Metabolic Engineering for Expanding the Substrate Range of Yarrowia lipolytica

Microbial synthesis of wax esters

Microbial synthesis of wax esters (WE) from low-cost renewable and sustainable feedstocks is a promising path to achieve cost-effectiveness in biomanufacturing. WE are industrially high-value molecules, which are widely used for applications in chemical, pharmaceutical, and food industries. Since the natural WE resources are limited, the WE production mostly rely on chemical synthesis from rather expensive starting materials, and therefore solution are sought from development of efficient microbial cell factories. Here we report to engineer the yeast Yarrowia lipolytica and bacterium Escherichia coli to produce WE at the highest level up to date. First, the key genes encoding fatty acyl-CoA reductases and wax ester synthase from different sources were investigated, and the expression system for two different Y. lipolytica hosts were compared and optimized for enhanced WE production and the strain stability. To improve the metabolic pathway efficiency, different carbon sources including glucose, free fatty acid, soybean oil, and waste cooking oil (WCO) were compared, and the corresponding pathway engineering strategies were optimized. It was found that using a lipid substrate such as WCO to replace glucose led to a 60-fold increase in WE production. The engineered yeast was able to produce 7.6 g/L WE with a yield of 0.31 (g/g) from WCO within 120 h and the produced WE contributed to 57% of the yeast DCW. After that, E. coli BL21(DE3), with a faster growth rate than the yeast, was engineered to significantly improve the WE production rate. Optimization of the expression system and the substrate feeding strategies led to production of 3.7-4.0 g/L WE within 40 h in a 1-L bioreactor. The predominant intracellular WE produced by both Y. lipolytica and E. coli in the presence of hydrophobic substrates as sole carbon sources were C₃₆, C₃₄ and C₃₂, in an order of decreasing abundance and with a large proportion being unsaturated. This work paved the way for the biomanufacturing of WE at a large scale.

Western Blotting of Membrane-Bound Proteins in Yarrowia lipolytica

With the discovery of Western blotting as first described by Towbin et al. in 1979, the transfer and visualization of electrophoretically separated proteins on membranes has become the de facto method for the qualitative and quantitative detection of proteins of interest. In this method, proteins are resolved by electrophoresis on a polyacrylamide gel, followed by a transfer of the separated proteins onto a nitrocellulose or polyvinyl difluoride (PVDF) membrane. Once immobilized on these membranes, the protein of interest can be detected and visualized by exploiting antigen-antibody interactions. However, not all proteins are amenable to easy detection by Western blotting. Integral membrane proteins are a class of proteins that are attached to a biological membrane through a series of transmembrane segments that span the width of the membrane. Due to the inherent hydrophobicity of these proteins and their tendency to aggregate, the characterization and detection of these proteins can be challenging. In this methods chapter, we present a protocol for the easy detection and quantification of these proteins in the industrially important oleaginous yeast Yarrowia lipolytica. The first protocol describes a Western blotting procedure to quantify soluble cytosolic proteins of interest in Yarrowia lipolytica from its total cell lysate. The second protocol describes modifications to the first that are done to enhance detection and quantification of membrane-bound proteins in Yarrowia lipolytica from its total cell lysate, without the need for isolating the membrane-bound proteins, for use in Western blotting. The immunoblotting strategies described here should serve as an efficient and simple guide to quantify both cytosolic and the intractable membrane-bound proteins in Yarrowia lipolytica.

Yarrowia lipolytica Strains and Their Biotechnological Applications: How Natural Biodiversity and Metabolic Engineering Could Contribute to Cell Factories Improvement

Among non-conventional yeasts of industrial interest, the dimorphic oleaginous yeast Yarrowia lipolytica appears as one of the most attractive for a large range of white biotechnology applications, from heterologous proteins secretion to cell factories process development. The past, present and potential applications of wild-type, traditionally improved or genetically modified Yarrowia lipolytica strains will be resumed, together with the wide array of molecular tools now available to genetically engineer and metabolically remodel this yeast. The present review will also provide a detailed description of Yarrowia lipolytica strains and highlight the natural biodiversity of this yeast, a subject little touched upon in most previous reviews. This work intends to fill this gap by retracing the genealogy of the main Yarrowia lipolytica strains of industrial interest, by illustrating the search for new genetic backgrounds and by providing data about the main publicly available strains in yeast collections worldwide. At last, it will focus on exemplifying how advances in engineering tools can leverage a better biotechnological exploitation of the natural biodiversity of Yarrowia lipolytica and of other yeasts from the Yarrowia clade.

Combined adaptive evolution and transcriptomic profiles reveal aromatic aldehydes tolerance mechanisms in Yarrowia lipolytica

Yarrowia lipolytica is an efficient oleaginous yeast, whereas its activity is typically reduced by inhibitors present in lignocellulosic hydrolysate. Understanding the response mechanism of Y. lipolytica to hydrolysate inhibitors and developing inhibitor tolerant strains are vital to lignocellulose valorization by this promising species. In this study, through adaptive laboratory evolution on three representative aromatic aldehyde inhibitors, evolved strains were obtained. Fermentation phenotype suggested that aromatic aldehydes conversion was one main reason for high tolerance of adapted strains. Transcriptome profiling analysis and reverse metabolic engineering confirmed that overexpressing the aldehyde ketone reductase gene YALI0_B07117g and aldehyde dehydrogenase gene YALI0_B01298g effectively converted aromatic aldehyde to corresponding alcohols and acids. The potential degradation pathways for aromatic aldehyde inhibitors in Y. lipolytica XYL+ were then discussed. This study provided insights to the aromatic aldehyde degradation in Y. lipolytica and a reliable basis for the development of aromatic aldehyde tolerant strains.

Comparative Genomics Analysis of Keratin-Degrading Chryseobacterium Species Reveals Their Keratinolytic Potential for Secondary Metabolite Production

A promising keratin-degrading strain from the genus Chryseobacterium (Chryseobacterium sp. KMC2) was investigated using comparative genomic tools against three publicly available reference genomes to reveal the keratinolytic potential for biosynthesis of valuable secondary metabolites. Genomic features and metabolic potential of four species were compared, showing genomic differences but similar functional categories. Eleven different secondary metabolite gene clusters of interest were mined from the four genomes successfully, including five common ones shared across all genomes. Among the common metabolites, we identified gene clusters involved in biosynthesis of flexirubin-type pigment, microviridin, and siderophore, showing remarkable conservation across the four genomes. Unique secondary metabolite gene clusters were also discovered, for example, ladderane from Chryseobacterium sp. KMC2. Additionally, this study provides a more comprehensive understanding of the potential metabolic pathways of keratin utilization in Chryseobacterium sp. KMC2, with the involvement of amino acid metabolism, TCA cycle, glycolysis/gluconeogenesis, propanoate metabolism, and sulfate reduction. This work uncovers the biosynthesis of secondary metabolite gene clusters from four keratinolytic Chryseobacterium species and shades lights on the keratinolytic potential of Chryseobacterium sp. KMC2 from a genome-mining perspective, can provide alternatives to valorize keratinous materials into high-value bioactive natural products.

Lipid production by oleaginous yeasts

Microbial lipid production has been studied extensively for years; however, lipid metabolic engineering in many of the extraordinarily high lipid-accumulating yeasts was impeded by inadequate understanding of the metabolic pathways including regulatory mechanisms defining their oleaginicity and the limited genetic tools available. The aim of this review is to highlight the prominent oleaginous yeast genera, emphasizing their oleaginous characteristics, in conjunction with diverse other features such as cheap carbon source utilization, withstanding the effect of inhibitory compounds, commercially favorable fatty acid composition-all supporting their future development as economically viable lipid feedstock. The unique aspects of metabolism attributing to their oleaginicity are accentuated in the pretext of outlining the various strategies successfully implemented to improve the production of lipid and lipid-derived metabolites. A large number of in silico data generated on the lipid accumulation in certain oleaginous yeasts have been carefully curated, as suggestive evidences in line with the exceptional oleaginicity of these organisms. The different genetic elements developed in these yeasts to execute such strategies have been scrupulously inspected, underlining the major types of newly-found and synthetically constructed promoters, transcription terminators, and selection markers. Additionally, there is a plethora of advanced genetic toolboxes and techniques described, which have been successfully used in oleaginous yeasts in the recent years, promoting homologous recombination, genome editing, DNA assembly, and transformation at remarkable efficiencies. They can accelerate and effectively guide the rational designing of system-wide metabolic engineering approaches pinpointing the key targets for developing industrially suitable yeast strains.

Screening and Growth Characterization of Non-conventional Yeasts in a Hemicellulosic Hydrolysate

Lignocellulosic biomass is an attractive raw material for the sustainable production of chemicals and materials using microbial cell factories. Most of the existing bioprocesses focus on second-generation ethanol production using genetically modified Saccharomyces cerevisiae, however, this microorganism is naturally unable to consume xylose. Moreover, extensive metabolic engineering has to be carried out to achieve high production levels of industrially relevant building blocks. Hence, the use of non-Saccharomyces species, or non-conventional yeasts, bearing native metabolic routes, allows conversion of a wide range of substrates into different products, and higher tolerance to inhibitors improves the efficiency of biorefineries. In this study, nine non-conventional yeast strains were selected and screened on a diluted hemicellulosic hydrolysate from Birch. Kluyveromyces marxianus CBS 6556, Scheffersomyces stipitis CBS 5773, Lipomyces starkeyi DSM 70295, and Rhodotorula toruloides CCT 7815 were selected for further characterization, where their growth and substrate consumption patterns were analyzed under industrially relevant substrate concentrations and controlled environmental conditions in bioreactors. K. marxianus CBS 6556 performed poorly under higher hydrolysate concentrations, although this yeast was determined among the fastest-growing yeasts on diluted hydrolysate. S. stipitis CBS 5773 demonstrated a low growth and biomass production while consuming glucose, while during the xylose-phase, the specific growth and sugar co-consumption rates were among the highest of this study (0.17 h^–1 and 0.37 g/gdw*h, respectively). L. starkeyi DSM 70295 and R. toruloides CCT 7815 were the fastest to consume the provided sugars at high hydrolysate conditions, finishing them within 54 and 30 h, respectively. R. toruloides CCT 7815 performed the best of all four studied strains and tested conditions, showing the highest specific growth (0.23 h^–1), substrate co-consumption (0.73 ± 0.02 g/gdw*h), and xylose consumption (0.22 g/gdw*h) rates. Furthermore, R. toruloides CCT 7815 was able to produce 10.95 ± 1.37 gL^–1 and 1.72 ± 0.04 mgL^–1 of lipids and carotenoids, respectively, under non-optimized cultivation conditions. The study provides novel information on selecting suitable host strains for biorefinery processes, provides detailed information on substrate consumption patterns, and pinpoints to bottlenecks possible to address using metabolic engineering or adaptive evolution experiments.

Identification and Characterization of the Mitochondrial Replication Origin for Stable and Episomal Expression in Yarrowia lipolytica

Episomal plasmids are crucial expression tools for recombinant protein production and genome editing. In Saccharomyces cerevisiae, 2-μm artificial plasmids with a high copy number have been developed and used in metabolic engineering and synthetic biology. However, in unconventional yeasts such as Yarrowia lipolytica, episomal expression relies on a chromosome replication system; this system has the disadvantages of genetic instability and low copy numbers. In this study, we identified and characterized replication origins from the mitochondrial DNA (mtDNA) of Y. lipolytica. A 516-bp mtDNA sequence, mtORI, was confirmed to mediate the autonomous replication of circular plasmids with high protein expression levels and hereditary stability. However, the nonhomologous end-joining pathway could interfere with mtORI plasmid replication and engender genetic heterogeneity. In the Po 1f ΔKu70 strain, the homogeneity of the mtORI plasmid was significantly improved, and the highest copy number reached 5.0 per cell. Overall, mitochondrial-origin sequences can be used to establish highly stable and autonomously replicating plasmids, which can be a powerful supplement to the current synthetic biology tool library and promote the development of Y. lipolytica as a microbial cell factory.

Multiple gene integration to promote erythritol production on glycerol in Yarrowia lipolytica

OBJECTIVE

Erythritol (1,2,3,4-butanetetrol) is a 4-carbon sugar alcohol that occurs in nature as a metabolite or storage compound. In this study, a multiple gene integration strategy was employed to enhance erythritol production in Y. lipolytica.

RESULTS

The effects on the production of erythritol in Y. lipolytica of seven key genes involved in the erythritol synthesis pathway were evaluated individually, among which transketolase (TKL1) and transaldolase (TAL1) showed important roles in enhancing erythritol production. The combined overexpression of four genes (GUT1, TPI1, TKL1, TAL1) and disruption of the EYD1 gene (encoding erythritol dehydrogenase), resulted in produce approximately 40 g/L erythritol production from glycerol. Further enhanced erythritol synthesis was obtained by overexpressing the RKI1 gene (encoding ribose 5-phosphate isomerase) and the AMPD gene (encoding AMP deaminase), indicating for the first time that these two genes are also related to the enhancement of erythritol production in Y. lipolytica.

CONCLUSIONS

A combined gene overexpression strategy was developed to efficiently improve the production of erythritol in Y. lipolytica, suggesting a great capacity and promising potential of this non-conventional yeast in converting glycerol into erythritol.

Application of Random Mutagenesis and Synthetic FadR Promoter for de novo Production of ω-Hydroxy Fatty Acid in Yarrowia lipolytica

As a means to develop oleaginous biorefinery, Yarrowia lipolytica was utilized to produce ω-hydroxy palmitic acid from glucose using evolutionary metabolic engineering and synthetic FadR promoters for cytochrome P450 (CYP) expression. First, a base strain was constructed to produce free fatty acids (FFAs) from glucose using metabolic engineering strategies. Subsequently, through ethyl methanesulfonate (EMS)-induced random mutagenesis and fluorescence-activated cell sorting (FACS) screening, improved FFA overproducers were screened. Additionally, synthetic promoters containing bacterial FadR binding sequences for CYP expression were designed to respond to the surge of the concentration of FFAs to activate the ω-hydroxylating pathway, resulting in increased transcriptional activity by 14 times from the third day of culture compared to the first day. Then, endogenous alk5 was screened and expressed using the synthetic FadR promoter in the developed strain for the production of ω-hydroxy palmitic acid. By implementing the synthetic FadR promoter, cell growth and production phases could be efficiently decoupled. Finally, in batch fermentation, we demonstrated de novo production of 160 mg/L of ω-hydroxy palmitic acid using FmeN3-TR1-alk5 in nitrogen-limited media. This study presents an excellent example of the production of ω-hydroxy fatty acids using synthetic promoters with bacterial transcriptional regulator (i.e., FadR) binding sequences in oleaginous yeasts.

Stable isotope and chemical inhibition analyses suggested the existence of a non-mevalonate-like pathway in the yeast Yarrowia lipolytica

Methyl erythritol phosphate (MEP) is the metabolite found in the MEP pathway for isoprenoid biosynthesis, which is known to be utilized by plants, algae, and bacteria. In this study, an unprecedented observation was found in the oleaginous yeast Yarrowia lipolytica, in which one of the chromatographic peaks was annotated as MEP when cultivated in the nitrogen limiting condition. This finding raised an interesting hypothesis of whether Y. lipolytica utilizes the MEP pathway for isoprenoid biosynthesis or not, because there is no report of yeast harboring the MEP pathway. Three independent approaches were used to investigate the existence of the MEP pathway in Y. lipolytica; the spiking of the authentic standard, the MEP pathway inhibitor, and the ¹³C labeling incorporation analysis. The study suggested that the mevalonate and MEP pathways co-exist in Y. lipolytica and the nitrogen limiting condition triggers the utilization of the MEP pathway in Y. lipolytica.

Advanced Strategies for the Synthesis of Terpenoids in Yarrowia lipolytica

Terpenoids are an important class of secondary metabolites that play an important role in food, agriculture, and other fields. Microorganisms are rapidly emerging as a promising source for the production of terpenoids. As an oleaginous yeast, Yarrowia lipolytica contains a high lipid content which indicates that it must produce high amounts of acetyl-CoA, a necessary precursor for the biosynthesis of terpenoids. Y. lipolytica has a complete eukaryotic mevalonic acid (MVA) pathway but it has not yet seen commercial use due to its low productivity. Several metabolic engineering strategies have been developed to improve the terpenoids production of Y. lipolytica, including developing the orthogonal pathway for terpenoid synthesis, increasing the catalytic efficiency of terpenoids synthases, enhancing the supply of acetyl-CoA and NADPH, expressing rate-limiting genes, and modifying the branched pathway. Moreover, most of the acetyl-CoA is used to produce lipid, so it is an effective strategy to strike a balance of precursor distribution by rewiring the lipid biosynthesis pathway. Lastly, the latest developed non-homologous end-joining strategy for improving terpenoid production is introduced. This review summarizes the status and metabolic engineering strategies of terpenoids biosynthesis in Y. lipolytica and proposes new insights to move the field forward.

Yarrowia lipolytica: a multitalented yeast species of ecological significance

Yarrowia lipolytica is characterized by GRAS (Generally regarded as safe) status, the versatile substrate utilization profile, rapid utilization rates, metabolic diversity and flexibility, the unique abilities to tolerate to extreme environments (acidic, alkaline, hypersaline, heavy metal-pollutions and others) and elevated biosynthesis and secreting capacities. These advantages of Y. lipolytica allow us to consider it as having great ecological significance. Unfortunately, there is still a paucity of relevant review data. This mini-review highlights ecological ubiquity of Y. lipolytica species, their ability to diversify and colonize specialized niches. Different Y. lipolytica strains, native and engineered, are beneficial in degrading many environmental pollutants causing serious ecological problems worldwide. In agriculture has a potential to be a bio-control agent by stimulating plant defense response, and an eco-friendly bio-fertilizer. Engineered strains of Y. lipolytica have become a very promising platform for eco-friendly production of biofuel, commodities, chemicals and secondary metabolites of plant origin, obtaining which by other method were limited or economically infeasible, or were accompanied by stringent environmental problems. Perspectives to use potential of Y. lipolytica's capacities for industrial scale production of valuable compounds in an eco-friendly manner are proposed.

Hydrolytic secretome engineering in Yarrowia lipolytica for consolidated bioprocessing on polysaccharide resources: review on starch, cellulose, xylan, and inulin

Consolidated bioprocessing (CBP) featuring concomitant hydrolysis of renewable substrates and microbial conversion into value-added biomolecules is considered to bring substantial benefits to the overall process efficiency. The biggest challenge in developing an economically feasible CBP process is identification of bifunctional biocatalyst merging the ability to utilize the substrate and convert it to value-added product with high efficiency. Yarrowia lipolytica is known for its exceptional performance in hydrophobic substrates assimilation and storage. On the other hand, its capacity to grow on plant-derived biomass is strongly limited. Still, its high potential to simultaneously overproduce several secretory proteins makes Y. lipolytica a platform of choice for expanding its substrate range to complex polysaccharides by engineering its hydrolytic secretome. This review provides an overview of different genetic engineering strategies advancing development of Y. lipolytica strains able to grow on the following four complex polysaccharides: starch, cellulose, xylan, and inulin. Much attention has been paid to genome mining studies uncovering native potential of this species to assimilate untypical sugars, as in many cases it turns out that dormant pathways are present in Y. lipolytica's genome. In addition, the magnitude of the economic gain by CBP processing is here discussed and supported with adequate calculations based on simulated process models. KEY POINTS: • The mini-review updates the knowledge on polysaccharide-utilizing Yarrowia lipolytica. • Insight into molecular bases founding new biochemical qualities is provided. • Model industrial processes were simulated and the associated costs were calculated.

Engineering precursor pools for increasing production of odd-chain fatty acids in Yarrowia lipolytica

Microbial production of lipids is one of the promising alternatives to fossil resources with increasing environmental and energy concern. Odd-chain fatty acids (OCFA), a type of unusual lipids, are recently gaining a lot of interest as target compounds in microbial production due to their diverse applications in the medical, pharmaceutical, and chemical industries. In this study, we aimed to enhance the pool of precursors with three-carbon chain (propionyl-CoA) and five-carbon chain (β-ketovaleryl-CoA) for the production of OCFAs in Yarrowia lipolytica. We evaluated different propionate-activating enzymes and the overexpression of propionyl-CoA transferase gene from Ralstonia eutropha increased the accumulation of OCFAs by 3.8 times over control strain, indicating propionate activation is the limiting step of OCFAs synthesis. It was shown that acetate supplement was necessary to restore growth and to produce a higher OCFA contents in total lipids, suggesting the balance of the precursors between acetyl-CoA and propionyl-CoA is crucial for OCFA accumulation. To improve β-ketovaleryl-CoA pools for further increase of OCFA production, we co-expressed the bktB encoding β-ketothiolase in the producing strain, and the OCFA production was increased by 33% compared to control. Combining strain engineering and the optimization of the C/N ratio promoted the OCFA production up to 1.87 ​g/L representing 62% of total lipids, the highest recombinant OCFAs titer reported in yeast, up to date. This study provides a strong basis for the microbial production of OCFAs and its derivatives having high potentials in a wide range of applications.

Yarrowia lipolytica as an Oleaginous Platform for the Production of Value-Added Fatty Acid-Based Bioproducts

The microbial fermentation process has been used as an alternative pathway to the production of value-added natural products. Of the microorganisms, Yarrowia lipolytica, as an oleaginous platform, is able to produce fatty acid-derived biofuels and biochemicals. Nowadays, there are growing progresses on the production of value-added fatty acid-based bioproducts in Y. lipolytica. However, there are fewer reviews performing the metabolic engineering strategies and summarizing the current production of fatty acid-based bioproducts in Y. lipolytica. To this end, we briefly provide the fatty acid metabolism, including fatty acid biosynthesis, transportation, and degradation. Then, we introduce the various metabolic engineering strategies for increasing bioproduct accumulation in Y. lipolytica. Further, the advanced progress in the production of fatty acid-based bioproducts by Y. lipolytica, including nutraceuticals, biofuels, and biochemicals, is summarized. This review will provide attractive thoughts for researchers working in the field of Y. lipolytica.

Advances in biotechnological production of santalenes and santalols

Sandalwood essential oil has been widely used not only as natural medicines but also in perfumery and food industries, with sesquiterpenoids as its major components including (Z)- α-santalol and (Z)-β-santalol and so on. The mature heartwoods of Santalum album, Santalum austrocaledonicum and Santalum spicatum are the major plant resources for extracting sandalwood essential oil, which have been overexploited. Synthetic biology approaches have been successfully applied to produce natural products on large scale. In this review, we summarize biosynthetic enzymes of santalenes and santalols, including various santalene synthases (STSs) and cytochrome P450 monooxygenases (CYPs), and then highlight the advances of biotechnological production of santalenes and santalols in heterologous hosts, especially metabolic engineering strategies for constructing santalene- and santalol-producing Saccharomyces cerevisiae.

Metabolomic Analysis of Response to Nitrogen-Limiting Conditions in Yarrowia spp

Yarrowia is a yeast genus that has been used as a model oleaginous taxon for a wide array of studies. However, information regarding metabolite changes within Yarrowia spp. under different environmental conditions is still limited. Among various factors affecting Yarrowia metabolism, nitrogen-limiting conditions have a profound effect on the metabolic state of yeast. In this study, a time-course LC-MS/MS-based metabolome analysis of Y. lipolytica was performed to determine the optimal cultivation time and carbon-to-nitrogen ratio for studying the effects of nitrogen-limiting conditions on Yarrowia; we found that cultivation time of 36 h and carbon-to-nitrogen ratio of 4:1 and 5:0 was suitable for studying the effects of nitrogen-limiting conditions on Yarrowia and these conditions were applied to six strains of Yarrowia. These six strains of Yarrowia showed similar responses to nitrogen-limiting conditions; however, each strain had a unique metabolomic profile. Purine and pyrimidine metabolism were the most highly affected biological pathways in nitrogen-limiting conditions, indicating that these conditions affect energy availability within cells. This stress leads to a shift in cells to the utilization of a less ATP-dependent biological pathway. This information will be beneficial for the development of Yarrowia strains for further scientific and industrial applications.

Automated engineering of synthetic metabolic pathways for efficient biomanufacturing

Metabolic engineering involves the engineering and optimization of processes from single-cell to fermentation in order to increase production of valuable chemicals for health, food, energy, materials and others. A systems approach to metabolic engineering has gained traction in recent years thanks to advances in strain engineering, leading to an accelerated scaling from rapid prototyping to industrial production. Metabolic engineering is nowadays on track towards a truly manufacturing technology, with reduced times from conception to production enabled by automated protocols for DNA assembly of metabolic pathways in engineered producer strains. In this review, we discuss how the success of the metabolic engineering pipeline often relies on retrobiosynthetic protocols able to identify promising production routes and dynamic regulation strategies through automated biodesign algorithms, which are subsequently assembled as embedded integrated genetic circuits in the host strain. Those approaches are orchestrated by an experimental design strategy that provides optimal scheduling planning of the DNA assembly, rapid prototyping and, ultimately, brings forward an accelerated Design-Build-Test-Learn cycle and the overall optimization of the biomanufacturing process. Achieving such a vision will address the increasingly compelling demand in our society for delivering valuable biomolecules in an affordable, inclusive and sustainable bioeconomy.

Engineering xylose metabolism in yeasts to produce biofuels and chemicals

Xylose is the second most abundant sugar in lignocellulosic biomass. Efficient and rapid xylose utilization is essential for the economic bioconversion of lignocellulosic biomass into value-added products. Building on previous pathway engineering efforts to enable xylose fermentation in Saccharomyces cerevisiae, recent work has focused on reprogramming regulatory networks to enhance xylose utilization by engineered S. cerevisiae. Also, potential benefits of using xylose for the production of various value-added products have been demonstrated. With increasing needs of lipid-derived bioproducts, activation and enhancement of xylose metabolism in oleaginous yeasts have been attempted. This review highlights recent progress of metabolic engineering to achieve efficient and rapid xylose utilization by S. cerevisiae and oleaginous yeasts, such as Yarrowia lipolytica, Rhodosporidium toruloides, and Lipomyces starkeyi.

Metabolic engineering for increased lipid accumulation in Yarrowia lipolytica - A Review

Current energy security and climate change policies encourage the development and utilization of bioenergy. Oleaginous yeasts provide a particularly attractive platform for the sustainable production of biofuels and industrial chemicals due to their ability to accumulate high amounts of lipids. In particular, microbial lipids in the form of triacylglycerides (TAGs) produced from renewable feedstocks have attracted considerable attention because they can be directly used in the production of biodiesel and oleochemicals analogous to petrochemicals. As an oleaginous yeast that is generally regarded as safe, Yarrowia lipolytica has been extensively studied, with large amounts of data on its lipid metabolism, genetic tools, and genome sequencing and annotation. In this review, we highlight the newest strategies for increasing lipid accumulation using metabolic engineering and summarize the research advances on the overaccumulation of lipids in Y. lipolytica. Finally, perspectives for future engineering approaches are proposed.

De novo production of resveratrol from glycerol by engineering different metabolic pathways in Yarrowia lipolytica

Resveratrol is a polyphenol with multiple applications in pharma, cosmetics and food. The aim of this study was to construct Yarrowia lipolytica strains able to produce resveratrol. For this purpose, resveratrol-biosynthesis genes from bacteria and plants were expressed in this host. Since resveratrol can be produced either via tyrosine or phenylaniline, both pathways were tested, first with a single copy and then with two copies. The phenylalanine pathway resulted in slightly higher production in glucose media, although when the media was supplemented with amino acids, the best production was found in the strain with two copies of the tyrosine pathway, which reached 0.085 ​g/L. When glucose was replaced by glycerol, a preferred substrate for bioproduction, the best results, 0.104 ​g/L, were obtained in a strain combining the expression of the two synthesis pathways. Finally, the best producer strain was tested in bioreactor conditions where a production of 0.43 ​g/L was reached. This study suggests that Y. lipolytica is a promising host for resveratrol production from glycerol.

•

Resveratrol can be produced in engineered Y. lipolytica via Tyrosine or Phenylalanine.

•

The integration of multiple copies of the pathway genes further increased production.

•

Engineered Y. lipolytica can produce 430 ​mg/L of resveratrol from glycerol.

Engineering Yarrowia lipolytica as a Chassis for De Novo Synthesis of Five Aromatic-Derived Natural Products and Chemicals

Yarrowia lipolytica is a novel microbial chassis to upgrade renewable low-cost carbon feedstocks to high-value commodity chemicals and natural products. In this work, we systematically characterized and removed the rate-limiting steps of the shikimate pathway and achieved de novo synthesis of five aromatic chemicals in Y. lipolytica. We determined that eliminating amino acids formation and engineering feedback-insensitive DAHP synthases are critical steps to mitigate precursor competition and relieve the feedback regulation of the shikimate pathway. Further overexpression of heterologous phosphoketolase and deletion of pyruvate kinase provided a sustained metabolic driving force that channels E4P (erythrose 4-phosphate) and PEP (phosphoenolpyruvate) precursors through the shikimate pathway. Precursor competing pathways and byproduct formation pathways were also blocked by inactivating chromosomal genes. To demonstrate the utility of our engineered chassis strain, three natural products, 2-phenylethanol (2-PE), p-coumaric acid, and violacein, which were derived from phenylalanine, tyrosine, and tryptophan, respectively, were chosen to test the chassis performance. We obtained 2426.22 ± 48.33 mg/L of 2-PE, 593.53 ± 28.75 mg/L of p-coumaric acid, 12.67 ± 2.23 mg/L of resveratrol, 366.30 ± 28.99 mg/L of violacein, and 55.12 ± 2.81 mg/L of deoxyviolacein from glucose in a shake flask. The 2-PE production represents a 286-fold increase over the initial strain (8.48 ± 0.50 mg/L). Specifically, we obtained the highest 2-PE, violacein, and deoxyviolacein titer ever reported from the de novo shikimate pathway in yeast. These results set up a new stage of engineering Y. lipolytica as a sustainable biorefinery chassis strain for de novo synthesis of aromatic compounds with economic values.

Rhodosporidium toruloides - A potential red yeast chassis for lipids and beyond

The red yeast Rhodosporidium toruloides naturally produces microbial lipids and carotenoids. In the past decade or so, many studies demonstrated R. toruloides as a promising platform for lipid production owing to its diverse substrate appetites, robust stress resistance and other favorable features. Also, significant progresses have been made in genome sequencing, multi-omic analysis and genome-scale modeling, thus illuminating the molecular basis behind its physiology, metabolism and response to environmental stresses. At the same time, genetic parts and tools are continuously being developed to manipulate this distinctive organism. Engineered R. toruloides strains are emerging for enhanced production of conventional lipids, functional lipids as well as other interesting metabolites. This review updates those progresses and highlights future directions for advanced biotechnological applications.

Synthetic biology, systems biology, and metabolic engineering of Yarrowia lipolytica toward a sustainable biorefinery platform

Yarrowia lipolytica is an oleaginous yeast that has been substantially engineered for production of oleochemicals and drop-in transportation fuels. The unique acetyl-CoA/malonyl-CoA supply mode along with the versatile carbon-utilization pathways makes this yeast a superior host to upgrade low-value carbons into high-value secondary metabolites and fatty acid-based chemicals. The expanded synthetic biology toolkits enabled us to explore a large portfolio of specialized metabolism beyond fatty acids and lipid-based chemicals. In this review, we will summarize the recent advances in genetic, omics, and computational tool development that enables us to streamline the genetic or genomic modification for Y. lipolytica. We will also summarize various metabolic engineering strategies to harness the endogenous acetyl-CoA/malonyl-CoA/HMG-CoA pathway for production of complex oleochemicals, polyols, terpenes, polyketides, and commodity chemicals. We envision that Y. lipolytica will be an excellent microbial chassis to expand nature's biosynthetic capacity to produce plant secondary metabolites, industrially relevant oleochemicals, agrochemicals, commodity, and specialty chemicals and empower us to build a sustainable biorefinery platform that contributes to the prosperity of a bio-based economy in the future.

Optimization of Yarrowia lipolytica-based consolidated biocatalyst through synthetic biology approach: transcription units and signal peptides shuffling

Nowadays considerable effort is being pursued towards development of consolidated microbial biocatalysts that will be able to utilize complex, non-pretreated substrates and produce valuable compounds. In such engineered microbes, synthesis of extracellular hydrolases may be fine-tuned by different approaches, like strength of promoter, type of secretory tag, and gene copy number. In this study, we investigated if organization of a multi-element expression cassette impacts the resultant Yarrowia lipolytica transformants' phenotype, presuming that different variants of the cassette are composed of the same regulatory elements and encode the same mature proteins. To this end, Y. lipolytica cells were transformed with expression cassettes bearing a pair of genes encoding exactly the same mature amylases, but fused to four different signal peptides (SP), and located interchangeably in either first or second position of a synthetic DNA construction. The resultant strains were tested for growth on raw and pretreated complex substrates of different plant origin for comprehensive examination of the strains' acquired characteristics. Optimized strain was tested in batch bioreactor cultivations for growth and lipids accumulation. Based on the conducted research, we concluded that the positional order of transcription units (TU) and the type of exploited SP affect final characteristics of the resultant consolidated biocatalyst strains, and thus could be considered as additional factors to be evaluated upon consolidated biocatalysts optimization. KEY POINTS: • Y. lipolytica growing on raw starch was constructed and tested on different substrates. • Impact of expression cassette design and SP on biocatalysts' phenotype was evidenced. • Consolidated biocatalyst process for lipids production from starch was conducted.

Bioproduction of succinic acid from xylose by engineered Yarrowia lipolytica without pH control

BACKGROUND

Xylose is the most prevalent sugar available in hemicellulose fraction of lignocellulosic biomass (LCB) and of great interest for the green economy. Unfortunately, most of the cell factories cannot inherently metabolize xylose as sole carbon source. Yarrowia lipolytica is a non-conventional yeast that produces industrially important metabolites. The yeast is able to metabolize a large variety of substrates including both hydrophilic and hydrophobic carbon sources. However, Y. lipolytica lacks effective metabolic pathway for xylose uptake and only scarce information is available on utilization of xylose. For the economica feasibility of LCB-based biorefineries, effective utilization of both pentose and hexose sugars is obligatory.

RESULTS

In the present study, succinic acid (SA) production from xylose by Y. lipolytica was examined. To this end, Y. lipolytica PSA02004 strain was engineered by overexpressing pentose pathway cassette comprising xylose reductase (XR), xylitol dehydrogenase (XDH) and xylulose kinase (XK) gene. The recombinant strain exhibited a robust growth on xylose as sole carbon source and produced substantial amount of SA. The inhibition of cell growth and SA formation was observed above 60 g/L xylose concentration. The batch cultivation of the recombinant strain in a bioreactor resulted in a maximum biomass concentration of 7.3 g/L and SA titer of 11.2 g/L with the yield of 0.19 g/g. Similar results in terms of cell growth and SA production were obtained with xylose-rich hydrolysate derived from sugarcane bagasse. The fed-batch fermentation yielded biomass concentration of 11.8 g/L (OD600: 56.1) and SA titer of 22.3 g/L with a gradual decrease in pH below 4.0. Acetic acid was obtained as a main by-product in all the fermentations.

CONCLUSION

The recombinant strain displayed potential for bioconversion of xylose to SA. Further, this study provided a new insight on conversion of lignocellulosic biomass into value-added products. To the best of our knowledge, this is the first study on SA production by Y. lipolytica using xylose as a sole carbon source.

Biovalorisation of crude glycerol and xylose into xylitol by oleaginous yeast Yarrowia lipolytica

Background

Xylitol is a commercially important chemical with multiple applications in the food and pharmaceutical industries. According to the US Department of Energy, xylitol is one of the top twelve platform chemicals that can be produced from biomass. The chemical method for xylitol synthesis is however, expensive and energy intensive. In contrast, the biological route using microbial cell factories offers a potential cost-effective alternative process. The bioprocess occurs under ambient conditions and makes use of biocatalysts and biomass which can be sourced from renewable carbon originating from a variety of cheap waste feedstocks.

Result

In this study, biotransformation of xylose to xylitol was investigated using Yarrowia lipolytica, an oleaginous yeast which was firstly grown on a glycerol/glucose for screening of co-substrate, followed by media optimisation in shake flask, scale up in bioreactor and downstream processing of xylitol. A two-step medium optimization was employed using central composite design and artificial neural network coupled with genetic algorithm. The yeast amassed a concentration of 53.2 g/L xylitol using pure glycerol (PG) and xylose with a bioconversion yield of 0.97 g/g. Similar results were obtained when PG was substituted with crude glycerol (CG) from the biodiesel industry (titer: 50.5 g/L; yield: 0.92 g/g). Even when xylose from sugarcane bagasse hydrolysate was used as opposed to pure xylose, a xylitol yield of 0.54 g/g was achieved. Xylitol was successfully crystallized from PG/xylose and CG/xylose fermentation broths with a recovery of 39.5 and 35.3%, respectively.

Conclusion

To the best of the author’s knowledge, this study demonstrates for the first time the potential of using Y. lipolytica as a microbial cell factory for xylitol synthesis from inexpensive feedstocks. The results obtained are competitive with other xylitol producing organisms.

Fermentation process for producing CFAs using Yarrowia lipolytica

Past research has sought to improve the production of cyclopropane fatty acids by the oleaginous yeast Yarrowia lipolytica by heterologously expressing the E. coli fatty acid synthase gene and improving cultivation processes. Cyclopropane fatty acids display properties that hold promise for biofuel applications. The E. coli fatty acid synthase gene was introduced into several genetic backgrounds of the yeast Y. lipolytica to optimize lipid synthesis; the mean cyclopropane fatty acid productivity was 43 mg L-1 h-1 on glucose, and the production rate reached its maximum (3.06 g L-1) after 72 h of cultivation in a bioreactor. The best strain (JMY6851) overexpressed simultaneously the E. coli cyclopropane fatty acid synthase gene under a hybrid promoter (hp8d) and Y. lipolytica LRO1 gene. In fed-batch process using crude glycerol as carbon source, JMY6851 strain displayed high lipid accumulation (78% of dry cell weight) and high biomass production (56 g L-1). After 165 h of cultivation, cyclopropane fatty acids represented 22% of the lipids produced; cyclopropane fatty acid productivity (103.3 mg L-1 h-1) was maximal at 72.5 h of cultivation.

Engineering Yarrowia lipolytica for the Synthesis of Glutathione from Organic By-Products

Tripeptide glutathione, which plays important roles in many cellular mechanisms, is also a biotechnology-oriented molecule with applications in medicine, food and cosmetic. Here, the engineering of the yeast Yarrowia lipolytica for the production of this metabolite at high titer values from various agro-industrial by-products is reported. The constitutive overexpression of the glutathione biosynthetic genes GSH1 and GSH2 encoding respectively γ-glutamylcysteine synthetase and glutathione synthetase, together with the INU1 gene from Kluyveromyces marxianus encoding inulinase yielded a glutathione titer value and a productivity of 644 nmol/mg protein and 510 µmol/g_DCW, respectively. These values were obtained during bioreactor batch cultures in a medium exclusively comprising an extract of Jerusalem artichoke tuber, used as a source of inulin, and ammonium sulfate, used as a nitrogen source.

Acetate Production from Cafeteria Wastes and Corn Stover Using a Thermophilic Anaerobic Consortium: A Prelude Study for the Use of Acetate for the Production of Value-Added Products

Efficient and sustainable biochemical production using low-cost waste assumes considerable industrial and ecological importance. Solid organic wastes (SOWs) are inexpensive, abundantly available resources and their bioconversion to volatile fatty acids, especially acetate, aids in relieving the requirements of pure sugars for microbial biochemical productions in industries. Acetate production from SOW that utilizes the organic carbon of these wastes is used as an efficient solid waste reduction strategy if the environmental factors are optimized. This study screens and optimizes influential factors (physical and chemical) for acetate production by a thermophilic acetogenic consortium using two SOWs-cafeteria wastes and corn stover. The screening experiment revealed significant effects of temperature, bromoethane sulfonate, and shaking on acetate production. Temperature, medium pH, and C:N ratio were further optimized using statistical optimization with response surface methodology. The maximum acetate concentration of 8061 mg L-1 (>200% improvement) was achieved at temperature, pH, and C:N ratio of 60 °C, 6, 25, respectively, and acetate accounted for more than 85% of metabolites. This study also demonstrated the feasibility of using acetate-rich fermentate (obtained from SOWs) as a substrate for the growth of industrially relevant yeast Yarrowia lipolytica, which can convert acetate into higher-value biochemicals.

Sustainable Animal Feed Protein through the Cultivation of YARROWIA Lipolytica on Agro-Industrial Wastes and by-Products

Proteins are essential constituents of animal feeds, which comprise mainly vegetable protein (e.g., soybean meal), which is produced and transported globally. The decoupling of protein-production and livestock-growth areas results in protein deficiencies in certain parts of the world, and in significant environmental stress. Alternative, more sustainable protein feeds are necessary to meet the increasing needs, and to decrease the environmental footprint of animal products. Yeast Single Cell Proteins (SCP), produced locally using various agro-industrial by-product streams, have significant potential as alternative animal feed protein. Particularly, Yarrowia lipolytica, an oleaginous, non-pathogenic microorganism has been characterized as a “workhorse” in biotechnological studies, drawing the attention of many researchers. The present review summarizes available resources on critical issues concerning the applicability and commercialization of Yarrowia lipolytica as an environment-friendly protein source for animal feed. It discusses the sustainability of the yeast SCP production process, it presents the recent advances concerning Yarrowia lipolytica cultivation on low-cost agro-industrial by-products, and it stresses the effects on the health and welfare of productive animals due to the inclusion of Yarrowia lipolytica in their diet. The data presented in this study should facilitate relative research advancement and the commercialization of Yarrowia lipolytica’s use as an alternative protein source/supplement for animal feeds.

Community diversity and habitat structure shape the repertoire of extracellular proteins in bacteria

We test the hypothesis that the frequency and cost of extracellular proteins produced by bacteria, which often depend on cooperative processes, vary with habitat structure and community diversity. The integration of the environmental distribution of bacteria (using 16S datasets) and their genomes shows that bacteria living in more structured habitats encode more extracellular proteins. In contrast, the effect of community diversity depends on protein function: it’s positive for proteins implicated in antagonistic interactions and negative for those involved in nutrient acquisition. Extracellular proteins are costly and endure stronger selective pressure for low cost and for low diffusivity in less structured habitats and in more diverse communities. Finally, Bacteria found in multiple types of habitats, including host-associated generalists, encode more extracellular proteins than niche-restricted bacteria. These results show that ecological variables, notably habitat structure and community diversity, shape the evolution of the repertoires of genes encoding extracellular proteins and thus affect the ability of bacteria to manipulate their environment.

Microbes secrete a repertoire of extracellular proteins to serve various functions depending on the ecological context. Here the authors examine how bacterial community composition and habitat structure affect the extracellular proteins, showing that generalist species and those living in more structured environments produce more extracellular proteins, and that costs of production are lower in more diverse communities.

Engineering Yarrowia lipolytica for Enhanced Production of Arbutin

Arbutin, a glycoside, is derived from the leaves of several plants, including wheat, pear, and bearberry plants, and has a significant role in the treatment of melanoma, cystitis, and cough. Here, we aimed to modify Yarrowia lipolytica to produce arbutin. To construct the arbutin synthetic pathway in Y. lipolytica, three genes (chorismate pyruvate-lyase (UbiC), 4-hydroxybenzoate 1-hydroxylase (MNX1), and hydroquinone glucosyltransferase (AS)) were codon-optimized and heterologously expressed. To maximize arbutin production, seven arbutin-biosynthesis molecular targets were overexpressed, and we found that the individual strengthening of DHS1 and DHS2 led to an 8.9- and 7.8-fold improvement in arbutin yield, respectively. Through optimization, a maximum arbutin titer of 8.6 ± 0.7 g/L was achieved using the finally engineered strain, po1f-At09. Overall, this is the first report of heterologous arbutin synthesis in Y. lipolytica at a high titer. Furthermore, this work opens a possibility for the overproduction of shikimate pathway derivatives in Y. lipolytica.

De novo Biosynthesis of Odd-Chain Fatty Acids in Yarrowia lipolytica Enabled by Modular Pathway Engineering

Microbial oils are regarded as promising alternatives to fossil fuels as concerns over environmental issues and energy production systems continue to mount. Odd-chain fatty acids (FAs) are a type of valuable lipid with various applications: they can serve as biomarkers, intermediates in the production of flavor and fragrance compounds, fuels, and plasticizers. Microorganisms naturally produce FAs, but such FAs are primarily even-chain; only negligible amounts of odd-chain FAs are generated. As a result, studies using microorganisms to produce odd-chain FAs have had limited success. Here, our objective was to biosynthesize odd-chain FAs de novo in Yarrowia lipolytica using inexpensive carbon sources, namely glucose, without any propionate supplementation. To achieve this goal, we constructed a modular metabolic pathway containing seven genes. In the engineered strain expressing this pathway, the percentage of odd-chain FAs out of total FAs was higher than in the control strain (3.86 vs. 0.84%). When this pathway was transferred into an obese strain, which had been engineered to accumulate large amounts of lipids, odd-chain fatty acid production was 7.2 times greater than in the control (0.05 vs. 0.36 g/L). This study shows that metabolic engineering research is making progress toward obtaining efficient cell factories that produce odd-chain FAs.

Debottlenecking mevalonate pathway for antimalarial drug precursor amorphadiene biosynthesis in Yarrowia lipolytica

World Health Organization reports that half of the population in developing countries are at risk of malaria infection. Artemisinin, the most potent anti-malaria drug, is a sesquiterpene endoperoxide extracted from the plant Artemisia annua. Due to scalability and economics issues, plant extraction or chemical synthesis could not provide a sustainable route for large-scale manufacturing of artemisinin. The price of artemisinin has been fluctuating from 200$/Kg to 1100$/Kg, due to geopolitical and climate factors. Microbial fermentation was considered as a promising method to stabilize the artemisinin supply chain. Yarrowia lipolytica, is an oleaginous yeast with proven capacity to produce large quantity of lipids and oleochemicals. In this report, the lipogenic acetyl-CoA pathways and the endogenous mevalonate pathway of Y. lipolytica were harnessed for amorphadiene production. Gene overexpression indicate that HMG-CoA and acetyl-CoA supply are two limiting bottlenecks for amorphadiene production. We have identified the optimal HMG-CoA reductase and determined the optimal gene copy number for the precursor pathways. Amorphadiene production was improved further by either inhibiting fatty acids synthase or activating the fatty acid degradation pathway. With co-expression of mevalonate kinase (encoded by Erg12), a push-and-pull strategy enabled the engineered strain to produce 171.5 ​mg/L of amorphadiene in shake flasks. These results demonstrate that balancing carbon flux and manipulation of precursor competing pathways are key factors to improve amorphadiene biosynthesis in oleaginous yeast; and Y. lipolytica is a promising microbial host to expand nature’s biosynthetic capacity, allowing us to quickly access antimalarial drug precursors.

•

Endogenous acetyl-CoA and mevalonate pathway were harnessed for amorphadiene synthesis.

•

Expression of native untruncated HMG-CoA reductase (HMG1) removes rate-limiting steps.

•

Balancing ADS, HMG1 and MVK activity effectively pull FPP flux toward amorphadiene.

•

Activation of fatty acid degradation pushes carbon flux toward HMG-CoA pathways.

•

A push-and-pull strategy boosts amorphadiene production to 171.5 ​mg/L in shake flasks.

Advances and opportunities in gene editing and gene regulation technology for Yarrowia lipolytica

Yarrowia lipolytica has emerged as a biomanufacturing platform for a variety of industrial applications. It has been demonstrated to be a robust cell factory for the production of renewable chemicals and enzymes for fuel, feed, oleochemical, nutraceutical and pharmaceutical applications. Metabolic engineering of this non-conventional yeast started through conventional molecular genetic engineering tools; however, recent advances in gene/genome editing systems, such as CRISPR-Cas9, transposons, and TALENs, has greatly expanded the applications of synthetic biology, metabolic engineering and functional genomics of Y. lipolytica. In this review we summarize the work to develop these tools and their demonstrated uses in engineering Y. lipolytica, discuss important subtleties and challenges to using these tools, and give our perspective on important gaps in gene/genome editing tools in Y. lipolytica.

Engineering Yarrowia lipolytica for the utilization of acid whey

Acid whey, a byproduct in cheese and yogurt production, demands high costs in disposal at large quantities. Nonetheless, it contains abundant sugars and nutrients that can potentially be utilized by microorganisms. Here we report a novel platform technology that converts acid whey into value-added products using Yarrowia lipolytica. Since wild type strains do not assimilate lactose, a major carbon source in whey, a secreted β-galactosidase was introduced. Additionally, to accelerate galactose metabolism, we overexpressed the relevant native four genes of the Leloir pathway. The engineered strain could achieve rapid total conversion of all carbon sources in acid whey, producing 6.61 g/L of fatty acids (FAs) with a yield of 0.146 g-FAs/g-substrates. Further engineering to introduce an omega-3 desaturase enabled the synthesis of α-linolenic acid from acid whey, producing 10.5 mg/gDCW within a short fermentation time. Finally, PEX10 knockout in our platform strain was shown to minimize hyphal formation in concentrated acid whey cultures, greatly improving fatty acid content. These results demonstrate the feasibility of using acid whey as a previously untapped resource for biotechnology.

Mixed carbon substrates: a necessary nuisance or a missed opportunity?

Although fermentation with single carbon sources is the preferred mode of operation in current industrial biotechnology, the use of multiple substrates has been continuously investigated throughout the years. Generally, microbial metabolism varies significantly when cells are presented with mixed carbon substrates compared to a single carbon-energy source, as different nutrients interact in complex ways within the metabolic network. By exploiting these distinct modes of interaction, researchers have identified unique opportunities to optimize metabolism using mixed carbon sources. Here we review situations where process yield and productivity are markedly improved through the judicious introduction of substrate mixtures. Our goal is to illustrate that with proper design of the choice of substrates and the way they are introduced to cultures, metabolic optimization with mixed substrates can be a unique strategy that complements genetic engineering techniques to enhance cell performance beyond what is accomplished in single substrate fermentations.