Polymer Brushes for Membrane Separations: A Review

Liquid and Droplet Transport in Brush-Coated Cylindrical Nanochannels: Brush-Assisted Droplet Formation

We study, by coarse-grained molecular dynamics simulations, equilibrium and flow properties of a liquid in cylindrical nanochannels, coated with polymer brushes. The parameters of the interaction potential model confer a chemical incompatibility between brush monomers and liquid particles. First, we study cylindrical channels whose radii are larger than the brush height and a continuous column of liquid forms at the center of the channel. These results are contrasted to the limiting case in which the radius of the cylinder is comparable to the brush height. In this second case, the grafted polymers interact across the channel and "close" it. We observe a train of droplets as the stable liquid morphology. The droplet size is comparable to the cylinder radius. By applying a constant body force onto the liquid, we induce a Poiseuille-like flow and investigate the morphology and flow rate as a function of driving force. Upon increasing the driving force, we encounter a nonequilibrium transition from a closed channel with slowly moving droplets to a flowing liquid thread at the center. The switching between these two states is reversible.

Mapping the Interfacial Chemistry and Structure of Partially Fluorinated Bottlebrush Polymers and Their Linear Analogues

Polymer interfaces are key to a range of applications including membranes for chemical separations, hydrophobic coatings, and passivating layers for antifouling. While important, challenges remain in probing the interfacial monolayer where the molecular ordering and orientation can change depending on the chemical makeup or processing conditions. In this work, we leverage surface specific vibrational sum frequency generation (SFG) and the associated dependence on molecular symmetry to elucidate the ordering and orientations of key functional groups for poly(2,2,2-trifluoroethyl methacrylate) bottlebrush polymers and their linear polymer analogues. These measurements were framed by atomistic molecular dynamic simulations to provide a complementary physical picture of the gas-polymer interface. Simulations and SFG measurements show that methacrylate backbones are buried beneath a layer of trifluoroethyl containing side groups that result in structurally similar interfaces regardless of the polymer molecular weight or architecture. The average orientational angles of the trifluoroethyl containing side groups differ depending on polymer linear and bottlebrush architectures, suggesting that the surface groups can reorient via available rotational degrees of freedom. Results show that the surfaces of the bottlebrush and linear polymer samples do not strongly depend on molecular weight or architecture. As such, one cannot rely on increasing the molecular weight or altering the architecture to tune surface properties. This insight into the polymer interfacial structure is expected to advance the design of new material interfaces with tailored chemical/functional properties.

Friends, Foes, and Favorites: Relative Interactions Determine How Polymer Brushes Absorb Vapors of Binary Solvents

Polymer brushes can absorb vapors from the surrounding atmosphere, which is relevant for many applications such as in sensing and separation technologies. In this article, we report on the absorption of binary mixtures of solvent vapors (A and B) with a thermodynamic mean-field model and with grand-canonical molecular dynamics simulations. Both methods show that the vapor with the strongest vapor-polymer interaction is favored and absorbs preferentially. In addition, the absorption of one vapor (A) influences the absorption of another (B). If the A-B interaction is stronger than the interaction between vapor B and the polymers, the presence of vapor A in the brush can aid the absorption of B: the vapors absorb collaboratively as friends. In contrast, if the A-polymer interaction is stronger than the B-polymer interaction and the brush has reached its maximum sorption capacity, the presence of A can reduce the absorption of B: the vapors absorb competitively as foes.

Protein repellent anti-coagulative mixed-charged cellulose derivative coatings

This study describes the formation of cellulose based polyelectrolyte charge complexes on the surface of biodegradable polycaprolactone (PCL) thin films. Anionic sulphated cellulose (CS) and protonated cationic amino cellulose (AC) were used to form these complexes with a layer-by-layer coating technique. Both polyelectrolytes were analyzed by charge titration methods to elucidate their pH-value dependent protonation behavior. A quartz crystal microbalance with dissipation (QCM-D) in combination with X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM) were used to follow the growth, stability and water content of up to three AC/CS bi-layers in aqueous environment. This was combined with coagulation studies on one, two and three bilayers of AC/CS, measuring the thrombin formation rate and the total coagulation time of citrated blood plasma with QCM-D. Stable mixed charged bilayers could be prepared on PCL and significantly higher masses of AC than of CS were present in these complexes. Strong hydration due to the presence of ammonium and sulphate substituents on the backbone of cellulose led to a significant BSA repellent character of three bilayers of AC/CS coatings. The total plasma coagulation time was increased in comparison to neat PCL, indicating an anticoagulative nature of the coatings. Surprisingly, a coating solely composed of an AC layer significantly prolonged the total coagulation time on the surfaces although it did not prevent fibrinogen deposition. It is suggested that these cellulose derivative-based coatings can therefore be used to prevent unwanted BSA deposition and fibrin clot formation on PCL to foster its biomedical application.

Real-Time Measurement of Polymer Brush Dynamics Using Silicon Photonic Microring Resonators: Analyte Partitioning and Interior Brush Kinetics

Polymer brushes are found in biomedical and industrial technologies, where they exhibit functionalities considerably dependent on polymer brush-solvent-analyte interactions. It remains a difficult challenge to quickly analyze solvent-swollen polymer brushes, both at the solvent-polymer brush interface and in the brush interior, as well as to monitor the kinetics of interaction of solvent-swollen brushes with key analytes. Here, we demonstrate the novel use of silicon photonic microring resonators to characterize in situ swollen polymer brush-analyte interactions. By monitoring resonant wavelength shifts, we find that brush-solvent-analyte interaction parameters can be extracted from a single set of data or from successive analyte introductions using a single brush-coated sensor. The partition coefficient of three industrially relevant plasticizers into hydrophobic and hydrophilic brushes was determined and found to be in agreement with known solubility trends. We found that the diffusion coefficient of the plasticizer into the brush decreases as brush thickness increases, supporting a model of a dense inner brush layer and diffuse outer layer. pK_a's of pH-sensitive brushes were determined on the microring resonator platform; upon increasing the dry brush thickness, the pK_a for poly(2-dimethylamino ethyl methacrylate) decreased from 8.5 to approach the bulk material pK_a of 7.3 and showed dependence on the presence and concentration of salt. These proof-of-concept experiments show how the surface-sensitive nature of the microring resonator detection platform provides valuable information about the interaction of the polymer brushes with the solvents and analytes, not easily accessed by other techniques.

Degrafting of Polymer Brushes by Exposure to Humid Air

It is well-known that polymer brushes can degraft in aqueous liquids. Here we show that brushes can deteriorate in humid air too. We observe that the detachment rate of the brushes increases with increasing relative humidity and hydrophilicity of the brushes. We relate this to the increase in water absorption as these parameters are increased. Our results imply that protective measures that are at present being developed for applications of brushes in liquids will also be key in enabling the long-term storage and utilization of hydrophilic brushes in air.

Mixed Polymer Brushes for "Smart" Surfaces

Mixed polymer brushes (MPBs) are composed of two or more disparate polymers covalently tethered to a substrate. The resulting phase segregated morphologies have been extensively studied as responsive "smart" materials, as they can be reversible tuned and switched by external stimuli. Both computational and experimental work has attempted to establish an understanding of the resulting nanostructures that vary as a function of many factors. This contribution highlights state-of-the-art MPBs studies, covering synthetic approaches, phase behavior, responsiveness to external stimuli as well as novel applications of MPBs. Current limitations are recognized and possible directions for future studies are identified.

Multistimuli Responsive Reversible Cross-Linking-Decross-Linking of Concentrated Polymer Brushes

Poly(furfuryl methacrylate) (PFMA) brushes were cross-linked using bismaleimide cross-linkers via the Diels-Alder (DA) reaction at 70 °C, generating cross-linked PFMA brushes (PFMA brush gels). The cross-linked PFMA brushes were decross-linked at 110 °C via the retro-Diels-Alder (rDA) reaction, offering the temperature-responsive reversible PFMA brush gels. The wettability of the brush was tunable by cross-linking and decross-linking. The use of a disulfide containing bismaleimide as a cross-linker gave the S-S bond at the cross-linking point. The S-S bond was cleaved upon thermal or photo stimulus and regenerated through oxidative stimulus, offering another reversible decross-linking/cross-linking pathway of the PFMA brush gel. The use of photo stimulus together with photomasks further offered patterned brushes with the cross-linked and decross-linked domains. The combination of the DA/rDA reactions and the reversible S-S bond cleavage provided multistimuli-responsive brush gels for switching the surface properties in unique manners. The reversible cross-linking, multiresponsiveness, access to patterned structures, and metal-free synthetic procedure are attractive features in the present approach for creating smart functional surfaces.

The Competition of Termination and Shielding to Evaluate the Success of Surface-Initiated Reversible Deactivation Radical Polymerization

One of the challenges for brush synthesis for advanced bioinspired applications using surface-initiated reversible deactivation radical polymerization (SI-RDRP) is the understanding of the relevance of confinement on the reaction probabilities and specifically the role of termination reactions. The present work puts forward a new matrix-based kinetic Monte Carlo platform with an implicit reaction scheme capable of evaluating the growth pattern of individual free and tethered chains in three-dimensional format during SI-RDRP. For illustration purposes, emphasis is on normal SI-atom transfer radical polymerization, introducing concepts such as the apparent livingness and the molecular height distribution (MHD). The former is determined based on the combination of the disturbing impact of termination (related to conventional livingness) and shielding of deactivated species (additional correction due to hindrance), and the latter allows structure-property relationships to be identified, starting at the molecular level in view of future brush characterization. It is shown that under well-defined SI-RDRP conditions the contribution of (shorter) hindered dormant chains is relevant and more pronounced for higher average initiator coverages, despite the fraction of dead chains being less. A dominance of surface-solution termination is also put forward, considering two extreme diffusion modes, i.e., translational and segmental. With the translational mode termination is largely suppressed and the living limit is mimicked, whereas with the segmental mode termination occurs more and the termination front moves upward alongside the polymer layer growth. In any case, bimodalities are established for the tethered chains both on the level of the chain length distribution and the MHD.

Effective Synthesis of Patterned Polymer Brushes with Tailored Multiple Graft Densities

This paper reports an effective method to prepare patterned polymer brushes on surfaces with tailored graft densities. High-density (concentrated), moderate-density (semidiluted), and low-density (diluted) polymer brushes were fabricated in patterned manners, offering defined three-dimensional patterned structures. This method uses a middle/near-UV (≥250 nm) lamp and needs only a short time (≤10 min) to fabricate prepatterns of the initiator, in sharp contrast to the previous high-energy lithography and time-consuming processes. The obtained patterned brush served as a molecular (protein) repellent/adsorptive interface based on a graft-density-dependent size-exclusion effect. This method is facile and accessible to wide ranges of tunable density and pattern shapes, which are attractive for extensive use.

Manipulation of Grafting Location via Photografting To Fabricate High-Performance Ethylene Vinyl Alcohol Copolymer Membrane for Protein Separation

Ethylene vinyl alcohol copolymer (EVAL) membrane has great potential for applications in protein separation and purification, but the uncontrollable distribution of grafting location when membranes are modified by the grafting method limits the membrane performance. Herein, an effective strategy for controlling the distribution of grafting location was designed to fabricate a high-performance EVAL membrane via photografting. The UV intensity through the membranes was weakened when the local concentration of the photoinitiator benzophenone (BP) on the topside of the membrane increased; thus, the grafting location inside the EVAL membrane changed from homogenous to asymmetric distribution based on the UV absorbability of BP. The grafting inside the membrane pores can be promoted when the loose and porous surface of the EVAL membrane was used as the UV-facing side. More importantly, the varied distribution of grafting location played different roles on improving the membrane performance. For protein binding, the limited convection in the membrane bed was avoided, and the desorption efficiency could be improved when the grafting location enriched inside the membrane pores. For protein filtration, the antifouling properties of the EVAL membrane were enhanced when the grafting location enriched on the topside. This research offers a novel approach to achieve controllable grafting location distribution of membranes and provides a perspective to design the high-performance EVAL membranes for protein separation.

Continuous assembly of supramolecular polyamine-phosphate networks on surfaces: preparation and permeability properties of nanofilms

Supramolecular self-assembly of molecular building blocks represents a powerful "nanoarchitectonic" tool to create new functional materials with molecular-level feature control. Here, we propose a simple method to create tunable phosphate/polyamine-based films on surfaces by successive assembly of poly(allylamine hydrochloride) (PAH)/phosphate anions (Pi) supramolecular networks. The growth of the films showed a great linearity and regularity with the number of steps. The coating thickness can be easily modulated by the bulk concentration of PAH and the deposition cycles. The PAH/Pi networks showed chemical stability between pH 4 and 10. The transport properties of the surface assemblies formed from different deposition cycles were evaluated electrochemically by using different redox probes in aqueous solution. The results revealed that either highly permeable films or efficient anion transport selectivity can be created by simply varying the concentration of PAH. This experimental evidence indicates that this new strategy of supramolecular self-assembly can be useful for the rational construction of single polyelectrolyte nanoarchitectures with multiple functionalities.

Membrane Filtration with Liquids: A Global Approach with Prior Successes, New Developments and Unresolved Challenges

After 70 years, modern pressure-driven polymer membrane processes with liquids are mature and accepted in many industries due to their good performance, ease of scale-up, low energy consumption, modular compact construction, and low operating costs compared with thermal systems. Successful isothermal operation of synthetic membranes with liquids requires consideration of three critical aspects or "legs" in order of relevance: selectivity, capacity (i.e. permeation flow rate per unit area) and transport of mass and momentum comprising concentration polarization (CP) and fouling (F). Major challenges remain with respect to increasing selectivity and controlling mass transport in, to and away from membranes. Thus, prediction and control of membrane morphology and a deep understanding of the mechanism of dissolved and suspended solute transport near and in the membrane (i.e. diffusional and convective mass transport) is essential. Here, we focus on materials development to address the relatively poor selectivity of liquid membrane filtration with polymers and discuss the critical aspects of transport limitations. Machine learning could help optimize membrane structure design and transport conditions for improved membrane filtration performance.

Elucidation of Titanium Dioxide Nucleation and Growth on a Polydopamine-Modified Nanoporous Polyvinylidene Fluoride Substrate via Low-Temperature Atomic Layer Deposition

Interfaces combining polydopamine (PDA) and nanoparticles have been widely utilized for fabricating hybrid colloidal particles, thin films, and membranes for applications spanning biosensing, drug delivery, heavy metal detection, antifouling membranes, and lithium ion batteries. However, fundamental understanding of the interaction between PDA and nanoparticles is still limited, especially the impact of PDA on nanoparticle nucleation and growth. In this work, PDA is used to generate functional bonding sites for depositing titanium dioxide (TiO₂) via atomic layer deposition (ALD) onto a nanoporous polymer substrate for a range of ALD cycles (<100). The resulting hybrid membranes are systematically characterized using water contact angle, scanning electron microscopy, atomic force microscopy, nitrogen adsorption and desorption, and X-ray photoelectron spectroscopy (XPS). An intriguing nonlinear relationship was observed between the number of ALD cycles and changes in surface properties (water contact angle and surface roughness). Together with XPS study, those changes in surface properties were exploited to probe the nanoparticle nucleation and growth process on complex PDA-coated porous polymer substrates. Molecular level understanding of inorganic and polymer material interfaces will shed light on fine-tuning nanoparticle-modified polymeric membrane materials.

Simultaneous polymer chain growth with the coexistence of bulk and surface initiators: insight from computer simulations

By Brownian dynamics simulations we study the simultaneous polymer chain growth process with the coexistence of bulk and surface initiators. We find that when the surface initiator density is low enough, the practical experimental way to estimate the dispersity (Đ) of surface-initiated chains on the basis of the dispersity of bulk-initiated chains remains valid as long as the conformations of grafted chains remain within the mushroom regime (i.e., the grafted chains are sparsely distributed). On the other hand, although the average chain lengths of surface and bulk polymers could be equivalent when certain conditions are met, their mass distributions are still different. We also find that increasing the fraction of surface initiators leads to an enlarged disparity in Đ and average length between surface and bulk chains, which is inconsistent with previous studies. This study helps in better understanding the cooperative competition and suppressing effect of bulk chains on surface grown chains, as well as the cause of the dispersity of the surface grown chains as compared to their bulk counterparts with the coexistence of bulk and surface initiators.

Reactive, Self-Cleaning Ultrafiltration Membrane Functionalized with Iron Oxychloride Nanocatalysts

Self-cleaning, antifouling ultrafiltration membranes are critically needed to mitigate organic fouling in water and wastewater treatment. In this study, we fabricated a novel polyvinylidene fluoride (PVDF) composite ultrafiltration membrane coated with FeOCl nanocatalysts (FeOCl/PVDF) via a facile, scalable thermal-treatment method, for the synergetic separation and degradation of organic pollutants. The structure, composition, and morphology of the FeOCl/PVDF membrane were extensively characterized. Results showed that the as-prepared FeOCl/PVDF membrane was uniformly covered with FeOCl nanoparticles with an average diameter of 1-5 nm, which greatly enhanced membrane hydrophilicity. The catalytic self-cleaning and antifouling properties of the FeOCl/PVDF membrane were evaluated in the presence of H₂O₂ at neutral pH. Using a facile H₂O₂ cleaning process, we showed that the FeOCl/PVDF membrane can achieve an excellent water flux recovery rate of ∼100%, following organic fouling with a model organic foulant (bovine serum albumin). Moreover, the in situ catalytic production of active hydroxyl radicals by the FeOCl/PVDF membrane was elucidated by electron spin resonance (ESR) and UV analysis. The catalytic performance of the FeOCl/PVDF membrane was further demonstrated by the complete degradation of bisphenol A when H₂O₂ was dosed in the feed solution at neutral pH. Our results demonstrate the promise of utilizing this novel membrane for the treatment of waters with complex organic pollutants.

Cononsolvency Transition of Polymer Brushes: A Combined Experimental and Theoretical Study

In this study, the cononsolvency transition of poly(N-isopropylacrylamide) (PNiPAAm) brushes in aqueous ethanol mixtures was studied by using Vis-spectroscopic ellipsometry (SE) discussed in conjunction with the adsorption-attraction model. We proved that the cononsolvency transition of PNiPAAm brushes showed features of a volume phase transition, such as a sharp collapse, reaching a maximum decrease in thickness for a very narrow ethanol volume composition range of 15% to 17%. These observations are in agreement with the recently published preferential adsorption model of the cononsolvency effect.

En Route to Practicality of the Polymer Grafting Technology: One-Step Interfacial Modification with Amphiphilic Molecular Brushes

Surface modification with polymer grafting is a versatile tool for tuning the surface properties of a wide variety of materials. From a practical point of view, such a process should be readily scalable and transferable between different substrates and consist of as least number of steps as possible. To this end, a cross-linkable amphiphilic copolymer system that is able to bind covalently to surfaces and form permanently attached networks via a one-step procedure is reported here. This system consists of brushlike copolymers (molecular brushes) made of glycidyl methacrylate, poly(oligo(ethylene glycol) methyl ether methacrylate), and lauryl methacrylate, which provide the final product with tunable reactivity and balance between hydrophilicity and hydrophobicity. The detailed study of the copolymer synthesis and properties has been carried out to establish the most efficient pathway to design and tailor this amphiphilic molecular brush system for specific applications. As an example of the applications, we showed the ability to control the deposition of graphene oxide (GO) sheets on both hydrophilic and hydrophobic surfaces using GO modified with the molecular brushes. Also, the capability to tune the osteoblast cell adhesion with the copolymer-based coatings was demonstrated.

Regimes of Flow over Complex Structures of Endothelial Glycocalyx: A Molecular Dynamics Simulation Study

Flow patterns on surfaces grafted with complex structures play a pivotal role in many engineering and biomedical applications. In this research, large-scale molecular dynamics (MD) simulations are conducted to study the flow over complex surface structures of an endothelial glycocalyx layer. A detailed structure of glycocalyx has been adopted and the flow/glycocalyx system comprises about 5,800,000 atoms. Four cases involving varying external forces and modified glycocalyx configurations are constructed to reveal intricate fluid behaviour. Flow profiles including temporal evolutions and spatial distributions of velocity are illustrated. Moreover, streamline length and vorticity distributions under the four scenarios are compared and discussed to elucidate the effects of external forces and glycocalyx configurations on flow patterns. Results show that sugar chain configurations affect streamline length distributions but their impact on vorticity distributions is statistically insignificant, whilst the influence of the external forces on both streamline length and vorticity distributions are trivial. Finally, a regime diagram for flow over complex surface structures is proposed to categorise flow patterns.

Monitoring Collapse of Uniform Cylindrical Brushes with a Thermoresponsive Corona in Water

We generated rod-like micelles of uniform length by living crystallization-driven self-assembly of a polyferrocenylsilane (PFS) block copolymer PFS₂₆-b-POEGMA₁₆₃ in a methanol-ethanol mixture and then transferred these micelles to water. The corona chains consisted of poly(oligoethylene glycol methacrylate) that had a lower critical solution temperature (LCST) of 40.5 °C in water. We used a combination of static (SLS) and dynamic (DLS) multiangle light scattering to determine the dimensions of these cylindrical brush micelles in solution. Measurements carried out in dilute solution in water over a series of temperatures from 23 to 50 °C showed that the collapse transition was broad and continuous, upon both heating and cooling. This response is different from the collapse transition of POEGMA₁₆₃ homopolymer in water, which occurs over a very narrow temperature range. Thus, we show that the collapse transition of a cylindrical brush has important features in common with the collapse of a brush of thermoresponsive polymers on a planar surface.

Recent Advances in the Fabrication of Membranes Containing "Ion Pairs" for Nanofiltration Processes

In the face of serious environmental pollution and water scarcity problems, the membrane separation technique, especially high efficiency, low energy consumption, and environmental friendly nanofiltration, has been quickly developed. Separation membranes with high permeability, good selectivity, and strong antifouling properties are critical for water treatment and green chemical processing. In recent years, researchers have paid more and more attention to the development of high performance nanofiltration membranes containing “ion pairs”. In this review, the effects of “ion pairs” characteristics, such as the super-hydrophilicity, controllable charge character, and antifouling property, on nanofiltration performances are discussed. A systematic survey was carried out on the various approaches and multiple regulation factors in the fabrication of polyelectrolyte complex membranes, zwitterionic membranes, and charged mosaic membranes, respectively. The mass transport behavior and antifouling mechanism of the membranes with “ion pairs” are also discussed. Finally, we present a brief perspective on the future development of advanced nanofiltration membranes with “ion pairs”.