Femtosecond-tunable measurement of electron thermalization in gold

Radiative Relaxation of Gold Nanorods Coated with Mesoporous Silica with Different Porosities upon Nanosecond Photoexcitation Monitored by Time-Resolved Infrared Emission Spectroscopy

Gold nanorods (AuNRs) have been widely used in photothermal conversion, and a coating of silica (SiO₂) provides higher thermal stability, better biocompatibility, and versatile chemical functionalization. In this work, two gold nanorods coated with surfactant-templated mesoporous silica layers of the same thickness but different porosities, and thus different specific surface areas, were prepared. Upon irradiation with 1064 nm nanosecond pulsed laser, the transient infrared emissions of AuNR@SiO₂ enveloped the stretching mode of the Si-O-Si bridge (1000-1250 cm^-1), the bending mode of adsorbed H₂O (1600-1650 cm^-1) within the mesoporous silica layer, and blackbody radiation, in terms of an underlying broad band (1000-2000 cm^-1) probed with a step-scan Fourier transform spectrometer. The mesoporous silica shell and the adsorbed H₂O gained populations of their vibrationally excited states, and the whole AuNR@SiO₂ was heated up via the photothermal energy of the core AuNRs. An average temperature after 5-10 μs within 80% of the emission intensity was ca. 200 °C. The decay of the emission at 1000-1250 and 1500-1750 cm^-1 was both accelerated, and the blackbody radiation components were negatively correlated with the porosity of the mesoporous silica layer. Higher porosity of the mesoporous silica layer was associated with more effective depopulation of the vibrationally excited states of the silica layers on the AuNRs via the nonradiative thermal conduction of the adsorbed H₂O, since H₂O has a larger thermal conduction coefficient than that of silica, in concomitance with the accelerated emission kinetics. This work unveils the roles of the porosity, capping materials, and entrapping molecules of a core-shell nanostructure during the thermalization after photoexcitation.

Ultrafast laser-induced strain waves in thin ruthenium layers

We report on the time-dependent optical diffraction from ultra-high frequency laser-induced acoustic waves in thin layers of ruthenium deposited on glass substrates. We show that the thermo-optic and strain-optic effects dominate the optical response of Ru layers to a traveling longitudinal strain wave. In addition, we show the generation and detection of acoustic waves with a central frequency ranging from 130 GHz to 750 GHz on ultra-thin layers with thicknesses in the range of 1.2 - 20 nm. For these ultra-thin layers we measure a strong dependency of the speed of sound on the layer thickness and, thus, the frequency. This frequency-dependent speed of sound results in a frequency-dependent acoustic impedance mismatch between the ruthenium and the glass substrate, leading to a faster decay of the measured signals for increasing frequency. Furthermore, for these extremely high-frequency oscillations, we find that the frequency and phase remain constant for times longer than about 2 ps after optical excitation. Back extrapolation of the acquired acoustic signals to t = 0 gives a starting phase of -π/2. As this seems unlikely, we interpret this as an indication of possible dynamic changes in the phase/frequency of the acoustic wave in the first 2 ps after excitation.

Electron Kinetics Induced by Ultrafast Photoexcitation of Warm Dense Matter in a 30-nm-Thick Foil

We report on the study of electron kinetics induced by intense femtosecond (fs) laser excitation of electrons in the 5d band of Au. Changes in the electron system are observed from the temporal evolution of ac conductivity and conduction electron density. The results reveal an increase of electron thermalization time with excitation energy density, contrary to the Fermi-liquid behavior of the decrease of thermalization time associated with the heating of conduction electrons. This is attributed to the severe mitigation of photoexcitation by Auger decay. The study also uncovers the shortening of 5d hole lifetime with the increase of photoexcitation rates. These unique findings provide valuable insights for understanding electron kinetics under extreme nonequilibrium conditions.

Robustness and accuracy improvement of data processing with 2D neural networks for transient absorption dynamics

To achieve the goal of efficiently analyzing transient absorption spectra without arbitrary assumption and to overcome the limitations of conventional methods in fitting ability and highly noised backgrounds, it is essential to develop new tools to achieve more accurate and robust prediction based on the intrinsic properties of a spectrum even under strong noise. In this work, Lasso regression and neural network were combined to achieve an effective fitting. Compared to the conventional global fitting method, our network could automatically determine the exponential form on each wave unit, in which the accuracy was as high as 97%. Thereafter, the lifetime with the corresponding amplitude ratio could be easily predicted by the neural network on each wave unit. This kind of prediction is difficult to achieve by global fitting due to the limitation of computational resources. Furthermore, more accurate fitting even under weak signals could be achieved for the mean square error (MSE) decreasing by more than 100 times on average compared to conventional global fitting methods. Attributed to its improved accuracy and robustness, our developed algorithm could be readily applied to analyze time-resolved transient spectra.

Quantitative Ultrafast Electron-Temperature Dynamics in Photo-Excited Au Nanoparticles

The femtosecond evolution of the electronic temperature of laser-excited gold nanoparticles is measured, by means of ultrafast time-resolved photoemission spectroscopy induced by extreme-ultraviolet radiation pulses. The temperature of the electron gas is deduced by recording and fitting high-resolution photo emission spectra around the Fermi edge of gold nanoparticles providing a direct, unambiguous picture of the ultrafast electron-gas dynamics. These results will be instrumental to the refinement of existing models of femtosecond processes in laterally-confined and bulk condensed-matter systems, and for understanding more deeply the role of hot electrons in technological applications.

Hot carriers in graphene - fundamentals and applications

Hot charge carriers in graphene exhibit fascinating physical phenomena, whose understanding has improved greatly over the past decade. They have distinctly different physical properties compared to, for example, hot carriers in conventional metals. This is predominantly the result of graphene's linear energy-momentum dispersion, its phonon properties, its all-interface character, and the tunability of its carrier density down to very small values, and from electron- to hole-doping. Since a few years, we have witnessed an increasing interest in technological applications enabled by hot carriers in graphene. Of particular interest are optical and optoelectronic applications, where hot carriers are used to detect (photodetection), convert (nonlinear photonics), or emit (luminescence) light. Graphene-enabled systems in these application areas could find widespread use and have a disruptive impact, for example in the field of data communication, high-frequency electronics, and industrial quality control. The aim of this review is to provide an overview of the most relevant physics and working principles that are relevant for applications exploiting hot carriers in graphene.

Ultrashort single-pulse laser ablation of stainless steel, aluminium, copper and its dependence on the pulse duration

In this work, we investigate single-pulse laser ablation of bulk stainless steel (AISI304), aluminium (Al) and copper (Cu) and its dependence on the pulse duration. We measured the reflectivity, ablation thresholds and volumes under the variation of pulse duration and fluence. The known drop of efficiency with increasing pulse duration is confirmed for single-pulse ablation in all three metals. We attribute the efficiency drop to a weakened photomechanically driven ablation process and a stronger contribution of photothermal phase explosion. The highest energetic efficiency and precision is achieved for pulse durations below the mechanical expansion time of 3-5 ps, where the stress confinement condition is fulfilled.

Current Progress in Femtosecond Laser Ablation/Ionisation Time-of-Flight Mass Spectrometry

The last decade witnessed considerable progress in the development of laser ablation/ionisation time-of-flight mass spectrometry (LI-TOFMS). The improvement of both the laser ablation ion sources employing femtosecond lasers and the method of ion coupling with the mass analyser led to highly sensitive element and isotope measurements, minimisation of matrix effects, and reduction of various fractionation effects. This improvement of instrumental performance can be attributed to the progress in laser technology and accompanying commercialisation of fs-laser systems, as well as the availability of fast electronics and data acquisition systems. Application of femtosecond laser radiation to ablate the sample causes negligible thermal effects, which in turn allows for improved resolution of chemical surface imaging and depth profiling. Following in the footsteps of its predecessor ns-LIMS, fs-LIMS, which employs fs-laser ablation ion sources, has been developed in the last two decades as an important method of chemical analysis and will continue to improve its performance in subsequent decades. This review discusses the background of fs-laser ablation, overviews the most relevant instrumentation and emphasises their performance figures, and summarizes the studies on several applications, including geochemical, semiconductor, and bio-relevant materials. Improving the chemical analysis is expected by the implementation of laser pulse sequences or pulse shaping methods and shorter laser wavelengths providing current progress in mass resolution achieved in fs-LIMS. In parallel, advancing the methods of data analysis has the potential of making this technique very attractive for 3D chemical analysis with micrometre lateral and sub-micrometre vertical resolution.

Ultrafast Carrier and Lattice Dynamics in Plasmonic Nanocrystalline Copper Sulfide Films

Excited carrier dynamics in plasmonic nanostructures determines many important optical properties such as nonlinear optical response and photocatalytic activity. Here it is shown that mesoscopic plasmonic covellite nanocrystals with low free-carrier concentration exhibit a much faster carrier relaxation than in traditional plasmonic materials. A nonequilibrium hot-carrier population thermalizes within first 20 fs after photoexcitation. A decreased thermalization time in nanocrystals compared to a bulk covellite is consistent with the reduced Coulomb screening in ultrathin films. The subsequent relaxation of thermalized, equilibrium electron gas is faster than in traditional plasmonic metals due to the lower carrier concentration and agrees well with that in a bulk covellite showing no evidence of quantum confinement or hot-hole trapping at the surface states. The excitation of coherent optical phonon modes in a covellite is also demonstrated, revealing coherent lattice dynamics in plasmonic materials, which until now was mainly limited to dielectrics, semiconductors, and semimetals. These findings show advantages of this new mesoscopic plasmonic material for active control of optical processes.

Hot carrier-mediated avalanche multiphoton photoluminescence from coupled Au-Al nanoantennas

Avalanche multiphoton photoluminescence (AMPL) is observed from coupled Au-Al nanoantennas under intense laser pumping, which shows more than one order of magnitude emission intensity enhancement and distinct spectral features compared with ordinary metallic photoluminescence. The experiments are conducted by altering the incident laser intensity and polarization using a home-built scanning confocal optical microscope. The results show that AMPL originates from the recombination of avalanche hot carriers that are seeded by multiphoton ionization. Notably, at the excitation stage, multiphoton ionization is shown to be assisted by the local electromagnetic field enhancement produced by coupled plasmonic modes. At the emission step, the giant AMPL intensity can be evaluated as a function of the local field environment and the thermal factor for hot carriers, in accordance with a linear relationship between the power law exponent coefficient and the emitted photon energy. The dramatic change in the spectral profile is explained by spectral linewidth broadening mechanisms. This study offers nanospectroscopic evidence of both the potential optical damages for plasmonic nanostructures and the underlying physical nature of light-matter interactions under a strong laser field; it illustrates the significance of the emerging topics of plasmonic-enhanced spectroscopy and laser-induced breakdown spectroscopy.

Plasmonic metal nanostructures: concepts, challenges and opportunities in photo-mediated chemical transformations

Plasmonic metal nanostructures (PMNs) are characterized by the plasmon oscillation of conduction band electron in response to external radiation, enabling strong light absorption and scattering capacities and near-field amplification. Owing to these enhanced light-matter interactions, PMNs have garnered extensive research interest in the past decades. Notably, a growingly large number of reports show that the energetics and kinetics of chemical transformations on PMNs can be modified upon photoexcitation of their plasmons, giving rise to a new paradigm of manipulating the reaction rate and selectivity of chemical reactions. On the other hand, there is urgent need to achieve clear understanding of the mechanism underlying the photo-mediated chemical transformations on PMNs for unleashing their full potential in converting solar energy to chemicals. In this perspective, we review current fundamental concepts of photo-mediated chemical transformations executed at PMNs. Three pivotal mechanistic questions, i.e., thermal and nonthermal effects, direct and indirect charge transfer processes, and the specific impacts of plasmon-induced potentials, are explored based on recent studies. We highlight the critical aspects in which major advancements should be made to facilitate the rational design and optimization of photo-mediated chemical transformations on PMNs in the future.

All-Optically Reconfigurable Plasmonic Metagrating for Ultrafast Diffraction Management

Hot-electron dynamics taking place in nanostructured materials upon irradiation with fs-laser pulses has been the subject of intensive research, leading to the emerging field of ultrafast nanophotonics. However, the most common description of nonlinear interaction with ultrashort laser pulses assumes a homogeneous spatial distribution for the photogenerated carriers. Here we theoretically show that the inhomogeneous evolution of the hot carriers at the nanoscale can disclose unprecedented opportunities for ultrafast diffraction management. In particular, we design a highly symmetric plasmonic metagrating capable of a transient symmetry breaking driven by hot electrons. The subsequent power imbalance between symmetrical diffraction orders is calculated to exceed 20% under moderate (∼2 mJ/cm²) laser fluence. Our theoretical investigation also indicates that the recovery time of the symmetric configuration can be controlled by tuning the geometry of the metaatom, and can be as fast as 2 ps for electrically connected configurations.

Prospects of Coupled Organic-Inorganic Nanostructures for Charge and Energy Transfer Applications

We review the field of organic-inorganic nanocomposites with a focus on materials that exhibit a significant degree of electronic coupling across the hybrid interface. These nanocomposites undergo a variety of charge and energy transfer processes, enabling optoelectronic applications in devices which exploit singlet fission, triplet energy harvesting, photon upconversion or hot charge carrier transfer. We discuss the physical chemistry of the most common organic and inorganic components. Based on those we derive synthesis and assembly strategies and design criteria on material and device level with a focus on photovoltaics, spin memories or optical upconverters. We conclude that future research in the field should be directed towards an improved understanding of the binding motif and molecular orientation at the hybrid interface.

Influence of non-equilibrium electron dynamics on photoluminescence of metallic nanostructures

A microscopic model is still strongly needed to understand the intrinsic photoluminescence (iPL) of metallic nanostructures. In this paper, a phenomenological model concerning the electron dynamics at the excited states, including the electron-phonon (e-p) and electron-electron (e-e) interactions, is developed. This model shows that the dynamics of non-equilibrium electrons at the excited states influence the iPL features significantly. Two main aspects determine the iPL process of metallic nanostructures: the photonic density of states relating to the Purcell effect caused by the surface plasmon resonances, and the electrons transition factor. This model takes into account the contribution of the e-p and e-e interactions to the dynamic electron distribution. The decay process of the non-thermal electrons at the excited states helps understanding most of the iPL features of metallic nanostructures. The calculated and experimental results coincide well regarding the spectral shape, temperature-dependent anti-Stokes emission, and nonlinear behaviors, and time-resolved spectra. The results presented in this paper provide a concise, intuitive, and comprehensive understanding of the iPL of metallic nanostructures.

Laser-induced anisotropy of electronic pressure and excitation of edge currents inside metal

We show theoretically that anisotropy of the electronic distribution function inside the laser-irradiated metal leads to the formation of edge currents at the timescale of distribution isotropization. When the electronic pressure in the skin layer is anisotropic, the pressure gradient appears to be non-potential force producing a low-frequency magnetic field. In the case of femtosecond laser pumping, the estimated internal magnetic field reaches magnitude up to 1 T even in the non-damaging interaction regime. We demonstrate that this field is localized inside the metal, while just a minor part of its energy is radiated into free space as a sub-terahertz signal.

Ultra-short photoacoustic pulse generation through hot electron pressure in two-dimensional electron gas

Launching ultrashort femtosecond photoacoustic pulses with multi-terahertz bandwidth will find broad applications from fundamental acoustics in 2D materials and THz-acoustic and phonon spectroscopy to nondestructive detection in opaque materials with a sub-nanometer resolution. Here we report the generation of ultra-short 344 fs photoacoustic pulses with a 2.1 THz bandwidth from interfacial two-dimensional electron gas using optical femtosecond excitation. A comparison with simulation supports the dominant contribution of hot electron pressure and the ultrafast electron relaxation to produce pulsewidth shorter than the acoustic transit time across the electron wavefunction. Our simulation further indicates the possibility to generate <200 fs photoacoustic pulse.

Control of hot-carrier relaxation time in Au-Ag thin films through alloying

The plasmon resonance of a structure is primarily dictated by its optical properties and geometry, which can be modified to enable hot-carrier photodetectors with superior performance. Recently, metal alloys have played a prominent role in tuning the resonance of plasmonic structures through chemical composition engineering. However, it has been unclear how alloying modifies the time dynamics of the generated hot-carriers. In this work, we elucidate the role of chemical composition on the relaxation time of hot-carriers for the archetypal Au_xAg_1-x thin film system. Through time-resolved optical spectroscopy measurements in the visible wavelength range, we measure composition-dependent relaxation times that vary up to 8× for constant pump fluency. Surprisingly, we find that the addition of 2% of Ag into Au films can increase the hot-carrier lifetime by approximately 35% under fixed fluence, as a result of a decrease in optical loss. Further, the relaxation time is found to be inversely proportional to the imaginary part of the permittivity. Our results indicate that alloying is a promising approach to effectively control hot-carrier relaxation time in metals.

Resolving Electron-Electron Scattering in Plasmonic Nanorod Ensembles Using Two-Dimensional Electronic Spectroscopy

The use of two-dimensional electronic spectroscopy (2DES) to study electron-electron scattering dynamics in plasmonic gold nanorods is described. The 2DES resolved the time-dependent plasmon homogeneous line width Γ_h(t), which was sensitive to changes in Fermi-level carrier densities. This approach was effective because electronic excitation accelerated plasmon dephasing, which broadened Γ_h. Analysis of Γ_h(t) indicated plasmon coherence times were decreased by 20-50%, depending on excitation conditions. Electron-electron scattering rates of approximately 0.01 fs^-1 were obtained by fitting the time-dependent Γ_h broadening; rates increased quadratically with both excitation pulse energy and frequency. This rate dependence agreed with Fermi-liquid theory-based predictions. Hot electron thermalization through electron-phonon scattering resulted in Γ_h narrowing. To our knowledge, this is the first use of the plasmon Γ_h(t) to isolate electron-electron scattering dynamics in colloidal metal nanoparticles. These results illustrate the effectiveness of 2DES for studying hot electron dynamics of solution-phase plasmonic ensembles.

Optical and mechanical properties of streptavidin-conjugated gold nanospheres through data mining techniques

The thermo-mechanical properties of streptavidin-conjugated gold nanospheres, adhered to a surface via complex molecular chains, are investigated by two-color infrared asynchronous optical sampling pump-probe spectroscopy. Nanospheres with different surface densities have been deposited and exposed to a plasma treatment to modify their polymer binding chains. The aim is to monitor their optical response in complex chemical environments that may be experienced in, e.g., photothermal therapy or drug delivery applications. By applying unsupervised learning techniques to the spectroscopic traces, we identify their thermo-mechanical response variation. This variation discriminates nanospheres in different chemical environments or different surface densities. Such discrimination is not evident based on a standard analysis of the spectroscopic traces. This kind of analysis is important, given the widespread application of conjugated gold nanospheres in medicine and biology.

Effective Electron Temperature Measurement Using Time-Resolved Anti-Stokes Photoluminescence

Anti-Stokes photoluminescence of metal nanoparticles, in which emitted photons have a higher energy than the incident photons, is an indicator of the temperature prevalent within a nanoparticle. Previous work has shown how to extract the temperature from a gold nanoparticle under continuous-wave monochromatic illumination. We extend the technique to pulsed illumination and introduce pump-probe anti-Stokes spectroscopy. This new technique enables us not only to measure an effective electron temperature in a gold nanoparticle (∼103 K under our conditions), but also to measure ultrafast dynamics of a pulse-excited electron population, through its effect on the photoluminescence, with subpicosecond time resolution. We measure the heating and cooling, all within picoseconds, of the electrons and find that, with our subpicosecond pulses, the highest apparent temperature is reached 0.6 ps before the maximum change in magnitude of the extinction signal.

A Noble-Transition Alloy Excels at Hot-Carrier Generation in the Near Infrared

Above-equilibrium "hot"-carrier generation in metals is a promising route to convert photons into electrical charge for efficient near-infrared optoelectronics. However, metals that offer both hot-carrier generation in the near-infrared and sufficient carrier lifetimes remain elusive. Alloys can offer emergent properties and new design strategies compared to pure metals. Here, it is shown that a noble-transition alloy, Au_x Pd_{1- x} , outperforms its constituent metals concerning generation and lifetime of hot carriers when excited in the near-infrared. At optical fiber wavelengths (e.g., 1550 nm), Au₅₀ Pd₅₀ provides a 20-fold increase in the number of ≈0.8 eV hot holes, compared to Au, and a threefold increase in the carrier lifetime, compared to Pd. The discovery that noble-transition alloys can excel at hot-carrier generation reveals a new material platform for near-infrared optoelectronic devices.

Critical Coupling of Visible Light Extends Hot-Electron Lifetimes for H2O2 Synthesis

Devices driven by above-equilibrium "hot" electrons are appealing for photocatalytic technologies, such as in situ H2O2 synthesis, but currently suffer from low (<1%) overall quantum efficiencies. Gold nanostructures excited by visible light generate hot electrons that can inject into a neighboring semiconductor to drive electrochemical reactions. Here, we designed and studied a metal-insulator-metal (MIM) structure of Au nanoparticles on a ZnO/TiO2/Al film stack, deposited through room-temperature, lithography-free methods. Light absorption, electron injection efficiency, and photocatalytic yield in this device are superior in comparison to the same stack without Al. Our device absorbs >60% of light at the Au localized surface plasmon resonance (LSPR) peak near 530 nm-a 5-fold enhancement in Au absorption due to critical coupling to an Al film. Furthermore, we show through ultrafast pump-probe spectroscopy that the Al-coupled samples exhibit a nearly 5-fold improvement in hot-electron injection efficiency as compared to a non-Al device, with the hot-electron lifetimes extending to >2 ps in devices photoexcited with fluence of 0.1 mJ cm-2. The use of an Al film also enhances the photocatalytic yield of H2O2 more than 3-fold in a visible-light-driven reactor. Altogether, we show that the critical coupling of Al films to Au nanoparticles is a low-cost, lithography-free method for improving visible-light capture, extending hot-carrier lifetimes, and ultimately increasing the rate of in situ H2O2 generation.

Role of non-thermal electrons in ultrafast spin dynamics of ferromagnetic multilayer

Understanding of ultrafast spin dynamics is crucial for future spintronic applications. In particular, the role of non-thermal electrons needs further investigation in order to gain a fundamental understanding of photoinduced demagnetization and remagnetization on a femtosecond time scale. We experimentally demonstrate that non-thermal electrons existing in the very early phase of the photoinduced demagnetization process play a key role in governing the overall ultrafast spin dynamics behavior. We simultaneously measured the time-resolved reflectivity (TR-R) and the magneto-optical Kerr effect (TR-MOKE) for a Co/Pt multilayer film. By using an extended three-temperature model (E3TM), the quantitative analysis, including non-thermal electron energy transfer into the subsystem (thermal electron, lattice, and spin), reveals that energy flow from non-thermal electrons plays a decisive role in determining the type I and II photoinduced spin dynamics behavior. Our finding proposes a new mechanism for understanding ultrafast remagnetization dynamics.

Femtosecond time-resolved pump-probe measurements on percolating gold in the ablation regime

We report on femtosecond laser ablation experiments on percolating gold layers deposited on a glass substrate. In our experiments, we measure changes in optical transmission and reflection induced by single, high-intensity infrared laser pulses as a function of the time delay between the pump and the probe. For the highest pump intensities we find that on a time scale of about 150 ps after excitation, the transmission and reflection approach values close to the substrate values. We attribute this rapid ablation to vaporization of the entire layer when the injected energy exceeds the cohesive energy of the material. This vaporization results in the rapid transformation of the gold layer into a sufficiently dilute mist of atoms and nano-particles which renders the material almost optically transparent to the probe pulse. SEM images of the surfaces show how the morphology of the films changes at relatively low excitation intensities and show the complete removal of the gold at high intensities. We find that the ablation threshold for percolating Au on glass is 2.3 × 10¹¹ W/cm², which is two orders of magnitude lower than the damage threshold for continuous gold layers as reported in the literature.

Tracking the Time Evolution of the Electron Distribution Function in Copper by Femtosecond Broadband Optical Spectroscopy

Multitemperature models are nowadays often used to quantify the ultrafast electron-phonon (boson) relaxations and coupling strengths in advanced quantum solids. To test their applicability and limitations, we perform systematic studies of carrier relaxation dynamics in copper, a prototype system for which the two-temperature model (TTM) was initially considered. Using broadband time-resolved optical spectroscopy, we study the time evolution of the electron distribution function, f(E), over a large range of excitation densities. Following intraband optical excitation, f(E) is found to be athermal over several 100 fs, with a substantial part of the absorbed energy already being transferred to the lattice. We show, however, that the electron-phonon coupling constant can still be obtained using the TTM analysis, provided that the data are analyzed over the time window where the electrons are already quasithermal, and the electronic temperature is determined experimentally.

Light interactions with supracrystals either deposited on a substrate or dispersed in water

Nanocrystals with low size distribution are able to self-assemble into a 3D crystalline structure called colloidal crystals or super/supracrystals.

Tailorable Dynamics in Nonlinear Optical Metasurfaces

Controlling light with light is essential for all-optical switching, data processing in optical communications and computing. Until now, all-optical control of light has relied almost exclusively on nonlinear optical interactions in materials. Achieving giant nonlinearities under low light intensity is essential for weak-light nonlinear optics. In the past decades, such weak-light nonlinear phenomena have been demonstrated in photorefractive and photochromic materials. However, their bulky size and slow speed have hindered practical applications. Metasurfaces, which enhance light-matter interactions at the nanoscale, provide a new framework with tailorable nonlinearities for weak-light nonlinear dynamics. Current advances in nonlinear metasurfaces are introduced, with a special emphasis on all-optical light controls. The tuning of the nonlinearity values using metasurfaces, including enhancement and sign reversal is presented. The tailoring of the transient behaviors of nonlinearities in metasurfaces to achieve femtosecond switching speed is also discussed. Furthermore, the impact of quantum effects from the metasurface on the nonlinearities is introduced. Finally, an outlook on the future development of this energetic field is offered.

Plasmon-induced efficient hot carrier generation in graphene on gold ultrathin film with periodic array of holes: Ultrafast pump-probe spectroscopy

Using ultrafast pump-probe reflectivity with a 3.1 eV pump and coherent white light probe (1.1-2.6 eV), we show that graphene on gold nanostructures exhibits a strong coupling to the plasmonic resonances of the ordered lattice hole array, thus injecting a high density of hot carriers in graphene through plasmons. The system being studied is single-layer graphene on an ultrathin film of gold with periodic arrangements of holes showing anomalous transmission. A comparison is made with gold film with and without hole array. By selectively probing transient carrier dynamics in the spectral regions corresponding to plasmonic resonances, we show efficient plasmon induced hot carrier generation in graphene. We also show that due to high electromagnetic field intensities at the edge of the submicron holes, fast decay time (10-100 fs), and short decay length (1 nm) of plasmons, a highly confined density of hot carriers (very close to the edge of the holes) is generated by Landau damping of plasmons within the holey gold film. A contribution to transient decay dynamics due to the diffusion of the initial nonuniform distribution of hot carriers away from the hole edges is observed. Our results are important for future applications of novel hot carrier device concepts where hot carriers with tunable energy can be generated in different graphene regions connected seamlessly.

High Quantum Efficiency Hot Electron Electrochemistry

Using hot electrons to drive electrochemical reactions has drawn considerable interest in driving high-barrier reactions and enabling efficient solar to fuel conversion. However, the conversion efficiency from hot electrons to electrochemical products is typically low due to high hot electron scattering rates. Here, it is shown that the hydrogen evolution reaction (HER) in an acidic solution can be efficiently modulated by hot electrons injected into a thin gold film by an Au-Al₂O₃-Si metal-insulator-semiconductor (MIS) junction. Despite the large scattering rates in gold, it is shown that the hot electron driven HER can reach quantum efficiencies as high as ∼85% with a shift in the onset of hydrogen evolution by ∼0.6 V. By simultaneously measuring the currents from the solution, gold, and silicon terminals during the experiments, we find that the HER rate can be decomposed into three components: (i) thermal electron, corresponding to the thermal electron distribution in gold; (ii) hot electron, corresponding to electrons injected from silicon into gold which drive the HER before fully thermalizing; and (iii) silicon direct injection, corresponding to electrons injected from Si into gold that drive the HER before electron-electron scattering occurs. Through a series of control experiments, we eliminate the possibility of the observed HER rate modulation coming from lateral resistivity of the thin gold film, pinholes in the gold, oxidation of the MIS device, and measurement circuit artifacts. Next, we theoretically evaluate the feasibility of hot electron injection modifying the available supply of electrons. Considering electron-electron and electron-phonon scattering, we track how hot electrons injected at different energies interact with the gold-solution interface as they scatter and thermalize. The simulator is first used to reproduce other published experimental pump-probe hot electron measurements, and then simulate the experimental conditions used here. These simulations predict that hot electron injection first increases the supply of electrons to the gold-solution interface at higher energies by several orders of magnitude and causes a peaked electron interaction with the gold-solution interface at the electron injection energy. The first prediction corresponds to the observed hot electron electrochemical current, while the second prediction corresponds to the observed silicon direct injection current. These results indicate that MIS devices offer a versatile platform for hot electron sources that can efficiently drive electrochemical reactions.

Plasmonic Photothermal Nanoparticles for Biomedical Applications

Recent advances of plasmonic nanoparticles include fascinating developments in the fields of energy, catalyst chemistry, optics, biotechnology, and medicine. The plasmonic photothermal properties of metallic nanoparticles are of enormous interest in biomedical fields because of their strong and tunable optical response and the capability to manipulate the photothermal effect by an external light source. To date, most biomedical applications using photothermal nanoparticles have focused on photothermal therapy; however, to fully realize the potential of these particles for clinical and other applications, the fundamental properties of photothermal nanoparticles need to be better understood and controlled, and the photothermal effect-based diagnosis, treatment, and theranostics should be thoroughly explored. This Progress Report summarizes recent advances in the understanding and applications of plasmonic photothermal nanoparticles, particularly for sensing, imaging, therapy, and drug delivery, and discusses the future directions of these fields.

Nanophotonic engineering of far-field thermal emitters

Thermal emission is a ubiquitous and fundamental process by which all objects at non-zero temperatures radiate electromagnetic energy. This process is often assumed to be incoherent in both space and time, resulting in broadband, omnidirectional light emission toward the far field, with a spectral density related to the emitter temperature by Planck's law. Over the past two decades, there has been considerable progress in engineering the spectrum, directionality, polarization and temporal response of thermally emitted light using nanostructured materials. This Review summarizes the basic physics of thermal emission, lays out various nanophotonic approaches to engineer thermal emission in the far field, and highlights several applications, including energy harvesting, lighting and radiative cooling.

Designer photonic dynamics by using non-uniform electron temperature distribution for on-demand all-optical switching times

While free electrons in metals respond to ultrafast excitation with refractive index changes on femtosecond time scales, typical relaxation mechanisms occur over several picoseconds, governed by electron-phonon energy exchange rates. Here, we propose tailoring these intrinsic rates by engineering a non-uniform electron temperature distribution through nanostructuring, thus, introducing an additional electron temperature relaxation channel. We experimentally demonstrate a sub-300 fs switching time due to the wavelength dependence of the induced hot electron distribution in the nanostructure. The speed of switching is determined by the rate of redistribution of the inhomogeneous electron temperature and not just the rate of heat exchange between electrons and phonons. This effect depends on both the spatial overlap between control and signal fields in the metamaterial and hot-electron diffusion effects. Thus, switching rates can be controlled in nanostructured systems by designing geometrical parameters and selecting wavelengths, which determine the control and signal mode distributions.

Here, the authors engineer a non-uniform electron temperature distribution through nanostructuring and demonstrate a sub-300 fs switching time. This can assist in the design of nanostructures for nonlinear optics, hot carrier extraction and photocatalysis

Direct observation of picosecond melting and disintegration of metallic nanoparticles

Despite more than a century of study, the fundamental mechanisms behind solid melting remain elusive at the nanoscale. Ultrafast phenomena in materials irradiated by intense femtosecond laser pulses have revived the interest in unveiling the puzzling processes of melting transitions. However, direct experimental validation of various microscopic models is limited due to the difficulty of imaging the internal structures of materials undergoing ultrafast and irreversible transitions. Here we overcome this challenge through time-resolved single-shot diffractive imaging using X-ray free electron laser pulses. Images of single Au nanoparticles show heterogeneous melting at the surface followed by density fluctuation deep inside the particle, which is directionally correlated to the polarization of the pumping laser. Observation of this directionality links the non-thermal electronic excitation to the thermal lattice melting, which is further verified by molecular dynamics simulations. This work provides direct evidence to the understanding of irreversible melting with an unprecedented spatiotemporal resolution.

Laser-matter interaction has been intensively studied in equilibrium states, but irreversible processes in a highly nonequilibrium state at nanoscales remains elusive due to experimental challenges. Here, Ihm et al. image heterogeneous melting of gold nanoparticles with nanometer and picosecond resolution.

Ultrafast Electron Dynamics in Single Aluminum Nanostructures

Aluminum nanostructures are a promising alternative material to noble metal nanostructures for several photonic and catalytic applications, but their ultrafast electron dynamics remain elusive. Here, we combine single-particle transient extinction spectroscopy and parameter-free first-principles calculations to investigate the non-equilibrium carrier dynamics in aluminum nanostructures. Unlike gold nanostructures, we find the sub-picosecond optical response of lithographically fabricated aluminum nanodisks to be more sensitive to the lattice temperature than the electron temperature. We assign the rise in the transient transmission to electron-phonon coupling with a pump-power-independent lifetime of 500 ± 100 fs and theoretically confirm this strong electron-phonon coupling behavior. We also measure electron-phonon lifetimes in chemically synthesized aluminum nanocrystals and find them to be even longer (1.0 ± 0.1 ps) than for the nanodisks. We also observe a rise and decay in the transient transmissions with amplitudes that scale with the surface-to-volume ratio of the aluminum nanodisks, implying a possible hot carrier trapping and detrapping at the native oxide shell-metal core interface.

Tracking ultrafast hot-electron diffusion in space and time by ultrafast thermomodulation microscopy

The ultrafast response of metals to light is governed by intriguing nonequilibrium dynamics involving the interplay of excited electrons and phonons. The coupling between them leads to nonlinear diffusion behavior on ultrashort time scales. Here, we use scanning ultrafast thermomodulation microscopy to image the spatiotemporal hot-electron diffusion in thin gold films. By tracking local transient reflectivity with 20-nm spatial precision and 0.25-ps temporal resolution, we reveal two distinct diffusion regimes: an initial rapid diffusion during the first few picoseconds, followed by about 100-fold slower diffusion at longer times. We find a slower initial diffusion than previously predicted for purely electronic diffusion. We develop a comprehensive three-dimensional model based on a two-temperature model and evaluation of the thermo-optical response, taking into account the delaying effect of electron-phonon coupling. Our simulations describe well the observed diffusion dynamics and let us identify the two diffusion regimes as hot-electron and phonon-limited thermal diffusion, respectively.

Light-heat conversion dynamics in highly diversified water-dispersed hydrophobic nanocrystal assemblies

We investigate, with a combination of ultrafast optical spectroscopy and semiclassical modeling, the photothermal properties of various water-soluble nanocrystal assemblies. Broadband pump-probe experiments with ∼100-fs time resolution in the visible and near infrared reveal a complex scenario for their transient optical response that is dictated by their hybrid composition at the nanoscale, comprising metallic (Au) or semiconducting ([Formula: see text]) nanostructures and a matrix of organic ligands. We track the whole chain of energy flow that starts from light absorption by the individual nanocrystals and subsequent excitation of out-of-equilibrium carriers followed by the electron-phonon equilibration, occurring in a few picoseconds, and then by the heat release to the matrix on the 100-ps timescale. Two-dimensional finite-element method electromagnetic simulations of the composite nanostructure and multitemperature modeling of the energy flow dynamics enable us to identify the key mechanism presiding over the light-heat conversion in these kinds of nanomaterials. We demonstrate that hybrid (organic-inorganic) nanocrystal assemblies can operate as efficient nanoheaters by exploiting the high absorption from the individual nanocrystals, enabled by the dilution of the inorganic phase that is followed by a relatively fast heating of the embedding organic matrix, occurring on the 100-ps timescale.

Anti-Stokes Emission from Hot Carriers in Gold Nanorods

The origin of light emission from plasmonic nanoparticles has been strongly debated lately. It is present as the background of surface-enhanced Raman scattering and, despite the low yield, has been used for novel sensing and imaging applications because of its photostability. Although the role of surface plasmons as an enhancing antenna is widely accepted, the main controversy regarding the mechanism of the emission is its assignment to either radiative recombination of hot carriers (photoluminescence) or electronic Raman scattering (inelastic light scattering). We have previously interpreted the Stokes-shifted emission from gold nanorods as the Purcell effect enhanced radiative recombination of hot carriers. Here we specifically focused on the anti-Stokes emission from single gold nanorods of varying aspect ratios with excitation wavelengths below and above the interband transition threshold while still employing continuous wave lasers. Analysis of the intensity ratios between Stokes and anti-Stokes emission yields temperatures that can only be interpreted as originating from the excited electron distribution and not a thermally equilibrated phonon population despite not using pulsed laser excitation. Consistent with this result as well as previous emission studies using ultrafast lasers, the power-dependence of the upconverted emission is nonlinear and gives the average number of participating photons as a function of emission wavelength. Our findings thus show that hot carriers and photoluminescence play a major role in the upconverted emission.

Localized Nanoscale Heating Leads to Ultrafast Hydrogel Volume-Phase Transition

The rate of the volume-phase transition for stimuli-responsive hydrogel particles ranging in size from millimeters to nanometers is limited by the rate of water transport, which is proportional to the surface area of the particle. Here, we hypothesized that the rate of volume-phase transition could be accelerated if the stimulus is geometrically controlled from the inside out, thus facilitating outward water ejection. To test this concept, we applied transient absorption spectroscopy, laser temperature-jump spectroscopy, and finite-element analysis modeling to characterize the dynamics of the volume-phase transition of hydrogel particles with a gold nanorod core. Our results demonstrate that the nanoscale heating of the hydrogel particle core led to an ultrafast, 60 ns particle collapse, which is 2-3 orders of magnitude faster than the response generated from conventional heating. This is the fastest recorded response time of a hydrogel material, thus opening potential applications for such stimuli-responsive materials.

Ultrafast optical response of plasmonic structures beyond the perturbative regime: evidence of universal saturation dynamics

The transient optical response of gold nanorods is investigated beyond the perturbative regime. Ultrafast pump-probe spectroscopy and semiclassical modeling of hot electrons reveal a universal mechanism presiding over the saturation of nonlinear plasmonic effects.

Nonequilibrium optical properties of transition metals upon ultrafast electron heating

Femtosecond laser excitation of metals triggers swift modifications of the electronic distribution within the band structure. This has direct consequences on optical transitions transiently modifying the optical properties of materials. Influencing in real time the action of the pulse, these changes lead to substantial variations of the amount and the distribution in the energy deposited during the laser irradiation. The effect of the laser pulse can be described considering electrons heated to a range of electronic temperatures. In order to evaluate the dielectric response of ultrafast heated electrons, we performed ab initio molecular dynamic simulations coupled to the Kubo-Greenwood formalism and determined electronic temperature dependent optical properties. A series of representative transition metals was investigated: Cu, Ni, Cr, W, Ti, and Fe. The evolution of the optical properties is optically-pumped based on electronic redistribution within the density of electronic states. The proposed interpretation rely on modifications of the energy range of occupied states undergoing optical electronic transitions. It is found that the degree of filling and the shape of the d-block drive the dynamics of optical processes. Nonequilibrium optical indices, reflectivities and skin depths are reported for electron thermal excitation relevant to near-threshold laser ablation regimes. The effect of the electron temperature on optical properties allows to reconstruct and model ultrafast excitation dynamics in time-resolved diagnostics with relevance in laser micro- and nano-processing.

Detection of periodic structures through opaque metal layers by optical measurements of ultrafast electron dynamics

We report on femtosecond optical pump-probe measurements of ultrafast electron dynamics to detect the presence of gratings buried underneath optically opaque gold layers. Electron energy diffusion and cooling are found to be strongly affected by the presence and type of metal buried below the gold layer. As a result, the spatially periodic buried grating is encoded on the electron temperature near the top surface, leading to a spatially periodic modulation of the optical properties near the gold surface from which a delayed probe pulse can be diffracted. Our measurements show that these effects may be useful for optical detection and alignment applications in semiconductor device manufacturing.

Understanding photoluminescence of metal nanostructures based on an oscillator model

Scattering and absorption properties of metal nanostructures have been well understood based on the classic oscillator theory. Here, we demonstrate that photoluminescence of metal nanostructures can also be explained based on a classic model. The model shows that inelastic radiation of an oscillator resembles its resonance band after external excitation, and is related to the photoluminescence from metallic nanostructures. The understanding based on the classic oscillator model is in agreement with that predicted by a quantum electromagnetic cavity model. Moreover, by correlating a two-temperature model and the electron distributions, we demonstrate that both one-photon and two-photon luminescence of the metal nanostructures undergo the same mechanism. Furthermore, the model explains most of the emission characteristics of the metallic nanostructures, such as quantum yield, spectral shape, excitation polarization and power dependence. The model based on an oscillator provides an intuitive description of the photoluminescence process and may enable rapid optimization and exploration of the plasmonic properties.

Nonmetal to Metal Transition and Ultrafast Charge Carrier Dynamics of Zn Clusters on p-Si(100) by fs-XUV Photoemission Spectroscopy

Understanding the electronic structure and charge carrier dynamics of supported clusters is important due to their many potential applications in photochemistry and catalysis. In this investigation, photoemission spectroscopy, in conjunction with femtosecond extreme ultraviolet (XUV) laser pulses, is used to investigate the electronic structure and ultrafast charge carrier dynamics at a Si(100) surface decorated with Zn clusters. Static photoemission spectroscopy is used to investigate the changes in the electronic structure as the dimensionality of the Zn is increased from small clusters composed of a very few atoms to metallic Zn particles. Furthermore, femtosecond optical-pump XUV-probe photoemission spectroscopy is employed to induce a charge transfer from the p-Si(100) substrate to the Zn clusters and to measure in real time the charge trapping at the Zn cluster as well as the subsequent charge relaxation. The ultrafast charge carrier dynamics are also investigated for small clusters and metallic Zn particles. Significant transient charging of the Zn clusters after excitation of the Si(100) substrate by 800 nm light is observed for Zn coverages greater than 0.12 ML Zn, which coincides with the formation of a Schottky barrier at the interface between the Zn particle and the p-Si(100) substrate. The transient signals show that the charge trapping time at the Zn cluster varies with the cluster size, which is rationalized based on the electronic structure of the cluster as well as the band energy alignment at the Zn cluster-Si(100) junction.

Spatial and Temporal Confined Photothermolysis of Cancer Cells Mediated by Hollow Gold Nanospheres Targeted to Epidermal Growth Factor Receptors

To date, a few studies have investigated the potential use of a short-pulsed laser in selective tumor cell destruction or its mechanism of cell killing. Computer simulation of the spatial and temporal profiles of temperature elevation after pulsed laser irradiation on an infinitesimal point source estimated that the temperature reached its highest point at ∼35 ns after a single 15 ns laser pulse. Moreover, temperature elevation was confined to a radius of sub-micrometer and returned to baseline within 100 ns. To investigate the effect of 15 ns laser pulses on A431 tumor cells, we conjugated hollow gold nanospheres (HAuNSs) to an antibody (C225) directed at the epithelial growth factor receptor. The resulting nanoparticles, C225-HAuNSs, bound to the cell membrane, internalized, and distributed throughout the cytoplasm, with some nanoparticles transported to the vicinity of the nuclear membrane. On using an optical microscope mounted to a tunable pulsed Ti:sapphire laser, rapid and extensive damage of live cancer cells was observed, whereas irradiation of A431 cells pretreated with nontargeted HAuNSs with a pulsed laser or pretreated with C225-HAuNSs with a continuous-wave laser-induced minimal cellular damage. Furthermore, after a single 15 ns laser pulse, C225-HAuNS-treated A431 cells cocultured with 3T3 fibroblasts showed signs of selective destruction. Thus, compared with a continuous-wave laser, shots of a short-pulsed laser were the most damaging to tumor cells that bound HAuNSs and generated the least heat to the surrounding environment. This mode of action by a short-pulsed laser on cancer cells (i.e., confined photothermolysis) may have potential applications in selective tumor cell destruction.

Determination of hot carrier energy distributions from inversion of ultrafast pump-probe reflectivity measurements

Developing a fundamental understanding of ultrafast non-thermal processes in metallic nanosystems will lead to applications in photodetection, photochemistry and photonic circuitry. Typically, non-thermal and thermal carrier populations in plasmonic systems are inferred either by making assumptions about the functional form of the initial energy distribution or using indirect sensors like localized plasmon frequency shifts. Here we directly determine non-thermal and thermal distributions and dynamics in thin films by applying a double inversion procedure to optical pump-probe data that relates the reflectivity changes around Fermi energy to the changes in the dielectric function and in the single-electron energy band occupancies. When applied to normal incidence measurements our method uncovers the ultrafast excitation of a non-Fermi-Dirac distribution and its subsequent thermalization dynamics. Furthermore, when applied to the Kretschmann configuration, we show that the excitation of propagating plasmons leads to a broader energy distribution of electrons due to the enhanced Landau damping.

The determination of thermal and non-thermal carrier populations in plasmonic systems generally requires assumptions on the types of distributions present. Here, Heilpern et al. directly determine such populations in thin film pump-probe measurements using a double inversion procedure.