Magnetic poly(β-cyclodextrin-ionic liquid) nanocomposites for micro-solid phase extraction of selected polycyclic aromatic hydrocarbons in rice samples prior to GC-FID analysis

Magnetic C60 nanospheres based solid-phase extraction coupled with isotope dilution gas chromatography-mass spectrometry method for the determination of sixteen polycyclic aromatic hydrocarbons in Chinese herbal medicines

C₆₀-based magnetic nanospheres were synthesized by coating Fe₃O₄ nanospheres with silica, then modifying with 3-aminopropyltriethoxysilane as a linker and a C₆₀ fullerene stationary phase. The morphologies, magnetic properties, infrared absorption and carbon content of magnetic nanospheres were studied by TEM, VSM, FTIR and carbon and sulfur analyzer. The magnetic nanospheres were employed for the magnetic solid-phase extraction (MSPE) of 16 polycyclic aromatic hydrocarbons (PAHs) in nine Chinese herbal medicines. The analyses were conducted by isotope dilution gas chromatography-mass spectrometry. The main parameters influencing the extraction, including extraction solvent, adsorbent amount, and extraction time were optimized. Method validation showed that the limit of detection (LOD) was 0.02-0.11 µg/kg, and the limit of quantification (LOQ) was 0.07-0.36 µg/kg. The spiked recoveries rates for 16 PAHs in white peony root were 84.7-107.2%. The relative standard deviation (RSD) was 1.7-8.4%. The established method was further used for the determination 16 PAHs in nine Chinese herbal medicines. Total content of 16 PAHs varied from 73.6 µg/kg (fructus lycii) to 2172.6 µg/kg (astragalus root). The results indicate that the pollution of PAHs in Chinese herbal medicines is serious. The established method can effective detect PAHs contamination in Chinese herbal medicines.

Polycyclic aromatic hydrocarbons in edible oils and fatty foods: Occurrence, formation, analysis, change and control

Numerous studies have demonstrated that dozens of polycyclic aromatic hydrocarbons (PAHs) are mutagenic, genotoxic and strongly carcinogenic. PAHs are found to be widely present in foods contaminated through multiple paths. Due to their lipophilic nature, these compounds easily accumulate in edible oils and fatty foods where they can range from no detection to over 2000μg/kg. Compared to precursor PAHs, researchers have seldom studied the presence of PAH derivatives, especially in food matrices. This chapter includes the physical and chemical characteristics of PAHs and their types, occurrence, sample pretreatment and instrumental determination methods, and their formation, change and control in edible oils and fatty foods. The occurrence and formation of PAH derivatives in foods are much less investigated compared to those of their precursor PAHs. Although the removal of matrix effects and accuracy remain difficult for current rapid determination methods, a prospective research direction of PAH analysis for large-scale screening is in demand. To date, physical absorption, chemical oxidation and biodegradation have been widely used in PAH removal techniques. Specific types of bacteria, fungi, and algae have also been used to degrade PAHs into harmless compounds. However, most of them can only degrade a range of LPAHs, such as naphthalene, anthracene and phenanthrene. Their ability to degrade HPAHs requires further study. Moreover, it is still a great challenge to maintain food nutrition and flavor during the PAH removal process using these methods.

Critical review of micro-extraction techniques used in the determination of polycyclic aromatic hydrocarbons in biological, environmental and food samples

Polycyclic Aromatic Hydrocarbons (PAHs) are ubiquitous environmental contaminants and their accurate determination is very important to human health and environment safety. In this review, sorptive-based micro-extraction techniques [such as Solid-Phase Micro-extraction (SPME), Stir Bar Sorptive Extraction (SBSE), Micro-extraction in Packed Sorbent (MEPS)] and solvent-based micro-extraction [Membrane-Mediated Liquid-Phase Micro-extraction (MM-LPME), Dispersive Liquid-Liquid Micro-extraction (DLLME), and Single Drop Micro-extraction (SDME)] developed for quantification of PAHs in environmental, biological and food samples are reviewed. Moreover, recent micro-extraction techniques that have been coupled with other sample extraction strategies are also briefly discussed. The main objectives of these micro-extraction techniques are to perform extraction, pre-concentration and clean up together as one step, and the reduction of the analysis time, cost and solvent following the green chemistry guidelines.

The classification and application of cyclodextrin polymers: a review

After introducing the concept of cyclodextrin polymers, their classification and applications have been summarized.

Cyclodextrin-based sorbents for solid phase extraction

Cyclodestrins (CDs) are cyclic oligosaccharides well-known for their ability to form host-guest inclusion complexes with properly sized compounds. They have been used for decades as chiral selectors as well as drug delivery systems within the frameworks of separation science and pharmaceutical science. More recently, their use has been extended to the field of extractive science under the stimulus of additional advantageous characteristics, such as low-price, negligible environmental impact, non-toxicity, as arising from the fact that natural CDs are starch degradation products. To abate their solubility in water and generate novel sorbents for solid phase extraction, the following approaches have been employed: (i) immobilization onto inert materials (silica, attapulgite, etc.); (ii) immobilization onto nanomaterials (magnetic nanoparticles, titanium oxide, carbon nanotubes, graphene oxide, etc.); (iii) polymerisation with specific cross-linkers to form the so-called CD-based nanosponges. Particularly promising are these last ones for their selectivity, mesoporous structure, insolubility in aqueous media and good dispersibility. This review offers a concise overview on the state of art and future prospects of CDs in this important sector of the analytical chemistry, offering a critical perspective of the most significant applications.

Porous ionic liquid polymer: A reusable adsorbent with broad operating pH range for speciation of nitrate and nitrite

Ionic liquids (ILs) are a class of fluids with unique physicochemical properties employing polymeric substances emerging new materials. Solidification of ILs into porous materials generates porous ionic liquid polymers that combine the unique characteristics of ILs with common porous materials and polymers. In this study, it's the first time the porous ionic liquid polymer was chosen as a sorbent for extraction and speciation of nitrite and nitrate. Porous IL was prepared through polymerization of 1-allyl-3-methylimidazolium bromide monomers in the presence of azobisisobutyronitrile (AIBN) and crosslinking of ethylene glycol dimethyl acrylate (EGDMA). Parameters affecting the adsorbent performance were optimized. Under the optimal conditions, correlation coefficient (R²) was 0.9996 and LOD was 0.1 µg L^-1. This method presented the linearity in the concentration range between 0.1-100 µg L^-1 and the relative standard deviation was 3.2%. Finally, the adsorption behavior of the obtained sorbent for nitrate and nitrite determination in various real samples was evaluated. The result indicates that the porous ionic liquid polymer showed high adsorption capacity (233 mg g^-1). The convenient preparation of the porous ionic liquid material, as well as high adsorption capacity for anionic pollutants predicted its broad application potential in anion removal materials.

Dispersive micro-solid phase extraction based on Fe3O4@SiO2@Ti-MOF as a magnetic nanocomposite sorbent for the trace analysis of caffeic acid in the medical extracts of plants and water samples prior to HPLC-UV analysis

In this work, Fe₃O₄@SiO₂@Ti-MOF-NCs, as an efficient sorbent, have been synthesized in a laboratory and utilized for extracting CA in the medical extracts of plants and water samples before their analysis by HPLC.