bead surface from participating in the polymerization. In conclusion, the mechanical properties of bone cement were influenced by the size and amount of contrast medium particles. By choosing the appropriate amount and size of particles of water-soluble non-ionic contrast media the mechanical properties of the new radio-opaque bone cement can be optimized, thus reaching and surpassing given regulatory standards.

The Swedish Knee Arthroplasty Register 1975-1997: an update with special emphasis on 41,223 knees operated on in 1988-1997

From 1975, when the Swedish Knee Arthroplasty Register (SKAR) started, until the end of 1997, 57,533 primary arthroplasties and revisions have been registered. Recently, the register underwent a comprehensive validation and update regarding revisions. We now report on general demographic and epidemiological data for the whole period and on the survivorship of arthroplasties performed in Sweden during 1988-1997. During this 10-year period, 41,223 primary knee arthroplasties were performed on 34,877 patients. We found, as in our earlier reports, that survivorship was affected by patient-, time-, implant- and method-related factors but, apart from an overall higher cumulative revision rate, general conclusions reported from the register in recent years appeared to be unaffected.

Contamination of polyethylene cups with polymethyl methacrylate particles: an experimental study

The articulating surfaces of 6 ultra-high molecular weight polyethylene cups were exposed to curing polymethyl methacrylate (PMMA) bone-cement and examined with scanning electron microscopy and laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS). Three of the cups were exposed to blood and bone-cement, and the rest were exposed to bone-cement only. After removal of the bone-cement bulk, PMMA particles were found and identified in all 6 cups. The particles were verified by identifying zirconium with energy-dispersive x-ray fluorescence spectroscopy in 5 cups and with LA-ICPMS in 1 cup. The degree of surface contamination was estimated with LA-ICPMS. The number of zirconium-containing particles detected was on average 10 to 20/mm2. PMMA bone-cement left in polyethylene cups during polymerization can contaminate the articulating surface with adherent PMMA particles.

Appropriate questionnaires for knee arthroplasty

The Swedish Knee Arthroplasty Registry (SKAR) has recorded knee arthroplasties prospectively in Sweden since 1975. The only outcome measure available to date has been revision status. While questionnaires on health outcome may function as more comprehensive endpoints, it is unclear which are the most appropriate. We tested various outcome questionnaires in order to determine which is the best for patients who have had knee arthroplasty as applied in a cross-sectional, discriminative, postal survey.

Four general health questionnaires (NHP, SF-12, SF-36 and SIP) and three disease/site-specific questionnaires (Lequesne, Oxford-12, and WOMAC) were tested on 3600 patients randomly selected from the SKAR. Differences were found between questionnaires in response rate, time required for completion, the need for assistance, the efficiency of completion, the validity of the content and the reliability. The mean overall ranks for each questionnaire were generated. The SF-12 ranked the best for the general health, and the Oxford-12 for the disease/site-specific questionnaires. These two questionnaires could therefore be recommended as the most appropriate for use with a large knee arthroplasty database in a cross-sectional population.

Appropriate questionnaires for knee arthroplasty. Results of a survey of 3600 patients from The Swedish Knee Arthroplasty Registry

The Swedish Knee Arthroplasty Registry (SKAR) has recorded knee arthroplasties prospectively in Sweden since 1975. The only outcome measure available to date has been revision status. While questionnaires on health outcome may function as more comprehensive endpoints, it is unclear which are the most appropriate. We tested various outcome questionnaires in order to determine which is the best for patients who have had knee arthroplasty as applied in a cross-sectional, discriminative, postal survey. Four general health questionnaires (NHP, SF-12, SF-36 and SIP) and three disease/site-specific questionnaires (Lequesne, Oxford-12, and WOMAC) were tested on 3600 patients randomly selected from the SKAR. Differences were found between questionnaires in response rate, time required for completion, the need for assistance, the efficiency of completion, the validity of the content and the reliability. The mean overall ranks for each questionnaire were generated. The SF-12 ranked the best for the general health, and the Oxford-12 for the disease/site-specific questionnaires. These two questionnaires could therefore be recommended as the most appropriate for use with a large knee arthroplasty database in a cross-sectional population.

The routine of surgical management reduces failure after unicompartmental knee arthroplasty

A total of 10,474 unicompartmental knee arthroplasties was performed for medial osteoarthritis in Sweden between 1986 and 1995. We sought to establish whether the number of operations performed in an orthopaedic unit affected the incidence of revision. Three different implants were analysed: one with a high revision rate, known to have unfavourable mechanical and design properties; a prosthesis which is technically demanding with a known increased rate of revision; and the most commonly used unicompartmental device. Most of the units performed relatively few unicompartmental knee arthroplasties per year and there was an association between the mean number carried out and the risk of later revision. The effect of the mean number of operations per year on the risk of revision varied. The technically demanding implant was most affected, that most commonly used less so, and the outcome of the unfavourable design was not influenced by the number of operations performed. For unicompartmental arthroplasty, the long-term results are related to the number performed by the unit, probably expressing the standards of management in selecting the patients and performing the operation.

The routine of surgical management reduces failure after unicompartmental knee arthroplasty

A total of 10474 unicompartmental knee arthroplasties was performed for medial osteoarthritis in Sweden between 1986 and 1995. We sought to establish whether the number of operations performed in an orthopaedic unit affected the incidence of revision. Three different implants were analysed: one with a high revision rate, known to have unfavourable mechanical and design properties; a prosthesis which is technically demanding with a known increased rate of revision; and the most commonly used unicompartmental device.

Most of the units performed relatively few unicompartmental knee arthroplasties per year and there was an association between the mean number carried out and the risk of later revision. The effect of the mean number of operations per year on the risk of revision varied. The technically demanding implant was most affected, that most commonly used less so, and the outcome of the unfavourable design was not influenced by the number of operations performed.

For unicompartmental arthroplasty, the long-term results are related to the number performed by the unit, probably expressing the standards of management in selecting the patients and performing the operation.

Past incidence and future demand for knee arthroplasty in Sweden: a report from the Swedish Knee Arthroplasty Register regarding the effect of past and future population changes on the number of arthroplasties performed

By combining data from the Swedish Knee Arthroplasty Register and Swedish census registers we have calculated the past age-specific incidence of primary knee arthroplasties and predicted the demand. During the last 20 years, osteoarthrosis has accounted for the largest increase in number of knee arthroplasties while operations for rheumatoid arthritis remained constant. The mean yearly number of operations between the periods 1976-1980 and 1996-1997 increased more than five-fold, while only 6% of that increase could be explained by changes in the age-profile of the population. Most operations were performed on persons of 65 years and older who also had the largest increase in incidence. By using the incidences for 1996 and 1997 and taking into account the expected future changes in the age profile of the Swedish population, we estimate that, in the absence of an effective preventive treatment, the number of knee arthroplasties will increase by at least one third until 2030.

Integrated system for preparation of bone cement and effects on cement quality and environment

We developed a prepacked mixing system for the preparation of bone cement. The system is based on mixing and collection of bone cement under a vacuum and serves as both the storage and mixing device for the cement components, thereby minimizing the exposure of the operating staff to the monomer and the risk for contamination of the cement during preparation. We evaluated the system using Palacos R and Simplex P. The cement produced was compared with cement obtained from a commercially available mixing system. Temperature evolution during curing, handling characteristics, density, and porosity of the cement obtained were analyzed. The results showed that the experimental system produces cement with physical properties (i.e., setting times and temperature, porosity, and density) equal to or better than those obtained with commercially available systems. Reducing the amount of monomer in the experimental system led to a reduction of the curing temperature without compromising the physical properties of the cements.

Patient satisfaction after knee arthroplasty: a report on 27,372 knees operated on between 1981 and 1995 in Sweden

During a validation process of the Swedish Knee Arthroplasty Register (SKAR), living registered patients were sent a questionnaire to ask if they had been reoperated on. This gave an opportunity to pose a simple four-point question with respect to patient satisfaction which 95% of patients answered. We analyzed the answers of patients operated on between 1981 and 1995 and found that only 8% of the patients were dissatisfied regarding their knee arthroplasty 2-17 years postoperatively. The satisfaction rate was constant, regardless of when the operation had been performed during the 15-year period. The proportion of satisfied patients was affected by the preoperative diagnosis, patients operated on for a long-standing disease more often being satisfied than those with a short disease-duration. There was no difference in proportions of satisfied patients, whether they had primarily been operated on with a total knee arthroplasty (TKA) or a medial unicompartmental arthroplasty (UKA). For TKAs performed with primary patellar resurfacing, there was a higher ratio of satisfied patients than for TKAs not resurfaced, but this increased ratio diminished with time passed since the primary operation. Unrevised knees had a higher proportion of satisfied patients than knees that had been subject to revision, and among patients revised for medial UKA, the proportion of satisfied patients was higher than among patients revised for TKA. We conclude that satisfaction after knee arthroplasty is stable and long-lasting in unrevised cases and that even after revision most patients are satisfied.

Translation and validation of the Oxford-12 item knee score for use in Sweden

The Oxford-12 Item Knee Score is a recently developed and validated patient-completed outcome measure designed specifically for use with knee arthroplasty in the United Kingdom. We have translated this questionnaire into Swedish and tested the validity and reliability of the translated version in a cross-sectional study by a postal survey to 1,200 randomly selected patients from the Swedish Knee Arthroplasty Register. Swedish versions of the WOMAC, Nottingham Health Profile, SF-36, SF-12, and the Sickness Impact Profile were employed in the validation process. We also tested feasibility and patient-burden parameters. The translated version appeared to be linguistically and culturally equivalent to the original version with good validity and reliability. Indirect measures of responsiveness indicated that it is at least as responsive to relevant knee arthroplasty patient states as the previously validated Swedish version of the WOMAC. Application of the translated questionnaire to this population is feasible with minimal imposed patient-burden. The Swedish translation of the Oxford-12 Item Knee Score is a valid and reliable tool for outcome studies on knee arthroplasty patients.

Validation of the Swedish Knee Arthroplasty Register: a postal survey regarding 30,376 knees operated on between 1975 and 1995

The Swedish Knee Arthroplasty Register is dependent on the participating clinics regarding accuracy of information. As the register is prospective, and since revision is used as the endpoint in survival analyses, it is important that all revisions of registered primary arthroplasties are reported. To validate the register, we sent a questionnaire to all living patients with 30,796 knees registered as having been operated on from 1975-1995. Of living patients, 99% could be located and 93% answered. We found that one fifth of the revisions had not been reported and that relatively fewer revisions were lost to follow-up during the first decade of the register than in the following years. To investigate whether the Patient Administrative System (PAS), a database based on ICD coding and run by the Swedish health authorities, could be used to locate missing revisions found by the postal survey, we compared this database with the Swedish Knee Arthroplasty Register. 84% of the missing revisions revealed by the postal survey were found by using this method. Hence after the survey and the use of the PAS to find unreported revisions in deceased and non-responding patients, we estimate that 94% of all revisions are accounted for. Apart from a generally higher cumulative revision rate, conclusions reported from the Register in recent years regarding survivorship seem to be unaffected by the underreporting.

Interface gap after implantation of a cemented femoral stem in pigs

We studied the interface gap around cemented femoral stems. Fresh pig femora were used. Bone cement mixed under vacuum or at atmospheric pressure was injected into the femoral canal and a cobalt chrome stem was then implanted. The femora were sectioned transversely from the minor trochanter and distally by using a high-pressure water cutter. Most of the interfaces had intimate contact. However, in all specimens, small gaps were found at the bone-cement and cement-stem interfaces. The gaps at the interfaces between the bone and cement and the cement and stem were measured, using a computerized video digital system. They occupied about 10% of the circumference at the bone-cement interface and about 15% of the circumference at the cement-stem interface, irrespective of the mixing procedures. Most gaps were less than 100 mu at the interfaces. In conclusion, cemented implants in the animal model showed that small gaps are found at the interfaces directly after implantation. These gaps may be weak points and initiate debonding when loading the prostheses.

Use of unicompartmental instead of tricompartmental prostheses for unicompartmental arthrosis in the knee is a cost-effective alternative. 15,437 primary tricompartmental prostheses were compared with 10,624 primary medial or lateral unicompartmental prostheses

Unicompartmental knee arthroplasty (UKA) is known to have a higher risk of revision than tricompartmental arthroplasty (TKA), while UKA implants are generally less expensive than TKA implants. We estimated the costs of implants and hospital stay of both procedures and related the cost difference at primary operation to the difference in number of revisions to be expected. We compared 15,437 primary TKAs and 10,624 primary medial or lateral UKAs. The operations were all done on patients with arthrosis during 1985-1995. By matching patients in the Swedish Patient Administration System with the Swedish National Knee Arthroplasty Register, the groups could be compared regarding the length of the hospital stay. The cumulative revision rate (CRR) and the relative risk of revision were calculated with survival statistics, as well as the risk of a second revision and the risk of infection. The weighted mean cost of the commonest implants in each group was used as an estimate of the implant cost. We found that the TKA patients were, on average, 2 years older at operation and had a lower CRR than the UKA patients-i.e., 10-year CRR of 12% and 16%, respectively. After adjusting for age, gender and year of operation, UKA patients were found to have a 2-day shorter hospital stay and fewer serious complications than TKA patients. The mean estimated cost of a unicompartmental implant was 57% of that of a tricompartmental implant. We conclude, that by using UKA instead of TKA in appropriate patients, money can be saved, even after taking into account the increased number of revisions to be expected.

Revision of unicompartmental knee arthroplasty: outcome in 1,135 cases from the Swedish Knee Arthroplasty study

From 1975 through 1995, 45,025 knee arthroplasties were recorded in the prospective Swedish Knee Arthroplasty study. By the end of 1995, 1,135 of 14,772 primary unicompartmental knee arthroplasties (UKA) for localized, mainly medial arthrosis had been revised. The Marmor/Richards and St. Georg sledge/Endo-Link prostheses were used in 65%. Mean age at revision was 72 (71) years. 232 revisions were performed as an exchange UKA (partial in 97) and 750 as a total knee arthroplasty (TKA). 153 were revised by other modes. In medial UKA, the indication for revision was component loosening in 45% and joint degeneration in 25% and in lateral UKA, the corresponding figures were 31% and 35%, respectively. In 94 cases, unicompartmental components were added to the initially untreated compartment, in 14 with partial exchange of a component. The CRRR was estimated using survival statistics. After only 5 years, the risk of having a second revision was more than three times higher for failed UKAs revised to a new UKA (cumulative rerevision rate (CRRR 26%) than for those revised to a TKA (CRRR 7%). This difference remained, even if those revised before 1985, when modern operating technique was introduced, were excluded (CRRR 31% and 5%, respectively). UKA is a safe primary procedure, when performed with well-designed components and modern surgical technique. It gives documented good patient satisfaction, range of motion, pain relief and relatively few serious complications. However, once failed, the knee should be revised to a TKA. This applies to most modes of failure. Not even joint degeneration of the unoperated compartment can be safely treated by adding contralateral components; CRRR after this procedure was 17%, while it was 7% when converted to a TKA.

Renal dysfunction after total knee replacement is not aggravated by bone cement

BACKGROUND

Total knee replacement (TKR) has been associated with postoperative renal dysfunction. The use of monomeric methylmethacrylate (MMA) bone cement causes hypotension by several mechanisms.

METHODS

In 30 patients undergoing TKR with (n = 16), or without (n = 14) bone cement, serum levels of creatinine, cystatin C and creatine kinase (CK) and urinary levels of creatinine and markers for glomerular (albumin, IgG) and tubular (protein HC) function were recorded preoperatively and on days 1, 2, 4 and 8 postoperatively.

RESULTS

There were no changes in serum creatinine. Both groups had a transient, 5-fold rise in CK and a continuous increase in cystatin C. The urinary concentration of proteins increased postoperatively with a peak in the glomerular markers on day 1 and in the tubular marker on day 2. There were no significant differences in proteinuria between the groups. The 95% CIs for the difference in the means of the AUCs of the logarithmically transformed values for the proteins were never more than 19%. On day 8 all proteins had returned to their preoperative levels.

CONCLUSION

Postoperatively, there was a transient increased leakage of proteins, indicating glomerular and tubular dysfunction. This was not influenced by the use of MMA bone cement.

Knee arthroplasty in rheumatoid arthritis. A report from the Swedish Knee Arthroplasty Register on 4,381 primary operations 1985-1995

The Swedish Knee Arthroplasty Register has data on 4,381 primary operations performed 1985-1995 for rheumatoid arthritis. Of these, 192 were performed with unicompartmental prostheses and 4143 with tricompartmental. 77% were women and the mean age was 66 years. There were 126 first, 20 second, and 1 third revision in tricompartmental arthroplasties, mainly for loosening, infection and patellar problems. There were 38 first, 3 second, and 1 third revision in unicompartmental arthroplasties, mainly for progression of RA and loosening. Cumulative revision rates (Kaplan-Meier) were calculated. Tricompartmental knees had a 10-year cumulative revision rate of 5% and uni-knees 25%. Patients treated before 1990, men and patients younger than 55 had higher revision rates than patients treated after 1990, women and older patients, respectively. Cemented tibial components resulted in lower revision rates than uncemented ones. There was no significant difference in revision rates between patellar replaced and unreplaced knees or between the 9 commonest implant types.