Identification and characterization of genes from Streptomyces sp. strain K30 responsible for clear zone formation on natural rubber latex and poly(cis-1,4-isoprene) rubber degradation

Insights into the microbial degradation of rubber and gutta-percha by analysis of the complete genome of Nocardia nova SH22a

The complete genome sequence of Nocardia nova SH22a was determined in light of the remarkable ability of rubber and gutta-percha (GP) degradation of this strain. The genome consists of a circular chromosome of 8,348,532 bp with a G+C content of 67.77% and 7,583 predicted protein-encoding genes. Functions were assigned to 72.45% of the coding sequences. Among them, a large number of genes probably involved in the metabolism of xenobiotics and hardly degradable compounds, as well as genes that participate in the synthesis of polyketide- and/or nonribosomal peptide-type secondary metabolites, were detected. Based on in silico analyses and experimental studies, such as transposon mutagenesis and directed gene deletion studies, the pathways of rubber and GP degradation were proposed and the relationship between both pathways was unraveled. The genes involved include, inter alia, genes participating in cell envelope synthesis (long-chain-fatty-acid-AMP ligase and arabinofuranosyltransferase), β-oxidation (α-methylacyl-coenzyme A [α-methylacyl-CoA] racemase), propionate catabolism (acyl-CoA carboxylase), gluconeogenesis (phosphoenolpyruvate carboxykinase), and transmembrane substrate uptake (Mce [mammalian cell entry] transporter). This study not only improves our insights into the mechanism of microbial degradation of rubber and GP but also expands our knowledge of the genus Nocardia regarding metabolic diversity.

Latex clearing protein-an oxygenase cleaving poly(cis-1,4-isoprene) rubber at the cis double bonds

Gordonia polyisoprenivorans strain VH2, a potent rubber-degrading actinomycete, harbors two latex clearing proteins (Lcps), which are known to be essential for the microbial degradation of rubber. However, biochemical information on the exact role of this protein in the degradation of polyisoprene was lacking. In this study, the gene encoding Lcp1VH2 was heterologously expressed in strains of Escherichia coli, the corresponding protein was purified, and its role in rubber degradation was examined by measurement of oxygen consumption as well as by chromatographic and spectroscopic methods. It turned out that active Lcp1VH2 is a monomer and is responsible for the oxidative cleavage of poly(cis-1,4-isoprene) in synthetic as well as in natural rubber by the addition of oxygen (O2) to the cis double bonds. The resulting oligomers possess repetitive isoprene units with aldehyde (CHO-CH2-) and ketone (-CH2-CO-CH3) functional groups at the termini. Two fractions with average isoprene contents of 18 and 10, respectively, were isolated, thus indicating an endocleavage mechanism. The activity of Lcp1VH2 was determined by applying a polarographic assay. Alkenes, acyclic terpenes, or other rubber-like polymers, such as poly(cis-1,4-butadiene) or poly(trans-1,4-isoprene), are not oxidatively cleaved by Lcp1VH2. The pH and temperature optima of the enzyme are at pH 7 and 30°C, respectively. Furthermore, it was demonstrated that active Lcp1VH2 is a Cu(II)-containing oxygenase that exhibits a conserved domain of unknown function which cannot be detected in any other hitherto-characterized enzyme. The results presented here indicate that this domain might represent a new protein family of oxygenases.

Rubber oxygenase and latex clearing protein cleave rubber to different products and use different cleavage mechanisms

Two types of enzyme for oxidative cleavage of poly(cis-1,4-isoprene) are known. One is rubber oxygenase (RoxA) that is secreted by Xanthomonas sp. strain 35Y and a few other Gram-negative rubber-degrading bacteria during growth on polyisoprene. RoxA was studied in the past, and the recently solved structure showed a structural relationship to bacterial cytochrome c peroxidases (J. Seidel et al., Proc. Natl. Acad. Sci. U. S. A. 110:13833-13838, 2013, http://dx.doi.org/10.1073/pnas.1305560110). The other enzyme is latex-clearing protein (Lcp) that is secreted by rubber-degrading actinomycetes, but Lcp has not yet been purified. Here, we expressed Lcp of Streptomyces sp. strain K30 in a ΔroxA background of Xanthomonas sp. strain 35Y and purified native (untagged) Lcp. The specific activities of Lcp and RoxA were 0.70 and 0.48 U/mg, respectively. Lcp differed from RoxA in the absence of heme groups and other characteristics. Notably, Lcp degraded polyisoprene via endo-type cleavage to tetra-C20 and higher oligo-isoprenoids with aldehyde and keto end groups, whereas RoxA used an exo-type cleavage mechanism to give the main end product 12-oxo-4,8-dimethyltrideca-4,8-diene-1-al (ODTD). RoxA was able to cleave isolated Lcp-derived oligo-isoprenoid molecules to ODTD. Inhibitor studies, spectroscopic investigations and metal analysis gave no indication for the presence of iron, other metals, or cofactors in Lcp. Our results suggest that Lcp could be a member of the growing group of cofactor-independent oxygenases and differs in the cleavage mechanism from heme-dependent RoxA. In conclusion, RoxA and Lcp represent two different answers to the same biochemical problem, the cleavage of polyisoprene, a polymer that has carbon-carbon double bonds as the only functional groups for enzymatic attack.

Functional identification of rubber oxygenase (RoxA) in soil and marine myxobacteria

The rubber oxygenase (RoxA) of Xanthomonas sp. strain 35Y (RoxA(Xsp)) is so far the only known extracellular c-type diheme cytochrome that is able to cleave poly(cis-1,4-isoprene). All other rubber-degrading bacteria described are Gram positive and employ a nonheme protein (latex-clearing protein [Lcp]) for the postulated primary attack of polyisoprene. Here, we identified RoxA orthologs in the genomes of Haliangium ochraceum, Myxococcus fulvus, Corallococcus coralloides, and Chondromyces apiculatus. The roxA orthologs of H. ochraceum (RoxA(Hoc)), C. coralloides BO35 (RoxA(Cco)), and M. fulvus (RoxA(Mfu)) were functionally expressed in a ΔroxA Xanthomonas sp. 35Y background. All RoxA orthologs oxidatively cleaved polyisoprene, as revealed by restoration of clearing-zone formation and detection of 12-oxo-4,8-dimethyltrideca-4,8-diene-1-al (ODTD) as a cleavage product. RoxA(Xsp), RoxA(Mfu), and RoxA(Cco) were purified and biochemically characterized. The optimal temperature of RoxA(Cco) and RoxA(Mfu) was between 22 and 30°C. All RoxA orthologs as isolated showed an oxidized UV-visible spectrum. Chemical reduction of RoxA(Cco) and RoxA(Mfu) indicated the presence of two slightly different heme centers with absorption maxima between 549 and 553 nm, similar to RoxA(Xsp). Sequence analysis and modeling of the three-dimensional structures of the RoxA orthologs revealed a high degree of similarity to the recently solved RoxA(Xsp) structure and included several conserved residues, notably, W302, F317, and a MauG motif at about H517. Lcp-like sequences were not detected in the genomes of the Xanthomonas sp. 35Y, H. ochraceum, M. fulvus, and C. coralloides. No RoxA orthologs were found in Gram-positive bacteria, and this first description of functional RoxA in Gram-negative bacteria other than Xanthomonas proves that RoxA is more common among rubber degraders than was previously assumed.

Structure of the processive rubber oxygenase RoxA from Xanthomonas sp

Rubber oxygenase A (RoxA) is one of only two known enzymes able to catalyze the oxidative cleavage of latex for biodegradation. RoxA acts as a processive dioxygenase to yield the predominant product 12-oxo-4,8-dimethyl-trideca-4,8-diene-1-al (ODTD), a tri-isoprene unit. Here we present a structural analysis of RoxA from Xanthomonas sp. strain 35Y at a resolution of 1.8 Å. The enzyme is a 75-kDa diheme c-type cytochrome with an unusually low degree of secondary structure. Analysis of the heme group arrangement and peptide chain topology of RoxA confirmed a distant kinship with diheme peroxidases of the CcpA family, but the proteins are functionally distinct, and the extracellular RoxA has evolved to have twice the molecular mass by successively accumulating extensions of peripheral loops. RoxA incorporates both oxygen atoms of its cosubstrate dioxygen into the rubber cleavage product ODTD, and we show that RoxA is isolated with O2 stably bound to the active site heme iron. Activation and cleavage of O2 require binding of polyisoprene, and thus the substrate needs to use hydrophobic access channels to reach the deeply buried active site of RoxA. The location and nature of these channels support a processive mechanism of latex cleavage.

Microbial gutta-percha degradation shares common steps with rubber degradation by Nocardia nova SH22a

Nocardia nova SH22a, a bacterium capable of degrading gutta-percha (GP) and natural rubber (NR), was used to investigate the GP degradation mechanism and the relations between the GP and NR degradation pathways. For this strain, a protocol of electroporation was systematically optimized, and an efficiency of up to 4.3 × 10(7) CFU per μg of plasmid DNA was achieved. By applying this optimized protocol to N. nova SH22a, a Tn5096-based transposon mutagenesis library of this bacterium was constructed. Among about 12,000 apramycin-resistant transformants, we identified 76 stable mutants defective in GP or NR utilization. Whereas 10 mutants were specifically defective in GP utilization, the growth of the other 66 mutants was affected on both GP and NR. This indicated that the two degradation pathways are quite similar and share many common steps. The larger number of GP-degrading defective mutants could be explained in one of two ways: either (i) the GP pathway is more complex and harbors more specific steps or (ii) the steps for both pathways are almost identical, but in the case of GP degradation there are fewer enzymes involved in each step. The analysis of transposition loci and genetic studies on interesting genes confirmed the crucial role of an α-methylacyl-coenzyme A racemase in the degradation of both GP and NR. We also demonstrated the probable involvement of enzymes participating in oxidoreduction reactions, β-oxidation, and the synthesis of complex cell envelope lipids in the degradation of GP.

Importance of the latex-clearing protein (Lcp) for poly(cis-1,4-isoprene) rubber cleavage in Streptomyces sp. K30

Streptomyces sp. strain K30 induces the formation of an extracellular Lcp (latex-clearing protein) during poly(cis-1,4-isoprene) degradation. To investigate the function of this enzyme in Streptomyces sp. strain K30, the lcp gene was disrupted. This was the first time that the screening for a knock out lcp mutant of Streptomyces sp. strain K30 was successful. The resulting mutant Streptomyces sp. K30_lcpΩKm exhibited reduced growth in liquid mineral salts media containing poly(cis-1,4-isoprene) as the sole carbon and energy source. Additionally, there was no detectable Lcp activity on latex overlay agar plates. When Lcp from Streptomyces sp. strain K30 was heterologously expressed in strains TK23 and TK24 of Streptomyces lividans and a strain of S. erythraea with plasmid pIJ6021::lcp, the recombinant strains acquired the ability to cleave synthetic poly(cis-1,4-isoprene), confirming the involvement of Lcp in initial polymer cleavage. Specific anti-LcpK30 IgGs were employed in Western blot analysis to detect the secretion of Lcp in the supernatant. We have conducted an important experiment to demonstrate Lcp activity using the supernatant of these Lcp-expressing strains in vitro. All three strains obviously secreted a functional Lcp, as indicated by the formation of halo. Functional testing of Lcp with different plasmids in Escherichia coli strains and Pseudomonas strains was, however, not successful.

Phe317 is essential for rubber oxygenase RoxA activity

RoxA is an extracellular c-type diheme cytochrome secreted by Xanthomonas sp. strain 35Y during growth on rubber. RoxA cleaves poly(cis-1,4-isoprene) to 12-oxo-4,8-dimethyltrideca-4,8-diene-1-al (ODTD). Analysis of the RoxA structure revealed that Phe317 is located in close proximity (≈5 Å) to the N-terminal heme that presumably represents the active site. To find evidence of whether Phe317 is important for catalysis, we changed it to tyrosine, tryptophan, leucine, histidine, or alanine. All five RoxA muteins were expressed after integration of the respective gene into the chromosome of a Xanthomonas sp. ΔroxA strain. Residual clearing zone formation on opaque latex agar was found for Xanthomonas sp. strains expressing the Phe317Leu, Phe317Ala, or Phe317His variant (wild type > Leu > Ala > His). Strains in which Phe317 was changed to tyrosine or tryptophan were inactive. Phe317Ala and Phe312Leu RoxA muteins were purified, and polyisoprene cleavage activities were reduced to ≈3% and 10%, respectively. UV-visible spectroscopy of RoxA muteins confirmed that both heme groups were present in an oxidized form, but spectral responses to the addition of low-molecular-weight (inhibitory) ligand molecules such as imidazole and pyridine were different from those of wild-type RoxA. Our results show that residue 317 is involved in interaction with substrates. This is the first report on structure-function analysis of a polyisoprene-cleaving enzyme and on the identification of an amino acid that is essential for polyisoprene cleavage activity.

Historical and recent achievements in the field of microbial degradation of natural and synthetic rubber

This review intends to provide an overview of historical and recent achievements in studies of microbial degradation of natural and synthetic rubber. The main scientific focus is on the key enzymes latex-clearing protein (Lcp) from the Gram-positive Streptomyces sp. strain K30 and rubber oxygenase A (RoxA) from the Gram-negative Xanthomonas sp. strain 35Y, which has been hitherto the only known rubber-degrading bacterium that does not belong to the actinomycetes. We also emphasize the importance of knowledge of biodegradation in industrial and environmental biotechnology for waste natural rubber disposal.

16S rRNA gene sequences analysis of Ficus elastica rubber latex degrading thermophilic Bacillus strain ASU7 isolated from Egypt

A thermophilic Bacillus strain ASU7 was isolated from soil sample collected from Assiut governorate in Upper Egypt on latex rubber-containing medium at 45 °C. Genetically, the 16S bacterial ribosomal RNA gene of the strain ASU7 was amplified by the polymerase chain reaction (PCR) and sequenced. The sequence of the PCR product was compared with known 16S rRNA gene sequences in the GenBank database. Based on phylogenetic analyses, strain ASU7 was identified as Bacillus amyloliquefaciens. The strain was able to utilize Ficus elastica rubber latex as a sole source for carbon and energy. The ability for degradation was determined by measuring the increase in protein content of bacterium (mg/g dry wt), reduction in molecular weight (g/mol), and inherent viscosity (dl/g) of the latex. Moreover, the degradation was also confirmed by observing the growth of bacterium and formation of aldehyde or keto group using scanning electron microscopy (SEM) and shiff's reagent, respectively.

Involvement of two latex-clearing proteins during rubber degradation and insights into the subsequent degradation pathway revealed by the genome sequence of Gordonia polyisoprenivorans strain VH2

The increasing production of synthetic and natural poly(cis-1,4-isoprene) rubber leads to huge challenges in waste management. Only a few bacteria are known to degrade rubber, and little is known about the mechanism of microbial rubber degradation. The genome of Gordonia polyisoprenivorans strain VH2, which is one of the most effective rubber-degrading bacteria, was sequenced and annotated to elucidate the degradation pathway and other features of this actinomycete. The genome consists of a circular chromosome of 5,669,805 bp and a circular plasmid of 174,494 bp with average GC contents of 67.0% and 65.7%, respectively. It contains 5,110 putative protein-coding sequences, including many candidate genes responsible for rubber degradation and other biotechnically relevant pathways. Furthermore, we detected two homologues of a latex-clearing protein, which is supposed to be a key enzyme in rubber degradation. The deletion of these two genes for the first time revealed clear evidence that latex-clearing protein is essential for the microbial utilization of rubber. Based on the genome sequence, we predict a pathway for the microbial degradation of rubber which is supported by previous and current data on transposon mutagenesis, deletion mutants, applied comparative genomics, and literature search.

Isolation and characterization of Streptomyces, Actinoplanes, and Methylibium strains that are involved in degradation of natural rubber and synthetic poly(cis-1,4-isoprene)

Rubber-degrading bacteria were screened for the production of clearing zones around their colonies on latex overlay agar plates. Novel three bacteria, Streptomyces sp. strain LCIC4, Actinoplanes sp. strain OR16, and Methylibium sp. strain NS21, were isolated. To the best of our knowledge, this is the first report on the isolation of a Gram-negative rubber-degrading bacterium other than γ-proteobacteria. Gel permeation chromatography analysis revealed that these strains degraded poly(cis-1,4-isoprene) to low-molecular-weight products. The occurrence of aldehyde groups in the degradation products by NS21 was suggested by staining with Schiff's reagent and ¹H-nuclear magnetic resonance spectroscopy. The lcp gene of LCIC4, which showed 99% amino acid sequence identity with that of Streptomyces sp. strain K30, was cloned, and contained a putative twin-arginine motif at its N terminus. It is located next to oxiB, which is estimated to be responsible for oxidation of degradation intermediate of rubber in K30. Southern hybridization analysis using LCIC4 lcp probe revealed the presence of a lcp-homolog in OR16. These results suggest that the lcp-homologs are involved in rubber degradation in LCIC4 and OR16.

Development of a homologous expression system for rubber oxygenase RoxA from Xanthomonas sp

AIMS

Natural rubber (poly-[cis-1,4-isoprene]) can be cleaved into 12-oxo-4,8-dimethyltrideca-4,8-diene-1-al by rubber oxygenase A (RoxA) isolated from Xanthomonas sp. RoxA is a novel type of dihaem dioxygenase with unknown cleavage mechanism of the rubber carbon backbone. Analysis of mutant RoxA after mutagenesis could be a way to investigate the function of selected amino acids of RoxA during catalysis. Unfortunately, expression of functional RoxA in recombinant Escherichia coli or in recombinant γ-Proteobacteria such as Pseudomonas putida was not possible in our hands. Therefore, expression of recombinant RoxA in the homologous host, Xanthomonas, was performed.

METHODS AND RESULTS

A transformation system via electroporation was established, and a conjugation system was optimized for Xanthomonas sp. Inactivation of the chromosomal roxA gene by insertional mutagenesis resulted in inability of Xanthomonas sp. to produce active RoxA and to utilize rubber as a sole source of carbon and energy. When an intact copy of roxA was cloned under control of a rhamnose-inducible promoter in a broad host range vector and was transferred to Xanthomonas sp., high expression levels of functional RoxA in the presence of rhamnose were obtained.

CONCLUSIONS AND SIGNIFICANCE AND IMPACT OF THE STUDY

Purification of recombinantly expressed RoxA was simplified because of drastically shortened fermentation times and because separation of RoxA from remaining rubber latex particles was not necessary with rhamnose-induced cultures. About 6 mg purified RoxA were obtained from 1 l of cell-free culture fluid. Purified recombinant RoxA was highly active and revealed comparable spectral properties as RoxA purified from the wild type. The results of our study are the methodical basis for molecular biological manipulation in Xanthomonas sp. and will simplify investigation into the biochemical mechanisms by which rubber can be biodegraded in the environment by this novel extracellular dihaem dioxygenase RoxA.

Spectroscopic properties of rubber oxygenase RoxA from Xanthomonas sp., a new type of dihaem dioxygenase

Natural rubber [poly-(cis-1,4-isoprene)] is cleaved to 12-oxo-4,8-dimethyltrideca-4,8-diene-1-al (ODTD) by rubber oxygenase A (RoxA) isolated from Xanthomonas sp. RoxA has two c-type haem centres that show two distinct alpha-bands at 549 and 553 nm in the dithionite-reduced state. A well-resolved midpoint potential (E(0)') of -65 mV was determined for one haem by spectrophotometric titrations in the absence of dioxygen with dithionite and ferricyanide as reductant and oxidant, respectively. The midpoint potential of the second haem was not resolvable (E(0)' about -130 to -160 mV). One of the two haems was reduced by NADH (549 nm alpha-band), similar to bacterial dihaem peroxidases. Evidence for an electron transfer between the two haems was provided by slow reduction of the second haem (553 nm alpha-band) upon incubation of the partially reduced enzyme at room temperature. Addition of imidazole or related compounds to RoxA led to UV/vis spectral features similar to those observed for partially reduced RoxA. Notably, reduction of RoxA with dithionite or NADH, or binding of compounds such as imidazole, resulted in a reversible inactivation of the enzyme, unlike dihaem peroxidases. In line with this result, RoxA did not show any peroxidase activity. EPR spectra of RoxA as isolated showed two low-spin Fe(III) haem centres, with apparent g-values of 3.39, 3.09, 2.23, 1.92 and 1.50. A weak signal in the g=6 region resulting from a high-spin Fe(III) haem was also observed with a preparation-dependent intensity that disappeared in the presence of imidazole. Attempts to provide spectroscopic evidence for binding of the natural substrate (polyisoprene latex) to RoxA failed. However, experimental data are presented that RoxA is able to subtract redox equivalents from its substrate or from model compounds. In conclusion, RoxA is a novel type of dihaem dioxygenase with features clearly different from classical cytochrome c peroxidases.

Possible involvement of an extracellular superoxide dismutase (SodA) as a radical scavenger in poly(cis-1,4-isoprene) degradation

Gordonia westfalica Kb1 and Gordonia polyisoprenivorans VH2 induce the formation of an extracellular superoxide dismutase (SOD) during poly(cis-1,4-isoprene) degradation. To investigate the function of this enzyme in G. polyisoprenivorans VH2, the sodA gene was disrupted. The mutants exhibited reduced growth in liquid mineral salt media containing poly(cis-1,4-isoprene) as the sole carbon and energy source, and no SOD activity was detectable in the supernatants of the cultures. Growth experiments revealed that SodA activity is required for optimal growth on poly(cis-1,4-isoprene), whereas this enzyme has no effect on aerobic growth in the presence of water-soluble substrates like succinate, acetate, and propionate. This was detected by activity staining, and proof of expression was by antibody detection of SOD. When SodA from G. westfalica Kb1 was heterologously expressed in the sodA sodB double mutant Escherichia coli QC779, the recombinant mutant exhibited increased resistance to paraquat, thereby indicating the functionality of the G. westfalica Kb1 SodA and indirectly protection of G. westfalica cells by SodA from oxidative damage. Both sodA from G. polyisoprenivorans VH2 and sodA from G. westfalica Kb1 coded for polypeptides comprising 209 amino acids and having approximately 90% and 70% identical amino acids, respectively, to the SodA from Mycobacterium smegmatis strain MC(2) 155 and Micrococcus luteus NCTC 2665. As revealed by activity staining experiments with the wild type and the disruption mutant of G. polyisoprenivorans, this bacterium harbors only one active SOD belonging to the manganese family. The N-terminal sequences of the extracellular SodA proteins of both Gordonia species showed no evidence of leader peptides for the mature proteins, like the intracellular SodA protein of G. polyisoprenivorans VH2, which was purified under native conditions from the cells. In G. westfalica Kb1 and G. polyisoprenivorans VH2, SodA probably provides protection against reactive oxygen intermediates which occur during degradation of poly(cis-1,4-isoprene).

Cloning and characterization of alpha-methylacyl coenzyme A racemase from Gordonia polyisoprenivorans VH2

The mcr gene of Gordonia polyisoprenivorans VH2 is not clustered with genes required for rubber degradation. Its disruption by insertion of a kanamycin resistance cassette impaired growth on methyl-branched isoprenoids but not on linear hydrocarbons. Intact mcr from this bacterium or from Nocardia farcinica IFM 10152 complemented the mutant. Reverse transcription analysis showed similar mcr(VH2) expression results during cultivation with poly(cis-1,4-isoprene) and propionate. Additional genes coding for a putative cytochrome P450 monooxygenase and a short-chain dehydrogenase/reductase involved in beta-oxidation and poly(cis-1,4-isoprene) degradation were also characterized.

Secretion and transcriptional regulation of the latex-clearing protein, Lcp, by the rubber-degrading bacterium Streptomyces sp. strain K30

About 22,000 1-methyl-3-nitro-1-nitrosoguanidine- and UV-induced mutants of the rubber-degrading bacterium Streptomyces sp. strain K30 were characterized for the ability to produce clear zones on natural rubber latex overlay agar plates. Thirty-five mutants were defective solely in cleavage of rubber and were phenotypically complemented with the wild-type lcp (latex clearing protein) gene. Sixty-nine mutants exhibited a pleiotropic phenotype and were impaired in utilization of rubber and xylan, indicating that the enzymes responsible for the initial cleavage of these polymers are exported by the same secretion pathway (Q. K. Beg, M. Kapoor, L. Mahajan, and G. S. Hoondal, Appl. Microbiol. Biotechnol. 56:326-3381, 2001; U. K. Laemmli, Nature 227:680-685, 1970). Analysis of the amino acid sequence encoded by lcp revealed a twin-arginine motif, indicating that Lcp is a substrate of the twin-arginine translocation (Tat) pathway (K. Dilks, W. Rose, E. Hartmann, and M. Pohlschröder, J. Bacteriol. 185:1478-1483, 2003). A tatC disruption mutant of Streptomyces lividans 10-164 harboring lcp from Streptomyces sp. strain K30 was not capable of forming clear zones on rubber overlay agar plates. Moreover, Lcp and enhanced green fluorescent protein fusion proteins were detected in the supernatant. Using Escherichia coli having the twin-arginine motif in the signal peptide upstream of Lcp, clear evidence that Lcp is secreted was obtained. Transcriptional analysis revealed basal expression of Lcp in glucose-grown cells and that transcription of lcp is obviously induced in the presence of poly(cis-1,4-isoprene). In contrast, oxiB and oxiA, which are located directly downstream of lcp and putatively encode a heteromultimeric aldehyde dehydrogenase oxidizing the primary cleavage products generated by Lcp from poly(cis-1,4-isoprene), were expressed only in the presence of poly(cis-1,4-isoprene). Expression of lcp at a low level is thus required for sensing the polymer in the medium. Rubber degradation products may then induce the transcription of genes coding for enzymes catalyzing the later steps of poly(cis-1,4-isoprene) degradation and the transcription of lcp itself. lcp, oxiB, and oxiA seem to constitute an operon, as a polycistronic mRNA comprising these three genes was detected. The transcriptional start site of lcp was mapped 400 bp upstream of the lcp start codon.

PHA-rubber blends: synthesis, characterization and biodegradation

Medium chain length polyhydroxyalkanoates (mcl-PHA) and different rubbers; namely natural rubber, nitrile rubber and butadiene rubber were blended at room temperature using solution blending technique. Blends constituted 5%, 10% and 15% of mcl-PHA in different rubbers. Thermogravimetric analysis of mcl-PHA showed the melting temperature of the polymer around 50 degrees C. Thermal properties of the synthesized blend were studied by Differential Scanning Calorimetry which confirmed effective blending between the polymers. Blending of mcl-PHA with natural rubber led to the synthesis of a different polymer having the melting point of 90 degrees C. Degradation studies of the blends were carried out using a soil isolate, Pseudomonas sp. 202 for 30 days. Extracellular protein concentration as well as OD660 due to the growth of Pseudomonas sp. 202 was studied. The degradation of blended plastic material, as evidenced by % weight loss after degradation and increase in the growth of organism correlated with the amount of mcl-PHA present in the sample. Growth of Pseudomonas sp. 202 resulted in 14.63%, 16.12% and 3.84% weight loss of PHA:rubber blends (natural, nitrile and butadiene rubber). Scanning electron microscopic studies after 30 days of incubation further confirmed biodegradation of the films.

The genomes of the non-clearing-zone-forming and natural-rubber- degrading species Gordonia polyisoprenivorans and Gordonia westfalica harbor genes expressing Lcp activity in Streptomyces strains

The latex-clearing protein (Lcp(K30)) from the rubber-degrading bacterium Streptomyces sp. strain K30 is involved in the cleavage of poly(cis-1,4-isoprene), yielding isoprenoid aldehydes and ketones. Lcp homologues have so far been detected in all investigated clearing-zone-forming rubber-degrading bacteria. Internal degenerated oligonucleotides derived from lcp genes of Streptomyces sp. strain K30 (lcp(K30)), Streptomyces coelicolor strain A3(2), and Nocardia farcinica strains IFM10152 and E1 were applied in PCR to investigate whether lcp homologues occur also in the non-clearing-zone-forming rubber-utilizing bacteria Gordonia polyisoprenivorans strains VH2 and Y2K, Gordonia alkanivorans strain 44187, and Gordonia westfalica strain Kb1, which grow adhesively on rubber. The 1,230- and 1,224-bp lcp-homologous genes from G. polyisoprenivorans strain VH2 (lcp(VH2)) and G. westfalica strain Kb1 (lcp(Kb1)) were obtained after screening genomic libraries by degenerated PCR amplification, and their translational products exhibited 50 and 52% amino acid identity, respectively, to Lcp(K30). Recombinant lcp(VH2) and lcp(Kb1) harboring cells of the non-rubber-degrading Streptomyces lividans strain TK23 were able to form clearing zones and aldehydes on latex overlay-agar plates, thus indicating that lcp(VH2) and lcp(Kb1) encode functionally active proteins. Analysis by gel permeation chromatography demonstrated lower polymer concentrations and molecular weights of the remaining polyisoprenoid molecules after incubation with these recombinant S. lividans strains. Reverse transcription-PCR analysis demonstrated that lcp(VH2) was transcribed in cells of G. polyisoprenivorans strain VH2 cultivated in the presence of poly(cis-1,4-isoprene) but not in the presence of sodium acetate. Anti-Lcp(K30) immunoglobulin Gs, which were raised in this study, were rather specific for Lcp(K30) and did not cross-react with Lcp(VH2) and Lcp(Kb1). A lcp(VH2) disruption mutant was still able to grow with poly(cis-1,4-isoprene) as sole carbon source; therefore, lcp(VH2) seems not to be essential for rubber degradation in G. polyisoprenivorans.

Identification of poly(cis-1,4-Isoprene) degradation intermediates during growth of moderately thermophilic actinomycetes on rubber and cloning of a functional lcp homologue from Nocardia farcinica strain E1

The enrichment and isolation of thermophilic bacteria capable of rubber [poly(cis-1,4-isoprene)] degradation revealed eight different strains exhibiting both currently known strategies used by rubber-degrading mesophilic bacteria. Taxonomic characterization of these isolates by 16S rRNA gene sequence analysis demonstrated closest relationships to Actinomadura nitritigenes, Nocardia farcinica, and Thermomonospora curvata. While strains related to N. farcinica exhibited adhesive growth as described for mycolic acid-containing actinomycetes belonging to the genus Gordonia, strains related to A. nitritigenes and T. curvata formed translucent halos on natural rubber latex agar as described for several mycelium-forming actinomycetes. For all strains, optimum growth rates were observed at 50 degrees C. The capability of rubber degradation was confirmed by mineralization experiments and by gel permeation chromatography (GPC). Intermediates resulting from early degradation steps were purified by preparative GPC, and their analysis by infrared spectroscopy revealed the occurrence of carbonyl carbon atoms. Staining with Schiff's reagent also revealed the presence of aldehyde groups in the intermediates. Bifunctional isoprenoid species terminated with a keto and aldehyde function were found by matrix-assisted laser desorption ionization-time-of-flight and electrospray ionization mass spectrometry analyses. Evidence was obtained that biodegradation of poly(cis-1,4-isoprene) is initiated by endocleavage, rather than by exocleavage. A gene (lcp) coding for a protein with high homology to Lcp (latex-clearing protein) from Streptomyces sp. strain K30 was identified in Nocardia farcinica E1. Streptomyces lividans TK23 expressing this Lcp homologue was able to cleave synthetic poly(cis-1,4-isoprene), confirming its involvement in initial polymer cleavage.

Identification of linear plasmid pAM1 in the flavonoid degrading strain Actinoplanes missouriensis(T) (DSM 43046)

By pulsed-field gel electrophoresis, a linear DNA element of about 100 kb was identified in Actinoplanes missouriensis(T) DSM 43046, which grows on the flavonoids hesperidin, rutin and quercetin, and which contains a CO forming quercetinase. Among six Actinoplanes species and strains tested, including A. globisporus(T) DSM 43857, A. philippinensis(T) DSM 43019, A. brasiliensis(T) DSM 43805, A. auranticolor(T) DSM 43031, and A. utahensis(T) DSM 43147, only the A. missouriensis strain exhibited such a genetic element. The linear plasmid, named pAM1, has proteins covalently attached to its 5'-ends like other linear replicons of actinomycetes. Attempts to cure pAM1 failed, however a mutant with reduced plasmid content was obtained, which showed reduced ability to degrade the flavonoid rutinosides rutin and hesperidin. Plasmid pAM1 is the first extrachromosomal genetic element identified in an Actinoplanes species and may be useful to develop genetic tools for biotechnologically important Actinoplanes strains.

Establishment of Tn5096-based transposon mutagenesis in Gordonia polyisoprenivorans

The transposons Tn5, Tn10, Tn611, and Tn5096 were characterized regarding transposition in Gordonia polyisoprenivorans strain VH2. No insertional mutants were obtained employing Tn5 or Tn10. The thermosensitive plasmid pCG79 harboring Tn611 integrated into the chromosome of G. polyisoprenivorans; however, the insertional mutants were fairly unstable und reverted frequently to the wild-type phenotype. In contrast, various stable mutants were obtained employing Tn5096-mediated transposon mutagenesis. Auxotrophic mutants, mutants defective or deregulated in carotenoid biosynthesis, and mutants defective in utilization of rubber and/or highly branched isoprenoid hydrocarbons were obtained by integration of plasmid pMA5096 harboring Tn5096 as a whole into the genome. From about 25,000 isolated mutants, the insertion loci of pMA5096 were subsequently mapped in 20 independent mutants in genes which could be related to the above-mentioned metabolic pathways or to putative regulation proteins. Analyses of the genotypes of pMA5096-mediated mutants defective in biodegradation of poly(cis-1,4-isoprene) did not reveal homologues to recently identified genes coding for enzymes catalyzing the initial cleavage of poly(cis-1,4-isoprene). One rubber-negative mutant was disrupted in mcr, encoding an alpha-methylacyl-coenzyme A racemase. This mutant was defective in degradation of poly(cis-1,4-isoprene) and also of highly branched isoprenoid hydrocarbons.

Heme-dependent rubber oxygenase RoxA of Xanthomonas sp. cleaves the carbon backbone of poly(cis-1,4-Isoprene) by a dioxygenase mechanism

Oxidative cleavage of poly(cis-1,4-isoprene) by rubber oxygenase RoxA purified from Xanthomonas sp. was investigated in the presence of different combinations of (16)O(2), (18)O(2), H(2)(16)O, and H(2)(18)O. 12-oxo-4,8-dimethyl-trideca-4,8-diene-1-al (ODTD; m/z 236) was the main cleavage product in the absence of (18)O-compounds. Incorporation of one (18)O atom in ODTD was found if the cleavage reaction was performed in the presence of (18)O(2) and H(2)(16)O. Incubation of poly(cis-1,4-isoprene) (with RoxA) or of isolated unlabeled ODTD (without RoxA) with H(2)(18)O in the presence of (16)O(2) indicated that the carbonyl oxygen atoms of ODTD significantly exchanged with oxygen atoms derived from water. The isotope exchange was avoided by simultaneous enzymatic reduction of both carbonyl functions of ODTD to the corresponding dialcohol (12-hydroxy-4,8-dimethyl-trideca-4,8-diene-1-ol (HDTD; m/z 240) during RoxA-mediated in vitro cleavage of poly(cis-1,4-isoprene). In the presence of (18)O(2), H(2)(16)O, and alcohol dehydrogenase/NADH, incorporation of two atoms of (18)O into the reduced metabolite HDTD was found (m/z 244), revealing that RoxA cleaves rubber by a dioxygenase mechanism. Based on the labeling results and the presence of two hemes in RoxA, a model of the enzymatic cleavage mechanism of poly(cis-1,4-isoprene) is proposed.