Crystal structure of Bacillus stearothermophilus alpha-amylase: possible factors determining the thermostability

Engineering of a truncated alpha-amylase of Bacillus sp. strain TS-23 for the simultaneous improvement of thermal and oxidative stabilities

BACDeltaNC/Delta RS is a thermostable variant derived from the truncated alpha-amylase (BAC Delta NC) of alkaliphilic Bacillus sp. strain TS-23. With the aim of enhancing its resistance towards chemical oxidation, Met231 of BAC Delta NC/Delta RS was replaced by leucine to create BAC Delta NC/Delta RS/M231L. The functional significance of the 31 C-terminal residues of BAC Delta NC/Delta RS/M231L was also explored by site-directed mutagenesis of the 483 th codon in the gene to stop codon (TAA), thereon the engineered enzyme was named BAC Delta NC/Delta RS/M231L/Delta C31. BAC Delta NC/Delta RS/M231L and BAC Delta NC/Delta RS/M231L/Delta C31 were very similar to BAC Delta NC in terms of specific activity, kinetic parameters, pH-activity profile, and the hydrolysis of raw starch; however, the engineered enzymes showed an increased half-life at 70 degrees C. The intrinsic fluorescence and circular dichroism spectra were nearly identical for wild-type and engineered enzymes, but they exhibited a different sensitivity towards GdnHCl-induced denaturation. This implicates that the rigidity of the enzyme has been changed as the consequence of mutations. Performance of the engineered enzymes was evaluated in the presence of commonly used detergent compounds and some detergents from the local markets. A high compatibility and performance of both BAC Delta NC/Delta RS/M231L and BAC Delta NC/Delta RS/M231L/Delta C31 may be desirable for their practical uses in the detergent industry.

Enhancement of the alcoholytic activity of alpha-amylase AmyA from Thermotoga maritima MSB8 (DSM 3109) by site-directed mutagenesis

AmyA, an alpha-amylase from the hyperthermophilic bacterium Thermotoga maritima, is able to hydrolyze internal alpha-1,4-glycosidic bonds in various alpha-glucans at 85 degrees C as the optimal temperature. Like other glycoside hydrolases, AmyA also catalyzes transglycosylation reactions, particularly when oligosaccharides are used as substrates. It was found that when methanol or butanol was used as the nucleophile instead of water, AmyA was able to catalyze alcoholysis reactions. This capability has been evaluated in the past for some alpha-amylases, with the finding that only the saccharifying fungal amylases from Aspergillus niger and from Aspergillus oryzae present measurable alcoholysis activity (R. I. Santamaria, G. Del Rio, G. Saab, M. E. Rodriguez, X. Soberon, and A. Lopez, FEBS Lett. 452:346-350, 1999). In the present work, we found that AmyA generates larger quantities of alkyl glycosides than any amylase reported so far. In order to increase the alcoholytic activity observed in AmyA, several residues were identified and mutated based on previous analogous positions in amylases, defining the polarity and geometry of the active site. Replacement of residue His222 by glutamine generated an increase in the alkyl glucoside yield as a consequence of a higher alcoholysis/hydrolysis ratio. The same change in specificity was observed for the mutants H222E and H222D, but instability of these mutants toward alcohols decreased the yield of alkyl glucoside.

Site-directed mutagenesis of the calcium-binding site of alpha-amylase of Bacillus licheniformis

Amylases that are active under acidic conditions (pH <6), at higher temperatures (>70 degrees C) and have less reliance on Ca(2+) are required for starch hydrolysis. The alpha-amylase gene of Bacillus licheniformis MTCC 6598 was cloned and expressed in Escherichia coli BL21. The calcium-binding site spanning amino acid residues from 104 to 200 in the loop regions of domain B and D430 in domain C of amylase were changed by site-directed mutagenesis and the resultant mutant amylases were analyzed. Calcium-binding residues, N104, D161, D183, D200 and D430, were replaced with D104 and N161, N183, N200 and N430, respectively. Mutant amylase with N104D had a slightly decreased activity at 30 degrees C but a significantly improved specific activity at pH 5 and 70 degrees C, which is desirable character for a food enzyme. The amylase mutants with D183N or D200N lost all activity while the mutant amylase with D161N retained its activity at 30 degrees C but had significantly less activity at 70 degrees C. On the other hand, the activity of the mutant amylase with D430N was not changed at 30 degrees C but had an improved activity at 70 degrees C.

Thermostability enhancement and change in starch hydrolysis profile of the maltohexaose-forming amylase of Bacillus stearothermophilus US100 strain

The implications of Asn315 and Val450 in the atypical starch hydrolysis profile of Bacillus stearothermophilus Amy (a-amylase) US100 have been suggested previously [Ben Ali, Mhiri, Mezghani and Bejar (2001) Enzyme Microb. Tech. 28, 537-542]. In order to confirm this hypothesis, three mutants were generated. Of these two have a single mutation, N315D or V450G, whereas the third contains both mutations. Analysis of the starch breakdown-profile of these three mutants, as well as of the wild-type, allowed us to conclude that each single mutation induces a small variation in the hydrolysis product. However, the major end product produced by the double mutant shifts from maltopentaose/maltohexaose to maltose/maltotriose, confirming the involvement of these two residues in starch hydrolysis. The superimposition of AmyUS100 model with that of Bacillus licheniformis shows in AmyUS100 an additional loop containing residues Ile214 and Gly215. Remarkably, the deletion of these two residues increases the half-life at 100 degrees C from 15 min to approx. 70 min. Moreover, this engineered amylase requires less calcium, 25 p.p.m. instead of 100 p.p.m., to reach maximal thermostability.

Role of Trp140 at subsite -6 on the maltohexaose production of maltohexaose-producing amylase from alkalophilic Bacillus sp.707

Maltohexaose-producing amylase (G6-amylase) from alkalophilic Bacillus sp.707 predominantly produces maltohexaose (G6) in the yield of >30% of the total products from short-chain amylose (DP=17). Our previous crystallographic study showed that G6-amylase has nine subsites, from -6 to +3, and pointed out the importance of the indole moiety of Trp140 in G6 production. G6-amylase has very low levels of hydrolytic activities for oligosaccharides shorter than maltoheptaose. To elucidate the mechanism underlying G6 production, we determined the crystal structures of the G6-amylase complexes with G6 and maltopentaose (G5). In the active site of the G6-amylase/G5 complex, G5 is bound to subsites -6 to -2, while G1 and G6 are found at subsites +2 and -7 to -2, respectively, in the G6-amylase/G6 complex. In both structures, the glucosyl residue located at subsite -6 is stacked to the indole moiety of Trp140 within a distance of 4A. The measurement of the activities of the mutant enzymes when Trp140 was replaced by leucine (W140L) or by tyrosine (W140Y) showed that the G6 production from short-chain amylose by W140L is lower than that by W140Y or wild-type enzyme. The face-to-face short contact between Trp140 and substrate sugars is suggested to regulate the disposition of the glucosyl residue at subsite -6 and to govern product specificity for G6 production.

Secretion of heterologous proteins in Bacillus subtilis can be improved by engineering cell components affecting post-translocational protein folding and degradation

AIMS

To explore the potential to enhance secretion of heterologous proteins in Bacillus subtilis by engineering cell factors affecting extracytoplasmic protein folding and degradation.

METHODS AND RESULTS

Bottleneck components affecting the extracytoplasmic phase of protein secretion were genetically engineered and their effects on the secretion of 11 industrially interesting heterologous proteins were studied by Western blotting and enzymatic assays. Overproduction of PrsA lipoprotein enhanced the secretion of alpha-amylase of Bacillus stearothermophilus (fourfold) and pneumolysin (1.5-fold). Increasing the net negative charge of the cell wall because of lack of the d-alanine substitution of anionic cell wall polymers enhanced the secretion of pneumolysin c. 1.5-fold. Decreasing the level of HtrA-type quality control proteases caused harmful effects on growth and did not enhance secretion. Pertussis toxin subunit, S1 was found to be a substrate for HtrA-type proteases and its secretion was dependent on these proteases.

CONCLUSIONS

Secretion of heterologous proteins can be enhanced by engineering components involved in late stages of secretion in a protein-dependent manner.

SIGNIFICANCE AND IMPACT OF THE STUDY

The study revealed both possibilities and limitations of modulating the post-translocational phase of secretion as a means to improve the yield of heterologous proteins.

Secondary calcium-binding parameter of Bacillus amyloliquefaciens alpha-amylase obtained from inhibition kinetics

Calcium is required for the stabilization of alpha-amylase because of primary binding (essential binding), but has been shown to inhibit hydrolytic catalysis due to secondary binding at the catalytic site in the enzyme. The role of calcium in the hydrolysis of soluble amylose by Bacillus amyloliquefaciens alpha-amylase was characterized using the equilibrium dissociation constant (K(m)) and k(cat) for the hydrolytic catalysis. The enzymatic hydrolysis was inhibited by a relatively high concentration of calcium ions ([Ca2+] > or = 2.0 mM). The dissociation constant (Km) was increased with increasing calcium ion concentration. Because k(cat) was practically constant at the high calcium concentration range, a competitive inhibition kinetic model was applied to calculate the inhibition parameters in terms of the secondary calcium binding to the alpha-amylase. The enthalpy and entropy changes for the secondary binding were 54.8 kJ/mol and 215 J/mol.K, respectively, and these values suggest a strong entropic affinity for the bivalent ion binding to the enzyme. The thermodynamical analysis clearly shows the conformational changes in this a-amylase during the primary and secondary calcium ion binding.

Structural and mechanistic studies of chloride induced activation of human pancreatic alpha-amylase

The mechanism of allosteric activation of alpha-amylase by chloride has been studied through structural and kinetic experiments focusing on the chloride-dependent N298S variant of human pancreatic alpha-amylase (HPA) and a chloride-independent TAKA-amylase. Kinetic analysis of the HPA variant clearly demonstrates the pronounced activating effect of chloride ion binding on reaction rates and its effect on the pH-dependence of catalysis. Structural alterations observed in the N298S variant upon chloride ion binding suggest that the chloride ion plays a variety of roles that serve to promote catalysis. One of these is having a strong influence on the positioning of the acid/base catalyst residue E233. Absence of chloride ion results in multiple conformations for this residue and unexpected enzymatic products. Chloride ion and N298 also appear to stabilize a helical region of polypeptide chain from which projects the flexible substrate binding loop unique to chloride-dependent alpha-amylases. This structural feature also serves to properly orient the catalytically essential residue D300. Comparative analyses show that the chloride-independent alpha-amylases compensate for the absence of bound chloride by substituting a hydrophobic core, altering the manner in which substrate interactions are made and shifting the placement of N298. These evolutionary differences presumably arise in response to alternative operating environments or the advantage gained in a particular product profile. Attempts to engineer chloride-dependence into the chloride-independent TAKA-amylase point out the complexity of this system, and the fact that a multitude of factors play a role in binding chloride ion in the chloride-dependent alpha-amylases.

Structural features of thermozymes

Enzymes synthesized by thermophiles and hyperthermophiles are known as thermozymes. These enzymes are typically thermostable, or resistant to irreversible inactivation at high temperatures, and thermophilic, i.e. optimally active at elevated temperatures between 60 and 125 degrees C. Enzyme thermostability encompasses thermodynamic stability and kinetic stability. Thermodynamic stability is defined by the enzyme's free energy of stabilization (deltaG(stab)) and by its melting temperature (Tm). An enzyme's kinetic stability is often expressed as its halflife (t1/2) at defined temperature. DeltaG(stab) of thermophilic proteins is 5-20 kcal/mol higher than that of mesophilic proteins. The thermostability mechanisms for thermozymes are varied and depend on the enzyme; nevertheless, some common features can be identified as contributing to stability. These features include more interactions (i.e. hydrogen bonds, electrostatic interactions, hydrophobic interactions, disulfide bonds, metal binding) than in less stable enzymes and superior conformational structure (i.e. more rigid, higher packing efficiency, reduced entropy of unfolding, conformational strain release and stability of alpha-helix). Understanding of the stabilizing features will greatly facilitate reengineering of some of the mesozymes to more stable thermozymes.

Differential scanning calorimetric studies of a Bacillus halodurans α-amylase

The thermal unfolding of Amy 34, a recombinant alpha-amylase from Bacillus halodurans, has been investigated using differential scanning calorimetry (DSC). The denaturation of Amy 34 involves irreversible processes with an apparent denaturation temperature (T(m)) of 70.8 degrees C at pH 9.0, with four transitions, as determined using multiple Gaussian curves. The T(m) increased by 5 degrees C in the presence of 100-fold molar excess of CaCl2 while the aggregation of Amy 34 was observed in the presence of 1000-fold molar excess of CaCl2. Increase in the calcium ion concentration from 1- to 5-fold molar excess resulted in an increase in calorimetric enthalpy (DeltaH(cal)), however, at higher concentrations of CaCl2 (up to 100-fold), DeltaH(cal) was found to decrease, accompanied by a decrease in entropy change (DeltaS), while the T(m) steadily increased. The presence of 100-fold excess of metal chelator, EDTA, resulted in a decrease in T(m) by 10.4 degrees C. T(m) was also decreased to 61.1 degrees C and 65.9 degrees C at pH 6.0 and pH 11.0, respectively.

Biochemical and crystallographic analyses of maltohexaose-producing amylase from alkalophilic Bacillus sp. 707

Maltohexaose-producing amylase, called G6-amylase (EC 3.2.1.98), from alkalophilic Bacillus sp.707 predominantly produces maltohexaose (G6) from starch and related alpha-1,4-glucans. To elucidate the reaction mechanism of G6-amylase, the enzyme activities were evaluated and crystal structures were determined for the native enzyme and its complex with pseudo-maltononaose at 2.1 and 1.9 A resolutions, respectively. The optimal condition for starch-degrading reaction activity was found at 45 degrees C and pH 8.8, and the enzyme produced G6 in a yield of more than 30% of the total products from short-chain amylose (DP = 17). The crystal structures revealed that Asp236 is a nucleophilic catalyst and Glu266 is a proton donor/acceptor. Pseudo-maltononaose occupies subsites -6 to +3 and induces the conformational change of Glu266 and Asp333 to form a salt linkage with the N-glycosidic amino group and a hydrogen bond with secondary hydroxyl groups of the cyclitol residue bound to subsite -1, respectively. The indole moiety of Trp140 is stacked on the cyclitol and 4-amino-6-deoxyglucose residues located at subsites -6 and -5 within a 4 A distance. Such a face-to-face short contact may regulate the disposition of the glucosyl residue at subsite -6 and would govern the product specificity for G6 production.

Enzymatic analysis of an amylolytic enzyme from the hyperthermophilic archaeon Pyrococcus furiosus reveals its novel catalytic properties as both an alpha-amylase and a cyclodextrin-hydrolyzing enzyme

Genomic analysis of the hyperthermophilic archaeon Pyrococcus furiosus revealed the presence of an open reading frame (ORF PF1939) similar to the enzymes in glycoside hydrolase family 13. This amylolytic enzyme, designated PFTA (Pyrococcus furiosus thermostable amylase), was cloned and expressed in Escherichia coli. The recombinant PFTA was extremely thermostable, with an optimum temperature of 90 degrees C. The substrate specificity of PFTA suggests that it possesses characteristics of both alpha-amylase and cyclodextrin-hydrolyzing enzyme. Like typical alpha-amylases, PFTA hydrolyzed maltooligosaccharides and starch to produce mainly maltotriose and maltotetraose. However, it could also attack and degrade pullulan and beta-cyclodextrin, which are resistant to alpha-amylase, to primarily produce panose and maltoheptaose, respectively. Furthermore, acarbose, a potent alpha-amylase inhibitor, was drastically degraded by PFTA, as is typical of cyclodextrin-hydrolyzing enzymes. These results confirm that PFTA possesses novel catalytic properties characteristic of both alpha-amylase and cyclodextrin-hydrolyzing enzyme.

Adaptation of Class-13 α-Amylases to Diverse Living Conditions

There are currently 35 available nonredundant molecular structures of class-13 alpha-amylases (EC 3.2.1.1), mostly from microbial organisms living under a wide range of environmental conditions. One of the most recent additions has been the first alpha-amylase structure of a hyperthermophilic archaeon [Linden et al., J. Biol. Chem. 2003, 278, 9875-9884]. The structure has been used for comparative analyses with a representative set of three alpha-amylases from thermophilic, mesophilic and psychrophilic sources to identify molecular parameters for environmental adaptation. Our analysis supports generally observed trends such as an increase in structural compactness as well as an increase in salt bridges in order to cope with high-temperature conditions. The two representative thermophilic structures used in this comparative study have independently evolved di-metal centres--not present in the mesophilic and psychrophilic structures--in the vicinity of the active site. These observations may provide impetus for the design of alpha-amylases with improved molecular properties to enhance their utility in biotechnological processes.

Development characterization and use of a high-performance enzymatic time-temperature integrator for the control of sterilization process' impacts

A small sized single-component enzymatic time temperature integrator (TTI) was developed. It consisted of glass beads coated with Bacillus licheniformis alpha-amylase (BLA) and stabilizing additives in a dehydrated form. Post heating residual enzymatic activity was used as a response property of the TTI. Under isothermal conditions, different batches of the system were characterized by z(TTI)-values around 13.5 degrees C in the temperature range 100-130 degrees C as well as by their ability to provide a response within 5 min after thermal processing. When used under non-isothermal conditions in a model food (silicone spheres), the system allowed to measure process-values (zTTI)F(121.1 degrees C) up to 60 min with an average error of 10.9%. The capabilities of the system were validated in a real solid/liquid food matrix sterilized by retorting. The combination of F(TTI)-values with heat transfer simulations based on finite difference calculations allowed for the determination of process values, which evaluated actual process-values (10 degrees C)F(121.1 degrees C) up to 90 min with an average error of 11.4%. The good performances of the system as well as its easiness of preparation and use, make the latter a valuable biological device for thermal process assessment.

A proposed mechanism for the thermal denaturation of a recombinant Bacillus halmapalus α-amylase—the effect of calcium ions

The thermal stability of a recombinant alpha-amylase from Bacillus halmapalus alpha-amylase (BHA) has been investigated using circular dichroism spectroscopy (CD) and differential scanning calorimetry (DSC). This alpha-amylase is homologous to other Bacillus alpha-amylases where crystallographic studies have identified the existence of three calcium binding sites in the structure. Denaturation of BHA is irreversible with a T(m) of approximately 89 degrees C and DSC thermograms can be described using a one-step irreversible model. A 5 degrees C increase in T(m) in the presence of 10-fold excess CaCl(2) was observed. However, a concomitant increase in the tendency to aggregate was also observed. The presence of 30-40-fold excess calcium chelator (ethylenediaminetetraacetic acid (EDTA) or ethylene glycol-bis[beta-aminoethyl ether] N,N,N',N'-tetraacetic acid (EGTA)) results in a large destabilization of BHA, corresponding to about 40 degrees C lower T(m) as determined by both CD and DSC. Ten-fold excess EGTA reveals complex DSC thermograms corresponding to both reversible and irreversible transitions, which probably originate from different populations of BHA/calcium complexes. Combined interpretation of these observations and structural information on homologous alpha-amylases forms the basis for a suggested mechanism underlying the inactivation mechanism of BHA. The mechanism includes irreversible thermal denaturation of different BHA/calcium complexes and the calcium binding equilibria. Furthermore, the model accounts for a temperature-induced reversible structural change associated with calcium binding.

The structure of barley alpha-amylase isozyme 1 reveals a novel role of domain C in substrate recognition and binding: a pair of sugar tongs

Though the three-dimensional structures of barley alpha-amylase isozymes AMY1 and AMY2 are very similar, they differ remarkably from each other in their affinity for Ca(2+) and when interacting with substrate analogs. A surface site recognizing maltooligosaccharides, not earlier reported for other alpha-amylases and probably associated with the different activity of AMY1 and AMY2 toward starch granules, has been identified. It is located in the C-terminal part of the enzyme and, thus, highlights a potential role of domain C. In order to scrutinize the possible biological significance of this domain in alpha-amylases, a thorough comparison of their three-dimensional structures was conducted. An additional role for an earlier-identified starch granule binding surface site is proposed, and a new calcium ion is reported.

Hyperthermostabilization of Bacillus licheniformis alpha-amylase and modulation of its stability over a 50 degrees C temperature range

Bacillus licheniformis alpha-amylase (BLA) is a highly thermostable starch-degrading enzyme that has been extensively studied in both academic and industrial laboratories. For over a decade, we have investigated BLA thermal properties and identified amino acid substitutions that significantly increase or decrease the thermostability. This paper describes the cumulative effect of some of the most beneficial point mutations identified in BLA. Remarkably, the Q264S-N265Y double mutation led to a rather limited gain in stability but significantly improved the amylolytic function. The most hyperthermostable variants combined seven amino acid substitutions and inactivated over 100 times more slowly and at temperatures up to 23 degrees C higher than the wild-type enzyme. In addition, two highly destabilizing mutations were introduced in the metal binding site and resulted in a decrease of 25 degrees C in the half-inactivation temperature of the double mutant enzyme compared with wild-type. These mutational effects were analysed by protein modelling based on the recently determined crystal structure of a hyperthermostable BLA variant. Our engineering work on BLA shows that the thermostability of an already naturally highly thermostable enzyme can be substantially improved and modulated over a temperature range of 50 degrees C through a few point mutations.

Improving the thermostability of raw-starch-digesting amylase from a Cytophaga sp. by site-directed mutagenesis

A heat-stable raw-starch-digesting amylase (RSDA) was generated through PCR-based site-directed mutagenesis. At 65 degrees C, the half-life of this mutant RSDA, which, compared with the wild-type RSDA, lacks amino acids R178 and G179, was increased 20-fold. While the wild type was inactivated completely at pH 3.0, the mutant RSDA still retained 41% of its enzymatic activity. The enhancement of RSDA thermostability was demonstrated to be via a Ca(2+)-independent mechanism.

Kinetic stabilization of Bacillus licheniformis alpha-amylase through introduction of hydrophobic residues at the surface

It is generally assumed that in proteins hydrophobic residues are not favorable at solvent-exposed sites, and that amino acid substitutions on the surface have little effect on protein thermostability. Contrary to these assumptions, we have identified hyperthermostable variants of Bacillus licheniformis alpha-amylase (BLA) that result from the incorporation of hydrophobic residues at the surface. Under highly destabilizing conditions, a variant combining five stabilizing mutations unfolds 32 times more slowly and at a temperature 13 degrees C higher than the wild-type. Crystal structure analysis at 1.7 A resolution suggests that stabilization is achieved through (a) extension of the concept of increased hydrophobic packing, usually applied to cavities, to surface indentations, (b) introduction of favorable aromatic-aromatic interactions on the surface, (c) specific stabilization of intrinsic metal binding sites, and (d) stabilization of a beta-sheet by introducing a residue with high beta-sheet forming propensity. All mutated residues are involved in forming complex, cooperative interaction networks that extend from the interior of the protein to its surface and which may therefore constitute "weak points" where BLA unfolding is initiated. This might explain the unexpectedly large effect induced by some of the substitutions on the kinetic stability of BLA. Our study shows that substantial protein stabilization can be achieved by stabilizing surface positions that participate in underlying cooperatively formed substructures. At such positions, even the apparently thermodynamically unfavorable introduction of hydrophobic residues should be explored.

Relation between domain evolution, specificity, and taxonomy of the alpha-amylase family members containing a C-terminal starch-binding domain

The alpha-amylase family (glycoside hydrolase family 13; GH 13) contains enzymes with approximately 30 specificities. Six types of enzyme from the family can possess a C-terminal starch-binding domain (SBD): alpha-amylase, maltotetraohydrolase, maltopentaohydrolase, maltogenic alpha-amylase, acarviose transferase, and cyclodextrin glucanotransferase (CGTase). Such enzymes are multidomain proteins and those that contain an SBD consist of four or five domains, the former enzymes being mainly hydrolases and the latter mainly transglycosidases. The individual domains are labelled A [the catalytic (beta/alpha)8-barrel], B, C, D and E (SBD), but D is lacking from the four-domain enzymes. Evolutionary trees were constructed for domains A, B, C and E and compared with the 'complete-sequence tree'. The trees for domains A and B and the complete-sequence tree were very similar and contain two main groups of enzymes, an amylase group and a CGTase group. The tree for domain C changed substantially, the separation between the amylase and CGTase groups being shortened, and a new border line being suggested to include the Klebsiella and Nostoc CGTases (both four-domain proteins) with the four-domain amylases. In the 'SBD tree' the border between hydrolases (mainly alpha-amylases) and transglycosidases (principally CGTases) was not readily defined, because maltogenic alpha-amylase, acarviose transferase, and the archaeal CGTase clustered together at a distance from the main CGTase cluster. Moreover the four-domain CGTases were rooted in the amylase group, reflecting sequence relationships for the SBD. It appears that with respect to the SBD, evolution in GH 13 shows a transition in the segment of the proteins C-terminal to the catalytic (beta/alpha)8-barrel(domain A).