Principles of encapsulating hydrophobic drugs in PLA/PLGA microparticles

Microencapsulation for the Therapeutic Delivery of Drugs, Live Mammalian and Bacterial Cells, and Other Biopharmaceutics: Current Status and Future Directions

Microencapsulation is a technology that has shown significant promise in biotherapeutics, and other applications. It has been proven useful in the immobilization of drugs, live mammalian and bacterial cells and other cells, and other biopharmaceutics molecules, as it can provide material structuration, protection of the enclosed product, and controlled release of the encapsulated contents, all of which can ensure efficient and safe therapeutic effects. This paper is a comprehensive review of microencapsulation and its latest developments in the field. It provides a comprehensive overview of the technology and primary goals of microencapsulation and discusses various processes and techniques involved in microencapsulation including physical, chemical, physicochemical, and other methods involved. It also summarizes the state-of-the-art successes of microencapsulation, specifically with regard to the encapsulation of microorganisms, mammalian cells, drugs, and other biopharmaceutics in various diseases. The limitations and future directions of microencapsulation technologies are also discussed.

Application of near-infrared dyes for tumor imaging, photothermal, and photodynamic therapies

Near-infrared (NIR) dyes, small organic molecules that function in the NIR region, have received increasing attention in recent years as diagnostic and therapeutic agents in the field of tumor research. They have been demonstrated great successes in imaging and treating tumors both in vitro and in vivo. And their different applications in clinical practices have made rapid gains. This review primarily focuses on the progress of the application of NIR dyes in tumor imaging and therapy. In particular, advances in the use of different NIR dyes in tumor-specific imaging, photothermal, and photodynamic therapies are discussed. Limitations and prospects associated with NIR dyes in diagnostic and therapeutic application are also reviewed.

Self-healing microencapsulation of biomacromolecules without organic solvents

Microencapsulation of biomacromolecules in PLGA is routinely performed with organic solvent through multiple complex steps deleterious to the biomacromolecule. The new self-healing based PLGA microencapsulation obviates micronization- and organic solvent-induced protein damage, provides very high encapsulation efficiency, exhibit stabilization and slow release of labile tetanus protein antigen, and provides long-term testosterone suppression in rats following a single injection of encapsulated leuprolide.

A retrospective mathematical analysis of controlled release design and experimentation

The development and performance evaluation of new biodegradable polymer controlled release formulations relies on successful interpretation and evaluation of in vitro release data. However, depending upon the extent of empirical characterization, release data may be open to more than one qualitative interpretation. In this work, a predictive model for release from degradable polymer matrices was applied to a number of published release data in order to extend the characterization of release behavior. Where possible, the model was also used to interpolate and extrapolate upon collected released data to clarify the overall duration of release and also kinetics of release between widely spaced data points. In each case examined, mathematical predictions of release coincide well with experimental results, offering a more definitive description of each formulation's performance than was previously available. This information may prove particularly helpful in the design of future studies, such as when calculating proper dosing levels or determining experimental end points in order to more comprehensively evaluate a controlled release system's performance.

Combination delivery of TGF-β inhibitor and IL-2 by nanoscale liposomal polymeric gels enhances tumour immunotherapy

The tumour microenvironment thwarts conventional immunotherapy through multiple immunologic mechanisms, such as the secretion of the transforming growth factor-β (TGF-β), which stunts local tumour immune responses. Therefore, high doses of interleukin-2 (IL-2), a conventional cytokine for metastatic melanoma, induces only limited responses. To overcome the immunoinhibitory nature of the tumour microenvironment, we developed nanoscale liposomal polymeric gels (nanolipogels; nLGs) of drug-complexed cyclodextrins and cytokine-encapsulating biodegradable polymers that can deliver small hydrophobic molecular inhibitors and water-soluble protein cytokines in a sustained fashion to the tumour microenvironment. nLGs releasing TGF-β inhibitor and IL-2 significantly delayed tumour growth, increased survival of tumour-bearing mice, and increased the activity of natural killer cells and of intratumoral-activated CD8(+) T-cell infiltration. We demonstrate that the efficacy of nLGs in tumour immunotherapy results from a crucial mechanism involving activation of both innate and adaptive immune responses.

Surface functionalization of nanoparticles to control cell interactions and drug release

Nanoparticles made from poly(dl-lactide-co-glycolide) (PLGA) are used to deliver a wide range of bioactive molecules, due to their biocompatibility and biodegradability. This study investigates the surface modification of PLGA nanoparticles via the layer-by-layer (LbL) deposition of polyelectrolytes, and the effects of these coatings on the release behavior, cytotoxicity, hemolytic activity, and cellular uptake efficiency. PLGA nanoparticles are modified via LbL adsorption of two polyelectrolyte pairs: 1) poly(allylamine hydrochloride) (PAH) and poly(styrene sulfonate) (PSS) and 2) poly(L-lysine hydrobromide) (PLL) and dextran sulfate (DES). It is demonstrated that both PAH/PSS and PLL/DES coatings suppress the burst release usually observed for unmodified PLGA nanoparticles and that the release behavior can be adjusted by changing the layer numbers, layer materials, or by crosslinking the layer constituents. Neither bare nor polyelectrolyte-modified PLGA nanoparticles show any signs of cytotoxicity. However, nanoparticles with a positively charged polyelectrolyte as the outermost layer induce hemolysis, whereas uncoated particles or particles with a negatively charged polyelectrolyte as the outermost layer show no hemolytic activity. Furthermore, particles with either PAH or PLL as the outermost layer also demonstrate a higher uptake efficiency by L929 fibroblast cells, due to a higher cell-particle affinity. This study suggests that LbL coating of PLGA nanoparticles can control the release behavior of bioactive molecules as well as the surface activity, therefore providing a promising strategy to enhance the efficiency of nanoparticulate drug-delivery systems.

Sustained-release G-CSF microspheres using a novel solid-in-oil-in-oil-in-water emulsion method

Background

The main treatments for cancers are still chemotherapy and radiotherapy for intermediate-stage cancer and terminal cancer. However, the therapeutic methods often result in a decreased neutrophilic granulocyte count and other side effects. In this study, in order to improve the neutrophilic granulocyte levels in the blood after radiotherapy and chemotherapy, we developed a sustained-release granulocyte colony–stimulating factor (G-CSF) microsphere formulation using a novel solid-in-oil-in-oil-in-water (S/O/O/W) emulsification method.

Methods

G-CSF was loaded into dextran nanoparticles by freezing-induced phase separation, and then the G-CSF–loaded nanoparticles were encapsulated into sustained-release poly(lactic-co- glycolic acid) microspheres using S/O/O/W emulsification. The control microspheres were also prepared through W/O/W emulsification. The performance of the two microsphere formulations was investigated both in vitro and in vivo.

Results

The microspheres for the controlled release of G-CSF in a zero-order or near-zero-order pattern were provided for 2 weeks. The in vitro cumulative G-CSF release kept over 90% of its bioactivity, which was proved by a NFS-60 cell line growth assay. The microspheres of the control group fabricated by W/O/W emulsification maintained less then half of its bioactivity. The in vivo efficacy of microspheres made using the S/O/O/W method was higher than those using the W/O/W method.

Conclusion

These results suggested that the microspheres prepared by the S/O/O/W method had increased neutrophil activity compared to those prepared by W/O/W.

Long-acting formulation of a new muscarinic receptor antagonist for the treatment of overactive bladder

A new muscarinic receptor antagonist, 5-hydroxymethyl tolterodine (5-HMT), was successfully encapsulated into PLGA microspheres. With an increase of PLGA concentration from 15% to 40%, encapsulation efficiency of 5-HMT increased from 55.39% to 76.32%, and the particle size of microsphere increased from 34.33 to 70.48 µm. Increasing the homogenisation speed from 850 to 2300 rpm, the particle size was reduced about 65%.The in vitro and in vivo studies in beagle dogs show that the release profile of 5-HMT-loaded microspheres (5-HMT MS) prepared with 503H is characterised by a low initial burst followed by slow release that lasted for 2 weeks. A C(max) of 1.617 ± 0.392 ng/mL was found on the sixth day. When evaluated for inhibition of the carbachol-induced contraction of rat urinary bladder, 5-HMT MS showed a much longer and more potent effect than tolterodine tablets. The mean urination time of the rats in the 5-HMT MS group was significantly decreased (p < 0.05 or p < 0.01) to less than 2 weeks.

Thermosensitive nanoparticles with pH-triggered degradation and release of anti-inflammatory cell-penetrating peptides

Poly(N-isopropylacrylamide-2-acrylamido-2-methyl-1-propanesulfonate) [poly(NIPAm-AMPS)] nanoparticles can be cross-linked with hydrolytically degradable N,O-dimethacryloyl hydroxylamine (DMHA) in order to yield a pH-sensitive drug delivery system that slowly erodes above pH 5.0. Varying the composition of degradable DMHA and nondegradable MBA cross-linking allows for engineered variation of particle size and degradation kinetics. Utilizing sulfated comonomer AMPS provides for increased passive loading of anti-inflammatory mitogen-activated protein kinase-activated protein kinase 2 (MK2)-inhibiting cell-penetrating peptide KAFAKLAARLYRKALARQLGVAA (KAFAK) between 24.3% and 29.2% (w/w) for nanoparticles with 5 mol % cross-linker. Nanoparticles were shown to be nontoxic in vitro and were effective at delivering a therapeutically active dose of KAFAK to THP1 human monocytes to suppress tumor necrosis factor α (TNF-α) expression during lipopolysaccharide (LPS)-induced inflammation. This thermosensitive nanoparticle system is an excellent platform for passive diffusive loading in deionized water and release in physiologically relevant ionic strength media of environmentally sensitive peptide therapeutics.

Beyond the imaging: limitations of cellular uptake study in the evaluation of nanoparticles

Poly(lactic-co-glycolic acid) (PLGA) nanoparticles (NPs) conjugated to a cell-penetrating peptide, TAT, was used to increase intracellular delivery of paclitaxel (PTX) to multi-drug resistant (MDR) cells. Efficient cellular uptake of the TAT-conjugated PLGA NPs was observed; however, it did not translate to increased killing of MDR cells. An investigation of drug release kinetics in phosphate-buffered saline containing Tween 80 led us to suspect that a significant fraction of the loaded PTX was released before efficient cellular uptake could occur. These results indicate that the increased cellular uptake of NPs does not always mean an enhanced drug effect and that it is critical to control both the location of NPs and the drug release from NPs together. Based on this study, we propose that two prevalent practices in NP research be reconsidered: first, the utility of a new NP system should be tested beyond the imaging level. Second, NP release kinetics should be monitored in a medium that can reflect the complexity of biological environment rather than a simple buffered saline.

PHEA-graft-polybutylmethacrylate copolymer microparticles for delivery of hydrophobic drugs

Polymeric microparticles encapsulating two model hydrophobic drugs, beclomethasone dipropionate (BDP) and flutamide (FLU) were prepared by using the high pressure homogenization-solvent evaporation method starting from a oil-in-water emulsion. For the preparation of polymeric microparticles a α,β-poly(N-2-hydroxyethyl)-D,L-aspartamide (PHEA) graft copolymer with comb like structure was properly synthesized via grafting from atom transfer radical polymerization (ATRP) technique, by using two subsequent synthetic steps. In the first step a polymeric multifunctional macroinitiator was obtained by the conjugation of a proper number of 2-bromoisobutyryl bromide (BIB) residues to the PHEA side chains, obtaining the PHEA-BIB copolymer. PHEA-BIB copolymer was then used as macroinitiator for the polymerization via ATRP of the hydrophobic monomer such as butyl methacrylate (BMA) to obtain the α,β-poly(N-2-hydroxyethyl)-D,L-aspartamide-co-(N-2-ethylen-isobutyrate)-graft-poly(butyl methacrylate) copolymer (PHEA-IB-p(BMA)). Spherical microparticles with 1-3 microns diameter were prepared. Microparticles loaded with BDP or FLU were also prepared. In vitro mucoadhesion and enzymatic degradation studies evidenced bioadhesive properties and biodegradability of prepared microparticles, while release studies showed a different release profiles for the two loaded drugs: BDP was totally released from nanoparticles until 24h in pulmonary mimicking conditions; differently a slower FLU release rate was observed in gastro-intestinal mimicking conditions. The in vitro cytotoxicity activity was assessed using 16HBE and Caco-2 cell lines. Results showed that exposure of both cell lines to BDP-loaded microparticles do not inhibited the cell growth; on the contrary FLU-loaded microparticles inhibited the cell growth, in particular of the Caco-2 cancer cell line, in a concentration- and time-dependent manner. Finally, uptake studies demonstrated that BDP-loaded microparticles and FLU-loaded microparticles effectively increased uptake of loaded drugs in a time-dependent manner, respectively on 16HBE and Caco-2 cell lines.

Release profile and characteristics of electrosprayed particles for oral delivery of a practically insoluble drug

Poly(lactic-co-glycolic acid) (PLGA) microspheres containing celecoxib were prepared via electrospraying, and the influence of three processing parameters namely flow rate, solute concentration and drug loading, on the physico-chemical properties of the particles and the drug-release profile was studied. Microspheres with diameters between 2 and 8 μm were produced and a near-monodisperse size distribution was achieved (polydispersivity indices of 6-12%). Further, the inner structure of the particles showed that the internal porosity of the particles increased with increasing solvent concentration. X-ray powder diffraction (XRPD) analysis indicated that the drug was amorphous and remained stable after eight months of storage. Drug release was studied in USP 2 (United States Pharmacopeia Dissolution Apparatus 2) dissolution chambers, and differences in release profiles were observed depending on the parametric values. Changes in release rate were found to be directly related to the influence of the studied parameters on particle size and porosity. The results indicate that electrospraying is an attractive technique for producing drug-loaded microspheres that can be tailored towards an intended drug-delivery application. Compared with the more conventional spray-drying process, it provides better control of particle characteristics and less aggregation during particle formation. In particular, this study demonstrated its suitability for preparing capsules in which the drug is molecularly dispersed and released in a sustained manner to facilitate improved bioavailability.

Successful factorial design for the optimization of methylprednisolone encapsulation in biodegradable nanoparticles

Due to their crystalline nature, the encapsulation of hydrophobic corticosteroids within polymeric nanoparticles by o/w solvent evaporation method is often difficult to achieve. The aim of this study was to evaluate the effect of both process and formulation parameters on the encapsulation of a model corticosteroid: methylprednisolone (MP). For this purpose, a 3(2)factorial design was performed evaluating the effects of the concentration of emulsifiers and sonication time on the manufactured nanoparticles, followed by a multiresponse optimization. The study also included the evaluation of other parameters such as the type of organic solvent used, polymer characteristics and the initial mass of drug. The optimal nanoparticle formulation using 0.25% (w/v) of emulsifying agent (Polyvinyl-alcohol, PVA) and 5 min of sonication was then characterized. The highest encapsulation was obtained with an organic phase consisting of acetone: dichloromethane (1:1), polyD,L-lactide-co-glycolide (PLGA) 50:50 as polymer and an initial mass of 6.6 mg of methylprednisolone. Nanoparticles size and ζ potential of optimized formulation were respectively around 230 nm and -14 mV. Differential scanning calorimetry (DSC) and X-ray diffraction (XRD) demonstrated that the drug was molecularly dispersed within the nanoparticles. Release study showed that MP-loaded nanoparticles sustained drug release for up to 120 h. This study reflects the importance of factorial design to optimize the manufacture of nanoparticles encapsulating hydrophobic drugs.

The long-term potential of biodegradable poly(lactide-co-glycolide) microparticles as the next-generation vaccine adjuvant

Biodegradable polymeric microparticles of poly(lactide-co-glycolide) (PLG) have been extensively evaluated for drug delivery and vaccine applications over the last three decades. Despite a wealth of studies on the use of PLG microparticles in vaccines through controlled release of antigens, there is no commercial PLG-based vaccine as yet. The key challenge that prevented the development of PLG microparticles as commercial vaccines was the instability of encapsulated antigen. Over the years, advancements were made towards maintaining antigen integrity during PLG microparticle preparation and sterilization. In parallel and independently, development of PLG microparticles as therapeutic commercial products established PLG with an excellent safety record in humans, and as a suitable candidate for next-generation vaccines. Through the combination of Toll-like receptor agonist encapsulation and surface adsorption of antigen, PLG microparticles can be used as a vaccine adjuvant to address unmet medical needs, such as vaccines against HIV, malaria and TB. With strategic development of PLG-based vaccines, PLG microparticles can offer advantages over the conventional vaccine adjuvants allowing commercial development of this adjuvant.

Biophysical characterization and stabilization of the recombinant albumin fusion protein sEphB4-HSA

The use of albumin fusion proteins as therapeutic drug candidates is an attractive approach to design novel biopharmaceuticals with increased circulation time in vivo. The purpose of this work was to characterize and stabilize the fusion protein sEphB4-human serum albumin (HSA), a 120 kDa protein containing the extracellular domain of EphB4 and HSA, and to identify stabilizing excipients for storage. Comparative biophysical studies combined with empirical phase diagram analysis show that both structural integrity and conformational stability of sEphB4 and sEphB4-HSA are best maintained above pH 5 and below 50 °C, with different structural phases observed outside this range. A major physical degradation pathway for sEphB4-HSA is formation of soluble aggregates. Excipient studies using size-exclusion chromatography (SEC), differential scanning calorimetry (DSC), and fluorescence spectroscopy identified disaccharide sugars (e.g., sucrose and trehalose) as effective stabilizers against protein aggregation, and NaCl as an effective stabilizer for protecting overall conformational stability. A combination of biophysical studies with sEphB4-HSA and its individual component proteins (sEphB4 and HSA), along with correlation analysis of SEC and DSC stability data in the presence of different excipients suggest that the aggregation pathway of the albumin fusion protein is primarily mediated by the sEphB4 rather than the HSA component.

Preparation of biodegradable polylactide microparticles via a biocompatible procedure

PLA MPs are prepared via a novel and toxic-chemical-free fabrication route using ethyl lactate, a green solvent and FDA-approved aroma. MPs are obtained by a solution jet break-up and solvent displacement method. Adjusting flow parameters allows the tuning of MPs size between 60 and 180 µm, with reduced polydispersity. Morphological analysis shows microporous particles with Janus-like surface. A fluorophore is successfully loaded into the MPs during their formation step. This versatile green solvent-based procedure is proven to be suitable for drug encapsulation and delivery applications. The method may be extended to different droplet generation techniques.

Tamoxifen-loaded nanoparticles based on a novel mixture of biodegradable polyesters: characterization and in vitro evaluation as sustained release systems

Nanoparticles (NP) from mixtures of two poly(D,L-lactide-co-caprolactone) (PLC) copolymers, PLC 40/60 and PLC 86/14, with poly(D,L-lactide) (PDLLA) and PCL were prepared: PLC 40/60-PCL (25:75), PLC 86/14-PCL (75:25) and PLC 86/14-PLA (75:25). Tamoxifen was loaded with encapsulation efficiency between 65% and 75% (29.9-36.3 µg TMX/ mg NP). All selected systems showed spherical shape and nano-scale size. TMX-loaded NPs were in the range of 293-352 nm. TMX release from NP took place with different profiles depending on polymeric composition of the particles. After 60 days, 59.81% and 82.65% of the loaded drug was released. The cytotoxicity of unloaded NP in MCF7 and HeLa cells was very low. Cell uptake of NP took place in both cell types by unspecific internalization in a time dependent process. The administration of 6 and 10 µm TMX by TMX-loaded NP was effective on both cellular types, mainly in MCF7 cells.

Improved drug loading and antibacterial activity of minocycline-loaded PLGA nanoparticles prepared by solid/oil/water ion pairing method

Background

Low drug entrapment efficiency of hydrophilic drugs into poly(lactic-co-glycolic acid) (PLGA) nanoparticles is a major drawback. The objective of this work was to investigate different methods of producing PLGA nanoparticles containing minocycline, a drug suitable for periodontal infections.

Methods

Different methods, such as single and double solvent evaporation emulsion, ion pairing, and nanoprecipitation were used to prepare both PLGA and PEGylated PLGA nanoparticles. The resulting nanoparticles were analyzed for their morphology, particle size and size distribution, drug loading and entrapment efficiency, thermal properties, and antibacterial activity.

Results

The nanoparticles prepared in this study were spherical, with an average particle size of 85–424 nm. The entrapment efficiency of the nanoparticles prepared using different methods was as follows: solid/oil/water ion pairing (29.9%) > oil/oil (5.5%) > water/oil/water (4.7%) > modified oil/water (4.1%) > nano precipitation (0.8%). Addition of dextran sulfate as an ion pairing agent, acting as an ionic spacer between PEGylated PLGA and minocycline, decreased the water solubility of minocycline, hence increasing the drug entrapment efficiency. Entrapment efficiency was also increased when low molecular weight PLGA and high molecular weight dextran sulfate was used. Drug release studies performed in phosphate buffer at pH 7.4 indicated slow release of minocycline from 3 days to several weeks. On antibacterial analysis, the minimum inhibitory concentration and minimum bactericidal concentration of nanoparticles was at least two times lower than that of the free drug.

Conclusion

Novel minocycline-PEGylated PLGA nanoparticles prepared by the ion pairing method had the best drug loading and entrapment efficiency compared with other prepared nanoparticles. They also showed higher in vitro antibacterial activity than the free drug.

Pharmacokinetic and pharmacodynamic profiles of recombinant human erythropoietin-loaded poly(lactic-co-glycolic acid) microspheres in rats

AIM

To characterize the pharmacokinetic and pharmacodynamic profiles of the recombinant human erythropoietin (rhEPO)-loaded poly(lactic-co-glycolic acid) (PLGA) microspheres in rats.

METHODS

The rhEPO-loaded microspheres were prepared using a solid-in-oil-in-water emulsion method. Pharmacokinetics and pharmacodynamics of the rhEPO-loaded microspheres were evaluated in male Sprague-Dawley rats. The serum rhEPO level was determined with ELISA. The level of anti-rhEPO antibody in the serum was measured to assess the immunogenicity of rhEPO released from the microspheres.

RESULTS

rhEPO was almost completely released from the PLGA microspheres in vitro, following zero-order release kinetics over approximately 30 d. After intramuscular injection (10,000 or 30,000 IU rhEPO/kg) in the rats, the serum rhEPO concentration reached maximum levels on d 1, then decreased gradually and was maintained at nearly steady levels for approximately 4 weeks. Furthermore, the release of rhEPO from the PLGA microspheres was found to be controlled mainly by a dissolution/diffusion mechanism. A good linear correlation (R(2)=0.98) was obtained between the in vitro and in vivo release data. A single intramuscular injection of the rhEPO-loaded PLGA microspheres (10,000 or 30,000 IU rhEPO/kg) in the rats resulted in elevated hemoglobin and red blood cell concentrations for more than 28 d. Moreover, the immunogenicity of rhEPO released from the PLGA microspheres was comparable with that of the unencapsulated rhEPO.

CONCLUSION

The results prove the feasibility of using the PLGA-based microspheres to deliver rhEPO for approximately 1 month.

Scaffolds for Growth Factor Delivery as Applied to Bone Tissue Engineering

There remains a substantial shortfall in the treatment of severe skeletal injuries. The current gold standard of autologous bone grafting from the same patient has many undesirable side effects associated such as donor site morbidity. Tissue engineering seeks to offer a solution to this problem. The primary requirements for tissue-engineered scaffolds have already been well established, and many materials, such as polyesters, present themselves as potential candidates for bone defects; they have comparable structural features, but they often lack the required osteoconductivity to promote adequate bone regeneration. By combining these materials with biological growth factors, which promote the infiltration of cells into the scaffold as well as the differentiation into the specific cell and tissue type, it is possible to increase the formation of new bone. However due to the cost and potential complications associated with growth factors, controlling the rate of release is an important design consideration when developing new bone tissue engineering strategies. This paper will cover recent research in the area of encapsulation and release of growth factors within a variety of different polymeric scaffolds.

Protein instability and immunogenicity: roadblocks to clinical application of injectable protein delivery systems for sustained release

Protein instability and immunogenicity are two main roadblocks to the clinical success of novel protein drug delivery systems. In this commentary, we discuss the need for more extensive analytical characterization in relation to concerns about protein instability in injectable drug delivery systems for sustained release. We then will briefly address immunogenicity concerns and outline current best practices for using state-of-the-art analytical assays to monitor protein stability for both conventional and novel therapeutic protein dosage forms. Next, we provide a summary of the stresses on proteins arising during preparation of drug delivery systems and subsequent in vivo release. We note the challenges and difficulties in achieving the absolute requirement of quantitatively assessing the degradation of protein molecules in a drug delivery system. We describe the potential roles for academic research in further improving protein stability and developing new analytical technologies to detect protein degradation byproducts in novel drug delivery systems. Finally, we provide recommendations for the appropriate approaches to formulation design and assay development to ensure that stable, minimally immunogenic formulations of therapeutic proteins are created. These approaches should help to increase the probability that novel drug delivery systems for sustained protein release will become more readily available as effective therapeutic agents to treat and benefit patients.

The encapsulation of an amphiphile into polystyrene microspheres of narrow size distribution

Encapsulation of compounds into nano- or microsized organic particles of narrow size distribution is of increasing importance in fields of advanced imaging and diagnostic techniques and drug delivery systems. The main technology currently used for encapsulation of molecules within uniform template particles while retaining their size distribution is based on particle swelling methodology, involving penetration of emulsion droplets into the particles. The swelling method, however, is efficient for encapsulation only of hydrophobic compounds within hydrophobic template particles. In order to be encapsulated, the molecules must favor the hydrophobic phase of an organic/aqueous biphasic system, which is not easily achieved for molecules of amphiphilic character.

The following work overcomes this difficulty by presenting a new method for encapsulation of amphiphilic molecules within uniform hydrophobic particles. We use hydrogen bonding of acid and base, combined with a pseudo salting out effect, for the entrapment of the amphiphile in the organic phase of a biphasic system. Following the entrapment in the organic phase, we demonstrated, using fluorescein and (antibiotic) tetracycline as model molecules, that the swelling method usually used only for hydrophobes can be expanded and applied to amphiphilic molecules.

Surgical wound healing using hemostatic gauze scaffold loaded with nanoparticles containing sustained-release granulocyte colony-stimulating factor

Background

The therapeutic strategies for malignant melanoma are still cancer chemotherapy, radiotherapy, and tumor resection. However, these therapeutic strategies often lead to a reduced neutrophilic granulocyte count or loss of more blood after surgical tumor resection. In this study, we developed a formulation of hemostatic gauze impregnated with sustained-release granulocyte colony-stimulating factor (G-CSF) with increasing of the neutrophilic granulocyte count in the blood following chemotherapy and decreasing blood loss after surgical tumor resection.

Methods

We designed a formulation with both hemostatic properties and increased neutrophil content to be used in cancer chemotherapy, radiotherapy, and tumor resection, comprising a hemostatic gauze as a scaffold and (G-CSF)-loaded dextran nanoparticles coated with polylactic-co- glycolic acid (PLGA) solution fabricated by direct spray-painting onto the scaffold and then vacuum-dried at room temperature. The performance of this system was evaluated in vitro and in vivo.

Results

Nearly zero-order release of G-CSF was recorded for 12–14 days, and the cumulative release of G-CSF retained over 90% of its bioactivity in a NFS-60 cell line proliferation assay when the scaffold was incubated in phosphate-buffered saline (pH 7.4) at 37°C. The in vivo hemostatic efficacy of this formulation was greater than that of native G-CSF, the scaffold directly spray-painted with G-CSF solution or PLGA organic solution as a coating, or when a blank scaffold was covered with the coating.

Conclusion

Our results suggest that this formulation has both hemostatic properties and increased neutrophil activity.

Reversible blocking of amino groups of octreotide for the inhibition of formation of acylated peptide impurities in poly(lactide-co-glycolide) delivery systems

The purpose of this study was to develop a novel method to inhibit the formation of acylated peptide impurities in poly(D,L-lactide-co-glycolide) (PLGA) formulations by reversely blocking the amino groups of octreotide with maleic anhydride (MA). Two mono-MA conjugates with different modification sites (N terminus and Lys residue) and di-MA conjugate of octreotide were prepared and isolated by reversed-phase high-performance liquid chromatography (RP-HPLC). The polymer interaction of peptides and the formation of acylated peptides were monitored by RP-HPLC. The stability of MA-octreotide conjugates in PLGA films was studied in 0.1 M phosphate buffer (pH 7.4) at 37°C. The conjugation of MA to octreotide substantially inhibited the interaction of peptide with PLGA polymer and the subsequent formation of acylated peptide impurities. The MA-octreotides were successfully converted to intact octreotide as pH drops by PLGA hydrolysis. In PLGA films, MA-octreotide also showed complete inhibition of peptide acylation. In conclusion, MA conjugation provides a viable approach for stabilizing peptides in PLGA delivery systems.