Preparation and characterization of konjac glucomannan-based bionanocomposite film for active food packaging

Preparation of sodium alginate/konjac glucomannan active films containing lycopene microcapsules and the effects of these films on sweet cherry preservation

In this study, lycopene microcapsules (LMs) were prepared using chitosan (CS) and carboxymethyl CS (CMCS) as the wall materials. Sodium alginate (SA) and konjac glucomannan (KGM) were used as substrates to fabricate LM/SA/KGM composite films. Results showed that when 2.0 % CMCS was employed, the resulting LMs had the maximum embedding rate of 83.17 %, smallest particle sizes, and stable zeta potentials. The LMs still had a high retention rate after 10 days of storage at 4 and 25 °C. When 2.0 % LMs were used, the corresponding composite film exhibited the best antibacterial properties, oxidation resistance, a high transparency (82.3 %), and a strong water vapor barrier (2.39 × 10^-10 g/m·s·Pa). Finally, the effects of the as-prepared composite films on the preservation of sweet cherries stored at 0 °C for 15 days were investigated. The results indicated that the LM/SA/KGM composite film effectively prolonged the shelf lives of sweet cherries and efficiently delayed the decline in the decay rate, pH, contents of soluble solids, and other indicators. The application of LM/SA/KGM composite films in fruit and vegetable preservation has development prospects and provides a reference for expanding the application range of lycopene and enhancing fruit and vegetable preservation.

Konjac Glucomannan Induced Retarding Effects on the Early Hydration of Cement

Customarily, retarders serve as the setting time regulators of cement-based composites to meet the demands of various construction environments. However, the limited ability to adjust the setting time restricts the application of polysaccharides in special environments. In this study, we reported a naturally high-efficiency retarder, konjac glucomannan (KGM), and studied the mechanism of its effect on the hydration of ordinary Portland cement. Incorporating KGM could significantly prolong cement hydration without strength damage. Furthermore, the active hydroxyl group (-OH, rich in KGM) could chelate with Ca²⁺ (released from cement hydration) to form a cross-linking network, which is adsorbed on the surface of cement clinker, thereby being conducive to delaying the process of cement hydration and reducing the heat of hydration. The findings of this study are critical to the ongoing efforts to develop polysaccharide-cement-based composite materials for application in various special environments.

A pH-intelligent response fish packaging film: Konjac glucomannan/carboxymethyl cellulose/blackcurrant anthocyanin antibacterial composite film

Blackcurrant anthocyanins (BCA) can be used to improve the structure and properties of konjac glucomannan (KGM)/carboxymethyl cellulose (CMC) composite film. In this study, the microstructure of the KGM/CMC/BCA composite film was evaluated. The results show that BCA is uniformly dispersed in the KC matrix, which changes the mechanical properties of the film (tensile strength (TS): 55.00 → 38.44 MPa and elongation at break (EB): 8.60 → 3.67%) and barrier properties (water vapor permeability (WVP): 0.67 → 2.53 g·mm/m² day kPa). With the addition of BCA (0.05, 0.15, 0.20 wt%), the composite film exhibits higher thermal stability. Among them, 0.15 wt% has the best thermal stability. The composite film also shows the antioxidant and antibacterial properties of BCA, and has an inhibitory effect on food-borne pathogens. The composite film will show different colors in different buffers, which can be observed with the naked eye. Therefore, KGM/CMC/BCA film can be applied to smart food packaging to realize real-time monitoring of meat product quality.

Polyvinyl alcohol inclusion can optimize the sol-gel, mechanical and hydrophobic features of agar/konjac glucomannan system

The practical features (e.g., sol-gel, mechanical and hydrophobic) of biopolymer systems are crucial for their materials applications. This work reveals how polyvinyl alcohol (PVA) inclusion affects the practical features of agar/konjac glucomannan (KGM) system. From rheological analysis, incorporating PVA (especially 6%) enhanced the chain entanglements of resulted ternary solution (A₇₀K₂₄P₆) with stabilized sol-gel transition point. Such effect not only increased the zero-shear viscosity (ca. 1.5 times that of agar/KGM counterpart) and structural recovery degree of A₇₀K₂₄P₆ solution, but also caused reduced crystallites and simultaneously increased tensile strength, elongation at break and hydrophobicity for A₇₀K₂₄P₆ film from solution dehydration. This ternary film exhibited a tensile strength of ca. 105 MPa, an elongation at break of ca. 20%, and a water contact angle of ca. 97.6°. Additionally, incorporating PVA almost unaffected the morphology of film fracture surface. These results are valuable for the design of agar/KGM systems with improved practical features.

Structural characterization and antibacterial properties of konjac glucomannan/soluble green tea powder blend films for food packaging

Antimicrobial activity is a promising property for food packaging which could prolong the shelf life of food products. In this paper, the physicochemical and antimicrobial properties of konjac glucomannan (KGM)/soluble green tea powder (SGTP) edible films were firstly prepared and analyzed through light barrier properties, Fourier transform infrared spectroscopy (FT-IR), tensile strength (TS), X-ray diffraction (XRD), thermogravimetric analysis and scanning electron microscope (SEM). The results showed that appropriate addition of SGTP could improve the TS of composite films. With the increase of SGTP content, the transmittance of the films in the ultraviolet region decreased obviously, and the thermal stability was improved in a SGTP dependent manner. KGM/SGTP films present a fairly smooth and flat surface without any fracture when 0.5% SGTP was provided. The bacteriostatic test showed that the bacteriostatic performance of the composite films against Staphylococcus aureus and Escherichia coli was also significantly enhanced. When 1% SGTP was provided, the zones of inhibition for Escherichia coli and Staphyloccocus aureus reached to 13.45 ± 0.94 mm and 13.76 ± 0.92 mm, respectively. Overall, the KGM/SGTP films showed great potential as bioactive packaging materials to extend food shelf life.

Deacetylation enhances the properties of konjac glucomannan/agar composites

From a microstructural point of view, this work concerns how deacetylation improves the practical characteristics of deacetylated-konjac glucomannan/agar (DK/A) composite films. As disclosed by infrared spectroscopy and X-ray diffraction, the deacetylation of konjac glucomannan (KGM) enhanced the chain interactions in DK/A composites and suppressed the realignment of agar molecules into crystallites. The enhanced associations between acetyl-free regions of KGM and agar reduced the exposure of OH groups and thus increased the hydrophobicity of the composites. Besides, the partial removal of acetyl groups allowed shortened distances between chains; consequently, denser composite matrices emerged with lower water vapor permeability and higher tensile strength. Also, the KGM deacetylation increased the matrix flexibility and elongation at break for DK/A composites, associated with the hindered rearrangement of agar chains. Thus, altering the deacetylation degree of KGM may be an effective way to design KGM-based composites with improved hydrophobicity and mechanical performance.

Investigation of the structural and physical properties, antioxidant and antimicrobial activity of konjac glucomannan/cellulose nanocrystal bionanocomposite films incorporated with phlorotannin from Sargassum

In this study, environmentally friendly bionanocomposite films were prepared by incorporating phlorotannins from Sargassum (PS) into konjac glucomannan (KGM)/cotton cellulose nanocrystals (CNC) composites. The effects of different concentrations of PS (5%, 9%, 13%, and 17%, w/w) on the microstructure, physical properties, antioxidant and antibacterial activities of the resultant bionanocomposite films were evaluated. The results of scanning electron microscopy, X-ray diffraction, and Fourier-transform infrared spectra showed that PS was well compatible with the KGM/CNC composites matrix, which led to form a compact and uniform structure of the films. Thermogravimetric analysis and differential scanning calorimetry demonstrated that incorporating PS improved the heat stability of KGM/CNC bionanocomposite films. And addition of the appropriate amount of PS improved the mechanical and water-vapor barrier-related properties of the bionanocomposite film. For instance, with 9% PS, the tensile strength of the KGM/CNC/PS bionanocomposite film increased by 33.9%, and the water-vapor transmittance decreased by 41.67% compared to that of the KGM/CNC films. Moreover, the addition of PS endowed the KGM/CNC film with excellent antioxidant and antibacterial properties. Therefore, KGM/CNC/PS bionanocomposite films have great potential to be applicated as active packaging in the food packaging industry.

Fucoidan hydrogels induced by κ-carrageenan: Rheological, thermal and structural characterization

Fucoidan (FUC) is a non-gelling polysaccharide but could interact with κ-carrageenan (KC) to form a stable gel blend. However, their interaction mechanism is unclear. Herein, FUC and KC blended gels are prepared by mixing FUC (10 and 20 mg/mL) and KC (6, 7 and 8 mg/mL) solutions, and characterized through LF-NMR, rheology, DSC, Cryo-SEM, and FTIR. The FTIR analysis confirms the formation of hydrogen bonds between FUC and KC chains. The KC addition to FUC significantly improves the water retention and frost resistance. The viscoelastic measurements reveal higher gelling nature of the FUC-KC binary mixtures, and the DSC results confirm the higher thermal stability. The Cryo-SEM images clearly reveal the gel network structure. The outcome of this study deemed to further the FUC use in food and non-food applications.

Polysaccharide-Based Nanocomposites for Food Packaging Applications

The article presents a review of the literature on the use of polysaccharide bionanocomposites in the context of their potential use as food packaging materials. Composites of this type consist of at least two phases, of which the outer phase is a polysaccharide, and the inner phase (dispersed phase) is an enhancing agent with a particle size of 1-100 nm in at least one dimension. The literature review was carried out using data from the Web of Science database using VosViewer, free software for scientometric analysis. Source analysis concluded that polysaccharides such as chitosan, cellulose, and starch are widely used in food packaging applications, as are reinforcing agents such as silver nanoparticles and cellulose nanostructures (e.g., cellulose nanocrystals and nanocellulose). The addition of reinforcing agents improves the thermal and mechanical stability of the polysaccharide films and nanocomposites. Here we highlighted the nanocomposites containing silver nanoparticles, which exhibited antimicrobial properties. Finally, it can be concluded that polysaccharide-based nanocomposites have sufficient properties to be tested as food packaging materials in a wide spectrum of applications.

Comprehensive Review of Polysaccharide-Based Materials in Edible Packaging: A Sustainable Approach

Edible packaging is a sustainable product and technology that uses one kind of "food" (an edible material) to package another kind of food (a packaged product), and organically integrates food with packaging through ingenious material design. Polysaccharides are a reliable source of edible packaging materials with excellent renewable, biodegradable, and biocompatible properties, as well as antioxidant and antimicrobial activities. Using polysaccharide-based materials effectively reduces the dependence on petroleum resources, decreases the carbon footprint of the "product-packaging" system, and provides a "zero-emission" scheme. To date, they have been commercialized and developed rapidly in the food (e.g., fruits and vegetables, meat, nuts, confectioneries, and delicatessens, etc.) packaging industry. However, compared with petroleum-based polymers and plastics, polysaccharides still have limitations in film-forming, mechanical, barrier, and protective properties. Therefore, they need to be improved by reasonable material modifications (chemical or physical modification). This article comprehensively reviews recent research advances, hot issues, and trends of polysaccharide-based materials in edible packaging. Emphasis is given to fundamental compositions and properties, functional modifications, food-packaging applications, and safety risk assessment of polysaccharides (including cellulose, hemicellulose, starch, chitosan, and polysaccharide gums). Therefore, to provide a reference for the development of modern edible packaging.

Rheological Characterization of the Influence of Pomegranate Peel Extract Addition and Concentration in Chitosan and Gelatin Coatings

In this study, the effects of an agro-industrial residue with active properties, pomegranate peel extract (PPE), were evaluated on the rheological properties of potential coatings based on chitosan (C) and gelatin (G). For this, rheological properties of the polymeric solutions were investigated in relation to PPE concentration (2 or 4 mg PPE g−1 solution), and to its incorporation order into the system (in C or in CG mixture). All solutions were more viscous than elastic (G″ > G′), and the change in PPE concentration had a greater influence accentuating the viscous character of the samples in which PPE was added to the CG mixture (CGPPE2 and CGPPE4). PPE addition to the CG mixture increased the angular frequency at the moduli crossover, indicating the formation of a more resistant polymeric network. This tendency was also observed in flow results, in which PPE addition decreased the pseudoplastic behavior of the solutions, due to a greater cross-linking between the polymers and the phenolic compounds. In general, all the studied solutions showed viscosities suitable for the proposed application, and it was possible to state the importance of standardizing the addition order of the components during the preparation of a coating.

Development and characterization of electrospun nanofibers based on pullulan/chitin nanofibers containing curcumin and anthocyanins for active-intelligent food packaging

An electrospun nanofiber based on pullulan/chitin nanofibers (PCN) containing curcumin (CR) and anthocyanins (ATH) was developed using an electrospinning technique for active-intelligent food packaging. The results of scanning electron microscopy and attenuated total reflection Fourier transform infrared spectroscopy indicated that CR and ATH were successfully immobilized on the film-forming substrate based on PCN. The physical and chemical properties of nanofibers with no colorant, a single colorant, and double colorants were compared. The nanofiber containing ATH and CR (PCN/CR/ATH) had stronger antioxidant and antimicrobial activities than those of nanofibers containing CR (PCN/CR) or ATH (PCN/ATH). With respect to pH sensitivity, the color of the PCN/CR nanofibers did not change obviously, but the color of the PCN/ATH and PCN/CR/ATH nanofibers changed significantly with the change in pH. Furthermore, the PCN/CR/ATH nanofibers clearly changed color with the progressive spoilage of Plectorhynchus cinctus at room temperature. Therefore, the electrospun PCN/CR/ATH nanofiber have great application potential in active-intelligent food packaging.

Immobilization of roselle anthocyanins into polyvinyl alcohol/hydroxypropyl methylcellulose film matrix: Study on the interaction behavior and mechanism for better shrimp freshness monitoring

The roselle anthocyanin extracts (RAE) were immobilized into polyvinyl alcohol (PVA)/hydroxypropyl methylcellulose (HPMC) film matrix, their interaction behavior and mechanism was fully understood for better shrimp freshness monitoring. Structural characterizations revealed RAE was firmly immobilized PVA/HPMC matrix by hydrogen bonds. With increasing RAE contents, dramatic increases of film thickness (from 15.90 ± 0.14 to 23.20 ± 3.35 μm), tensile strength (from 45.66 ± 1.07 to 56.98 ± 0.24 MPa), light barrier and active properties (increased by 83.18% for antioxidant and 146.91%, 59.18% for antibacterial activity against E. coli and S. aureus) were observed, while hydrophobic properties decreased significantly. Owing to great ammonia-sensitive ability, the PVA/HPMC/RAE (PHR) films were applied on shrimp freshness qualitative monitoring and greater visible color variations were identified with increasing RAE contents. Furthermore, mathematical models were established for quantitative monitoring. In conclusion, with the increasing RAE contents, the tighter interaction between RAE and PVA/HPMC matrix contributed to the better functional properties and freshness monitoring effects of PHR films.

Construction of carboxymethyl konjac glucomannan/chitosan complex nanogels as potential delivery vehicles for curcumin

Construction of nanoscale delivery systems from natural food biopolymer complexes have attracted increasing interests in the fields of food industries. In this study, novel carboxymethyl konjac glucomannan/ chitosan (CMKGM/CS) nanogels with and without 1-ethyl-3-(3-dimethylaminopropyl) /N-hydroxysuccinimide) (EDC/NHS)-initiated crosslinking were prepared. The physicochemical and structural properties of the CMKGM/CS nanogels and their potential to be a delivery vehicle for curcumin were investigated. Compared to original uncrosslinked nanogels, crosslinking did not alter particle size and morphology but decreased zeta potential of nanogels. Fourier transform infrared spectrum confirmed that the amide linkage was formed between CMKGM and CS, which obviously enhanced the stability of crosslinked nanogels under gastrointestinal conditions. Furthermore, the crosslinked nanogels not only had higher encapsulation efficiency of curcumin but also better sustained release behavior under simulated gastrointestinal conditions. These findings suggested that the crosslinked CMKGM/CS nanogels might be a promising delivery system for nutrients.

Enhanced antimicrobial activity of konjac glucomannan nanocomposite films for food packaging

This paper aims at providing a new strategy for developing konjac glucomannan-based antibacterial films with excellent performances. Here, novel nanocomposite films based on photodynamic and photothermal synergism strategy were developed by incorporating graphite carbon nitride nanosheets/MoS₂ nanodots (CNMo) into konjac glucomannan (KGM) matrix. Scanning electron microscope, transmission electron microscope, high resolution transmission, high angle annular dark field and element mapping confirmed the successful fabrication of CNMo. The steady and dynamic rheological behavior as well as the good stability of film-forming solution showed that the intermolecular hydrogen bonding was formed. The influences of CNMo content on the structural, mechanical and thermal properties as well as hydrophobicity of KGM films were investigated. This film has a broad-spectrum antibacterial activity. It could prolong the shelf life of cherry tomatoes. Moreover, hemolysis and cells experiment confirm that this film is safe. This strategy is expected to broaden the application of antibacterial packaging.

Dihydromyricetin incorporated active films based on konjac glucomannan and gellan gum

Active composite films were developed by incorporating different concentration of dihydromyricetin (DMY) into konjac glucomannan (KGM)/gellan gum (GG) matrix. Physicochemical, mechanical, released behaviour, antioxidant and antimicrobial properties of composite films were investigated. The results from the Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) indicated that DMY which well-dispersed in the KGM/GG matrix interacted with matrix through hydrogen bonds. The obtained films presented predominant thermostability, good water resistance property, excellent ultraviolet light barrier ability and sustained controlled release behaviour. In particular, the incorporation of DMY remarkably enhanced the antioxidant and antimicrobial activities of the films. Overall, the fabricated KGM/GG-DMY composite films have a promising application in the fields of food packaging.

Characterization of Chitosan Films Incorporated with Different Substances of Konjac Glucomannan, Cassava Starch, Maltodextrin and Gelatin, and Application in Mongolian Cheese Packaging

Four kinds of edible composite films based on chitosan combined with additional substances (konjac glucomannan, cassava starch, maltodextrin and gelatin) and the addition of lysozyme were prepared and used as packaging materials for Mongolian cheese. The prepared composite films were evaluated using scanning electron microscopy and Fourier transform infrared spectroscopy. The physicochemical properties of all chitosan composite films, including thickness, viscosity, opacity, color, moisture content, water vapor permeability, tensile strength and elongation at break, were measured. The results show that Konjac glucomannan–chitosan composite film presented the strongest mechanical property and highest transparency. The cassava starch–chitosan composite film presented the highest water barrier property. The study on the storage characteristics of Mongolian cheese was evaluated at 4 °C. The results show that the cheese packaging by cassava starch–chitosan composite film presented better treatment performance in maintaining the quality, reducing weight loss and delayering microbial growth.

A journey to the world of fascinating ZnO nanocomposites made of chitosan, starch, cellulose, and other biopolymers: Progress in recent achievements in eco-friendly food packaging, biomedical, and water remediation technologies

Green chemistry or in other words "green world" is referred to a sustainable environment using biocompatible, biodegradable, renewable, economical, and simple materials, and methods. Without any exaggeration, the exceptional chemical and physical properties of ZnO bionanocomposites beside various utilizations, make it vital materials in research and green chemistry field. Biocompatible ZnO nanoparticles with fascinating antimicrobial, physicochemical, as well as photocatalytic performance could be applied as a prominent candidate to reinforce diverse biopolymer matrixes, for instance, chitosan, starch, cellulose, gelatin, alginate, poly(hydroxyalkanoates), carrageenan, and so on. With a combination of advantageous properties of these materials, they could be illustrated specific utilizations in different areas. In this regard, the following context focuses on highlighting the recent achievements of this category of material on three important and widely used scopes: eco-friendly food packaging, biomedical specially wound dressings, and water remediation technologies.

Electrospun antibacterial poly(vinyl alcohol)/Ag nanoparticles membrane grafted with 3,3',4,4'-benzophenone tetracarboxylic acid for efficient air filtration

In this study, poly(vinyl alcohol) (PVA) membranes containing Ag nanoparticles (AgNPs) were prepared by electrospinning and grafted copolymerization with 3,3',4,4'-benzophenone tetracarboxylic acid (BPTA) to provide better mechanical properties, lower water vapor transmittance, and higher antibacterial activity (against Staphylococcus aureus and Escherichia coli) than the PVA/AgNPs membrane. The PVA/AgNPs/BPTA membrane showed higher antibacterial activity than the other membranes, and it produced inhibition zones with diameters of 18.12 ± 0.08 and 16.41 ± 0.05 mm against S. aureus and E. coli, respectively. The PVA/AgNPs/BPTA membrane was found to be capable of promoting reactive oxygen species (ROS) formation under both light and dark conditions. Cycling experiments performed following ROS quenching showed that the best-performing composite membrane retained >70% of its original OH⋅ radical and H₂O₂ charging capacity after seven cycles. In the filtration test, the electrospun nanofibrous membranes showed high filtration efficiencies of 99.98% for sodium chloride (NaCl). In addition, these membranes maintained a relatively low pressure drop of 168 Pa with a basis weight of 2.1 g m^-2. Thus, the PVA/AgNPs/BPTA membrane was concluded to be a promising medical protective material offering the benefits of structural stability and reusability.

Impact of heating and drying temperatures on the properties of konjac glucomannan/curdlan blend films

The impact of preparation conditions including heating temperature (from 60 °C to 90 °C) and drying temperatures (from 25 °C to 90 °C) on the properties of pure curdlan film and konjac glucomannan (KGM) and curdlan blend films were analyzed. Microstructure analysis indicated the KGM addition could significantly improve the relatively poor film-forming property of curdlan. FTIR and X-ray analysis showed that at high heating temperature 90 °C, molecular interaction might be enhanced in the films due to the stretched structure of curdlan and dissociation of curdlan bundles or triple-helix structure. This was supported by the changes in the mechanical property, surface hydrophobicity, moisture barrier, and moisture tolerance property. The impacts of drying temperature were some different for the curdlan film and KGM/curdlan blend film, and were explained from the molecular hydrophilicity-hydrophobicity, compactness of the films, curdlan conformation, and molecular interaction. This work guided biodegradable film production especially with curdlan added.

A novel glucomannan incorporated functionalized carbon nanotube films: Synthesis, characterization and antimicrobial activity

A novel nanocomposite film was developed by incorporating functionalized carbon nanotube (PCNT) and gallic acid (GA) into carboxymethyl konjac glucomannan (CKGM) and gelatin (GL) matrix. The influences of the PCNT content on the structural, morphological, mechanical, barrier, thermal and antimicrobial properties of CKGM/GL nanocomposite film were discussed. The structure of PCNT@CKGM/GL nanocomposite film was characterized by FT-IR, SEM, and AFM. The crystal structure and thermal ability of the film were generated by XRD and TGA-DTG. The analyses of FT-IR revealed that the amide linkage and strong hydrogen bonding were formed between CKGM, GL, and PCNT. Moreover, the characterization of mechanical properties, moisture barrier, and antimicrobial activities indicated the benefits of adding PCNT into CKGM/GL films. The results suggested that the PCNT@CKGM/GL films exhibited antimicrobial activity against Staphylococcus aureus and Escherichia coli. Therefore, such antimicrobial nanocomposite films have the potential of maintaining the quality and prolong the shelf life of food products.

The efficacy of edible film from Konjac glucomannan and saffron petal extract to improve shelf life of fresh-cut cucumber

The efficacy of saffron petal extract (SPE; 1%-4%) incorporated into Konjac glucomannan (KGM) edible films on the quality and shelf life of fresh-cut cucumbers was evaluated. Changes in chemical, physical, and microbial properties, antioxidant activity, and total soluble phenolic contents of sliced cucumbers during storage at 4°C for 5 days were investigated. Results showed that the addition of SPE markedly reduced the water vapor permeability features of produced films, whereas the moisture content and transparency of them increased (p < .05). All the formulated films containing 1%-4% of SPE exhibited significant antimicrobial properties against the examined pathogens (Escherichia coli, Shigella sonnei, Salmonella Typhi, Staphylococcus aureus, and Bacillus cereus) both in vitro and in vivo conditions. KGM films incorporated SPE were successful in reducing mesophilic bacteria and fungi populations so that the microbial load significantly decreased as the concentrations of SPE increased and KGM + 4% of SPE was considered as the most effective treatment in decreasing the microbial content of sliced cucumbers. Total soluble solids of the treated cucumbers were significantly increased at the end of the storage in refrigerator, compared to the control sample. Moreover, antioxidant activity (DPPH assay) and total soluble phenols in treated fruit increased with storage time, while these parameters decreased with increasing concentrations of SPE incorporated into KGM film. So according to the findings, the introduced film with KGM and SPE could be considered as an edible film and be applied to preserve the fruit and vegetables quality and extend the shelf life of sliced cucumbers.