The Buchwald-Hartwig Amination After 25 Years

Synthesis of 5-(Aryl)amino-1,2,3-triazole-containing 2,1,3-Benzothiadiazoles via Azide-Nitrile Cycloaddition Followed by Buchwald-Hartwig Reaction

An efficient access to the novel 5-(aryl)amino-1,2,3-triazole-containing 2,1,3-benzothiadiazole derivatives has been developed. The method is based on 1,3-dipolar azide-nitrile cycloaddition followed by Buchwald-Hartwig cross-coupling to afford the corresponding N-aryl and N,N-diaryl substituted 5-amino-1,2,3-triazolyl 2,1,3-benzothiadiazoles under NHC-Pd catalysis. The one-pot diarylative Pd-catalyzed heterocyclization opens the straightforward route to triazole-linked carbazole-benzothiadiazole D-A systems. The optical and electrochemical properties of the compound obtained were investigated to estimate their potential application as emissive layers in OLED devises. The quantum yield of photoluminescence (PLQY) of the synthesized D-A derivatives depends to a large extent on electron-donating strengths of donor (D) component, reaching in some cases the values closed to 100%. Based on the most photoactive derivative and wide bandgap host material mCP, a light-emitting layer of OLED was made. The device showed a maximum brightness of 8000 cd/m2 at an applied voltage of 18 V. The maximum current efficiency of the device reaches a value of 3.29 cd/A.

Relevant Developments in the Use of Three-Component Reactions for the Total Synthesis of Natural Products. The last 15 Years

Multicomponent reactions (MCRs) offer a highly useful and valuable strategy that can fulfill an important role in synthesizing complex polysubstituted compounds, by simplifying otherwise long sequences and increasing their efficiency. The total synthesis of selected natural products employing three-component reactions as their common strategic MCR approach, is reviewed on a case-by-case basis with selected targets conquered during the last 15 years. The revision includes detailed descriptions of the selected successful sequences; relevant information on the isolation, and bioactivity of the different natural targets is also briefly provided.

A Bimolecular Homolytic Substitution-Enabled Platform for Multicomponent Cross-Coupling of Unactivated Alkenes

The construction of C(sp3)-C(sp3) bonds remains one of the most difficult challenges in cross-coupling chemistry. Here, we report a photoredox/nickel dual catalytic approach that enables the simultaneous formation of two C(sp3)-C(sp3) linkages via trimolecular cross-coupling of alkenes with alkyl halides and hypervalent iodine-based reagents. The reaction harnesses a bimolecular homolytic substitution (SH2) mechanism and chemoselective halogen-atom transfer (XAT) to orchestrate the regioselective addition of electrophilic and nucleophilic alkyl radicals across unactivated alkenes without the need for a directing auxiliary. Utility is highlighted through late-stage (fluoro)alkylation and (trideutero)methylation of C═C bonds bearing different substitution patterns, offering straightforward access to drug-like molecules comprising sp3-hybridized carbon scaffolds.

Scalable Transition-Metal-Free Synthesis of Aryl Amines from Aryl Chlorides through X@RONa-Catalyzed Benzyne Formation

Aryl amines are highly useful organic chemicals, but large-scale, transition-metal-free syntheses of aryl amines are surprisingly underdeveloped. A mild and scalable (up to 500 mmol) aryl amine synthesis from benzyne chemistry was invented using easily accessible aryl chlorides as precursors, NaH as a stoichiometric base, and a new type of sodium alkoxide cluster, X@RONa, as a catalyst. The cluster catalyst X@RONa featured an externally hydrophobic dodecameric sodium alkoxide shell housing an encapsulated center anion. The cluster made from methoxy-tert-butanol was found to be the most effective. The intramolecular version of this reaction allowed the synthesis of indolines and indoles. Experimental and computational mechanistic studies revealed that the rate-determining step was likely the transport of solid NaH into the X@RONa cluster in the organic phase.

Promotion of Water as Solvent in Amination of 4-Chloropyrrolopyrimidines and Related Heterocycles under Acidic Conditions

A switch of reaction medium from organic solvents to water can improve the safety and lower the cost of production processes. Hydrochloric acid-promoted amination of fused pyrimidines has been studied using 4-chloro-7H-pyrrolo[2,3-d]pyrimidine and aniline as model compounds. Higher rate was observed in water than in four alcoholic solvents and DMF. An important aspect is that the amount of acid should be kept low to minimize the competing solvolysis. The substrate scope for the amination in water was evaluated by reacting 4-chloro-7H-pyrrolo[2,3-d]pyrimidine with 20 aniline derivatives with variance in steric and electronic properties. Preparative useful reactions were seen for 14 of the 20 derivatives. Unsuited nucleophiles are ortho-substituted anilines with a pKa below 1. Amination of the corresponding quinazoline, thienopyrimidine, and purine also proceeded well in water. Highly lipophilic and crystalline compounds are more efficiently aminated in 2-propanol. Aliphatic and benzylic amines react poorly under acidic conditions, but these aminations can be done in water without acid.

Synthesis of meta-carbonyl phenols and anilines

Phenols and anilines are of extreme importance for medicinal chemistry and material science. The development of efficient approaches to prepare both compounds has thus long been a vital research topic. The utility of phenols and anilines directly reflects the identity and pattern of substituents on the benzenoid ring. Electrophilic substitutions remain among the most powerful synthetic methods to substituted phenols and anilines, yet in principle achieving ortho- and para-substituted products. Therefore, the selective preparation of meta-substituted phenols and anilines is the most significant challenge. We herein report an efficient copper-catalyzed dehydrogenation strategy to exclusively synthesize meta-carbonyl phenols and anilines from carbonyl substituted cyclohexanes. Mechanistic studies indicate that this transformation undergoes a copper-catalyzed dehydrogenation/allylic hydroxylation or amination/oxidative dehydrogenation/aromatization cascade process.

Amino-λ3 -iodane-Enabled Electrophilic Amination of Arylboronic Acid Derivatives

In this report, we describe the use of amino-λ3 -iodanes in the electrophilic amination of arylboronic acids and boronates. Iodine(III) reagents with transferable amino groups, including one with an NH2 group, were synthesized and used in the amination, allowing the synthesis of a wide range of primary and secondary (hetero)arylamines. Mechanistic studies by DFT calculations indicate that the reaction proceeds through an electrophilic amination process from a tetravalent borate complex with a B-N dative bond.

Dual role of nitroarenes as electrophiles and arylamine surrogates in Buchwald-Hartwig-type coupling for C-N bond construction

One of the most widely utilized methods for the construction of C(sp2)-N bonds is the transition-metal-catalyzed cross-coupling of aryl halides/boronic acids with amines, known as Ullmann condensation, Buchwald-Hartwig amination, and Chan-Lam coupling. However, aryl halides/boronic acids often require multi-step preparation while generating a large amount of corrosive and toxic waste, making the reaction less attractive. Herein, we present an unprecedented method for the C(sp2)-N formation via Buchwald-Hartwig-type reactions using synthetically upstream nitroarenes as the sole starting materials, thus eliminating the need for arylhalides and pre-formed arylamines. A diverse range of symmetrical di- and triarylamines were obtained in a single step from nitroarenes, and more importantly, various unsymmetrical di- and triarylamines were also highly selectively synthesized in a one-pot/two-step process. Furthermore, the success of the scale-up experiments, the late-stage functionalization of a drug intermediate, and the rapid preparation of hole-transporting material TCTA showcased the utility and practicality of this protocol in synthetic chemistry. Mechanistic studies indicate that this transformation may proceed via an arylamine intermediate generated in situ from the reduction of nitroarenes, which is followed by a denitrative Buchwald-Hartwig-type reaction with another nitroarene to form a C-N bond.

Bromopyrene Symphony: Synthesis and Characterisation of Isomeric Derivatives at Non-K Region and Nodal Positions for Diverse Functionalisation Strategies

Pyrene, a renowned aromatic hydrocarbon, continues to captivate researchers due to its versatile properties and potential applications across various scientific domains. Among its derivatives, bromopyrenes stand out for their significance in synthetic chemistry, materials science, and environmental studies. The strategic functionalisation of pyrene at non-K region and nodal positions is crucial for expanding its utility, allowing for diverse functionalisation strategies. Bromo-substituted precursors serve as vital intermediates in synthetic routes; however, the substitution pattern of bromoderivatives significantly impacts their subsequent functionalisation and properties, posing challenges in synthesis and purification. Understanding the distinct electronic structure of pyrene is pivotal, dictating the preferential electrophilic aromatic substitution reactions at specific positions. Despite the wealth of literature, contradictions and complexities persist in synthesising suitably substituted bromopyrenes due to the unpredictable nature of substitution reactions. Building upon historical precedents, this study provides a comprehensive overview of bromine introduction in pyrene derivatives, offering optimised synthesis conditions based on laboratory research. Specifically, the synthesis of mono-, di-, tri-, and tetrabromopyrene isomers at non-K positions (1-, 3-, 6-, 8-) and nodal positions (2-, 7-) is systematically explored. By elucidating efficient synthetic methodologies and reaction conditions, this research contributes to advancing the synthesis and functionalisation strategies of pyrene derivatives, unlocking new possibilities for their utilisation in various fields.

Recent advances in biocatalytic C-N bond-forming reactions

Molecules containing C-N bonds are of paramount importance in a diverse array of organic-based materials, natural products, pharmaceutical compounds, and agricultural chemicals. Biocatalytic C-N bond-forming reactions represent powerful strategies for producing these valuable targets, and their significance in the field of synthetic chemistry has steadily increased over the past decade. In this review, we provide a concise overview of recent advancements in the development of C-N bond-forming enzymes, with a particular emphasis on the inherent chemistry involved in these enzymatic processes. Overall, these enzymatic systems have proven their potential in addressing long-standing challenges in traditional small-molecule catalysis.

Excited-State Nickel-Catalyzed Amination of Aryl Bromides: Synthesis of Diphenylamines and Primary Anilines

Excited-state nickel-catalyzed C-N cross-coupling of aryl bromides with sodium azide enables the synthesis of diarylamines and primary anilines under mild reaction conditions. The oxidative addition of electron-rich aryl bromides with low-valent Ni under the photochemical conditions is endothermic. Herein, we demonstrate a light-mediated nickel-catalyzed reaction of electronically rich aryl bromides that yields diarylamines, while the reaction with electron-deficient aryl bromides gives access to anilines at room temperature.

One-pot Synthesis and Photophysical Studies of Α-cycloamino-substituted 5-aryl-2,2'-bipyridines

A series of α-cycloamine substituted 2,2'-bipyridines 3ae'-3ce' was obtained via the one-pot approach based on ipso-substitution of a cyano-group in 1,2,4-triazines, followed by aza-Diels-Alder reaction in good yields. Photophysical properties, including fluorosolvatochromism, were studied for 3ae'-3ce' and were compared with α-unsubstituted 2,2'-bipyridines. In addition, dipole moments differences in ground and excited states were calculated by both Lippert-Mataga equation and DFT studies and were compared to each other. The correlation between the size of cycloamine unit and the dipole moments differences value (based on Lippert-Mataga equation) was observed. In addition charge transfer indices (DCT, Λ, H and t) were calculated to demonstrate influence of molecular structure on the intramolecular charge transfer degree.

Characterization of the Ligand Properties of Donor-stabilized Pnictogenyltrielanes

A general synthesis and the characterization of novel alkyl-substituted NHC-stabilized pnictogenylboranes NHC ⋅ BH2 ER2 (NHC=N-heterocyclic carbene, E=P, As; R2 =Me2 , Ph2 , t BuH, Cy2 , (SiMe3 )2 ) are reported. These compounds were reacted with Ni(CO)4 to the corresponding complexes of the type [(NHC ⋅ BH2 ER2 )Ni(CO)3 ] to determine their donor strength by Tolman Electronic Parameters (TEPs) and their steric demand as ligands compared to classical phosphines, superbasic phosphines and other commonly applied donor systems. The results show that the NHC-stabilized pnictogenyltrielanes can be considered as being highly basic, while their steric influence depends strongly on the organic residues as well as the donor attached to the {BH2 } moiety. Although weaker than commonly used superbasic phosphines, the donor strength of pnictogenyltrielanes in general can be classified as of similar strength as NHCs. The steric and electronic properties can easily be modified by alkyl substitution as evident from the TEP trends.

Metal-Free, Hindered, Regioselective Access to Multifunctional Groups Diarylamines via SN Ar Substitution of P-Nitroso Aromatic Methyl Ether by Arylamines

Multifunctional groups diarylamines, an innovative product, efficiently produced from arylamines and p-nitrosoanisole derivatives by intermolecular SN Ar under weak acid conditions. This SN Ar proceeds under mild reaction conditions, and more significantly, the substrates involved do not necessarily require strong electron-withdrawing groups. Moreover, this SN Ar is characterized by resistance to space crowding, tolerance to halogen and nitroso functional groups, and high regioselectivity. Mechanistic observations suggest that the SN Ar is the result of the transfer of the positive charge center of the protonated nitroso group to the p-methoxy group.

Werner Salt as Nickel and Ammonia Source for Photochemical Synthesis of Primary Aryl Amines

Cheap, stable and easy-to-handle Werner ammine salts have been known for more than a century; but they have been rarely used in organic synthesis. Herein, we report that the Werner hexammine complex [Ni(NH3 )6 ]Cl2 can be used as both a nitrogen and a catalytic nickel source that allow for the efficient amination of aryl chlorides in the presence of a catalytic amount of bipyridine ligand under the irradiation of 390-395 nm light without the need of any additional catalysts. More than 80 aryl chlorides, including more than 20 drug molecules, were aminated, demonstrating the practicality and generality of this method in synthetic chemistry. A slow NH3 release mechanism is in operation, obviating the problem of catalyst poisoning. Still interestingly, we show that the Werner salt can be easily recovered and reused, solving the problem of difficult recovery of transition metal nickel catalysts. The protocol thus provides an efficient new strategy for the synthesis of primary aryl amines.

An assay for aryl radicals using BHAS coupling

Aryl radicals are intermediates in many reactions, but determining their presence unambiguously is often challenging. As we recently reported, reaction of 2-iodo-1,3-dimethylbenzene (7) in benzene with KOtBu and a suitable organic additive, leads to a base-induced homolytic aromatic substitution (BHAS) coupling reaction giving 2,6-dimethylbiphenyl (12) and biphenyl (3) as coupled products, together with xylene (13). In this case, biphenyl arises from a radical translocation and is the major coupling product. This paper now quantitatively investigates that reaction, which shows a very similar ratio for 3 : 12 [ca. 4 : 1] when using different sources of radical initiation. Deuterium isotope studies provide detailed mechanistic support for the proposed mechanism; when carried out in C6D6vs. C6H6, the reaction is characterised by a strong isotope effect for formation of 3-d10vs. 3, but not for formation of 12-d5vs. 12. These distinctive properties mean that the transformation can act as an assay for aryl radicals. An advantage of such a BHAS process is its sensitivity, since it involves a chain reaction that can amplify radical activity.

Visible-Light-Driven Iron-Catalyzed Intermolecular Benzylic C(sp3)-H Amination with 1,2,3,4-Tetrazoles

A visible-light-driven iron-catalyzed C(sp3)-H amination of diphenylmethane derivatives with 1,2,3,4-tetrazoles under mild conditions has been developed. The reaction proceeds with photosensitizer-free conditions and features satisfactory to good yields. Mechanistic studies revealed that the reaction proceeded via an iron-nitrene intermediate, and H atom abstraction was the rate-determining step. Computational studies showed that the denitrogenation of 1,2,3,4-tetrazole depends on the conversion of the sextet ground state of 1,2,3,4-tetrazole-bounding iron species to the quartet spin state under visible-light irradiation.

Accelerating Pharmaceutical Process Development with an Acoustic Droplet Ejection-Multiple Reaction Monitoring-Mass Spectrometry Workflow

Fast-paced pharmaceutical process developments (e.g., high-throughput experimentation, directed evolution, and machine learning) involve the introduction of fast, sensitive, and accurate analytical assays using limited sample volumes. In recent years, acoustic droplet ejection (ADE) coupled with an open port interface has been invented as a sampling technology for mass spectrometry, providing high-throughput nanoliter analytical measurements directly from the standard microplates. Herein, we introduce an ADE-multiple reaction monitoring-mass spectrometry (ADE-MRM-MS) workflow to accelerate pharmaceutical process research and development (PR&D). This systematic workflow outlines the selection of MRM transitions and optimization of assay parameters in a data-driven manner using rapid measurements (1 sample/s). The synergy between ADE sampling and MRM analysis enables analytical assays with excellent sensitivity, selectivity, and speed for PR&D reaction screenings. This workflow was utilized to develop new ADE-MRM-MS assays guiding a variety of industrial processes, including (1) screening of Ni-based catalysts for C-N cross-coupling reaction at 1 Hz and (2) high-throughput regioisomer analysis-enabled enzyme library screening for peptide ligation reaction. ADE-MRM-MS assays were demonstrated to deliver accurate results that are comparable to conventional liquid chromatography (LC) experiments while providing >100-fold throughput enhancement.

Photoexcitation of Distinct Divalent Palladium Complexes in Cross-Coupling Amination Under Air

The development of metal complexes that function as both photocatalyst and cross-coupling catalyst remains a challenging research topic. So far, progress has been shown in palladium(0) excited-state transition metal catalysis for the construction of carbon-carbon bonds where the oxidative addition of alkyl/aryl halides to zero-valent palladium (Pd0 ) is achievable at room temperature. In contrast, the analogous process with divalent palladium (PdII ) is uphill and endothermic. For the first time, we report that divalent palladium can act as a light-absorbing species that undergoes double excitation to realize carbon-nitrogen (C-N) cross-couplings under air. Differently substituted aryl halides can be applied in the mild, and selective cross-coupling amination using palladium acetate as both photocatalyst and cross-coupling catalyst at room temperature. Density functional theory studies supported by mechanistic investigations provide insight into the reaction mechanism.

Preparation of Aromatic and Heterocyclic Amines by the Electrophilic Amination of Functionalized Diorganozincs with Polyfunctional O-2,6-Dichlorobenzoyl Hydroxylamines

We report a catalyst-free electrophilic amination, which enables the synthesis of aromatic and heterocyclic amines. By subjecting diarylzinc or diheteroarylzinc compounds to readily accessible O-2,6-dichlorobenzoyl hydroxylamines in the presence of MgCl2 in dioxane at a temperature of 60 °C (8-16 h). This new electrophilic amination allowed an expedited synthesis of two pharmaceutically significant compounds: vortioxetine is a key intermediate of delamanid. This approach offers opportunities for the streamlined synthesis of amine-based molecules in the pharmaceutical industry.

Iodine-Catalyzed Radical C-H Amination of Nonaromatic Imidazole Oxides: Access to Cyclic α-Aminonitrones

A straightforward cross-dehydrogenative coupling approach to incorporate alicyclic amino residues into the structure of model cyclic aldonitrones, 2H-imidazole oxides, is reported. The elaborated C(sp2)-H functionalization is achieved by employing cyclic amines in the presence of the I2-tert-butyl hydroperoxide (TBHP) reagent system. As a result, a series of 19 novel heterocyclic derivatives were obtained in yields of up to 97%. A mechanistic study involving electron paramagnetic resonance spectroscopic experiments allowed the radical nature of the reaction to be confirmed. In particular, the envisioned mechanistic rationale comprises N-iodination of a cyclic amine, followed by N-I bond homolysis of the resulting intermediate and subsequent amination of the nitrone moiety via the newly generated nitrogen-centered radical.

Visible light-induced palladium-carbon bond weakening in catalytically relevant T-shaped complexes

Triggering one-electron redox processes during palladium catalysis holds the potential to unlock new reaction mechanisms and synthetic methods not previously accessible in the typical two-electron reaction manifolds that dominate palladium catalysis. We report that T-shaped organopalladium(ii) complexes coordinated by a bulky monophosphine, a class of organometallic intermediate featured in a range of contemporary catalytic reactions, undergo blue light-promoted bond weakening leading to mild and efficient homolytic cleavage of strong Pd(ii)-C(sp3) bonds under ambient conditions. The origin of light-triggered radical formation in these systems, which lack an obvious ligand-based chromophore (i.e., π-systems), was investigated using a combination of DFT calculations, photoactinometry, and transient absorption spectroscopy. The available data suggest T-shaped organopalladium(ii) complexes manifest unusual blue light-accessible Pd-to-C(sp3) transition. The quantum efficiency and excited state lifetime of this process were unexpectedly superior compared to a prototypical (α-diimine)Pd(ii) complex featuring a low-lying, ligand-centered LUMO (π*). These results suggest coordinatively-unsaturated organopalladium(ii) compounds, catalysts in myriad catalytic processes, have untapped potential for one-electron reactivity under visible light excitation.

Palladium-catalyzed synthesis and anti-AD biological activity evaluation of N-aryl-debenzeyldonepezil analogues

A series of novel N-aryl-debenzeyldonepezil derivatives (1-26) were designed and synthesized as cholinesterase inhibitors by the modification of anti-Alzheimer's disease drug donepezil, using Palladium catalyzed Buchwald-Hartwig cross-coupling reaction as a key chemical synthesis strategy. In vitro cholinesterase inhibition studies demonstrated that the majority of synthesized compounds exhibited high selective inhibition of AChE. Among them, analogue 13 possessing a quinoline functional group showed the most potent AChE inhibition effect and significant neuroprotective effect against H2O2-induced injury in SH-SY5Y cells. Furthermore, Compound 13 did not show significant cytotoxicity on SH-SY5Y. These results suggest that 13 is a potential multifunctional active molecule for treating Alzheimer's disease.

Dithienoazepine-Based Near-Infrared Dyes: Janus-Faced Effects of a Thiophene-Fused Structure on Antiaromatic Azepines

We here disclose that the incorporation of thiophene rings into a seven-membered 8π azepine in a fused fashion produces a useful antiaromatic core for near-infrared (NIR) dyes. In contrast to dibenzazepine derivatives with bent structures, dithieno-fused derivatives with electron-accepting groups adopt flat conformations in the ground state. The dithieno-fused derivatives exhibited broad absorption spectra that cover the visible region as well as sharp emission bands in the NIR region, which are considerably red-shifted relative to those of the dibenzo-fused congeners. Theoretical study revealed two contradictory effects of the less-aromatic thiophene-fused structure, i.e., the enhancement of the antiaromaticity of the adjacent azepine ring and the relief of the antiaromaticity through the contribution of a quinoidal resonance form. The combination of the dithienoazepine core with cationic electron-accepting groups produced a NIR fluorescent dye with an emission at 878 nm in solution.

Catalyst- and Additive-free, Regioselective 1,6-Hydroarylation of para-Quinone Methides with Anilines in HFIP

A simple and efficient method for the synthesis of diarylmethyl-functionalized anilines through the hexafluoroisopropanol (HFIP)-mediated regioselective 1,6-hydroarylation reaction of para-quinone methides (p-QMs) with anilines under catalyst- and additive-free conditions is reported. Various kinds of p-QMs and amines (e. g. primary, secondary and tertiary amines) are well tolerated in this transformation without the pre-protection of amino group, and the corresponding products could be generated with good to excellent yields and satisfactory regioselectivity under the optimized reaction conditions. In addition to adaptable amine compounds, indoles and their derivatives are also compatible with this reaction system. This transformation can be easily extended to a gram scale-synthesis level to synthesize the target product. Furthermore, it is worth noting that some complex small aniline molecules with biological activity can be selectively modified using this method. The possible reaction mechanism is proposed through the step-by-step control experiments and DFT calculations, showing that the key process for achieving the regioselective 1,6-hydroarylation of p-QMs is the hydrogen bonding effect of HFIP to substrates.

Synthesis and vectorial functionalisation of pyrazolo[3,4-c]pyridines

Heterocycles are a cornerstone of fragment-based drug discovery (FBDD) due to their prevalence in biologically active compounds. However, novel heterocyclic fragments are only valuable if they can be suitably elaborated to compliment a chosen target protein. Here we describe the synthesis of 5-halo-1H-pyrazolo[3,4-c]pyridine scaffolds and demonstrate how these compounds can be selectively elaborated along multiple growth-vectors. Specifically, N-1 and N-2 are accessed through protection-group and N-alkylation reactions; C-3 through tandem borylation and Suzuki-Miyaura cross-coupling reactions; C-5 through Pd-catalysed Buchwald-Hartwig amination; and C-7 through selective metalation with TMPMgCl.LiCl followed by reaction with electrophiles or transmetalation to ZnCl2 and Negishi cross-coupling. Linking multiple functionalisation strategies emulates a hit-to-lead pathway and demonstrates the utility of pyrazolo[3,4-c]pyridines to FBDD.

Nitrenium ions as new versatile reagents for electrophilic amination

Herein we report the utilization of N-heterocyclic nitrenium ions - easily prepared, bench-stable and non-oxidating nitrogen sources for the efficient electrophilic amination of aliphatic and aromatic organometallic nucleophiles, towards the facile and general preparation of primary amines. To this end, a plethora of abundant organolithium and organomagnesium reagents were combined with nitrenium salts to generate a variety of previously unexplored N-alkyl and N-aryl triazanes. Through the simple hydrogenolysis of these relatively stable triazanes, we have prepared a diverse scope of primary amines, including linear and branched aliphatic as well as (hetero)aromatic amines possessing various stereo-electronic substituents. Furthermore, we present the facile synthesis of valuable 15N-labelled primary amines from easily prepared 15N-labelled nitrenium salts, as well as a one-pot approach to biologically relevant primary amines. Finally, a recyclable variant of the nitrenium precursor was prepared and a simple recovery protocol was developed to improve the atom-economy of this procedure.

Reductive coupling of nitro compounds with boronic acid derivatives: an overview

The purpose of this review is to summarize the current literature on reductive C-N coupling of nitro compounds and boronic acids, with special emphasis on the mechanistic features of the reactions. The metal-catalyzed reactions are discussed first. This is followed by electro-synthesis and organophosphorus-catalyzed reactions. Finally, the available examples of catalyst-free reactions will be covered at the end of this review.

Catalytic Amination of Alcohols Using Diazo Compounds under Manganese Catalysis Through Hydrogenative N-Alkylation Reaction

Sustainable chemical production requires fundamentally new types of catalysts and catalytic technologies. The development of coherent and robust catalytic systems based on earth-abundant transition metals is essential, but highly challenging. Herein, we systematically explored a general hydrogenative cleavage/N-alkylation tandem of cyclic and acyclic diazo (N=N) compounds to value-added amines under manganese catalysis. The reaction is catalyzed by a single-site molecular manganese complex and proceeds via tandem dehydrogenation, transfer hydrogenation, and borrowing hydrogenation strategies. Interestingly, the reaction involves abundantly available renewable feedstocks, such as alcohols, that can act as (transfer)hydrogenating and alkylating agents. The synthetic application of our approach in large-scale pharmaceutical synthesis and easy access to highly demanding N-CH3 /CD3 derivatives are also demonstrated. Kinetic studies show that the reaction rate depends on the concentration of alcohol and Mn-catalyst and follows fractional orders. Several selective bond activation/formation reactions occur sequentially via amine-amide metal-ligand cooperation.

Discovery and Synthesis of a Naturally Derived Protein Kinase Inhibitor that Selectively Inhibits Distinct Classes of Serine/Threonine Kinases

The DNAJB1-PRKACA oncogenic gene fusion results in an active kinase enzyme, J-PKAcα, that has been identified as an attractive antitumor target for fibrolamellar hepatocellular carcinoma (FLHCC). A high-throughput assay was used to identify inhibitors of J-PKAcα catalytic activity by screening the NCI Program for Natural Product Discovery (NPNPD) prefractionated natural product library. Purification of the active agent from a single fraction of an Aplidium sp. marine tunicate led to the discovery of two unprecedented alkaloids, aplithianines A (1) and B (2). Aplithianine A (1) showed potent inhibition against J-PKAcα with an IC50 of ∼1 μM in the primary screening assay. In kinome screening, 1 inhibited wild-type PKA with an IC50 of 84 nM. Further mechanistic studies including cocrystallization and X-ray diffraction experiments revealed that 1 inhibited PKAcα catalytic activity by competitively binding to the ATP pocket. Human kinome profiling of 1 against a panel of 370 kinases revealed potent inhibition of select serine/threonine kinases in the CLK and PKG families with IC50 values in the range ∼11-90 nM. An efficient, four-step total synthesis of 1 has been accomplished, enabling further evaluation of aplithianines as biologically relevant kinase inhibitors.

Tunable Regioselectivity in C-H-Activated Direct Arylation Reactions of Dithieno[3,2-b:2',3'-d]pyrroles

In this study, regioselectively controlled direct arylation of dithieno[3,2-b:2,3'-d]pyrroles (DTPs) is reported. By carefully selecting the catalytic system, Pd source, ligand, and additives, we achieved either selective N-arylation or unprecedented β-arylation and β,β'-diarylation of the DTP core through C-H activation when reacting unsubstituted H-DTP with 9-anthracenyl halides. For N-substituted DTPs, we obtained regioselective carboxylate-assisted arylation of the α-position(s). Consequently, depending on the catalytic system and substitution at the DTP nitrogen, we successfully synthesized novel regioselectively substituted DTPs, including N-aryl, rarely reported β-aryl, β,β'-diaryl, α-aryl, and α,α'-diaryl scaffolds. These compounds can be straightforwardly prepared and further functionalized for applications as organic electronic materials.

Mechanistic Evidence of a Ni(0/II/III) Cycle for Nickel Photoredox Amide Arylation

This work demonstrates the dominance of a Ni(0/II/III) cycle for Ni-photoredox amide arylation, which contrasts with other Ni-photoredox C-heteroatom couplings that operate via Ni(I/III) self-sustained cycles. The kinetic data gathered when using different Ni precatalysts supports an initial Ni(0)-mediated oxidative addition into the aryl bromide. Using NiCl2 as the precatalyst resulted in an observable induction period, which was found to arise from a photochemical activation event to generate Ni(0) and to be prolonged by unproductive comproportionation between the Ni(II) precatalyst and the in situ generated Ni(0) active species. Ligand exchange after oxidative addition yields a Ni(II) aryl amido complex, which was identified as the catalyst resting state for the reaction. Stoichiometric experiments showed that oxidation of this Ni(II) aryl amido intermediate was required to yield functionalized amide products. The kinetic data presented supports a rate-limiting photochemically-mediated Ni(II/III) oxidation to enable C-N reductive elimination. An alternative Ni(I/III) self-sustained manifold was discarded based on EPR and kinetic measurements. The mechanistic insights uncovered herein will inform the community on how subtle changes in Ni-photoredox reaction conditions may impact the reaction pathway, and have enabled us to include aryl chlorides as coupling partners and to reduce the Ni loading by 20-fold without any reactivity loss.

A Paradigm Shift in Catalysis: Electro- and Photomediated Nickel-Catalyzed Cross-Coupling Reactions

ConspectusTransition-metal catalyzed cross-coupling reactions are fundamental reactions in organic chemistry, facilitating strategic bond formations for accessing natural products, organic materials, agrochemicals, and pharmaceuticals. Redox chemistry enables access to elusive cross-coupling mechanisms through single-electron processes as an alternative to classical two-electron strategies predominated by palladium catalysis. The seminal reports of Baran, MacMillan, Doyle, Molander, Weix, Lin, Fu, Reisman, and others in merging redox perturbation (photochemical, electrochemical, and purely chemical) with catalysis are pivotal to the current resurgence and mechanistic understanding of first-row transition metal-based catalysis. The hallmark of this redox platform is the systematic modulation of transition-metal oxidation states by a photoredox catalyst or at a heterogeneous electrode surface. Electrocatalysis and photocatalysis enhance transition metal catalysis' capacity for bond formation through electron- or energy-transfer processes that promote otherwise challenging elementary steps or elusive mechanisms. Cross-coupling conditions promoted by electrocatalysis and photocatalysis are mild, and bond formation proceeds with exceptionally high chemoselectivity and wide functional group tolerance. The interfacing of abundant first-row transition-metal catalysis with electrocatalysis and photocatalysis has brought about a paradigm shift in cross-coupling technology as practitioners are quickly applying these tools in synthesizing fine chemicals and pharmaceutically relevant motifs. In particular, the merger of Ni catalysis with electro- and photochemistry ushered in a new era for carbon-carbon and carbon-heteroatom cross-couplings with expanded generality compared to their thermally driven counterparts. Over the past decade, we have developed enabling photo- and electrochemical methods throughout our combined research experience in industry (BMS, AstraZeneca) and academia (Professor Baran, Scripps Research) in cross-disciplinary collaborative environments. In this Account, we will outline recent progress from our past and present laboratories in photo- and electrochemically mediated Ni-catalyzed cross-couplings. By highlighting these cross-coupling methodologies, we will also compare mechanistic features of both electro- and photochemical strategies for forging C(sp2)-C(sp3), C(sp3)-C(sp3), C-O, C-N, and C-S bonds. Through these side-by-side comparisons, we hope to demystify the subtle differences between the two complementary tools to enact redox control over transition metal catalysis. Finally, building off the collective experience of ourselves and the rest of the community, we propose a tactical user guide to photo- and electrochemically driven cross-coupling reactions to aid the practitioner in rapidly applying such tools in their synthetic designs.

An Unusual Microdomain Factor Controls Interaction of Organic Halides with the Palladium Phase and Influences Catalytic Activity in the Mizoroki-Heck Reaction

In this work, using a combination of scanning and transmission electron microscopy (SEM and TEM), the transformations of palladium-containing species in imidazolium ionic liquids in reaction mixtures of the Mizoroki-Heck reaction and in related organic media are studied to understand a challenging question of the relative reactivity of organic halides as key substrates in modern catalytic technologies. The microscopy technique detects the formation of a stable nanosized palladium phase under the action of an aryl (Ar) halide capable of forming microcompartments in an ionic liquid. For the first time, the correlation between the reactivity of the aryl halide and the microdomain structure is observed: Ar-I (well-developed microdomains) > Ar-Br (microphase present) > Ar-Cl (minor amount of microphase). Previously, it is assumed that molecular level factors, namely, carbon-halogen bond strength and the ease of bond breakage, are the sole factors determining the reactivity of aryl halides in catalytic transformations. The present work reports a new factor connected with the nature of the organic substrates used and their ability to form a microdomain structure and concentrate metallic species, highlighting the importance of considering both the molecular and microscale properties of the reaction mixtures.

Accessing three-dimensional molecular diversity through benzylic C-H cross-coupling

Pharmaceutical and agrochemical discovery efforts rely on robust methods for chemical synthesis that rapidly access diverse molecules1,2. Cross-coupling reactions are the most widely used synthetic methods3, but these methods typically form bonds to C(sp2)-hybridized carbon atoms (e.g., amide coupling, biaryl coupling) and lead to a prevalence of "flat" molecular structures with suboptimal physicochemical and topological properties4. Benzylic C(sp3)-H cross-coupling methods offer an appealing strategy to address this limitation by directly forming bonds to C(sp3)-hybridized carbon atoms, and emerging methods exhibit synthetic versatility that rivals conventional cross-coupling methods to access products with drug-like properties. Here, we use a virtual library of >350,000 benzylic ethers and ureas derived from benzylic C-H cross-coupling to test the widely held view that coupling at C(sp3)-hybridized carbon atoms affords products with improved three-dimensionality. The results show that the conformational rigidity of the benzylic scaffold strongly influences the product dimensionality. Products derived from flexible scaffolds often exhibit little or no improvement in three-dimensionality, unless they adopt higher energy conformations. This outcome introduces an important consideration when designing routes to topologically diverse molecular libraries. The concepts elaborated herein are validated experimentally through an informatics-guided synthesis of selected targets and the use of high-throughput experimentation to prepare a library of three-dimensional products that are broadly distributed across drug-like chemical space.

Octalithium, Tetrasodium, and Decalithium Compounds Based on Pyrrolyl Ligands: Synthesis, Structures, and Activation of the C-H Bonds of Pyrrolyl Rings and C═N Bonds of a Series of Ligands by Organolithium Reagents

The organometallic compounds of lithium ions have garnered continuous interest as indispensable precursors for the syntheses of organometallic complexes of main-group metals, transition metals, lanthanide metals, and actinide metals. In this work, we present a strategy for the preparation of a series of polynuclear lithium complexes. This methodology features the utilization of organolithium reagents both as metal sources to coordinate with the ligands and as nucleophilic reagents to undergo nucleophilic addition to the C═N bonds of the ligands. Reaction of a ligand HL1 [HL1 = 2-(((1-(2-(dimethylamino)ethyl)-1H-pyrrol-2-yl)methylene)amino)phenol] with n-BuLi produced complex [Li8(L1a)4]·1.5Tol (1·1.5Tol) [H2L1a = 2-((1-(1-(2-(dimethylamino)ethyl)-1H-pyrrol-2-yl)pentyl)amino)phenol]. One prominent feature regarding the formation of 1·1.5Tol is the occurrence of nucleophilic addition of n-BuLi to the C═N bond of HL1, leading to the generation of a new [L1a]2- ligand that contains both aminophenol and 1-(2-pyrrolyl)alkylamine scaffolds. The developed protocol can be adapted to a series of organolithium reagents. Compounds [Li8(L1b)4] (2) and [Li8(L1c)4] (3) were afforded by treatment of HL1 with sec-BuLi and LiCH2SiMe3, respectively. Reaction of an analogous ligand HL2 [HL2 = 2-(((1-(2-(dimethylamino)ethyl)-1H-pyrrol-2-yl)methylene)amino)-4-methylphenol] with n-BuLi generated compound [Li8(L2a)4] (4). C═N bond activation was not observed in the reaction of HL1 with NaOtBu, and the complex [Na4(L1)4]·Tol (5·Tol) was obtained. A decanuclear complex [Li10(L3a)2(L3b)2] (6) was also prepared via the reaction of HL3 [HL3 = 2-(2-((((1H-pyrrol-2-yl)methylene)amino)methyl)-1H-pyrrol-1-yl)-N,N-dimethylethan-1-amine] with t-BuLi. A remarkable feature in terms of the synthesis of 6 is the simultaneous occurrence of hydrogen atom abstraction from the C-H bond of the pyrrolyl ring and nucleophilic addition to the C═N bond of the HL3 ligand by t-BuLi. A series of amines containing biologically and physiologically important moieties were achieved by hydrolysis of the crude products from the reactions of the HL1-HL3 ligands and organolithium reagents. This work provides an efficient approach to high-nuclearity lithium compounds as well as a series of amines.

Broad-Scope Amination of Aryl Sulfamates Catalyzed by a Palladium Phosphine Complex

Among phenol-derived electrophiles, aryl sulfamates are attractive substrates since they can be employed as directing groups for C-H functionalization prior to catalysis. However, their use in C-N coupling is limited only to Ni catalysis. Here, we describe a Pd-based catalyst with a broad scope for the amination of aryl sulfamates. We show that the N-methyl-2-aminobiphenyl palladacycle supported by the PCyp2ArXyl2 ligand (Cyp = cyclopentyl; ArXyl2 = 2,6-bis(2,6-dimethylphenyl)phenyl) efficiently catalyzes the C-N coupling of aryl sulfamates with a variety of nitrogen nucleophiles, including anilines, primary and secondary alkyl amines, heteroaryl amines, N-heterocycles, and primary amides. DFT calculations support that the oxidative addition of the aryl sulfamate is the rate-determining step. The C-N coupling takes place through a cationic pathway in the polar protic medium.

Reductive Coupling of Nitroarenes and HCHO for General Synthesis of Functional Ethane-1,2-diamines by a Cobalt Single-Atom Catalyst

Despite the extensive applications, selective and diverse access to N,N'-diarylethane-1,2-diamines remains, to date, a challenge. Here, by developing a bifunctional cobalt single-atom catalyst (CoSA-N/NC), we present a general method for direct synthesis of such compounds via selective reductive coupling of cheap and abundant nitroarenes and formaldehyde, featuring good substrate and functionality compatibility, an easily accessible base metal catalyst with excellent reusability, and high step and atom efficiency. Mechanistic studies reveal that the N-anchored cobalt single atoms (CoN4) serve as the catalytically active sites for the reduction processes, the N-doped carbon support enriches the HCHO to timely trap the in situ formed hydroxyamines and affords the requisite nitrones under weak alkaline conditions, and the subsequent inverse electron demand 1,3-dipolar cycloaddition of the nitrones and imines followed by hydrodeoxygenation of the cycloadducts furnishes the products. In this work, the concept of catalyst-controlled nitroarene reduction to in situ create specific building blocks is anticipated to develop more useful chemical transformations.

Access and Modulation of Substituted Pyrrolo[3,4-c]pyrazole-4,6-(2H,5H)-diones

The first access to polyfunctionnalized pyrrolo[3,4-c]pyrazole-4,6-(2H,5H)-dione derivatives is reported. The series were generated from diethyl acetylenedicarboxylate and arylhydrazines, which afforded the key intermediates bearing two functional positions. The annellation to generate the maleimide moiety of the bicycle was studied. Moreover, an efficient palladium-catalyzed C-C and C-N bond formation via Suzuki-Miyaura or Buchwald-Hartwig coupling reactions in C-6 position was investigated from 6-chloropyrrolo[3,4-c]pyrazole-4,6-(2H,5H)-diones. This method provides novel access to various 1,6 di-substituted pyrrolo[3,4-c] pyrazole-4,6-(2H,5H)-diones.

Reductive Arylation of Nitroarenes with Chloroarenes: Reducing Conditions Enable New Reactivity from Palladium Catalysts

Palladium-catalyzed C-N bond forming reactions are a key tool in modern synthetic organic chemistry. Despite advances in catalyst design enabling the use of a variety of aryl (pseudo)halides, the necessary aniline coupling partner is often synthesized in a discrete reduction step from a nitroarene. An ideal synthetic sequence would avoid the necessity of this step while maintaining the reliable reactivity of palladium catalysis. Herein, we describe how reducing conditions enable new chemical steps and reactivity from well-studied palladium catalysts, resulting in a new, useful transformation: the reductive arylation of nitroarenes with chloroarenes to form diarylamines. Mechanistic experiments suggest that under reducing conditions, BrettPhos-palladium complexes catalyze the dual N-arylation of typically inert azoarenes─generated via the in situ reduction of nitroarenes─via two distinct mechanisms. Initial N-arylation proceeds via a novel association-reductive palladation sequence followed by reductive elimination to yield an intermediate 1,1,2-triarylhydrazine. Arylation of this intermediate by the same catalyst via a traditional amine arylation sequence forms a transient tetraarylhydrazine, unlocking reductive N-N bond cleavage to liberate the desired product. The resulting reaction allows for the synthesis of diarylamines bearing a variety of synthetically valuable functionalities and heteroaryl cores in high yield.

Iron-Catalyzed Intermolecular C-N Cross-Coupling Reactions via Radical Activation Mechanism

A concept for intermolecular C-N cross-coupling amination has been discovered using tetrazoles and aromatic and aliphatic azides with boronic acids under iron-catalyzed conditions. The amination follows an unprecedented metalloradical activation mechanism that is different from traditional metal-catalyzed C-N cross-coupling reactions. The scope of the reaction has been demonstrated by the employment of a large number of tetrazoles, azides, and boronic acids. Moreover, several late-stage aminations and a short synthesis of a drug candidate have been showcased for further synthetic utility. Collectively, this iron-catalyzed C-N cross-coupling should have wide applications in the context of medicinal chemistry, drug discovery, and pharmaceutical industries.

Applications of palladium-catalyzed C-N cross-coupling reactions in pharmaceutical compounds

C-N cross-coupling bond formation reactions have become valuable approaches to synthesizing anilines and their derivatives, known as important chemical compounds. Recent developments in this field have focused on versatile catalysts, simple operation methods, and green reaction conditions. This review article presents an overview of C-N cross-coupling reactions in pharmaceutical compound synthesis reports. Selected examples of N-arylation reactions of various nitrogen-based compounds and aryl halides are defined for preparing pharmaceutical molecules.

General cross-coupling reactions with adaptive dynamic homogeneous catalysis

Cross-coupling reactions are among the most important transformations in modern organic synthesis^1-3. Although the range of reported (het)aryl halides and nucleophile coupling partners is very large considering various protocols, the reaction conditions vary considerably between compound classes, necessitating renewed case-by-case optimization of the reaction conditions⁴. Here we introduce adaptive dynamic homogeneous catalysis (AD-HoC) with nickel under visible-light-driven redox reaction conditions for general C(sp²)-(hetero)atom coupling reactions. The self-adjustive nature of the catalytic system allowed the simple classification of dozens of various classes of nucleophiles in cross-coupling reactions. This is synthetically demonstrated in nine different bond-forming reactions (in this case, C(sp²)-S, Se, N, P, B, O, C(sp³, sp², sp), Si, Cl) with hundreds of synthetic examples under predictable reaction conditions. The catalytic reaction centre(s) and conditions differ from one another by the added nucleophile, or if required, a commercially available inexpensive amine base.

Visible-Light-Driven C-H Imidation of Arenes and Heteroarenes by a Phosphonium Ylide Organophotoredox Catalyst: Application to C-H Functionalization of Alkenes

Phosphonium ylide catalysis through an oxidative quenching cycle has been developed for visible-light-driven C-H imidation of arenes and heteroarenes. The present protocol could be applied not only to trihalomethylative lactonization reactions involving trifluoromethyl, trichloromethyl, and tribromomethyl radicals but also to the first example of an organophotoredox-catalyzed imidative lactonization reaction involving a nitrogen-centered electrophilic radical species.

A facile, one-pot reductive alkylation of aromatic and heteroaromatic amines in aqueous micellar media: a chemoenzymatic approach

A facile, green, selective and practical method for the catalytic N-alkylation of amines using molecular hydrogen as the reductant was developed. This procedure involves a lipase-mediated one-pot chemoenzymatic cascade wherein an amine undergoes a reductive amination with an aldehyde generated in situ. The imine formed thereby is reduced to give the corresponding amine. This process represents a convenient, environmentally benign and scalable one-pot process for the synthesis of N-alkyl amines. We report for the first time chemoenzymatic reductive alkylation in aqueous micellar media with an E-factor of 0.68.

Structural and conformational analysis of a biaryl phosphine integrating a calix[4]arene cavity. Can the phosphorus atom behave as an introverted donor?

The conformational preference of a cavity-based biaryl phosphine, namely 5-(2-diphenylphosphinyl-phenyl)-25,26,27,28-tetrapropyloxycalix[4]arene (L) has been investigated by density functional theory calculations. The analysis showed that the barrier to rotation about the C-C axle of the biaryl unit is only 10.7 kcal mol^-1, this rendering possible access to conformers of two types, those in which the P lone pair sits at the cavity entrance and points to the calixarene interior, others with a more open structure where the P atom is located outside the cavity. As revealed by a single crystal X-ray diffraction study, the biaryl phosphine appears virtually as an atropisomer in the solid state in which the phosphorus atom lies totally out of the cavity defined by the four phenoxy rings.

Insights into reactivity trends for electrochemical C-N bond formations

Electrochemical synthesis techniques are currently of great interest due to the possibility of synthesizing products while limiting reactant and energy input and providing potentially unique selectivity. Our group has previously reported the development of the "anion pool" synthesis method. As this is a new method for organic synthesis and the coupling of C-N bonds, it is important to understand the reactivity trends and limitations this method provides. In this report we explore the reactivity trends of a series of nitrogen-containing heterocycles under reductive electrochemical conditions. The results show that anionic nitrogen heterocycles are stable at room temperature in acetonitrile/electrolyte solutions up to a parent N-H pK_a value up to 23. Addition of carbon electrophiles to solutions containing the electrochemically generated anionic nitrogen heterocycles led to the C-N cross-coupling reactivity. Product yields tracked linearly with the pK_a value of the N-H bond of the heterocycles over 4 orders of acidity magnitude. Both benzylic halides and perfluorinated aromatics were found suitable for undergoing C-N cross-coupling with the anionic nitrogen heterocycles with product yields as high as 90%. It is also shown that the stability and reactivity of the anions are affected by the choice of electrolyte and temperature. Additionally, this procedure compares well to green chemistry processes in atom economy and PMI values.

Aryl fluorosulfates: powerful and versatile partners in cross-coupling reactions

Aryl fluorosulfates are versatile building blocks in organic synthesis and have gained increasing attention in SuFEx (Sulfur Fluoride Exchange) click chemistry. They are easily and conveniently prepared from phenols using sulfuryl fluoride SO₂F₂ as a low-cost sulfonyl fluoride provider. Recently, they served as less toxic and more atom economical alternatives to triflates in an impressive number of carbon-carbon and carbon-heteroatom cross-coupling reactions. In this review, we summarize the current advances and developments in applying aryl fluorosulfates as electrophilic partners in cross-coupling reactions.