Enzymatic determination of BPA by means of tyrosinase immobilized on different carbon carriers

Bisphenol A content in fish caught in two different sites of the Tyrrhenian Sea (Italy)

Bisphenol A (BPA) is an endocrine disruptor (ED) that is abundant in the environment because of its extensive use in human-manufactured products. In this study, the BPA concentration was measured in the muscle and liver of five edible fish, characterized by different habitat and habits, caught in two different sites of the Tyrrhenian Sea (Italy). Our results show that: (i) fish livers are about 2.5 times more polluted than muscle; (ii) fish caught in the Gulf of Naples are more polluted than those from the Latium coasts, ranging from 1.2-fold more for White Bream to 6.6-fold for Grey Mullet; and (iii) the percentages of fish found to be BPA-polluted in the Gulf of Naples ranged from 73% (for Bass) to 90% (for Mullet), while the Latium fish range from 60% (for Bass) to 90% (for Mullet). These data indicate that consumers of fish caught in the Gulf of Naples are at a greater risk for BPA-induced endocrine pathologies compared to those who consume fish caught along the Latium coasts.

Pre-natal exposure of mice to bisphenol A elicits an endometriosis-like phenotype in female offspring

Endometriosis is a chronic gynecological disease characterized by the growth of endometrial tissue outside the uterine cavity. Exposure to endocrine disruptors during critical period of development causes long-lasting effects, being the genital system one of the targets. This study describes the effects on female genital system caused by developmental exposure to the endocrine-disrupting chemical bisphenol A (BPA) during pre- and peri-natal development in mice. To this end, timed pregnant Balb-C mice were treated from day 1 of gestation to 7 days after delivery with BPA (100, or 1000 microg/kg/day). After delivery, pups were held for 3 months; then, pelvic organs were analyzed in their entirety and livers of both pups and moms were studied for the presence of BPA. We found in the adipose tissue surrounding the genital tracts of a consistent number of treated animals, endometriosis-like structure with the presence of both glands and stroma and expressing both estrogen receptor and HOXA-10. Moreover, cystic ovaries, adenomatous hyperplasia with cystic endometrial hyperplasia and atypical hyperplasia were significantly more frequent in treated animals respect to the controls. Finally, BPA was found in the livers of exposed moms and female offspring. In conclusion, we describe for the first time an endometriosis-like phenotype in mice, elicited by pre-natal exposition to BPA. This observation may induce to thoroughly reconsider the pathogenesis and treatment of endometriosis, considering the high incidence of endometriosis and the problems caused by associated infertility.

Stable and sensitive flow-through monitoring of phenol using a carbon nanotube based screen printed biosensor

A stable and sensitive biosensor for phenol detection based on a screen printed electrode modified with tyrosinase, multiwall carbon nanotubes and glutaraldehyde is designed and applied in a flow injection analytical system. The proposed carbon nanotube matrix is easy to prepare and ensures a very good entrapment environment for the enzyme, being simpler and cheaper than other reported strategies. In addition, the proposed matrix allows for a very fast operation of the enzyme, that leads to a response time of 15 s. Several parameters such as the working potential, pH of the measuring solution, biosensor response time, detection limit, linear range of response and sensitivity are studied. The obtained detection limit for phenol was 0.14 x 10(-6) M. The biosensor keeps its activity during continuous FIA measurements at room temperature, showing a stable response (RSD 5%) within a two week working period at room temperature. The developed biosensor is being applied for phenol detection in seawater samples and seems to be a promising alternative for automatic control of seawater contamination. The developed detection system can be extended to other enzyme biosensors with interest for several other applications.

Sensitivity and selectivity determination of BPA in real water samples using PAMAM dendrimer and CoTe quantum dots modified glassy carbon electrode

Bisphenol A (BPA) is an environmental pollutant to disrupt endocrine system or cause cancer, thus the detection of BPA is very important. Herein, an amperometric sensor was fabricated based on immobilized CoTe quantum dots (CoTe QDs) and PAMAM dendrimer (PAMAM) onto glassy carbon electrode (GCE) surface. The cyclic voltammogram of BPA on the sensor exhibited a well-defined anodic peak at 0.490V in 0.1M pH 8.0 PBS. The determination conditions were optimized and the kinetic parameters were calculated. The linear range was 1.3 x 10(-8) to 9.89 x 10(-6)M with the correlation coefficient of 0.9999. The limit of detection was estimated to be 1 x 10(-9)M. The current reached the steady-state current within about 5s. Furthermore, the fabricated sensor was successfully applied to determine BPA in real water samples.

Amperometric biosensor based on tyrosinase immobilized onto multiwalled carbon nanotubes-cobalt phthalocyanine-silk fibroin film and its application to determine bisphenol A

An amperometric bisphenol A (BPA) biosensor was fabricated by immobilizing tyrosinase on multiwalled carbon nanotubes (MWNTs)-cobalt phthalocyanine (CoPc)-silk fibroin (SF) composite modified glassy carbon electrode (GCE). In MWNTs-CoPc-SF composite film, SF provided a biocompatible microenvironment for the tyrosinase to retain its bioactivity, MWNTs possessed excellent inherent conductivity to enhance the electron transfer rate and CoPc showed good electrocatalytic activity to electrooxidation of BPA. The cyclic voltammogram of BPA at this biosensor exhibited a well defined anodic peak at 0.625 V. Compared with bare GCE, the oxidation signal of BPA significantly increased; therefore, this oxidation signal was used to determine BPA. The effect factors were optimized and the electrochemical parameters were calculated. The possible oxidation mechanism was also discussed. Under optimum conditions, the oxidation current was proportional to BPA concentration in the range from 5.0 x 10(-8) to 3.0 x 10(-6) M with correlation coefficient of 0.9979 and detection limit of 3.0 x 10(-8) M (S/N=3). The proposed method was successfully applied to determine BPA in plastic products and the recovery was in the range from 95.36% to 104.39%.

Electrochemical sensors based on carbon nanotubes

This review focuses on recent contributions in the development of the electrochemical sensors based on carbon nanotubes (CNTs). CNTs have unique mechanical and electronic properties, combined with chemical stability, and behave electrically as a metal or semiconductor, depending on their structure. For sensing applications, CNTs have many advantages such as small size with larger surface area, excellent electron transfer promoting ability when used as electrodes modifier in electrochemical reactions, and easy protein immobilization with retention of its activity for potential biosensors. CNTs play an important role in the performance of electrochemical biosensors, immunosensors, and DNA biosensors. Various methods have been developed for the design of sensors using CNTs in recent years. Herein we summarize the applications of CNTs in the construction of electrochemical sensors and biosensors along with other nanomaterials and conducting polymers.

Phenolics: occurrence and immunochemical detection in environment and food

Phenolic compounds may be of natural or anthropogenic origin and be present in the environment as well as in food. They comprise a large and diverse group of compounds that may be either beneficial or harmful for consumers. In this review first a non-exhausting overview of interesting phenolics is given, in particular with regards to their presence in environment and food. For some of these compounds, beneficial, toxicological and/or optionally endocrine disrupting activities will be presented. Further, immunochemical detection and/or isolation methods developed will be discussed, including advantages and disadvantages thereof in comparison with conventional analytical methods such as HPLC, GC, MS. A short overview of new sensor-like methods will also be included for present and future application.

Mixed ceria-based metal oxides biosensor for operation in oxygen restrictive environments

The unique catalytic, electrochemical, and oxygen storage properties of ceria and mixed ceria/titania hybrid composites were used to fabricate a new type of electrochemical enzyme biosensor. These materials provided increased analytical performance and possibilities for operation in oxygen-free conditions of an oxidase enzyme biosensor using tyrosinase as a model example. The investigation of the enzymatic reaction in the presence and absence of oxygen was first carried out using cyclic voltammetry. The results were used to identify the role of each metal oxide in the immobilization matrix and fabricate a simple amperometric tyrosinase biosensor for the detection of phenol and dopamine. The biosensor was optimized and characterized with respect to response time, detection limit, linear concentration range, sensitivity, and kinetic parameters. The detection limit for phenol was in the nanomolar range, with a detection limit of 9.0 x 10(-9) M and a sensitivity of 86 mA M(-1) in the presence of oxygen and of 5.6 x 10(-9) M and a sensitivity of 65 mA M(-1) in the absence of oxygen. The optimized biosensor also showed selective determination of the neurotransmitter dopamine with a detection limit of 3.4 x 10(-8) M and a sensitivity of 14.9 mA M(-1) in the presence of oxygen and of 4.2 x 10(-8) M and 14.8 mA M(-1) in the absence of oxygen. This strategy shows promise for increasing the sensitivity of oxidase enzyme sensors and provides opportunities for operation in oxygen limited conditions. It can also be extended for the development of other enzyme biosensors.