Application of functionalized magnetic nanoparticles in sample preparation

Effective degradation of Di-n-butyl phthalate by reusable, magnetic Fe3O4 nanoparticle-immobilized Pseudomonas sp. W1 and its application in simulation

Di-n-butyl phthalate (DBP), one of the most widely used plasticizers, has been listed as a priority pollutant because of its toxicity to both humans and animals. In this study, Pseudomonas sp. W1, isolated from activated sludge, was capable of degrading 99.88% of DBP (1000 mg L^-1) within 8 days. We immobilized the W1 strain using Fe₃O₄ iron nanoparticles (IONPs) coated with poly-dopamine (PDA), and further evaluated its DBP degradation efficiency. The DBP degradation performance of W1 was improved by immobilization, exhibiting 99.69% of DBP degradation efficiency on the 6th day, which was 25.68% higher than un-immobilized W1. After three cycles of magnetic recycling and utilization, W1-PDA-IONPs retained 99.6% of their original efficiency. W1-PDA-IONPs were then used to degrade DBP in landfill leachate. When the proportion of raw leachate was ≤50%, DBP could be all degraded by W1-PDA-IONPs within 6 days. In 100% landfill leachate, DBP degradation efficiency after 10 days of incubation reached 66.40%. Furthermore, W1-PDA-IONPs cells in a simulated aeration system could be effectively magnetically separated at aeration rates from 60 to 600 mL min^-1. These results highlight the potential of W1-PDA-IONPs in the bioremediation of DBP-contaminated waste water.

Fabrication of chromium-imprinted polymer: a real magneto-selective sorbent for the removal of Cr(vi) ions in real water samples

Graphical representation (a and b) show the procedure for the synthesis of Cr(vi) ion-imprinted magnetic polymer.

Assessment of magnetic core-shell mesoporous molecularly imprinted polymers for selective recognition of triazoles residual levels in cucumber

Functional magnetic nanomaterials based on molecular imprinting technique were successfully prepared on the surface of modified Fe₃O₄. Transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FTIR), X-ray diffractometer, and vibrating sample magnetometry were applied for characterization of the synthesized magnetic nanoparticles. The magnetic molecularly imprinted polymers (MMIPs) exhibited satisfactory magnetic response, specific recognition, and excellent adsorption capacity toward triazoles (maximum adsorption capacity of 9202.9 μg g^-1 for triadimefon). The obtained MMIPs were further used as magnetic dispersive solid-phase extraction (MDSPE) coupled with liquid chromatography-tandem mass spectrometry (LC-MS/MS) for detection of 20 triazoles in cucumber spiked at different levels. The mean recoveries were ranged from 79.9% to 110.3% and relative standard deviations (RSDs) were <11.2% (n = 5). Herein, we report a simple, rapid, environmentally friendly, and magnetic stuff recyclable approach for triazoles residual analysis in complicated agricultural products.

Magnetic molecularly imprinted polymers for the detection of aminopyralid in milk using dispersive solid-phase extraction

A method for dummy molecular imprinting-magnetic dispersive solid-phase extraction (MI-MDSPE) coupled with liquid chromatography-tandem mass spectrometry (LC-MS/MS) was developed for the selective determination of aminopyralid in milk. The magnetic material and polymers were combined via a series of modifications in Fe3O4. Fe3O4@SiO2-NH2@MIP, Fe3O4@SiO2-COOH@MIP and two types of aminopyralid-specific magnetic molecularly imprinted polymers (MMIPs) were prepared on the surface of magnetic nanoparticles modified with amino and carboxyl groups. The morphology and magnetic properties of the polymer were characterized. Fe3O4@SiO2-NH2@MIP exhibits not only good dispersibility and magnetic properties, but also an outstanding recognition pattern to the target analyte. Adsorption experiments demonstrated that Fe3O4@SiO2-NH2@MIP, with a high specific surface area and fast mass transfer rate, had a higher affinity than Fe3O4@SiO2-COOH@MIP towards aminopyralid. Under the optimized MI-MDSPE conditions, the method had good linearity (R 2 > 0.9972), excellent recoveries (83.3-90%), and good precision (relative standard deviations (RSDs) < 12.6%). This method has limits of detection (LOD) and quantification (LOQ) of 0.231 and 0.77 μg kg-1, respectively, indicating that these MMIPs can be used to analyse trace levels of aminopyralid in real samples.

Novel sample preparation approaches in gas chromatographic analysis: Promising ideas

The development of sample preparation procedures is still a dynamic process despite a number of already proposed techniques. The main challenge in this research field is to fully replace classical procedures like liquid-liquid extraction and solid-phase extraction in gas chromatographic analysis. Some progress has been already achieved for the last 20 years when miniaturized techniques were incorporated in ISO standards. The current review is focused on novel approaches in sample treatment that appeared since 2010. It includes research studies describing non-conventional instrumental design available to inspire future progress in the field. A combination of a few extraction principles and supporting with additional treatment are the main core suggested for improvement of sample preparation efficiency. This requires good compatibility of extraction media, assessment of multiple experimental parameters, and potential automatization possibilities.

Applications of magnetic nanoparticles in surface-enhanced Raman scattering (SERS) detection of environmental pollutants

Environmental pollution, a major problem worldwide, poses considerable threat to human health and ecological environment. Efficient and reliable detection technologies, which focus on the appearance of emerging environmental and trace pollutants, are urgently needed. Surface-enhanced Raman scattering (SERS) has become an attractive analytical tool for sensing trace targets in environmental field because of its inherent molecular fingerprint specificity and high sensitivity. In this review, we focused on the recent developments in the integration of magnetic nanoparticles (MNPs) with SERS for facilitating sensitive detection of environmental pollutants. An overview and classification of different types of MNPs for SERS detection were initially provided, enabling us to categorize the huge amount of literature that was available in the interdisciplinary research field of MNPs based SERS technology. Then, the basic working principles and applications of MNPs in SERS detection were presented. Subsequently, the detection technologies integrating MNPs with SERS that eventually were used for the detection of various environmental pollutions were reviewed. Finally, the advantages of MNP-basedSERS detection technology for environmental pollutants were concluded, and the current challenges and future outlook of this technology in practical applications were highlighted. The application of the MNPs-basedSERS techniques for environmental analysis will be significantly advanced with the great progresses of the nanotechnologies, optics, and materials.

Magnetic nanostructures for preconcentration, speciation and determination of chromium ions: A review

Magnetic nanoparticles based solid-phase extraction is a new analytical technique based on the use of magnetic sorbents for the preconcentration and quantification of different inorganic and organic species. The present review concentrates on recent developments that have been built in magnetic nanostructures-based solid phase extraction, speciation and quantification of chromium ions. Besides, a description of the preparation, characterization as well as applications of various types of magnetic nanostructures, either with an inorganic or organic coating of the magnetic core, is presented. In addition, the most important analytical characteristics such as preconcentration factor, linear range, and limits of detection were carefully reported and compared. On the other hand, the removal of the chromium ions by magnetic solid phase extraction was not discussed in the review.

Functionalization of amino terminated carbon nanotubes with isocyanates for magnetic solid phase extraction of sulfonamides from milk and their subsequent determination by liquid chromatography-high resolution mass spectrometry

A simple modification method was developed for the functionalization of amino terminated carbon nanotubes (CNT-NH₂) by using isocyanates as modifiers via the nucleophilic addition reaction. Two types of functionalized magnetic carbon nanotubes (MCNT) were prepared through deposition of magnetic nanoparticles on CNT-NH₂ and modification with different isocyanates. p-Tolyl-functionalized MCNT (Tol-MCNT) with better adsorption performance were selected as adsorbent for magnetic solid phase extraction (MSPE), which could extract sulfonamides (SAs) from various milk samples with a enrichment factor of about 30 after optimization. By combining the MSPE with liquid chromatography-high resolution mass spectrometry (LC-HRMS), a new method was developed. Both skimmed and whole milk samples of three brands were analyzed with this method, and 4 SAs including sulfadiazine, sulfisomidine, sulfamethazine and sulfameter were detected with the concentration from unquantifiable to 72 ng/L, which were all well below the maximum residue limits in milk according to the regulations of China and EU.

Functional Mesoporous Silica Nanocomposites: Biomedical applications and Biosafety

The rise and development of nanotechnology has enabled the creation of a wide number of systems with new and advantageous features to treat cancer. However, in many cases, the lone application of these new nanotherapeutics has proven not to be enough to achieve acceptable therapeutic efficacies. Hence, to avoid these limitations, the scientific community has embarked on the development of single formulations capable of combining functionalities. Among all possible components, silica-either solid or mesoporous-has become of importance as connecting and coating material for these new-generation therapeutic nanodevices. In the present review, the most recent examples of fully inorganic silica-based functional composites are visited, paying particular attention to those with potential biomedical applicability. Additionally, some highlights will be given with respect to their possible biosafety issues based on their chemical composition.

The determination of pesticides in tea samples followed by magnetic multiwalled carbon nanotube-based magnetic solid-phase extraction and ultra-high performance liquid chromatography-tandem mass spectrometry

A simple and efficient method regarding ultrasound-assisted extraction combined with magnetic solid-phase extraction (UA-MSPE) by UHPLC-MS/MS was set up for the determination of three pesticides in tea leaf samples.

A bioinspired polydopamine approach toward the preparation of gold-modified magnetic nanoparticles for the magnetic solid-phase extraction of steroids in multiple samples

In this work, a simple, facile, and sensitive magnetic solid-phase extraction method was developed for the extraction and enrichment of three representative steroid hormones before high-performance liquid chromatography analysis. Gold-modified Fe₃ O₄ nanoparticles, as novel magnetic adsorbents, were prepared by a rapid and environmentally friendly procedure in which polydopamine served as the reductant as well as the stabilizer for the gold nanoparticles, thus successfully avoiding the use of some toxic reagents. To obtain maximum extraction efficiency, several significant factors affecting the preconcentration steps, including the amount of adsorbent, extraction time, pH of the sample solution, and the desorption conditions, were optimized, and the enrichment factors for three steroids were all higher than 90. The validity of the established method was evaluated and good analytical characteristics were obtained. A wide linearity range (0.8-500 μg/L for all the analytes) was attained with good correlation (R²  ≥ 0.991). The low limits of detection were 0.20-0.25 μg/L, and the relative standard deviations ranged from 0.83 to 4.63%, demonstrating a good precision. The proposed method was also successfully applied to the extraction and analysis of steroids in urine, milk, and water samples with satisfactory results, which showed its reliability and feasibility in real sample analysis.

Polyaniline-based adsorbents for removal of hexavalent chromium from aqueous solution: a mini review

Hexavalent chromium (Cr(VI)) is a common hazardous contaminant in the environment and carcinogenic or mutagenic to aquatic animals and human beings. Therefore, the removal and detoxification of Cr(VI) have been attracting increasing attention of researchers. Among various conducting polymers, polyaniline (PANI)-based adsorbents have shown an excellent performance on the removal of Cr(VI) because of their redox properties, eased synthesis, and favorable biocompatibility. In this review, the characteristics of various PANI-based adsorbents were described, including PANI-modified nanofiber mats and membranes, PANI/bio-adsorbents, PANI/magnetic adsorbents, PANI/carbon adsorbents, PANI-modified clay composites, and PANI-inorganic hybrid composites. The mechanisms for the detoxification and adsorption of Cr(VI) were also discussed. The results indicated the potential applications of PANI-based adsorbents for the removal of Cr(VI). Graphical abstract ᅟ.

Magnetic nanoparticle based solid-phase extraction of heavy metal ions: A review on recent advances

This review (with 151 refs) focuses on recent progress that has been made in magnetic nanoparticle-based solid phase extraction (SPE), pre-concentration and speciation of heavy metal ions. In addition, it discusses applications to complex real samples such as environmental, food, and biological matrices. The introduction addresses current obstacles and limitations associated with established SPE approaches and discusses the present state of the art in different formats of off-line and on-line SPE. The next section covers magnetized inorganic nanomaterials for use in SPE, with subsections on magnetic silica, magnetic alumina and titania, and on magnetic layered double oxides. A further section treats magnetized carbonaceous nanomaterials for use in SPE, with subsections on magnetic graphene and/or graphene oxides, magnetic carbon nanotubes and magnetic carbon nitrides. We then discuss the progress made in SPE based on the use of magnetized organic polymers (mainly non-imprinted and ion-imprinted polymer). This is followed by shorter sections on the use of magnetized metal organic frameworks, magnetized ionic liquids and magnetized biosorbents. All sections include discussions of the nanomaterials in terms of selectivity, sorption capacity, mechanisms of sorption and common routes for material synthesis. A concluding section addresses actual challenges and discusses perspective routes towards further improvements. Graphical abstract An overview on booster nanomaterials (ionic liquids, inorganic, organic and biological materials, and metal-organic frameworks) for use in magnetic nanoparticle-based solid-phase extraction of heavy metal ions.

Polypyrrole-modified magnetic multi-walled carbon nanotube-based magnetic solid-phase extraction combined with dispersive liquid–liquid microextraction followed by UHPLC-MS/MS for the analysis of sulfonamides in environmental water samples

Polypyrrole modified magnetic multi-walled carbon nanotubes were prepared and applied as an efficient adsorbent for magnetic solid-phase extraction.

Efficient extraction method using magnetic carbon nanotubes to analyze cocaine and benzoylecgonine in breast milk by GC/MS

Aim: The increasing use of cocaine (COC) during breastfeeding has led to growing concern about exposure of infants. Therefore, to study this exposure, a new method to analyze COC and benzoylecgonine in breast milk was developed. Methodology: A new extraction method was used for the first time to analyze COC and its major metabolite, benzoylecgonine, in breast milk using magnetic carbon nanotubes partially doped with nitrogen. Results: The calibration curves were linear in the range 5.0–180.0 ng ml-1. The limit of quantification was 5.0 ng ml-1. Coefficients of variation were between 3.2 and 13.9%. Recovery was between 89.6 and 99.2%. Conclusion: The proposed method is simple, efficient and suitable to determine analytes in breast milk.