Oxidized alginate hydrogels for bone morphogenetic protein-2 delivery in long bone defects

Application of alginate microbeads as a carrier of bone morphogenetic protein-2 for bone regeneration

Bone morphogenetic protein-2 (BMP-2) is commonly used to enhance bone regeneration. The potential of BMP-2 for bone regeneration varies according to the concentration and release kinetics on the implanted site. Therefore, it is important to determine appropriate carriers of BMP-2. However, no optimal delivery vehicles have been identified. In the present study, we used alginate microbeads as a delivery vehicle for BMP-2. Alginate microbeads can be implanted onto the disease site through surgery or injection. The objective of this study was to evaluate that the osteoinductive properties of BMP-2 are effective in alginate microbeads as a carrier. In this study, the release kinetics of BMP-2 in alginate microbeads was evaluated using an enzyme-linked immunosorbent assay. BMP-2 released from alginate microbeads induced high alkaline phosphatase activity in canine adipose tissue-derived mesenchymal stem cells. Injection of alginate microbeads with BMP-2 into mouse subcutaneous tissue, as well as surgical implantation into the 5-mm circular calvarial defects in rats, was conducted and the results showed extensive new bone formation. In conclusion, alginate microbeads can be utilized as an effective BMP-2 delivery vehicle for use in orthopedic surgery and as an injectable vehicle for a minimally invasive therapy. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 107B: 286-294, 2019.

3D printed microchannel networks to direct vascularisation during endochondral bone repair

Bone tissue engineering strategies that recapitulate the developmental process of endochondral ossification offer a promising route to bone repair. Clinical translation of such endochondral tissue engineering strategies will require overcoming a number of challenges, including the engineering of large and often anatomically complex cartilage grafts, as well as the persistence of core regions of avascular cartilage following their implantation into large bone defects. Here 3D printing technology is utilized to develop a versatile and scalable approach to guide vascularisation during endochondral bone repair. First, a sacrificial pluronic ink was used to 3D print interconnected microchannel networks in a mesenchymal stem cell (MSC) laden gelatin-methacryloyl (GelMA) hydrogel. These constructs (with and without microchannels) were next chondrogenically primed in vitro and then implanted into critically sized femoral bone defects in rats. The solid and microchanneled cartilage templates enhanced bone repair compared to untreated controls, with the solid cartilage templates (without microchannels) supporting the highest levels of total bone formation. However, the inclusion of 3D printed microchannels was found to promote osteoclast/immune cell invasion, hydrogel degradation, and vascularisation following implantation. In addition, the endochondral bone tissue engineering strategy was found to support comparable levels of bone healing to BMP-2 delivery, whilst promoting lower levels of heterotopic bone formation, with the microchanneled templates supporting the lowest levels of heterotopic bone formation. Taken together, these results demonstrate that 3D printed hypertrophic cartilage grafts represent a promising approach for the repair of complex bone fractures, particularly for larger defects where vascularisation will be a key challenge.

Porous titanium scaffolds with self-assembled micro/nano-hierarchical structure for dual functions of bone regeneration and anti-infection

Porous titanium (Ti) scaffolds are widely used for bone repair because of their good biocompatibility, mechanical properties, and corrosion resistance. However, pristine Ti scaffolds are bioinert and unable to induce bone regeneration. In this study, chitosan coated bovine serum albumin nanoparticles (CBSA NPs) and oxidized alginate (OSA) were in a layer-by-layer (LbL) manner on Ti scaffolds. The LbL film possessed micro/nano-hierarchical architectures, has the features of nanostructures, and possesses abundant functional groups from CBSA NPs and OSA to improve the surface biocompatibility and biofunctionality of Ti scaffolds. These groups provide active sites for stable and efficient immobilization of bone morphogenic protein-2 (BMP2) through chemical and physical interactions without compromising its bioactivity. The synergistic effect of the hierarchical structure of assembled films and immobilized BMP2 on the scaffold improves cell adhesion, proliferation, and induces osteogenic differentiation of bone marrow stromal cells in vitro. Moreover, this modification also enhances ectopic bone formation bone. Furthermore, grafting of vancomycin on OSA resulted in good antibacterial activity of Ti scaffolds for prevention of infection during the bone healing process. In summary, this NPs-assembling method is convenient and effective to produce nanostructures and to load growth factors and antibacterial agents into Ti scaffolds for bone tissue engineering. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 3482-3492, 2017.

Enhanced in vivo retention of low dose BMP-2 via heparin microparticle delivery does not accelerate bone healing in a critically sized femoral defect

Bone morphogenetic protein-2 (BMP-2) is an osteoinductive growth factor used clinically to induce bone regeneration and fusion. Some complications associated with BMP-2 treatment have been attributed to rapid release of BMP-2 from conventional collagen scaffolds, motivating the development of tunable sustained-release strategies. We incorporated BMP-2-binding heparin microparticles (HMPs) into a hydrogel scaffold to improve spatiotemporal control of BMP-2 delivery to large bone defects. HMPs pre-loaded with BMP-2 were mixed into alginate hydrogels and compared to hydrogels containing BMP-2 alone. BMP-2 release from scaffolds in vitro, BMP-2 retention within injury sites in vivo, and bone regeneration in a critically sized femoral defect were evaluated. Compared to hydrogel delivery alone, BMP-2-loaded HMPs reduced BMP-2 release in vitro and increased early BMP-2 retention in the bone defect. BMP-2-loaded HMPs induced bone formation at both ectopic and orthotopic sites; however, the volume of induced bone was lower for defects treated with BMP-2-loaded HMPs compared to hydrogel delivery. To better understand the effect of HMPs on BMP-2 release kinetics, a computational model was developed to predict BMP-2 release from constructs in vivo. The model suggested that HMPs limited BMP-2 release into surrounding tissues, and that changing the HMP density could modulate BMP-2 release. Taken together, these experimental and computational results suggest the importance of achieving a balance of BMP-2 retention within the bone defect and BMP-2 release into surrounding soft tissues. HMP delivery of BMP-2 may provide a method of tuning BMP-2 release in vivo that can be further investigated to improve current methods of bone regeneration.

STATEMENT OF SIGNIFICANCE

The development of effective biomaterials for sustained protein delivery is a crucial component of tissue engineering strategies. However, in most applications, including bone repair, the optimal balance between protein presentation in the injury site and protein release into the surrounding tissues is unknown. Herein, we introduced heparin microparticles (HMPs) into a tissue engineered construct to increase in vivo retention of bone morphogenetic protein-2 (BMP-2) and enhance healing in femoral defects. Although HMPs induced bone regeneration, no increase in bone volume was observed, leading to further experimental and computational analysis of the effect of HMP-BMP-2 interactions on protein retention and release. Ultimately, this work provides insight into designing tunable protein-material interactions and their implications for controlling BMP-2 delivery.

Synthesis of cell composite alginate microfibers by microfluidics with the application potential of small diameter vascular grafts

Fabrication of small diameter vascular grafts (SDVGs) with appropriate responses for clinical application is still challenging. In the present work, the production and characterization of solid alginate based microfibers as potential SDVG candidates through the method of microfluidics were considered original. A simple glass microfluidic device with a 'L-shape' cylindrical-flow channel in the microfluidic platform was developed. The gelation of microfibers occurred when the alginate solution and a CaCl2 solution were introduced as a core flow and as a sheath flow, respectively. The diameters of the microfibers could be controlled by varying the flow rates and the glass capillary tubes diameters at their tips. The generated microfibers had somewhat rough and porous surfaces, their suture retention strengths were comparable to the strength of other tissue engineered grafts. The encapsulated mesenchymal stem cells proliferated well in the microfibers, and showed a stable endothelialization under the angiogenesis effects of vascular endothelial growth factor and fibroblastic growth factor. The in vivo implant into the mice abdomens indicated that cell composite microfibers caused a mild host reaction. These encouraging results suggest great promise of the application of microfluidics as a future alternative in SDVGs engineering.

The use of bioactive peptides to modify materials for bone tissue repair

It has been well recognized that the modification of biomaterials with appropriate bioactive peptides could further enhance their functions. Especially, it has been shown that peptide-modified bone repair materials could promote new bone formation more efficiently compared with conventional ones. The purpose of this article is to give a general review of recent studies on bioactive peptide-modified materials for bone tissue repair. Firstly, the main peptides for inducing bone regeneration and commonly used methods to prepare peptide-modified bone repair materials are introduced. Then, current in vitro and in vivo research progress of peptide-modified composites used as potential bone repair materials are reviewed and discussed. Generally speaking, the recent related studies have fully suggested that the modification of bone repair materials with osteogenic-related peptides provide promising strategies for the development of bioactive materials and substrates for enhanced bone regeneration and the therapy of bone tissue diseases. Furthermore, we have proposed some research trends in the conclusion and perspectives part.

RALA complexed α-TCP nanoparticle delivery to mesenchymal stem cells induces bone formation in tissue engineered constructs in vitro and in vivo

A range of bone regeneration strategies, from growth factor delivery and/or mesenchymal stem cell (MSC) transplantation to endochondral tissue engineering, have been developed in recent years. Despite their tremendous promise, the clinical translation and future use of many of these strategies is being hampered by concerns such as off target effects associated with growth factor delivery. Therefore the overall objective of this study was to investigate the influence of alpha-tricalcium phosphate (α-TCP) nanoparticle delivery into MSCs using an amphipathic cell penetrating peptide RALA, on osteogenesis in vitro and both intramembranous and endochondral bone formation in vivo. RALA complexed α-TCP nanoparticle delivery to MSCs resulted in an increased expression of bone morphogenetic protein-2 (BMP-2) and an upregulation in a number of key osteogenic genes. When α-TCP stimulated MSCs were encapsulated into alginate hydrogels, enhanced mineralization of the engineered construct was observed over a 28 day culture period. Furthermore, the in vivo bone forming potential of RALA complexed α-TCP nanoparticle delivery to MSCs was found to be comparable to growth factor delivery. Recognizing the potential and limitations associated with endochondral bone tissue engineering strategies, we then sought to explore how α-TCP nanoparticle delivery to MSCs influences early mineralization of engineered cartilage templates in vitro and their subsequent ossification in vivo. Despite accelerating mineralization of engineered cartilage templates in vitro, RALA complexed α-TCP nanoparticle delivery did not enhance endochondral bone formation in vivo. Therefore the potential of RALA complexed α-TCP nanoparticle delivery appears to be as an alternative to growth factor delivery as a single stage strategy for promoting bone generation.

Delivery vehicle effects on bone regeneration and heterotopic ossification induced by high dose BMP-2

Bone morphogenetic protein-2 (BMP-2), delivered on absorbable collagen sponge, is frequently used to treat bone defects. However, supraphysiological BMP-2 doses are common and often associated with complications such as heterotopic ossification and inflammation, causing pain and impaired mobility. This has prompted investigations into strategies to spatially control bone regeneration, for example growth factor delivery in appropriate scaffolds. Our objective was to investigate the spatiotemporal effects of high dose BMP-2 on bone regeneration as a function of the delivery vehicle. We hypothesized that an alginate delivery system would spatially restrict bone formation compared to a collagen sponge delivery system. In vitro, BMP-2 release was accelerated from collagen sponge compared to alginate constructs. In vivo, bone regeneration was evaluated over 12weeks in critically sized rat femoral segmental defects treated with 30μg rhBMP-2 in alginate hydrogel or collagen sponge, surrounded by perforated nanofiber meshes. Total bone volume, calculated from micro-CT reconstructions, was higher in the alginate group at 12weeks. Though bone volume within the central defect region was greater in the alginate group at 8 and 12weeks, heterotopic bone volume was similar between groups. Likewise, mechanical properties from ex vivo torsional testing were comparable between groups. Histology corroborated these findings and revealed heterotopic mineralization at 2weeks post-surgery in both groups. Overall, this study recapitulated the heterotopic ossification associated with high dose BMP-2 delivery, and demonstrated that the amount and spatial pattern of bone formation was dependent on the delivery matrix.

STATEMENT OF SIGNIFICANCE

Alginate hydrogel-based BMP-2 delivery has induced better spatiotemporal bone regeneration in animals, compared to clinically used collagen sponge, at lower BMP-2 doses. Lack of clear dose-response relationships for BMP-2 vis-à-vis bone regeneration has contributed to the use of higher doses clinically. We investigated the potential of the alginate system, with comparatively favorable BMP-2 release-kinetics, to reduce heterotopic ossification and promote bone regeneration, when used with a high BMP-2 dose. While defect mineralization improved with alginate hydrogel, the initial high-release phase and likely early tissue exposure to BMP-2 appeared sufficient to induce heterotopic ossification. The characterization presented here should provide the framework for future evaluations of strategies to optimize bone formation and minimize adverse effects of high dose BMP-2 therapy.

Silk-Hydroxyapatite Nanoscale Scaffolds with Programmable Growth Factor Delivery for Bone Repair

Osteoinductive biomaterials are attractive for repairing a variety of bone defects, and biomimetic strategies are useful toward developing bone scaffolds with such capacity. Here, a multiple biomimetic design was developed to improve the osteogenesis capacity of composite scaffolds consisting of hydroxyapatite nanoparticles (HA) and silk fibroin (SF). SF nanofibers and water-dispersible HA nanoparticles were blended to prepare the nanoscaled composite scaffolds with a uniform distribution of HA with a high HA content (40%), imitating the extracellular matrix (ECM) of bone. Bone morphogenetic protein-2 (BMP-2) was loaded in the SF scaffolds and HA to tune BMP-2 release. In vitro studies showed the preservation of BMP-2 bioactivity in the composite scaffolds, and programmable sustained release was achieved through adjusting the ratio of BMP-2 loaded on SF and HA. In vitro and in vivo osteogenesis studies demonstrated that the composite scaffolds showed improved osteogenesis capacity under suitable BMP-2 release conditions, significantly better than that of BMP-2 loaded SF-HA composite scaffolds reported previously. Therefore, these biomimetic SF-HA nanoscaled scaffolds with tunable BMP-2 delivery provide preferable microenvironments for bone regeneration.

3D Bioprinting of Developmentally Inspired Templates for Whole Bone Organ Engineering

The ability to print defined patterns of cells and extracellular-matrix components in three dimensions has enabled the engineering of simple biological tissues; however, bioprinting functional solid organs is beyond the capabilities of current biofabrication technologies. An alternative approach would be to bioprint the developmental precursor to an adult organ, using this engineered rudiment as a template for subsequent organogenesis in vivo. This study demonstrates that developmentally inspired hypertrophic cartilage templates can be engineered in vitro using stem cells within a supporting gamma-irradiated alginate bioink incorporating Arg-Gly-Asp adhesion peptides. Furthermore, these soft tissue templates can be reinforced with a network of printed polycaprolactone fibers, resulting in a ≈350 fold increase in construct compressive modulus providing the necessary stiffness to implant such immature cartilaginous rudiments into load bearing locations. As a proof-of-principal, multiple-tool biofabrication is used to engineer a mechanically reinforced cartilaginous template mimicking the geometry of a vertebral body, which in vivo supported the development of a vascularized bone organ containing trabecular-like endochondral bone with a supporting marrow structure. Such developmental engineering approaches could be applied to the biofabrication of other solid organs by bioprinting precursors that have the capacity to mature into their adult counterparts over time in vivo.

The role of peptides in bone healing and regeneration: a systematic review

BACKGROUND

Bone tissue engineering and the research surrounding peptides has expanded significantly over the last few decades. Several peptides have been shown to support and stimulate the bone healing response and have been proposed as therapeutic vehicles for clinical use. The aim of this comprehensive review is to present the clinical and experimental studies analysing the potential role of peptides for bone healing and bone regeneration.

METHODS

A systematic review according to PRISMA guidelines was conducted. Articles presenting peptides capable of exerting an upregulatory effect on osteoprogenitor cells and bone healing were included in the study.

RESULTS

Based on the available literature, a significant amount of experimental in vitro and in vivo evidence exists. Several peptides were found to upregulate the bone healing response in experimental models and could act as potential candidates for future clinical applications. However, from the available peptides that reached the level of clinical trials, the presented results are limited.

CONCLUSION

Further research is desirable to shed more light into the processes governing the osteoprogenitor cellular responses. With further advances in the field of biomimetic materials and scaffolds, new treatment modalities for bone repair will emerge.

An alginate-based platform for cancer stem cell research

As the primary determinants of the clinical behaviors of human cancers, the discovery of cancer stem cells (CSCs) represents an ideal target for novel anti-cancer therapies (Kievit et al., 2014). Notably, CSCs are difficult to propagate in vitro, which severely restricts the study of CSC biology and the development of therapeutic agents. Emerging evidence indicates that CSCs rely on a niche that controls their differentiation and proliferation, as is the case with normal stem cells (NSCs). Replicating the in vivo CSC microenvironment in vitro using three-dimensional (3D) porous scaffolds can provide means to effectively generate CSCs, thus enabling the discovery of CSC biology. This paper presents our study on a novel alginate-based platform for mimicking the CSC niche to promote CSC proliferation and enrichment. In this study, we used a versatile mouse 4T1 breast cancer model to independently evaluate the matrix parameters of a CSC niche - including the material's mechanical properties, cytokine immobilization, and the composition of the extracellular matrix's (ECM's) molecular impact - on CSC proliferation and enrichment. On this basis, the optimal stiffness and concentration of hyaluronic acid (HA), as well as epidermal growth factor and basic fibroblast growth factor immobilization, were identified to establish the platform for mimicking the 4T1 breast CSCs (4T1 CSCs) niche. The 4T1 CSCs obtained from the platform show increased expression of the genes involved in breast CSC and NSC, as compared to general 2D or 3D culture, and 4T1 CSCs were also demonstrated to have the ability to quickly form a subcutaneous tumor in homologous Balb/c mice in vivo. In addition, the platform can be adjusted according to different parameters for CSC screening. Our results indicate that our platform offers a simple and efficient means to isolate and enrich CSCs in vitro, which can help researchers better understand CSC biology and thus develop more effective therapeutic agents to treat cancer.

STATEMENT OF SIGNIFICANCE

As the primary determinants of the clinical behaviors of human cancers, the discovery of cancer stem cells (CSCs) represents an ideal target for novel anti-cancer therapies. However, CSCs are difficult to propagate in vitro, which severely restricts the study of CSC biology and the development of therapeutic agents. Emerging evidence indicates that CSCs rely on a niche that controls their differentiation and proliferation, as is the case with normal stem cells (NSCs). Replicating the in vivo CSC microenvironment in vitro using three-dimensional (3D) porous scaffolds can provide means to effectively generate CSCs, thus enabling the discovery of CSC biology. In our study, a novel alginate-based platform were developed for mimicking the CSC niche to promote CSC proliferation and enrichment.

Electrical impedance spectroscopy - a potential method for the study and monitoring of a bone critical-size defect healing process treated with bone tissue engineering and regenerative medicine approaches

The development of strategies of bone tissue engineering and regenerative medicine has been drawing considerable attention to treat bone critical-size defects (CSDs). Notably, new strategies and/or treatment approaches always require appropriate tools to track the healing process so as to evaluate their success. In this paper, we present the development of a novel approach for the non-invasive, yet real-time, monitoring and assessment of bone CSDs treated with biomaterials and biomedical approaches. For this, we employed the technique of electrical impedance spectroscopy (EIS) to quantitatively monitor and assess the changes in electrical impedance, and thus the regeneration process. In our in vitro tests, we examined the biochemical changes of the fracture area and investigated the influence of collagen and hydroxyapatite on the changes in electrical impedance by EIS, thus inferring the changes in bone regeneration and structure. Based on this success, we further demonstrated, in real time, the process of regeneration of the traumatic area in an in vivo rabbit model. Our electrical-impedance data of the experiment groups, i.e., the ones treated with natural coral and bone morphogenetic protein-2 (BMP-2), revealed that each group has its unique impedance graph characteristics, which are directly associated with the degree of regeneration. For comparison, we also employed radiography, gross anatomy, and histological analyses in examination. Our results illustrate that EIS holds considerable potential as a non-invasive tool for monitoring, in real time, the healing of bone CSDs by allowing for quantitatively characterizing the changes of both hydroxyapatite and collagen.

Environmental manipulation to promote stem cell survival in vivo: use of aggregation, oxygen carrier, and BMP-2 co-delivery strategies

While mesenchymal stem cell (MSC)-based strategies for critically-sized bone defect repair hold promise, poor cell survival in vivo remains a significant barrier to the translation of these therapeutics.

Influence of scaffold properties on the inter-relationship between human bone marrow derived stromal cells and endothelial cells in pro-osteogenic conditions

One of the significant challenges in bone tissue engineering is the integration of biomaterials designed to facilitate and stimulate mineralization with a simultaneously rapid rate of angiogenesis and vascularization of the tissue construct, a challenge complicated by our lack of knowledge of the interactions among key cell types and scaffold properties. This study compared functional activity of human bone marrow-derived stromal cells (hMSC) seeded onto a porous salt-leached poly(D,L-lactic acid) (PDLLA) scaffolds, with and without the incorporation of silk fibroin fibers and then further investigated their co-culture with human umbilical vein endothelial cells (HUVECs). Cell viability, proliferation, and alkaline phosphatase activity were measured for a range of time points in culture, with osteogenic and angiogenic marker immunolocalization and gene expression at selected stages. Our findings suggest that, despite similar porosity and pore size distribution exhibited by the PDLLA and PDLLA plus silk fibroin scaffolds, there were marked differences in cell distribution and function. In the absence of fibers, a highly osteogenic response was observed in hMSCs in the scaffolds co-cultured with endothelial cells, greater than that observed with hMSCs alone or in either of the scaffolds with fibers added. However, fiber presence clearly better supported endothelial cell cultures, as determined by greater levels of endothelial marker expression at both the gene and protein level after 3 weeks of culture. The design of composite scaffolds integrating beneficial components of differing structures and materials to facilitate appropriate biological responses appears a promising yet challenging avenue of research.

STATEMENT OF SIGNIFICANCE

A significant challenge in bone tissue engineering is to promote a rapid vascularization of the tissue construct in parallel to the extracellular matrix mineralization. The design of composite scaffolds integrating beneficial components of differing structures and materials to facilitate appropriate biological responses appears a promising yet challenging avenue of research. Here we investigated cultures of hMSCs and HUVECs on a silk fibroin enhanced PDLLA scaffold, showing that the final output of this in vitro system is not the linear sum of the effects of the single variables. These results are of interest as they demonstrate how the addition of endothelial cells can affect hMSC phenotype and that the output can be further modulated by the introduction of silk fibroin fibers.

Hydrogel-based Delivery of rhBMP-2 Improves Healing of Large Bone Defects Compared With Autograft

BACKGROUND

Autologous bone grafting remains the gold standard in the treatment of large bone defects but is limited by tissue availability and donor site morbidity. Recombinant human bone morphogenetic protein-2 (rhBMP-2), delivered with a collagen sponge, is clinically used to treat large bone defects and complications such as delayed healing or nonunion. For the same dose of rhBMP-2, we have shown that a hybrid nanofiber mesh-alginate (NMA-rhBMP-2) delivery system provides longer-term release and increases functional bone regeneration in critically sized rat femoral bone defects compared with a collagen sponge. However, no comparisons of healing efficiencies have been made thus far between this hybrid delivery system and the gold standard of using autograft.

QUESTIONS/PURPOSES

We compared the efficacy of the NMA-rhBMP-2 hybrid delivery system to morselized autograft and hypothesized that the functional regeneration of large bone defects observed with sustained BMP delivery would be at least comparable to autograft treatment as measured by total bone volume and ex vivo mechanical properties.

METHODS

Bilateral critically sized femoral bone defects in rats were treated with either live autograft or with the NMA-rhBMP-2 hybrid delivery system such that each animal received one treatment per leg. Healing was monitored by radiography and histology at 2, 4, 8, and 12 weeks. Defects were evaluated for bone formation by longitudinal micro-CT scans over 12 weeks (n = 14 per group). The bone volume, bone density, and the total new bone formed beyond 2 weeks within the defect were calculated from micro-CT reconstructions and values compared for the 2-, 4-, 8-, and 12-week scans within and across the two treatment groups. Two animals were used for bone labeling with subcutaneously injected dyes at 4, 8, and 12 weeks followed by histology at 12 weeks to identify incremental new bone formation. Functional recovery was measured by ex vivo biomechanical testing (n = 9 per group). Maximum torque and torsional stiffness calculated from torsion testing of the femurs at 12 weeks were compared between the two groups.

RESULTS

The NMA-rhBMP-2 hybrid delivery system resulted in greater bone formation and improved biomechanical properties compared with autograft at 12 weeks. Comparing new bone volume within each group, the NMA-rhBMP-2-treated group had higher volume (p < 0.001) at 12 weeks (72.59 ± 18.34 mm(3)) compared with 8 weeks (54.90 ± 16.14) and 4 weeks (14.22 ± 9.59). The new bone volume was also higher at 8 weeks compared with 4 weeks (p < 0.001). The autograft group showed higher (p <0.05) new bone volume at 8 weeks (11.19 ± 8.59 mm(3)) and 12 weeks (14.64 ± 10.36) compared with 4 weeks (5.15 ± 4.90). Between groups, the NMA-rhBMP-2-treated group had higher (p < 0.001) new bone volume than the autograft group at both 8 and 12 weeks. Local mineralized matrix density in the NMA-rhBMP-2-treated group was lower than that of the autograft group at all time points (p < 0.001). Presence of nuclei within the lacunae of the autograft and early appositional bone formation seen in representative histology sections suggested that the bone grafts remained viable and were functionally engrafted within the defect. The bone label distribution from representative sections also revealed more diffuse mineralization in the defect in the NMA-rhBMP-2-treated group, whereas more localized distribution of new mineral was seen at the edges of the graft pieces in the autograft group. The NMA-rhBMP-2-treated group also revealed higher torsional stiffness (0.042 ± 0.019 versus 0.020 ± 0.022 N-m/°; p = 0.037) and higher maximum torque (0.270 ± 0.108 versus 0.125 ± 0.137 N-m; p = 0.024) compared with autograft.

CONCLUSIONS

The NMA-rhBMP-2 hybrid delivery system improved bone formation and restoration of biomechanical function of rat segmental bone defects compared with autograft treatment.

CLINICAL RELEVANCE

Delivery systems that allow prolonged availability of BMP may provide an effective clinical alternative to autograft treatment for repair of segmental bone defects. Future studies in a large animal model comparing mixed cortical-trabecular autograft and the NMA-rhBMP-2 hybrid delivery system are the next step toward clinical translation of this approach.

Bone morphogenetic protein-7: Review of signalling and efficacy in fracture healing

Bone morphogenetic proteins (BMPs) are a group of signalling molecules that belong to the transforming growth factor-β superfamily of proteins. Initially identified for their ability to induce bone formation, recent advances in the understanding of cellular and molecular mechanisms regarding BMPs have led to the use of the growth factor to accelerate bone healing. Recent clinical trials have demonstrated that BMPs, BMP-7 in particular, may present an alternative line of treatment other than the gold standard, autogenous bone grafting, in the treatment of fracture nonunion. We performed a literature search in September 2014 of PubMed and Embase using search terms, including "bone morphogenetic proteins", "BMP-7", "non-union", "fracture healing" and "cost-effectiveness", reviewing the efficacy, safety, and cost of treatment of nonunions with BMP-7. The authors further canvassed the reference lists of selected articles and used online search tools, such as Google Scholar. BMP-7 uses both the canonical and noncanonical signalling pathways. The treatment of fracture nonunion with recombinant human BMP-7 (rhBMP-7) has a comparable efficacy with that of autogenous bone grafting with an average union rate of 87% compared with 93% for bone grafting. Furthermore, fewer complications have been described with the use of rhBMP-7 compared with traditional bone grafting. We describe the signalling pathways that BMP-7 uses to exert its effect on bone. In nonunions, rhBMP-7 has been shown to have a similar efficacy to bone grafting with fewer complications.

MiRNA inhibition in tissue engineering and regenerative medicine

MicroRNAs (miRNAs) are noncoding RNAs that provide an endogenous negative feedback mechanism for translation of messenger RNA (mRNA) into protein. Single miRNAs can regulate hundreds of mRNAs, enabling miRNAs to orchestrate robust biological responses by simultaneously impacting multiple gene networks. MiRNAs can act as master regulators of normal and pathological tissue development, homeostasis, and repair, which has motivated expanding efforts toward the development of technologies for therapeutically modulating miRNA activity for regenerative medicine and tissue engineering applications. This review highlights the tools currently available for miRNA inhibition and their recent therapeutic applications for improving tissue repair.

Functional augmentation of naturally-derived materials for tissue regeneration

Tissue engineering strategies have utilized a wide spectrum of synthetic and naturally-derived scaffold materials. Synthetic scaffolds are better defined and offer the ability to precisely and reproducibly control their properties, while naturally-derived scaffolds typically have inherent biological and structural properties that may facilitate tissue growth and remodeling. More recently, efforts to design optimized biomaterial scaffolds have blurred the line between these two approaches. Naturally-derived scaffolds can be engineered through the manipulation of intrinsic properties of the pre-existing backbone (e.g., structural properties), as well as the addition of controllable functional components (e.g., biological properties). Chemical and physical processing techniques used to modify structural properties of synthetic scaffolds have been tailored and applied to naturally-derived materials. Such strategies include manipulation of mechanical properties, degradation, and porosity. Furthermore, biofunctional augmentation of natural scaffolds via incorporation of exogenous cells, proteins, peptides, or genes has been shown to enhance functional regeneration over endogenous response to the material itself. Moving forward, the regenerative mode of action of naturally-derived materials requires additional investigation. Elucidating such mechanisms will allow for the determination of critical design parameters to further enhance efficacy and capitalize on the full potential of naturally-derived scaffolds.