2D nanomaterials for realization of flexible and wearable gas sensors: A review

Gas sensors are extensively employed for monitoring and detection of hazardous gases and vapors. Many of them are produced on rigid substrates, but flexible and wearable gas sensors are needed for intriguing usage including the internet of things (IoT) and medical devices. The materials with the greatest potential for the fabrication of flexible and wearable gas sensing devices are two-dimensional (2D) semiconducting nanomaterials, which consist of graphene and its substitutes, transition metal dichalcogenides, and MXenes. These types of materials have good mechanical flexibility, high charge carrier mobility, a large area of surface, an abundance of defects and dangling bonds, and, in certain instances adequate transparency and ease of synthesis. In this review, we have addressed the different 2D nonmaterial properties for gas sensing in the context of fabrication of flexible/wearable gas sensors. We have discussed the sensing performance of flexible/wearable gas sensors in various forms such as pristine, composite and noble metal decorated. We believe that content of this review paper is greatly useful for the researchers working in the research area of fabrication of flexible/wearable gas sensors.

Cellulose nanofiber/MXene (Ti3C2Tx)/liquid metal film as a highly performance and flexible electrode material for supercapacitors

In recent times, there has been significant interest in the utilization of cellulose nanofiber (CNF) films as the foundation for supercapacitors due to their three-dimensional structure, flexibility and eco-friendliness. An ultrasonic and vacuum filtration method was used to prepare a hybrid film consisting of MXene (Ti3C2Tx), CNF and liquid metal (LM). The combination of CNF and LM with MXene produces a porous structure with higher electrical conductivity, which facilitates the transportation of ions and electrons within the composition and confers the material with heightened electrochemical properties. The CNF/MXene/LM electrode has a significant area capacitance of 871.3 mF cm-2 at a current density of 5 mA cm-2. The hybrid film demonstrates excellent stability, maintaining a high conductivity of 546.4 S∙cm-1 and retaining 96.9 % capacitance after 2000 cycles at a current density of 10 mA cm-2. By utilizing the thin film as an electrode, a high-performance quasi-solid supercapacitor was fabricated, with a remarkably thin thickness of only 0.319 mm. Supercapacitors show exceptional electrical properties, including a surface-specific capacitance of 188.2 mF cm-2 at a current density of 5 mA cm-2. This study indicates that flexible electrodes made from cellulose nanofiber have extensive potential in the realm of supercapacitors.

MXene-based polysaccharide aerogel with multifunctional enduring antimicrobial effects for infected wound healing

Wound infection is a predominant etiological factor contributing to delayed wound healing in open wounds. Hence, it holds paramount clinical significance to devise wound dressings endowed with superior antibacterial properties. In this study, a Schiff base-crosslinked aerogel comprising sodium alginate oxide (OSA), carboxymethyl chitosan (CMCS), and Nb2C@Ag/PDA (NAP) was developed. The resultant OSA/CMCS-Nb2C@Ag/PDA (OC/NAP) composite aerogel exhibited commendable attributes including exceptional swelling characteristics, porosity, biocompatibility, and sustained antimicrobial efficacy. In vitro antimicrobial assays unequivocally demonstrated that the OC/NAP composite aerogel maintained nearly 100 % inhibition of Staphylococcus aureus and Escherichia coli under an 808 nm laser even after 25 h. Crucially, the outcomes of in vivo infected wound healing experiments demonstrated that the wound healing rate of the OC/NAP composite aerogel group reached approximately 100 % within a span of 14 days, which was significantly greater than that of the blank control group. In vitro and in vivo hemostatic experiments also revealed that the composite aerogel had excellent hemostatic properties. The results of this study demonstrate the remarkable potential of OC/NAP aerogel as a multifunctional clinical wound dressing, especially for infected wounds.

Construction of surface-rich MoS2 nanoflowers decorated on 2D layered MXene nanohybrid heterostructure for highly efficient and rapid degradation of oxytetracycline

In this study, we successfully developed a hybrid architecture referred to as MoS2@MX, involving the integration of MoS2 layered onto MXene using a straightforward co-precipitation method. This innovative hybrid photocatalyst exhibited remarkable efficiency in removing oxytetracycline (OTC) molecules from aqueous solutions under visible-light irradiation. During the photocatalytic process, both MoS2 and MX played distinct yet complementary roles. MoS2 facilitated efficient electron transfer, while MX contributed to the generation of radicals. This unique collaboration resulted in a noteworthy 99 % oxidation efficiency for OTC degradation within a brief 60 min of visible light exposure in an aqueous environment. The radicals 1O2 and •OH were identified as the principal drivers behind OTC degradation, underscoring the vital role of the hybrid material. Mechanistically, the degradation of OTC involved several key steps, including C-H bond cleavage, de-carboxylation, C-N bond oxidation, and de-chlorination. Importantly, the MoS2@MX hybrid composite demonstrated remarkable stability, maintaining a noteworthy photocatalytic efficiency of 89 % for targeted OTC removal after undergoing five consecutive cycles. In conclusion, this study emphasizes the potential of the MoS2@MX hybrid material as an effective agent for degrading organic OTC compounds within aquatic environments. The hybrid's multifaceted roles and exceptional performance suggest promising applications in sustainable water treatment.

Impact of UV radiation on Mxene-mediated tubulin dissociation and mitochondrial apoptosis in breast cancer cells

Breast cancer is a global health concern that requires personalized therapies to prevent relapses, as conventional treatments may develop resistance over time. Photothermal therapy using spectral radiation or intense light emission is a broad-spectrum treatment that induces hyperthermia-mediated cancer cell death. MXene, a two-dimensional material, has been reported to have potential biological applications in photothermal therapy for cancer treatment. In this study, we investigated the apoptotic activity of MXene and UV-irradiated MXene in MCF-7 breast cancer cells by treating them with varying concentrations of MXene. The cytotoxicity of MXene and UV was evaluated by analyzing cellular morphology, nuclei condensation, caspase activation, and apoptotic cell death. We also assessed the effect of the combined treatment on the expression and cellular distribution of Tubulin, a key component of microtubules required for cell division. At low concentrations of MXene (up to 100 µg/ml), the level of cytotoxicity in MCF-7 cells was low. However, the combined treatment of MXene and UV resulted in a synergistic increase in cytotoxicity, causing rounded cellular morphology, condensed nuclei, caspase activation, and apoptotic cell death. Furthermore, the treatment reduced Tubulin protein expression and cellular distribution, indicating a potent inducer of cell death with potential application for cancer treatment. The study demonstrates that the combined treatment of MXene and UVB irradiation is a promising strategy for inducing apoptotic cell death in breast cancer cells, suggesting its potential as a therapeutic intervention for breast cancer.

3D Printed Photothermal Scaffold Sandwiching Bacteria Inside and Outside Improves The Infected Microenvironment and Repairs Bone Defects

Bone infection is one of the most devastating orthopedic outcomes, and overuse of antibiotics may cause drug-resistance problems. Photothermal therapy(PTT) is a promising antibiotic-free strategy for treating infected bone defects. Considering the damage to normal tissues and cells caused by high-temperature conditions in PTT, this study combines the antibacterial property of Cu to construct a multi-functional Cu2 O@MXene/alpha-tricalcium phosphate (α-TCP) scaffold support with internal and external sandwiching through 3D printing technology. On the "outside", the excellent photothermal property of Ti3 C2 MXene is used to carry out the programmed temperature control by the active regulation of 808 nm near-infrared (NIR) light. On the "inside", endogenous Cu ions gradually release and the release accumulates within the safe dose range. Specifically, programmed temperature control includes brief PTT to rapidly kill early bacteria and periodic low photothermal stimulation to promote bone tissue growth, which reduces damage to healthy cells and tissues. Meanwhile, Cu ions are gradually released from the scaffold over a long period of time, strengthening the antibacterial effect of early PTT, and promoting angiogenesis to improve the repair effect. PTT combined with Cu can deliver a new idea forinfected bone defects through in vitro and vivo application.

Engineered Bio-Heterojunction Confers Extra- and Intracellular Bacterial Ferroptosis and Hunger-Triggered Cell Protection for Diabetic Wound Repair

Nanomaterial-mediated ferroptosis has garnered considerable interest in the antibacterial field, as it invokes the disequilibrium of ion homeostasis and boosts lipid peroxidation in extra- and intracellular bacteria. However, current ferroptosis-associated antibacterial strategies indiscriminately pose damage to healthy cells, ultimately compromising their biocompatibility. To address this daunting issue, this work has designed a precise ferroptosis bio-heterojunction (F-bio-HJ) consisting of Fe2 O3 , Ti3 C2 -MXene, and glucose oxidase (GOx) to induce extra-intracellular bacteria-targeted ferroptosis for infected diabetic cutaneous regeneration. Fe2 O3 /Ti3 C2 -MXene@GOx (FMG) catalytically generates a considerable amount of ROS which assaults the membrane of extracellular bacteria, facilitating the permeation of synchronously generated Fe2+ /Fe3+ into bacteria under near-infrared (NIR) irradiation, causing planktonic bacterial death via ferroptosis, Fe2+ overload, and lipid peroxidation. Additionally, FMG facilitates intracellular bacterial ferroptosis by transporting Fe2+ into intracellular bacteria via inward ferroportin (FPN). With GOx consuming glucose, FMG creates hunger protection which helps macrophages escape cell ferroptosis by activating the adenosine 5'-monophosphate (AMP) activated protein kinase (AMPK) pathway. In vivo results authenticate that FMG boosts diabetic infectious cutaneous regeneration without triggering ferroptosis in normal cells. As envisaged, the proposed tactic provides a promising approach to combat intractable infections by precisely terminating extra-intracellular infection via steerable ferroptosis, thereby markedly elevating the biocompatibility of therapeutic ferroptosis-mediated strategies.

Constructing high-density crack-microstructures within MXene interlayers for ultrasensitive and superhydrophobic cellulosic fibers-based sensors

Incorporating biopolymers into two-dimensional transition metal carbides and/or nitrides (2D MXene) has been demonstrated as an effective strategy to improve the mechanical behaviors of MXene-based composites. However, the insulate nature of biopolymers inevitably deteriorated the electrical conductivity and the sensitivity of assembled sensors. Herein, a novel cellulose nanofiber (CNF)/MXene/carbon black (CB) composite was demonstrated as the conductive layer in eco-friendly cellulose paper-based sensors by intercalating the CB into the MXene/CNF interlayer, followed by coating hydrophobic SiO2 for encapsulation. Befitting from the high-density crack-microstructures between CB and MXene, the fabricated superhydrophobic paper CB/CNF/MXene/SiO2 sensor delivered ultrahigh sensitivity of 729.52 kPa-1, low detect limit of 0.29 Pa, rapid response time of 80 ms and excellent stability over 10,000 cycles. Moreover, the fabricated sensor was capable of detecting the physiological parameter of human (e.g. huge/subtle movements) and spatial pressure distribution. Furthermore, the presence of SiO2 layer endowed the sensor with superhydrophobic performance (water contact angle ∼158.2 o) and stable electrical signals under high moisture conditions or even under water. Our work proposed a novel strategy to boost the sensitivity of MXene-based conductive layer in flexible electronic devices.

Solar-driven surface-heating membrane distillation using Ti3C2Tx MXene-coated spacers

The emergence of two-dimensional (2D) MXenes as efficient light-to-heat conversion materials offers significant potential for solar-based desalination, particularly in photothermal interfacial evaporation, enabling cost-effective solar-powered membrane distillation (MD). This study investigates solar-powered MD afforded by a photothermally functionalized spacer, which is built by spray-coating Ti3C2Tx MXene sheets on metallic spacers. 2D Ti3C2Tx MXene gives an ultrahigh photothermal conversion efficiency; thereby, by Ti3C2Tx MXene-coated metallic spacer, this rationally designed spacer allows for a localized photothermal conversion and interfacial feed heating effect on the membrane surface, especially for MD operation. As a feed spacer and a photothermal element, Ti3C2Tx MXene-coated metallic spacer exhibited stable enhanced water flux of up to 0.36 kg·m-2h-1 under one sun illumination for a feed salinity of 35 g·L-1, corresponding energy conversion efficiency of 28.3 %. Overall, the developed photothermal Ti3C2Tx MXene-coated spacers displayed great potential in enhancing the performance, scalability, and feasibility of solar-driven MD process, paving the way for further development of photothermal elements that can be implemented in solar MD applications.

Hydrophobic modification of cellulose nanofibers by gallic acid and the application in pressure sensing

Via rational molecular structure design and using gallic acid (GA) for hydrophobic modification of cellulose nanofibers (CNF), the "polymer dipole" CNF-GA with hydrophilic main chains and hydrophobic side chains was prepared, which improved the poor piezoelectric properties of CNF used for preparing pressure sensors. Due to the appearance of the side chains, the elongation at break of the CNF-GA-2, compared with CNF, was enhanced by 186 %, and the excellent tensile strength, puncture load, and tearing strength were displayed. Moreover, the significant glass transition temperature (Tg) near the human body temperature was exhibited for CNF-GA, making it possible to be applied in temperature sensing. Most importantly, the CNF-GA-2 showed the maximum hydrophobicity, with a contact angle of 76.77°. Finally, the CNF-GA-2/MXene nanocomposite film was prepared by the CNF-GA-2 with MXene through vacuum filtration. The results indicated that the film had excellent piezoelectric properties (d33 = 63.283), the generated stable induced voltage (125.6 mV), the preferable piezoresistive performance (ΔR/R0 = 2.15), the fast response/recovery time (48/61 ms), which could achieve dynamic and static responses. Moreover, this film could be used for real-time detection of limb movements (such as wrists).

Natural lignocellulosic kapok fiber/MXene constructed hydrogel evaporators for high efficiency solar steam generation

Solar-driven interfacial evaporation (SDIE) is a green and sustainable technique for desalination. Hydrogel composite evaporators have been widely used for SDIE, but it is still challenging for the hydrogel evaporators to achieve uniform distribution of the light absorbing nanomaterials and at the same time possess satisfactory evaporation rate, durability and environmental applicability. We developed a 3D hydrogel evaporator with an asymmetric structure for high-efficiency SDIE. Natural kapok fibers, an important lignocellulosic plant fiber with a hollow structure, are decorated with MXene nanosheets for construction of one-dimensional photothermal conversion network. The top composite hydrogel serves as the light-absorption layer where MXene-modified kapok fibers are evenly dispersed in PVA hydrogel, while the bottom PVA hydrogel with an oriented structure acts as water delivery path. The evaporator exhibits a high solar evaporation rate and efficiency (2.49 kg·m-2·h-1 and 91.5 %, respectively) under one sun irradiation (1 kW·m-2). Even in a high salinity brine, emulsion and corrosive solutions, the evaporator can work normally with a slightly decreased evaporation rate. The 3D hydrogel evaporator with long-term stability and durability shows promising applications in purification of seawater and different waste water.

MXene-NH2/chitosan hemostatic sponges for rapid wound healing

Effective control of wound bleeding and sustained promotion of wound healing remain a major challenge for hemostatic materials. In this study, the hemostatic sponge with controllable antibacterial and adjustable continuous promotion of wound healing (CMNCu) was prepared by chitosan, aminated MXene and copper ion. Interestingly, the internal topological point-line-surface interaction endowed the CMN-Cu sponge longitudinal staggered tubular porous microstructure, combined with the lipophilic properties obtained by modified MXene, which greatly improved its flexibility, wet elasticity and blood enrichment capacity. In addition, the sponge achieved controlled release of active ingredients, which made it present highly effective antibacterial activity and long-lasting ability to promote wound healing. In vitro and in vivo experiments confirmed that CMN-Cu sponge presented high-efficient hemostatic performance. Last but not least, a series of cell experiments showed that the CMN-Cu sponge had excellent safety as a hemostatic material.

MXene nanosheet-derived N, S-codoped graphene quantum dots for ultrasensitive and selective detection of 3-nitro-l-tyrosine in human serum

3-Nitro-l-tyrosine (3NT) is an oxidative stress metabolite associated with neurodegenerative diseases such as Parkinson's disease and rheumatoid arthritis. In this study, the N, S-co-doped graphene quantum dots (NSGQDs) derived from nitrogen-doped Ti3C2Tx MXene nanosheet via the hydrothermal method in the presence of mercaptosuccinic acid was synthesized as an optical sensing probe to detect 3NT in human serum. Tetramethyl ammonium hydroxide, the nitrogen source and delamination agent, was used to prepare nitrogen-doped MXene nanosheets via one step at room temperature. The as-prepared NSGQDs are uniform with an average size of 1.2 ± 0.6 nm, and can be stable in aqueous solution for at least 90 d to serve as the fluorescence probe. The N atoms in N-MXene reduce the restacking and aggregation of MXene nanosheets, while the sulfur dopant in NSGQDs increases the quantum yield from 6.2 to 12.1 % as well as enhances the selectivity of 3NT over the other 12 interferences via coordination interaction with nitro group in 3NT. A linear range of 0.02-150 μM in PBS and 0.05-200 μM in human serum with a recovery of 97-108 % for 3NT detection is observed. Moreover, the limit of detection can be lowered to 4.2 and 7 nM in PBS and 1 × diluted human serum, respectively. Results obtained clearly indicate the potential application of the N-Ti3C2Tx derived NSGQD for effective detection of 3NT, which can open a window for the synthesis of doped GQDs via 2D MXene materials for ultrasensitive and selective detection of other biometabolites and biomarkers of neurodegenerative diseases in biological fluids.

2D MXenes and their composites; design, synthesis, and environmental sensing applications

Novel 2D layered MXene materials were first reported in 2011 at Drexel University. MXenes are widely used in multidisciplinary applications due to their anomalous electrical conductivity, high surface area, and chemical, mechanical, and physical properties. This review summarises MXene synthesis and applications in environmental sensing. The first section describes different methods for MXene synthesis, including fluorinated and non-fluorinated methods. MXene's layered structure, surface terminal groups, and the space between layers significantly impact its properties. Different methods to separate different MXene layers are also discussed using various intercalation reagents and commercially synthesized MXene without compromising the environment. This review also explains the effect of MXene's surface functionalization on its characteristics. The second section of the review describes gas and pesticide sensing applications of Mxenes and its composites. Its good conductivity, surface functionalization with negatively charged groups, intrinsic chemical nature, and good mechanical stability make it a prominent material for room temperature sensing of environmental samples, such as polar and nonpolar gases, volatile organic compounds, and pesticides. This review will enhance the young scientists' knowledge of MXene-based materials and stimulate their diversity and hybrid conformation in environmental sensing applications.

Coupling experimental with simulation studies into the impact factors and reaction mechanism of sawdust char pressured hydrogasification on K-modified transition metal composite catalysts

The utilization of biomass char was hindered by the low gasification activity due to thick ring structures and unclear gasification mechanism. Herein, the mechanism was elucidated by experimental and DFT to improve the activity. The results demonstrated that temperature increased the gasification activity but did not changed the order of gasification activity of samples. Pressure dominated the position of the highest point of instantaneous CH4 yield, and high pressure enhanced carbon conversion by 81.72 % and 7.32 times. Moreover, KNi exhibited an uppermost catalytic activity with the instantaneous CH4 yield 1.89 times higher than that of raw char at 750 °C. The formation of the CxNi structure lowered the activation barrier for the ring opening reaction. Possible transformation pathways of Ni species were as follows: Ni(NO3)2·6H2O → NiO → Ni. KNi changed the reaction pathways and the most energy-consuming step. The study could shed light on the hydrogasification reaction mechanism.

The Guidelines for the Design and Synthesis of Transition Metal Atom Doped Carbon Dots

Atoms doping is a practical approach to modulate the physicochemical properties of carbon dots (CDs) and thus has garnered increasing attention in recent years. Compared to non-metal atoms, transition metal atoms (TMAs) possess more unoccupied orbitals and larger atomic radii. TMAs doping can significantly alter the electronic structure of CDs and bestow them with new intrinsic characteristics. TMAs-doped CDs have exhibited widespread application potential as a new class of single-atom-based nanomaterials. However, challenges remain for the successful preparation and precise design of TMAs-doped CDs. The key to successfully preparing TMA-doped CDs lies in anchoring TMAs to the carbon precursors before the reaction. Herein, taking the formation mechanism of TMAs-doped CDs as a starting point, we systematically summarized the ligands employed for synthesizing TMAs-doped CDs and proposed the synthetic strategy involving multiple ligands. Additionally, we summarize the functional properties imparted to CDs by different TMA dopants to guide the design of TMA-doped CDs with different functional characteristics. Finally, we describe the bottlenecks TMAs-doped CDs face and provide an outlook on their future development.

Revolutionizing Airborne Virus Defense: Electromagnetic MXene-Coated Air Filtration for Superior Aerosol Viral Removal

The COVID-19 pandemic sparked public health concerns about the transmission of airborne viruses. Current methods mainly capture pathogens without inactivation, leading to potential secondary pollution. Herein, we evaluated the inactivation performance of a model viral species (MS2) in simulated bioaerosol by an electromagnetically enhanced air filtration system under a 300 kHz electromagnetic induction field. A nonwoven fabric filter was coated with a 2D catalyst, MXene (Ti3C2Tx), at a coating density of 4.56 mg·cm-2 to absorb electromagnetic irradiation and produce local heating and electromagnetic field for microbial inactivation. The results showed that the MXene-coated air filter significantly enhanced the viral removal efficiency by achieving a log removal of 3.4 ± 0.15 under an electromagnetic power density of 369 W·cm-2. By contrast, the pristine filter without catalyst coating only garnered a log removal of 0.3 ± 0.04. Though the primary antimicrobial mechanism is the local heating as indicated by the elevated surface temperature of 72.2 ± 4 °C under the electromagnetic field, additional nonthermal effects (e.g., dielectrophoresis) on enhanced viral capture during electromagnetically enhanced filtration were investigated by COMSOL simulation to delineate the potential transmission trajectories of bioaerosol. The results provide unique insights into the mechanisms of pathogen control and thus promote alternative solutions for preventing the transmission of airborne pathogens.

Multifunctional Sensors Made with Conductive Microframework and Biomass Hydrogel for Detecting Packaging Pressure and Food Freshness

Food packaging detection devices have attracted attention to optimize storage situations and reduce food spoilage. However, low-cost and highly sensitive multifunctional sensors for detecting both food freshness and packaging pressure are still lacking. In this study, a multifunctional sensor was developed consisting of a MXene coated alcohol-soluble polyurethane fiber network (MXene/APU) and composite biohydrogel films made of konjac glucomannan, chitosan, and blueberry anthocyanin (KCB). Based on the pressure sensitivity of MXene/APU and the color changes of KCB in response to pH values, the sensor can detect internal package bulging, external squeezing, and food deterioration. The pressure sensor shows a sensitivity of 1.16 kPa-1, a response time of 200 ms, a wide strain range of 1092%, and stability over multiple loops. The pressure sensor could detect human motion and identify surface morphologies. The excellent sensor performance was attributed to the porous structure and large specific surface area of microfiber networks, conductivity of MXene nanosheets, and protective effect of KCB films coated on the conductive membrane. Besides, the microfluidic blow-spinning method used to prepare microfiber networks showed the advantages of low energy consumption and high production efficiency. Based on the color changes of blueberry anthocyanin loaded in KCB films in response to pH, the sensor realized sensitive spoilage detection of food containing protein. This study provides a new multifunctional food packaging sensing device and a greater understanding of the optimization and application of related devices.

CeO2 and Glucose Oxidase Co-Enriched Ti3C2Tx MXene for Hyperthermia-Augmented Nanocatalytic Cancer Therapy

Foreseen as foundational in forthcoming oncology interventions are multimodal therapeutic systems. Nevertheless, the tumor microenvironment (TME), marked by heightened glucose levels, hypoxia, and scant concentrations of endogenous hydrogen peroxide could potentially impair their effectiveness. In this research, two-dimensional (2D) Ti3C2 MXene nanosheets are engineered with CeO2 nanozymes and glucose oxidase (GOD), optimizing them for TME, specifically targeting cancer therapy. Following our therapeutic design, CeO2 nanozymes, embodying both peroxidase-like and catalase-like characteristics, enable transformation of H2O2 into hydroxyl radicals for catalytic therapy while also producing oxygen to mitigate hypoxia. Concurrently, GOD metabolizes glucose, thereby augmenting H2O2 levels and disrupting the intracellular energy supply. When subjected to a near-infrared laser, 2D Ti3C2 MXene accomplishes photothermal therapy (PTT) and photodynamic therapy (PDT), additionally amplifying cascade catalytic treatment via thermal enhancement. Empirical evidence demonstrates robust tumor suppression both in vitro and in vivo by the CeO2/Ti3C2-PEG-GOD nanocomposite. Consequently, this integrated approach, which combines PTT/PDT and enzymatic catalysis, could offer a valuable blueprint for the development of advanced oncology therapies.

Superassembled MXene-carboxymethyl chitosan nanochannels for the highly sensitive recognition and detection of copper ions

Copper ions (Cu2+), as a crucial trace element, play a vital role in living organisms. Thus, the detection of Cu2+ is of great significance for disease prevention and diagnosis. Nanochannel devices with an excellent nanoconfinement effect show great potential in recognizing and detecting Cu2+ ions. However, these devices often require complicated modification and treatment, which not only damages the membrane structure, but also induces nonspecific, low-sensitivity and non-repeatable detection. Herein, a 2D MXene-carboxymethyl chitosan (MXene/CMC) freestanding membrane with ordered lamellar channels was developed by a super-assembly strategy. The introduction of CMC provides abundant space charges, improving the nanoconfinement effect of the nanochannel. Importantly, the CMC can chelate with Cu2+ ions, endowing the MXene/CMC with the ability to detect Cu2+. The formation of CMC-Cu2+ complexes decreases the space charges, leading to a discernible variation in the current signal. Therefore, MXene/CMC can achieve highly sensitive and stable Cu2+ detection based on the characteristics of nanochannel composition. The linear response range for Cu2+ detection is 10-9 to 10-5 M with a low detection limit of 0.095 nM. Notably, MXene/CMC was successfully applied for Cu2+ detection in real water and fetal bovine serum samples. This work provides a simple, highly sensitive and stable detection platform based on the properties of the nanochannel composition.

Coupling Photoresponsive Transmembrane Ion Transport with Transition Metal Catalysis

Artificial ion transporters have been explored both as tools for studying fundamental ion transport processes and as potential therapeutics for cancer and channelopathies. Here we demonstrate that synthetic transporters may also be used to regulate the transport of catalytic metal ions across lipid membranes and thus control chemical reactivity inside lipid-bound compartments. We show that acyclic lipophilic pyridyltriazoles enable Pd(II) cations to be transported from the external aqueous phase across the lipid bilayer and into the interior of large unilamellar vesicles. In situ reduction generates Pd(0) species, which catalyze the generation of a fluorescent product. Photocaging the Pd(II) transporter allows for photoactivation of the transport process and hence photocontrol over the internal catalysis process. This work demonstrates that artificial transporters enable control over catalysis inside artificial cell-like systems, which could form the basis of biocompatible nanoreactors for applications such as drug synthesis and delivery or to mediate phototargeted catalyst delivery into cells.

Study on 3D printed MXene-berberine-integrated scaffold for photo-activated antibacterial activity and bone regeneration

The repair of mandibular defects is a challenging clinical problem, and associated infections often hinder the treatment, leading to failure in bone regeneration. Herein, a multifunctional platform is designed against the shortages of existing therapies for infected bone deficiency. 2D Ti3C2 MXene and berberine (BBR) are effectively loaded into 3D printing biphasic calcium phosphate (BCP) scaffolds. The prepared composite scaffolds take the feature of the excellent photothermal capacity of Ti3C2 as an antibacterial, mediating NIR-responsive BBR release under laser stimuli. Meanwhile, the sustained release of BBR enhances its antibacterial effect and further accelerates the bone healing process. Importantly, the integration of Ti3C2 improves the mechanical properties of the 3D scaffolds, which are beneficial for new bone formation. Their remarkable biomedical performances in vitro and in vivo present the outstanding antibacterial and osteogenic properties of the Ti3C2-BBR functionalized BCP scaffolds. The synergistic therapy makes it highly promising for repairing infected bone defects and provides insights into a wide range of applications of 2D nanosheets in biomedicine.

Cellular uptake and cytotoxicity of PEGylated MXene nanomaterials mediated by protein corona

A stringent analysis of the biocompatibility of MXene is a necessary condition for assessing the biological risk of MXene. Owing to high surface free energy, MXene is capable of adsorbing a large amount of blood proteins to form MXene-protein corona complexes, however, a comprehensive understanding of the relationship between MXene and cellular physiological systems remains limited. Therefore, we investigated the cellular uptake and cytotoxicity effect of MXene Ti3C2Tx and PEGylation Ti3C2Tx mediated by human serum protein corona in THP-1 cells. It was found that PEGylation can alter the interaction between Ti3C2Tx and serum proteins, inducing a significant transformation in the fingerprint of the protein corona. Following protein corona formation, both Ti3C2Tx and PEGylated Ti3C2Tx predominantly accumulated at lysosomal sites within THP-1 cells. Further analysis revealed that clathrin-mediated endocytosis was the primary mechanism of Ti3C2Tx internalization by THP-1 cells. There was no significant effect on cell viability. However, we found that Ti3C2Tx plays a dual role as both a stimulus and scavenger of ROS within THP-1 cells, influenced by its PEGylation and the formation of a protein corona. This study provides important insights for biocompatibility evaluation and rational design of nanoproducts based on Ti3C2Tx in the future.

Recent advances using MXenes in biomedical applications

An MXene is a novel two-dimensional transition metal carbide or nitride, with a typical formula of Mn+1XnTx (M = transition metals, X = carbon or nitrogen, and T = functional groups). MXenes have found wide application in biomedicine and biosensing, owing to their high biocompatibility, abundant reactive surface groups, good conductivity, and photothermal properties. Applications include photo- and electrochemical sensors, energy storage, and electronics. This review will highlight recent applications of MXene and MXene-derived materials in drug delivery, tissue engineering, antimicrobial activity, and biosensors (optical and electrochemical). We further elaborate on recent developments in utilizing MXenes for photothermal cancer therapy, and we explore multimodal treatments, including the integration of chemotherapeutic agents or magnetic nanoparticles for enhanced therapeutic efficacy. The high surface area and reactivity of MXenes provide an interface to respond to the changes in the environment, allowing MXene-based drug carriers to respond to changes in pH, reactive oxygen species (ROS), and electrical signals for controlled release applications. Furthermore, the conductivity of MXene enables it to provide electrical stimulation for cultured cells and endows it with photocatalytic capabilities that can be used in antibiotic applications. Wearable and in situ sensors incorporating MXenes are also included. Major challenges and future development directions of MXenes in biomedical applications are also discussed. The remarkable properties of MXenes will undoubtedly lead to their increasing use in the applications discussed here, as well as many others.

Ti3C2/Ni/Sm-based electrochemical glucose sensor for sweat analysis using bipolar electrochemistry

An innovative electrochemical sensor is introduced that utilizes bipolar electrochemistry on a paper substrate for detecting glucose in sweat. The sensor employs a three-dimensional porous nanocomposite (MXene/NiSm-LDH) formed by decorating nickel-samarium nanoparticles with double-layer MXene hydroxide. These specially designed electrodes exhibit exceptional electrocatalytic activity during glucose oxidation. The glucose sensing mechanism involves enzyme-free oxidation of the analyte within the sensor cell, achieved by applying an appropriate potential. This leads to the reduction of K3Fe(CN)6 in the reporter cell, and the resulting current serves as the response signal. By optimizing various parameters, the measurement platform enables the accurate determination of sweat glucose concentrations within a linear range of 10 to 200 µM. The limit of detection (LOD) for glucose is 3.6 µM (S/N = 3), indicating a sensitive and reliable detection capability. Real samples were analysed  to validate the sensor's efficiency, and the results obtained were both promising and encouraging.