Hierarchy of Hybrid Materials-The Place of Inorganics-in-Organics in it, Their Composition and Applications

Synthesis and characterization of a new bio-inspired low molecular weight inorganic-organic hybrid resin with tunable properties and multifunctionality for in situ polymerization

Synthesis and characterization of a new bio-inspired low molecular weight inorganic-organic hybrid polymer with tunable properties and multifunctionality for in situ polymerization and cross linking. The hybrid bioactive polymer was synthesized through modified sol-gel method using 3- trimethoxy silyl propyl methacrylate as the precursor. The new polymer was characterized using Proton Nuclear Magnetic Resonance (1H-NMR), Carbon-13 Nuclear Magnetic Resonance Spectroscopy (13C- NMR), Atomic Force Microscopy (AFM), Transmission Electron Microscopy (TEM) for confirming the existence of inorganic as well as organic entities in the material. The volumetric shrinkage and bioactivity of the newly synthesized polymer was analyzed using Micro Computed Tomography (µ-CT) and Scanning Electron Microscopy (SEM). The excellent bioactivity with low polymerization shrinkage compared to the conventional resin used in biomedical applications, makes the new bio-inspired inorganic-organic hybrid bioactive polymer a potential resin matrix for the development of dental composites, bone cements and for coating applications.

Graphene Oxide/Zinc Phthalocyanine Selective Singlet Oxygen Visible-Light Nanosensor for Raman-Inactive Compounds

A novel phthalocyanine-based hybrid nanofilm is for the first time successfully applied as an oxidative platform for surface enhanced Raman spectroscopy (SERS) sensing to fine-resolve Raman-inactive compounds. The hybrid is formed by self-assembly of zinc(II) 2,3,9,10,16,17,23,24-Octa[(3',5'-dicarboxy)-phenoxy]phthalocyaninate (ZnPc*) with the solid-supported monolayer of graphene oxide (GO) mediated by zinc acetate metal cluster. Atomic force microscopy, UV-vis and fluorescence spectroscopies confirm that this simple coordination motive in combination with molecular structure of ZnPc* prevents contact quenching of the light-excited triplet state through aromatic stacking with GO particles. Fluorescence probing with Sensor Green and terephthalic acid as specific indicators of active oxygen intermediates shows that the hybrid nanofilm initiates selective singlet oxygen generation under visible light. Direct one-electron oxidation of tetramethylbenzidine (TMB) (1.0×10-7 m) on the hybrid surface in the presence of 100 nm silver nanoparticles as plasmonic hot-spots under 450-640-nm light irradiation yields well-resolved resonance Raman spectrum of the oxidized form TMB+1. Using these hybrid nanofilms as visible light platforms for redox reaction of target analytes without additional oxidizing agents, the range of Raman-detectable compounds can be significantly expanded through a rapid ultrasensitive SERS screening of substances currently considered Raman-inactive.

Nanoarchitectonics of Sustainable Food Packaging: Materials, Methods, and Environmental Factors

Nanoarchitectonics influences the properties of objects at micro- and even macro-scales, aiming to develop better structures for protection of product. Although its applications were analyzed in different areas, nanoarchitectonics of food packaging-the focus of this review-has not been discussed, to the best of our knowledge. The (A) structural and (B) functional hierarchy of food packaging is discussed here for the enhancement of protection, extending shelf-life, and preserving the nutritional quality of diverse products including meat, fish, dairy, fruits, vegetables, gelled items, and beverages. Interestingly, the structure and design of packaging for these diverse products often possess similar principles and methods including active packaging, gas permeation control, sensor incorporation, UV/pulsed light processing, and thermal/plasma treatment. Here, nanoarchitechtonics serves as the unifying component, enabling protection against oxidation, light, microbial contamination, temperature, and mechanical actions. Finally, materials are an essential consideration in food packaging, particularly beyond commonly used polyethylene (PE), polypropylene (PP), polyethylene terephthalate (PET), polystyrene (PS), and polyvinyl chloride (PVC) plastics, with emphasis on biodegradable (polybutylene succinate (PBS), polyvinyl alcohol (PVA), polycaprolactone (PCL), and polybutylene adipate co-terephthalate (PBAT)) as well as green even edible (bio)-materials: polysaccharides (starch, cellulose, pectin, gum, zein, alginate, agar, galactan, ulvan, galactomannan, laccase, chitin, chitosan, hyaluronic acid, etc.). Nanoarchitechnotics design of these materials eventually determines the level of food protection as well as the sustainability of the processes. Marketing, safety, sustainability, and ethics are also discussed in the context of industrial viability and consumer satisfaction.

Synthesis of SrAl2O4 and MgCoO2 bimetallic inorganic nanomaterials for thermal and electrochemical applications

Bimetallic inorganic nanoparticles are vital due to their high biocompatibility, stability and comparatively less toxicity. Nanosized bimetallic oxide materials have been extensively studied worldwide due to their unique properties such as electrical, magnetic and mechanical properties. Present work is reporting the size-controlled synthesis of strontium aluminate and magnesium cobaltate nanoparticles (SrAl2O4 and MgCoO2) by self-propagating combustion reaction using polymer fuel. Size of the prepared SrAl2O4 and MgCoO2 samples distributed on the DLS spectrum was 76 nm and 100 nm respectively. The structural and morphological characterization of the prepared nano oxide samples were carried out by X-ray diffraction (XRD) and scanning electron microscope (SEM) analysis respectively. It shows high crystalline and compact nature of the samples. FT-IR instrumentation was used to study the bonding nature of both the oxide nano samples. Formation of metal oxide and metal-metal bonding can supports the sample formation. EDX analysis carried out to further confirm the presence of Sr, Al, Mg and Co metals and also characteristics absorption peaks of signals demonstrate the final phases of the samples. UV-vis spectroscopic analysis and fluorescence study of the samples was undertaken to know the absorption and emission behaviour respectively. In continuation, the thermal and electrochemical studies of prepared samples were analyzed. Thermal investigation assesses the thermal behaviour of the samples, which shows high thermal stability. The preliminary results of CV study concluding that, the samples are electro active nature and also show possible electrochemical applications. The insights gained from this work contribute to the growing body of knowledge in metal oxide nanomaterials and pave the way for innovations in electrical and thermal-related technologies.

Elasticity of Swollen and Folded Polyacrylamide Hydrogel Using the MARTINI Coarse-Grained Model

One of the key advantages of using a hydrogel is its superb control over elasticity obtained through variations of constituent polymer and water. The underlying molecular nature of a hydrogel is a fundamental origin of hydrogel mechanics. In this article, we report a Polyacrylamide (PAAm)-based hydrogel model using the MARTINI coarse-grained (CG) force field. The MARTINI hydrogel is molecularly developed through Iterative Boltzmann inversion (IBI) using all-atom molecular dynamics (AAMD), and its quality is evaluated through the experimental realization of the target hydrogel. The developed model offers a mechanically high-fidelity CG hydrogel that can access large-scale water-containing hydrogel behavior, which is difficult to explore through AAMD in practical time. With the modeled hydrogel, we reveal that the polymer conformation modulates the elasticity of the hydrogel from a folded state to a swollen state, confirmed by the Panyukov model. The results provide a robust bridge for linking the polymer conformations and alignment to their bulk deformation, enabling the multifaceted and material-specific predictions required for hydrogel applications.

Fibroin-Hybrid Systems: Current Advances in Biomedical Applications

Fibroin, a protein extracted from silk, offers advantageous properties such as non-immunogenicity, biocompatibility, and ease of surface modification, which have been widely utilized for a variety of biomedical applications. However, in vivo studies have revealed critical challenges, including rapid enzymatic degradation and limited stability. To widen the scope of this natural biomacromolecule, the grafting of polymers onto the protein surface has been advanced as a platform to enhance protein stability and develop smart conjugates. This review article brings into focus applications of fibroin-hybrid systems prepared using chemical modification of the protein with polymers and inorganic compounds. A selection of recent preclinical evaluations of these hybrids is included to highlight the significance of this approach.

Enhanced Antimicrobial Properties of Polymeric Denture Materials Modified with Zein-Coated Inorganic Nanoparticles

Background

Polymeric denture materials can be susceptible to colonization by oral microorganisms. Zein-coated magnesium oxide nanoparticles (zMgO NPs) demonstrate antimicrobial activity. The aim of this study was to investigate the antimicrobial effect and adherence of different oral microorganisms on hybrid polymeric denture materials incorporated with zMgO NPs.

Methods

Five types of polymeric denture materials were used. A total of 480 disc-shaped specimens were divided by material type (n=96/grp), then subdivided by zMgO NPs concentration: control with no nanoparticles and other groups with zMgO NPs concentrations of 0.3%, 0.5% and 1% by weight. Characterization of the polymeric denture materials incorporating zMgO NPs was done, and the antimicrobial activity of all groups was tested against four types of microorganisms: 1) Streptococcus mutans, 2) Staphylococcus aureus, 3) Enterococcus faecalis and 4) Candida albicans. The samples underwent an adherence test and an agar diffusion test. Experiments were done in triplicates.

Results

The characterization of the hybrid samples revealed variation in the molecular composition, as well as a uniform distribution of the zMgO NPs in the polymeric denture materials. All hybrid polymeric denture materials groups induced a statistically significant antimicrobial activity, while the control groups showed the least antimicrobial activity. The agar diffusion test revealed no release of the zMgO NPs from the hybrid samples, indicating the NPs did not seep out of the matrix.

Conclusion

The zMgO NPs were effective in reducing the adherence of the tested microorganisms and enhancing the antimicrobial activity of the polymeric denture materials. This antimicrobial effect with the polymeric dentures could aid in resisting microbial issues such as denture stomatitis.

Macro-Calcium Carbonate-Hydrogel Hybrid Spheroids: Design and Biomedical Applications

In advancing tissue engineering, we introduce a particle system combining the strength of calcium carbonate with the flexibility of hydrogels enhanced with alkaline phosphatase (ALP) for improved bone regeneration. Our innovation lies in creating large hybrid macrospheroids by bonding mineral nanostructured microparticles loaded with ALP through hydrogel polymerization. These composite macrospheroids address critical challenges in cell seeding, growth, and handling within three-dimensional (3D) environments. We conducted extensive characterization of these particles using scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), mechanical property assessment, and fluorescence microscopy. The results demonstrate that the hybrid macrospheroids significantly enhance cell manipulation and growth in three-dimensional structures. Specifically, ALP-loaded macrospheroids showed a marked improvement in osteogenic activity, promoting effective bone tissue regeneration. This study not only showcases a unique approach to overcoming the limitations of traditional hydrogels in tissue engineering but also opens pathways for bone tissue regeneration. Our findings offer a promising tool for cell seeding and growth in 3D structures, potentially revolutionizing practices in tissue engineering and regenerative medicine.

Enhanced white rot control in garlic bulbil using organic-inorganic hybrid materials as coating membranes

Organic-inorganic hybrid materials have a range of applications due to their unique properties. Their application in agriculture brings alternatives for the controlled release of nutrients in the soil, the seed coating, the transport of herbicides, and the treatment of plant diseases. The present study aimed to investigate the use of fungicides incorporated into hybrid membranes formed by synthetic hectorite (LAPONITE®) and polymers in the pre-treatment of garlic bulbils exposed to the pathogen Stromatinia cepivora, which causes white rot. The coatings were selected by a germination test, based on the bulbil sprouting index, and by a mycelial growth inhibition test, based on the percentage of mycelial growth inhibition. The chosen membranes were used to coat the bulbils for bioassays conducted in a biochemical oxygen demand incubator at 17 °C. The coated bulbils were planted in soil samples containing three different densities of Stromatinia cepivora: 0.1 g, 1.0 g, and 10 g of sclerotium per L of soil. Membranes containing 2% carboxymethyl cellulose and 2% LAPONITE® incorporated with (i) the fungicide tebuconazole (36 mg L-1) and (ii) the combination of the actives tebuconazole (36 mg L-1) and triadimenol (62 mg L-1) showed the total rate of sprouting and null indices of incidence of symptoms and mortality in its repetitions. The hybrid membranes were characterized employing several techniques, including X-ray diffraction, infrared and Raman spectroscopy, thermogravimetric analysis and differential scanning calorimetry coupled to mass spectrometry, and optical microscopy. Characterization data confirmed the presence of fungicides incorporated into the membranes. Some concentrations of fungicides were low enough not to be detected in all analyses performed, although they guaranteed a protective character to the bulbils about the fungus S. cepivora present in the soil, with a possibility of antifungal pre-treatment with a potential reduction in the concentration used.

Advances in Nanoarchitectonics: A Review of "Static" and "Dynamic" Particle Assembly Methods

Particle assembly is a promising technique to create functional materials and devices from nanoscale building blocks. However, the control of particle arrangement and orientation is challenging and requires careful design of the assembly methods and conditions. In this study, the static and dynamic methods of particle assembly are reviewed, focusing on their applications in biomaterial sciences. Static methods rely on the equilibrium interactions between particles and substrates, such as electrostatic, magnetic, or capillary forces. Dynamic methods can be associated with the application of external stimuli, such as electric fields, magnetic fields, light, or sound, to manipulate the particles in a non-equilibrium state. This study discusses the advantages and limitations of such methods as well as nanoarchitectonic principles that guide the formation of desired structures and functions. It also highlights some examples of biomaterials and devices that have been fabricated by particle assembly, such as biosensors, drug delivery systems, tissue engineering scaffolds, and artificial organs. It concludes by outlining the future challenges and opportunities of particle assembly for biomaterial sciences. This review stands as a crucial guide for scholars and professionals in the field, fostering further investigation and innovation. It also highlights the necessity for continuous research to refine these methodologies and devise more efficient techniques for nanomaterial synthesis. The potential ramifications on healthcare and technology are substantial, with implications for drug delivery systems, diagnostic tools, disease treatments, energy storage, environmental science, and electronics.

A New Look at the Mechanism of Cocrystal Formation and Coformers Exchange in Processes Forced by Mechanical and/or Thermal Stimuli - ex situ and in situ Studies of Low-Melting Eutectic Mixtures

Three different devices: ball mill, hot stage melting, and magic angle spinning (MAS) NMR rotor were used for the preparation of ethenzamide (ET) cocrystals with glutaric acid (GLU), ethylmalonic acid (EMA) and maleic acid (MAL) as coformers. In each case, well-defined binary systems (ET:EMA, ET:GLU, ET:MAL) were obtained. The common features of the two solvent free methods of cocrystal formation (grinding, melting) are presented on the basis of arguments obtained by solid state NMR spectroscopy. Thermal analysis (Differential Scanning Calorimetry) proved that the eutectic phase arises over a wide range of molar ratios of components for each of the binary systems. NMR techniques, supported by theoretical calculations, allowed to provide details about the pathway of the reaction mechanism with atomic accuracy. It was found that the formation of ET cocrystals is a complex process that requires five steps. Each step has been recognized and described. Variable temperature 1D and 2D MAS NMR experiments allowed to track physicochemical processes taking place in a molten state. Moreover, it was found that in a multicomponent mixture consisting of all four components, ET, EMA, GLU, and MAL, ET in the molten phase behaves as a specific selector choosing only one partner to form binary cocrystals according to energy preferences. The process of exchange of coformers in binary systems during grinding, melting, and NMR measurements is described. The stabilization energies (Estab ) and molecular electrostatic potential (MEP) maps computed for the cocrystals under discussion and their individual components rationalize the selection rules and explain the relationships between individual species.

Exploring the current landscape of chitosan-based hybrid nanoplatforms as cancer theragnostic

In the last decade, investigators have put significant efforts to develop several diagnostic and therapeutic strategies against cancer. Many novel nanoplatforms, including lipidic, metallic, and inorganic nanocarriers, have shown massive potential at preclinical and clinical stages for cancer diagnosis and treatment. Each of these nano-systems is distinct with its own benefits and limitations. The need to overcome the limitations of single-component nano-systems, improve their morphological and biological features, and achieve multiple functionalities has resulted in the emergence of hybrid nanoparticles (HNPs). These HNPs integrate multicomponent nano-systems with diagnostic and therapeutic functions into a single nano-system serving as promising nanotools for cancer theragnostic applications. Chitosan (CS) being a mucoadhesive, biodegradable, and biocompatible biopolymer, has emerged as an essential element for the development of HNPs offering several advantages over conventional nanoparticles including pH-dependent drug delivery, sustained drug release, and enhanced nanoparticle stability. In addition, the free protonable amino groups in the CS backbone offer flexibility to its structure, making it easy for the modification and functionalization of CS, resulting in better drug targetability and cell uptake. This review discusses in detail the existing different oncology-directed CS-based HNPs including their morphological characteristics, in-vitro/in-vivo outcomes, toxicity concerns, hurdles in clinical translation, and future prospects.

Hybrid Materials: A Metareview

The field of hybrid materials has grown so wildly in the last 30 years that writing a comprehensive review has turned into an impossible mission. Yet, the need for a general view of the field remains, and it would be certainly useful to draw a scientific and technological map connecting the dots of the very different subfields of hybrid materials, a map which could relate the essential common characteristics of these fascinating materials while providing an overview of the very different combinations, synthetic approaches, and final applications formulated in this field, which has become a whole world. That is why we decided to write this metareview, that is, a review of reviews that could provide an eagle's eye view of a complex and varied landscape of materials which nevertheless share a common driving force: the power of hybridization.

Low-Temperature Plasmas Improving Chemical and Cellular Properties of Poly (Ether Ether Ketone) Biomaterial for Biomineralization

Osteoblastic and chemical responses to Poly (ether ether ketone) (PEEK) material have been improved using a variety of low-temperature plasmas (LTPs). Surface chemical properties are modified, and can be used, using low-temperature plasma (LTP) treatments which change surface functional groups. These functional groups increase biomineralization, in simulated body fluid conditions, and cellular viability. PEEK scaffolds were treated, with a variety of LTPs, incubated in simulated body fluids, and then analyzed using multiple techniques. First, scanning electron microscopy (SEM) showed morphological changes in the biomineralization for all samples. Calcein staining, Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS) confirmed that all low-temperature plasma-treated groups showed higher levels of biomineralization than the control group. MTT cell viability assays showed LTP-treated groups had increased cell viability in comparison to non-LTP-treated controls. PEEK treated with triethyl phosphate plasma (TEP) showed higher levels of cellular viability at 82.91% ± 5.00 (n = 6) and mineralization. These were significantly different to both the methyl methacrylate (MMA) 77.38% ± 1.27, ethylene diamine (EDA) 64.75% ± 6.43 plasma-treated PEEK groups, and the control, non-plasma-treated group 58.80 ± 2.84. FTIR showed higher levels of carbonate and phosphate formation on the TEP-treated PEEK than the other samples; however, calcein staining fluorescence of MMA and TEP-treated PEEK had the highest levels of biomineralization measured by pixel intensity quantification of 101.17 ± 4.63 and 96.35 ± 3.58, respectively, while EDA and control PEEK samples were 89.53 ± 1.74 and 90.49 ± 2.33, respectively. Comparing different LTPs, we showed that modified surface chemistry has quantitatively measurable effects that are favorable to the cellular, biomineralization, and chemical properties of PEEK.

Strategies for Anisotropic Fibrillar Hydrogels: Design, Cell Alignment, and Applications in Tissue Engineering

Efficient cellular alignment in biomaterials presents a considerable challenge, demanding the refinement of appropriate material morphologies, while ensuring effective cell-surface interactions. To address this, biomaterials are continuously researched with diverse coatings, hydrogels, and polymeric surfaces. In this context, we investigate the influence of physicochemical parameters on the architecture of fibrillar hydrogels that significantly orient the topography of flexible hydrogel substrates, thereby fostering cellular adhesion and spatial organization. Our Review comprehensively assesses various techniques for aligning polymer fibrils within hydrogels, specifically interventions applied during and after the cross-linking process. These methodologies include mechanical strains, precise temperature modulation, controlled fluidic dynamics, and chemical modulators, as well as the use of magnetic and electric fields. We highlight the intrinsic appeal of these methodologies in fabricating cell-aligning interfaces and discuss their potential implications within the fields of biomaterials and tissue engineering, particularly concerning the pursuit of optimal cellular alignment.

Luminescent Hybrid BPA.DA-NVP@Eu2L3 Materials: In Situ Synthesis, Spectroscopic, Thermal, and Mechanical Characterization

A series of homogeneous hybrid BPA.DA-NVP@Eu2L3 materials were obtained through an in situ approach where the luminescent dopant was formed at the molecular level with different contents (0.1; 0.2; 0.5; 1; and 2% by weight). A Europium(III) complex (Eu2L3) with quinoline-2,4-dicarboxylic acid was applied as a luminescence additive while a polymer matrix consisted of a combination of bisphenol A diacrylate (BPA.DA) and N-vinylpyrrolidone (NVP) monomers. Synthesis steps and the final materials were monitored by NMR and Fourier transform infrared spectroscopy (FTIR). The emission, excitation spectra, lifetime, and quantum yield measurements were applied for the determination of the photophysical characteristics. The thermal and mechanical properties of the obtained materials were tested via thermal analysis methods (TG/DTG/DSC and TG-FTIR) in air and nitrogen atmospheres, dynamic mechanical analysis (DMA), and hardness and bending measurements. Generally, even a small addition of the metal complex component causes changes in the thermal, mechanical, and luminescent properties. Hybrid materials with a greater europium complex content are characterized by a lower stiffness and hardness while the heterogeneity and the flexibility of the samples increase. A very small amount of an Eu2L3 admixture (0.1% wt.) in a hybrid material causes an emission in the red spectral range and the luminescence intensity was reached for the BPA-DA-NVP@1%Eu2L3 material. These materials may be potentially used in chemical sensing, security systems, and protective coatings against UV.

Novel Double Hybrid-Type Bone Cements Based on Calcium Phosphates, Chitosan and Citrus Pectin

In this work, the influence of the liquid phase composition on the physicochemical properties of double hybrid-type bone substitutes was investigated. The solid phase of obtained biomicroconcretes was composed of highly reactive α-tricalcium phosphate powder (α-TCP) and hybrid hydroxyapatite/chitosan granules (HA/CTS). Various combinations of disodium phosphate (Na2HPO4) solution and citrus pectin gel were used as liquid phases. The novelty of this study is the development of double-hybrid materials with a dual setting system. The double hybrid phenomenon is due to the interactions between polycationic polymer (chitosan in hybrid granules) and polyanionic polymer (citrus pectin). The chemical and phase composition (FTIR, XRD), setting times (Gillmore needles), injectability, mechanical strength, microstructure (SEM) and chemical stability in vitro were studied. The setting times of obtained materials ranged from 4.5 to 30.5 min for initial and from 7.5 to 55.5 min for final setting times. The compressive strength varied from 5.75 to 13.24 MPa. By incorporating citrus pectin into the liquid phase of the materials, not only did it enhance their physicochemical properties, but it also resulted in the development of fully injectable materials featuring a dual setting system. It has been shown that the properties of materials can be controlled by using the appropriate ratio of citrus pectin in the liquid phase.

Quantum dot (Aun/Agn, n = 3-8) capped single lipids: interactions and physicochemical properties

Realizing the potential of nano-hybrid biomaterials in various applications (nanoprobes to drug delivery), special attention has been devoted towards their synthesis and development. Nonetheless, several questions pertaining to the interface chemistry between the constituent entities (biomolecules and organic/inorganic part) of these hybrids, still remain unresolved. Keeping these unsolved issues in mind, the present theoretical investigation focuses on determining the electronic/physicochemical properties and interactions within gold and silver quantum dot-capped single lipid molecules. Quantum dots of varying sizes and shapes have been chosen and then coupled with lipid molecules (1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC), 1,2-dimyristoyl-sn-glycero-3-phosphoethanolamine (DMPE), 1,2-dimyristoyl-sn-glycero-3-phosphoglycerol, sodium salt (DMPG)), at the choline/glycerol, carboxylate and phosphate site. It has been identified that Au Qds interact strongly as compared to Ag clusters. In addition to the type, the shape and size of the Qd also influences their attachment with lipids. Among various sites, the phosphate site provides a considerably stronger platform for the coupling of Qds. On the other hand, attachment at the choline site leads to significantly lower interaction energies. The trend noted in interaction energies coincides with the structure-electronic property analysis (interatomic bond distances, charge transfer, PO2- stretching frequencies), which further helps in deducing the nature of interactions. The molecular dynamics simulations performed on selected Qd-lipid complexes established that the Qd interacting with lipids at the phosphate site remains fairly stable at room temperature without undergoing fragmentation into individual components. On the other hand, at the choline site, the Qd-to-lipid coupling is unstable and therefore they experience disintegration at 300 K temperature. Additionally, a unique glycerol-to-phosphate site crossover is evidenced, which reaffirms that the phosphate site is selectively preferred by Qds for binding with lipid molecules.

Green and Red Photoluminescent Manganese Bromides with Aminomethylpyridine Isomers

Two positional isomers, 4-amino-3-methylpyridine and 3-amino-5-methylpyridine, produce 4-amino-3-methylpyridinium and 5-methylpyridin-3-aminium, respectively, under acidic conditions. The two protonated isomers create different hydrogen bonding networks, resulting in different coordination environments of the [MnX₄]^2- unit embedded in molecular compounds such as 4-amino-3-methylpyridinium manganese bromide, [(C₆H₉N₂)₂MnBr₄] and 5-methylpyridin-3-aminium manganese bromide, [(C₆H₉N₂)₄MnBr₄(H₂O)·(MnBr₄)]. Both compounds can be prepared using the slow evaporation method or mechanochemical synthetic procedures. Single-crystal structure analysis of [(C₆H₉N₂)₂MnBr₄] and [(C₆H₉N₂)₄MnBr₄(H₂O)·(MnBr₄)] revealed different manganese halide units, including tetrahedral and tetrahedral with distorted trigonal bipyramidal structures, which emit photoluminescence in the green (527 nm) and red (607 nm) regions, respectively. Electronic structure calculations were conducted to support the validity and interpretation of the UV-vis and photoluminescence (PL) spectral data. Thin films deposited using the [(C₆H₉N₂)₂MnBr₄] precursor also exhibit PL properties. The diverse pseudo-three-dimensional networks can be constructed by using positional isomers with different hydrogen bonding pathways and π-π stacking of organic units, in which the design strategy successfully enables the tuning of various optical properties.

Three-dimensional organization of pyrrolo[3,2-b]pyrrole-based triazine framework using nanostructural spherical carbon: enhancing electrochemical performance of materials for supercapacitors

Covalent triazine-based frameworks have attracted much interest recently due to their high surface area and excellent thermal and electrochemical stabilities. This study shows that covalently immobilizing triazine-based structures on spherical carbon nanostructures results in the organization of micro- and mesopores in a three-dimensional manner. We selected the nitrile-functionalized pyrrolo[3,2-b]pyrrole unit to form triazine rings to construct a covalent organic framework. Combining spherical carbon nanostructures with the triazine framework produced a material with unique physicochemical properties, exhibiting the highest specific capacitance value of 638 F g^-1 in aqueous acidic solutions. This phenomenon is attributed to many factors. The material exhibits a large surface area, a high content of micropores, a high content of graphitic N, and N-sites with basicity and semi-crystalline character. Thanks to the high structural organization and reproducibility, and remarkably high specific capacitance, these systems are promising materials for use in electrochemistry. For the first time, hybrid systems containing triazine-based frameworks and carbon nano-onions were used as electrodes for supercapacitors.

Multifunctional Platform for Covalent Titanium Coatings: Micro-FTIR, XPS, and NEXAFS Characterizations

This work aims at preparing and characterizing a versatile multifunctional platform enabling the immobilization of macromolecules on a titanium surface by robust covalent grafting. Functionalized titanium is widely used in the biomedical field to improve its properties. Despite its high biocompatibility and osteointegrability, titanium implants are not very stable in the long term due to the onset of inflammation and bacterial infections. The proposed method allows the superficial insertion of three different organic linkers to be used as anchors for the attachment of biopolymers or bioactive molecules. This strategy used green solvents and is a good alternative to the proposed classic methods that employ organic solvents. The uniformly modified surfaces were characterized by micro-Fourier transform infrared spectroscopy (micro-FTIR), X-ray Photoelectron spectroscopy (XPS) and Near-Edge X-ray Absorption Fine Structure (NEXAFS). The latter made it possible to assess the orientation of the linker molecules with respect to the titanium surface. To test the efficiency of the linkers, two polymers (alginate and 2-(dimethylamino)-ethyl methacrylate (PDMAEMA)), with the potential ability to increase biocompatibility, were covalently attached to the titanium surfaces. The obtained results are a good starting point for the realization of stable polymeric coatings permanently bonded to the surface that could be used to extend the life of biomedical implants.

Macrocyclic Compounds: Metal Oxide Particles Nanocomposite Thin Films Deposited by MAPLE

Nanocomposite films based on macrocyclic compounds (zinc phthalocyanine (ZnPc) and 5,10,15,20-tetra(4-pyridyl) 21H,23H-porphyrin (TPyP)) and metal oxide nanoparticles (ZnO or CuO) were deposited by matrix-assisted pulsed laser evaporation (MAPLE). 1,4-dioxane was used as a solvent in the preparation of MAPLE targets that favor the deposition of films with a low roughness, which is a key feature for their integration in structures for optoelectronic applications. The influence of the addition of ZnO nanoparticles (~20 nm in size) or CuO nanoparticles (~5 nm in size) in the ZnPc:TPyP mixture and the impact of the added metal oxide amount on the properties of the obtained composite films were evaluated in comparison to a reference layer based only on an organic blend. Thus, in the case of nanocomposite films, the vibrational fingerprints of both organic compounds were identified in the infrared spectra, their specific strong absorption bands were observed in the UV-Vis spectra, and a quenching of the TPyP emission band was visible in the photoluminescence spectra. The morphological analysis evidenced agglomerated particles on the composite film surface, but their presence has no significant impact on the roughness of the MAPLE deposited layers. The current density-voltage (J-V) characteristics of the structures based on the nanocomposite films deposited by MAPLE revealed the critical role played by the layer composition and component ratio, an improvement in the electrical parameters values being achieved only for the films with a certain type and optimum amount of metal oxide nanoparticles.

3D-Printed Microinjection Needle Arrays via a Hybrid DLP-Direct Laser Writing Strategy

Microinjection protocols are ubiquitous throughout biomedical fields, with hollow microneedle arrays (MNAs) offering distinctive benefits in both research and clinical settings. Unfortunately, manufacturing-associated barriers remain a critical impediment to emerging applications that demand high-density arrays of hollow, high-aspect-ratio microneedles. To address such challenges, here, a hybrid additive manufacturing approach that combines digital light processing (DLP) 3D printing with "ex situ direct laser writing (esDLW)" is presented to enable new classes of MNAs for fluidic microinjections. Experimental results for esDLW-based 3D printing of arrays of high-aspect-ratio microneedles-with 30 μm inner diameters, 50 μm outer diameters, and 550 μm heights, and arrayed with 100 μm needle-to-needle spacing-directly onto DLP-printed capillaries reveal uncompromised fluidic integrity at the MNA-capillary interface during microfluidic cyclic burst-pressure testing for input pressures in excess of 250 kPa (n = 100 cycles). Ex vivo experiments perform using excised mouse brains reveal that the MNAs not only physically withstand penetration into and retraction from brain tissue but also yield effective and distributed microinjection of surrogate fluids and nanoparticle suspensions directly into the brains. In combination, the results suggest that the presented strategy for fabricating high-aspect-ratio, high-density, hollow MNAs could hold unique promise for biomedical microinjection applications.

Cell Behavior Changes and Enzymatic Biodegradation of Hybrid Electrospun Poly(3-hydroxybutyrate)-Based Scaffolds with an Enhanced Piezoresponse after the Addition of Reduced Graphene Oxide

This is the first comprehensive study of the impact of biodegradation on the structure, surface potential, mechanical and piezoelectric properties of poly(3-hydroxybutyrate) (PHB) scaffolds supplemented with reduced graphene oxide (rGO) as well as cell behavior under static and dynamic mechanical conditions. There is no effect of the rGO addition up to 1.0 wt% on the rate of enzymatic biodegradation of PHB scaffolds for 30 d. The biodegradation of scaffolds leads to the depolymerization of the amorphous phase, resulting in an increase in the degree of crystallinity. Because of more regular dipole order in the crystalline phase, surface potential of all fibers increases after the biodegradation, with a maximum (361 ± 5 mV) after the addition of 1 wt% rGO into PHB as compared to pristine PHB fibers. By contrast, PHB-0.7rGO fibers manifest the strongest effective vertical (0.59 ± 0.03 pm V^-1 ) and lateral (1.06 ± 0.02 pm V^-1 ) piezoresponse owing to a greater presence of electroactive β-phase. In vitro assays involving primary human fibroblasts reveal equal biocompatibility and faster cell proliferation on PHB-0.7rGO scaffolds compared to pure PHB and nonpiezoelectric polycaprolactone scaffolds. Thus, the developed biodegradable PHB-rGO scaffolds with enhanced piezoresponse are promising for tissue-engineering applications.

Hierarchy of hybrid materials. Part-II: The place of organics-on-inorganics in it, their composition and applications

Hybrid materials or hybrids incorporating organic and inorganic constituents are emerging as a very potent and promising class of materials due to the diverse but complementary nature of their properties. This complementarity leads to a perfect synergy of properties of the desired materials and products as well as to an extensive range of their application areas. Recently, we have overviewed and classified hybrid materials describing inorganics-in-organics in Part-I (Saveleva, et al., Front. Chem., 2019, 7, 179). Here, we extend that work in Part-II describing organics-on-inorganics, i.e., inorganic materials modified by organic moieties, their structure and functionalities. Inorganic constituents comprise of colloids/nanoparticles and flat surfaces/matrices comprise of metallic (noble metal, metal oxide, metal-organic framework, magnetic nanoparticles, alloy) and non-metallic (minerals, clays, carbons, and ceramics) materials; while organic additives can include molecules (polymers, fluorescence dyes, surfactants), biomolecules (proteins, carbohydtrates, antibodies and nucleic acids) and even higher-level organisms such as cells, bacteria, and microorganisms. Similarly to what was described in Part-I, we look at similar and dissimilar properties of organic-inorganic materials summarizing those bringing complementarity and composition. A broad range of applications of these hybrid materials is also presented whose development is spurred by engaging different scientific research communities.

A decade of developing applications exploiting the properties of polyelectrolyte multilayer capsules

Transferring the layer-by-layer (LbL) coating approach from planar surfaces to spherical templates and subsequently dissolving these templates leads to the fabrication of polyelectrolyte multilayer capsules. The versatility of the coatings of capsules and their flexibility upon bringing in virtually any material into the coatings has quickly drawn substantial attention. Here, we provide an overview of the main developments in this field, highlighting the trends in the last decade. In the beginning, various methods of encapsulation and release are discussed followed by a broad range of applications, which were developed and explored. We also outline the current trends, where the range of applications is continuing to grow, including addition of whole new and different application areas.

Entrapment and Voltage-Driven Reorganization of Hydrophobic Nanoparticles in Planar Phospholipid Bilayers

Engineered nanoparticles (NPs) possess diverse physical and chemical properties, which make them attractive agents for targeted cellular interactions within the human body. Once affiliated with the plasma membrane, NPs can become embedded within its hydrophobic core, which can limit the intended therapeutic functionality and affect the associated toxicity. As such, understanding the physical effects of embedded NPs on a plasma membrane is critical to understanding their design and clinical use. Here, we demonstrate that functionalized, hydrophobic gold NPs dissolved in oil can be directly trapped within the hydrophobic interior of a phospholipid membrane assembled using the droplet interface bilayer technique. This approach to model membrane formation preserves lateral lipid diffusion found in cell membranes and permits simultaneous imaging and electrophysiology to study the effects of embedded NPs on the electromechanical properties of the bilayer. We show that trapped NPs enhance ion conductance and lateral membrane tension in 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) and 1,2-diphytanoyl-sn-glycero-3-phosphocholine (DPhPC) bilayers while lowering the adhesive energy of the joined droplets. Embedded NPs also cause changes in bilayer capacitance and area in response to applied voltage, which are nonmonotonic for DOPC bilayers. This electrophysical characterization can reveal NP entrapment without relying on changes in membrane thickness. By evaluating the energetic components of membrane tension under an applied potential, we demonstrate that these nonmonotonic, voltage-dependent responses are caused by reversible clustering of NPs within the unsaturated DOPC membrane core; aggregates form spontaneously at low voltages and are dispersed by higher transmembrane potentials of magnitude similar to those found in the cellular environment. These findings allow for a better understanding of lipid-dependent NP interactions, while providing a platform to study relationships between other hydrophobic nanomaterials and organic membranes.

Nanoarchitectonics beyond perfect order - not quite perfect but quite useful

Nanoarchitectonics, like architectonics, allows the design and building of structures, but at the nanoscale. Unlike those in architectonics, and even macro-, micro-, and atomic-scale architectonics, the assembled structures at the nanoscale do not always follow the projected design. In fact, they do follow the projected design but only for self-assembly processes producing structures with perfect order. Here, we look at nanoarchitectonics allowing the building of nanostructures without a perfect arrangement of building blocks. Here, fabrication of structures from molecules, polymers, nanoparticles, and nanosheets to polymer brushes, layer-by-layer assembly structures, and hydrogels through self-assembly processes is discussed, where perfect order is not necessarily the aim to be achieved. Both planar substrate and spherical template-based assemblies are discussed, showing the challenging nature of research in this field and the usefulness of such structures for numerous applications, which are also discussed here.

Microstructured Magnetoactive Elastomers for Switchable Wettability

We demonstrate the control of wettability of non-structured and microstructured magnetoactive elastomers (MAEs) by magnetic field. The synthesized composite materials have a concentration of carbonyl iron particles of 75 wt.% (≈27 vol.%) and three different stiffnesses of the elastomer matrix. A new method of fabrication of MAE coatings on plastic substrates is presented, which allows one to enhance the response of the apparent contact angle to the magnetic field by exposing the particle-enriched side of MAEs to water. A magnetic field is not applied during crosslinking. The highest variation of the contact angle from (113 ± 1)° in zero field up to (156 ± 2)° at about 400 mT is achieved in the MAE sample with the softest matrix. Several lamellar and pillared MAE structures are fabricated by laser micromachining. The lateral dimension of surface structures is about 50 µm and the depth varies between 3 µm and 60 µm. A systematic investigation of the effects of parameters of laser processing (laser power and the number of passages of the laser beam) on the wetting behavior of these structures in the absence and presence of a magnetic field is performed. In particular, strong anisotropy of the wetting behavior of lamellar structures is observed. The results are qualitatively discussed in the framework of the Wenzel and Cassie–Baxter models. Finally, directions of further research on magnetically controlled wettability of microstructured MAE surfaces are outlined. The obtained results may be useful for the development of magnetically controlled smart surfaces for droplet-based microfluidics.

A Facile One-Pot Approach to the Fabrication of Nanocellulose-Titanium Dioxide Nanocomposites with Promising Photocatalytic and Antimicrobial Activity

The combination of cellulosic materials and metal oxide semiconductors can provide composites with superior functional properties compared to cellulose. By using nanocellulose derived from agricultural waste, we propose a one-pot and environmentally friendly approach to the synthesis of nanocellulose-TiO₂ (NC-TiO₂) nanocomposites with peculiar photocatalytic activity and antibacterial effects. The as-prepared NC-TiO₂ composites were fully characterized by different techniques, such as X-ray diffraction (XRD), μ-Raman, Fourier transform infrared spectroscopy (FTIR), thermogravimetry analysis (TGA), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and diffuse reflectance spectroscopy (DRS). The results showed that well crystalline anatase TiO₂ nanoparticles of about 5-6 nm were obtained. The photocatalytic activity in particular was evaluated by using methyl orange (MO) solution as a target pollutant at different pH values. It was found that all the tested NC-TiO₂ nanocomposites showed stable photocatalytic activity, even after consecutive photocatalytic runs. In addition, NCT nanocomposites with higher TiO₂ content showed degradation efficiency of almost 99% towards MO after 180 min of UV illumination. Finally, NC-TiO₂ nanocomposites also showed intriguing antimicrobial properties, demonstrating to be effective against Gram-positive (Staphylococcus aureus, Bacillus subtilis) with 20-25 mm of inhibition zone and Gram-negative bacteria (Escherichia coli, Pseudomonas aeuroginosa) with 21-24 mm of inhibition zone, and fungi (Candida albicans) with 9-10 mm of inhibition zone.

Ag–Se/Nylon Nanocomposites Grown by Template-Engaged Reaction: Microstructures, Composition, and Optical Properties

Ag–Se nanostructure films were deposited on a–Se/nylon templates by a template-engaged reaction. Firstly, amorphous selenium (a–Se) was deposited on nylon by employing the chemical bath deposition method while using H2SeO3 and Na2SO3 solutions with an increasing selenium deposition time. Then, these a–Se/nylon templates were exposed into AgNO3 solution at ambient temperature and pressure. The Ag–Se/nylon nanocomposites surface morphology, elemental and phase composition, and optical properties were monitored depending on the selenium deposition time on nylon. Scanning electron microscopy (SEM) analysis confirmed the development of a very complex surface composed of pyramidal-like sub-micron structures, agglomerates, and grid-like structures. Energy dispersive spectroscopy (EDS) proved the presence of carbon, oxygen, nitrogen, selenium, and silver. SEM/EDS cross-sectional analysis confirmed the multilayer character with different individual elemental composition in each film layer. X-ray diffraction analysis revealed a polycrystalline Ag2Se phase with or without metallic Ag. The RMS value obtained from atomic force microscopy varies from 25.82 nm to 57.04 nm. From the UV-Vis spectrophotometry, the direct optical band gaps were found to be 1.68–1.86 eV. Ag–Se/nylon composites exhibit high refractive indices in the near infrared region.

Recent advances on structural, thermal, vibrational, optical, phase transitions, and catalysis properties of alkylenediammonium halogenometallate materials (Metal: Bi, Sb, Halogen: Cl, Br, I)

This paper aims to review recent advances on synthesis, crystal structures, thermal, spectroscopic, phase transitions, optical, dielectric, and catalysis properties of hydrate and anhydrous alkylenediammonium halogenometallates materials (Metal: Bi, Sb, Halogen: Cl, Br, I). These hybrid materials present rich structural diversities based on octahedra forming infinite zero dimensional, 1-dimensional chains, 2-dimensional layers, discrete bioctahedra, and discrete tetramer units. The effect, contribution and importance of hydrogen bonding N–H … X (X: Cl, Br, I) are reviewed in terms of solid state relationship. Particularly, a comparative study is made on hydrate and anyhdrous aliphatic chlorobismuthates with alkylenediammonium +NH3(CH2) n NH3 + based on structural data and V/Z variation with (CH2) n chains (n = 2–8, 12), and variation of BiCl6 3− Raman frequencies modes versus (CH2) n chains (n = 3–8). Hydrate salts with (n = 3, 12) consist of isolated BiCl6 3− anions and two water molecules, against others ones with isolated anionic chains [BiCl5 2−] n or Bi2Cl10 4− dimers, formed by distorted octahedra BiCl6 3− sharing corners, vices or edges. The reviewed optical and electronic band gaps suggested interesting compounds with band gaps (1.85–2.4 eV), as suitable materials in optoelectronic properties, photoactive layer in solution-processed photovoltaics, and bio-imaging or photovoltaic applications. It was concluded that iodobismuthate salts have generally the lowest bands gap, compared to that of bromo and chlorobismuthate slats. Catalysis proprieties are reviewed n fast (RhB) degradation under dark conditions for (C4N2H7)4Bi2Cl10, (C5H9N2)BiI4, and {(H-BPA)4·[(BiI6)I13]·2I3} n , and in organic salts synthesis under solvent-free conditions. Herein NH3(CH2) n NH3BiCl5 (n = 5–7) salts were used as highly efficient catalysts, which is a novel tendency in chlorobismuthate researchs in the green chemistry field.

Immunogenic Cell Death and Role of Nanomaterials Serving as Therapeutic Vaccine for Personalized Cancer Immunotherapy

Immunogenic cell death (ICD) is a rapidly growing research area representing one of the emerging therapeutic strategies of cancer immunotherapy. ICD is an umbrella term covering several cell death modalities including apoptosis, necroptosis, ferroptosis and pyroptosis, and is the product of a balanced combination of adjuvanticity (damage-associated molecular patterns and chemokines/cytokines) and antigenicity (tumor associated antigens). Only a limited number of anti-cancer therapies are available to induce ICD in experimental cancer therapies and even much less is available for clinical use. To overcome this limitation, nanomaterials can be used to increase the immunogenicity of cancer cells killed by anti-cancer therapy, which in themselves are not necessarily immunogenic. In this review, we outline the current state of knowledge of ICD modalities and discuss achievements in using nanomaterials to increase the immunogenicity of dying cancer cells. The emerging trends in modulating the immunogenicity of dying cancer cells in experimental and translational cancer therapies and the challenges facing them are described. In conclusion, nanomaterials are expected to drive further progress in their use to increase efficacy of anti-cancer therapy based on ICD induction and in the future, it is necessary to validate these strategies in clinical settings, which will be a challenging research area.

Manipulation of the Thermochromic Transition Temperature in a Classic Metal-Organic Complex by Selective Anion Doping

The origin of thermochromism displayed by the hybrid material [Ni(dieten)₂](BF₄)₂ (dieten = N,N-diethylethylenediamine) is explored by anion substitution of the tetrafluoroborate anions (BF₄^-) with varying percentages (0-25%) of bromide (Br^-). Differential scanning calorimetry and variable-temperature diffuse reflectance spectroscopy indicate that the yellow-orange to orange-red thermochromic transition inherent to undoped [Ni(dieten)₂](BF₄)₂ shifts from 100 to 90 °C as the doping concentration increases from 0 to 25%. Similarly, a 15 nm line broadening of the Kubelka-Munk transformed diffuse reflectance signal (proportional to the absorbance of the complex) and a broadening of the endothermic transition are observed with increasing Br^- doping. The structure of the undoped [Ni(dieten)₂](BF₄)₂, determined by single-crystal X-ray diffraction, is presented, and powder X-ray diffraction was used to confirm that the crystal structure and crystallinity of each doped sample remains unchanged from the BF₄^- phase. We provide evidence for an underlying mechanism of thermochromism that is linked to hydrogen bonding within the crystal structure and which can be manipulated via targeted modulation of lattice anions. The mechanism proposed here is likely applicable to other materials within the family of dieten complexes ([M(dieten)₂](X)₂, where M = Ni²⁺, Cu²⁺ and X = BF₄^-, ClO₄^-, NO₃^-).

Impact of Nanoparticle Size and Surface Chemistry on Peptoid Self-Assembly

Self-assembled organic nanomaterials can be generated by bottom-up assembly pathways where the structure is controlled by the organic sequence and altered using pH, temperature, and solvation. In contrast, self-assembled structures based on inorganic nanoparticles typically rely on physical packing and drying effects to achieve uniform superlattices. By combining these two chemistries to access inorganic-organic nanostructures, we aim to understand the key factors that govern the assembly pathway and structural outcomes in hybrid systems. In this work, we outline two assembly regimes between quantum dots (QDs) and reversibly binding peptoids. These regimes can be accessed by changing the solubility and size of the hybrid (peptoid-QD) monomer unit. The hybrid monomers are prepared via ligand exchange and assembled, and the resulting assemblies are studied using ex-situ transmission electron microscopy as a function of assembly time. In aqueous conditions, QDs were found to stabilize certain morphologies of peptoid intermediates and generate a final product consisting of multilayers of small peptoid sheets linked by QDs. The QDs were also seen to facilitate or inhibit assembly in organic solvents based on the relative hydrophobicity of the surface ligands, which ultimately dictated the solubility of the hybrid monomer unit. Increasing the size of the QDs led to large hybrid sheets with regions of highly ordered square-packed QDs. A second, smaller QD species can also be integrated to create binary hybrid lattices. These results create a set of design principles for controlling the structure and structural evolution of hybrid peptoid-QD assemblies and contribute to the predictive synthesis of complex hybrid matter.

Hard, Soft, and Hard-and-Soft Drug Delivery Carriers Based on CaCO3 and Alginate Biomaterials: Synthesis, Properties, Pharmaceutical Applications

Because free therapeutic drug molecules often have adverse effects on normal tissues, deliver scanty drug concentrations and exhibit a potentially low efficacy at pathological sites, various drug carriers have been developed for preclinical and clinical trials. Their physicochemical and toxicological properties are the subject of extensive research. Inorganic calcium carbonate particles are promising candidates as drug delivery carriers owning to their hardness, porous internal structure, high surface area, distinctive pH-sensitivity, low degradability, etc, while soft organic alginate hydrogels are also widely used because of their special advantages such as a high hydration, bio-adhesiveness, and non-antigenicity. Here, we review these two distinct substances as well as hybrid structures encompassing both types of carriers. Methods of their synthesis, fundamental properties and mechanisms of formation, and their respective applications are described. Furthermore, we summarize and compare similarities versus differences taking into account unique advantages and disadvantages of these drug delivery carriers. Moreover, rational combination of both carrier types due to their performance complementarity (yin-&yang properties: in general, yin is referred to for definiteness as hard, and yang is broadly taken as soft) is proposed to be used in the so-called hybrid carriers endowing them with even more advanced properties envisioned to be attractive for designing new drug delivery systems.

Modification of Surfaces with Vaterite CaCO3 Particles

Former studies have demonstrated a strong interest toward the crystallization of CaCO3 polymorphs in solution. Nowadays, CaCO3 crystallization on solid surfaces is extensively being studied using biomolecules as substrates for the control of the growth aiming at various applications of CaCO3. Calcium carbonate exists in an amorphous state, as three anhydrous polymorphs (aragonite, calcite and vaterite), and as two hydrated polymorphs (monohydrocalcite and ikaite). The vaterite polymorph is considered as one of the most attractive forms due to its large surface area, biocompatibility, mesoporous nature, and other features. Based on physical or chemical immobilization approaches, vaterite can be grown directly on solid surfaces using various (bio)molecules, including synthetic polymers, biomacromolecules such as proteins and peptides, carbohydrates, fibers, extracellular matrix components, and even biological cells such as bacteria. Herein, the progress on the modification of solid surfaces by vaterite CaCO3 crystals is reviewed, focusing on main findings and the mechanism of vaterite growth initiated by various substances mentioned above, as well as the discussion of the applications of such modified surfaces.

Polysaccharides and Metal Nanoparticles for Functional Textiles: A Review

Nanotechnology is a powerful tool for engineering functional materials that has the potential to transform textiles into high-performance, value-added products. In recent years, there has been considerable interest in the development of functional textiles using metal nanoparticles (MNPs). The incorporation of MNPs in textiles allows for the obtention of multifunctional properties, such as ultraviolet (UV) protection, self-cleaning, and electrical conductivity, as well as antimicrobial, antistatic, antiwrinkle, and flame retardant properties, without compromising the inherent characteristics of the textile. Environmental sustainability is also one of the main motivations in development and innovation in the textile industry. Thus, the synthesis of MNPs using ecofriendly sources, such as polysaccharides, is of high importance. The main functions of polysaccharides in these processes are the reduction and stabilization of MNPs, as well as the adhesion of MNPs onto fabrics. This review covers the major research attempts to obtain textiles with different functional properties using polysaccharides and MNPs. The main polysaccharides reported include chitosan, alginate, starch, cyclodextrins, and cellulose, with silver, zinc, copper, and titanium being the most explored MNPs. The potential applications of these functionalized textiles are also reported, and they include healthcare (wound dressing, drug release), protection (antimicrobial activity, UV protection, flame retardant), and environmental remediation (catalysts).

A Review on the Design of Hydrogels With Different Stiffness and Their Effects on Tissue Repair

Tissue repair after trauma and infection has always been a difficult problem in regenerative medicine. Hydrogels have become one of the most important scaffolds for tissue engineering due to their biocompatibility, biodegradability and water solubility. Especially, the stiffness of hydrogels is a key factor, which influence the morphology of mesenchymal stem cells (MSCs) and their differentiation. The researches on this point are meaningful to the field of tissue engineering. Herein, this review focus on the design of hydrogels with different stiffness and their effects on the behavior of MSCs. In addition, the effect of hydrogel stiffness on the phenotype of macrophages is introduced, and then the relationship between the phenotype changes of macrophages on inflammatory response and tissue repair is discussed. Finally, the future application of hydrogels with a certain stiffness in regenerative medicine and tissue engineering has been prospected.

Double hydrophilic copolymers - synthetic approaches, architectural variety, and current application fields

Solubility and functionality of polymeric materials are essential properties determining their role in any application. In that regard, double hydrophilic copolymers (DHC) are typically constructed from two chemically dissimilar but water-soluble building blocks. During the past decades, these materials have been intensely developed and utilised as, e.g., matrices for the design of multifunctional hybrid materials, in drug carriers and gene delivery, as nanoreactors, or as sensors. This is predominantly due to almost unlimited possibilities to precisely tune DHC composition and topology, their solution behavior, e.g., stimuli-response, and potential interactions with small molecules, ions and (nanoparticle) surfaces. In this contribution we want to highlight that this class of polymers has experienced tremendous progress regarding synthesis, architectural variety, and the possibility to combine response to different stimuli within one material. Especially the implementation of DHCs as versatile building blocks in hybrid materials expanded the range of water-based applications during the last two decades, which now includes also photocatalysis, sensing, and 3D inkjet printing of hydrogels, definitely going beyond already well-established utilisation in biomedicine or as templates.

An injectable gellan gum-based hydrogel that inhibits Staphylococcus aureus for infected bone defect repair

The treatment of infected bone defects in complex anatomical structures, such as oral and maxillofacial structures, remains an intractable clinical challenge. Therefore, advanced biomaterials that have excellent anti-infection activity and allow convenient delivery are needed. We fabricated an innovative injectable gellan gum (GG)-based hydrogel loaded with nanohydroxyapatite particles and chlorhexidine (nHA/CHX). The hydrogel has a porous morphology, suitable swelling ratio, and good biocompatibility. It exerts strong antibacterial activity against Staphylococcus aureus growth and biofilm formation in vitro. We successfully established an infected calvarial defect rat model. Bacterial colony numbers were significantly lower in tissues surrounding the bone in rats of the GG/nHA/CHX group after debride surgery and hydrogel implantation in the defect regions than in rats of the blank group. Rats in the GG/nHA/CHX group exhibited significantly increased new bone formation compared to those in the blank group at 4 and 8 weeks. These findings indicate that gellan gum-based hydrogel with nHA/CHX can accelerate the repair of infected bone defects.