Strain-rate frequency superposition: a rheological probe of structural relaxation in soft materials

Robust Mechanically Interlocked Network Ionogels

Ionogels have attracted considerable attention as versatile materials due to their unique ionic conductivity and thermal stability. However, relatively weak mechanical performance of many existing ionogels has hindered their broader application. Herein, we develop robust, tough, and impact-resistant mechanically interlocked network ionogels (IGMINs) by incorporating ion liquids with mechanical bonds that can dissipate energy while maintain structural stability. Profiting from the dynamic yet stable nature of the mechanically interlocked networks, IGMINs exhibit high tensile strength (9.6 MPa), fracture energy (39 kJ/m2), and toughness (25.9 MJ/m3), along with a high elongation rate (473 %) and excellent impact resistance and shape memory, resulting in overall performance that surpasses most reported ionogels. Furthermore, in the application of strain sensors for monitoring the gait of crawling robots, the toughness and robustness of IGMINs ensure their ability to consistently output stable electrical signals during the stretching and contraction processes, thereby highlighting their practical application potential. Our work provides a new research strategy for toughening ionogels and promotes the development of mechanically interlocked materials.

Covalent Adaptable Poly[2]rotaxane Networks via Dynamic C-N Bond Transalkylation

Covalent adaptable networks (CANs), a novel class of crosslinked polymers with dynamic covalent bonds, have gained significant attention for combining the durability of thermosets with the reprocessability of thermoplastics, making them promising for emerging applications. Here, we report the first example of poly[2]rotaxane-type covalent adaptable networks (PRCANs), in which oligo[2]rotaxane backbones characterized by densely packed mechanical bonds, are cross-linked through dynamic C-N bonds. The oligo[2]rotaxane backbones could guarantee the mechanical properties of the CANs. Under an external force, the synergy of numerous microscopic motions of the cascade [2]rotaxane units, progressively introducing the initially hidden short chains, expands the polymer network, imparting good stretchability to the PRCANs (217 %). On the other hand, the dissociation of host-guest recognition, followed by the motion of mechanical bonds, constitutes a unique energy dissipation pathway, ultimately enhancing the toughness of PRCANs (7.6 MJ/m3). In contrast, the control CAN, which lacks movable mechanical bonds, demonstrates significantly lower stretchability (40 %) and toughness (1.5 MJ/m3). Moreover, the dynamic C-N bond can undergo high efficiency of 1,2,3-triazole alkylation and trans-N-alkylation exchanges at 1,2,3-triazolium sites at elevated temperatures, with good reprocessability and without compromising their mechanical performance. This work demonstrates the great potential of oligo[2]rotaxanes as a novel polymer backbone for the development of sustainable materials with excellent mechanical properties.

Hyperbranched Vitrimer for Ultrahigh Energy Dissipation

Polymers are ideally utilized as damping materials due to the high internal friction of molecular chains, enabling effective suppression of vibrations and noises in various fields. Current strategies rely on broadening the glass transition region or introducing additional relaxation components to enhance the energy dissipation capacity of polymeric damping materials. However, it remains a significant challenge to achieve high damping efficiency through structural control while maintaining dynamic characteristics. In this work, we propose a new strategy to develop hyperbranched vitrimers (HBVs) containing dense pendant chains and loose dynamic crosslinked networks. A novel yet weak dynamic transesterification between the carboxyl and boronic acid ester was confirmed and used to prepare HBVs based on poly (hexyl methacrylate-2-(4-ethenylphenyl)-5,5-dimethyl-1,3,2-dioxaborinane) P(HMA-co-ViCL) copolymers. TheA B n ${{AB}_{n}}$ -type of macromonomers, the crosslinking points formed by the dynamic covalent connection via the associative exchange, and the weak yet dynamic exchange reaction are the three keys to developing high-performance HBV damping materials. We found that P(HMA-co-ViCL) 20k-40-60 HBV exhibited ultrahigh energy-dissipation performance over a broad frequency and temperature range, attributed to the synergistic effect of dense pendant chains and weak dynamic covalent crosslinks. This unique design concept will provide a general approach to developing advanced damping materials.

Brittle and ductile yielding in soft materials

Many soft materials yield under mechanical loading, but how this transition from solid-like behavior to liquid-like behavior occurs can vary significantly. Understanding the physics of yielding is of great interest for the behavior of biological, environmental, and industrial materials, including those used as inks in additive manufacturing and muds and soils. For some materials, the yielding transition is gradual, while others yield abruptly. We refer to these behaviors as being ductile and brittle. The key rheological signatures of brittle yielding include a stress overshoot in steady-shear-startup tests and a steep increase in the loss modulus during oscillatory amplitude sweeps. In this work, we show how this spectrum of yielding behaviors may be accounted for in a continuum model for yield stress materials by introducing a parameter we call the brittility factor. Physically, an increased brittility decreases the contribution of recoverable deformation to plastic deformation, which impacts the rate at which yielding occurs. The model predictions are successfully compared to results of different rheological protocols from a number of real yield stress fluids with different microstructures, indicating the general applicability of the phenomenon of brittility. Our study shows that the brittility of soft materials plays a critical role in determining the rate of the yielding transition and provides a simple tool for understanding its effects under various loading conditions.

Powdered Cross-Linked Gelatin Methacryloyl as an Injectable Hydrogel for Adipose Tissue Engineering

The tissue engineering field is currently advancing towards minimally invasive procedures to reconstruct soft tissue defects. In this regard, injectable hydrogels are viewed as excellent scaffold candidates to support and promote the growth of encapsulated cells. Cross-linked gelatin methacryloyl (GelMA) gels have received substantial attention due to their extracellular matrix-mimicking properties. In particular, GelMA microgels were recently identified as interesting scaffold materials since the pores in between the microgel particles allow good cell movement and nutrient diffusion. The current work reports on a novel microgel preparation procedure in which a bulk GelMA hydrogel is ground into powder particles. These particles can be easily transformed into a microgel by swelling them in a suitable solvent. The rheological properties of the microgel are independent of the particle size and remain stable at body temperature, with only a minor reversible reduction in elastic modulus correlated to the unfolding of physical cross-links at elevated temperatures. Salts reduce the elastic modulus of the microgel network due to a deswelling of the particles, in addition to triple helix denaturation. The microgels are suited for clinical use, as proven by their excellent cytocompatibility. The latter is confirmed by the superior proliferation of encapsulated adipose tissue-derived stem cells in the microgel compared to the bulk hydrogel. Moreover, microgels made from the smallest particles are easily injected through a 20G needle, allowing a minimally invasive delivery. Hence, the current work reveals that powdered cross-linked GelMA is an excellent candidate to serve as an injectable hydrogel for adipose tissue engineering.

Nanoapatite-Loaded κ-Carrageenan/Poly(vinyl alcohol)-Based Injectable Cryogel for Hemostasis and Wound Healing

Immediate control of excessive bleeding and prevention of infections are of utmost importance in the management of wounds. Cryogels have emerged as promising materials for the rapid release of medication and achieving hemostasis. However, their quick release properties pose the challenge of exposing patients to high concentrations of drugs. In this study, hybrid nanocomposites were developed to address this issue by combining poly(vinyl alcohol) and κ-carrageenan with whitlockite nanoapatite (WNA) particles and ciprofloxacin, aiming to achieve rapid hemostasis and sustained antibacterial effects. A physically cross-linked cryogel was obtained by subjecting a blend of poly(vinyl alcohol) and κ-carrageenan to successive freezing-thawing cycles, followed by the addition of WNA. Furthermore, ciprofloxacin was introduced into the cryogel matrix for subsequent evaluation of its wound healing properties. The resulting gel system exhibited a 3D microporous structure and demonstrated excellent swelling, low cytotoxicity, and outstanding mechanical properties. These characteristics were evaluated through analytical and rheological experiments. The nanocomposite cryogel with 4% whitlockite showed extended drug release of 71.21 ± 3.5% over 21 days and antibacterial activity with a considerable growth inhibition zone (4.19 ± 3.55 cm). Experiments on a rat model demonstrated a rapid hemostasis property of cryogels within an average of 83 ± 4 s and accelerated the process of wound healing with 96.34% contraction compared to the standard, which exhibited only ∼78% after 14 days. The histopathological analysis revealed that the process of epidermal re-epithelialization took around 14 days following the skin incision. The cryogel loaded with WNAs and ciprofloxacin holds great potential for strategic utilization in wound management applications as an effective material for hemostasis and anti-infection purposes.

Effect of surface acetylation of chitin nanocrystals on the preparation and viscoelasticity of sunflower seed oil-in-water Pickering emulsions

Acetylated chitin nanocrystals (ChNCs) were used as stabilizer in this work to prepare sunflower seed oil-in-water emulsions for the morphological and rheological studies. The results revealed that the acetylation with moderate degree of substitution (0.38) reduced hydrophilicity and increased surface charge level of rod-like ChNCs, and as a result, significantly improved the emulsifying ability of ChNCs. At the same oil/water ratio and particle loading, the emulsions stabilized with the acetylated ChNCs had far smaller droplet size (∼3 μm) as compared to the emulsions stabilized with the pristine ChNCs (5-7 μm). The increased droplets numbers and improved surface coating level resulted in the enhanced viscous resistance and yield stress level, which improved the physical stability of the acetylated ChNC-stabilized emulsions as a result. In addition, the droplet clusters easily formed in this system, contributing to weak strain overshoot and decreased large-deformation sensitivity during dynamic shear flow. Therefore, the acetylated ChNC-stabilized system showed enhanced transient stress overshoot during startup flow and weakened thixotropy during cyclic ramp shear flow as compared to the pristine ChNC-stabilized system. The relationships between surface acetylation of ChNCs and flow behavior of emulsions were then established, which provide valuable information on the modulation of the ChNC-stabilized Pickering emulsions.

Effect of clay-zwitterionic interactions in controlling the viscoelastic properties in organomodified clays

Investigating the rheology of 2D materials such as clays is of growing interest in various applications as it dictates their flowability and structural stability. Clay minerals present unique rheological properties, especially when in suspension. This study explores the effect of functionalizing bentonite clay with betaines of variable carbon chain lengths on the rheological properties of clay slurries to analyze their interactions in suspension. The results show that these zwitterion-functionalized clays exhibit higher viscosity, storage moduli, and flow stresses due to the formation of three-dimensional networks and increased aggregation caused by intercalation. The structural properties of the clay slurries are also found to be pH-sensitive. Additionally, XRD and SEM analyses support the proposed intercalation of the clays. The findings suggest the potential application of small-chain betaine functionalized clays in engineering and energy applications. Overall, this study provides insight into predicting the stability and strength of functionalized clay suspensions.

A life off the beaten track in biomechanics: Imperfect elasticity, cytoskeletal glassiness, and epithelial unjamming

Textbook descriptions of elasticity, viscosity, and viscoelasticity fail to account for certain mechanical behaviors that typify soft living matter. Here, we consider three examples. First, strong empirical evidence suggests that within lung parenchymal tissues, the frictional stresses expressed at the microscale are fundamentally not of viscous origin. Second, the cytoskeleton (CSK) of the airway smooth muscle cell, as well as that of all eukaryotic cells, is more solid-like than fluid-like, yet its elastic modulus is softer than the softest of soft rubbers by a factor of 104-105. Moreover, the eukaryotic CSK expresses power law rheology, innate malleability, and fluidization when sheared. For these reasons, taken together, the CSK of the living eukaryotic cell is reminiscent of the class of materials called soft glasses, thus likening it to inert materials such as clays, pastes slurries, emulsions, and foams. Third, the cellular collective comprising a confluent epithelial layer can become solid-like and jammed, fluid-like and unjammed, or something in between. Esoteric though each may seem, these discoveries are consequential insofar as they impact our understanding of bronchospasm and wound healing as well as cancer cell invasion and embryonic development. Moreover, there are reasons to suspect that certain of these phenomena first arose in the early protist as a result of evolutionary pressures exerted by the primordial microenvironment. We have hypothesized, further, that each then became passed down virtually unchanged to the present day as a conserved core process. These topics are addressed here not only because they are interesting but also because they track the journey of one laboratory along a path less traveled by.

Activity-dependent glassy cell mechanics II: Nonthermal fluctuations under metabolic activity

The glassy cytoplasm, crowded with bio-macromolecules, is fluidized in living cells by mechanical energy derived from metabolism. Characterizing the living cytoplasm as a nonequilibrium system is crucial in elucidating the intricate mechanism that relates cell mechanics to metabolic activities. In this study, we conducted active and passive microrheology in eukaryotic cells, and quantified nonthermal fluctuations by examining the violation of the fluctuation-dissipation theorem. The power spectral density of active force generation was estimated following the Langevin theory extended to nonequilibrium systems. However, experiments performed while regulating cellular metabolic activity showed that the nonthermal displacement fluctuation, rather than the active nonthermal force, is linked to metabolism. We discuss that mechano-enzymes in living cells do not act as microscopic objects. Instead, they generate meso-scale collective fluctuations with displacements controlled by enzymatic activity. The activity induces structural relaxations in glassy cytoplasm. Even though the autocorrelation of nonthermal fluctuations is lost at long timescales due to the structural relaxations, the nonthermal displacement fluctuation remains regulated by metabolic reactions. Our results therefore demonstrate that nonthermal fluctuations serve as a valuable indicator of a cell's metabolic activities, regardless of the presence or absence of structural relaxations.

Design of Intelligent Protective Composite Material with Stress Rate Sensitivity, Strong Interface Adhesion, and Recyclability

Poly(dimethyl siloxane) (PDMS) elastomers play a significant role in smart materials, actuators, and flexible electronics. However, current PDMS lacks adhesion abilities and intelligent responsive properties, which limit its further application. In this study, the polydimethylsiloxane-ureidopyrimidinone impact hardening polymer (PDMS-UI) composites are manufactured by a dual cross-linking compositing tactic. PDMS, a chemically stable cross-linked network, acts as a framework owing to its excellent mechanical strength, whereas UI, a reversible dynamic physically cross-linked network with quadruple hydrogen bonding, endows the PDMS-UI with excellent self-healing ability (efficiency > 90%) and energy absorption (75.23%). Impressively, owing to multivalent hydrogen bonds, the PDMS-UI exhibits superior adhesion performance: the adhesion strength on various substrates exceed 150 kPa and that on the Ferrum substrate reaches 570 kPa. These outstanding properties make the PDMS-UI a potential candidate for application in both well-developed fields, such as, wearable protective materials, artificial skin and soft robotics.

Activity-dependent glassy cell mechanics Ⅰ: Mechanical properties measured with active microrheology

Active microrheology was conducted in living cells by applying an optical-trapping force to vigorously fluctuating tracer beads with feedback-tracking technology. The complex shear modulus G(ω)=G'(ω)-iG″(ω) was measured in HeLa cells in an epithelial-like confluent monolayer. We found that G(ω)∝(-iω)1/2 over a wide range of frequencies (1 Hz < ω/2π < 10 kHz). Actin disruption and cell-cycle progression from G1 to S and G2 phases only had a limited effect on G(ω) in living cells. On the other hand, G(ω) was found to be dependent on cell metabolism; ATP-depleted cells showed an increased elastic modulus G'(ω) at low frequencies, giving rise to a constant plateau such that G(ω)=G0+A(-iω)1/2. Both the plateau and the additional frequency dependency ∝(-iω)1/2 of ATP-depleted cells are consistent with a rheological response typical of colloidal jamming. On the other hand, the plateau G0 disappeared in ordinary metabolically active cells, implying that living cells fluidize their internal states such that they approach the critical jamming point.

Shear-Thickening Covalent Adaptive Networks for Bifunctional Impact-Protective and Post-Tunable Tactile Sensors

Shear-thickening materials have been widely applied in fields related to smart impact protection due to their ability to absorb large amounts of energy during sudden shock. Shear-thickening materials with multifunctional properties are expanding their applications in wearable electronics, where tactile sensors require interconnected networks. However, current bifunctional shear-thickening cross-linked polymer materials depend on supramolecular networks or slightly dynamic covalently cross-linked networks, which usually exhibit lower energy-absorption density than the highly dynamic covalently cross-linked networks. Herein, we employed boric ester-based covalent adaptive networks (CANs) to elucidate the shear-thickening property and the mechanism of energy dissipation during sudden shock. Guided by the enhanced energy-absorption capability of double networks and the requirements of the conductive networks for the wearable tactile sensors, tungsten powders (W) were incorporated into the boric ester polymer matrix to form a second network. The W networks make the materials stiffer, with a 13-fold increase in Young's modulus. Additionally, the energy-absorption capacity increased nearly 7 times. Finally, we applied these excellent energy-absorbing and conductive materials to bifunctional shock-protective and strain rate-dependent tactile sensors. Considering the self-healable and recyclable properties, we believe that these anti-impact and tactile sensing materials will be of great interest in wearable devices, smart impact-protective systems, post-tunable materials, etc.

Injectable Microporous Annealed Particle Hydrogel Based on Guest-Host-Interlinked Polyethylene Glycol Maleimide Microgels

Microporous annealed particle (MAP) hydrogels have emerged as a versatile biomaterial platform for regenerative medicine. MAP hydrogels have been used for the delivery of cells and organoids but often require annealing post injection by an external source. We engineered an injectable, self-annealing MAP hydrogel with reversible interparticle linkages based on guest-host functionalized polyethylene glycol maleimide (PEG-MAL) microgels. We evaluated the effect of guest-host linkages on different types of microgels fabricated by either batch emulsion or mechanical fragmentation methods. Batch emulsion generated small spherical microgels with controllable 10-100 μm diameters and mechanical fragmentation generated irregular microgels with larger diameters (100-200 μm). Spherical microgels (15 μm) showed self-healing behavior and completely recovered from high strain while fragmented microgels (133 μm) did not recover. Guest-host interactions significantly contributed to the mechanical properties of spherical microgels but had no effect on fragmented microgels. Spherical microgels were superior to the fragmented microgels for co-injection of immune cells and pancreatic islets due to their lower force of injection, demonstrating more homogeneously distributed cells and greater cell viability after injection. Based on these studies, the spherical guest-host MAP hydrogels provide a controllable, injectable scaffold for engineered microenvironments and cell delivery applications.

Role of dynamic bonds on fatigue threshold of tough hydrogels

SignificanceDynamic bonds have been found to enhance fracture toughness of hydrogels as sacrificial bonds, but the role of dynamic bonds to fatigue threshold of hydrogels is poorly understood because the wide dynamic range of viscoelastic response imposes a challenge on fatigue experiments. Here, by using polyampholyte hydrogels, we adopted a time-salt superposition principle to access a wide range of time scales that are otherwise difficult to access in fatigue tests. Relations between fatigue threshold and strain rate in elastic and viscoelastic regimes and the corresponding mechanism correlated to permanent/dynamic bonds were revealed. We believe that this work gives important insight into the design and development of fatigue-resistant soft materials composed of dynamic bonds.

A broad perspective to particle-laden fluid interfaces systems: from chemically homogeneous particles to active colloids

Particles adsorbed to fluid interfaces are ubiquitous in industry, nature or life. The wide range of properties arising from the assembly of particles at fluid interface has stimulated an intense research activity on shed light to the most fundamental physico-chemical aspects of these systems. These include the mechanisms driving the equilibration of the interfacial layers, trapping energy, specific inter-particle interactions and the response of the particle-laden interface to mechanical perturbations and flows. The understanding of the physico-chemistry of particle-laden interfaces becomes essential for taking advantage of the particle capacity to stabilize interfaces for the preparation of different dispersed systems (emulsions, foams or colloidosomes) and the fabrication of new reconfigurable interface-dominated devices. This review presents a detailed overview of the physico-chemical aspects that determine the behavior of particles trapped at fluid interfaces. This has been combined with some examples of real and potential applications of these systems in technological and industrial fields. It is expected that this information can provide a general perspective of the topic that can be exploited for researchers and technologist non-specialized in the study of particle-laden interfaces, or for experienced researcher seeking new questions to solve.

Modulation of soft glassy dynamics in aqueous suspensions of an anisotropic charged swelling clay through pH adjustment

HYPOTHESIS

Sodium-montmorillonite (Na-Mt) particles are geometrically anisometric that carry a pH dependent anisotropic surface charge. Therefore, it should be possible to manipulate the particle-particle interaction of colloidal range Na-Mt suspensions through pH changes which in turn should alter the soft glassy dynamics of Na-Mt suspensions.

EXPERIMENTS

Rheological experiments were used to probe the impact of pH mediated colloidal particle-particle interaction on the physical aging, linear viscoelastic response, and yield stress behavior of Na-Mt suspension.

FINDINGS

The temporal evolution of the storage modulus (G') was stronger in the acid regime (pH < 9.5) than the base (pH ≥ 9.5) pH regime. Horizontal shifting of the aging curves in the acid and base regimes led to aging time-H⁺ concentration and aging time-OH^- concentration superposition. An aging time-Na-Mt concentration superposition was also observed in both pH regimes. The critical stress associated with the viscosity bifurcation behavior increased linearly with G' but with different slopes for acid and base regime. We propose that positively charged patches on the Na-Mt particle edge merge with the characteristic surface as a function of H⁺ ions in the system. This leads to a strongly associated microstructure at low pH and a relatively weak but associated microstructure at natural pH, hence confirming the hypothesis.

Physical aging in aqueous nematic gels of a swelling nanoclay: sol (phase) to gel (state) transition

Aqueous dispersions of geometrically anisometric, nano-sized sodium-montmorillonite (Na-Mt) display a sol-gel transition at very low solids concentrations. The microstructure of the gel formed at very low ionic strengths is considered electrostatically repulsive with a nematic character, and the gel state at ionic strengths where Debye length is of the order of particle size is conjectured to be free of physical aging. We investigated the nature of osmotically prepared Na-Mt dispersions at low ionic strength (∼10^-5 M), below and above the gel point. The sol phase exhibited very low yield stress compared to the gel state, without any sign of physical aging, thus behaving as an equilibrium state. In contrast, the gel exhibited signatures of physical aging, that is, an evolving microstructure that consolidated with time when left undisturbed thus behaving as out of equilibrium state. The physical aging behaviour became more pronounced at Na-Mt concentrations far above the gel point. A critical shear rate existed, below which no stable flows were possible in the gel state representing the microstructural reorganization timescale. Overall, Na-Mt dispersions in the gel state behave like systems that were out of equilibrium with an ever-evolving microstructure, in opposition to the assumption that low ionic strength Na-Mt gels are in an equilibrium phase. The possible origin of physical aging, such as the reversible orientation of Brownian anisotropic particles, stiffening of an existing microstructure, or reorganization of microstructure towards minimal energy configuration is discussed in detail.

Mechanically Robust, Self-Healable Polymers Usable under High Humidity: Humidity-Tolerant Noncovalent Cross-Linking Strategy

Although mechanically robust polymer materials had not been thought to self-heal, we recently found that poly(ether thiourea) PTUEG₃, which is a glassy polymer with high mechanical strength, self-heals even at ambient temperatures. This finding updated the above preconception. Nevertheless, it should also be noted that PTUEG₃, under high humidity, absorbs water and is plasticized to lose its mechanical strength. Humidity-induced plasticization is a general problem for polymers with polar groups. Herein, we report that PTUEG₃, if designed by copolymerization to contain only 10 mol % of a dicyclohexylmethane (Cy₂M) thiourea unit (TUCy₂M), serves as a humidity-tolerant, mechanically robust polymer material that can self-heal at ambient temperatures. This copolymer contained, in its ether thiourea (TUEG₃)-rich domain, a humidity-tolerant, noncovalently cross-linked 3D network with mechanical robustness formed by stacking of the Cy₂M group. The present work provides a promising design strategy for mechanically robust, self-healable polymers usable under high humidity.

Rheological implications of pH induced particle-particle association in aqueous suspension of an anisotropic charged clay

Kaolinite particles are geometrically anisometric and electrostatically anisotropic. Until recently, the charge of both basal faces of kaolinite was assumed to be independent of pH, and the isoelectric point (IEP) of the edge surface was thought to occur at pH 4-6. Therefore, kaolinite suspensions were expected to have an edge-face association at low pH. However, recent atomic force microscopy (AFM) studies have shown that the kaolinite alumina basal face and edge surface carry a pH-dependent surface charge with an IEP at pH 5-6 and ∼ 3, respectively. Here, we revisit the modes of particle association in kaolinite suspensions and apply Derjaguin-Landau-Verwey-Overbeek (DLVO) theory to study the rheological implications of surface charges of various kaolinite faces from recent AFM-based studies. Specifically, aging within the linear viscoelastic region, small amplitude oscillatory shear behavior (strain amplitude and frequency response), and critical stress behavior were studied as a function of pH. Kaolinite suspensions (40 wt%) exhibited two-step structure recovery after shear rejuvenation and two-step yielding at pH less than the IEP of the alumina basal face. In addition, the storage modulus (G') and critical stress required to stabilize the flow followed non-monotonic behavior as a function of pH. At low pH, the silica face-alumina face mode of association was expected to be dominant rather than the edge-face microstructure. A peak in the G'vs. pH curve at pH 4.5-5 was correlated with the silica face-alumina face attraction estimated from DLVO theory, which passes through a maximum at approximately the same pH. Based on these observations, we propose a qualitative state diagram for kaolinite suspensions in the pH-concentration space.

Development of a separated-dough method and flour/starch replacement in gluten free crackers by cellulose and fibrillated cellulose

Two strategies were combined and applied in this study to achieve a desired structure and texture of gluten free crackers and to reduce the calorie content. The first strategy is increasing structural heterogeneity of crackers and doughs and a separated-dough method was developed. A butter dough and a water dough were prepared separately and mixed together and the influence of mixing time was investigated. In the second strategy, which is the incorporation of a structuring material, powdered cellulose and fibrillated cellulose were incorporated in formulation to replace flour and pregelatinised starch with enhanced health benefits of low calorie and high fibre. Powdered cellulose played the role of the skeleton of the gluten free crackers. A laminar structure was observed in crackers when powdered cellulose was initially added to the butter dough. The crackers exhibit high thickness, hardness and fracturability and sharp sound emission which are typically observed in wheat crackers. Pregelatinised starch can be replaced by fibrillated cellulose at a lower addition level.

The force loading rate drives cell mechanosensing through both reinforcement and cytoskeletal softening

Cell response to force regulates essential processes in health and disease. However, the fundamental mechanical variables that cells sense and respond to remain unclear. Here we show that the rate of force application (loading rate) drives mechanosensing, as predicted by a molecular clutch model. By applying dynamic force regimes to cells through substrate stretching, optical tweezers, and atomic force microscopy, we find that increasing loading rates trigger talin-dependent mechanosensing, leading to adhesion growth and reinforcement, and YAP nuclear localization. However, above a given threshold the actin cytoskeleton softens, decreasing loading rates and preventing reinforcement. By stretching rat lungs in vivo, we show that a similar phenomenon may occur. Our results show that cell sensing of external forces and of passive mechanical parameters (like tissue stiffness) can be understood through the same mechanisms, driven by the properties under force of the mechanosensing molecules involved.

Conducting polymer-based granular hydrogels for injectable 3D cell scaffolds

Injectable 3D cell scaffolds possessing both electrical conductivity and native tissue-level softness would provide a platform to leverage electric fields to manipulate stem cell behavior. Granular hydrogels, which combine jamming-induced elasticity with repeatable injectability, are versatile materials to easily encapsulate cells to form injectable 3D niches. In this work, we demonstrate that electrically conductive granular hydrogels can be fabricated via a simple method involving fragmentation of a bulk hydrogel made from the conducting polymer PEDOT:PSS. These granular conductors exhibit excellent shear-thinning and self-healing behavior, as well as record-high electrical conductivity for an injectable 3D scaffold material (~10 S m-1). Their granular microstructure also enables them to easily encapsulate induced pluripotent stem cell (iPSC)-derived neural progenitor cells, which were viable for at least 5 days within the injectable gel matrices. Finally, we demonstrate gel biocompatibility with minimal observed inflammatory response when injected into a rodent brain.

Unification of the Rheological Physics of Yield Stress Fluids

The physics above and below the yield stress is unified by a simple model for viscoplasticity that accounts for the nonlinear rheology of multiple yield stress fluids. The model has a rate-dependent relaxation time, allows for plastic deformation below the yield stress, and indicates that rapid elastic deformation aids yielding. A range of commonly observed rheological behaviors are predicted, including the smooth overshoot in the loss modulus and the recently discovered contributions from recoverable and unrecoverable strains in amplitude sweeps.

A comprehensive investigation of gluten free bread dough rheology, proving and baking performance and bread qualities by response surface design and principal component analysis

Contribution of methylcellulose (MC), psyllium seed husk powder (PSY), and water addition level to gluten free bread quality and correlations between dough rheological properties and bread qualities were investigated by response surface design and principal component analysis. The generalised Maxwell model was applied to estimate the relaxation frequency of gluten free doughs. The addition of PSY has a complex influence on pasting viscosity at high temperature and an additional peak was observed. MC significantly influenced dough extensibility and work of adhesion, which are good predictors of bread volume and textural properties. Other rheological responses are less significantly correlated to specific volume, but they are sensitive to formulation variations, reflect dough structures and stability, related to proving behaviours, and correlated to loaf concavity. An inappropriate combination of water and hydrocolloids might lead to problems such as low stability of doughs, overexpansion, and weak crumb structure at high water addition levels, or, in contrast, high rigidity of dough, a trap of excessive air during mixing, and restrained gas cell expansion with high hydrocolloid addition and low water addition.

Probing gels and emulsions using large-amplitude oscillatory shear and frictional studies with soft substrate skin surrogates

Water swellable crosslinked polymers are widely used in oil-in-water emulsions for the healthcare and cosmetic industries due to their thickening properties. In this study, we investigate the rheological and lubrication behavior of a microgel-forming polymer, a lightly-crosslinked hydrophobically modified polyacrylic acid (HMPAA), in an aqueous medium and in an emulsion. Hydrogenated phosphatidylcholine, a class of phospholipids, is used as a surfactant in the emulsions composed of different oil content. Rheological behavior is probed both in the linear and non-linear regimes using small strain amplitude and large amplitude oscillatory shear (LAOS) experiments, respectively. We observe all systems to exhibit gel-like behavior with the elastic modulus (G') dominating and being frequency independent. Lissajous-Bowditch plots and nonlinear parameters obtained under large deformation show that the emulsions can resist greater deformations with smaller increase in the viscous dissipation when compared to a HMPAA gel. For tribology experiments, friction curves in a range of entrainment speeds are examined using substrates to mimic the skin surface (PDMS and Bioskin®). The role of polymer hydrophobicity on the different substrates are also explored by comparing the behavior of HMPAA to that of its hydrophilic analog, a polyacrylic acid highly crosslinked. We find the friction coefficient to be dependent on the hydrophobicity of the substrate and the polymer as well as the substrate roughness. These results taken together provide insights in the formulation of skincare products with efficient lubrication properties for different skin characteristics.

Physical networks from entropy-driven non-covalent interactions

Physical networks typically employ enthalpy-dominated crosslinking interactions that become more dynamic at elevated temperatures, leading to network softening. Moreover, standard mathematical frameworks such as time-temperature superposition assume network softening and faster dynamics at elevated temperatures. Yet, deriving a mathematical framework connecting the crosslinking thermodynamics to the temperature-dependent viscoelasticity of physical networks suggests the possibility for entropy-driven crosslinking interactions to provide alternative temperature dependencies. This framework illustrates that temperature negligibly affects crosslink density in reported systems, but drastically influences crosslink dynamics. While the dissociation rate of enthalpy-driven crosslinks is accelerated at elevated temperatures, the dissociation rate of entropy-driven crosslinks is negligibly affected or even slowed under these conditions. Here we report an entropy-driven physical network based on polymer-nanoparticle interactions that exhibits mechanical properties that are invariant with temperature. These studies provide a foundation for designing and characterizing entropy-driven physical crosslinking motifs and demonstrate how these physical networks access thermal properties that are not observed in current physical networks.

Luminescent Conductive Columnar π-Gelators for Fe(II) Sensing and Bio-Imaging Applications

The high demand and scarcity of luminescent, photoconductive, and transparent gels necessitate its finding as they are potential components in photonic devices such as solar cell concentrators where optical losses via scattering and reabsorption require to be minimized. In this direction, we have reported highly transparent, blue luminescent as well as photoconductive gels exhibiting the hole mobility of 10^-3 cm²/V s at ambient temperature as investigated by the time-of-flight technique. The π-driven self-standing supergels were formed using triazole-modified phenylene-vinylene derivatives as gelators in a nonpolar solvent. Different microscopic studies revealed its entangled network of interwoven fibrilar self-assembly and anisotropic order in the gel state. Supramolecular assembly of xerogels, studied by small- and wide-angle X-ray scattering (SAXS/WAXS) suggesting their local columnar hexagonal (Col_h) superstructure, is beneficial for conducting gels. Rheological measurements direct the stiffness and robustness of the organogels. In addition, the gelators were developed as a sensing platform for the ultrasensitive detection of Fe(II) ions at ppb level. ¹H nuclear magnetic resonance (NMR) titrimetric studies revealed that the interaction of the H-atom of triazole units with Fe(II) is responsible for quenching of blue fluorescence. Also, one of the gelators was successfully applied in bio-imaging using the pollen grains of the Hibiscus rosa-sinensis plant.

Acoustic resonance in periodically sheared glass: damping due to plastic events

Using molecular dynamics simulation, we study acoustic resonance in a low-temperature model glass by applying a small periodic shear at a boundary wall. Shear wave resonance occurs as the frequency ω approaches ωl = πc⊥l/L (l = 1, 2…). Here, c⊥ is the transverse sound speed and L is the cell width. At resonance, large-amplitude sound waves appear after many cycles even if the applied strain γ0 is very small. They then induce plastic events, which are heterogeneous on the mesoscopic scale and intermittent on timescales longer than the oscillation period tp = 2π/ω. We visualize them together with the extended elastic strains around them. These plastic events serve to damp sounds. We obtain the nonlinear damping Q-1 = tan δ due to the plastic events near the first resonance at ω ≅ ω1, which is linear in γ0 and independent of ω. After many resonant cycles, we observe an increase in the shear modulus (measured after switching-off the oscillation). We also observe catastrophic plastic events after a very long time (∼103tp), which induce system-size elastic strains and cause a transition from resonant to off-resonant states. At resonance, stroboscopic diffusion becomes detectable.

Starch nanocrystals as the particle emulsifier to stabilize caprylic/capric triglycerides-in-water emulsions

Starch nanocrystals (SNCs) grafted with octenyl succinic anhydride (OSA) were used to stabilize caprylic/capric triglycerides (GTCC)-in-water emulsions. The morphology and viscoelasticity of emulsions were studied in terms of particle loadings and degrees of substitution (DSs). It is found that the emulsifying capacities of SNCs increase with increased DSs. Both the pristine SNC and modified ones can be well used to stabilize emulsions, whereas the emulsification follows different mechanisms. The platelet-like structure of SNCs, together with its improved amphiphilicity after surface treatments, are important to the formation and evolution of droplet clusters. The deformation and relaxation of those clusters result in weak flow overshoots and strong thixotropy in different shear flow fields, which favor storage and applications of GTCC-in-water emulsions as hydrocolloids. The mechanisms were then discussed in terms of rigidity of SNC and relaxations of clusters. This work proposes a promising application of SNC in food and cosmetic industries.

Elucidating the G″ overshoot in soft materials with a yield transition via a time-resolved experimental strain decomposition

Materials that exhibit yielding behavior are used in many applications, from spreadable foods and cosmetics to direct write three-dimensional printing inks and filled rubbers. Their key design feature is the ability to transition behaviorally from solid to fluid under sufficient load or deformation. Despite its widespread applications, little is known about the dynamics of yielding in real processes, as the nonequilibrium nature of the transition impedes understanding. We demonstrate an iteratively punctuated rheological protocol that combines strain-controlled oscillatory shear with stress-controlled recovery tests. This technique provides an experimental decomposition of recoverable and unrecoverable strains, allowing for solid-like and fluid-like contributions to a yield stress material's behavior to be separated in a time-resolved manner. Using this protocol, we investigate the overshoot in loss modulus seen in materials that yield. We show that this phenomenon is caused by the transition from primarily solid-like, viscoelastic dissipation in the linear regime to primarily fluid-like, plastic flow at larger amplitudes. We compare and contrast this with a viscoelastic liquid with no yielding behavior, where the contribution to energy dissipation from viscous flow dominates over the entire range of amplitudes tested.

Impact of mechanical history on sludge rheological properties: Role of the organic content

The rheological behavior is known to be of great interest in sludge treatment, but the material complexity induces strong measurement difficulties. The literature highlights two characteristics deeply impacting sludge rheological properties and their characterization: Thixotropic behavior and organic matter (Seyssiecq et al., 2003; Eshtiaghi et al., 2013), both being related to each other. Indeed, by looking at how thixotropy affects elastic modulus and yield stress with different mechanical histories at different organic matter ratios, it turns out that the higher the organic matter, the higher the thixotropic behavior.

The structure-property relationship in LAPONITE® materials: from Wigner glasses to strong self-healing hydrogels formed by non-covalent interactions

Rheology, small-angle X-ray scattering (SAXS), and dynamic light scattering (DLS) analysis, zeta potential measurement, scanning electron microscopy (SEM), and micro-FTIR and absorbance spectroscopy were used to enlighten the controversial literature about LAPONITE® materials. Our data suggest that pristine LAPONITE® in water does not form hydrogels induced by the so-called "house of cards" assembly, but rather forms Wigner glasses governed by repulsive forces. Ionic interactions between anisotropic LAPONITE® nanodiscs, sodium polyacrylate and inorganic salts afforded hydrogels that were transparent, self-standing, moldable, strong, and biocompatible with shear-thinning and self-healing behavior. An extensive study on the role of salts in the gelification process dictates a trend that relates the valence of cations with the viscoelastic properties of the bulk material (G' values follow the trend, monovalent < divalent < trivalent). These hydrogels present G' values up to 5.1 × 104 Pa, which are considered high values for non-covalent hydrogels. Hydrogels crosslinked with sodium phosphate salts are biocompatible, and might be valid candidates for injectable drug delivery systems due to their shear-thinning behavior with rapid self-healing after injection.

Hydrocolloid clustering based on their rheological properties

In this study, we proposed an objective classification of seven commercial hydrocolloids and four novel hydrocolloids. Total of 74 rheological parameters was generated by steady (flow behavior, hysteresis loop, single shear decay, in-shear structural recovery experiments), dynamic (strain sweep and frequency sweep tests), and transient (creep/recovery and stress relaxation) shear measurements. Subsequently, the parameters were classified into seven categories with more than 60% similarity indexes in each group using agglomerative hierarchical clustering based on those properties related to the number of linkage, strength of linkage, distance of linkage, rupture and flow, rate of destruction, the extent of destruction, and the state of destructured samples in the absence of flow field. Fuzzy c-means classifier used to extract patterns for each class. Our results correspond to four different classes; κ-carrageenan and agar gum were categorized in the first class, high methoxyl pectin, xanthan, sage seed gum and basil seed gum in the second class, alginate gum and Balangu-Shirazi seed gum in the third class, and guar gum, cress seed gum and carboxymethyl cellulose in the fourth class. Using this classification technique, complete rheological patterns can be extracted for each class. This classification provides a map for other researchers to rationally design the best test type which could describe adequately different properties of materials and avoid experiments with a similar type of parameters. The main reason for the frequent use of hydrocolloids in various industries is their ability to modify the rheology. A lot of works have been done to study the rheological behavior of many hydrocolloids in model and food systems. As there is still demand for new sources of hydrocolloids with more specific functionality in foods, probing the similarities among commercial and emerging hydrocolloids could help us to rationally design structural features in different formulations, besides gives insight into the structure-function relationship between them. This object could be attained by clustering, a part of the pattern recognition theory. Contrary to the traditional clustering methods, in which the membership of a product is exclusive for only a class, in constraint clustering by fuzzy logic methods, a partial membership can be shared by two or more classes. In this way, using the fuzzy logic clustering method, we clustered a number of commercial and novel hydrocolloids based on the steady, transient, and dynamic shear rheological properties and found a specific pattern among them. PRACTICAL APPLICATIONS: The main reason for the frequent use of hydrocolloids in various industries is their ability to modify the rheology. A lot of works have been done to study the rheological behavior of many hydrocolloids in model and food systems. As there is still demand for new sources of hydrocolloids with more specific functionality in foods, probing the similarities among commercial and emerging hydrocolloids could help us to rationally design structural features in different formulations, besides gives insight into the structure-function relationship between them. This object could be attained by clustering, a part of the pattern recognition theory. Contrary to the traditional clustering methods, in which the membership of a product is exclusive for only a class, in constraint clustering by fuzzy logic methods, a partial membership can be shared by two or more classes. In this way, using the fuzzy logic clustering method, we clustered a number of commercial and novel hydrocolloids based on the steady, transient, and dynamic shear rheological properties and found a specific pattern among them.