Synthesis of N-succinimidyl 4-[18F]fluorobenzoate, an agent for labeling proteins and peptides with 18F

Preclinical Evaluation of 18F-Labeled Anti-HER2 Nanobody Conjugates for Imaging HER2 Receptor Expression by Immuno-PET

The human growth factor receptor type 2 (HER2) is overexpressed in breast as well as other types of cancer. Immuno-PET, a noninvasive imaging procedure that could assess HER2 status in both primary and metastatic lesions simultaneously, could be a valuable tool for optimizing application of HER2-targeted therapies in individual patients. Herein, we have evaluated the tumor-targeting potential of the 5F7 anti-HER2 Nanobody (single-domain antibody fragment; ∼13 kDa) after (18)F labeling by 2 methods.

METHODS

The 5F7 Nanobody was labeled with (18)F using the novel residualizing label N-succinimidyl 3-((4-(4-(18)F-fluorobutyl)-1H-1,2,3-triazol-1-yl)methyl)-5-(guanidinomethyl)benzoate ((18)F-SFBTMGMB; (18)F-RL-I) and also via the most commonly used (18)F protein-labeling prosthetic agent N-succinimidyl 3-(18)F-fluorobenzoate ((18)F-SFB). For comparison, 5F7 Nanobody was also labeled using the residualizing radioiodination agent N-succinimidyl 4-guanidinomethyl-3-(125)I-iodobenzoate ((125)I-SGMIB). Paired-label ((18)F/(125)I) internalization assays and biodistribution studies were performed on HER2-expressing BT474M1 breast carcinoma cells and in mice with BT474M1 subcutaneous xenografts, respectively. Small-animal PET/CT imaging of 5F7 Nanobody labeled using (18)F-RL-I also was performed.

RESULTS

Internalization assays indicated that intracellularly retained radioactivity for (18)F-RL-I-5F7 was similar to that for coincubated (125)I-SGMIB-5F7, whereas that for (18)F-SFB-5F7 was lower than coincubated (125)I-SGMIB-5F7 and decreased with time. BT474M1 tumor uptake of (18)F-RL-I-5F7 was 28.97 ± 3.88 percentage injected dose per gram of tissue (%ID/g) at 1 h and 36.28 ± 14.10 %ID/g at 2 h, reduced by more than 90% on blocking with trastuzumab, indicating HER2 specificity of uptake, and was also 26%-28% higher (P < 0.05) than that of (18)F-SFB-5F7. At 2 h, the tumor-to-blood ratio for (18)F-RL-I-5F7 (47.4 ± 13.1) was significantly higher (P < 0.05) than for (18)F-SFB-5F7 (25.4 ± 10.3); however, kidney uptake was 28-36-fold higher for (18)F-RL-I-5F7.

CONCLUSION

(18)F-RL-I-5F7 is a promising tracer for evaluating HER2 status by immuno-PET; however, in settings in which renal background is problematic, strategies for reducing its kidney uptake may be needed.

N-Succinimidyl 3-((4-(4-[(18)F]fluorobutyl)-1H-1,2,3-triazol-1-yl)methyl)-5-(guanidinomethyl)benzoate ([(18)F]SFBTMGMB): a residualizing label for (18)F-labeling of internalizing biomolecules

Residualizing labeling methods for internalizing peptides and proteins are designed to trap the radionuclide inside the cell after intracellular degradation of the biomolecule. The goal of this work was to develop a residualizing label for the (18)F-labeling of internalizing biomolecules based on a template used successfully for radioiodination. N-Succinimidyl 3-((4-(4-[(18)F]fluorobutyl)-1H-1,2,3-triazol-1-yl)methyl)-5-(bis-Boc-guanidinomethyl)benzoate ([(18)F]SFBTMGMB-Boc2) was synthesized by a click reaction of an azide precursor and [(18)F]fluorohexyne in 8.5 ± 2.8% average decay-corrected radiochemical yield (n = 15). An anti-HER2 nanobody 5F7 was labeled with (18)F using [(18)F]SFBTMGMB ([(18)F]RL-I), obtained by the deprotection of [(18)F]SFBTMGMB-Boc2, in 31.2 ± 6.7% (n = 5) conjugation efficiency. The labeled nanobody had a radiochemical purity of >95%, bound to HER2-expressing BT474M1 breast cancer cells with an affinity of 4.7 ± 0.9 nM, and had an immunoreactive fraction of 62-80%. In summary, a novel residualizing prosthetic agent for labeling biomolecules with (18)F has been developed. An anti-HER2 nanobody was labeled using this prosthetic group with retention of affinity and immunoreactivity to HER2.

Development and characterization of an αvβ6-specific diabody and a disulfide-stabilized αvβ6-specific cys-diabody

INTRODUCTION

This work describes the development and characterization of two antibody fragments that specifically target the α(v)β(6) integrin, a non-covalent diabody and a disulfide-stabilized cys-diabody. The diabodies were analyzed for their ability to bind both immobilized and cell surface-bound α(v)β(6). Radiolabeling was done using non-site-specific and site-specific conjugation approaches with N-succinimidyl 4-[(18)F]fluorobenzoate ([(18)F]-SFB) and the bifunctional chelator 1,4,7-triazacyclononane-triacetic acid maleimide (NOTA-maleimide) and copper-64 ([(64)Cu]), respectively. The affects of each radiolabeling method on RCY, RCP, and immunoreactivity were analyzed for the [(18)F]-FB-α(v)β(6) diabody, [(18)F]-FB-α(v)β(6) cys-diabody, and the [(64)Cu]-NOTA-α(v)β(6) cys-diabody.

METHODS

Diabodies were constructed from the variable domains of the humanized 6.3G9 anti-α(v)β(6) intact antibody. The anti-α(v(β(6) cys-diabody was engineered with C-terminal cysteines to enable covalent dimerization and site-specific modification. Biochemical characterization included SDS-PAGE, Western blot, and electrospray ionization to confirm MW, and flow cytometry and ELISA experiments were used to determine binding affinity and specificity to α(v)β(6). The diabodies were radiolabeled with [(18)F]-SFB and in addition, the anti-α(v)β(6) cys-diabody was also radiolabeled site-specifically using NOTA-maleimide and [(64)Cu]. Immunoreactivities were confirmed using in vitro cell binding to DX3Puroβ(6) (α(v)β(6)+) and DX3Puro (α(v)β(6)-)cell lines.

RESULTS

The diabodies were purified from cell culture supernatants with purities >98%. Subnanomolar binding affinity towards αvβ6 was confirmed by ELISA (diabody IC(50)=0.8 nM, cys-diabody IC(50)=0.6 nM) and flow cytometry revealed high specificity only to the DX3Puroβ(6) cell line for both diabodies. RCYs were 22.6%±3.6% for the [(18)F]-FB-α(v)β(6) diabody, 8.3%±1.7% for the [(18)F]-FB-α(v)β(6) cys-diabody and 43.5%±5.5% for the [(64)Cu]-NOTA-α(v)β(6) cys-diabody. In vitro cell binding assays revealed excellent specificity and retention of immunoreactivity ([(18)F]-FB-α(v)β(6) diabody=58.7%±6.7%, [(18)F]-FB-α(v)β(6) cys-diabody=80.4%±4.4%, [(64)Cu]-NOTA-α(v)β(6) cys-diabody=59.4%±0.6%) regardless of the radiolabeling method used.

CONCLUSIONS

Two novel diabodies with excellent binding affinity and specificity for the α(v)β(6) integrin in vitro were developed. Radiolabeling of the diabodies with fluorine-18 ([(18)F]) and [(64)Cu] revealed advantages and disadvantages with regards to methodologies and RCYs, however immunoreactivities were well preserved regardless of radiolabeling approach.

Improved synthesis of [¹⁸F]FS-PTAD as a new tyrosine-specific prosthetic group for radiofluorination of biomolecules

A novel prosthetic group, 4-(p-([(18)F]fluorosulfonyl)phenyl)-1,2,4-triazoline-3,5-dione ([(18)F]FS-PTAD) for site-specific radiofluorination of tyrosine residue in small molecules is described. Coupling of [(18)F]FS-PTAD with L-tyrosine, N-acetyl-L-tyrosine methyl amide and phenol as model compounds were achieved in buffered aqueous solution at room temperature, resulting in the corresponding fluorinated tyrosine and phenol derivatives. The total synthesis time including radiosynthesis, HPLC purification and formulation was less than 60 min (n=15) with ≥98% radio chemical purity. An initial in vitro evaluation of [(18)F]FS-PTAD-tyrosine in glioma cell lines revealed moderate uptake.

Synthesis of fluorine-18 radio-labeled serum albumins for PET blood pool imaging

We sought to develop a practical, reproducible and clinically translatable method of radiolabeling serum albumins with fluorine-18 for use as a PET blood pool imaging agent in animals and man. Fluorine-18 radiolabeled fluoronicotinic acid-2,3,5,6-tetrafluorophenyl ester, [(18)F]F-Py-TFP was prepared first by the reaction of its quaternary ammonium triflate precursor with [(18)F]tetrabutylammonium fluoride ([(18)F]TBAF) according to a previously published method for peptides, with minor modifications. The incubation of [(18)F]F-Py-TFP with rat serum albumin (RSA) in phosphate buffer (pH9) for 15 min at 37-40 °C produced fluorine-18-radiolabeled RSA and the product was purified using a mini-PD MiniTrap G-25 column. The overall radiochemical yield of the reaction was 18-35% (n=30, uncorrected) in a 90-min synthesis. This procedure, repeated with human serum albumin (HSA), yielded similar results. Fluorine-18-radiolabeled RSA demonstrated prolonged blood retention (biological half-life of 4.8 hours) in healthy awake rats. The distribution of major organ radioactivity remained relatively unchanged during the 4 hour observation periods either by direct tissue counting or by dynamic PET whole-body imaging except for a gradual accumulation of labeled metabolic products in the bladder. This manual method for synthesizing radiolabeled serum albumins uses fluorine-18, a widely available PET radionuclide, and natural protein available in both pure and recombinant forms which could be scaled up for widespread clinical applications. These preclinical biodistribution and PET imaging results indicate that [(18)F]RSA is an effective blood pool imaging agent in rats and might, as [(18)F]HSA, prove similarly useful as a clinical imaging agent.

A two-step fluorinase enzyme mediated 18F labelling of an RGD peptide for positron emission tomography

Fluorine-18 radiolabelling of a peptide is conducted in water (pH 7.8 and 37 °C) using the fluorinase enzyme and a ‘click’ reaction.

Rational design of a fluopyram hapten and preparation of bioconjugates and antibodies for immunoanalysis

A fluopyram mimicking hapten was designed, immunochemically active bioconjugates were produced and high-affinity and specific antibodies to fluopyram were generated.

Fluorine-18 radiochemistry, labeling strategies and synthetic routes

Fluorine-18 is the most frequently used radioisotope in positron emission tomography (PET) radiopharmaceuticals in both clinical and preclinical research. Its physical and nuclear characteristics (97% β(+) decay, 109.7 min half-life, 635 keV positron energy), along with high specific activity and ease of large scale production, make it an attractive nuclide for radiochemical labeling and molecular imaging. Versatile chemistry including nucleophilic and electrophilic substitutions allows direct or indirect introduction of (18)F into molecules of interest. The significant increase in (18)F radiotracers for PET imaging accentuates the need for simple and efficient (18)F-labeling procedures. In this review, we will describe the current radiosynthesis routes and strategies for (18)F labeling of small molecules and biomolecules.

Improved and optimized one-pot method for N-succinimidyl-4-[(18)F]fluorobenzoate ([(18)F]SFB) synthesis using microwaves

N-Succinimidyl-4-[(18)F]fluorobenzoate ([(18)F]SFB) is a potential prosthetic agent for novel tracer development in positron emission tomography (PET). Previously, we reported a microwave-assisted one-pot synthesis of [(18)F]SFB with high efficacy. Herein, we reveal an improved and optimized approach based on this former model for producing [(18)F]SFB. With optimized approaches, the entire protocol can be completed within 25min, and [(18)F]SFB is generated in satisfactory quality for direct use without further purification via high-performance liquid chromatography.

Facile Preparation of a Thiol-Reactive (18)F-Labeling Agent and Synthesis of (18)F-DEG-VS-NT for PET Imaging of a Neurotensin Receptor-Positive Tumor

Accumulating evidence suggests that neurotensin receptors (NTRs) play key roles in cancer growth and survival. In this study, we developed a simple and efficient method to radiolabel neurotensin peptide with (18)F for NTR-targeted imaging.

METHODS

The thiol-reactive reagent (18)F-(2-(2-(2-fluoroethoxy)ethoxy)ethylsulfonyl)ethane ((18)F-DEG-VS) was facilely prepared through 1-step radiofluorination. After high-pressure liquid chromatography purification, (18)F-DEG-VS was incubated with the c(RGDyC) and c(RGDyK) peptide mixture to evaluate its specificity toward the reactive thiol. Thiolated neurotensin peptide was then labeled with (18)F using this novel synthon, and the resulting imaging probe was subjected to receptor-binding assay and small-animal PET studies in a murine xenograft model. The imaging results and metabolic stability of (18)F-DEG-VS-NT were compared with the thiol-specific maleimide derivative N-[2-(4-(18)F-fluorobenzamido)ethyl]maleimide-neurotensin ((18)F-FBEM-NT).

RESULTS

(18)F-DEG-VS was obtained in high labeling yield. The reaction of (19)F-DEG-VS was highly specific for thiols at neutral pH, whereas the lysine of c(RGDyK) reacted at a pH greater than 8.5. (18)F-DEG-VS-c(RGDyC) was the preferred product when both c(RGDyK) and c(RGDyC) were incubated together with (18)F-DEG-VS. Thiolated neurotensin peptide (Cys-NT) efficiently reacted with (18)F-DEG-VS, with a 95% labeling yield (decay-corrected). The radiochemical purity of the (18)F-DEG-VS-NT was greater than 98%, and the specific activity was about 19.2 ± 4.3 TBq/mmol. Noninvasive small-animal PET demonstrated that (18)F-DEG-VS-NT had an NTR-specific tumor uptake in subcutaneous HT-29 xenografts. The tumor-to-muscle, tumor-to-liver, and tumor-to-kidney ratios reached 30.65 ± 22.31, 11.86 ± 1.98, and 1.91 ± 0.43 at 2 h after injection, respectively, based on the biodistribution study. Receptor specificity was demonstrated by blocking experiment. Compared with (18)F-FBEM-NT, (18)F-DEG-VS-NT was synthesized with fewer steps and provided significantly improved imaging quality in vivo.

CONCLUSION

We have established a facile (18)F-labeling method for site-specific labeling of the Cys-NT. Using this method, we synthesized an NTR-targeted PET agent, which demonstrated high tumor-to-background contrast.

One-pot two-step radiosynthesis of a new (18)F-labeled thiol reactive prosthetic group and its conjugate for insulinoma imaging

N-(2-(2,5-dioxo-2,5-dihydro-1H-pyrrol-1-yl)ethyl)-6-fluoronicotinamide ([¹⁸F]FNEM), a novel prosthetic agent that is thiol-specific, was synthesized using a one-pot two-step strategy: (1) ¹⁸F incorporation by a nucleophilic displacement of trimethylammonium substrate under mild conditions; (2) amidation of the resulting 6-[¹⁸F]fluoronicotinic acid 2,3,5,6-tetrafluorophenyl ester with N-(2-aminoethyl)maleimide trifluoroacetate salt. The radiosynthesis of the maleimide tracer was completed in 75 min from [¹⁸F]fluoride with 26 ± 5% decay uncorrected radiochemical yield, and specific activity of 19–88 GBq/μmol (decay uncorrected). The in vitro cell uptake, in vivo biodistribution, and positron emission tomography (PET) imaging properties of its conjugation product with [Cys⁴⁰]-exendin-4 were described. [¹⁸F]FNEM-Cys⁴⁰-exendin-4 showed specific targeting of glucagon-like peptide 1 receptor (GLP-1R) positive insulinomas and comparable imaging results to our recently reported [¹⁸F]FPenM-Cys⁴⁰-exendin-4.

18F-radiolabeled GLP-1 analog exendin-4 for PET/CT imaging of insulinoma in small animals

BACKGROUND

Insulinoma is a neuroendocrine tumor derived from the β cells of pancreatic islets. They are usually relatively inaccessible for surgical intervention. High expression levels of glucagon-like peptide-1 (GLP-1) receptor have been detected in insulinoma.

AIM

The aim of the study was to evaluate the potential of F-radiolabeled GLP-1 analog exendin-4 for the diagnosis of insulinoma using PET/computed tomography imaging.

MATERIALS AND METHODS

The GLP-1 receptor-specific molecular probe [F]FB-exendin-4 was prepared by the conjugation of exendin-4 and N-succinimidyl-4-[F] fluorobenzoate ([F]SFB). High expression of GLP-1 by the RIN-m5f insulinoma line and GLP-1 receptor specificity were evaluated by determining the saturation curve for in-vitro binding of I-radiolabeled exendin-4 and by investigation of the competitive binding between I-radiolabeled and unlabeled exendin-4. Further, the in-vivo biodistribution and micro-PET/computed tomography images of insulinoma-bearing mice were studied.

RESULTS

An overall radiochemical yield of 35.6±2.3% (decay corrected, n=5) and specific radioactivity of around 30 GBq/µmol were achieved for [F]FB-exendin-4, and the radiochemical purity was over 98%. Both in-vitro and in-vivo studies confirmed the specificity of [F]FB-exendin-4 to insulinoma cells.

CONCLUSION

[F]FB-exendin-4 has been found to be an effective molecular imaging probe for detecting insulinomas.

Neither azeotropic drying, nor base nor other additives: a minimalist approach to 18F-labeling

A novel radiofluorination procedure using only precursor and [¹⁸F]fluoride without the need for azeotropic drying, base and other ingredients was developed.

Detection of activated platelets in a mouse model of carotid artery thrombosis with 18 F-labeled single-chain antibodies

INTRODUCTION

Activated platelets are key players in thrombosis and inflammation. We previously generated single-chain antibodies (scFv) against ligand-induced binding sites (LIBS) on the highly abundant platelet glycoprotein integrin receptor IIb/IIIa. The aim of this study was the construction and characterisation of a novel (18)F PET radiotracer based on this antibody.

METHODS

ScFv(anti-LIBS) and control antibody mut-scFv were reacted with N-succinimidyl-4-[(18)F]fluorobenzoate (S[(18)F]FB). Radiolabeled scFv was incubated with in vitro formed platelet clots and injected into mice with FeCl(3) induced thrombus in the left carotid artery. Clots were imaged in the PET scanner and amount of radioactivity measured using an ionization chamber and image analysis. Assessment of vessel injury as well as the biodistribution of the radiolabeled scFv was studied.

RESULTS

After incubation with increasing concentrations of (18)F-scFv(anti-LIBS) clots had retained significantly higher amounts of radioactivity compared to clots incubated with radiolabeled (18)F-mut-scFv (13.3 ± 3.8 vs. 3.6 ± 1 KBq, p < 0.05, n = 9, decay corrected). In the in vivo experiments we found an high uptake of the tracer in the injured vessel compared with the non-injured vessel, with 12.6 ± 4.7% injected dose per gram (ID/g) uptake in the injured vessel and 3.7 ± 0.9% ID/g in the non-injured vessel 5 minutes after injection (p < 0.05, n = 6).

CONCLUSIONS

Our results show that the novel antibody radiotracer (18)F-scFv(anti-LIBS) is useful for the sensitive detection of activated platelets and thrombosis.

ADVANCES IN KNOWLEDGE AND IMPLICATIONS FOR PATIENT CARE

We describe the first (18)F variant of a scFv(anti-LIBS) against activated platelets. This diagnostic agent could provide a powerful tool for the assessment of acute thrombosis and inflammation in patients in the future.

Development of a new thiol site-specific prosthetic group and its conjugation with [Cys(40)]-exendin-4 for in vivo targeting of insulinomas

A new tracer, N-5-[(18)F]fluoropentylmaleimide ([(18)F]FPenM), for site-specific labeling of free thiol group in proteins and peptides was developed. The tracer was synthesized in three steps ((18)F displacement of the aliphatic tosylate, di-Boc removal by TFA to expose free amine, and incorporation of the free amine into a maleimide). The radiosynthesis was completed in 110 min with 11-17% radiochemical yield (uncorrected), and specific activity of 20-49 GBq/μmol. [(18)F]FPenM showed comparable labeling efficiency with N-[2-(4-[(18)F]fluorobenzamido)ethyl]maleimide ([(18)F]FBEM). Its application was demonstrated by conjugation with glucagon-like peptide type 1 (GLP-1) analogue [cys(40)]-exendin-4. The cell uptake, binding affinity, imaging properties, biodistribution, and metabolic stability of the radiolabeled [(18)F]FPenM-[cys(40)]-exendin-4 were studied using INS-1 tumor cells and INS-1 xenograft model. Positron emission tomography (PET) results showed that the new thiol-specific tracer, [(18)F]FPenM-[cys(40)]-exendin-4, had high tumor uptake (20.32 ± 4.36%ID/g at 60 min postinjection) and rapid liver and kidney clearance, which was comparable to the imaging results with [(18)F]FBEM-[cys(40)]-exendin-4 reported by our group.

Biodistribution and elimination study of fluorine-18 labeled Nε-carboxymethyl-lysine following intragastric and intravenous administration

Background

N^ε-carboxymethyl-lysine (CML) is a major advanced glycation end-product (AGEs) widely found in foods. The aim of our study was to evaluate how exogenous CML-peptide is dynamically absorbed from the gastrointestinal tract and eliminated by renal tubular secretion using microPET imaging.

Methods

The present study consisted of three investigations. In study I, we synthesized the imaging tracer ¹⁸F-CML by reacting N-succinimidyl 4-¹⁸F-fluorobenzoate (¹⁸F-SFB) with CML. In study II, the biological activity of ¹⁸F-CML was evaluated in RAW264.7 cells and HepG2 cells. In study III, the biodistribution and elimination of AGEs in ICR mice were studied in vivo following tail vein injection and intragastric administration of ¹⁸F-CML.

Result

The formation of ¹⁸F-CML was confirmed by comparing its retention time with the corresponding reference compound ¹⁹F-CML. The radiochemical purity (RCP) of ¹⁸F-CML was >95%, and it showed a stable character in vitro and in vivo. Uptake of ¹⁸F-CML by RAW264.7 cells and HepG2 cells could be inhibited by unmodified CML. ¹⁸F-CML was quickly distributed via the blood, and it was rapidly excreted through the kidneys 20 min after tail vein injection. However, ¹⁸F-CML was only slightly absorbed following intragastric administration. After administration of ¹⁸F-CML via a stomach tube, the radioactivity was completely localized in the stomach for the first 15 min. At 150 min post intragastric administration, intense accumulation of radioactivity in the intestines was still observed.

Conclusions

PET technology is a powerful tool for the in vivo analysis of the gastrointestinal absorption of orally administered drugs. ¹⁸F-CML is hardly absorbed by the gastrointestinal tract. It is rapidly distributed and eliminated from blood following intravenous administration. Thus, it may not be harmful to healthy bodies. Our study showed the feasibility of noninvasively imaging ¹⁸F-labeled AGEs and was the first to describe CML-peptide gastrointestinal absorption by means of PET.

Evaluation of 18F-labeled targeted perfluorocarbon-filled albumin microbubbles as a probe for microUS and microPET in tumor-bearing mice

OBJECTIVE

In this study, albumin-shelled, targeted MBs (tMBs) were first demonstrated with the expectation of visualization of biodistribution of albumin-shelled tMBs. The actual biodistribution of albumin-shelled tMBs is of vital importance either for molecular imaging or for drug delivery.

MOTIVATION

Recently, albumin microbubbles (MBs) have been studied for drug and gene delivery in vitro and in vivo through cavitation. Targeted lipid-shelled MBs have been applied for ultrasound molecular imaging and conjugated with radiolabeled antibodies for whole-body biodistribution evaluations. The novelty of the work is that, in addition to the lipid tMBs, the albumin tMBs was also applied in biodistribution detection.

METHODS

Multimodality albumin-shelled, (18)F-SFB-labeled VEGFR2 tMBs were synthesized, and their characteristics in mice bearing MDA-MB-231 human breast cancer were investigated with micro-positron-emission tomography (microPET) and high-frequency ultrasound (microUS).

RESULTS

Albumin-shelled MBs can be labeled with (18)F-SFB directly and conjugated with antibodies for dual molecular imaging. The albumin-shelled tMBs show a lifetime in 30min in the blood pool and a highly specific adherence to tumor vessels in mice bearing human breast cancer.

CONCLUSIONS

From the evaluations of whole-body biodistribution, the potential of the dual molecular imaging probe for drug or gene delivery in animal experiments with albumin shelled MBs has been investigated.

Site-selective radiolabeling of peptides by (18)F-fluorobenzoylation with [(18F)]SFB in solution and on solid phase: a comparative study

Peptides labeled with short-lived positron-emitting radionuclides are of outstanding interest as probes for molecular imaging by positron emission tomography (PET). Herein, the site-selective incorporation of fluorine-18 into lysine-containing peptides using the prosthetic labeling agent N-succinimidyl 4-[(18)F]fluorobenzoate ([(18)F]SFB) is described. The reaction of [(18)F]SFB with four biologically relevant resin-bound peptides was studied and optimized. For comparison, each peptide was 18F-fluorobenzoylated in solution under different conditions and the product distribution was analyzed confirming the advantages of the solid-phase approach. The method's feasibility for selective radiolabeling either at the N-terminus or at the lysine side chain was demonstrated. Labeling on solid phase with [(18)F]SFB resulted in crude (18)F-fluorobenzoylpeptides whose radiochemical purities were typically greater than 90% and that could be prepared in synthesis times from 65 to 76 min.

Radiopharmaceutical development of radiolabelled peptides

Receptor targeting with radiolabelled peptides has become very important in nuclear medicine and oncology in the past few years. The overexpression of many peptide receptors in numerous cancers, compared to their relatively low density in physiological organs, represents the molecular basis for in vivo imaging and targeted radionuclide therapy with radiolabelled peptide-based probes. The prototypes are analogs of somatostatin which are routinely used in the clinic. More recent developments include somatostatin analogs with a broader receptor subtype profile or with antagonistic properties. Many other peptide families such as bombesin, cholecystokinin/gastrin, glucagon-like peptide-1 (GLP-1)/exendin, arginine-glycine-aspartic acid (RGD) etc. have been explored during the last few years and quite a number of potential radiolabelled probes have been derived from them. On the other hand, a variety of strategies and optimized protocols for efficient labelling of peptides with clinically relevant radionuclides such as (99m)Tc, M(3+) radiometals ((111)In, (86/90)Y, (177)Lu, (67/68)Ga), (64/67)Cu, (18)F or radioisotopes of iodine have been developed. The labelling approaches include direct labelling, the use of bifunctional chelators or prosthetic groups. The choice of the labelling approach is driven by the nature and the chemical properties of the radionuclide. Additionally, chemical strategies, including modification of the amino acid sequence and introduction of linkers/spacers with different characteristics, have been explored for the improvement of the overall performance of the radiopeptides, e.g. metabolic stability and pharmacokinetics. Herein, we discuss the development of peptides as radiopharmaceuticals starting from the choice of the labelling method and the conditions to the design and optimization of the peptide probe, as well as some recent developments, focusing on a selected list of peptide families, including somatostatin, bombesin, cholecystokinin/gastrin, GLP-1/exendin and RGD.

Highly efficient click labeling using 2-[¹⁸F]fluoroethyl azide and synthesis of an ¹⁸FN-hydroxysuccinimide ester as conjugation agent

INTRODUCTION

Click labeling using 2-[¹⁸F]fluoroethyl azide has been proven to be promising methods of radiolabeling small molecules and peptides, some of which are undergoing clinical evaluations. However, the previously reported method afforded low yield, poor purities and under desirable reproducibility.

METHODS

A vacuum distillation method was used to isolate 2-[¹⁸F]fluoroethyl azide, and the solvent effect of acetonitrile and dimethylformamide (DMF) on the click labeling using Cu(I) from copper sulfate/sodium ascorbate was studied. The labeling conditions were optimized to radiosynthesize a hydroxysuccinimide ester (N-hydroxysuccinimide, or NHS).

RESULTS

2-[¹⁸F]fluoroethyl azide was isolated by the vacuum distillation method with >80% yield within 10min in a "pure" and click-ready form. It was found that the amount of DMF was critical for maintaining high levels of Cu(I) from copper sulfate/sodium ascorbate in order to rapidly complete the click labeling reaction. The addition of bathophenanthrolinedisulfonic acid disodium salt to the mixture of copper sulfate/sodium ascorbate also greatly improved the click labeling efficiency. Through exploiting these optimizations, a base-labile NHS ester was rapidly radiosynthesized in 90% isolated yield with good chemical and radiochemical purities.

CONCLUSIONS

We have developed a general method to click-label small molecules efficiently using [¹⁸F]2 for research and clinical use. This NHS ester can be used for conjugation chemistry to label antibodies, peptides and small molecules as positron emission tomography tracers.

Copper-Free Click for PET: Rapid 1,3-Dipolar Cycloadditions with a Fluorine-18 Cyclooctyne

The strain-promoted click 1,3-dipolar cycloaddition reactions involving azides and cyclooctynes for the synthesis of triazoles offer the advantage of being able to be performed in biological settings via copper-free chemistries. While strained reagents conjugated to optical dyes and radiometal conjugates have been reported, cyclooctyne reagents labeled with fluorine-18 ((18)F) and radiochemically evaluated in a copper-free click reaction have yet to be explored. This report describes the conversion of a bifunctional azadibenzocyclooctyne (ADIBO) amine to the (18)F-labeled cyclooctyne 4, the subsequent fast copper-free 1,3-dipolar cycloaddition reaction with alkyl azides at 37 °C (>70% radiochemical conversion in 30 min), and biological evaluations (serum stability of >95% at 2 h). These findings demonstrate the excellent reactivity of the (18)F-labeled cyclooctyne 4 with readily available azides that will allow future work focusing on rapid copper-free in vitro and in vivo click chemistries for PET imaging using (18)F-labeled cyclooctyne derivatives of ADIBO.

Tetrazine-trans-cyclooctene ligation for the rapid construction of integrin αvβ₃ targeted PET tracer based on a cyclic RGD peptide

Labeling biomolecules with (18)F is usually done through coupling with prosthetic groups, which generally requires several time-consuming radiosynthetic steps resulting in low labeling yield. Recently, the tetrazine-trans-cyclooctene ligation has been introduced as a method of bioconjugation that proceeds with fast reaction rates without need for catalysis. Herein, we report the development of an extremely fast and efficient method for generating (18)F labeled probes based on the tetrazine-trans-cyclooctene ligation. Starting with only 30 μg (78 μM) of a tetrazine-RGD conjugate and 2 mCi (5 μM) of (18)F-trans-cyclooctene, the (18)F labeled RGD peptide could be obtained in more than 90% yield within five minutes. The (18)F labeled RGD peptide demonstrated prominent tumor uptake in vivo. The receptor specificity was confirmed by blocking experiments. These results successfully demonstrate that the tetrazine-trans-cyclooctene ligation serves as an efficient labeling method for PET probe construction.

Microwave-assisted one-pot synthesis of N-succinimidyl-4[ ¹⁸F]fluorobenzoate ([¹⁸F]SFB)

Biomolecules, including peptides¹⁻⁹, proteins¹⁰⁻¹¹, and antibodies and their engineered fragments¹²⁻¹⁴, are gaining importance as both potential therapeutics and molecular imaging agents. Notably, when labeled with positron-emitting radioisotopes (e.g., Cu-64, Ga-68, or F-18), they can be used as probes for targeted imaging of many physiological and pathological processes.¹⁵⁻¹⁸ Therefore, significant effort has devoted to the synthesis and exploration of ¹⁸F-labeled biomolecules. Although there are elegant examples of the direct ¹⁸F-labeling of peptides,¹⁹⁻²² the harsh reaction conditions (i.e., organic solvent, extreme pH, high temperature) associated with direct radiofluorination are usually incompatible with fragile protein samples. To date, therefore, the incorporation of radiolabeled prosthetic groups into biomolecules remains the method of choice.²³(,)²⁴ N-Succinimidyl-4-[¹⁸F]fluorobenzoate ([¹⁸F]SFB),²⁵⁻³⁷ a Bolton-Hunter type reagent that reacts with the primary amino groups of biomolecules, is a very versatile prosthetic group for the ¹⁸F-labeling of a wide spectrum of biological entities, in terms of its evident in vivo stability and high radiolabeling yield. After labeling with [¹⁸F]SFB, the resulting [F]fluorobenzoylated biomolecules could be explored as potential PET tracers for in vivo imaging studies.¹ Most [¹⁸F]SFB radiosyntheses described in the current literatures require two or even three reactors and multiple purifications by using either solid phase extraction (SPE) or high-performance liquid chromatography (HPLC). Such lengthy processes hamper its routine production and widespread applications in the radiolabeling of biomolecules. Although several module-assisted [¹⁸F]SFB syntheses have been reported²⁹⁻³²,⁴¹⁻⁴² they are mainly based on complicated and lengthy procedures using costly commercially-available radiochemistry boxes (Table 1). Therefore, further simplification of the radiosynthesis of [¹⁸F]SFB using a low-cost setup would be very beneficial for its adaption to an automated process. Herein, we report a concise preparation of [¹⁸F]SFB, based on a simplified one-pot microwave-assisted synthesis (Figure 1). Our approach does not require purification between steps or any aqueous reagents. In addition, microwave irradiation, which has been used in the syntheses of several PET tracers,³⁸⁻⁴¹ can gives higher RCYs and better selectivity than the corresponding thermal reactions or they provide similar yields in shorter reaction times.³⁸Most importantly, when labeling biomolecules, the time saved could be diverted to subsequent bioconjugation or PET imaging step. ²⁸(,)⁴³The novelty of our improved [¹⁸F]SFB synthesis is two-fold: (1) the anhydrous deprotection strategy requires no purification of intermediate(s) between each step and (2) the microwave-assisted radiochemical transformations enable the rapid, reliable production of [¹⁸F]SFB.

Highlighting the Versatility of the Tracerlab Synthesis Modules. Part 1: Fully Automated Production of [F]Labelled Radiopharmaceuticals using a Tracerlab FX(FN)

The field of radiochemistry is moving towards exclusive use of automated synthesis modules for production of clinical radiopharmaceutical doses. Such a move comes with many advantages, but also presents radiochemists with the challenge of re-configuring synthesis modules for production of radiopharmaceuticals that require non-conventional radiochemistry whilst maintaining full automation. This review showcases the versatility of the Tracerlab FX(FN) synthesis module by presenting simple, fully automated methods for producing [(18)F]FLT, [(18)F]FAZA, [(18)F]MPPF, [(18)F]FEOBV, [(18)F]sodium fluoride, [(18)F]fluorocholine and [(18)F]SFB.

Assessing antibody pharmacokinetics in mice with in vivo imaging

Recent advances in small-animal molecular imaging instrumentation combined with well characterized antibody-labeling chemistry have enabled detailed in vivo measurements of antibody distribution in mouse models. This article reviews the strengths and limitations of in vivo antibody imaging methods with a focus on positron emission tomography and single-photon emission computed tomography and a brief discussion of the role of optical imaging in this application. A description of the basic principles behind the imaging techniques is provided along with a discussion of radiolabeling methods relevant to antibodies. Practical considerations of study design and execution are presented through a discussion of sensitivity and resolution tradeoffs for these techniques as defined by modality, signaling probe (isotope or fluorophore) selection, labeling method, and radiation dosimetry. Images and analysis results from a case study are presented with a discussion of output data content and relevant informatics gained with this approach to studying antibody pharmacokinetics.

Automated radiosynthesis of the thiol-reactive labeling agent N-[6-(4-[18F]fluorobenzylidene)aminooxyhexyl]maleimide ([18F]FBAM)

The two-step radiosynthesis of N-[6-(4-[(18)F]fluorobenzylidene)aminooxyhexyl]maleimide ([(18)F]FBAM) was adapted to a remotely controlled synthesizer module. After optimization of reaction conditions as well as solid phase extraction based purification steps, the final [(18)F]FBAM was obtained in a decay-corrected radiochemical yield of 29±4% (related to [(18)F]fluoride, n=12) within a total synthesis time of 40 min. The radiochemical purity of [(18)F]FBAM was in the range 94-98%, the specific activity was determined with 13.4-17.2 GBq/μmol.

Automated radiochemical synthesis of [18F]FBEM: a thiol reactive synthon for radiofluorination of peptides and proteins

The automated radiochemical synthesis of N-[2-(4-[(18)F]fluorobenzamido)ethyl]maleimide ([(18)F]FBEM, IUPAC name: N-maleoylethyl-4-[(18)F]fluorobenzamide), a prosthetic group for radiolabeling the free sulfhydryl groups of peptides and proteins, is herein described. 4-[(18)F]fluorobenzoic acid was first prepared by nucleophilic displacement of a trimethylammonium moiety on a pentamethylbenzyl benzoate ester with [(18)F]fluoride. In the second step the ester was cleaved under acidic conditions. Finally, 4-[(18)F]fluorobenzoic acid was coupled to N-(2-aminoethyl)maleimide using diethylcyanophosphate and diisopropylethyl amine. Following high-performance liquid chromatography (HPLC) purification, [(18)F]FBEM was obtained in 17.3±7.1% yield (not decay corrected) in approximately 95 min. Isolation from the HPLC eluate and preparation for subsequent use, which was conducted manually, required an additional 10-15 min. The measured specific activity for three batches was 181.3, 251.6, and 351.5 GBq/μmol at the end of bombardment (EOB).

Tetrazine-trans-cyclooctene ligation for the rapid construction of 18F labeled probes

A radiolabeling method for bioconjugation based on the Diels-Alder reaction between 3,6-diaryl-s-tetrazines and an (18)F-labeled trans-cyclooctene is described. The reaction proceeds with exceptionally fast rates, making it an effective conjugation method within seconds at low micromolar concentrations.

Hapten synthesis, monoclonal antibody generation, and development of competitive immunoassays for the analysis of picoxystrobin in beer

This paper describes the original synthesis of a functionalized derivative of the fungicide picoxystrobin and the generation of the first reported monoclonal antibodies against this strobilurin pesticide. The synthetic hapten was prepared by total synthesis from commercial chemicals and incorporating the spacer arm through a carbon-carbon single bond. Also, to obtain the immunogen, an uncommon hapten activation strategy based on N,N'-disuccinimidyl carbonate was employed, affording high activation yields and clean and reproducible coupling results. With these immunoreagents, two enzyme-linked immunosorbent assays (ELISAs) were developed: a competitive one-step assay using the antibody-coated direct ELISA format and a competitive two-step assay with the conjugate-coated indirect ELISA procedure. Both immunoassays were characterized in terms of sensitivity, selectivity, tolerance to solvents and matrix effects, achieving limits of detection below 0.2 μgL(-1). The optimized assays were used for the determination of picoxystrobin residues in beer, with recovery values ranging between 90 and 121% for the direct assay and from 79 to 122% for the indirect assay.

Radiopharmaceutical chemistry for positron emission tomography

Molecular imaging is an emerging technology that allows the visualization of interactions between molecular probes and biological targets. Molecules that either direct or are subject to homeostatic controls in biological systems could be labeled with the appropriate radioisotopes for the quantitative measurement of selected molecular interactions during normal tissue homeostasis and again after perturbations of the normal state. In particular, positron emission tomography (PET) offers picomolar sensitivity and is a fully translational technique that requires specific probes radiolabeled with a usually short-lived positron-emitting radionuclide. PET has provided the capability of measuring biological processes at the molecular and metabolic levels in vivo by the detection of the gamma rays formed as a result of the annihilation of the positrons emitted. Despite the great wealth of information that such probes can provide, the potential of PET strongly depends on the availability of suitable PET radiotracers. However, the development of new imaging probes for PET is far from trivial and radiochemistry is a major limiting factor for the field of PET. In this review, we provided an overview of the most common chemical approaches for the synthesis of PET-labeled molecules and highlighted the most recent developments and trends. The discussed PET radionuclides include ¹¹C (t₁(/)₂=20.4min), ¹³N (t₁(/)₂=9.9min), ¹⁵O (t₁(/)₂=2min), ⁶⁸Ga (t₁(/)₂=68min), ¹⁸F (t₁(/)₂=109.8min), ⁶⁴Cu (t₁(/)₂=12.7h), and ¹²⁴I (t₁(/)₂=4.12d).

Target-specific delivery of peptide-based probes for PET imaging

Positron emission tomography (PET) is one of the most rapidly growing areas of medical imaging, with many applications in the clinical management of patients with various diseases. The principal goal of PET imaging is to visualize, characterize, and measure biological processes at the cellular, subcellular, and molecular level in living subjects with non-invasive procedures. PET imaging takes advantage of the traditional diagnostic imaging techniques and introduces positron-emitting probes to determine the expression of indicative molecular targets at different stages of disease. During the last decade, advances in molecular biology have revealed an increasing number of potential molecular targets, including peptide receptors and peptide-related biomolecules. With the help of sophisticated bioconjugation and radiolabeling techniques, numerous peptide-based agents have been developed and evaluated for delivery of PET radionuclides to the specific molecular targets in preclinical and clinical studies. As compared to macromolecules, such as proteins or antibodies, low-molecular-weight peptides have their distinctive advantages and predominantly demonstrate their favorable pharmacokinetics for in vivo PET applications. This review summarizes the criteria of peptide-based PET probes design, the selection of radioisotopes, labeling methods, and provides an overview of the current status and trends in the development of target-specific peptide-based probes with respect to their unique PET imaging applications.

Current status and future perspectives of in vivo small animal imaging using radiolabeled nanoparticles

Small animal molecular imaging is a rapidly expanding efficient tool to study biological processes non-invasively. The use of radiolabeled tracers provides non-destructive, imaging information, allowing time related phenomena to be repeatedly studied in a single animal. In the last decade there has been an enormous progress in related technologies and a number of dedicated imaging systems overcome the limitations that the size of small animal possesses. On the other hand, nanoparticles (NPs) gain increased interest, due to their unique properties, which make them perfect candidates for biological applications. Over the past 5 years the two fields seem to cross more and more often; radiolabeled NPs have been assessed in numerous pre-clinical studies that range from oncology, till HIV treatment. In this article the current status in the tools, applications and trends of radiolabeled NPs reviewed.