A comprehensive insight on plasma-catalytic degradation of organic pollutants in water: Comparison between ZnO and TiO2

A novel system combining underwater plasma bubbles and high voltage nanopulses was combined for the first time with ZnO and TiO2 for the degradation of organic pollutants in water. The effect of catalyst loading, discharge power and plasma gas on pollutant degradation was investigated whereas the plasma-catalytic mechanism was explored through the quantification of plasma species, COD/TOC measurements and scavenging experiments in the presence and absence of catalysts. The increased efficiency in the presence of either ZnO or TiO2, especially under plasma gases (air and oxygen) able to produce UV radiation in the range of wavelengths absorbed by both catalysts, lies on the increased concentration of the critical reactive species (e.g. ·O2-, ·ΟΗ, H2O2). Compared to plasma alone process, H2O2 was significantly enhanced in the presence of TiO2 and decreased in the presence of ZnO, whereas ·OH concentration was higher in the plasma-ZnO but lower in the plasma-TiO2 system which supports the overall superior performance of ZnO compared to TiO2. The synergy of plasma-ZnO process compared to that of plasma-TiO2 was ∼2.4 and ∼1.5 times higher for Orange II (OII) and Methylene Blue (MB), respectively, exhibiting a very low electrical energy per order (1.4 kWh m-3 for OII and 0.31 kWh m-3 or MB). The present effort contributes on providing fundamental insights and further expand of plasma-catalysis for water treatment.

Smartphone-based wearable microfluidic electrochemical sensor for on-site monitoring of copper ions in sweat without external driving

The directional movement of liquid without exogenous drive can show great potential in portable electrochemical platforms. Herein, we developed a portable electrochemical platform that drove electrolyte flow by surface tension gradient, which can realize collection of electrolyte, flow preconcentration and electrochemical detection of Cu2+. The induced graphene electrodes (LIG) was fabricated using laser direct writing, and flower cluster shaped ZnO nanorods (FC-ZnONRs) were prepared and modified on LIG, which provided a large amount of space for electrolyte to shuttled between the holes of LIG and ZnO, and increased the electrochemical active sites and electrons transport ability. The effect of surface tension gradients driving fluid flow could accelerate preconcentration, shorten detection time (save 300 s of preconcentration time) and enhance electrochemical responses in synergy with the 3D FC-ZnONRs/LIG. The microfluidic system possessed excellent performance for detection of Cu2+ ranged from 1 μg L-1 to 2100 μg L-1 with a low detection limit (LOD) of 0.0368 μg L-1 and high sensitivity of 0.414 μA (μg L-1)-1 cm-2. Additionally, this portable microfluidic system was successfully worn on the skin for analysing Cu2+ in human sweat, and the results showed good consistency with inductively coupled plasma-mass spectrometry (ICP-MS). This novel sensing system provides a sample collection, rapid detection, low cost and easy-to-operate strategy for heavy metal ions analysis in real samples and shows huge application prospects in point-of-care testing.

Double-function ZnO/starch biodegradable hydrogel composite for methylene blue adsorption and photocatalytic degradation

An eco-friendly material for the removal of dyes from wastewater was developed. Biodegradable polymers (BP), cassava starch and poly(vinyl alcohol), were used to replace polyacrylamide. The hydrogel containing 50 wt% of BP (BP50) could absorb 34 times its dry weight of water. The hydrogel could adsorb Zn2+ and ZnO photocatalyst particles could be formed via a simple precipitation method. The incorporation of ZnO did not affect the adsorption efficiency of the ZnO/BP50 hydrogel composite towards methylene blue (MB). At initial concentrations (Co) below 4500 mg/g, the hydrogel composite removed ∼99 % of MB from solution in 3 h. The highest adsorption capacity of 1170 mg/g was obtained when Co was 6000 mg/g and at a dose of 0.10 g/20 mL. The hydrogel composite degraded 95 %-98 % of adsorbed MB at rates of 0.19 h-1 and 1.77 h-1 under UV irradiation and sunlight, respectively, with exposure times of 16 h for UV but only 2 h for sunlight. The material remained effective for at least 10 cycles of photodegradation under sunlight and removed 86 % of MB in solution on the 10th cycle. The composite also showed antibacterial activities and biodegradability in soil. These results indicated this material would not generate after-process toxic waste.

Application of ZnO Nanoparticles Encapsulated in Mesoporous Silica on the Abaxial Side of a Solanum lycopersicum Leaf Enhances Zn Uptake and Translocation via the Phloem

Foliar application of nutrient nanoparticles (NPs) is a promising strategy for improving fertilization efficiency in agriculture. Phloem translocation of NPs from leaves is required for efficient fertilization but is currently considered to be feasible only for NPs smaller than a cell wall pore size exclusion limit of <20 nm. Using mass spectrometry imaging, we provide here the first direct evidence for phloem localization and translocation of a larger (∼70 nm) fertilizer NP comprised of ZnO encapsulated in mesoporous SiO2 (ZnO@MSN) following foliar deposition. The Si content in the phloem tissue of the petiole connected to the dosed leaf was ∼10 times higher than in the xylem tissue, and ∼100 times higher than the phloem tissue of an untreated tomato plant petiole. Direct evidence of NPs in individual phloem cells has only previously been shown for smaller NPs introduced invasively in the plant. Furthermore, we show that uptake and translocation of the NPs can be enhanced by their application on the abaxial (lower) side of the leaf. Applying ZnO@MSN to the abaxial side of a single leaf resulted in a 56% higher uptake of Zn as well as higher translocation to the younger (upper) leaves and to the roots, than dosing the adaxial (top) side of a leaf. The higher abaxial uptake of NPs is in alignment with the higher stomatal density and lower density of mesophyll tissues on that side and has not been demonstrated before.

Evaluation of antimicrobial and antioxidant activity of zinc oxide nanoparticles biosynthesized with Ziziphus spina-christi leaf extracts

Background: Due to their simplicity, eco-friendliness, availability and non-toxicity, the greener fabrication of metal and metal oxide nanoparticles has been a highly attractive research area over the last decade. Aim: This study aimed to assess the antioxidant and antimicrobial activities of the green synthesized zinc oxide nanoparticles (ZnO-NPs) using an aqueous leaf extract of Ziziphus spina-christi. Method: The antioxidant property of ZnO-NPs was analyzed by the α, α-diphenyl-β-picrylhydrazyl (DPPH) and hydrogen peroxide (H2O2). Additionally, the diffusion agar method assessed the antimicrobial activities against bacteria and fungi. Results: ZnO-NPs synthesized by Z. spina-christi had shown promising H2O2 and DPPH free radical scavenging actions compared to vitamin C. The ZnO-NPs exhibited significant antibacterial activity against the tested bacteria with various susceptibility as a concentration-dependent effect. The largest zone of inhibition for Staphylococcus aureus (S. aureus) was observed (36 ± 2 mm) compared to Escherichia coli (E. coli) (15 ± 2 mm) by the same concentration of ZnO-NPs. The ZnO-NPs showed remarkable antifungal activity against Aspergillus niger. Conclusion: It can be concluded that, ZnO-NP have been imposed as suitable antimicrobial agent being able to combat both S. aureus and E. coli in vitro.

Wearable fabric-based ZnO nanogenerator for biomechanical and biothermal monitoring

Wearable devices that can mechanically conform to human skin are a necessity for reliable monitoring and decoding of biomechanical activities through skin. Most inorganic piezoelectrics, however, lack deformability and damage tolerance, impeding stable motion monitoring. Here, we present an air-permeable fabric-based ZnO nanogenerator with mechanical adaptivity to diverse deformations for wearable piezoelectric sensors, collecting biomechanical health data. We fabricate ZnO nanorods incorporated throughout the entire nylon fabric, with a strategically positioned neutral mechanical plane, for bending-sensitive electronics (2.59 μA mm). Its hierarchically interlocked geometry also permits sensitive tactile sensing (0.15 nA kPa-1). Various physiological information about activities, including pulse beating, breathing, saliva swallowing, and coughing, is attained using skin-mounted sensors. Further, the pyroelectric sensing capability of a mask-attached device is demonstrated by identifying specific respiratory patterns. Our wearable healthcare sensors hold great promise for real-time monitoring of health-related vital signs, informing individuals' health status without disrupting their daily lives.

Reconstituted dry powder formulations of ZnO-adjuvanted ovalbumin induce equivalent antigen specific antibodies but lower T cell responses than ovalbumin adjuvanted with Alhydrogel® or cationic adjuvant formulation 01 (CAF®01)

Most licensed human vaccines are based on liquid dosage forms but have poor storage stability and require continuous and expensive cold-chain storage. In contrast, the use of solid vaccine dosage forms produced by for example spray drying, extends shelf life and eliminates the need for a cold chain. Zinc oxide (ZnO)-based nanoparticles display immunomodulatory properties, but their adjuvant effect as a dry powder formulation is unknown. Here, we show that reconstituted dry powder formulations of ZnO particles containing the model antigen ovalbumin (OVA) induce antigen-specific CD8+ T-cell and humoral responses. By systematically varying the ratio between ZnO and mannitol during spray drying, we manufactured dry powder formulations of OVA-containing ZnO particles that displayed: (i) a spherical or wrinkled surface morphology, (ii) an aerodynamic diameter and particle size distribution optimal for deep lung deposition, and (iii) aerosolization properties suitable for lung delivery. Reconstituted dry powder formulations of ZnO particles were well-tolerated by Calu-3 lung epithelial cells. Furthermore, almost equivalent OVA-specific serum antibody responses were stimulated by reconstituted ZnO particles, OVA adjuvanted with Alhydrogel®, and OVA adjuvanted with the cationic adjuvant formulation 01 (CAF®01). However, reconstituted dry powder ZnO particles and OVA adjuvanted with Alhydrogel® induced significantly lower OVA-specific CD8+CD44+ T-cell responses in the spleen than OVA adjuvanted with CAF®01. Similarly, reconstituted dry powder ZnO particles activated significantly lower percentages of follicular helper T cells and germinal center B cells in the draining lymph nodes than OVA adjuvanted with CAF®01. Overall, our results show that reconstituted dry powder formulations of ZnO nanoparticles can induce antigen-specific antibodies and can be used in vaccines to enhance antigen-specific humoral immune responses against subunit protein antigens.

Design and fabrication of Zn@ZnO@Ag chip for Raman scattering analysis of norfloxacin in liquid milk, fish and animal feeds

A novel and easy-to-prepare plasmonic nanoparticles doped semiconductor substrate-Zn@ZnO@Ag chip with ultra-high surface-enhanced Raman scattering (SERS) activity was fabricated for label-free, rapid and sensitive analysis of norfloxacin. The Zn@ZnO array was synthesized by surface oxidation at low temperature, followed by in-situ reduction to form leaf-like AgNPs on Zn@ZnO array without extra reducing agent, thus fabricating a Zn@ZnO@Ag chip. The ultra-high SERS activity is attributed to the synergistic effect of semiconductor characteristics of ZnO and surface plasmon resonance properties of leaf-like AgNPs. The possible enhancement mechanism was verified by density functional theory simulations. The proposed SERS method showed a wide linear range (3.0-500.0 μg/L) and low limit of detection (0.8 μg/L) for norfloxacin analysis. High sensitivity, good selectivity and acceptable recoveries (82.7-113.6%) in real sample analysis were obtained. This study offers a promising SERS chip-based platform for norfloxacin detection in the field.

Application of lipid and polymeric-based nanoparticles for treatment of inner ear infections via XGBoost

Taking hearing loss as a prevalent sensory disorder, the restricted permeability of blood flow and the blood-labyrinth barrier in the inner ear pose significant challenges to transporting drugs to the inner ear tissues. The current options for hear loss consist of cochlear surgery, medication, and hearing devices. There are some restrictions to the conventional drug delivery methods to treat inner ear illnesses, however, different smart nanoparticles, including inorganic-based nanoparticles, have been presented to regulate drug administration, enhance the targeting of particular cells, and decrease systemic adverse effects. Zinc oxide nanoparticles possess distinct characteristics that facilitate accurate drug delivery, improved targeting of specific cells, and minimized systemic adverse effects. Zinc oxide nanoparticles was studied for targeted delivery and controlled release of therapeutic drugs within specific cells. XGBoost model is used on the Wideband Absorbance Immittance (WAI) measuring test after cochlear surgery. There were 90 middle ear effusion samples (ages = 1-10 years, mean = 34.9 months) had chronic middle ear effusion for four months and verified effusion for seven weeks. In this research, 400 sets underwent wideband absorbance imaging (WAI) to assess inner ear performance after surgery. Among them, 60 patients had effusion Otitis Media with Effusion (OME), while 30 ones had normal ears (control). OME ears showed significantly lower absorbance at 250, 500, and 1000 Hz than controls (p < 0.001). Absorbance thresholds >0.252 (1000 Hz) and >0.330 (2000 Hz) predicted a favorable prognosis (p < 0.05, odds ratio: 6). It means that cochlear surgery and WAI showed high function in diagnosis and treatment of inner ear infections. Regarding the R2 0.899 and RMSE 1.223, XGBoost shows excellent specificity and sensitivity for categorizing ears as having effusions absent or present or partial or complete flows present, with areas under the curve (1-0.944).

Visualization of the Dynamics of Photoinduced Crawling Motion of 4-(Methylamino)Azobenzene Crystals via Diffracted X-ray Tracking

The photoinduced crawling motion of crystals is a continuous motion that azobenzene molecular crystals exhibit under light irradiation. Such motion enables object manipulation at the microscale with a simple setup of fixed LED light sources. Transportation of nano-/micromaterials using photoinduced crawling motion has recently been reported. However, the details of the motion mechanism have not been revealed so far. Herein, we report visualization of the dynamics of fine particles in 4-(methylamino)azobenzene (4-MAAB) crystals under light irradiation via diffracted X-ray tracking (DXT). Continuously repeated melting and recrystallization of 4-MAAB crystals under light irradiation results in the flow of liquid 4-MAAB. Zinc oxide (ZnO) particles were introduced inside the 4-MAAB crystals to detect diffracted X-rays. The ZnO particles rotate with the flow of liquid 4-MAAB. By using white X-rays with a wide energy width, the rotation of each zinc oxide nanoparticle was detected as the movement of a bright spot in the X-ray diffraction pattern. It was clearly shown that the ZnO particles rotated increasingly as the irradiation light intensity increased. Furthermore, we also found anisotropy in the rotational direction of ZnO particles that occurred during the crawling motion of 4-MAAB crystals. It has become clear that the flow perpendicular to the supporting film of 4-MAAB crystals is enhanced inside the crystal during the crawling motion. DXT provides a unique means to elucidate the mechanism of photoinduced crawling motion of crystals.

Effects of electron transport layer type on the performance of Pb-free Cs2AgBiBr6 double perovskites: a SCAPS-1D solar simulator-based study

Recently, due to the superior stability and lower risk of toxicity, the development of Pb-free halide double perovskite materials has revived excellent interest. In this work, Pb-free perovskite solar cells (PSCs) with ITO/ETL/Cs2AgBiBr6/Cu2O/Au multilayer structures with Cs2AgBiBr6 double perovskite as the solar light absorber layer, some electron transport layers (ETLs) and Cu2O as a hole transport layer have been introduced. Then, the effects of various thicknesses of the absorber layer and also ETL materials, like ZnO, C60, CdS, SnO2, phenyl-C61-butyric acid methyl ester (PCBM), and TiO2, on the device performance (including photoelectronic conversion efficiency (PCE), fill factor (FF%), short circuit current density (Jsc), and open-circuit voltage (VOC)) were examined with the help of a solar cell simulator (SCAPS-1D). It is noteworthy that, in the case of all ETL materials, the optimal thickness of the absorber layer was determined to be 400 nm. Then, the maximum PCE values of 20.08%, 17.63%, 14.07%, 12.11%, 14.94%, and 18.83% were obtained for the solar cells containing ZnO, C60, CdS, SnO2, PCBM, and TiO2 as the ETL, respectively. These results show that designing/developing Pb-free halide double perovskite devices having comparable PCEs with the Pb-based PSCs is feasible, provided that proper/compatible materials will be used in the multilayer structure of the next generations of solar cells.

ZnO/black phosphorus/C3N4 composite: An effective photocatalyst for Cr (VI) reduction and degradation of rhodamine B

The utilization of photocatalysts offers a promising approach for the removal of Cr (VI) and rhodamine dyes. Through the generation of reactive species and subsequent degradation reactions, photocatalysis provides an efficient and environmentally friendly method for the remediation of wastewater. In this study, we have synthesized an n-p-n heterojunction of carbon nitride (C3N4), zinc oxide (ZnO), and black phosphorus (BP) through the sonication-stirring method. The photocatalytic ability of this composite was examined for the decomposition rhodamine B (RhB) and detoxification of hexavalent chromium ion (up to 97% during 80 min) under Xenon irradiation. The results of trapper experiments indicated that the active species were hydroxyl radical (˙OH), electron (e-), and superoxide anion radical (˙O2-). Based on the obtained potential of the lowest unoccupied molecular orbitals (LUMO) and the highest occupied molecular orbital (HOMO) for the mentioned semiconductors, through Mutt-Schottky results, the double Z-scheme mechanism was proposed for the studied process. The electrochemical impedance spectroscopy data exhibited good charge transfer for the evaluated composite versus the pure compounds. The impressive separation of holes and electrons along with the low recombination were confirmed by the responses of photocurrent and quenching the photoluminescence (pl) intensity for the composite, respectively. The current density of the composite recorded 66.6%, 87.3%, and 92% higher than those of BP, C3N4, and ZnO, indicating an excellent electron-hole separation for the ternary composite compared to the pure semiconductors. Diffuse reflectance spectra (DRS) data revealed 2.9, 3.17, 1.15, and 2.63 eV as the band gap values for C3N4, ZnO, BP, and composite. The rate constant of the new composite to remove RhB and reduce hexavalent chromium were about 4.79 and 2.64 times higher than that of C3N4, respectively.

Improved Persistence of Bacteriophage Formulation with Nano N-Acetylcysteine-Zinc Sulfide and Tomato Bacterial Spot Disease Control

Bacteriophages are biocontrol agents used to manage bacterial diseases. They have long been used against plant pathogenic bacteria; however, several factors impede their use as a reliable disease management strategy. Short-lived persistence on plant surfaces under field conditions results mainly from rapid degradation by exposure to ultraviolet (UV) light. Currently, there are no effective commercial formulations that protect phages from UV. The phage ΦXp06-02-1, which lyses strains of the tomato bacterial spot pathogen Xanthomonas perforans, was mixed with different concentrations of the nanomaterial N-acetylcysteine surface-coated manganese-doped zinc sulfide (NAC-ZnS; 3.5 nm). In vitro, NAC-ZnS at 10,000 μg/ml formulated phage, when exposed to UV for 1 min, provided statistically equivalent plaque-forming unit (PFU) recovery as phages that were not exposed to UV. NAC-ZnS had no negative effect on the phage's ability to lyse bacterial cells under in vitro conditions. NAC-ZnS reduced phage degradation over time in comparison with the nontreated control, whereas N-acetylcysteine-zinc oxide (NAC-ZnO) had no effect. In fluorescent light, without UV exposure, NAC-ZnO-formulated phages were more infective than NAC-ZnS-formulated phages. The nanomaterial-phage mixture did not cause any phytotoxicity when applied to tomato plants. Following exposure to sunlight, the NAC-ZnS formulation improved phage persistence in the phyllosphere by 15 times compared with nonformulated phages. NAC-ZnO-formulated phage populations were undetectable within 32 h, whereas NAC-ZnS-formulated phage populations were detected at 103 PFU/g. At 4 h of sunlight exposure, NAC-ZnS-formulated phages at 1,000 μg/ml significantly reduced tomato bacterial spot disease severity by 16.4% compared with nonformulated phages. These results suggest that NAC-ZnS can be used to improve the efficacy of phages for bacterial diseases.

In vitro establishment of cell suspension culture of Ceropegia bulbosa for improved production of cerpegin content through elicitation of engineered carbon and ZnO nanoparticles

 The present investigations aimed to conserve C. bulbosa a threatened plant species and for production of cerpegin through cell culture technology using ENP elicitation. Leaf explants were aseptically cultured with normal MS medium-supplemented PGRs BA and NAA various concentrations, and the best callus induction response was recorded on 4.5 + 4.5 μM. The prospective special effects of the ENPs on plant cell cultures are the key part of our study and used to evaluate leaf callus culture proliferation with the reduction of browning, establishment, biomass, and metabolite formation. The CNP concentrations (0, 2, 4, 8, 12 mg/l) are used for the callus proliferation and browning reduction. The cell suspension cultures are also established, and they were elicited with EZnONPs (0, 25, 50, 100, 150 mg/l) for evaluation of biomass, antioxidant, non-antioxidant enzyme activation, toxicity, ROS defense activation, and metabolite development in cell cultures. The metabolite extraction, UV, and NMR characterization confirm that the toxic and nontoxic effect of ENPs on leaf cell cultures varies with high to low concentration.

Sustainable remediation of toxic congo red dye pollution using bio based carbon nanocomposite: Modelling and performance evaluation

Remediation of synthetic dyes found in aqueous environment poses a serious challenge for treatment due to their resistance to chemical and biological degradation. This research study investigated the application of Chitosan-ZnO-Seaweed bio nanocomposite in the remediation of congo red. The novel bionanocomposite was characterised by FTIR, SEM, TEM, EDS and XRD studies. The FTIR spectra and SEM images indicated the adsorption of congo red onto the synthesized bionanocomposite. The batch wise experimental studies were done to explore the influence of process variables on removal of congo red from synthetic wastewater and to determine optimized conditions. Under optimized conditions of pH 3, temperature 40 °C, initial congo red concentration 50 mg/L, bionanocomposite quantity 0.03 g/L and interaction period 30 min, the bionanocomposite removed 95.64% of congo red. Thermodynamic studies were carried out and the parameters, ΔH° and ΔS° were found to be 38.386 kJ/mol and 0.1451 kJ/mol. K, respectively. The isotherm and kinetic study showed that monolayer Langmuir model was obeyed (R2 = 0.968) and the experimental value of congo red adsorption correlated well with pseudo second order model (R2 = 0.9938) respectively. The maximum adsorption capacity was found to be 303.03 mg/g. Protonated amino group of chitosan, hydroxyl group of seaweed accounts for congo red adsorption along with zinc oxide.

Simple synthesis of BiOI/ZnO/rGO for efficient photocatalytic degradation of antibiotic chloramphenicol under visible light

BiOI/ZnO/rGO (reduced graphene oxide) composite photocatalyst was fabricated using a simple one-step hydrothermal process and applied to the degradation of antibiotic chloramphenicol (CAP). By tuning the Bi/Zn ratios, the structure and photoelectric properties of the catalyst were investigated and characterized in terms of their morphological, structural, optical and photoelectrochemical properties. The as-synthesized composite photocatalysts are well-crystalline, uniform dispersion and exhibit good photocatalytic properties. The photocatalytic degradation rate of CAP by BiOI/ZnO/rGO composite is 8.1 times and 1.8 times that of BiOI and ZnO, respectively. The photocatalytic mechanism studies revealed that the synergistic effect between rGO and BiOI/ZnO can effectively separate photogenerated electron-hole, enhance photocurrents and conductivity, and improve charge carrier densities. Moreover, BiOI/ZnO/rGO possesses good stability and reusability that the degradation efficiency remained above 80% even after 5 recycling. This study reveals that both the introduction of rGO and heterostructure construction between BiOI and ZnO play a crucial role in their photoelectrochemical and photocatalytic properties.

Enhancing floc size and strength with a hybrid polymer of zinc oxide, acrylamide, and tannin in textile wastewater

This study involved synthesising new hybrid polymers called ZOPAT, made up of zinc oxide, acrylamide, and tannin, using a blended technique. The effectiveness of ZOPAT in treating textile wastewater was then tested by measuring floc growth rate, flocculation index, strength factor, and recovery factor under optimised conditions. The study also identified the zeta potential, morphology, elemental composition, and functional groups of the polymers. Response surface methodology determines the optimal pH and ZOPAT dose, resulting in 93% colour, 80% chemical oxygen demand (COD), 100% turbidity, and suspended solids (SS) removal at pH 9.22 and 737 mg/L ZOPAT. The study found that ZOPAT was more effective than commercial Polyaluminium chloride in reducing colour and COD, producing larger and stronger flocs, and requiring a shorter coagulation time of 17.5 min. ZOPAT was also easy to homogenise and operate due to its one-unit dosing system. The study attributes the success of ZOPAT to the presence of Zn, N, and K, which create electrostatic attraction with opposite charged particles, and the formation of dye-particle-dye with amide, hydroxyl, and carboxyl groups in ZOPAT, which remove colour, turbidity, COD, and SS. Overall, the study concludes that ZOPAT has significant potential for textile wastewater treatment.

Three-dimensional rose-like zinc oxide fiber coating for simultaneous extraction of polychlorinated biphenyls and polycyclic aromatic hydrocarbons by headspace solid phase microextraction

The three-dimensional (3D) rose-like zinc oxide (ZnO) material was prepared by a simple one-step CTAB-assisted hydrothermal strategy and used as a headspace solid-phase microextraction (HS-SPME) coating. Polychlorinated biphenyls (PCBs) and polycyclic aromatic hydrocarbons (PAHs) were analyzed by gas chromatography with flame ionization detector (GC-FID), and conclusively applied to ultrasensitive detection in lake and river water. Compared with one-dimensional (1D) pencil-like ZnO, the layer-by-layer petal-like structure could fully expose mass adsorption sites on the surface, which could significantly improve the adsorption. The enrichment factors with 7535-8595 for PCBs and 3855-7320 for PAHs were achieved. The established method provided a satisfactory linear range (0.005-30 ng·mL-1), coefficient (R2 > 0.9978), ultra-low limit detection (1-3 pg·mL-1), and long service life (≥ 150 times). The recoveries of 83.42-120.86 % were obtained in the real detection application of lake and river water. This work demonstrated that 3D rose-like ZnO with low cost, simple synthesis, fast extraction ability and high enrichment performance was an ideal coating material, which was hoped to enrich other compounds with similar structures with PCBs and PAHs.

Oxygen Vacancies and Surface Wettability: Key Factors in Activating and Enhancing the Solar Photocatalytic Activity of ZnO Tetrapods

This paper reports on the high photocatalytic activity of ZnO tetrapods (ZnO-Ts) using visible/solar light and hydrodynamic water flow. It was shown that surface oxygen defects are a key factor in the photocatalytic activity of the ZnO-Ts. The ability to control the surface wettability of the ZnO-Ts and the associated concentration of surface defects was demonstrated. It was demonstrated that the photocatalytic activity during the MB decomposition process under direct and simulated sunlight is essentially identical. This presents excellent prospects for utilizing the material in solar photocatalysis.

Biostimulation of green microalgae Chlorella sorokiniana using nanoparticles of MgO, Ca10(PO4)6(OH)2, and ZnO for increasing biodiesel production

Microalgae have the potential to become the primary source of biodiesel, catering to a wide range of essential applications such as transportation. This would allow for a significant reduction in dependence on conventional petroleum diesel. This study investigates the effect of biostimulation techniques utilizing nanoparticles of Magnesium oxide MgO, Calcium hydroxyapatite Ca10(PO4)6(OH)2, and Zinc oxide ZnO to enhance the biodiesel production of Chlorella sorokiniana. By enhancing cell activity, these nanoparticles have demonstrated the ability to improve oil production and subsequently increase biodiesel production. Experimentally, each nanomaterial was introduced at a concentration of 15 mg L-1. The results have shown that MgO nanoparticles yielded the highest biodiesel production, with a recorded yield of 61.5 mg L-1. Hydroxyapatite nanoparticles, on the other hand, facilitated lipid accumulation. ZnO nanoparticles showcased a multifaceted advantage by enhancing both growth and lipid content. Thus, it is suggested that these nanoparticles can be used effectively to increase the lipid content of microalgae. These findings highlight the potential of biostimulation strategies utilizing MgO, hydroxyapatite, and zinc oxide nanoparticles to bolster biodiesel production.

An artificially-intelligent cornea with tactile sensation enables sensory expansion and interaction

We demonstrate an artificially-intelligent cornea that can assume the functions of the native human cornea such as protection, tactile perception, and light refraction, and possesses sensory expansion and interactive functions. These functions are realized by an artificial corneal reflex arc that is constructed to implement mechanical and light information coding, information processing, and the regulation of transmitted light. Digitally-aligned, long and continuous zinc tin oxide (ZTO) semiconductor fabric patterns were fabricated as the active channels of the artificial synapse, which are non-toxic, heavy-metal-free, low-cost, and ensure superior comprehensive optical properties (transmittance >99.89%, haze <0.36%). Precisely-tuned crystal-phase structures of the ZTO fibers enabled reconfigurable synaptic plasticity, which is applicable to encrypted communication and associative learning. This work suggests new strategies for the tuning of synaptic plasticity and the design of visual neuroprosthetics, and has important implications for the development of neuromorphic electronics and for visual restoration.

In situ fabrication of Ag decorated porous ZnO photocatalyst via inorganic-organic hybrid transformation for degradation of organic pollutant and bacterial inactivation

In this study, in situ silver (Ag) - porous ZnO photocatalysts were synthesized via solvothermal and post-annealing treatment. The formation of the porous ZnO structure due to the removal of organic moieties from the inorganic-organic hybrids Ag-ZnS(en)0.5 during the annealing process. The optimal Ag-ZnO photocatalyst showed excellent photocatalytic degradation activity, with 95.5% orange II dye and 97.2% bisphenol A (BPA) degradation under visible light conditions. Additionally, the photocatalytic inactivation of Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) led to a 97% inactivation rate after 2 h under dark conditions. Trapping experiments suggest that the superoxide anion (O2-) radicals are the main active species to degrade the organic dye. The improved photocatalytic dye degradation activity and inactivation of bacteria were attributed to the synergistic effect of Ag and porous ZnO structure, increased surface area, and efficiently separated the photoexcited charge carriers. This work could provide an effective strategy for the synthesis of porous structures toward organic pollutant degradation and bacterial inactivation in wastewater.

Green synthesis of zinc and nickel dual-doped cerium oxide nanoparticles: antioxidant activity and cytotoxicity effects

Cerium oxide nanoparticles (CeO2-NPs) and Zn-Ni dual-doped CeO2-NPs were synthesized through a green approach by the implication of zucchini peel (Cucurbita pepo) extract as a capping and reduction agent. All the synthesized samples were studied by the results of FTIR, UV-Vis, XRD, and FESEM/EDAX/PSA analyses. The Zn-Ni dual-doped CeO2-NPs contained a spherical morphology and their size was observed to increase at higher temperatures. The conducted MTT assay on the Huh-7 cell line displayed 50% of cells annihilation as a result of using undoped CeO2-NPs and Zn-Ni dual-doped CeO2-NPs at the inhibitory concentrations (IC50) of 700 and 185.4 μg/mL, respectively. We also evaluated the enzymatic functionality of SOD and CAT of undoped CeO2-NPs and dual-doped NPs and found it to be dose dependent. Moreover, Zn-Ni dual-doped CeO2-NPs intensified the CAT activity without causing any changes in SOD activity in similar concentrations.

Treatment of landfill leachate using photocatalytic based advanced oxidation process - a critical review

Landfill leachate is a discrete volumetric component of municipal solid waste; hence, researchers and professionals are more concerned about it because of its obscurity. Innovative treatment and emerging technologies are being scrutinized to address the treatment of landfill leachate challenges. The leading target of this review was to examine the possibility of removing recalcitrant organic pollutants from landfill leachate by photocatalytic-based advanced oxidation processes. A summary of the systematic applicability of conventional treatment for landfill leachate is provided, with a focus on physico-chemical and biological processes. The biological treatment, such as aerobic and anaerobic digestion, is an excellent technique for treating highly concentrated organic pollutants in the wastewater. However, Leachate can scarcely be treated using conventional techniques since it is enriched with refractory organics and inorganic ions. It is clear from the literature review that none of the available combinations of physico-chemical and biological treatments are entirely relevant for the removal of recalcitrant organic pollutants from leachate. Recently, the photo-assisted TiO2/ZnO oxidation has shown an excessively potential and feasible way to treat landfill leachate. TiO2/ZnO photocatalysis is currently developing to treat recalcitrant organic pollutants from landfill leachate. The effect of operating parameters reveals that pH and temperature affect the reaction rate. The addition of oxidant H2O2 to the TiO2/ZnO suspension suggests that TiO2 leads to an increase in the rate of reaction when compared to ZnO. Photocatalytic remediation technique of landfill leachate would support the goal of environmental sustainability by greatly enhancing the effectiveness of treated leachate reutilization. In this review, the selection of the best photocatalytic treatment for leachate based on its systematic relevance and potential conditions, characteristics, cost-effectiveness, essential controlling, discharge limit, long-term environmental effects, and its future study perspectives are emphasized and discussed.

Zinc/carbon nanomaterials inhibit antibiotic resistance genes by affecting quorum sensing and microbial community in cattle manure production

This study used metagenomic sequencing to examine the effects of carbon-based zinc oxide nanoparticles (CZnONPs) and graphene-based zinc oxide nanoparticles (GZnONPs) on quorum sensing (QS), antibiotic resistance genes (ARGs) and microbial community changes during cattle manure production. The manure zinc content was significantly reduced in GZnONPs group. In the QS pathway, the autoinducer gene increases significantly in Control group, while the transporter and repressor genes experience a substantial increase in CZnONPs group. These results contributed to the significantly decreased the abundance of ARGs in GZnONPs group. The co-occurrence network analysis revealed a correlation between core ARGs and QS-related KEGG Orthology or ARGs' hosts, indicating that the selective pressure of zinc influences microbial QS, forming a unique ARG pattern in in vivo anaerobic fermentation. These findings suggest that implementing nutritional regulation in farming practices can serve as a preventive measure to mitigate the potential transmission of ARGs resulting from livestock waste.