Comparison of citrus pectin and apple pectin in conjugation with soy protein isolate (SPI) under controlled dry-heating conditions

Food protein glycation: A review focusing on stability and in vitro digestive characteristics of oil/water emulsions

Recently, increasing studies have shown that the functional properties of proteins, including emulsifying properties, antioxidant properties, solubility, and thermal stability, can be improved through glycation reaction under controlled reaction conditions. The use of glycated proteins to stabilize hydrophobic active substances and to explore the gastrointestinal fate of the stabilized hydrophobic substances has also become the hot spot. Therefore, in this review, the effects of glycation on the structure and function of food proteins and the physical stability and oxidative stability of protein-stabilized oil/water emulsions were comprehensively summarized and discussed. Also, this review sheds lights on the in vitro digestion characteristics and edible safety of emulsion stabilized by glycated protein. It can further serve as a research basis for understanding the role of structural features in the emulsification and stabilization of glycated proteins, as well as their utilization as emulsifiers in the food industry.

Edible pullulan enhanced water-soluble keratin with improved sizing performance for sustainable textile industry

Feather keratin from waste feather has become an attractive target to replace petroleum-based Poly (vinyl alcohol) sizes due to its easy film-forming ability, excellent adhesive property, biodegradability and low cost. However, poor water-solubility and brittleness of pure keratin films have become the bottlenecks and restricted the application of keratin as sizing agents. Therefore, water-soluble keratin was extracted by the reduction-preservation method and enhanced by saccharides in aqueous system to obtain all-green keratin-based slurry. The results showed that the keratin-based slurry exhibited improved sizing performance in the order of sucrose ≤ glucose ≤ pullulan by the moderate Maillard reaction. Among them, the fabricated pullulan-keratin sizes films had 27.86 %, 2684.08 % and 2911.31 % increment in tensile strength, elongation and work of facture compared with pure keratin sizes films. Besides, the addition of pullulan and subsequently moderate Maillard reaction improved the thermo-tenacity of keratin-based sizes, which was expected to tackle with the brittleness of pure keratin size films. In addition, novel pullulan-keratin sizes had good sizing performance and high desizing efficiency to cotton, cotton/polyester and polyester yarns and fabrics. Successful utilization of pullulan-keratin sizes will bring opportunities for high value utilization of waste feather and promote the green and low-carbon development of textile industry.

Sustainable utilization of Citrus limetta peel for obtaining pectin and its application in cookies as a fat replacer

In this study, a five-factorial central composite design was employed to optimize pectin extraction from novel source, through ultrasound-assisted extraction. A 35.58% yield was obtained under optimized conditions of pH 1.0, solid (g): liquid (mL) ratio 1:24, amplitude 84.2 Hz, duty cycle 23 s/30 s, and time 30 min. The equivalent weight, methoxyl content, anhydrouronic acid content, degree of esterification, water-holding capacity, and oil-holding capacity of the extracted pectin were 796.40 ± 2.07, 8.29 ± 0.38%, 71.32 ± 0.54%, 64.66 ± 2.08%, 8.04 ± 0.10 g water/g pectin, and 2.24 ± 030 g oil/g pectin, respectively. The chemical profile of the extracted pectin was assessed with FTIR and NMR analyses. The extracted pectin was utilized as a butter substitute in cookies. Up to 30% butter in cookies could be replaced with the extracted pectin without altering the sensory and physicochemical properties. Overall, results of presented work suggest that using waste-derived pectin as a fat substitute in cookies offers a sustainable and health-promoting approach for converting waste into wealth.

Influence mechanism of polysaccharides induced Maillard reaction on plant proteins structure and functional properties: A review

Plant proteins have high nutritional value, a wide range of sources and low cost. However, it is easily affected by the environmental factors of processing and lead the problem of poor functionality. These problems of plant proteins can be improved by the polysaccharides induced Maillard reaction. The interaction between proteins and polysaccharides through Maillard reaction can change the structure of proteins as well as improve the functional properties and biological activity. The products of Maillard reaction, such as reductone intermediates, heterocyclic compounds and melanoidins have certain antioxidant, antibacterial and other biological activities. However, heterocyclic amines, acrylamide, and products generated in the advanced stage of the Maillard reaction also have a negative impact, which may increase cytotoxicity and be associated with chronic diseases. Therefore, it is necessary to effectively control the process of Maillard reaction. This review focuses on the modification of plant proteins by polysaccharide-induced Maillard reaction and the effects of Maillard reaction on protein structure, functional properties and biological activity. It also points out how to accurately reflect the changes of protein structure in Maillard reaction. In addition, it also points out the application ways of plant protein-polysaccharide complexes in the food industry, for example, emulsifiers, delivery carriers of functional substances, and natural antioxidants due to their improved solubility, emulsifying, gelling and antioxidant properties. This review provides theoretical support for controlling Maillard reaction based on protein structure.

Formation mechanism and functional properties of walnut protein isolate and soy protein isolate nanoparticles using the pH-cycle technology

Walnut protein isolate (WPI) is a nutritious protein with poor solubility, which severely limits its application. In this study, composite nanoparticles were prepared from WPI and soy protein isolate (SPI) using the pH-cycle technology. The WPI solubility increased from 12.64 to 88.53% with a WPI: SPI ratio increased from 1: 0.01 to 1: 1. Morphological and structural analyses illustrated that interaction forces with hydrogen bonding as the main effect jointly drive the binding of WPI to SPI and that protein co-folding occurs during the neutralization process, resulting in a hydrophilic rigid structure. In addition, the interfacial characterization showed that the composite nanoparticle with a large surface charge enhanced the affinity with water molecules, prevented protein aggregation, and protected the new hydrophilic structure from damage. All these parameters helped to maintain the stability of the composite nanoparticles in a neutral environment. Amino acid analysis, emulsification capacity, foaming, and stability analysis showed that the prepared WPI-based nanoparticles exhibited good nutritional and functional properties. Overall, this study could provide a technical reference for the value-added use of WPI and an alternative strategy for delivering natural food ingredients.

Plant Protein versus Dairy Proteins: A pH-Dependency Investigation on Their Structure and Functional Properties

Plant proteins are constantly gaining attention as potential substitutes for dairy proteins, due to their suitable functionality and nutritional value. This study was designed to compare the structural and functional responses of different plant protein isolates (soy, pea, lentil, and chickpea) with two commonly used dairy protein (whey protein isolates and sodium caseinate) under different pH treatments (pH 3.0, 5.0, 7.0, and 9.0). The results showed that pH had a different alteration on the structural, surface properties and functional properties of plant and dairy proteins. Plant protein generally possessed a darker color, lower solubility, emulsifying properties, and foaming capacity, whereas their foaming stability and water holding capacity were higher than those of dairy proteins. Soy protein isolates were characterized by its comparable proportion of β-turn and random coils, zeta-potential, emulsifying (30.37 m²/g), and water-holding capacity (9.03 g/g) at alkaline conditions and chickpea protein isolates showed good oil-holding capacity (3.33 g/g at pH 9) among plant proteins. Further analysis confirmed that pH had a greater influence on the structural and functional properties of proteins as compared to protein sources, particularly at acidic conditions. Overall, this study might help processors select the appropriate plant protein as dairy alternatives for their target application in plant-based food products.

Gellan gum conjugation with soy protein via Maillard-driven molecular interactions and subsequent clustering lead to conjugates with tuned technological functionality

•

Soy protein isolate (SPI) was conjugated to low acyl gellan gum (LAGG).

•

Conjugate formation was confirmed by glycation degree (DG) and structural changes.

•

SPI-LAGG conjugates were classified into low, medium, and high DG clusters.

•

A low DG was enough to enhance the techno-functional properties of SPI.

Soy proteins are frequently used in the food industry; however, they have rigid and compact structure with relatively poor interfacial properties and solubility. This study was therefore aimed to modify techno-functional characteristics of soy protein isolate (SPI; 0.1% w/v) by conjugating to low acyl gellan gum (LAGG; 0.1, 0.2, and 0.3% w/v), through the Maillard reaction (at 90 °C for 90 min). The SPI-LAGG conjugates were confirmed by changes in pH, glycation degree (DG; up to 48%), Fourier transform infrared spectroscopy, and sodium dodecyl sulphate polyacrylamide electrophoresis. The conjugates were then classified into three clusters of low, medium, and high DG, via K-means clustering method. The low DG conjugate had lower surface hydrophobicity and foaming capacity, and higher thermal stability, solubility, emulsifying properties, foam stability, and antioxidant activity compared to the other clusters. This indicated that a low DG is required to enhance the functional properties of proteins.

Physicochemical, structural, and functional properties of wampee (Clausena lansium (Lour.) Skeels) fruit peel pectin extracted with different organic acids

Effects of different extraction acids on physicochemical, structural, and functional properties of wampee fruit peel pectin (WFPP) were comparatively investigated. The hydrochloric acid extracted WFPP (HEP) exhibited the highest degrees of methylation (67.79%) and acetylation (86.29%) coupling with abundant monosaccharides and rhamnogalacturonan branches, but lowest molecular weight (5.58 × 10⁵ Da). The results of SEM, X-ray diffraction, and Fourier transform infrared spectroscopy analyses showed that acid types had little effect on the surface morphology of WFPP. However, compared to commercial citrus pectin (CCP), several specific absorbance peaks (1539, 1019, 920 cm^-1) were found in WFPPs, which corresponds to aromatic skeletal stretching, pyranose, and d-glucopyranosyl, respectively. Moreover, the rheological behavior revealed that WFPP solution was pseudoplastic fluid and affected by acid types. And the WFPPs exhibited higher emulsifying activity and emulsion stability than CCP. All these WFPPs presented well antioxidant activity and promoting probiotics ability, especially for HEP.

In Vitro Digestion and Storage Stability of β-Carotene-Loaded Nanoemulsion Stabilized by Soy Protein Isolate (SPI)-Citrus Pectin (CP) Complex/Conjugate Prepared with Ultrasound

In this study, we employed the ultrasound-prepared electrostatic complex and covalent conjugate of soy protein isolate (SPI) and citrus pectin (CP) to prepare β-carotene-loaded nanoemulsions. The in vitro digestion and storage stability of nanoemulsions stabilized by different types of emulsifiers were investigated and compared. Nanoemulsions stabilized by ultrasound-treated complex/conjugate showed the highest encapsulation efficiency; during gastric digestion, these nanoemulsions also demonstrated the smallest droplet sizes and the highest absolute values of zeta potential, indicating that both electrostatic complexation/covalent conjugation and ultrasound treatment could significantly improve the stability of the resulting nanoemulsions. In comparison, complexes were more beneficial for the controlled release of β-carotene; however, the conjugate-stabilized nanoemulsion showed an overall higher bioaccessibility. The results were also confirmed by optical micrographs. Furthermore, nanoemulsions stabilized by ultrasound-prepared complexes/conjugates exhibited the highest stability during 14-day storage at 25 °C. The results suggested that ultrasound-prepared SPI–CP complexes and conjugates had great application potential for the delivery of hydrophobic nutrients.

Effects of Different Amounts of Corn Silk Polysaccharide on the Structure and Function of Peanut Protein Isolate Glycosylation Products

Covalent complexes of peanut protein isolate (PPI) and corn silk polysaccharide (CSP) (PPI-CSP) were prepared using an ultrasonic-assisted moist heat method to improve the functional properties of peanut protein isolate. The properties of the complexes were affected by the level of corn silk polysaccharide. By increasing the polysaccharide addition, the grafting degree first increased, and then tended to be flat (the highest was 38.85%); the foaming, foam stability, and solubility were also significantly improved. In a neutral buffer, the solubility of the sample with a protein/polysaccharide ratio of 2:1 was 73.69%, which was 1.61 times higher than that of PPI. As compared with PPI, the complexes had higher thermal stability and lower surface hydrophobicity. High addition of CSP could made the secondary structure of PPI change from ordered α-helix to disordered β-sheet, β-turn, and random coil structure, and the complex conformation become more flexible and loose. The results of multiple light scattering showed that the composite solution exhibited high stability, which could be beneficial to industrial processing, storage, and transportation. Therefore, the functional properties of peanut protein isolate glycosylation products could be regulated by controlling the amount of polysaccharide added.

Micronization using combined alkaline protease hydrolysis and high-speed shearing homogenization for improving the functional properties of soy protein isolates

The present study aimed to investigate the functional properties of soybean protein isolate (SPI) treated with alkaline protease and high-speed shearing homogenization. Alkaline protease-hydrolyzed SPIs that were characterized by varying degrees of hydrolysis between 0 and 6% were treated with high-speed shearing homogenization to obtain different micro-particulate proteins. The results showed that this combined treatment could significantly reduce the particle size of SPI by markedly degrading the structure of both the 7S and 11S subunits, thereby resulting in a significantly reduced content of β-sheet and β-turn structures. The surface hydrophobicity increased considerably for samples with hydrolysis below the threshold of 2% and then declined gradually above this threshold. Furthermore, the combination of hydrolysis and homogenization significantly improved the emulsion stability of SPI hydrolysates. It also significantly improved the foaming properties of SPI. These results demonstrated that alkaline protease hydrolysis combined with high-speed shearing homogenization represents a promising approach for improving the functional and structural properties of SPI.

Interaction mechanism between soybean protein isolate and citrus pectin

In this study, citrus pectin (CP) and soybean protein isolate (SPI) were used as raw materials to prepare a complex. The interaction mechanism and structural changes between SPI and CP were deeply studied by fluorescence spectroscopy and Fourier infrared spectroscopy. The results show that CP has a strong quenching effect on SPI's endogenous fluorescence, and with the addition of CP, the endogenous fluorescence intensity of SPI decreased from 13,565.2 to 6067.3. The CP quenching of SPI is static quenching, and the number of combined bits is 1.26. The results of three-dimensional fluorescence spectra showed that the addition of CP reduced the polarity of SPI amino acid residue microenvironment and changed the protein structure. Hydrophobic interaction exists between CP and SPI. The results of three-dimensional fluorescence spectra showed that the addition of CP reduced the polarity of the amino acid residue microenvironment of SPI and changed the protein structure. Fourier transform infrared spectroscopy shows that CP could change the secondary structure of SPI by decreasing the α-helix and β-sheet, increasing β-rotation and irregular curl, destroying the ordered structure of SPI and increasing the polarity of the amino acids exposed to the solution. The microstructure analysis shows that SPI-CP composite system has honeycomb structure and dense pores. From the perspective of reaction thermodynamics, it was found that the addition of CP could improve the thermal stability of SPI and increase the denaturation temperature of SPI from 119.73 to 132.97°C. This study can provide a theoretical basis for the preparation of protein-pectin complexes and provides reference for their application in food grade gels and Pickering emulsions.

Conjugation of soy protein isolate (SPI) with pectin: effects of structural modification of the grafting polysaccharide

Recently, there has been a great interest in enhancing the emulsifying properties of soy protein isolate (SPI) by Maillard reaction. As a commonly-used grafting polysaccharide, pectin has proved useful in modifying proteins. However, effects of its structural characteristics on conjugation are still not fully understood. To address this problem, we employed alkaline or/and enzymatic treatments to modify pectin and obtained three modified samples. Structural characteristics of pectin, including the molecular weight, degree of methoxylation and acetylation, and monosaccharide compositions were measured. When conjugated with SPI, pectin with lower molecular weight and less main chains induced higher conjugate yield. Fluorescence intensity and surface hydrophobicity of all conjugates markedly reduced compared to the original SPI, suggesting a more loosened protein structure after Maillard reaction. In this study, the enzymolysis pectin proved an optimum grafting polysaccharide considering the simple preparation procedures and the highest emulsifying properties of its resulting conjugates.

Molecular structure and functional properties of glycinin conjugated to κ-carrageenan and guar gum: A comparative study

Molecular structure and functional properties of glycinin conjugated to κ-carrageenan and guar gum using a dry-heating method were comparatively analyzed. Glycosylation was confirmed by analyzing the degree of grafting, protein subunit composition, infrared absorption profile, and changes in contents of protein secondary structures. K-carrageenan was proven to possess a greater susceptibility to be grafted to glycinin than guar gum due to its relatively low molecular weight and negatively charged characteristics. The improvement of solubility by glycosylation with guar gum near the isoelectric point of glycinin was better than that by glycosylation with κ-carrageenan. Glycinin glycosylated with both polysaccharides exhibited enhanced emulsifying activity and stability. The enhanced apparent viscosity, elastic modulus, and viscous modulus also demonstrated that glycosylation promoted the appearance of stable elastic network structure. In summary, glycosylation with these two polysaccharides conferred glycinin superior emulsifying and rheological properties, and κ-carrageenan exhibited a better performance compared to guar gum.

Enzymatic synthesis, characterization and properties of the protein-polysaccharide conjugate: A review

Poor solubility of proteins negatively affects their functional properties and greatly limits their application. Enzymatic cross-linking with polysaccharides can improve solubility and functional properties of proteins. The enzymes used include transglutaminase, laccase and peroxidase. Therefore, this work introduces the cross-linking mechanisms of these enzymes and the characterization techniques, the improved properties and the potential applications of the enzymatically-synthesized protein-polysaccharide conjugate. Transglutaminase catalyzes the formation of a new peptide bond and thus works on amino-containing polysaccharides to conjugate with proteins. However, laccase and peroxidase catalyze oxidation of various compounds with phenol and aniline structures. Therefore, these two enzymes can catalyze the conjugate reaction between proteins and feruloylated polysaccharides which are widely distributed in cereal bran. Compared with the unmodified protein, the enzymatically-synthesized protein-polysaccharide conjugate usually has higher solubility and better functional properties. Thus, it is inferred that enzymatic conjugation with polysaccharide molecules can extend the application of proteins.

Maillard-Type Protein-Polysaccharide Conjugates and Electrostatic Protein-Polysaccharide Complexes as Delivery Vehicles for Food Bioactive Ingredients: Formation, Types, and Applications

Due to their combination of featured properties, protein and polysaccharide-based carriers show promising potential in food bioactive ingredient encapsulation, protection, and delivery. The formation of protein–polysaccharide complexes and conjugates involves non-covalent interactions and covalent interaction, respectively. The common types of protein–polysaccharide complex/conjugate-based bioactive ingredient delivery systems include emulsion (conventional emulsion, nanoemulsion, multiple emulsion, multilayered emulsion, and Pickering emulsion), microcapsule, hydrogel, and nanoparticle-based delivery systems. This review highlights the applications of protein–polysaccharide-based delivery vehicles in common bioactive ingredients including polyphenols, food proteins, bioactive peptides, carotenoids, vitamins, and minerals. The loaded food bioactive ingredients exhibited enhanced physicochemical stability, bioaccessibility, and sustained release in simulated gastrointestinal digestion. However, limited research has been conducted in determining the in vivo oral bioavailability of encapsulated bioactive compounds. An in vitro simulated gastrointestinal digestion model incorporating gut microbiota and a mucus layer is suggested for future studies.

Faba bean protein: A promising plant-based emulsifier for improving physical and oxidative stabilities of oil-in-water emulsions

Faba bean is a protein-rich, sustainable, but understudied legume. Faba bean protein isolates (FBPIs) can serve as promising emulsifiers. This review aims to summarize the research on FBPIs as emulsifiers and various modification methods to improve the emulsifying functionalities. The emulsifying activities of FBPIs depend on several physiochemical characteristics (e.g. solubility, surface hydrophobicity, surface charge, interfacial activity). Physical modifications, especially via linking FBPIs electrostatically to polysaccharides can effectively increase the interfacial layer thickness/compactness and maintain the interfacial protein adsorption. Chemical modifications of FBPIs (e.g. acetylation and Maillard reaction) could improve the interfacial activity and affect the droplet-size distribution. Enzymatic modifications, usually either via hydrolysis or cross-linking, help to optimize the molecular size, solubility, and surface hydrophobicity of FBPIs. It is critical to consider the lipid/protein oxidative stability and physical stability when optimizing the emulsifying functionality of FBPIs. With suitable modifications, FBPI can serve as a promising emulsifier in food production.

Effect of high intensity ultrasound on the structure and solubility of soy protein isolate-pectin complex

In this study, a soy protein isolate (SPI)-pectin (PC) complex was prepared, and the effects of different high intensity ultrasound (HIU) powers on the structure and solubility of the complex were studied. Fourier transform infrared (FTIR) spectroscopy analysis exhibited that with increasing HIU power, the α-helix content of the SPI in the complex was significantly reduced, and the random coil content increased; however, an opposite trend appeared after higher power treatments. Fluorescence spectra showed that HIU treatment increased the fluorescence intensity of the complex, and the surface hydrophobicity was increased. The trend of the protein structure studied by Raman spectroscopy was similar to that of FTIR and fluorescence spectroscopy. When the HIU treatment was performed for 15 min and at 450 W power, the particle size of the complex was 451.85 ± 2.17 nm, and the solubility was 89.04 ± 0.19 %, indicating that the HIU treatment caused the spatial conformation of the protein to loosen and improved the functional properties of the complex. Confocal laser scanning microscopy (CLSM) revealed that the complex after HIU treatment exhibited improved dispersibility in water and smaller particle size. Gel electrophoresis results indicated that HIU treatment did not affect the protein subunits of the complex. Therefore, the selection of a suitable HIU treatment power can effectively improve the structural properties and solubility of SPI in the complex, and promote the application of the SPI-PC complex in food processing and industries.

Structural and Emulsifying Properties of Soybean Protein Isolate-Sodium Alginate Conjugates under High Hydrostatic Pressure

Soybean protein isolate (SPI) is a kind of plant derived protein with high nutritional value, but it is underutilized due to its structural limitations and poor functionalities. This study aimed to investigate the effects of high hydrostatic pressure (HHP) treatment on SPI and sodium alginate (SA) conjugates prepared through the Maillard reaction. The physicochemical properties of the conjugate synthesized under 200 MPa at 60 °C for 24 h (SPI–SA–200) were compared with those of the conjugate synthesized under atmospheric pressure (SPI–SA–0.1), SPI-SA mixture, and SPI. The HHP (200 MPa) significantly hindered the Maillard reaction. This effect was confirmed by performing SDS-PAGE. The alterations in the secondary structures, such as α-helices, were analyzed using circular dichroism spectroscopy and the fluorescence intensity was determined. Emulsifying activity and stability indices of SPI-SA-200 increased by 33.56% and 31.96% respectively in comparison with the SPI–SA–0.1 conjugate. Furthermore, reduced particle sizes (356.18 nm), enhanced zeta potential (‒40.95 mV), and homogeneous droplet sizes were observed for the SPI-SA-200 emulsion. The present study details a practical method to prepare desirable emulsifiers for food processing by controlling the Maillard reaction and improving the functionality of SPI.

Structure and Applications of Pectin in Food, Biomedical, and Pharmaceutical Industry: A Review

Pectin is a biocompatible polysaccharide with intrinsic biological activity, which may exhibit different structures depending on its source or extraction method. The extraction of pectin from various industrial by-products presents itself as a green option for the valorization of agro-industrial residues by producing a high commercial value product. Pectin is susceptible to physical, chemical, and/or enzymatic changes. The numerous functional groups present in its structure can stimulate different functionalities, and certain modifications can enable pectin for countless applications in food, agriculture, drugs, and biomedicine. It is currently a trend to use pectin to produce edible coating to protect foodstuff, antimicrobial bio-based films, nanoparticles, healing agents, and cancer treatment. Advances in methodology, use of different sources of extraction, and knowledge about structural modification have significantly expanded the properties, yields, and applications of this polysaccharide. Recently, structurally modified pectin has shown better functional properties and bioactivities than the native one. In addition, pectin can be used in conjunction with a wide variety of biopolymers with differentiated properties and specific functionalities. In this context, this review presents the structural characteristics and properties of pectin and information on the modification of this polysaccharide, its respective applications, perspectives, and future challenges.

The interfacial covalent bonding of whey protein hydrolysate and pectin under high temperature sterilization: Effect on emulsion stability

In this study, the effect of high-pressure steam sterilization (121 °C for 15 min) on whey protein hydrolysate-pectin solutions and emulsions was studied. The interaction and emulsification characteristics of pectin and whey protein concentrate (WPC) were evaluated from the solution system to the emulsion system. Enzymatic hydrolysis of WPC (WPH, 2 % and 8 % degree of hydrolysis) increased the covalent binding with pectin, which reduced the heat-induced aggregation of protein and improved emulsification. The thermodynamic incompatibility between WPC and pectin was not conducive to the covalent bonding under high temperature sterilization and produced serious aggregates, which also made a rapid increase in particle size (up to ∼3 μm), compared to WPH-pectin emulsion (∼ 400 nm). In addition, if emulsion was stirred during the sterilization, the creaming and protein aggregation could be avoided. By comparing low methoxy pectin (LMP) and high methoxy pectin (HMP), it was found that the whey protein-HMP complex had better emulsification stability, and the steric stabilization played a more important role in emulsion stability than the electrostatic repulsion. The changes of whey protein and pectin at the oil-water interface of the emulsion during the sterilization process may provide a reference for the sterilized bioactive ingredient delivery system.

Current Progress in the Utilization of Soy-Based Emulsifiers in Food Applications-A Review

Soy-based emulsifiers are currently extensively studied and applied in the food industry. They are employed for food emulsion stabilization due to their ability to absorb at the oil–water interface. In this review, the emulsifying properties and the destabilization mechanisms of food emulsions were briefly introduced. Herein, the effect of the modification process on the emulsifying characteristics of soy protein and the formation of soy protein–polysaccharides for improved stability of emulsions were discussed. Furthermore, the relationship between the structural and emulsifying properties of soy polysaccharides and soy lecithin and their combined effect on the protein stabilized emulsion were reviewed. Due to the unique emulsifying properties, soy-based emulsifiers have found several applications in bioactive and nutrient delivery, fat replacer, and plant-based creamer in the food industry. Finally, the future trends of the research on soy-based emulsifiers were proposed.

Advances of plant-based structured food delivery systems on the in vitro digestibility of bioactive compounds

Food researchers are currently showing a growing interest in in vitro digestibility studies due to their importance for obtaining food products with health benefits and ensuring a balanced nutrient intake. Various bioactive food compounds are sensitive to the digestion process, which results in a lower bioavailability in the gut. The main objective of structured food delivery systems is to promote the controlled release of these compounds at the desired time/place, in addition to protecting them during digestion processes. This review provides an overview of the influence of structured delivery systems on the in vitro digestive behavior. The main delivery systems are summarized, the pros and cons of different structures are outlined, and examples of several studies that optimized the use of these structured systems are provided. In addition, we have reviewed the use of plant-based systems, which have been of interest to food researchers and the food industry because of their health benefits, improved sustainability as well as being an alternative for vegetarian, vegan and consumers suffering from food allergies. In this context, the review provides new insights and comprehensive knowledge regarding the influence of plant-based structured systems on the digestibility of encapsulated compounds and proteins/polysaccharides used in the encapsulation process.