Electromagnetic Interference Shielding Polymers and Nanocomposites - A Review

Highly compatible ZIF-11 MOF-embedded carbon foam nanocomposites for efficient electromagnetic wave absorption

Developing lightweight, high-performance materials for effective electromagnetic wave (EMW) absorption is crucial for the mitigation of adverse exposure to high-frequency electromagnetic radiation. In this study, we present a novel approach to achieve wide-range EM wave attenuation in the radar range (X-band) through the incorporation of a ZIF-11 MOF porous architecture in a carbon foam (CF), forming a heterogeneous distribution to enhance interface polarization and facilitate strong electromagnetic wave absorption. The structural features and composition of the synthesized hybrid composites were characterized using XRD, SEM, FTIR spectroscopy, and TGA. With precise control over variable MOF loadings, the 12% ZIF-11/CF composite achieved the best optimal EMW absorption, exhibiting a notable reflection loss of -49.12 dB with a broad effective absorption bandwidth of 4.2 GHz at 2 mm thickness, indicating 99.99% absorption and covering almost the entire X band. The porous structure of the ZIF-11/carbon foam composite was found to be ideally suited to promote multiple scattering and enhance dielectric loss, yielding improved impedance matching across the X band. Additionally, the lightweight structure maintained structural integrity, offering a promising balance of effective EM wave attenuation and low material density. This work highlights the potential of MOF-incorporated carbon composites for high-performance EMW absorption, thus providing a scalable pathway toward advanced applications in electronic, healthcare and defense technologies through effective electromagnetic interference (EMI) reduction.

Porous polymers: structure, fabrication and application

The porous polymer is a common and fascinating category within the vast family of porous materials. It offers valuable features such as sufficient raw materials, easy processability, controllable pore structures, and adjustable surface functionality by combining the inherent properties of both porous structures and polymers. These characteristics make it an effective choice for designing functional and advanced materials. In this review, the structural features, processing techniques and application fields of the porous polymer are discussed comprehensively to present their current status and provide a valuable tutorial guide and help for researchers. Firstly, the basic classification and structural features of porous polymers are elaborated upon to provide a comprehensive analysis from a mesoscopic to macroscopic perspective. Secondly, several established techniques for fabricating porous polymers are introduced, including their respective basic principles, characteristics of the resulting pores, and applied scopes. Thirdly, we demonstrate application research of porous polymers in various emerging frontier fields from multiple perspectives, including pressure sensing, thermal control, electromagnetic shielding, acoustic reduction, air purification, water treatment, health management, and so on. Finally, the review explores future directions for porous polymers and evaluates their future challenges and opportunities.

Eco-friendly cellulose paper composites: A sustainable solution for EMI shielding and green engineering applications

Cellulose paper-based composites represent a promising and sustainable alternative for electromagnetic interference (EMI) shielding applications. Derived from renewable and biodegradable cellulose fibers, these composites are enhanced with conductive fillers namely carbon nanotubes, graphene, or metallic nanoparticles, achieving efficient EMI shielding while maintaining environmental friendliness. Their lightweight, flexible nature, and mechanical robustness make them ideal for diverse applications, including wearable electronics, flexible circuits, and green electronics. This paper explores the fabrication techniques, composite properties, with particular emphasis on ways to enhance the shielding properties, and performance metrics of cellulose-based composites, highlighting their potential to replace traditional metallic materials in various EMI shielding scenarios, thus contributing to the development of eco-friendly and high-performance electronic devices. Despite advancements, challenges such as achieving uniform filler dispersion and scalability of eco-friendly production methods persist, limiting industrial application.

A Review on MXene/Nanocellulose Composites: Toward Wearable Multifunctional Electromagnetic Interference Shielding Application

With the rapid development of mobile communication technology and wearable electronic devices, the electromagnetic radiation generated by high-frequency information exchange inevitably threatens human health, so high-performance wearable electromagnetic interference (EMI) shielding materials are urgently needed. The 2D nanomaterial MXene exhibits superior EMI shielding performance owing to its high conductivity, however, its mechanical properties are limited due to the high porosity between MXene nanosheets. In recent years, it has been reported that by introducing natural nanocellulose as an organic framework, the EMI shielding and mechanical properties of MXene/nanocellulose composites can be synergically improved, which are expected to be widely used in wearable multifunctional shielding devices. In this review, the electromagnetic wave (EMW) attenuation mechanism of EMI shielding materials is briefly introduced, and the latest progress of MXene/nanocellulose composites in wearable multifunctional EMI shielding applications is comprehensively reviewed, wherein the advantages and disadvantages of different preparation methods and various types of composites are summarized. Finally, the challenges and perspectives are discussed, regarding the performance improvement, the performance control mechanism, and the large-scale production of MXene/nanocellulose composites. This review can provide guidance on the design of flexible MXene/nanocellulose composites for multifunctional electromagnetic protection applications in the future intelligent wearable field.

Recent Advances in the Tunable Optoelectromagnetic Properties of PEDOTs

Conducting polymers represent a crucial class of functional materials with widespread applications in diverse fields. Among these, poly(3,4-ethylenedioxythiophene) (PEDOT) and its derivatives have garnered significant attention due to their distinctive optical, electronic, and magnetic properties, as well as their exceptional tunability. These properties often exhibit intricate interdependencies, manifesting as synergistic, concomitant, or antagonistic relationships. In optics, PEDOTs are renowned for their high transparency and unique photoelectric responses. From an electrical perspective, they display exceptional conductivity, thermoelectric, and piezoelectric performance, along with notable electrochemical activity and stability, enabling a wide array of electronic applications. In terms of magnetic properties, PEDOTs demonstrate outstanding electromagnetic shielding efficiency and microwave absorption capabilities. Moreover, these properties can be precisely tailored through molecular structure modifications, chemical doping, and composite formation to suit various application requirements. This review systematically examines the mechanisms underlying the optoelectromagnetic properties of PEDOTs, highlights their tunability, and outlines prospective research directions. By providing critical theoretical insights and technical references, this review aims to advance the application landscape of PEDOTs.

Poly(3,4-Ethylenedioxythiophene):Sulfamic Acid Modified Aramid Nanofibers: An Innovative Conductive Polymer With Enhanced Electromagnetic Interference Shielding and Thermoelectric Performance

The development of alternative conductive polymers for the well-known poly (3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) is of great significance for improving the stability in long-term using and high-temperature environments. Herein, an innovative PEDOT:S-ANF aqueous dispersion is successfully prepared by using sulfamic acid (SA) to modified aramid nanofibers (S-ANF) as an alternative dispersant for PSS and the subsequent in situ polymerization of PEDOT. Thanks to the excellent film forming ability and surface negative groups of S-ANF, the PEDOT:S-ANF films show comparable tensile strength and elongation to unmodified PEDOT:ANF. Meanwhile, PEDOT:S-ANF has a high conductivity of 27.87 S cm-1, which is more than 20 times higher than that of PEDOT:PSS. The film exhibits excellent electromagnetic interference (EMI) shielding and thermoelectric performance, with a shielding effectiveness (SE) of 31.14 dB and a power factor (PF) of 0.43 µW m-1K-2. As a substitute for PSS, S-ANF exhibits significant structural and physicochemical properties, resulting in excellent chemical and thermal stability. Even under harsh conditions such as immersing to 0.1 M HCl, 0.1 M NaOH, and 3.5% NaCl solution, or high temperature conditions, the PEDOT:S-ANF films still maintain exceptional EMI shielding performance. Therefore, this multifunctional conductive polymer exhibits enormous potential and even proves its reliability in extreme situations.

A review on recent progress in polymer composites for effective electromagnetic interference shielding properties - structures, process, and sustainability approaches

The rapid proliferation and extensive use of electronic devices have resulted in a meteoric increase in electromagnetic interference (EMI), which causes electronic devices to malfunction. The quest for the best shielding material to overcome EMI is boundless. This pursuit has taken different directions, right from materials to structures to process, up to the concept of sustainable materials. The emergence of polymer composites has substituted metal and metal alloy-based EMI shielding materials due to their unique features such as light weight, excellent corrosion resistance, and superior electrical, dielectric, thermal, mechanical, and magnetic properties that are beneficial for suppressing the EMI. Therefore, polymer nanocomposites are an extensively explored EMI shielding materials strategy. This review focuses on recent research developments with a major emphasis on structural aspects and processing for enhancing the EMI shielding effectiveness of polymer nanocomposites with their underlying mechanisms and some glimpses of the sustainability approaches taken in this field.

Advanced Functional Electromagnetic Shielding Materials: A Review Based on Micro-Nano Structure Interface Control of Biomass Cell Walls

Research efforts on electromagnetic interference (EMI) shielding materials have begun to converge on green and sustainable biomass materials. These materials offer numerous advantages such as being lightweight, porous, and hierarchical. Due to their porous nature, interfacial compatibility, and electrical conductivity, biomass materials hold significant potential as EMI shielding materials. Despite concerted efforts on the EMI shielding of biomass materials have been reported, this research area is still relatively new compared to traditional EMI shielding materials. In particular, a more comprehensive study and summary of the factors influencing biomass EMI shielding materials including the pore structure adjustment, preparation process, and micro-control would be valuable. The preparation methods and characteristics of wood, bamboo, cellulose and lignin in EMI shielding field are critically discussed in this paper, and similar biomass EMI materials are summarized and analyzed. The composite methods and fillers of various biomass materials were reviewed. this paper also highlights the mechanism of EMI shielding as well as existing prospects and challenges for development trends in this field.

Synthesis of biopolymer blends nanocomposites embedded with mono-(Ag, Fe) and bi-(Ag-Fe) metallic nanoparticles using an eco-friendly approach for antimicrobial activities

Plant-mediated solution casting is used to develop eco-friendly polymer blend nanocomposites from polyvinyl alcohol (PVA) and polyvinylpyrrolidone (PVP) doped with Silver (Ag), Ferrous (Fe) monometallic and Silver-Ferrous (Ag-Fe) bimetallic nanoparticles (NPs). These nanocomposites were studied to understand their electromagnetic interface (EMI) shielding efficiency and antimicrobial activities, besides evaluating their physical and chemical properties. The Fourier transform infrared (FTIR), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and energy dispersive X-ray (EDX) characterization techniques were used to examine the interactions between the polymers, the presence of silver and ferrous particles in the composites, the crystallinity shift, the surface morphology, the shape and size of the nanoparticles and the distribution of the nanoparticles in the composites. The FTIR spectra showed the interactions among the components of the composites. According to XRD spectra, the incorporation of nanoparticles into the PVA polymer significantly reduced the crystalline character of the polymer from 0.38 to 0.24 for the composition consisting of silver and iron nanoparticles in equal proportion. The results from SEM, EDX and XRD corroborate the presence of nanoparticle forms. The thermogravimetric analysis (TGA) tests reveal that the thermal stability of bimetallic composites is greater than that of monometallic composites. The tensile properties showed that the addition of nanoparticles to the PVA/PVP polymer matrix increased its mechanical strength from 59.3 MPa to 85.5 MPa. We examined its efficacy against Escherichia coli, Staphylococcus aureus and Candida albicans as microorganisms. Good antibacterial and antifungal activity was observed. The bimetallic composites demonstrated greater activity than monometallic composites against these bacterial and fungal species. All bimetallic nanocomposites have shown enhanced, loss due to reflection, loss due to absorption, and the total EMI shielding efficiency at 8 GHz (X-band) and 16 GHz (Ku-band) frequency. All these results ratify, that these newly developed bio nanocomposites are most suitable in many applications, in EMI shielding, nanotechnology, and medical fields.

Electrophysical Characteristics of Acrylonitrile Butadiene Styrene Composites Filled with Magnetite and Carbon Fiber Fillers

With the rapid development of wireless communication technologies and the miniaturization trend in the electronics industry, the reduction of electromagnetic interference has become an important issue. To solve this problem, a lot of attention has been focused on polymer composites with combined functional fillers. In this paper, we report a method for creating an acrylonitrile butadiene styrene (ABS) plastic composite with a low amount of conductive carbon and magnetic fillers preparation. Also, we investigate the mechanical, thermophysical, and electrodynamic characteristics of the resulting composites. Increasing the combined filler amount in the ABS composite from 1 to 5 wt % leads to a composite conductivity growth of almost 50 times. It is necessary to underline the temperature decrease of 5 wt % mass loss and, accordingly, the composite heat resistance reduction with an increase in the combined filler from 1 to 5 wt %, while the thermal conductivity remains almost constant. It was established that electrodynamic and physical-mechanical characteristics depend on the agglomeration of fillers. This work is expected to reveal the potential of combining commercially available fillers to construct effective materials with good electromagnetic interference (EMI) protection using mass production methods (extrusion and injection molding).

Recent advancements in bio-based dielectric and piezoelectric polymers and their biomedical applications

The advent of polymer-based dielectrics marked a significant breakthrough in dielectric materials. However, despite their many advantages, they pose serious environmental threats. Therefore, in recent years, there has been growing interest in bio-based polymers as a sustainable alternative to traditional petroleum-based polymers. Their renewable nature and reduced environmental impact can fulfil the rising demand for eco-friendly substitutes. Beyond their ecological benefits, bio-based polymers also possess distinctive electrical properties that make them extremely attractive in a variety of applications. Considering these, herein, we present recent advancements in bio-based dielectric polymers and nanocomposites. First, the fundamental concepts of dielectric and polymer-based dielectric materials are covered. Then, we will delve into the discussion of recent advancements in the dielectric properties and thermal stability of bio-based polymers, including polylactic acid, polyhydroxyalkanoates, polybutylene succinate, starch, cellulose, chitosan, chitins, and alginates, and their nanocomposites. Other novel bio-based dielectric polymers and their distinct dielectric characteristics have also been pointed out. In an additional section, the piezoelectric properties of these polymers and their recent biomedical applications have been highlighted and discussed thoroughly. In conclusion, this paper thoroughly discusses the recent advances in bio-based dielectric polymers and their potential to revolutionize the biomedical industry while cultivating a more sustainable and greener future.

Robust ultrahigh electromagnetic interference shielding effectiveness based on engineered structures of carbon nanotube films

High-performance electromagnetic interference (EMI) shielding materials with ultrathin, flexible, and pliable mechanical properties are highly desired for high-end equipments, yet there remain large challenges in the manufacture of these materials. Here, carbon nanotube film (CNTF)/copper (Cu) nanoparticle (NP) composite films are fabricated via a facile electrodeposition method to achieve high electromagnetic shielding efficiency. Notably, a CNTF/Cu NP composite film with 15 μm thickness can achieve excellent EMI shielding efficiency of ∼248 dB and absolute EMI shielding effectiveness as high as 2.17 × 105 dB cm2 g-1, which are the best values for composite EMI shielding materials with similar or greater thicknesses. These engineered composite films exhibit excellent deformation tolerance, which ensures the robust reliability of EMI shielding efficiency after 20,000 cycles of repeated bending. Our results represent a critical breakthrough in the preparation of ultrathin, flexible, and pliable shielding films for applications in smart, portable and wearable electronic devices, and 5G communication.

3D printed lightweight honeycomb vent structures with subsequent coating of silver nanowires for efficient electromagnetic interference (EMI) shielding

In light of the rapid advancements within the electronic industry, the urgent need for the development and implementation of advanced electromagnetic interference (EMI) shielding materials has become paramount. Herein a novel approach is presented for developing of lightweight honeycomb structures using 3D printing technology, combined with subsequent conductive spray coating, containing Silver Nanowires (AgNWs), to achieve effective EMI shielding as well as air vent functionality for thermal cooling. Using polyol method, AgNWs were synthesized having high aspect ratio and crystallinity for to be used as conductive coating on 3D printed structures. The EMI shielding results in X-band demonstrated that the developed structures exhibit promising EMI shielding properties, up to 35 dB attenuation with 2 mm honeycomb cell size, making them suitable for applications requiring EMI protection along with air venting. More importantly in all samples major contribution of the shielding efficiency comes from the absorption of the EM waves (up to 75 %) inside the structures which is helpful to reduce reflected EM noise. Effort was to effectively addresses the inherent limitations of conventional processing technology, by using additive manufacturing and material science to create structures for EMI shielding applications, bridging the gap between existing materials and desired components.

Optimization of CoFe2O4 nanoparticles and graphite fillers to endow thermoplastic polyurethane nanocomposites with superior electromagnetic interference shielding performance

The rapid growth, integration, and miniaturization of electronics have raised significant concerns about how to handle issues with electromagnetic interference (EMI), which has increased demand for the creation of EMI shielding materials. In order to effectively shield against electromagnetic interference (EMI), this study developed a variety of thermoplastic polyurethane (TPU)-based nanocomposites in conjunction with CoFe2O4 nanoparticles and graphite. The filler percentage and nanocomposite thickness were tuned and optimized. The designed GF15-TPU nanocomposite, which has a 5 mm thickness, 15 weight percent cobalt ferrite nanoparticles, and 35 weight percent graphite, showed the highest total EMI shielding effectiveness value of 41.5 dB in the 8.2-12.4 GHz frequency range, or 99.993% shielding efficiency, out of all the prepared polymer nanocomposites. According to experimental findings, the nanocomposite's dipole polarization, interfacial polarization, conduction loss, eddy current loss, natural resonance, exchange resonance, multiple scattering, and high attenuation significantly contribute to improving its electromagnetic interference shielding properties. The created TPU-based nanocomposites containing graphite and CoFe2O4 nanoparticles have the potential to be used in communication systems, defense, spacecraft, and aircraft as EMI shielding materials.

A Comprehensive Review of Electromagnetic Interference Shielding Composite Materials

The interaction between matter and microwaves assumes critical significance due to the ubiquity of wireless communication technology. The selective shielding of microwaves represents the only way to achieve the control on crucial technological sectors. The implementation of microwave shielding ensures the proper functioning of electronic devices. By preventing electromagnetic pollution, shielding safeguards the integrity and optimal performances of devices, contributing to the reliability and efficiency of technological systems in various sectors and allowing the further step forwards in a safe and secure society. Nevertheless, the microwave shielding research is vast and can be quite hard to approach due to the large number and variety of studies regarding both theory and experiments. In this review, we focused our attention on the comprehensive discussion of the current state of the art of materials used for the production of electromagnetic interference shielding composites, with the aim of providing a solid reference point to explore this research field.

Self-Assembly TiO2-Ti3C2Tx Ball-Plate Structure for Highly Efficient Electromagnetic Interference Shielding

MXene is a promising candidate for the next generation of lightweight electromagnetic interference (EMI) materials owing to its low density, excellent conductivity, hydrophilic properties, and adjustable component structure. However, MXene lacks interlayer support and tends to agglomerate, leading to a shorter service life and limiting its development in thin-layer electromagnetic shielding material. In this study, we designed self-assembled TiO2-Ti3C2Tx materials with a ball-plate structure to mitigate agglomeration and obtain a thin-layer and multiple absorption porous materials for high-efficiency EMI shielding. The TiO2-Ti3C2Tx composite with a thickness of 50 μm achieved a shielding efficiency of 72 dB. It was demonstrated that the ball-plate structure generates additional interlayer cavities and internal interface, increasing the propagation path for an electromagnetic wave, which, in turn, raises the capacity of materials to absorb and dissipate the wave. These effects improve the overall EMI shielding performance of MXene and pave the way for the development of the next-generation EMI shielding system.

Evaluating the Electromagnetic Shielding of Continuous Carbon Fiber Parts Produced by Additive Manufacturing

Electronic devices are sensitive to electromagnetic (EM) emissions, and require electromagnetic shielding protection to ensure good operation, and prevent noise, malfunctioning, or even burning. To ensure protection, it is important to develop suitable material and design solutions for electronic enclosures. Most common enclosures are made with metal alloys using traditional manufacturing methods. However, using thermoplastic composites combined with additive manufacturing (AM) technologies emerges as an alternative that enables the fabrication of complex parts that are lightweight, consolidated, and oxidation- and corrosion-resistant. In this research, an AM technique based on material extrusion was used to print 2 mm-thick specimens with a multi-material made of micro-carbon fiber (CF)-filled polyamide that was reinforced at specific layers using continuous carbon fibers stacked with a 90° rotation to each other. The specimens' electromagnetic shielding effectiveness (EMSE) was evaluated in the frequency band of 0.03-3 GHz using the coaxial transmission line method. Depending on the number of CF layers, the EM shielding obtained can be up to 70 dB, with a specific shielding up to 60 dB.cm3/g, predominantly by the absorption mechanism, being 22 times higher than without the CF layers. These findings promote this innovative approach to lightweight customizable solutions for EM shielding applications.

PVDF/poly(3-methylthiophene)/MWCNT nanocomposites for EMI shielding in the microwave range

This work presents a new approach to enhance EMI shielding efficiency of nanocomposites of dielectric polymers, multiwalled carbon nanotubes (MWCNTs) and intrinsically conducting polymers for account of using core-shell morphology for conducting components. To realize this approach new ternary nanocomposites of poly(vinylidene fluoride) (PVDF), MWCNTs and poly(3-methylthiophene) doped by Cl- anions (P3MT) were prepared through synthesis of thermally stable core/shell nanocomposites PVDF/P3MT and MWCNT/P3MT. These binary nanocomposites were mixed with pure MWCNTs or PVDF followed by compression molding to prepare the ternary nanocomposites of different morphology to discriminate their EMI shielding properties in a wide frequency range (1-67 GHz). Values of the tangent of dielectric loss angle, the efficiency of transmission, reflection and absorption of microwave radiation, and shielding efficiency (SE) of the specified materials were found from analysis of spectral dependences of their complex dielectric constants. It was shown that while the melt mixing of the binary PVDF/P3MT nanocomposite with MWCNTs both in a pure state and in the binary nanocomposite (MWCNT/P3MT) expectedly strongly enhances SE of the former, this effect is non-linear and depends on presence/absence of the P3MT shell on the MWCNT core. The ternary nanocomposite PVDF/P3MT/MWCNT made of the binary polymer-polymer nanocomposite PVDF/P3MT and pure MWCNTs showed highest SE values at the frequencies above 4.5 GHz up to 68.4 dB at 67 GHz in the case of the 1 mm thickness sample. However, below 4.5 GHz the SE was higher in the case of the ternary nanocomposites containing core/shell MWCNT/P3MT nanocomposite instead of pure MWCNT.

Efficient Electromagnetic Wave Absorption and Thermal Infrared Stealth in PVTMS@MWCNT Nano-Aerogel via Abundant Nano-Sized Cavities and Attenuation Interfaces

Pre-polymerized vinyl trimethoxy silane (PVTMS)@MWCNT nano-aerogel system was constructed via radical polymerization, sol-gel transition and supercritical CO2 drying. The fabricated organic-inorganic hybrid PVTMS@MWCNT aerogel structure shows nano-pore size (30-40 nm), high specific surface area (559 m2 g-1), high void fraction (91.7%) and enhanced mechanical property: (1) the nano-pore size is beneficial for efficiently blocking thermal conduction and thermal convection via Knudsen effect (beneficial for infrared (IR) stealth); (2) the heterogeneous interface was beneficial for IR reflection (beneficial for IR stealth) and MWCNT polarization loss (beneficial for electromagnetic wave (EMW) attenuation); (3) the high void fraction was beneficial for enhancing thermal insulation (beneficial for IR stealth) and EMW impedance match (beneficial for EMW attenuation). Guided by the above theoretical design strategy, PVTMS@MWCNT nano-aerogel shows superior EMW absorption property (cover all Ku-band) and thermal IR stealth property (ΔT reached 60.7 °C). Followed by a facial combination of the above nano-aerogel with graphene film of high electrical conductivity, an extremely high electromagnetic interference shielding material (66.5 dB, 2.06 mm thickness) with superior absorption performance of an average absorption-to-reflection (A/R) coefficient ratio of 25.4 and a low reflection bandwidth of 4.1 GHz (A/R ratio more than 10) was experimentally obtained in this work.

Research Progress on Intrinsically Conductive Polymers and Conductive Polymer-Based Composites for Electromagnetic Shielding

Electromagnetic shielding materials are special materials that can effectively absorb and shield electromagnetic waves and protect electronic devices and electronic circuits from interference and damage by electromagnetic radiation. This paper presents the research progress of intrinsically conductive polymer materials and conductive polymer-based composites for electromagnetic shielding as well as an introduction to lightweight polymer composites with multicomponent systems. These materials have excellent electromagnetic interference shielding properties and have the advantages of electromagnetic wave absorption and higher electromagnetic shielding effectiveness compared with conventional electromagnetic shielding materials, but these materials still have their own shortcomings. Finally, the paper also discusses the future opportunities and challenges of intrinsically conductive polymers and composites containing a conductive polymer matrix for electromagnetic shielding applications.

Heterogeneous Ti3C2Tx MXene-MWCNT@MoS2 Film for Enhanced Long-Term Electromagnetic Interference Shielding in the Moisture Environment

MXene, as a novel two-dimensional (2D) material, has unique inherent features such as lightweight, flexibility, high electrical conductivity, customizable surface chemistry, and facile solution processability. However, utilizing MXene (Ti3C2Tx) films for long-term electromagnetic interference (EMI) shielding poses challenges, as they are susceptible to chemical deterioration through oxidation into TiO2. In this work, an ultrathin heterogeneous film of Ti3C2Tx MXene integrated with multiwalled carbon nanotubes supporting MoS2 clusters (MXene/MWCNT@MoS2) was developed. The heterogeneous film with 15 wt % of MWCNT@MoS2 clusters exhibited improved EMI shielding performance such as the highest EMI shielding effectiveness of 50 dB and the specific shielding effectiveness of 20,355 dB cm2 g -1, mainly attributed to the excellent electrical conductivity, distinctive porous structure, and multiple interfacial interactions. The heterogeneous films underwent extended exposure to a moisture environment (35 days), and their structural stability and EMI shielding performance were enhanced by the integration of MWCNT@MoS2 clusters. As a result, the engineered heterostructure of multilayered hybrid films holds promise as a viable option for improving the EMI shielding effectiveness and stability of Ti3C2Tx MXene.

Synthesis, Properties, and Applications of Nanocomposite Materials Based on Bacterial Cellulose and MXene

MXene exhibits impressive characteristics, including flexibility, mechanical robustness, the capacity to cleanse liquids like water through MXene membranes, water-attracting nature, and effectiveness against bacteria. Additionally, bacterial cellulose (BC) exhibits remarkable qualities, including mechanical strength, water absorption, porosity, and biodegradability. The central hypothesis posits that the incorporation of both MXene and bacterial cellulose into the material will result in a remarkable synthesis of the attributes inherent to MXene and BC. In layered MXene/BC coatings, the presence of BC serves to separate the MXene layers and enhance the material's integrity through hydrogen bond interactions. This interaction contributes to achieving a high mechanical strength of this film. Introducing cellulose into one layer of multilayer MXene can increase the interlayer space and more efficient use of MXene. Composite materials utilizing MXene and BC have gained significant traction in sensor electronics due to the heightened sensitivity exhibited by these sensors compared to usual ones. Hydrogel wound healing bandages are also fabricated using composite materials based on MXene/BC. It is worth mentioning that MXene/BC composites are used to store energy in supercapacitors. And finally, MXene/BC-based composites have demonstrated high electromagnetic interference (EMI) shielding efficiency.

Multifunctional Flexible AgNW/MXene/PDMS Composite Films for Efficient Electromagnetic Interference Shielding and Strain Sensing

With the rapid development of electronic information technology, composite materials with outstanding performance in terms of electromagnetic interference (EMI) shielding and strain sensing are crucial for next-generation smart wearable electronic devices. However, the fabrication of flexible composite films with dual functionality remains a significant challenge. Herein, multifunctional flexible composite films with exciting EMI shielding and strain sensing properties were constructed using a facile vacuum-assisted filtration process and transfer method. The films consisted of ultrathin AgNW/MXene (Ti3C2Tx)/AgNW conductive networks (1 μm) attached to a flexible polydimethylsiloxane (PDMS) substrate. The obtained AgNW/MXene/PDMS composite film exhibited an exceptional EMI shielding effectiveness of 50.82 dB and good flexibility (retaining 93.67 and 90.18% of its original value after 1000 bending and stretching cycles, respectively), which are attributed to the enhanced multilayer internal reflection network created by the AgNWs and MXene as well as the synergistic effect of PDMS. Besides EMI shielding, the composite films also displayed remarkable strain sensing properties. They exhibited a wide linear range of tensile strain up to 68% with a gauge factor of 468. They also showed fast response, ultralow detection limit, and high mechanical stability. Interestingly, the composite films could also detect motion and voice recognition, demonstrating their potential as wearable sensors. This study highlights the effectiveness of multifunctional flexible AgNW/MXene/PDMS composite films in resisting electromagnetic radiation and monitoring human motion, thereby providing a promising solution for the development of flexible wearable electronic devices in complex electromagnetic environments.

Enhanced ultra high frequency EMI shielding with controlled ITO nano-branch width via different tin material types

The development of technologies for electromagnetic wave contamination has garnered attention. Among the various electromagnetic wave frequencies, for high frequencies such as those in the K and Ka ranges, there is a limitation of using only the properties of a single material. Therefore, it is necessary to improve the absorption coefficients by increasing the path of electromagnetic waves through internal scattering at an interface or a structure inside the material. Here, we accurately demonstrated the role of Sn in the growth of an indium tin oxide (ITO) nano-branch structure and grew high-density ITO nano-branches with the lowest thickness possible. Consequently, we obtained shielding efficiencies of 21.09 dB (K band) and 17.81 dB (Ka band) for a film with a thickness of 0.00364 mm. Owing to the significantly high specific shielding efficiency and low thickness and weight, it is expected to be applied in various fields.

Synthesis and characterization of PANI and PANI-indole copolymer and study of their antimalarial and antituberculosis activity

The preparation of polyaniline (PANI) and its copolymer with indole involved a chemical oxidative polymerization method, with benzene sulfonic acid (BSA, C6H6O3S) used as a dopant and potassium persulfate (PPS, K2S2O8) as an oxidant. The synthesized compounds underwent characterization using FTIR, 1H-NMR, TGA, and GPC techniques, which allowed the calculation of their average molecular weight and polydispersity index (PDI) through the GPC technique. The PDI values of the PANI copolymer with indole in different aniline-to-indole ratios were 1.53, 1.13, and 1.532 for 1:1, 1:2, and 2:1 ratios, respectively. Thermal stability was determined using TGA, revealing that the indole heterocyclic compound increased the inflexibility of the polymer chains in the synthesized PANI copolymer. The structure of the copolymer was further analyzed using 1HNMR and FTIR techniques, which confirmed the existence of benzenoid and quinoid groups in the PANI-indole copolymers, as well as the effect of doping on the polymer chains. The antibacterial and antifungal properties of the copolymers were studied against several bacterial and fungal strains and measured in terms of minimum inhibitory concentration. Results indicated that the inhibition rate of the PANI-indole copolymer on S. pyogenus (MTCC 442) was higher than that of standard drugs and individual PANI. The PANI-indole copolymers also displayed excellent antituberculosis and antimalarial activities, with the synthesized copolymer showing better outcomes than individual PANI.

Flexible, ultrathin and light films from one-dimensional nanostructures of polypyrrole and cellulose nanofibers for high performance electromagnetic interference shielding

Combining highly conducting one-dimensional nanostructures of polypyrrole with cellulose nanofibers (CNF) into flexible films with tailored electrical conductivity and mechanical properties presents a promising route towards the development of eco-friendly electromagnetic interference shielding devices. Herein, conducting films with a thickness of 140 μm were synthesized from polypyrrole nanotubes (PPy-NT) and CNF using two approaches, i.e., a new one-pot synthesis consisting of in situ polymerization of pyrrole in the presence of structure guiding agent and CNF, and a two-step synthesis, in which CNF and PPy-NT were physically blended. Films based on one-pot synthesis (PPy-NT/CNF_in) exhibited higher conductivity than those processed by physical blending, which was further enhanced up to 14.51 S cm^-1 after redoping using HCl post-treatment. PPy-NT/CNF_in containing the lowest PPy-NT loading (40 wt%), thus the lowest conductivity (5.1 S cm^-1), displayed the highest shielding effectiveness of -23.6 dB (>90 % attenuation), thanks to the good balance between its mechanical properties and electrical conductivity.

Reduced Graphene Oxide/Barium Ferrite Ceramic Nanocomposite Synergism for High EMI Wave Absorption

The developed nanocomposite exhibits significantly enhanced shielding performance due to the synergistic effect of high dielectric and magnetic loss materials, which modifies the material's impedance and improves its absorption ability. Different weight percentages (0, 1, 5, 10, 15, 20, and 25 wt %) of thermally treated chemically reduced graphene oxide (TCRGO) were combined with two types of magnets, barium hexaferrite (BF) and magnetite (MAG), using a dry powder compaction technique to produce binary ceramic nanocomposite sheets. The shielding performance of a 1 mm thick compressed nanoceramic sheet over the X-band was evaluated using a vector network analyzer. The 25% TCRGO showed high shielding performance for both BF and MAG, while BF had a total shielding efficiency (SET) that exceeded MAG by 130%. The SET of 25 wt % TCRGO/BF was 52 dB, with a 41 dB absorption shielding efficiency (SEA). Additionally, the effect of different levels of incident electromagnetic wave power (0.001-1000 mW) at various thicknesses (1, 2, and 5 mm) was explored. At 1000 mW, the 5 mm TCRGO/BF had an SET of 99 dB, an SEA of 91 dB, and a reflection shielding efficiency (SER) of 8 dB. The use of BF as a hard magnet paired with TCRGO exhibited excellent and stable electromagnetic shielding performance.

Recent advances in the development of MXenes/cellulose based composites: A review

Over the past few years, transition metal carbides, nitrides, and carbonitrides, commonly referred to as MXenes have been discovered and utilized quickly in a range of technical fields due to their distinctive and controlled characteristics. MXenes are a new class of two-dimensional (2D) materials that have found extensive use in a variety of fields, including energy storage, catalysis, sensing, biology, and other scientific disciplines. This is because of their exceptional mechanical and structural characteristics, metal electrical conductivity, and other outstanding physical and chemical properties. In this contribution, we review recent cellulose research advances and show that MXene hybrids are effective composites that benefit from cellulose superior water dispersibility and the electrostatic attraction between cellulose and MXene to prevent MXene accumulation and improve the composite's mechanical properties. Electrical, materials, chemical, mechanical, environmental, and biomedical engineering are all fields in which cellulose/MXene composites are used. These properties and applications-based reviews on MXene/cellulose composite, critically analyze the results and accomplishments in these fields and provide context for potential future research initiatives. It examines newly reported applications for cellulose nanocomposites assisted by MXene. To support their development and future applications, perspectives and difficulties are suggested in the conclusion.

Exposure to the electric field: A potential way to block the aggregation of histidine tautomeric isomers of β-amyloid

Controlling protein misfolding and accumulation in neurodegeneration is a challenge in chemical neuroscience. The application of appropriate electric fields (EFs) can be a potential noninvasive therapy to treat neuro disorders. The effect of EFs of varying intensities and directions on the conformational dynamics of β-Amyloid40 (Aβ40) under histidine tautomerism has been investigated for the first time. Our findings suggest that peptides tend to align their dipole moments with the orientation of EF. Irrespective of the EF direction, the dipole moment magnitude is affected by the EF strength. With the conformational changes, the EF strength equal to 0.5 V/nm destroyed the β-sheet content of the δδδ isomer as a potentially toxic agent. The content of the alpha-helical structure which can be transformed into the β-sheet is reduced. The strength of the EF showed a significant influence on the reduction of the number of intra-protein hydrogen bonds especially when EF is equal to 0.5 V/nm which could facilitate destabilization of the structure of the peptides. Current findings provide quantitative insights into the tautomerization-mediated Aβ40 dynamic and conformational changes induced by the external EFs in aqueous solutions, which may provide beneficial information for use as a therapeutic technique.

Fabrication of Ni-Encapsulated Carbon Tube/Poly(dimethylsiloxane) Composite Materials for Lightweight and Flexible Electromagnetic Interference Shielding Material

The exploration of flexible and lightweight electromagnetic interference (EMI) shielding materials with excellent shielding effectiveness, as a means to effectively alleviate electromagnetic pollution, is still a tremendous challenge. This paper proposes a conducting material named the textured Ni-encapsulated carbon tube, which can be applied in EMI shielding material by being inserted in the center of a poly(dimethysiloxane) (PDMS) polymer. We demonstrated that Pd²⁺ could be absorbed by the active groups on the plant fiber surface to catalyze the reduction of Ni²⁺ as a catalytic center by means of a textured Ni-encapsulated plant fiber. Owing to the outstanding heat-conducting capability of the Ni coating, the inner plant fiber was carbonized and attached to the Ni-tube inside the surface during annealing. To be precise, the textured Ni-encapsulated C tube was fabricated successfully after annealing at 300 °C. On further increasing the annealing temperature, the C tube disappeared gradually with the Ni coating being oxidized to NiO. Of note, the C tube acted as a support layer for the external Ni coating, providing sufficient mechanical strength. When combined with the coating PDMS layer, a flexible and lightweight EMI shielding material is fabricated successfully. It displays an outstanding EMI shielding effectiveness of 31.34 dB and a higher specific shielding efficiency of 27.5 dB·cm³/g, especially showing excellent mechanical property and flexibility with only 2 mm thickness. This study provides a new method to fabricate outstanding EMI shielding materials.

Research Progress with Membrane Shielding Materials for Electromagnetic/Radiation Contamination

As technology develops at a rapid pace, electromagnetic and radiation pollution have become significant issues. These forms of pollution can cause many important environmental issues. If they are not properly managed and addressed, they will be everywhere in the global biosphere, and they will have devastating impacts on human health. In addition to minimizing sources of electromagnetic radiation, the development of lightweight composite shielding materials to address interference from radiation has become an important area of research. A suitable shielding material can effectively reduce the harm caused by electromagnetic interference/radiation. However, membrane shielding materials with general functions cannot effectively exert their shielding performance in all fields, and membrane shielding materials used in different fields must have specific functions under their use conditions. The aim of this review was to provide a comprehensive review of these issues. Firstly, the causes of electromagnetic/radiation pollution were briefly introduced and comprehensively identified and analyzed. Secondly, the strategic solutions offered by membrane shielding materials to address electromagnetic/radiation problems were discussed. Then, the design concept, technical innovation, and related mechanisms of the existing membrane shielding materials were expounded, the treatment methods adopted by scholars to study the environment and performance change laws were introduced, and the main difficulties encountered in this area of research were summarized. Finally, on the basis of a comprehensive analysis of the protection provided by membrane shielding materials against electromagnetic/radiation pollution, the action mechanism of membrane shielding materials was expounded in detail, and the research progress, structural design and performance characterization techniques for these materials were summarized. In addition, the future challenges were prospected. This review will help universities, research institutes, as well as scientific and technological enterprises engaged in related fields to fully understand the design concept and research progress of electromagnetic/radiation-contaminated membrane shielding materials. In addition, it is hoped that this review will facilitate efforts to accelerate the research and development of membrane shielding materials and offer potential applications in areas such as electronics, nuclear medicine, agriculture, and other areas of industry.

Shielding Capability Research on Composite Base Materials in Hybrid Neutron-Gamma Mixed Radiation Fields

The ¹⁶N monitoring system operates in a mixed neutron-gamma radiation field and is subject to high background radiation, thus triggering instability in the ¹⁶N monitoring system measurement data. Due to its property of actual physical process simulation, the Monte Carlo method was adopted to establish the model of the ¹⁶N monitoring system and design a structure-functionally integrated shield to realize neutron-gamma mixed radiation shielding. First, the optimal shielding layer with a thickness of 4 cm was determined in this working environment, which had a significant shielding effect on the background radiation and improved the measurement of the characteristic energy spectrum and the shielding effect on neutrons was better than gamma shielding with the increase in the shield thickness. Then, functional fillers such as B, Gd, W, and Pb were added to the matrix to compare the shielding rates of three matrix materials of polyethylene, epoxy resin, and 6061 aluminum alloy at 1 MeV neutron and gamma energy. The shielding performance of epoxy resin as the matrix material was better than that of the aluminum alloy and polyethylene, and the shielding rate of boron-containing epoxy resin was 44.8%. The γ-ray mass attenuation coefficients of lead and tungsten in the three matrix materials were simulated to determine the best material for the gamma shielding performance. Finally, the optimal materials for neutron shielding and gamma shielding were combined, and the shielding performance of single-layer shielding and double-layer shielding in mixed radiation field was compared. The optimal shielding material-boron-containing epoxy resin was determined as the shielding layer of the ¹⁶N monitoring system to realize the integration of structure and function, which provides a theoretical basis for the selection of shielding materials in a special working environment.

Multilayer Ultrathin MXene@AgNW@MoS2 Composite Film for High-Efficiency Electromagnetic Shielding

Structure and material composition is crucial in realizing high electromagnetic interference (EMI) shielding effectiveness (SE). Herein, an ultrathin MXene@AgNW@MoS₂ (MAM) composite film that resembles the structure of a pork belly and exhibits superior EMI shielding performance was fabricated via the vacuum-assisted suction filtration process and atomic layer deposition (ALD). The staggered AgNWs form skeletons and intersperse in MXene sheets to build a doped layer with three-dimensional network structures, which improves the electrical conductivity of the film. Based on the optimal dispersion concentration of Ag in doped and single layers, the MXene/AgNW doped layer and AgNW single layer are alternately vacuum-assisted-filtered to obtain laminated structures with multiple heterogeneous interfaces. These interfaces generate interface polarization and increase multiple reflection and scattering, resulting in the increased electromagnetic (EM) wave losses. On the other hand, MoS₂ outer nanolayers fabricated precisely by ALD effectively increases the absorption proportion of electromagnetic waves, reduces the secondary reflection, and improves the stability of EMI shielding properties. Ultimately, an ultrathin MAM film (a thickness of 0.03 mm) with five alternating internal layers and MoS₂ outer layers exhibits an excellent EMI SE of 86.3 dB in the X-band.

Synthesis and microwave absorption studies on 2D graphitic carbon nitride loaded polyaniline/polyvinyl alcohol nanocomposites

A light weight electromagnetic interference (EMI) shielding and microwave absorbing composite films has been developed by loading varying weight content of graphitic carbon nitride (g-C3N4) nanosheets and polyaniline (PANI) into polyvinyl alcohol (PVA) matrix. The prepared PVA/PANI/g-C3N4 (1%, 3%, 5%) composites has been subjected to FTIR, X-Ray powder diffraction, SEM, Thermal studies, Dielectric studies and electromagnetic shielding effectiveness (EMI SE) analysis. The PVA/PANI/g-C3N4 (1%, 3%, 5%) composites was discovered to have improved electrical conductivity, dielectric loss, and dielectric constant. It is observed from the SEM images that the sheet layers of g-C3N4 are wrapped by the polymer matrix and the morphology to PVA/PANI composite in the g-C3N4 indicates homogeneous blending of PVA/PANI without any phase separation and has porous in it. The PANI/g-C3N4 fractured surfaces present are smooth but irregular in appearance indicating good compatibility between the PVA and PANI matrices. The dielectric properties was found to increase on increasing the concentration of the g-C3N4 nanofiller and reached a maximum of 9.8 × 106 at 1 MHz for 3% g-C3N4 in PVA/PANI. The incorporation of g-C3N4 into PVA/PANI enhanced the conductivity and the 5% g-C3N4 loaded composite film exhibited a conductivity value of 0.043 S/cm at 1 MHz. The PVA/PANI/g-C3N4 (1%, 3%, 5%) composites exhibited potential EMI SE values ranging from 24 to 35 dB at 8.6 GHz and from 42 to 63 dB at 12.4 GHz, for instance the PVA/PANI/g-C3N4 5% composite showed highest value of 63 dB at 12.4 GHz. The PVA/PANI/g-C3N4 5% exhibits the maximum highest reflection loss 8 GHz–12 GHz in which the higher absorption of −36 dB is observed at 10.3 GHz of the X-band region.

A 3D printed sandwich-type piezoelectric motor with a surface texture

Polymer-based piezoelectric motors have excellent properties, such as lightweight and corrosion resistance. In addition, 3D printing and customized additive manufacturing of polymers provide new opportunities for the development of piezoelectric motors with complex or special structures. In this paper, a 3D printed polymer-based sandwich-type piezoelectric motor operating in a single longitudinal mode is developed. A vibration decomposition model of the motor and an analytical model considering polymer viscoelasticity are established to analyze the dynamic characteristics and to determine the geometric structure of the motor. To increase the coefficient of friction, a polymer surface texture is utilized on the contacts. The experimental results show that the friction coefficient of the contact tip with surface texture is about 0.16, which increased by 45.5% compared to a smooth surface. The resonance frequency is 28.648 kHz, and the maximum no-load speed under 300 V_p-p is 54 r/min. Our study shows the promise of polymer-based materials in the development of the piezoelectric motor.

High Electromagnetic Shielding Effect of Carbon Nanotubes/Waterborne Polyurethane Composites Prepared by "Break-Adsorption" Method

In recent years, conductive polymer composites have been widely studied for their electrical conductivity and electromagnetic shielding effects due to their advantages of light weight, simple preparation methods, and structural design versatility. In this study, oxidized multi-walled carbon nanotubes/waterborne polyurethane composites (OCNT/WPU) were prepared by grafting oxidized carbon nanotubes onto polyurethane molecular chains through in situ polymerization, using environmentally friendly waterborne polyurethane as the polymer matrix. Then, the OCNT/WPU structure was broken by high shear force, and the loading of CNTs was increased by adsorption, and a new composite structure was designed (denoted by OCWPU). The structure and morphology of OCNT/WPU and OCWPU were characterized by FT-IR and SEM. The structure and morphology of OCWPU with different multi-walled carbon nanotube loadings (CNTs/OCWPU) were characterized by SEM, Raman. Finally, the electrical conductivity and the electromagnetic shielding properties of the composites were investigated. It was found that after application of high shear force, the structure of OCWPU was disrupted and the surface activity of the material increased. With the increase in CNTs content, CNTs formed a rosette structure in the polyurethane matrix and covered the surface, and its electromagnetic shielding effect in X-bond (8.2-12.4 Ghz) would be able to reach 23 dB at 5% CNTs/OCWPU and 66.5 dB at 50% CNTs/OCWPU to meet the commercial needs. With 50% CNTs/OCWPU, an electrical conductivity of 5.1 S/cm could be achieved. This work provides a novel idea for the structural design of conductive polymer composites, which can achieve greater performance with the same carbon nanotube content.

Graphene fibre film/polydimethylsiloxane nanocomposites for high-performance electromagnetic interference shielding

Exploration of high-performance electromagnetic interference (EMI) shielding materials has become a trend to address the increasing electromagnetic (EM) wave pollution environment. In this paper, oriented graphene fibre film (GFF)/polydimethylsiloxane (PDMS) nanocomposites with one-ply unidirectional, two-ply cross-ply, and two-ply unidirectional configurations were prepared using wet-spinning and hot-pressing techniques in a two-step process. Due to the anisotropic electrical performance of GFF, the one-ply laminate exhibits EMI shielding anisotropy that is affected by fibre orientation relative to the electric field component in EM waves. The maximum shielding difference at 8.8 GHz is up to 32.0 dB between the fibre orientation parallel to and perpendicular to the electric field component. In addition, we found that adding a layer of GFF is an intuitive method to enhance the shielding efficiency (SE) of GFF/PDMS nanocomposites by providing more interfaces to enhance absorption losses. An optimal EMI shielding performance of a two-ply unidirectional laminate is observed with an SE value of 50.6 dB, which shields 99.999% of EM waves. The shielding mechanisms are also discussed and clarified from the results of both experimental and theoretical analyses by adjusting the GFF structural parameters, such as the fibre orientation, areal density, number of plies and stacking sequence.

Metamaterial Absorbers: From Tunable Surface to Structural Transformation

Since the first demonstration, remarkable progress has been made in the theoretical analysis, structural design, numerical simulation, and potential applications of metamaterial absorbers (MAs). With the continuous advancement of novel materials and creative designs, the absorption of MAs is significantly improved over a wide frequency spectrum from microwaves to the optical regime. Further, the integration of active elements into the MA design allows the dynamical manipulation of electromagnetic waves, opening a new platform to push breakthroughs in metadevices. In the last several years, numerous efforts have been devoted to exploring innovative approaches for incorporating tunability to MAs, which is highly desirable because of the progressively increasing demand on designing versatile metadevices. Here, a comprehensive and systematical overview of active MAs with adaptive and on-demand manner is presented, highlighting innovative materials and unique strategies to precisely control the electromagnetic response. In addition to the mainstream method by manipulating periodic patterns, two additional approaches, including tailoring dielectric spacer and transforming overall structure are called back. Following this, key parameters, such as operating frequency, relative tuning range, and switching speed are summarized and compared to guide for optimum design. Finally, potential opportunities in the development of active MAs are discussed.

Multifunctional MXene/Aramid Nanofiber Composite Films for Efficient Electromagnetic Interference Shielding and Repeatable Early Fire Detection

Rapid development of highly integrated electronic and telecommunication devices has led to urgent demands for electromagnetic interference (EMI) shielding materials that incorporate flame retardancy, and more desirably the early fire detection ability, due to the potential fire hazards caused by heat propagation and thermal failure of the devices during operation. Here, multifunctional flexible films having the main dual functions of high EMI shielding performance and repeatable fire detection ability are fabricated by vacuum filtration of the mixture of MXene and aramid nanofiber (ANF) suspensions. ANFs serve to reinforce MXene films via the formation of hydrogen bonding between the carbonyl groups of ANFs and the hydroxyl groups of MXene. When the ANF content is 20 wt %, the tensile strength of the film is increased from 24.6 MPa for a pure MXene film to 79.5 MPa, and such a composite film (9 μm thickness) exhibits a high EMI shielding effectiveness (SE) value of ∼40 dB and a specific SE (SSE) value of 4361.1 dB/mm. Upon fire exposure, the composite films can trigger the fire detection system within 10 s owing to the thermoelectric property of MXene. The self-extinguishing feature of ANFs ensures the structural integrity of the films during burning, thus allowing for continuous alarm signals. Moreover, the films also exhibit excellent Joule heating and photothermal conversion performances with rapid response and sufficient heating reliability.

Study on Regenerative Processing Performance of Chlorinated Polyethylene Based on Wireless Network and Artificial Intelligence Technology

The development of Information Technology has intruded the chemical industry. In the conventional chemical industry, humans are involved in monitoring the chemical evaporation processes. If there is any damage, then humans suffer enormously. These drawbacks are overcome in the chemical industry by implanting the sensors to the required blocks for monitoring the levels of chemical substances. An alert system can be introduced with an artificial intelligence algorithm to regenerate the process using details updated in the database. In this research, the machine-based Time-Temperature Superposition (TTS) method is implemented to monitor the chemical reactions in the chemical component manufacturing company.

Tailoring Nylon 6/Acrylonitrile-Butadiene-Styrene Nanocomposites for Application against Electromagnetic Interference: Evaluation of the Mechanical, Thermal and Electrical Behavior, and the Electromagnetic Shielding Efficiency

Nylon 6/acrylonitrile-butadiene-styrene nanocomposites were prepared by mixing in a molten state and injection molded for application in electromagnetic interference shielding and antistatic packaging. Multi-wall carbon nanotubes (MWCNT) and maleic anhydride-grafted ABS compatibilizer were incorporated to improve the electrical conductivity and mechanical performance. The nanocomposites were characterized by oscillatory rheology, Izod impact strength, tensile strength, thermogravimetry, current-voltage measurements, shielding against electromagnetic interference, and scanning electron microscopy. The rheological behavior evidenced a severe increase in complex viscosity and storage modulus, which suggests an electrical percolation phenomenon. Adding 1 to 5 phr MWCNT into the nanocomposites produced electrical conductivities between 1.22 × 10⁻⁶ S/cm and 6.61 × 10⁻⁵ S/cm. The results make them suitable for antistatic purposes. The nanocomposite with 5 phr MWCNT showed the highest electromagnetic shielding efficiency, with a peak of –10.5 dB at 9 GHz and a value around –8.2 dB between 11 and 12 GHz. This was possibly due to the higher electrical conductivity of the 5 phr MWCNT composition. In addition, the developed nanocomposites, regardless of MWCNT content, showed tenacious behavior at room temperature. The results reveal the possibility for tailoring the properties of insulating materials for application in electrical and electromagnetic shielding. Additionally, the good mechanical and thermal properties further widen the application range.

Interfused core-shell heterogeneous graphene/MXene fiber aerogel for high-performance and durable electromagnetic interference shielding

Flexible, lightweight, and durable electromagnetic interference (EMI) shielding materials are urgently required to solve the increasingly serious electromagnetic radiation pollution. Transition metal carbides/nitrides (MXenes) are promising candidates for EMI shielding materials because of their excellent metallic electrical conductivity. However, MXenes are highly susceptible to oxidization when exposed to wet environments, leading to the loss of their functional properties and degradation of reliability and stability. Herein, an interfused core-shell heterogeneous reduced graphene oxide (rGO)/MXene aerogel (GMA) is designed for the first time via coaxial wet spinning and freeze-drying. The fabricated GMAs exhibit excellent EMI shielding performance, and the EMI shielding effectiveness (SE) and specific EMI SE can be up to 83.3 dB and 3119 dB·cm³/g, respectively, which is higher than most carbon-based and MXene-based aerogels and foams. More importantly, GMAs have only a 17.4 % degradation in EMI shielding performance after 120 days due to the protection of hydrophobic graphene sheath, exhibiting superior EMI shielding durability to its MXene film counterpart. Moreover, the hydrophobic GMAs exhibit good oil/water separation and thermal insulation performance. The interfused core-shell GMAs are highly promising for applications in durable EMI shielding, thermal insulation, oil/water separation and sensors, etc.

A flexible, robust and multifunctional montmorillonite/aramid nanofibers@MXene electromagnetic shielding nanocomposite with an alternating structure for enhanced Joule heating and fire-resistant protective performance

With the rapidly increasing development of portable devices and flexible electronic devices, multifunctional composites with excellent mechanical strength, great electromagnetic interference shielding, great Joule heating performance and strong fire-resistant protective performance are noticeably required. Herein, inspired by the sandwich structure, we have designed a montmorillonite/aramid nanofibers@MXene (MMT/ANFs@MXene) nanocomposite with an alternating multilayered structure via a simple AVF process. In this nanocomposite, the ANFs/MMT (AT) layer acts as a mechanically reinforced and insulation protection layer, while the MXene layer maintains a complete conductive network. The superior alternating multilayered structure endows the nanocomposite with outstanding mechanical properties (154.66 MPa, 14.22%) and excellent EMI shielding effectiveness values (58.4 dB). In addition, the fire-resistant protective performance of the nanocomposite improves its safety and reliability, especially, the EMI shielding effectiveness is maintained at ∼34 dB after burning for 30 s. Besides, the MMT/ANFs@MXene nanocomposite shows excellent Joule heating performance with a fast thermal response, low driving voltage and long-time temperature stability, which could reach 110.2 °C at only 3 V applied voltage within 10 s. As a result, this work presents a novel strategy for constructing multifunctional composites with outstanding overall performance, which will broaden application areas and prospects in thermal management and EMI shielding in wearable products.

Recent Advances in Polymer Nanocomposites for Electromagnetic Interference Shielding: A Review

The mushrooming utilization of electronic devices in the current era produces electromagnetic interference (EMI) capable of disabling commercial and military electronic appliances on a level like never before. Due to this, the development of advanced materials for effectively shielding electromagnetic radiation has now become a pressing priority for the scientific world. This paper reviews the current research status of polymer nanocomposite-based EMI shielding materials, with a special focus on those with hybrid fillers and MXenes. A discussion on the theory of EMI shielding followed by a brief account of the most popular synthesis methods of EMI shielding polymer nanocomposites is included in this review. Emphasis is given to unravelling the connection between microstructures of the composites, their physical properties, filler type, and EMI shielding efficiency (EMI SE). Along with EMI shielding efficiency and conductivity, mechanical properties reported for EMI shielding polymer nanocomposites are also reviewed. An elaborate discussion on the gap areas in various fields where EMI shielding materials have potential applications is reported, and future directions of research are proposed to overcome the existing technological obstacles.

Novel and Green Synthesis of Nitrogen-Doped Carbon Cohered Fe3O4 Nanoparticles with Rich Oxygen Vacancies and Its Application

A one-pot and green synthesis methodology was successfully designed to prepare nitrogen-doped carbon (NC) cohered Fe3O4 nanoparticles with rich oxygen vacancies (Fe3O4-OVs/NC). The preparation was achieved via cold-atmospheric-pressure air plasma using Fe2O3 nanoparticles as the only precursor, and pyridine as the carbon and nitrogen source. Systematic characterization results of the as-prepared Fe3O4-OVs/NC confirmed the transition from Fe2O3 to Fe3O4, along with the generation of oxygen vacancies, while preserving the original needle-like morphology of Fe2O3. Moreover, the results indicated the formation of the NC attaching to the surface of the formed Fe3O4 nanoparticles with a weight percent of ~13.6%. The synthesized nanocomposite was further employed as a heterogeneous Fenton catalyst to remove phenol from an aqueous solution. The material has shown excellent catalytic activity and stability, demonstrating a promising application for wastewater treatment.