Stem cells and tooth tissue engineering

In vitro differentiation and mineralization of dental pulp stem cells on enamel-like fluorapatite surfaces

Our previous studies have shown good biocompatibility of fluorapatite (FA) crystal surfaces in providing a favorable environment for functional cell-matrix interactions of human dental pulp stem cells (DPSCs) and also in supporting their long-term growth. The aim of the current study was to further investigate whether this enamel-like surface can support the differentiation and mineralization of DPSCs, and, therefore, act as a potential model for studying the enamel/dentin interface and, perhaps, dentine/pulp regeneration in tooth tissue engineering. The human pathway-focused osteogenesis polymerase chain reaction (PCR) array demonstrated that the expression of osteogenesis-related genes of human DPSCs was increased on FA surfaces compared with that on etched stainless steel (SSE). Consistent with the PCR array, FA promoted mineralization compared with the SSE surface with or without the addition of a mineralization promoting supplement (MS). This was confirmed by alkaline phosphatase (ALP) staining, Alizarin red staining, and tetracycline staining for mineral formation. In conclusion, FA crystal surfaces, especially ordered (OR) FA surfaces, which mimicked the physical architecture of enamel, provided a favorable extracellular matrix microenvironment for the cells. This resulted in the differentiation of human DPSCs and mineralized tissue formation, and, thus, demonstrated that it may be a promising biomimetic model for dentin-pulp tissue engineering.

Neural crest stem cells from dental tissues: a new hope for dental and neural regeneration

Several stem cell sources persist in the adult human body, which opens the doors to both allogeneic and autologous cell therapies. Tooth tissues have proven to be a surprisingly rich and accessible source of neural crest-derived ectomesenchymal stem cells (EMSCs), which may be employed to repair disease-affected oral tissues in advanced regenerative dentistry. Additionally, one area of medicine that demands intensive research on new sources of stem cells is nervous system regeneration, since this constitutes a therapeutic hope for patients affected by highly invalidating conditions such as spinal cord injury, stroke, or neurodegenerative diseases. However, endogenous adult sources of neural stem cells present major drawbacks, such as their scarcity and complicated obtention. In this context, EMSCs from dental tissues emerge as good alternative candidates, since they are preserved in adult human individuals, and retain both high proliferation ability and a neural-like phenotype in vitro. In this paper, we discuss some important aspects of tissue regeneration by cell therapy and point out some advantages that EMSCs provide for dental and neural regeneration. We will finally review some of the latest research featuring experimental approaches and benefits of dental stem cell therapy.

Identification of novel transcription-regulating genes expressed during murine molar development

BACKGROUND

The mechanism of tooth development is a complex process regulated by numerous genes including transcription factors, growth factors, and other intra- and extracellular molecules. Especially, transcription factors play a central role in gene expression, regulating a wide spectrum of biological processes including organogenesis. Substantial evidence has been demonstrated by a number of studies using genetically engineered animal models. However, detailed molecular mechanisms of tooth development have not been completely elucidated, partially because numerous genes that play essential roles in tooth development remain unidentified.

RESULTS

In this study, we conducted an expression-based screening using gene expression database and in situ hybridization assays. Based on the gene expression database "EMBRYS," 207 out of 1,520 genes were expressed in the maxillary and/or mandibular processes and thus were selected for further analysis by section in situ hybridization. Among these candidates, 28 genes were newly identified as potential factors associated with tooth development by in situ hybridization assays with frontal sections of embryonic day 13.5 and 14.5 mouse embryos. The expression patterns were also examined at embryonic day 16.5 and 18.5.

CONCLUSIONS

These results will contribute to elucidating the mechanisms of tooth development and to improving the technology for regeneration of tooth.

Tooth Tissue Engineering: Potential and Pitfalls

All over the world a large number of people suffer from tooth diseases like dental caries, tooth abscess, and plaques. Tooth loss or damage, which occurs frequently in our society are generally repaired by applying several conventional methods, such as root-canal treatment, direct pulp capping and dental implants. These methods are quite painful, create damage to the surrounding tooth tissues and also may at times have adverse side-effects. The limitations of the conventional methods can be overcome by applying the concept of tooth tissue engineering. Tooth tissue engineering is the application of biosciences and engineering to regenerate a biofunctional tooth, which can be used to replace the missing tooth or repair the damaged tooth. Tissue engineering involves three key elements - cell, scaffold and growth factors, which interact with each other to regenerate a specific tissue. The success of tissue engineering depends on the proper selection of these three key elements and understanding the interactions among them. To bring us close to the realization of a tissue-engineered tooth, immense progress is going on in understanding how tooth is first developed, and there is a good advancement in tooth regeneration. In this review, “tooth tissue engineering” will be discussed, along with the recent advancements and challenges in bring a biofunctional tooth from laboratory out into clinical use.

In vitro evaluation of the odontogenic potential of mouse undifferentiated pulp cells

The aim of this study was to evaluate the odontogenic potential of undifferentiated pulp cells (OD-21 cell line) through chemical stimuli in vitro. Cells were divided into uninduced cells (OD-21), induced cells (OD-21 cultured in supplemented medium/OD-21+OM) and odontoblast-like cells (MDPC-23 cell line). After 3, 7, 10 and 14 days of culture, it was evaluated: proliferation and cell viability, alkaline phosphatase activity, total protein content, mineralization, immunolocalization of dentin matrix acidic phosphoprotein 1 (DMP1), alkaline phosphatase (ALP) and osteopontin (OPN) and quantification of genes ALP, OSTERIX (Osx), DMP1 and runt-related transcription factor 2 (RUNX2) through real-time polymerase chain reaction (PCR). Data were analyzed by Kruskal-Wallis and Mann-Whitney U tests (p<0.05). There was a decrease in cell proliferation in OD-21 + OM, whereas cell viability was similar in all groups, except at 7 days. The amount of total protein was higher in group OD-21 + OM in all periods; the same occurred with ALP activity after 10 days when compared with OD-21, with no significant differences from the MDPC-23 group. Mineralization was higher in OD-21+OM when compared with the negative control. Immunolocalization demonstrated that DMP1 and ALP were highly expressed in MDPC-23 cells and OD-21 + OM cells, whereas OPN was high in all groups. Real-time PCR revealed that DMP1 and ALP expression was higher in MDPC-23 cell cultures, whereas RUNX2 was lower for these cells and higher for OD-21 negative control. Osx expression was lower for OD-21 + OM. These results suggest that OD-21 undifferentiated pulp cells have odontogenic potential and could be used in dental tissue engineering.

Potential for neural differentiation of mesenchymal stem cells

Adult human stem cells have gained progressive interest as a promising source of autologous cells to be used as therapeutic vehicles. Particularly, mesenchymal stem cells (MSCs) represent a great tool in regenerative medicine because of their ability to differentiate into a variety of specialized cells. Among adult tissues in which MSCs are resident, adipose tissue has shown clear advantages over other sources of MSCs (ease of surgical access, availability, and isolation), making adipose tissue the ideal large-scale source for research on clinical applications. Stem cells derived from the adipose tissue (adipose-derived stem cells = ADSCs) possess a great and unique regenerative potential: they are self-renewing and can differentiate along several mesenchymal tissue lineages (adipocytes, osteoblasts, myocytes, chondrocytes, endothelial cells, and cardiomyocytes), among which neuronal-like cells gained particular interest. In view of the promising clinical applications in tissue regeneration, research has been conducted towards the creation of a successful protocol for achieving cells with a well-defined neural phenotype from adipose tissue. The promising results obtained open new scenarios for innovative approaches for a cell-based treatment of neurological degenerative disorders.

Morphogenesis and bone integration of the mouse mandibular third molar

The mouse third molar (M3) develops postnatally and is thus a unique model for studying the integration of a non-mineralized tooth with mineralized bone. This study assessed the morphogenesis of the mouse M3, related to the alveolar bone, comparing M3 development with that of the first molar (M1), the most common model in odontogenesis. The mandibular M3 was evaluated from initiation to eruption by morphology and by assessing patterns of proliferation, apoptosis, osteoclast distribution, and gene expression. Three-dimensional reconstruction and explant cultures were also used. Initiation of M3 occurred perinatally, as an extension of the second molar (M2) which grew into a region of soft mesenchymal tissue above the M2, still far away from the alveolar bone. The bone-free M3 bud gradually became encapsulated by bone at the cap stage at postnatal day 3. Osteoclasts were first visible at postnatal day 4 when the M3 came into close contact with the bone. The number of osteoclasts increased from postnatal day 8 to postnatal day 12 to form a space for the growing tooth. The M3 had erupted by postnatal day 26. The M3, although smaller than the M1, passed through the same developmental stages over a similar time span but showed differences in initiation and in the timing of bone encapsulation.

Natural mineralized scaffolds promote the dentinogenic potential of dental pulp stem cells via the mitogen-activated protein kinase signaling pathway

The selection of a suitable scaffold material is important for dentin tissue regeneration, as the characteristics of biomaterials can potentially influence cell proliferation and differentiation. We compared the effects of different scaffolds on dentin regeneration based on dental pulp stem cells (DPSCs) and investigated the regulatory mechanisms of odontogenic differentiation of DPSCs by these scaffolds. Five different scaffolds were tested: demineralized dentin matrix (DDM), ceramic bovine bone (CBB), small intestinal submucosa (SIS), poly-L-lactate-co-glycolate, and collagen-chondroitin sulfate-hyaluronic acid. DPSCs cultured on DDM and CBB exhibited higher levels of alkaline phosphatase (ALP) activity and mRNA expression of bone sialoprotein, osteocalcin, dentin sialophosphoprotein (DSPP), and dentin matrix protein-1 (DMP-1) than those cultured on the other three scaffolds. Further, the phosphorylation levels of mitogen-activated protein kinase (MAPK) ERK1/2 and p38 in DPSCs cultured on DDM and CBB were also significantly enhanced compared with the other three scaffolds, and their inhibitors significantly inhibited odontogenic differentiation as assessed by ALP activity and mRNA expression of DSPP and DMP-1. The implantation experiment confirmed these results and showed a large amount of regular-shaped dentin-pulp complex tissues, including dentin, predentin, and odontoblasts only in the DDM and CBB groups. The results indicated that natural mineralized scaffolds (DDM and CBB) have potential as attractive scaffolds for dentin tissue-engineering-promoted odontogenic differentiation of DPSCs through the MAPK signaling pathway.

[Biological dental implant: myth or reality?]

The currently available options for tooth-loss are prostheses, implants, or surgery (auto-transplantation). They all have their limitations. The emergence of tissue engineering, 15 years ago, was made possible by a better knowledge of the various stages of dental development, and the mastery of stem cell differentiation. It opened a new alternative approach for tooth regeneration. Even if animal experiments have demonstrated that it was possible to obtain a biological tooth from stem cells, two major issues remain to be discussed. Is it possible to use induced pluripotent stem cells instead of embryonic stem cells, which raise an ethical problem? Is it possible to reproduce a dental crown with an adapted shape and colour? Or should we consider the simpler creation of a biological root secondarily covered by a ceramic prosthesis? Our study mentions the main landmarks and the key cells involved in the embryological development of the tooth, establishes a mapping and a list of the various types of stem cells. It details the various methods used to create a biological implant.

Mesenchymal and embryonic characteristics of stem cells obtained from mouse dental pulp

OBJECTIVE

Several studies have demonstrated that human dental pulp is a source of mesenchymal stem cells. To better understand the biological properties of these cells we isolated and characterized stem cells from the dental pulp of EGFP transgenic mice.

METHODS

The pulp tissue was gently separated from the roots of teeth extracted from C57BL/6 mice, and cultured under appropriate conditions. Flow cytometry, RT-PCR, light microscopy (staining for alkaline phosphatase) and immunofluorescence were used to investigate the expression of stem cell markers. The presence of chromosomal abnormalities was evaluated by G banding.

RESULTS

The mouse dental pulp stem cells (mDPSC) were highly proliferative, plastic-adherent, and exhibited a polymorphic morphology predominantly with stellate or fusiform shapes. The presence of cell clusters was observed in cultures of mDPSC. Some cells were positive for alkaline phosphatase. The karyotype was normal until the 5th passage. The Pou5f1/Oct-4 and ZFP42/Rex-1, but not Nanog transcripts were detected in mDPSC. Flow cytometry and fluorescence analyses revealed the presence of a heterogeneous population positive for embryonic and mesenchymal cell markers. Adipogenic, chondrogenic and osteogenic differentiation was achieved after two weeks of cell culture under chemically defined in vitro conditions. In addition, some elongated cells spontaneously acquired a contraction capacity.

CONCLUSIONS

Our results reinforce that the dental pulp is an important source of adult stem cells and encourage studies on therapeutic potential of mDPSC in experimental disease models.

Tissue engineering approaches for regenerative dentistry

Although teeth can withstand enormous abrasive forces, they are susceptible to damage due to trauma, acids and bacterial attack. Conventional treatment relies on synthetic materials to fill defects and replace whole teeth, but these remain substitutes and cannot restore the tissues' physiological architecture and function. With the isolation of postnatal stem cells from various sources in the oral cavity and the development of smart materials for cell and growth factor delivery, possibilities for alternative, biology-based treatments arise. Interdisciplinary approaches are needed to move from replacement to regeneration, involving clinicians as well as biologists, stem cell researchers and material scientists. First, in order to provide an appreciation for the complexity of the tooth as a whole, its components and surrounding structures will be described. Next, the basic principles of tooth development will be presented, which can be applied to recreate signaling events and utilize them to build whole teeth. For the regeneration of individual tooth structures, the classical tissue engineering triad can be utilized, using dental stem cells, scaffold materials and relevant growth and differentiation factors. Recent successful engineering initiatives on whole teeth as well as on specific tissues such as enamel, the dentin-pulp complex or periodontal ligament will be discussed. In projecting future research directions, we conclude with a brief discussion of key components necessary to develop effective strategies for dental tissue engineering, which might enable us to implement novel regenerative strategies in clinical practice in the near future.

Tooth-bone morphogenesis during postnatal stages of mouse first molar development

The first mouse molar (M1) is the most common model for odontogenesis, with research particularly focused on prenatal development. However, the functional dentition forms postnatally, when the histogenesis and morphogenesis of the tooth is completed, the roots form and the tooth physically anchors into the jaw. In this work, M1 was studied from birth to eruption, assessing morphogenesis, proliferation and apoptosis, and correlating these with remodeling of the surrounding bony tissue. The M1 completed crown formation between postnatal (P) days 0-2, and the development of the tooth root was initiated at P4. From P2 until P12, cell proliferation in the dental epithelium reduced and shifted downward to the apical region of the forming root. In contrast, proliferation was maintained or increased in the mesenchymal cells of the dental follicle. At later stages, before tooth eruption (P20), cell proliferation suddenly ceased. This withdrawal from the cell cycle correlated with tooth mineralization and mesenchymal differentiation. Apoptosis was observed during all stages of M1 postnatal morphogenesis, playing a role in the removal of cells such as osteoblasts in the mandibular region and working together with osteoclasts to remodel the bone around the developing tooth. At more advanced developmental stages, apoptotic cells and bodies accumulated in the cell layers above the tooth cusps, in the path of eruption. Three-dimensional reconstruction of the developing postnatal tooth and bone indicates that the alveolar crypts form by resorption underneath the primordia, whereas the ridges form by active bone growth between the teeth and roots to form a functional complex.

Tooth engineering: searching for dental mesenchymal cells sources

The implantation of cultured re-associations between embryonic dental mesenchymal cells and epithelial cells from mouse molars at embryonic day 14 (ED14) allowed making full teeth with crown, root, periodontal ligament fibers, and bone. Although representing valuable tools to set up methodologies embryonic cells are not easily available. This work thus aimed to replace the embryonic cells by dental mesenchymal cell lines or cultured expanded embryonic cells, and to test their ability to mediate tooth development in vitro when re-associated with a competent dental epithelium. Histology, immunostaining and RT-PCR allowed getting complementary sets of results. Two different immortalized cell lines from ED18 dental mesenchyme failed in mediating tooth formation. The potentialities of embryonic dental mesenchymal cells decreased from ED14 to ED16 and were lost at ED18. This is likely related to a change in the mesenchymal cell phenotype and/or populations during development. Attempts to cultivate ED14 or ED16 embryonic dental mesenchymal cells prior to re-association led to the loss of their ability to support tooth development. This was accompanied by a down-regulation of Fgf3 transcription. Supplementation of the culture medium with FGF2 allowed restoring Fgf3 expression, but not the ability of mesenchymal cells to engage in tooth formation. Altogether, these observations suggest that a competent cell population exists in the dental mesenchyme at ED14, progressively decreases during development, and cannot as such be maintained in vitro. This study evidenced the need for specific conditions to maintain the ability of dental mesenchymal cells to initiate whole tooth formation, when re-associated with an odontogenic epithelium. Efforts to improve the culture conditions will have to be combined with attempts to characterize the competent cells within the dental mesenchyme.

Dental pulp and dentin tissue engineering and regeneration: advancement and challenge

Hard tissue is difficult to repair especially dental structures. Tooth enamel is incapable of self-repairing whereas dentin and cementum can regenerate with limited capacity. Enamel and dentin are commonly under the attack by caries. Extensive forms of caries destroy enamel and dentin and can lead to dental pulp infection. Entire pulp amputation followed by the pulp space disinfection and filling with an artificial rubber-like material is employed to treat the infection -- commonly known as root canal or endodontic therapy. Regeneration of dentin relies on having vital pulps; however, regeneration of pulp tissue has been difficult as the tissue is encased in dentin without collateral blood supply except from the root apical end. With the advent of modern tissue engineering concept and the discovery of dental stem cells, regeneration of pulp and dentin has been tested. This article will review the recent endeavor on pulp and dentin tissue engineering and regeneration. The prospective outcomes of current advancements and challenges in this line of research are discussed.

Biological approaches toward dental pulp regeneration by tissue engineering

Root canal therapy has been the predominant approach in endodontic treatment, wherein the entire pulp is cleaned out and replaced with a gutta-percha filling. However, living pulp is critical for the maintenance of tooth homeostasis and essential for tooth longevity. An ideal form of therapy, therefore, might consist of regenerative approaches in which diseased/necrotic pulp tissues are removed and replaced with regenerated pulp tissues to revitalize the teeth. Dental pulp regeneration presents one of the most challenging issues in regenerative dentistry due to the poor intrinsic ability of pulp tissues for self-healing and regrowth. With the advent of modern tissue engineering and the discovery of dental stem cells, biological therapies have paved the way to utilize stem cells, delivered or internally recruited, to generate dental pulp tissues, where growth factors and a series of dentine extracellular matrix molecules are key mediators that regulate the complex cascade of regeneration events to be faithfully fulfilled.

Porcine tooth germ cell conditioned medium can induce odontogenic differentiation of human dental pulp stem cells

It is suggested that the differentiation of tooth-derived stem cells is modulated by the local microenvironment in which they reside. Previous studies have indicated that tooth germ cell-conditioned medium (TGC-CM) holds the potential to induce dental pulp stem cells (DPSCs) to differentiate into the odontogenic lineage. Nevertheless, human TGC-CM (hTGC-CM) is not feasible in practical application, so we conjectured that xenogenic TGC-CM might exert a similar influence on human dental stem cells. In this study, we chose swine as the xenogenic origin and compared the effect of porcine tooth germ cell-conditioned medium (pTGC-CM) with its human counterpart on human DPSCs. Morphological appearance, colony-forming assay, in vitro multipotential ability, protein and gene expression of the odontogenic phenotype and the in vivo differentiation capacity of DPSCs were evaluated. The results showed that pTGC-CM exerted a similar effect to hTGC-CM in inducing human DPSCs to present odontogenic changes, which were indicated by remarkable morphological changes, higher multipotential capability and the expression of some odontogenic markers in gene and protein levels. Besides, the in vivo results showed that pTGC-CM-treated DPSCs, similar to hTGC-CM-treated DPSCs, could form a more regular dentine-pulp complex. Our data provided the first evidence that pTGC-CM is able to exert almost the same effect on DPSCs with hTGC-CM. The observations suggest that the application of xenogenic TGC-CM may facilitate generating bioengineered teeth from tooth-derived stem cells in future.

Periodontal tissue engineering and regeneration: current approaches and expanding opportunities

The management of periodontal tissue defects that result from periodontitis represents a medical and socioeconomic challenge. Concerted efforts have been and still are being made to accelerate and augment periodontal tissue and bone regeneration, including a range of regenerative surgical procedures, the development of a variety of grafting materials, and the use of recombinant growth factors. More recently, tissue-engineering strategies, including new cell- and/or matrix-based dimensions, are also being developed, analyzed, and employed for periodontal regenerative therapies. Tissue engineering in periodontology applies the principles of engineering and life sciences toward the development of biological techniques that can restore lost alveolar bone, periodontal ligament, and root cementum. It is based on an understanding of the role of periodontal formation and aims to grow new functional tissues rather than to build new replacements of periodontium. Although tissue engineering has merged to create more opportunities for predictable and optimal periodontal tissue regeneration, the technique and design for preclinical and clinical studies remain in their early stages. To date, the reconstruction of small- to moderate-sized periodontal bone defects using engineered cell-scaffold constructs is technically feasible, and some of the currently developed concepts may represent alternatives for certain ideal clinical scenarios. However, the predictable reconstruction of the normal structure and functionality of a tooth-supporting apparatus remains challenging. This review summarizes current regenerative procedures for periodontal healing and regeneration and explores their progress and difficulties in clinical practice, with particular emphasis placed upon current challenges and future possibilities associated with tissue-engineering strategies in periodontal regenerative medicine.

Formation of the tooth-bone interface

Not only are teeth essential for mastication, but also missing teeth are considered a social handicap due to speech and aesthetic problems, with a resulting high impact on emotional well-being. Several treatment procedures are currently available for tooth replacement with mostly inert prosthetic materials and implants. Natural tooth substitution based on copying the developmental process of tooth formation is particularly challenging and creates a rapidly developing area of molecular dentistry. In any approach, functional interactions among the tooth, the surrounding bone, and the periodontium must be established. Therefore, recent research in craniofacial genetics searches for mechanisms responsible for correct cell and tissue interactions, not only within a specific structure, but also in the context of supporting structures. A tooth crown that is not functionally anchored to roots and bone is useless. This review aims to summarize the developmental and tissue homeostatic aspects of the tooth-bone interface, from the initial patterning toward tooth eruption and lifelong interactions between the tooth and its surrounding alveolar bone.

Pulp and dentin tissue engineering and regeneration: current progress

Dental pulp tissue is vulnerable to infection. Entire pulp amputation followed by pulp-space disinfection and filling with an artificial rubber-like material is employed to treat the infection - commonly known as root-canal therapy. Regeneration of pulp tissue has been difficult as the tissue is encased in dentin without collateral blood supply except from the root apical end. However, with the advent of the concept of modern tissue engineering and the discovery of dental stem cells, regeneration of pulp and dentin has been tested. This article will review the early attempts to regenerate pulp tissue and the current endeavor of pulp and dentin tissue engineering, and regeneration. The prospective outcome of the current advancement in this line of research will be discussed.

Engineering craniofacial structures: facing the challenge

The human innate regenerative ability is known to be limited by the intensity of the insult together with the availability of progenitor cells, which may cause certain irreparable damage. It is only recently that the paradigm of tissue engineering found its way to the treatment of irreversibly affected body structures with the challenge of reconstructing the lost part. In the current review, we underline recent trials that target engineering of human craniofacial structures, mainly bone, cartilage, and teeth. We analyze the applied engineering strategies relative to the selection of cell types to lay down a specific targeted tissue, together with their association with an escorting scaffold for a particular engineered site, and discuss their necessity to be sustained by growth factors. Challenges and expectations for facial skeletal engineering are discussed in the context of future treatment.

Human dental pulp stem cells with highly angiogenic and neurogenic potential for possible use in pulp regeneration

Dental caries is a common public health problem, causing early loss of dental pulp and resultant tooth loss. Dental pulp has important functions to sustain teeth providing nutrient and oxygen supply, innervation, reactionary/reparative dentin formation and immune response. Regeneration of pulp is an unmet need in endodontic therapy, and angiogenesis/vasculogenesis and neurogenesis are critical for pulp regeneration. Permanent and deciduous pulp tissue is easily available from teeth after extraction without ethical issues and has potential for clinical use. In this review, we introduce some stem cell subfractions, CD31(-)/CD146(-) SP cells and CD105(+) cells with high angiogenic and neurogenic potential, derived from human adult dental pulp tissue. Potential utility of these cells is addressed as a source of cells for treatment of cerebral and limb ischemia and pulp inflammation complete with angiogenesis and vasculogenesis.

Mesenchymal stem cells derived from dental tissues vs. those from other sources: their biology and role in regenerative medicine

To date, 5 different human dental stem/progenitor cells have been isolated and characterized: dental pulp stem cells (DPSCs), stem cells from exfoliated deciduous teeth (SHED), periodontal ligament stem cells (PDLSCs), stem cells from apical papilla (SCAP), and dental follicle progenitor cells (DFPCs). These postnatal populations have mesenchymal-stem-cell-like (MSC) qualities, including the capacity for self-renewal and multilineage differentiation potential. MSCs derived from bone marrow (BMMSCs) are capable of giving rise to various lineages of cells, such as osteogenic, chondrogenic, adipogenic, myogenic, and neurogenic cells. The dental-tissue-derived stem cells are isolated from specialized tissue with potent capacities to differentiate into odontogenic cells. However, they also have the ability to give rise to other cell lineages similar to, but different in potency from, that of BMMSCs. This article will review the isolation and characterization of the properties of different dental MSC-like populations in comparison with those of other MSCs, such as BMMSCs. Important issues in stem cell biology, such as stem cell niche, homing, and immunoregulation, will also be discussed.

Crown formation during tooth development and tissue engineering

Considering tooth crown engineering, three main parameters have to be taken into account: (1) the relationship between crown morphology and tooth functionality, (2) the growth of the organ, which is hardly compatible with the use of preformed scaffolds, and (3) the need for easily available nondental competent cell sources. In vitro reassociation experiments using either dental tissues or bone marrow-derived cells (BMDC) have been designed to get information about the mechanisms to be preserved in order to allow crown engineering. As the primary enamel knot (PEK) is involved in signaling crown morphogenesis, the formation and fate of this structure was investigated (1) in heterotopic reassociations between embryonic day 14 (ED14) incisor and molar enamel organs and mesenchymes, and (2) in reassociations between ED14 molar enamel organs and BMDC. A PEK formed in cultured heterotopic dental tissue reassociations. The mesenchyme controls the fate of the EK cells, incisor or molar-specific using apoptosis as criterion, and functionality to drive single/multiple cusps tooth development. Although previous investigations showed that they might differentiate as odontoblast- or ameloblast-like cells, BMDC reassociated to an enamel organ could not support the development of multicusp teeth. These cells apparently could neither maintain nor stimulate the formation of a PEK.

Applications of microscale technologies for regenerative dentistry

While widespread advances in tissue engineering have occurred over the past decade, many challenges remain in the context of tissue engineering and regeneration of the tooth. For example, although tooth development is the result of repeated temporal and spatial interactions between cells of ectoderm and mesoderm origin, most current tooth engineering systems cannot recreate such developmental processes. In this regard, microscale approaches that spatially pattern and support the development of different cell types in close proximity can be used to regulate the cellular microenvironment and, as such, are promising approaches for tooth development. Microscale technologies also present alternatives to conventional tissue engineering approaches in terms of scaffolds and the ability to direct stem cells. Furthermore, microscale techniques can be used to miniaturize many in vitro techniques and to facilitate high-throughput experimentation. In this review, we discuss the emerging microscale technologies for the in vitro evaluation of dental cells, dental tissue engineering, and tooth regeneration.

Odontogenic potential of post-natal oral mucosal epithelium

A bioengineered tooth would provide a powerful alternative to currently available clinical treatments. Previous experiments have succeeded in bioengineering teeth using tooth germs from animal embryos. However, the ultimate goal is to develop a technology which enables teeth to be regenerated with the use of autologous cells. To pursue this goal, we re-associated the palatal epithelium from young mice with the odontogenic dental mesenchyme and transplanted the re-associated tissues into mouse kidney capsules. Morphologically defined teeth were formed from the re-associated cultured palatal epithelial cell sheets from mice aged up to 4 wks, but no tooth was formed when the palatal epithelium from mice after 2 days of age was directly re-associated. Our results demonstrated that post-natal non-dental oral mucosal epithelium can be used as a substitute for dental epithelium, and that epithelial cell sheet improves the ability of the oral epithelium of older mice to differentiate into dental epithelium.

Dental-derived Stem Cells and whole Tooth Regeneration: an Overview

The need for new dental tissue-replacement therapies is evident in recent reports which reveal startling statistics regarding the high incidence of tooth decay and tooth loss. Recent advances in the identification and characterization of dental stem cells, and in dental tissue-engineering strategies, suggest that bioengineering approaches may successfully be used to regenerate dental tissues and whole teeth. Interest in dental tissue-regeneration applications continues to increase as clinically relevant methods for the generation of bioengineered dental tissues, and whole teeth, continue to improve. This paper is concerned about dental-derived stem cells and their characterization. Additionally, since conventional dental treatments partially serve the purpose for replacing missing teeth and always include possible failure rates, the potential of dental-derived stem cells in promoting whole tooth regeneration is also discussed.

KEYWORDS

Dental stem cells; Tissue engineering; Tooth regeneration.

A curriculum vitae of teeth: evolution, generation, regeneration

The ancestor of recent vertebrate teeth was a tooth-like structure on the outer body surface of jawless fishes. Over the course of 500,000,000 years of evolution, many of those structures migrated into the mouth cavity. In addition, the total number of teeth per dentition generally decreased and teeth morphological complexity increased. Teeth form mainly on the jaws within the mouth cavity through mutual, delicate interactions between dental epithelium and oral ectomesenchyme. These interactions involve spatially restricted expression of several, teeth-related genes and the secretion of various transcription and signaling factors. Congenital disturbances in tooth formation, acquired dental diseases and odontogenic tumors affect millions of people and rank human oral pathology as the second most frequent clinical problem. On the basis of substantial experimental evidence and advances in bioengineering, many scientists strongly believe that a deep knowledge of the evolutionary relationships and the cellular and molecular mechanisms regulating the morphogenesis of a given tooth in its natural position, in vivo, will be useful in the near future to prevent and treat teeth pathologies and malformations and for in vitro and in vivo teeth tissue regeneration.

Vascularization of engineered teeth

The implantation of cultured dental cell-cell re-associations allows for the reproduction of fully formed teeth, crown morphogenesis, epithelial histogenesis, mineralized dentin and enamel deposition, and root-periodontium development. Since vascularization is critical for organogenesis and tissue engineering, this work aimed to study: (a) blood vessel formation during tooth development, (b) the fate of blood vessels in cultured teeth and re-associations, and (c) vascularization after in vivo implantation. Ex vivo, blood vessels developed in the dental mesenchyme from the cap to bell stages and in the enamel organ, shortly before ameloblast differentiation. In cultured teeth and re-associations, blood-vessel-like structures remained in the peridental mesenchyme, but never developed into dental tissues. After implantation, both teeth and re-associations became revascularized, although later in the case of the re-associations. In implanted re-associations, newly formed blood vessels originated from the host, allowing for their survival, and affording conditions organ growth, mineralization, and enamel secretion.

Capacity of dental pulp differentiation in mouse molars as demonstrated by allogenic tooth transplantation

Dental pulp elaborates both bone and dentin under pathological conditions such as tooth replantation/transplantation. This study aims to clarify the capability of dental pulp to elaborate bone tissue in addition to dentin by allogenic tooth transplantation using immunohistochemistry and histochemistry. After extraction of the molars of 3-week-old mice, the roots and pulp floor were resected and immediately allografted into the sublingual region in a littermate. In addition, we studied the contribution of donor and host cells to the regenerated pulp tissue using a combination of allogenic tooth transplantation and lacZ transgenic ROSA26 mice. On Days 5-7, tubular dentin formation started next to the preexisting dentin at the pulp horn where nestin-positive odontoblast-like cells were arranged. Until Day 14, bone-like tissue formation occurred in the pulp chamber, where intense tartrate-resistant acid phosphatase-positive cells appeared. Furthermore, allogenic transplantation using ROSA26 mice clearly showed that both donor and host cells differentiated into osteoblast-like cells with the assistance of osteoclast-lineage cells, whereas newly differentiated odontoblasts were exclusively derived from donor cells. These results suggest that the odontoblast and osteoblast lineage cells reside in the dental pulp and that both donor and host cells contribute to bone-like tissue formation in the regenerated pulp tissue.

Modulation of spreading, proliferation, and differentiation of human mesenchymal stem cells on gelatin-immobilized poly(L-lactide-co--caprolactone) substrates

Controlled adhesion and continuous growth of human mesenchymal stem cells (hMSCs) are essential for scaffold-based delivery of hMSCs in tissue engineering applications. The main goal of this study is to develop biofunctionalized synthetic substrates to actively control adhesion, spreading, and proliferation of hMSCs. gamma-Ray irradiation was employed to graft acrylic acid (AAc) to biodegeradable poly(L-lactide-co--caprolactone) (PLCL) films. Gelatin, a natural polymer, was then immobilized on the AAc grafted PLCL film (AAc-PLCL) to induce biomimetic interactions with the cells. The graft yield of AAc increased as the irradiation dose and AAc concentration increased, and the presence of gelatin (gelatin-AAc-PLCL) following immobilization was confirmed using ESCA. To investigate cell responses, hMSCs isolated from a human mandible were cultured on the various substrates and their adhesion, spreading, and proliferation were examined. After three days of culture, the DNA concentration from the cells cultured on gelatin-AAc-PLCL film was 2.9-fold greater than that on the PLCL film. Immunofluorescent staining of hMSCs cultured on the gelatin-AAc-PLCL films demonstrated homogeneous localization of F-Actin and vinculin in their cytoplasm, while mature adhesive structure was not observed from the cells cultured on other substrates. Furthermore, the ratio of projected area of adherent single cells on gelatin-AAc-PLCL films was significantly larger (116.80 +/- 12.78%) than that on the PLCL films (30.11 +/- 5.07%). Our results suggest that gelatin-immobilized PLCL substrates may be potentially used in tissue engineering, particularly as a stem cell delivery carrier for the regeneration of target tissue.