Gelatin alternatives for the food industry: recent developments, challenges and prospects

Synthesis and characterization of C2C12-laden gelatin methacryloyl (GelMA) from marine and mammalian sources

Gelatin methacryloyl (GelMA) is widely used for tissue engineering applications as an extracellular matrix (ECM) mimicking scaffold due to its cost-effectiveness, ease of synthesis, and high biocompatibility. GelMA is widely synthesized from porcine skin gelatin, which labors under clinical, religious, and economical restrictions. In order to overcome these limitations, GelMA can be produced from fish skin gelatin, which is eco-friendly as well. Here, we present a comparative study of the physicochemical (structural, thermal, water uptake, swelling, rheological, and mechanical) and biological (cell viability, proliferation, and spreading) properties of porcine and fish skin GelMA with low and high methacrylation degrees, before and after crosslinking, to check whether fish skin can replace porcine skin as the source of GelMA. Porcine and fish skin GelMA presented similar structural, thermal, and water uptake properties prior to crosslinking. However, subsequent to crosslinking, fish skin GelMA hydrogels exhibited a higher mass swelling ratio and a lower elastic and compressive Young's moduli than porcine skin GelMA hydrogels of similar methacrylation level. Both types of GelMA hydrogels showed great biocompatibility toward encapsulated mouse myoblast cells (C2C12), however, improved cell spreading was observed in fish skin GelMA hydrogels, and cell proliferation was only induced in low methacrylated GelMA. These results suggest that fish skin GelMA is a promising substitute for porcine skin GelMA for biomedical applications and that low methacrylated fish skin GelMA can be used as a potential scaffold for skeletal muscle tissue engineering.

Development of a new and sensitive method for the detection of pork adulteration in gelatin and other highly processed food products

Porcine adulteration has become a major concern amongst communities including Muslims and Jews. Reliable detection of the presence of porcine DNA in gelatin and highly processed food samples is essential for Halal and kosher food control. In this study, a forensic approach involving DNA isolation and real-time polymerase chain reaction (PCR) was performed to detect the presence of porcine DNA in commercial gelatin and processed foods containing porcine by-products. The method was compared with commercially sensitive porcine DNA detection kits (Biotecon and R-Biopharm) which are commonly used in food control laboratories for Halal and kosher authentication. The results indicated that a newly developed method called TübiGel was at least 10 times more sensitive for porcine DNA detection. The TübiGel method was found to have a detection limit of 0.01% porcine gelatin, whilst the Biotecon method had 0.1% and R-Biopharm method detected >5% porcine gelatin. The forensic DNA isolation approach of the TübiGel method was found to be a critical step. In addition, real-time PCR of TübiGel method was also found to detect porcine DNA better than real-time PCR of commercial kits.

Cosmetic, Biomedical and Pharmaceutical Applications of Fish Gelatin/Hydrolysates

There are several reviews that separately cover different aspects of fish gelatin including its preparation, characteristics, modifications, and applications. Its packaging application in food industry is extensively covered but other applications are not covered or covered alongside with those of collagen. This review is comprehensive, specific to fish gelatin/hydrolysate and cites recent research. It covers cosmetic applications, intrinsic activities, and biomedical applications in wound dressing and wound healing, gene therapy, tissue engineering, implants, and bone substitutes. It also covers its pharmaceutical applications including manufacturing of capsules, coating of microparticles/oils, coating of tablets, stabilization of emulsions and drug delivery (microspheres, nanospheres, scaffolds, microneedles, and hydrogels). The main outcomes are that fish gelatin is immunologically safe, protects from the possibility of transmission of bovine spongiform encephalopathy and foot and mouth diseases, has an economic and environmental benefits, and may be suitable for those that practice religious-based food restrictions, i.e., people of Muslim, Jewish and Hindu faiths. It has unique rheological properties, making it more suitable for certain applications than mammalian gelatins. It can be easily modified to enhance its mechanical properties. However, extensive research is still needed to characterize gelatin hydrolysates, elucidate the Structure Activity Relationship (SAR), and formulate them into dosage forms. Additionally, expansion into cosmetic applications and drug delivery is needed.

Effects of gellan gum and inulin on mixed-gel properties and molecular structure of gelatin

Gellan gum (GG) is often added to gelatin (GL) to improve the gel property. GG-based or inulin (IL)-based hydrogels were developed. Rigid and brittle gels or smooth and delicate gels were prepared with GG and IL, respectively. This study aimed to explore the properties and interaction mechanisms of the mixed-gel system containing GL, GG, and IL, in which different ratios of GG-IL (0.4%) (10:0, 8:2, 6:4, 5:5, 4:6, 2:8, and 0:10) were added to GL (6%). Texture profiles, rheological properties, water mobility, intermolecular forces, circular dichroism (CD) spectra, and microstructures were analyzed. The results showed that addition of GG-IL could improve the hardness, chewiness, and cohesiveness of mixed-gel, besides maintaining appropriate springiness. Water mobility of the mixed-gel decreased while viscoelasticity increased upon the addition GG. At GG:IL = 2:8, the melting temperature of mixed-gel was far higher than that of GL gel itself. The GL-GG-IL gel showed decrease in nonspecific bonding and increase in hydrogen bonding compared with the GL gel. CD spectra indicated the promotion of GL unfolding by GG, hence suggesting the binding of GG to GL; binding ability was better at GG:IL >5:5. Cryo-SEM provided evidence for the formation of cross-linked network within GL-GG-IL. Overall, we concluded that addition of GG-IL to GL system would be most suitable for improving the properties of mixed-gel. This finding may be potentially applicable in the further development of gel food products, such as meat jellies and gummy jellies.

Rheological Properties of Fish Gelatin Modified with Sodium Alginate

Polyelectrolyte complexes of sodium alginate and gelatin obtained from cold-blooded fish were studied for potential application as structure-forming agents in food hydrogels. The mass ratio of sodium alginate to gelatin plays a decisive role in the sol-gel transition and rheological behavior of the complexes. Differences in the sol-gel transition temperature were observed upon heating and cooling, as is typical for such materials. We investigated the characteristics of this transition by measuring the isothermal changes in the elastic modulus over time at a constant frequency and the transition temperature at a range of frequencies. The kinetic nature of this transition depends on the composition of the complexes. A characteristic alginate-gelatin mass ratio is the ratio at which maximum transition temperature as well as elastic modulus and viscosity (rheological parameters) values are obtained; the characteristic mass ratio for these complexes was found to be 0.06. Calculation of the ionic group ratios in the biopolymers that form complexes and comparison of these data with the turbidimetric titration results clarified the origin of these maxima. Measuring the viscoelastic properties and the creep-elastic recoil of the samples allowed us to characterize these materials as viscoelastic media with a viscosity in the order of 103-104 Pa·s and an elastic modulus in the order of 102-103 Pa. These values drastically decrease at a certain stress threshold, which can be treated as the gel strength limit. Therefore, the observed rheological behavior of gels formed by fish gelatin modified with sodium alginate characterizes them as typical viscoelastic soft matter.

Modified Fish Gelatin as an Alternative to Mammalian Gelatin in Modern Food Technologies

This review considers the main properties of fish gelatin that determine its use in food technologies. A comparative analysis of the amino acid composition of gelatin from cold-water and warm-water fish species, in comparison with gelatin from mammals, which is traditionally used in the food industry, is presented. Fish gelatin is characterized by a reduced content of proline and hydroxyproline which are responsible for the formation of collagen-like triple helices. For this reason, fish gelatin gels are less durable and have lower gelation and melting temperatures than mammalian gelatin. These properties impose significant restrictions on the use of fish gelatin in the technology of gelled food as an alternative to porcine and bovine gelatin. This problem can be solved by modifying the functional characteristics of fish gelatin by adding natural ionic polysaccharides, which, under certain conditions, are capable of forming polyelectrolyte complexes with gelatin, creating additional nodes in the spatial network of the gel.

Advancement of food-derived mixed protein systems: Interactions, aggregations, and functional properties

Recently, interests in binary protein systems have been developed considerably ascribed to the sustainability, environment-friendly, rich in nutrition, low cost, and tunable mechanical properties of these systems. However, the molecular coalition is challenged by the complex mechanisms of interaction, aggregation, gelation, and emulsifying of the mixed system in which another protein is introduced. To overcome these fundamental difficulties and better modulate the structural and functional properties of binary systems, efforts have been steered to gain basic information regarding the underlying dynamics, theories, and physicochemical characteristics of mixed systems. Therefore, the present review provides an overview of the current studies on the behaviors of proteins in such systems and highlights shortcomings and future challenges when applied in scientific fields.

Whey protein isolate-gelatin nanoparticles enable the water-dispersibility and potentialize the antioxidant activity of quinoa oil (Chenopodium quinoa)

The quinoa oil presents benefits to health, but its low water dispersibility in the aqueous matrix and instability of bioactive compounds is challenging for food application. This study performed the physicochemical and chemical characterization of quinoa oil and evaluated its water dispersibility and 2,2'-azinobis-(3-ethylbenzothiazoline-6-sulfonic acid) radical scavenging activity after nanoencapsulation in porcine gelatin and combination with whey protein isolate by emulsification O/W technique. Thus, three formulations were obtained: 1) OG-containing quinoa oil and porcine gelatin in aqueous phase 2; 2) OWG1-containing quinoa oil, whey protein isolate, and porcine gelatin in aqueous phase 2; and 3) OWG2-containing quinoa oil and whey protein isolate in aqueous phase 1, and porcine gelatin in aqueous phase 2. The oil characterization showed that quinoa oil presented the predominance of linoleic acid (53.4%), and concentration of alpha and gamma-tocopherol, respectively, of 8.56 and 6.28 mg.100g-1. All formulations presented a smooth surface without depression or cracking, an average diameter between 165.77 and 529.70 nm. Fourier transform infrared spectroscopy indicated chemical interaction between the encapsulating agents and the oil in all formulations, being more intensified in OWG1 and OWG2. Based on this, these formulations showed higher dispersibility in aqueous solution [68% (3.48) and 71% (2.97)]. This resulted in higher antioxidant activity for OWG1 and OWG2, showing the amounts that reduces antioxidant activity by 50% equal to 5.30 (0.19) mg/mL and 5.54 (0.27) mg/mL, respectively, compared to quinoa oil [13.36 (0.28) mg/mL] (p < 0.05). Thus, quinoa oil nanoencapsulation proved to be an efficient alternative to enable water-dispersibility and enhance antioxidant activity, increasing its potential for application in the food industry.

Gelatin: sources, preparation and application in food and biomedicine

Gelatin is a proteinaceous substance composed of all the essential amino acids (except tryptophan) and derived from collagen using a hydrolysis technique. Hydrogels and modified composites based on gelatin are widely used in the food industry, biomedicine, pharmaceutical industry and food packaging materials due to their biocompatibility, biodegradability, nonimmunogenicity and ability to stimulate cell adhesion and proliferation. Gelatin can absorb 5-10 times its weight of water and is the main ingredient of hard and soft capsules in pharmaceutical industry. It melts above 30°C and easily releases biologically active compounds, nutrients and drugs in human gastrointestinal tract. In addition, gelatin contains arginine-glycine-asparagine RGD-sequences in the polymer structure and contributes to various functions such as antioxidant, anti-hypertensive, anti-microbial, tissue regeneration, wound healing, enhances bone formation and anti-cancer therapy. This article reports a brief overview of gelatin sources, gelatin preparation processes and its physico-chemical properties, as well as advances in the preparation of gelatin-based composite materials and hydrogels for tissue engineering, drug delivery, wound dressings, active packaging using various cross-linking techniques.

Protein Cohabitation: Improving the Photochemical Stability of R-Phycoerythrin in the Solid State

The poor photochemical stability of R-phycoerythrin (R-PE) has been a bottleneck for its broad-spectrum applications. Inspired by nature, we studied a sustainable strategy of protein cohabitation to enhance R-PE stability by embedding it in a solid matrix of gelatin. Both pure R-PE and fresh phycobiliprotein (PBP) extracts recovered from Gracilaria gracilis were studied. The incorporation of R-PE in the gelatin-based films (gelatin-RPE and gelatin-PBPs) has improved its photochemical stability for at least 8 months, the longest time period reported so far. These results were evidenced by not only absorption but also emission quantum yield measurements (Φ). Moreover, the photostability of gelatin-RPE films upon continuous excitation with an AM1.5G solar simulator was tested and found to remain stable for 23 h after initial decreasing up to 250 min. In the end, another approach was established to allow 100% photostability for a 3 h exposure to an AM1.5G solar simulator by doping the gelatin-based film including R-Phycoerythrin with n-propyl gallate stabilized with Tween 80, allowing their use as naturally based optically active centers in photovoltaic applications.

Protein Recovery from Underutilised Marine Bioresources for Product Development with Nutraceutical and Pharmaceutical Bioactivities

The global demand for dietary proteins and protein-derived products are projected to dramatically increase which cannot be met using traditional protein sources. Seafood processing by-products (SPBs) and microalgae are promising resources that can fill the demand gap for proteins and protein derivatives. Globally, 32 million tonnes of SPBs are estimated to be produced annually which represents an inexpensive resource for protein recovery while technical advantages in microalgal biomass production would yield secure protein supplies with minimal competition for arable land and freshwater resources. Moreover, these biomaterials are a rich source of proteins with high nutritional quality while protein hydrolysates and biopeptides derived from these marine proteins possess several useful bioactivities for commercial applications in multiple industries. Efficient utilisation of these marine biomaterials for protein recovery would not only supplement global demand and save natural bioresources but would also successfully address the financial and environmental burdens of biowaste, paving the way for greener production and a circular economy. This comprehensive review analyses the potential of using SPBs and microalgae for protein recovery and production critically assessing the feasibility of current and emerging technologies used for the process development. Nutritional quality, functionalities, and bioactivities of the extracted proteins and derived products together with their potential applications for commercial product development are also systematically summarised and discussed.

Extraction, characterization and molecular structure of bovine skin gelatin extracted with plant enzymes bromelain and zingibain

Bovine skin was incubated with plant enzymes bromelain (B) and zingibain (Z) at the level of 0, 5, 10, 15, 20 and 25 unit/g of skin and gelatin was extracted at 60 °C for 6 h. Control gelatin was extracted without enzymatic pretreatment. The yield and gel strength were 17.90% and 283.35 g for the control samples and 22.26% and 160.88 g for B20 samples. The zingibain extracted gelatin (GEZ) samples failed to form gel. Viscosities of GEZ gelatins were significantly (P < 0.05) lower than the gelatins extracted using bromelain (GEB). β and α chains were absolutely degraded in all GEB and GEZ samples. Only smear bands were observed in GEZ gelatins whereas GEB samples revealed presence of low molecular weight polypeptides. Loss of molecular order was noticed in Z5 as elaborated by Fourier transform infrared (FTIR) spectroscopy. Larger particle size, denser and inter-connected irregular network was observed in B20 under scanning electron microscopy. Based on the results obtained, bromelain, particularly at level 20, could be used to obtain a better quality gelatin with higher yield compared to zingibain.

TaqMan probe based multiplex quantitative PCR assay for determination of bovine, porcine and fish DNA in gelatin admixture, food products and dietary supplements

Detection of animal materials in gelatin-based products is required to address religious and cultural concerns, because porcine and bovine gelatins are prohibited in Halal, Kosher and Hindus consumer goods. In this paper, multiplex quantitative polymerase chain reaction (qPCR) assay using TaqMan probe was developed to discriminate bovine, porcine and fish gelatin species in a single assay platform. The assay was specific to cattle, pigs and fish, having been tested against 14 non-target species. The limit of detection, under gelatin admixed conditions, was 0.005 ng/µL. Finally, a pilot survey was undertaken testing 35 Halal branded processed food and dietary items. Out of 35 samples, only two were found to be positive for porcine species. The authenticity of these two qPCR products was confirmed by DNA sequencing analysis, which showed 99-100% similarity with Sus scrofa (Wild boar) species.

Clarification of apple juices with vegetable proteins monitored by multiple light scattering

This work proposes a novel approach based on the real-time monitoring of the fining process of apple juices by static multiple light scattering. The change in transmission was used to determine the fining effectiveness of three vegetable proteins, respectively, red lentil, green lentil, and green pea proteins. Further treatment with gelatin-bentonite was used as a control. The modified Gompertz function was applied to fit the transmission signals. According to (1) the rate of flocculation and (2) the rate of sedimentation, the best fining efficiency was achieved by red lentil, which was similar to that of gelatin-bentonite and higher than green lentil and green pea proteins. This ranking was obtained at any dose from 60 to 900 mg per liter of juice. The results suggest the use of red lentil as a potential fining agent for apple juices and highlight the advantages of using static multiple light scattering technique as a quality control tool for studying the kinetics of the fining process. PRACTICAL APPLICATION: The study proposed the use of vegetable proteins as fining agents for apple juices. Their efficiency was ably monitored in real time by static multiple light scattering.

Research status in Halal: a review and bibliometric analysis

Purpose

Halal is an emerging business sector and is steadily gaining popularity among scholars and practitioners. The purpose of this paper is to critically evaluate and review the reported literature in the broad area of Halal using bibliometric technique and network analysis tools. Moreover, this paper also proposes future research directions in the field of Halal.

Design/methodology/approach

This paper employed a systematic review technique followed by bibliometric analysis to gain insight and to evaluate the research area associated with Halal. Furthermore, data mining techniques are used for analysing the concerned article title, keywords and abstract of 946 research articles obtained through the Scopus database. Finally, network analysis is used to identify significant research clusters.

Findings

This study reports top authors contributing to this area, the key sub-research areas and the influential works based on citations and PageRank. We identified from the citation analysis that major influential works of Halal are from the subject area of biological science and related areas. Further, this study reports established and emerging research clusters, which provide future research directions.

Research limitations/implications

Scopus database is used to conduct a systematic review and corresponding bibliometric study; the authors might have missed some peer-reviewed studies not reported in Scopus. The selection of keywords for article search may not be accurate for the multi-disciplinary Halal area. Also, the authors have not considered the banking/financial aspects of Halal. The proposed four research clusters may inform potential researcher towards supporting the industry.

Originality/value

The novelty of the study is that no published study has reported the bibliometric study and network analysis techniques in the area of Halal.

A Novel Acetaminophen Soft-Chew Formulation Produced via Hot-Melt Extrusion with In-line Near-Infrared Monitoring as a Process Analytical Technology Tool

Patients who suffer from dysphagia have difficulty in swallowing hard tablets and capsules; hence, gelatin-based soft-chew dosages are used as an alternative and novel drug delivery approach to overcome this problem. However, the conventional method of producing gelatin-based soft-chew dosages has many potential issues. The objective of this study was to use glycerol and the hot-melt extrusion technique to address potential issues and optimize the formulation. Gelatin, acetaminophen, saccharin, xylitol, and sodium chloride and six different ratios of water and glycerol were used in the seven formulations. Extrusion process temperature of formulations 1-6 and formulation 7 were 90°C and 140°C, respectively. Near-infrared spectra were collected during extrusion to monitor quality consistency. Scanning electron microscopic images of the cross-section of the soft-chew dosages were recorded. Differential scanning calorimetry (DSC) was used to characterize the crystal states of each formulation. Texture profile analysis was used to evaluate the physical properties of the tablets. In vitro drug release characteristics were studied. A 45-day stability study was carried out to evaluate the stability of each formulation. Near-infrared spectra showed that formulations 1-6 were uniform while formulation 7 was not. From the DSC results, formulations 1 and 2 showed crystallinity of acetaminophen. Formulation 5 displayed the desired physical and chemical stability in texture profile analysis and in the in vitro drug release studies. By using glycerol and hot-melt extrusion, the potential issues of conventional methods were successfully addressed.

Cross-Linking of Wheat Bran Arabinoxylan by Fungal Laccases Yields Firm Gels

The native extractable arabinoxylans (AX) from wheat bran were cross-linked by the commercial laccase C (LccC) and self-produced laccases from Funalia trogii (LccFtr) and Pleurotus pulmonarius (LccPpu) (0.04 U/µg FA, each). Dynamic oscillation measurements of the 6% AX gels demonstrated a storage modulus of 9.4 kPa for LccC, 9.8 kPa for LccFtr, and 10.0 kPa for LccPpu. A loss factor ≤ 0.6 was recorded in the range from 20 to 80 Hz for all three laccases, and remained constant for four weeks of storage, when LccFtr and LccPpu were used. Arabinoxylan gel characteristics, including high water holding capacity, swelling ratio in saliva, and heat resistance indicated a covalently cross-linked network. Neither the mediator compounds caffeic acid and 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid (ABTS), nor citrus pectin, enhanced the elastic properties of the gels. Using laccases as an oxidant provided gels with a solid and stable texture, comparable in firmness to traditional gelatin gels. Thus, AX gels can be presented in the vegan, halal, and kosher food markets. They may also find use in pharmaceutical and other industrial applications.

Cross-Linking of Fibrex Gel by Fungal Laccase: Gel Rheological and Structural Characteristics

Sugar beet fibre (fibrex) is an abundant side-stream from the sugar refining industry. A self-produced laccase from Funalia trogii (LccFtr) (0.05 U/µg FA) successfully cross-linked fibrex to an edible gel. Dynamic oscillation measurements of the 10% fibrex gels showed a storage modulus of 5.52 kPa and loss factors ≤ 0.36 in the range from 20 to 80 Hz. Comparing storage stability of sweetened 10% fibrex gels with sweetened commercial 6% gelatin gels (10% and 30% d-sucrose) indicated a constant storage modulus and loss factors ≤ 0.7 during four weeks of storage in fibrex gels. Loss factors of sweetened gelatin gels were ≤0.2, and their storage modulus decreased from 9 to 7 kPa after adding d-sucrose and remained steady for four weeks of storage. Fibrex gel characteristics, including high water holding capacity, swelling ratio in saliva, and heat resistance are attributed to a covalently cross-linked network. Vanillin, as a mediator, and citrus pectin did not enhance covalent cross-links and elastic properties of the fibrex gels. Thus, laccase as an oxidative agent provided gels with a solid and stable texture. Fibrex gels may find uses in pharmaceutical and other industrial applications, which require a heat-resistant gel that forms easily at room temperature. They also represent an ethical alternative for manufacturing vegan, halal, and kosher food.

Effects of γ-polyglutamic acid on the gelling properties and non-covalent interactions of fish gelatin

The effects of γ-polyglutamic aid (γ-PGA) on the gelling properties and non-covalent interactions of fish gelatin were investigated. The gel strength and melting temperature of fish gelatin gradually increased, with increasing γ-PGA concentration, although there was no significant change when the γ-PGA concentration was greater than 0.04%. As the concentration of γ-PGA increased, the electrostatic interaction of fish gelatin increased and the hydrophobic interaction between gelatin molecules decreased. The fish gelatin system was comprised of γ-PGA concentrations of 0.04 and 0.06% showing a strong hydrogen bond. When the γ-PGA concentration increased from 0 to 0.04%, more phenolic hydroxyl groups in the tyrosine residue tended to form hydrogen bonds with the protein. However, an additional increase in γ-PGA concentration to 0.1% led to enhanced hydrogen bonding with water molecules. The results of this study showed that hydrogen bonds played an important role in improving the gelling properties of gelatin by γ-PGA.

Preparation and Characterization of β-glucosidase Films for Stabilization and Handling in Dry Configurations

BACKGROUND

Although the stability of proteins is of significance to maintain protein function for therapeutical applications, this remains a challenge. Herein, a general method of preserving protein stability and function was developed using gelatin films.

METHODS

Enzymes immobilized onto films composed of gelatin and Ethylene Glycol (EG) were developed to study their ability to stabilize proteins. As a model functional protein, β-glucosidase was selected. The tensile properties, microstructure, and crystallization behavior of the gelatin films were assessed.

RESULTS

Our results indicated that film configurations can preserve the activity of β-glucosidase under rigorous conditions (75% relative humidity and 37°C for 47 days). In both control films and films containing 1.8 % β-glucosidase, tensile strength increased with increased EG content, whilst the elongation at break increased initially, then decreased over time. The presence of β-glucosidase had a negligible influence on tensile strength and elongation at break. Scanning electron-microscopy (SEM) revealed that with increasing EG content or decreasing enzyme concentrations, a denser microstructure was observed.

CONCLUSION

In conclusion, the dry film is a promising candidate to maintain protein stabilization and handling. The configuration is convenient and cheap, and thus applicable to protein storage and transportation processes in the future.

(Photo-)crosslinkable gelatin derivatives for biofabrication applications

Over the recent decades gelatin has proven to be very suitable as an extracellular matrix mimic for biofabrication and tissue engineering applications. However, gelatin is prone to dissolution at typical cell culture conditions and is therefore often chemically modified to introduce (photo-)crosslinkable functionalities. These modifications allow to tune the material properties of gelatin, making it suitable for a wide range of biofabrication techniques both as a bioink and as a biomaterial ink (component). The present review provides a non-exhaustive overview of the different reported gelatin modification strategies to yield crosslinkable materials that can be used to form hydrogels suitable for biofabrication applications. The different crosslinking chemistries are discussed and classified according to their mechanism including chain-growth and step-growth polymerization. The step-growth polymerization mechanisms are further classified based on the specific chemistry including different (photo-)click chemistries and reversible systems. The benefits and drawbacks of each chemistry are also briefly discussed. Furthermore, focus is placed on different biofabrication strategies using either inkjet, deposition or light-based additive manufacturing techniques, and the applications of the obtained 3D constructs. STATEMENT OF SIGNIFICANCE: Gelatin and more specifically gelatin-methacryloyl has emerged to become one of the gold standard materials as an extracellular matrix mimic in the field of biofabrication. However, also other modification strategies have been elaborated to take advantage of a plethora of crosslinking chemistries. Therefore, a review paper focusing on the different modification strategies and processing of gelatin is presented. Particular attention is paid to the underlying chemistry along with the benefits and drawbacks of each type of crosslinking chemistry. The different strategies were classified based on their basic crosslinking mechanism including chain- or step-growth polymerization. Within the step-growth classification, a further distinction is made between click chemistries as well as other strategies. The influence of these modifications on the physical gelation and processing conditions including mechanical properties is presented. Additionally, substantial attention is put to the applied photoinitiators and the different biofabrication technologies including inkjet, deposition or light-based technologies.

Effect of acid treatment on extraction yield and gel strength of gelatin from whiptail stingray (Dasyatis brevis) skin

Chemical properties of fish gelatins differ from those of conventional mammalian sources, representing an attractive technological alternative for the food industry. Ray filleting generates a considerable amount of skin waste that can be used as a collagen source for gelatin extraction. Thus, this research evaluated the HCl and CH₃COOH effect, at 0.01, 0.025, 0.05, 0.075, 0.1, 0.15, and 0.2 M, on extraction yield, molecular weight distribution, and gel strength (GS) of whiptail stingray (Dasyatis brevis) skin gelatins. Results showed differences (P < 0.05) between acid type and concentration used. CH₃COOH (0.15 M) gave the highest extraction yield (7.0% vs. 5.5% at 0.15 M HCl) and GS (653 ± 71 g vs. 619.5 ± 82 g at 0.2 M HCl). Gelatin electrophoretic profile from CH₃COOH revealed α-/β-components and high molecular weight (> 200 kDa) polymers. Ray gelatin GS was higher than commercial bovine gelatin, suggesting its possible use for technological food applications.

Chicken skin gelatine as an alternative to pork and beef gelatines

Poultry meat-processing industry produces considerably large amounts of by-products (such as chicken skins, heads, feathers, viscera, bones and legs) containing significant volumes of proteins, particularly collagen. One of the possibilities of advantageous utilization of these under-used by-products can be their application as a raw material rich in collagen for preparation of gelatine, a partial hydrolysate of collagen. In the present study, chicken skins obtained as a by-product from the chicken-breast processing were purified from non-collagen proteins, pigments and fats. Collagen was treated with proteolytic enzymes and the gelatine extraction was performed in distilled water at temperatures of 40, 50, 60, 70 and 80 °C during the constant extraction time of 60 min. The influence of the technological conditions on gelatine functional properties including viscosity, clarity, water holding and fat binding capacity, emulsifying and foaming properties was explored. Certain functional properties of prepared gelatines were significantly affected by the extraction temperature, while on some other properties the extraction temperature had no significant effect. Viscosity of prepared chicken skin gelatines was in the range from 3 to 5.7 mPa.s, clarity from 1.5 to 2%, water holding capacity from 3.8 to 5.6 mL.g-1, fat binding capacity from 0.9 to 1.3 mL.g-1, emulsion capacity from 35 to 50%, emulsion stability from 73 to 88%, foaming capacity from 18 to 61% and finally foaming stability was from 4 to 39%. Chicken skin gelatines were compared with commercial food grade pork and beef gelatines. Prepared chicken skin gelatines showed better viscosity, fat binding capacity and foaming stability than mammalian gelatines, while water holding capacity, emulsifying stability and foaming capacity were not as good as in beef and pork gelatines. Emulsifying capacity was comparable with commercial gelatines. Therefore, chicken skin gelatine has the potential as an alternative to traditional gelatines from mammalian sources, such as pork or beef bones and skins.

Chemical and Chemometric Methods for Halal Authentication of Gelatin: An Overview

The issue of food authenticity has become a concern among religious adherents, particularly Muslims, due to the possible presence of nonhalal ingredients in foods as well as other commercial products. One of the nonhalal ingredients that commonly found in food and pharmaceutical products is gelatin which extracted from porcine source. Bovine and fish gelatin are also becoming the main commercial sources of gelatin. However, unclear information and labeling regarding the actual sources of gelatin in food and pharmaceutical products have become the main concern in halal authenticity issue since porcine consumption is prohibited for Muslims. Hence, numerous analytical methods involving chemical and chemometric analysis have been developed to identify the sources of gelatin. Chemical analysis techniques such as biochemical, chromatography, electrophoretic, and spectroscopic are usually combined with chemometric and mathematical methods such as principal component analysis, cluster, discriminant, and Fourier transform analysis for the gelatin classification. A sample result from Fourier transform infrared spectroscopy analysis, which combines Fourier transform and spectroscopic technique, is included in this paper. This paper presents an overview of chemical and chemometric methods involved in identification of different types of gelatin, which is important for halal authentication purposes.

Novel technologies in utilization of byproducts of animal food processing: a review

China is one of the countries with most abundant livestock and poultry resources in the world. The average annual growth rate of output value of livestock and poultry industry reaches 13%, and the output value of livestock and poultry industry accounts for more than 35% of total agricultural output. A large number of byproducts are produced in animal slaughtering and processing operations. If livestock and poultry byproducts are effectively utilized, this will make a huge contribution to GDP. At the same time, aquaculture is China's pillar industry. During fish processing, a large number of byproducts (including fish heads, fish skins, fish bones, fish scales, and viscera) are produced, which weighs approximately 40-55% of the raw fish. The byproducts of freshwater fish are more than 2.5 million tons per annum, most of which are not used. The effective use of byproducts has a direct influence on China's economic and environmental pollution. The nonuse or underutilization of byproducts not only leads to loss of potential revenue, but also results in to an increase in these products and their disposal costs. This paper makes a comprehensive review of the research progress of animal byproduct utilization to date, and aims to provide reference for the utilization and research of animal byproducts.

Soft Gelatin Films Modified with Cellulose Acetate Phthalate Pseudolatex Dispersion-Structure and Permeability

Gastroresistant material, based on gelatin and intended to form capsule shells, was characterized. The films were obtained by mixing a gelatin solution with cellulose acetate phthalate (CAP) pseudolatex at an elevated temperature. Microscopic and spectroscopic analyses of the films—intact or subjected to the acidic treatment—were performed, along with a permeability study of tritium-labeled water. A uniform porous structure formed by CAP within the gelatin gel was observed. The results demonstrated that no interaction of a chemical nature occurred between the components. Additionally, the performed permeability and solubility studies proved that the diffusion of water through the membranes at an acidic pH can be noticeably reduced by adding carrageenan as a secondary gelling/thickening agent.

Recent Advances in Edible Polymer Based Hydrogels as a Sustainable Alternative to Conventional Polymers

The over increasing demand of eco-friendly materials to counter various problems, such as environmental issues, economics, sustainability, biodegradability, and biocompatibility, open up new fields of research highly focusing on nature-based products. Edible polymer based materials mainly consisting of polysaccharides, proteins, and lipids could be a prospective contender to handle such problems. Hydrogels based on edible polymer offer many valuable properties compared to their synthetic counterparts. Edible polymers can contribute to the reduction of environmental contamination, advance recyclability, provide sustainability, and thereby increase its applicability along with providing environmentally benign products. This review is highly emphasizing on toward the development of hydrogels from edible polymer, their classification, properties, chemical modification, and their potential applications. The application of edible polymer hydrogels covers many areas including the food industry, agricultural applications, drug delivery to tissue engineering in the biomedical field and provide more safe and attractive products in the pharmaceutical, agricultural, and environmental fields, etc.

Ambient storage of microencapsulated Lactobacillus plantarum ST-III by complex coacervation of type-A gelatin and gum arabic

Ambient storage of dry powdered probiotics is necessary for manufacturer's cost reduction and customer's convenience. Complex coacervation is a promising microencapsulation technique. In this work, a probiotic matrix of type-A gelatin/gum arabic/sucrose (GE/GA/S) with high coacervation pH was designed, based on the alkaline isoelectric point of type-A gelatin. Bacterial survival during ambient storage at room temperature and certain relative humidity were detected. To clarify the protection factors of the coacervation matrix of GE/GA/S, dry microcapsules of GA, GE, GE/sucrose and GE/GA were prepared as controls and compared in terms of their morphology, moisture content, dynamic vapor absorption and cell viability. Probiotics in GE/GA/S_5.5 microcapsules behaved the best during spray drying, ambient storage and heat treatment. The results proved that sucrose addition was necessary for cell viability against environmental stresses, and that encapsulation by complex coacervation was a positive factor in cell protection, especially at neutral coacervation pH.