Cross-linked chitosan/liposome hybrid system for the intestinal delivery of quercetin

Anti-tumor Effect of Quercetin Loaded Chitosan Nanoparticles on Induced Colon Cancer in Wistar Rats

Purpose: This study was aimed to evaluate the site-specific drug delivery of 5-FU with chitosan (CS) as a carrier and quercetin (Qu) against induced colon cancer in Wistar rats. Methods: Cross-linked CS-Qu nanoparticles (NPs) were prepared by ionotropic gelation method. Physicochemical characterization of NPs was performed by Fourier-transform infrared (FTIR) spectroscopy, dynamic light scattering (DLS), in vitro drug release, and drug loading efficiency (LE). 1, 2-Dimethylhydrazine (DMH) and dextran sulfate sodium (DSS) were applied to induce adenocarcinoma tumors on inbred male Wistar rats' colon. The treatment group of rats was administered through enema with NPs dispersion. Hematoxylin and eosin staining were performed to the histopathological examination of tumors. Results: Zeta potential and particle size for NPs were +53.5 ± 5 mV and 179 ± 28 nm, respectively. About 96% Qu LE was obtained with a maximum release of 5.63 ±1.59% and 4.62 ± 1.33% after 24 hours in PB solution with pH values of 6 and 7.4, respectively. The numbers of 8 to 21 tumors were observed in all rats administered with DMH and DSS. Significantly decreasing of microvascular density and mitosis count was detected in the treatment group in comparison with cancerous group (P = 0.032 for the former compared to P = 0.016 for the later), respectively. Furthermore, the treatment group showed a high apoptosis rate (P = 0.038). Conclusion: The developed Qu-loaded CS NPs were good candidates for site-specific and sustained drug release in enema treatment. Decreasing of microvascular density and mitosis count, along with increasing the apoptosis percent in the treatment group proved that the NPs could have promising results in site-specific and sustained drug delivery against colorectal cancer.

Delivery of phytochemicals by liposome cargos: recent progress, challenges and opportunities

Bio-availability is a major concern in delivery of dietary phytochemicals for better bio-efficacy. The reduced bio-availability of food bioactive compounds is evident due to degradation during human digestion process which involves liberation, absorption, distribution, metabolism and elimination. The bio-efficacy of any nutrient can be increased by increasing bio-availability. Different technologies are available for engineered efficient delivery systems; still many challenges remain with advancement of delivery systems. The ease of preparedness and adaptability of liposomes has resulted in wide-range of applicability and acceptability in scientific field, especially as delivery vehicles. In view, of properties like biocompatibility and biodegradability, liposomes have been modified with different usable methodologies for delivery of phytochemicals. The aim of this review is to abridge liposomes, methods of preparation, their application as delivery cargo in dietary phytochemicals, result of using different preparation techniques on properties.

Preparation of novel molecularly imprinted magnetic graphene oxide and their application for quercetin determination

In this work, quercetin (Que) molecular imprinted polymer (MIP) material decorated on magnetic graphene oxide (MGO) with high performance was prepared for the first time using a surface-imprinting technique. Magnetic graphene oxide was synthesized using the solvothermal route. Methacrylic acid (MAA) was used as functional monomer, ethylene glycol dimethyl acrylate (EGDMA) as cross-linker; Que. was used as template, for the decoration with MIP. The prepared nanocomposite was examined by different characterization methods including fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), vibrating sample magnetometer (VSM). The adsorption performance was investigated. MGO-MIP was found to have high loading (369 mg g^-1) and selective capacity making the nanomaterial more performant than previous similar reported nanomaterials. The determination of Que. was carried out by mean of magnetic solid phase extraction method coupled with high-performance liquid chromatography (HPLC) and the extraction conditions studies were also performed out. Under the optimized conditions, MGO-MIP showed great performance for the extraction, separation and determination of Que. in green tea and serum samples, compared to the flavonoid analogs luteolin (Lut) and rutin (Rut) in the same matrix samples.

Flavonoid loaded nanoparticles as an effective measure to combat oxidative stress in Ribonuclease A

Flavonoids like quercetin and myricetin serve as naturally occurring antioxidants but their bioactivity is limited due to low aqueous solubility and oxidation under physiological conditions. In this current study, the antioxidant activity of quercetin and myricetin loaded chitosan nanoparticles during the induced oxidation of Ribonuclease A (RNase A) has been compared with the corresponding free flavonoids. Oxidation of RNase A leads to intermolecular dityrosine (DT) bond formation which shows a characteristic fluorescence emission around 405 nm. Although both quercetin and myricetin loaded nanoparticles initially exhibit lower antioxidant property compared to the free flavonoids, however, with increase in oxidant concentration over time the DT fluorescence showed greater increase for free flavonoids in comparison to the nanoparticles. The polyphenol loaded nanoparticles are also found to be effective in preventing bacterial cell damage in oxidizing medium. The slow release of flavonoids from the nanoparticles is responsible for their prolonged antioxidant effect in the oxidizing medium unlike the free flavonoids which are exhausted almost completely in the initial phase.

Application of pH-Responsive Fucoidan/Chitosan Nanoparticles to Improve Oral Quercetin Delivery

Polymeric nanoparticles based on fucoidan and chitosan were developed to deliver quercetin as a novel functional food. Through the polyelectrolyte self-assembly method, fucoidan/chitosan (F/C) nanoparticles were obtained with three different weight ratios (1/1, 3/1, and 5/1). The content of quercetin in the fucoidan/chitosan nanoparticles was in the range 110 ± 3 to 335 ± 4 mg·mL^-1, with the increase of weight ratio of fucoidan to chitosan in the nanoparticle. Physicochemically stable nanoparticles were obtained with a particle size within the 300⁻400 nm range and surface potential higher than +30 mV for the 1F/1C ratio nanoparticle and around -30 mV for the 3F/1C and 5F/1C ratios nanoparticles. The 1F/1C ratio nanoparticle became larger and more unstable as the pH increased from 2.5 to 7.4, while the 3F/1C and 5F/1C nanoparticles retained their initial characteristics. This result indicates that the latter nanoparticles were stable along the gastrointestinal tract. The quercetin-loaded fucoidan/chitosan nanoparticles showed strong antioxidant activity and controlled release under simulated gastrointestinal environments (in particular for the 3F/1C and 5F/1C ratios), preventing quercetin degradation and increasing its oral bioavailability.

Chitosan-Coated Flexible Liposomes Magnify the Anticancer Activity and Bioavailability of Docetaxel: Impact on Composition

Flexible liposomes (FLs) were developed as promising nano-carriers for anticancer drugs. Coating them with chitosan (CS) could improve their drug delivery properties. The aim of this study was to investigate the physicochemical characteristics, pharmacokinetics behavior, and cytotoxic efficacy of docetaxel (DTX)-loaded CS-coated FLs (C-FLs). DTX-loaded FLs and C-FLs were produced via thin-film evaporation and electrostatic deposition methods, respectively. To explore their physicochemical characterization, the particle size, zeta potential, encapsulation efficiency (EE%), morphology, and DTX release profiles were determined. In addition, pharmacokinetic studies were performed, and cytotoxic effect was assessed using colon cancer cells (HT29). Various FLs, dependent on the type of surfactant, were formed with particle sizes in the nano-range, 137.6 ± 6.3 to 238.2 ± 14.2 nm, and an EE% of 59⁻94%. Moreover, the zeta potential shifted from a negative to a positive value for C-FL with increased particle size and EE%, and the in vitro sustained-release profiles of C-FL compared to those of FL were evident. The optimized C-FL containing sodium deoxycholate (NDC) and dicetyl phosphate (DP) elicited enhanced pharmacokinetic parameters and cytotoxic efficiency compared to those of the uncoated ones and Onkotaxel®. In conclusion, this approach offers a promising solution for DTX delivery.

A critical review on grape polyphenols for neuroprotection: Strategies to enhance bioefficacy

The aging of populations worldwide is driving greater demands for dietary polyphenols which have been recognized as promising prophylactic and/or therapeutic agents in the context of neurodegeneration, and are ubiquitously present in plant-based diets. In particular, grape-derived products encompass a wide array of phenolic compounds purported with multiple health benefits including neuroprotective efficacy. Despite the increasing preclinical and clinical evidence demonstrating high potential of grape polyphenol (GPP)-rich botanicals in preventing and attenuating diverse neurodegenerative disorders, the limited bioavailability of GPPs, especially in the brain, generates questions as to their applications and effectiveness in neuroprotection. To address this issue, significant research efforts have been made to enhance oral bioavailability of GPPs via application of novel strategies. This review highlights some critical issues related to the bioavailability and neuroprotective efficacy of GPPs and GPP-rich botanicals. The representative bioavailability-enhancing strategies are critically reviewed to provide practical solutions for augmenting the bioefficacy of GPP-rich botanicals. Synergistic applications of encapsulation techniques (for physiochemical protection and bypassing xenobiotic metabolism) and dietary intervention strategies involving modulation of gut microbiota (for generating more bioavailable phenolic metabolites) appear promising, and may substantially enhance the bioefficacy, especially the neuroprotective efficacy, of orally consumed GPPs.

Modern Assay Techniques for Cancer Drugs: Electroanalytical and Liquid Chromatography Methods

In the past decades, patients who have chemotherapy treatment have considerably increased number. At this point, the development of rapid precise, and reliable methods are very important to analyze cancer drugs from their dosage forms, animals or human biological samples. Among all the analytical methods, electrochemical methods hold an important position with their unique properties such as specificity in the biological recognition process, fast response, and their reliability and do not need a pretreatment process. Chromatographic methods are also used in a wide range of analytical applications for the analyses of anticancer drugs. The power of chromatography comes from its ability to separate a mixture of analytes and determination of their concentrations. Chromatographic techniques can mainly be divided into gas, liquid, and supercritical fluid chromatography. In the frame of this information, this review is aimed to provide basic principles of electroanalytical and high-performance liquid chromatography methods for the analysis of cancer drugs. In addition, some selected applications for electrochemistry-related techniques and high-performance liquid chromatography, for the determination of anti-cancer pharmaceuticals published in the last five years are also discussed.

Micronutrients encapsulation in enhanced nanoliposomal carriers by a novel preparative technology

Micronutrients administration by fortification of staple and complementary foods is a followed strategy to fight malnutrition and micronutrient deficiencies and related pathologies. There is a great industrial interest in preparation of formulations for joint administration of vitamin D3 and vitamin K2 for providing bone support, promoting heart health and helping boost immunity. To respond to this topic, in this work, uncoated nanoliposomes loaded with vitamin D3 and K2 were successfully prepared, by using a novel, high-yield and semi continuous technique based on simil-microfluidic principles. By the same technique, to promote and to enhance mucoadhesiveness and stability of the produced liposomal structures, chitosan was tested as covering material. By this way polymer–lipid hybrid nanoparticles, encapsulating vitamin D3 and vitamin K2, with improved features in terms of stability, loading and mucoadhesiveness were produced for potential nutraceutical and pharmaceutical applications.

Micronutrients administration by liposomal vectors is a growing strategy in fortification processes of staple and complementary foods to fight malnutrition and micronutrient deficiencies and related pathologies.

Structural stability of liposome-stabilized oil-in-water pickering emulsions and their fate during in vitro digestion

An interesting liposome-stabilized oil-in-water Pickering emulsion shows pH-controllable and surfactant-dependent deformability whilst displaying dual delivery routes under external environment and oral-gastrointestinal conditions.

Nanoformulation of curcumin-loaded eudragit-nutriosomes to counteract malaria infection by a dual strategy: Improving antioxidant intestinal activity and systemic efficacy

In this paper, nutriosomes (phospholipid vesicles associated with Nutriose® FM06) were modified to obtain new systems aimed at enhancing the efficacy of curcumin in counteracting malaria infection upon oral administration. Eudragit® L100, a pH-sensitive co-polymer, was added to these vesicles, thus obtaining eudragit-nutriosomes, to improve their in vivo performances. Liposomes without eudragit and nutriose were also prepared as a reference. Cryo-TEM images showed the formation of multicompartment vesicles, with mean diameter around 300 nm and highly negative zeta potential. Vesicles were stable in fluids mimicking the gastro-intestinal content due to the high phospholipid concentration and the presence of gastro-resistant eudragit and digestion-resistant nutriose. Eudragit-nutriosomes disclosed promising performances in vitro and in vivo: they maximized the ability of curcumin to counteract oxidative stress in intestinal cells (Caco-2), which presumably reinforced its systemic efficacy. Orally-administered curcumin-loaded eudragit-nutriosomes increased significantly the survival of malaria-infected mice relative to free curcumin-treated controls.

Lecithin-Stabilized Polymeric Micelles (LsbPMs) for Delivering Quercetin: Pharmacokinetic Studies and Therapeutic Effects of Quercetin Alone and in Combination with Doxorubicin

In this study, lecithin-stabilized polymeric micelles (L_sbPMs) were prepared to load quercetin (QUE) in order to improve its bioavailability and increase its antitumor activity. Its combination with doxorubicin (DOX) to minimize DOX-mediated cardiac toxicity and increase the antitumor activity of QUE-loaded L_sbPMs was also examined. L_sbPMs were prepared following a previously reported procedure. Results demonstrated that optimal QUE-loaded L_sbPMs contained quercetin, D-α-tocopheryl polyethylene glycol succinate, and lecithin at a weight ratio of 6:40:80. Drug-release studies showed that QUE released from L_sbPMs followed a controlled release pattern. A cytotoxicity assay revealed that QUE-loaded L_sbPMs had significant anticancer activities against MCF-7, SKBR-3, and MDA-MB-231 human breast cancer cells and CT26 mouse colon cancer cells. In animal studies, intravenous administration of QUE-loaded L_sbPMs resulted in efficient growth inhibition of CT26 colon cancer cells in a Balb/c mice model. In a pharmacokinetics study compared to free QUE, intravenous and oral administration of QUE-loaded L_sbPMs was found to have significantly increased the relative bioavailability to 158% and 360%, respectively, and the absolute bioavailability to 5.13%. The effect of QUE-loaded L_sbPMs in combination with DOX resulted in efficient growth inhibition of CT26 colon cancer cells and reduced cardiac toxicity in the Balb/c mice model.

The effect of sterol derivatives on properties of soybean and egg yolk lecithin liposomes: Stability, structure and membrane characteristics

The effects of three kinds of sterols (cholesterol, β-sitosterol and ergosterol) on the stability, microstructure and membrane properties of soybean and egg yolk lecithin liposomes were investigated by light scattering, transmission electron microscope (TEM), atomic force microscope (AFM), fluorescence and Fourier transform infrared spectroscopy (FTIR). The vesicle size of cholesterol or β-sitosterol incorporated liposomes was higher than that of the control and ergosterol incorporated ones, while the zeta-potential was similar when the same lecithin was used. Due to the excellent emulsifying capacity, Tween-80 was introduced into the system and which could obviously maintain the liposomal vesicle size in fetal bovine serum. According to TEM and AFM, the phenomena of membrane fusion and deformation were observed respectively in ergosterol-incorporated liposomes. Results of fluorescence probe spectra revealed the most compact membrane structure was found in cholesterol-incorporated liposomes, which was in accordance with the strongest intermolecular interaction in bilayers obtained by FTIR results. Conversely, the membrane of ergosterol-incorporated liposomes was the most fragile and fluid, which was also identified with the lowest physical stability obtained by Turbiscan. These results systematically illustrated the relationship between the structure of sterols and the liposomal membrane stability, and provided some meaningful information on the choice of sterols and lecithin in preparation of liposomes for different purposes.

Polyelectrolyte Multicomponent Colloidosomes Loaded with Nisin Z for Enhanced Antimicrobial Activity against Foodborne Resistant Pathogens

Food grade micro- or nano-carrier systems (NCS) are being developed to improve the controlled release of antimicrobial agents. To augment the stability of liposomal NCS and to overcome the limitations associated with the use of free bacteriocin (nisin) in the food system, multi-component colloidosomes (MCCS) were developed by electrostatic interactions between anionic alginate and cationic chitosan (multilayer) around phospholipids based liposomes (core). Zeta-sizer results revealed the average diameter of 145 ± 2 nm, 596 ± 3 nm, and 643 ± 5 nm for nano-liposome (NL), chitosomes (chitosan coated NL) and MCCS, respectively. Zeta potential values of NCS varied from −4.37 ± 0.16 mV to 33.3 ± 6 mV, thus both chitosomes (CS) and MCCS were positively charged. Microstructure analysis by scanning electron microscope (SEM) revealed relatively higher size of MCCS with smooth and round morphology. TGA and DSC based experiments revealed that MCCS were thermally more stable than uncoated liposomes. Encapsulation efficiency of nisin in MCCS was observed to be 82.9 ± 4.1%, which was significantly higher than NL (56.5 ± 2.5%). FTIR analyses confirmed the cross-linking between sodium alginate and chitosan layer. Both qualitative (growth kinetics) and quantitative (colony forming unit) antimicrobial assays revealed that nisin loaded MCCS have superior potential to control resistant foodborne pathogens including Staphylococcus aureus, Listeria monocytogenes, and Enterococcus faecalis, (5.8, 5.4, and 6.1 Log CFUmL⁻¹ reduction, respectively) as compared to free nisin, loaded NL or CS. Controlled release kinetics data fitted with Korsmeyer–Peppas model suggested that nisin release from MCCS followed Fickian diffusion. Cytotoxic studies on human blood cells and HepG2 cell lines revealed hemocompatibility and non-toxicity of MCCS. Thus, due to enhanced controlled release, stability and biocompatibility; these multi-component colloidosomes can be useful for incorporating antimicrobial agents into functional foods, beverages and pharmaceutical products to combat pathogenic and spoilage bacteria.

Nanodesign of new self-assembling core-shell gellan-transfersomes loading baicalin and in vivo evaluation of repair response in skin

Gellan nanohydrogel and phospholipid vesicles were combined to incorporate baicalin in new self-assembling core-shell gellan-transfersomes obtained by an easy, scalable method. The vesicles were small in size (~107 nm) and monodispersed (P.I. ≤ 0.24), forming a viscous system (~24 mPa/s) as compared to transfersomes (~1.6 mPa/s), as confirmed by rheological studies. Gellan was anchored to the bilayer domains through cholesterol, and the polymer chains were distributed onto the outer surface of the bilayer, thus forming a core-shell structure, as suggested by SAXS analyses. The optimal carrier ability of core-shell gellan-transfersomes was established by the high deposition of baicalin in the skin (~11% in the whole skin), especially in the deeper tissue (~8% in the dermis). Moreover, their ability to improve baicalin efficacy in anti-inflammatory and skin repair tests was confirmed in vivo in mice, providing the complete skin restoration and inhibiting all the studied inflammatory markers.

Stimuli-responsive liposomes for drug delivery

The ultimate goal of drug delivery is to increase the bioavailability and reduce the toxic side effects of the active pharmaceutical ingredient (API) by releasing them at a specific site of action. In the case of antitumor therapy, association of the therapeutic agent with a carrier system can minimize damage to healthy, nontarget tissues, while limit systemic release and promoting long circulation to enhance uptake at the cancerous site due to the enhanced permeation and retention effect (EPR). Stimuli-responsive systems have become a promising way to deliver and release payloads in a site-selective manner. Potential carrier systems have been derived from a wide variety of materials, including inorganic nanoparticles, lipids, and polymers that have been imbued with stimuli-sensitive properties to accomplish triggered release based on an environmental cue. The unique features in the tumor microenvironment can serve as an endogenous stimulus (pH, redox potential, or unique enzymatic activity) or the locus of an applied external stimulus (heat or light) to trigger the controlled release of API. In liposomal carrier systems triggered release is generally based on the principle of membrane destabilization from local defects within bilayer membranes to effect release of liposome-entrapped drugs. This review focuses on the literature appearing between November 2008-February 2016 that reports new developments in stimuli-sensitive liposomal drug delivery strategies using pH change, enzyme transformation, redox reactions, and photochemical mechanisms of activation. WIREs Nanomed Nanobiotechnol 2017, 9:e1450. doi: 10.1002/wnan.1450 For further resources related to this article, please visit the WIREs website.

Nanoencapsulation strategies for the delivery of novel bifunctional antioxidant/σ1 selective ligands

Nowadays sigma-1 receptors are considered as new therapeutic objectives for central nervous system neurodegenerative diseases. Among different molecules, alpha lipoic acid has been identified as a natural potent antioxidant drug, whose therapeutic efficacy is limited by its many drawbacks, such as fast metabolism, poor bioavailability and high physico-chemical instability. Alfa-lipoic acid derivatives have been recently developed demonstrating their neuroprotective activity and effectiveness in different types of oxidative stress. In this work, two derivatives containing an amide or an ester functional group with different lipophilicity, were selected for their important affinity for sigma-1 receptors. Herein, in order to improve the in vitro stability and antioxidant effectiveness of alpha-lipoic acid derivatives, we focused our efforts in the nanoencapsulation strategies. Aqueous-core nanocapsules for the delivery of the hydrophilic compound and nanostructured lipid carrier for the lipophilic derivative, were properly designed and prepared using a direct or inverse eco-friendly organic solvent-free procedure. All nanosystems were characterized in terms of mean size, polydispersity, stability, morphology, encapsulation efficiency and in vitro release profiles. In order to evaluate the nanocarriers biocompatibility and antioxidant effectiveness, in vitro biological studies (cell viability, total antioxidant capacity and total oxidative status) were developed on primary human whole blood cell cultures, on both unloaded and derivatives-loaded nanodevices.

Encapsulation of flavonoids in liposomal delivery systems: the case of quercetin, kaempferol and luteolin

The instability of dietary flavonoids is currently a challenge for their incorporation in functional foods.

Advances in Hybrid Polymer-Based Materials for Sustained Drug Release

The use of biomaterials composed of organic pristine components has been successfully described in several purposes, such as tissue engineering and drug delivery. Drug delivery systems (DDS) have shown several advantages over traditional drug therapy, such as greater therapeutic efficacy, prolonged delivery profile, and reduced drug toxicity, as evidenced by in vitro and in vivo studies as well as clinical trials. Despite that, there is no perfect delivery carrier, and issues such as undesirable viscosity and physicochemical stability or inability to efficiently encapsulate hydrophilic/hydrophobic molecules still persist, limiting DDS applications. To overcome that, biohybrid systems, originating from the synergistic assembly of polymers and other organic materials such as proteins and lipids, have recently been described, yielding molecularly planned biohybrid systems that are able to optimize structures to easily interact with the targets. This work revised the biohybrid DDS clarifying their advantages, limitations, and future perspectives in an attempt to contribute to further research of innovative and safe biohybrid polymer-based system as biomaterials for the sustained release of active molecules.

Spongy bilayer dressing composed of chitosan-Ag nanoparticles and chitosan-Bletilla striata polysaccharide for wound healing applications

The purpose of this study was to develop a promising wound dressing. Though chitosan cross-linked with genipin has been widely used as biomaterials, with the addition of partially oxidized Bletilla striata polysaccharide, the newly developed material in this study (coded as CSGB) showed less gelling time, more uniform aperture distribution, higher water retention, demanded mechanical strength and more L929 cell proliferation compared to the chitosan cross-linked only with genipin. Owning to partial blocking of free amino groups of chitosan, CSGB revealed almost no antibacterial activities, thus the bilayer composite of chitosan-silver nanoparticles (CS-AgG) on CSGB was designed to inhibit microbial invasion. The in vivo studies indicated that both CSGB and bilayer wound dressing significantly accelerated the healing rate of cutaneous wounds in mice, and the bilayer exhibited better mature epidermization with less inflammatory cells on Day 7. Therefore, this novel bilayer composite has great potential in wound dressing applications.

Solid lipid nanoparticles coated with cross-linked polymeric double layer for oral delivery of curcumin

Solid lipid nanoparticles (SLNs) are regarded as promising carriers to improve the safety and effectiveness of delivery for drugs and nutrients, however, the clinic applications for oral administration are limited by their poor stability in gastrointestinal conditions. In this study, surface modification was explored to confer new physicochemical properties to SLNs and thus achieve enhanced functionalities. Novel SLNs with biopolymeric double layer (DL) coating using two natural biopolymers, i.e. caseinate (NaCas) and pectin, were prepared to encapsulate and deliver curcumin, a lipophilic bioactive compound studied as a model drug/nutrient. The DL coating was chemically cross-linked by creating covalent bonds between NaCas and pectin, using two different cross-linkers, i.e. glutaraldehyde (GA) and 1-Ethyl-3-(3-dimethylaminopropyl) carbodiimide/N-Hydroxysuccinimide (EDC/NHS). Prior to cross-linking, the mean particle size, polydispersity index and zeta potential of DL-SLNs were 300-330nm, 0.25-0.30, -45-40mV, respectively. It was found that cross-linking with GA had a more prominent effect on particle size and polydispersity index than EDC/NHS. The cross-linking process significantly improved physicochemical properties of DL-SLNs, resulting in higher encapsulation efficiency and loading capacity, better stability and slower release profile in simulated gastrointestinal conditions. Particularly, an optimal zero-order release kinetic was observed for EDC/NHS crosslinked DL-SLNs. The electron microscopy revealed that both cross-linked DL-SLNs exhibited spherical shape with homogeneous size and smooth surface. Encapsulation of curcumin in SLNs dramatically enhanced its antioxidant activity in aqueous condition. The cross-linking process further helped spray drying of SLNs by forming homogenous powder particles. These results indicated that coating with cross-linked polymers could significantly improve the physicochemical properties of SLNs and expand their potentials as oral delivery systems for lipophilic nutrients and drugs.

Polyelectrolyte Complex Based Interfacial Drug Delivery System with Controlled Loading and Improved Release Performance for Bone Therapeutics

An improved interfacial drug delivery system (DDS) based on polyelectrolyte complex (PEC) coatings with controlled drug loading and improved release performance was elaborated. The cationic homopolypeptide poly(l-lysine) (PLL) was complexed with a mixture of two cellulose sulfates (CS) of low and high degree of substitution, so that the CS and PLL solution have around equal molar charged units. As drugs the antibiotic rifampicin (RIF) and the bisphosphonate risedronate (RIS) were integrated. As an important advantage over previous PEC systems this one can be centrifuged, the supernatant discarded, the dense pellet phase (coacervate) separated, and again redispersed in fresh water phase. This behavior has three benefits: (i) Access to the loading capacity of the drug, since the concentration of the free drug can be measured by spectroscopy; (ii) lower initial burst and higher residual amount of drug due to removal of unbound drug and (iii) complete adhesive stability due to the removal of polyelectrolytes (PEL) excess component. It was found that the pH value and ionic strength strongly affected drug content and release of RIS and RIF. At the clinically relevant implant material (Ti40Nb) similar PEC adhesive and drug release properties compared to the model substrate were found. Unloaded PEC coatings at Ti40Nb showed a similar number and morphology of above cultivated human mesenchymal stem cells (hMSC) compared to uncoated Ti40Nb and resulted in considerable production of bone mineral. RIS loaded PEC coatings showed similar effects after 24 h but resulted in reduced number and unhealthy appearance of hMSC after 48 h due to cell toxicity of RIS.

Innovative hybrid vs polymeric nanocapsules: The influence of the cationic lipid coating on the "4S"

Polymeric and hybrid aqueous-core nanocapsules were prepared using a low energy organic-solvent free procedure as innovative nanodevices for the ophthalmic delivery of melatonin. In order to evaluate how different cationic lipids could affect the main properties of the nanodevices, we focused our attention on mean particles size, surface charge, shape and stability (the "4S"). The results of our study confirmed the hypothesis that the coating material differently affects the overall nanoparticles properties, above all in terms of morphology: in particular, the cationic lipid dimethyldioctadecylammonium bromide allows the formation of very stable well-defined nanocapsules with non-spherical shape with sustained and prolonged drug release, thus representing a great advantage in ophthalmic application.

Soya nuggets – a potential carrier: swelling kinetics and release of hydrophobic drugs

Soya nuggets were used as a drug delivery vehicle. The swelling degree of the soya nuggets was responsible for efficient drug loading and release.