The periodontal ligament: a unique, multifunctional connective tissue

25-hydroxyvitamin D3 generates immunomodulatory plasticity in human periodontal ligament-derived mesenchymal stromal cells that is inflammatory context-dependent

INTRODUCTION

Human periodontal ligament-derived mesenchymal stromal cells (hPDL-MSCs) exhibit a tight bi-directional interaction with CD4+ T lymphocytes. The hPDL-MSCs' immunomodulatory abilities are drastically enhanced by pro-inflammatory cytokines via boosting the expression of various immunomediators. 25-hydroxyvitamin D3 (25(OH)D3), the major metabolite of vitamin D3 in the blood, affects both hPDL-MSCs and CD4+ T lymphocytes, but its influence on their interaction is unknown.

METHODS

Therefore, primary hPDL-MSCs were stimulated in vitro with tumor necrosis factor (TNF)-α a or interleukin (IL)-1β in the absence and presence of 25(OH)D3 followed by an indirect co-culture with phytohemagglutinin-activated CD4+ T lymphocytes. The CD4+ T lymphocyte proliferation, viability, and cytokine secretion were analyzed. Additionally, the expression of various immunomediators in hPDL-MSCs was investigated, and their implication was verified by using pharmacological inhibitors.

RESULTS

25(OH)D3 significantly counteracted the suppressive effects of IL-1β-treated hPDL-MSCs on CD4+ T lymphocyte proliferation, whereas no effects were observed in the presence of TNF-α. Additionally, 25(OH)D3 significantly increased the percentage of viable CD4+ T lymphocytes via TNF-α- or IL-1β-treated hPDL-MSCs. It also caused a significant decrease in interferon-γ, IL-17A, and transforming growth factor-β productions, which were triggered by TNF-α-treated hPDL-MSCs. 25(OH)D3 significantly decreased the production of various immunomediators in hPDL-MSCs. Inhibition of two of them, prostaglandin E2 and indoleamine-2,3-dioxygenase-1, partially abolished some of the hPDL-MSCs-mediated effects of 25(OH)D3 on CD4+ T lymphocytes.

CONCLUSION

These data indicate that 25(OH)D3 influences the immunomodulatory activities of hPDL-MSCs. This modulatory potential seems to have high plasticity depending on the local cytokine conditions and may be involved in regulating periodontal tissue inflammatory processes.

Current perspectives of residual ridge resorption: Pathological activation of oral barrier osteoclasts

PURPOSE

Tooth extraction is a last resort treatment for resolving pathological complications of dentition induced by infection and injury. Although the extraction wound generally heals uneventfully, resulting in the formation of an edentulous residual ridge, some patients experience long-term and severe residual ridge reduction. The objective of this review was to provide a contemporary understanding of the molecular and cellular mechanisms that may potentially cause edentulous jawbone resorption.

STUDY SELECTION

Clinical, in vivo, and in vitro studies related to the characterization of and cellular and molecular mechanisms leading to residual ridge resorption.

RESULTS

The alveolar processes of the maxillary and mandibular bones uniquely juxtapose the gingival tissue. The gingival oral mucosa is an active barrier tissue that maintains homeostasis of the internal organs through its unique barrier immunity. Tooth extraction not only generates a bony socket but also injures oral barrier tissue. In response to wounding, the alveolar bone socket initiates regeneration and remodeling through coupled bone formation and osteoclastic resorption. Osteoclasts are also found on the external surface of the alveolar bone, interfacing the oral barrier tissue. Osteoclasts in the oral barrier region are not coupled with osteoblastic bone formation and often remain active long after the completion of wound healing, leading to a net decrease in the alveolar bone structure.

CONCLUSIONS

The novel concept of oral barrier osteoclasts may provide important clues for future clinical strategies to maintain residual ridges for successful prosthodontic and restorative therapies.

MicroRNA Modulation during Orthodontic Tooth Movement: A Promising Strategy for Novel Diagnostic and Personalized Therapeutic Interventions

The Orthodontic Tooth Movement (OTM) is allowed through a mediated cell/tissue mechanism performed by applying a force or a pair of forces on the dental elements, and the tooth movement is a fundamental requirement during any orthodontic treatment. In this regard, it has been widely shown that each orthodontic treatment has a minimum duration required concerning numerous factors (age, patient compliance, type of technique used, etc.). In this regard, the aim of the following revision of the literature is to give readers a global vision of principal microRNAs (miRNAs) that are most frequently associated with OTM and their possible roles. Previously published studies of the last 15 years have been considered in the PubMed search using "OTM" and "miRNA" keywords for the present review article. In vitro and in vivo studies and clinical trials were mainly explored. Correlation between OTM and modulation of several miRNAs acting through post-transcriptional regulation on target genes was observed in the majority of previous studied. The expression analysis of miRNAs in biological samples, such as gingival crevicular fluid (GCF), can be considered a useful tool for novel diagnostic and/or prognostic approaches and for new personalized orthodontic treatments able to achieve a better clinical response rate. Although only a few studies have been published, the data obtained until now encourage further investigation of the role of miRNA modulation during orthodontic treatment. The aim of this study is to update the insights into the role and impact of principal micro-RNAs (miRNAs) that are most frequently associated during OTM.

Cell-free immunomodulatory biomaterials mediated in situ periodontal multi-tissue regeneration and their immunopathophysiological processes

Cell-free biomaterials-inducing endogenous in situ multi-tissue regeneration is very challenging and applying advanced immunomodulatory biomaterials can be an effective strategy to overcome it. In-depth knowledge of the immunopathophysiological mechanisms should be acquired before applying such an immunomodulation strategy. In this study, we implanted different immunoregulatory cell-free biomaterials into periodontal multi-tissue defects and showed that the outcome of multi-tissue regeneration is closely regulated by the immune reaction. The underlying immunopathophysiological processes, including the blood clotting response and fibrinoid necrosis, innate and adaptive immune response, local and systemic immune reaction, growth factors release, and stem cells recruitment, were revealed. The implantation of biomaterials with anti-inflammatory properties could direct the immunopathophysiological process and make it more favorable for in situ multi-tissue regeneration, ultimately enabling the regeneration of the periodontal ligament, the acellular cementum matrix, and the alveolar bone in the periodontium. These findings further confirm the effectiveness of immunomodulatory based strategy and the unveiling of their immunopathophysiological processes could provide some favorable theoretical bases for the development of advanced cell-free immunomodulatory multi-tissue regenerative biomaterials.

Decorin Promotes Osteoblastic Differentiation of Human Periodontal Ligament Stem Cells

The aim of this study is to clarify the biological functions of decorin (DCN) in the healing and regeneration of wounded periodontal tissue. We investigated the expression pattern of DCN during the healing of wounded periodontal tissue in rats by immunohistochemistry and the effects of DCN on the osteoblastic differentiation of human periodontal ligament (PDL) stem cells (HPDLSCs) and preosteoblasts by Alizarin red S staining, quantitative reverse transcription-polymerase chain reactions, and western blotting. The expression of DCN was increased around the wounded PDL tissue on day 5 after surgery compared with the nonwounded PDL tissue, whereas its expression was not changed in the osteoblastic layer around the wounded alveolar bone. Furthermore, DCN promoted the osteoblastic differentiation of HPDLSCs, but it did not affect the osteoblastic differentiation of preosteoblasts. ERK1/2 phosphorylation was upregulated during the DCN-induced osteoblastic differentiation of HPDLSCs. DCN did not affect proliferation, migration, or the PDL-related gene expression of HPDLSCs. In conclusion, this study demonstrates that DCN has a role in the healing of wounded periodontal tissue. Furthermore, DCN secreted from PDL cells may contribute to bone healing by upregulating osteoblastic differentiation through ERK1/2 signaling in HPDLSCs, indicating a therapeutic effect of DCN in periodontal tissue regeneration.

Challenges of Periodontal Tissue Engineering: Increasing Biomimicry through 3D Printing and Controlled Dynamic Environment

In recent years, tissue engineering studies have proposed several approaches to regenerate periodontium based on the use of three-dimensional (3D) tissue scaffolds alone or in association with periodontal ligament stem cells (PDLSCs). The rapid evolution of bioprinting has sped up classic regenerative medicine, making the fabrication of multilayered scaffolds-which are essential in targeting the periodontal ligament (PDL)-conceivable. Physiological mechanical loading is fundamental to generate this complex anatomical structure ex vivo. Indeed, loading induces the correct orientation of the fibers forming the PDL and maintains tissue homeostasis, whereas overloading or a failure to adapt to mechanical load can be at least in part responsible for a wrong tissue regeneration using PDLSCs. This review provides a brief overview of the most recent achievements in periodontal tissue engineering, with a particular focus on the use of PDLSCs, which are the best choice for regenerating PDL as well as alveolar bone and cementum. Different scaffolds associated with various manufacturing methods and data derived from the application of different mechanical loading protocols have been analyzed, demonstrating that periodontal tissue engineering represents a proof of concept with high potential for innovative therapies in the near future.

Dental manifestation and management of hypophosphatasia

Hypophosphatasia is an inherited metabolic disorder characterized by defective mineralization of bones and teeth with a wide variety of manifestations, ranging from stillbirth to dental symptoms alone. Recently, the prognosis of severe hypophosphatasia patients has been greatly improved by the introduction of enzyme replacement therapy. The typical dental manifestation is early exfoliation of primary teeth due to disturbed cementum formation, so dentures are recommended to ensure that important oral functions are acquired. Some studies have shown that enzyme replacement therapy improves dental mineralization, resulting in the stabilization of periodontal tissues and better growth of tooth roots. A nationwide Japanese survey revealed the common genetic and dental manifestations of patients with mild hypophosphatasia, which markedly differ from those of the severe forms. There may be many undiagnosed mild patients, so dentists should contribute to the early diagnosis by screening possible cases based on the typical finding of early exfoliation of primary teeth. Early diagnosis is important for patients to receive early intervention in both medical and dental fields. The establishment of fundamental dental therapy to solve the dental problems is still underway and is eagerly anticipated.

Plap-1 lineage tracing and single-cell transcriptomics reveal cellular dynamics in the periodontal ligament

Periodontal tissue supports teeth in the alveolar bone socket via fibrous attachment of the periodontal ligament (PDL). The PDL contains periodontal fibroblasts and stem/progenitor cells, collectively known as PDL cells (PDLCs), on top of osteoblasts and cementoblasts on the surface of alveolar bone and cementum, respectively. However, the characteristics and lineage hierarchy of each cell type remain poorly defined. This study identified periodontal ligament associated protein-1 (Plap-1) as a PDL-specific extracellular matrix protein. We generated knock-in mice expressing CreERT2 and GFP specifically in Plap-1-positive PDLCs. Genetic lineage tracing confirmed the long-standing hypothesis that PDLCs differentiate into osteoblasts and cementoblasts. A PDL single-cell atlas defined cementoblasts and osteoblasts as Plap-1−Ibsp+Sparcl1+ and Plap-1−Ibsp+Col11a2+, respectively. Other populations, such as Nes+ mural cells, S100B+ Schwann cells, and other non-stromal cells, were also identified. RNA velocity analysis suggested that a Plap-1highLy6a+ cell population was the source of PDLCs. Lineage tracing of Plap-1+ PDLCs during periodontal injury showed periodontal tissue regeneration by PDLCs. Our study defines diverse cell populations in PDL and clarifies the role of PDLCs in periodontal tissue homeostasis and repair.

Dual peptide-functionalized hydrogels differentially control periodontal cell function and promote tissue regeneration

Restoring the tooth-supporting tissues lost during periodontitis is a significant clinical challenge, despite advances in both biomaterial and cell-based approaches. This study investigated poly(ethylene glycol) (PEG) hydrogels functionalized with integrin-binding peptides RGD and GFOGER for controlling periodontal ligament cell (PDLC) activity and promoting periodontal tissue regeneration. Dual presentation of RGD and GFOGER within PEG hydrogels potentiated two key PDLC functions, alkaline phosphatase (ALP) activity and matrix mineralization, over either peptide alone and could be tuned to differentially promote each function. Hydrogel matrix mineralization, fostered by high concentrations of GFOGER together with RGD, identified a PDLC phenotype with accelerated matrix adhesion formation and expression of cementoblast and osteoblast genes. In contrast, maximizing ALP activity through high RGD and low GFOGER levels resulted in minimal hydrogel mineralization, in part, through altered PDLC pyrophosphate regulation. Transplantation of PDLCs in hydrogels optimized for either outcome promoted cementum formation in rat periodontal defects; however, only hydrogels optimized for in vitro mineralization improved new bone formation. Overall, these results highlight the utility of engineered hydrogel systems for controlling PDLC functions and their promise for promoting periodontal tissue regeneration.

Argpyrimidine bonded to RAGE regulates autophagy and cell cycle to cause periodontal destruction

Argpyrimidine (APMD), a methylglyoxal-arginine-derived product, is one of the main products of diabetes mellitus. We aimed to systematically investigate the role of APMD in regulating autophagy activity, with a specific focus on the finding of APDM binding molecule, matching amino acid residues, autophagy flux and proteins, cell cycle arrest, cell skeleton and migration, PI3K/AKT/mTOR pathways, inflammatory signals, alveolar bone destruction, and inhibition verification. In this study, binding to 59/94/121 amino acid residues of advanced glycosylation end product receptor (RAGE), APMD suppressed PI3K/AKT/mTOR pathway to attenuate cell survival of periodontal ligament cells (PDLCs). Simultaneously, autophagy proteins ATG5, Beclin1, and LC3-II/I expression ratio were upregulated while P62/SQSTM was downregulated. Cell cycle arrested at G0/G1 with enhancing Cyclin D1/CDK4 and decreasing Cyclin A/CDK2 expression. Inhibition of autophagy abrogated APMD-induced cell cycle arrest. Furthermore, the inflammation regulation network of matrix metalloproteinase (MMP)-2, MMP-9, MAPKs and NF-κB pathways were activated by APMD. Rat periodontal models confirmed that APMD induced alveolar bone resorption, increased inflammatory infiltrates, and degraded collagen fibers through RAGE and PI3K. APMD-induced autophagy, G0/G1 arrest, pro-inflammatory signals activating and periodontal destruction were reversed by RAGE knockdown while aggravated by PI3K inhibitor. This study provides the first evidence that APMD bind to RAGE to regulate autophagy and cell cycle of PDLCs through the PI3K/AKT/mTOR pathway, thereby promoting periodontal destruction.

CTGF Promotes the Osteoblast Differentiation of Human Periodontal Ligament Stem Cells by Positively Regulating BMP2/Smad Signal Transduction

Objective

This work is aimed at revealing the role and the molecular mechanism of connective tissue growth factor 2 (CTGF) in the osteoblast differentiation of periodontal ligament stem cells (PDLSCs).

Methods

The osteogenic differentiation of PDLSCs was induced by osteogenic induction medium (OM), and the expression level of osteogenic related proteins ALP, RUNX2, OCN, and CTGF was estimated using quantitative real-time polymerase chain reaction (qRT-PCR) and Western blotting analysis. We constructed cell lines with CTGF overexpression or knockdown to verify the role of CTGF in the osteoblast differentiation of PDLSCs. Alkaline phosphatase (ALP) staining was introduced to measure the osteoblasts activity, and alizarin red S (ARS) staining was employed to test matrix mineralization. The interaction between CTGF and bone morphogenetic protein-2 (BMP-2) was determined by endogenous coimmunoprecipitation (Co-IP).

Results

The expression level of CTGF was increased during the osteogenic induction of PDLSCs. Additionally, CTGF overexpression effectively maintained the stemness and facilitated the osteoblast differentiation in PDLSCs, and CTGF knockdown exerted opposite effects. Moreover, at molecular mechanism, CTGF increased the activity of BMP-2/Smad signaling pathway.

Conclusion

This investigation verified that CTGF promotes the osteoblast differentiation in PDLSCs at least partly by activating BMP-2/Smad cascade signal.

Three-dimensional measurement of periodontal support during surgical orthodontic treatment of high-angle skeletal Class III malocclusion: A retrospective study

INTRODUCTION

This study aimed to quantify the periodontal health of incisors during surgical orthodontic treatment in patients with high-angle Class III malocclusion using a cone-beam computed tomography (CBCT) 3-dimensional (3D) reconstruction technique.

METHODS

The sample consisted of 30 patients with high-angle Class III malocclusion (mean age, 20.53 ± 2.86 years). CBCT images were taken before treatment (T0), after presurgical orthodontic treatment, and after treatment (T2). In addition, 3D tooth and alveolar bone models were generated. The root surface area, periodontal ligament (PDL)_Area, and vertical bone level (VBL) around the maxillary and mandibular central incisors were measured.

RESULTS

The root surface area and PDL_Area of maxillary and mandibular central incisors decreased continuously between T0 and T2 (P <0.01). At T2, mandibular central incisors showed 38.64 ± 13.39% PDL_Area loss, and maxillary central incisors exhibited 21.13 ± 16.48% PDL_Area loss. For mandibular central incisors, the PDL_Area loss caused by VBL loss was significantly greater than that for maxillary central incisors (P <0.01) and significantly greater than the PDL_Area loss caused by root resorption (P <0.01). From T0 to T2, the lingual surface of maxillary central incisors exhibited greater VBL loss than the other 3 surfaces (P <0.01), and the labial and lingual surfaces of mandibular central incisors demonstrated greater VBL loss than proximal surfaces (P <0.01).

CONCLUSIONS

The 3D CBCT reconstruction method provides useful information regarding the periodontal defects of incisors in patients with high-angle skeletal Class III malocclusion. The PDL_Area of maxillary and mandibular central incisors decreased continuously during the treatment. Vertical alveolar bone levels at proximal surfaces appeared to be relatively stable.

Between a rock and a hard place: Regulation of mineralization in the periodontium

The periodontium supports and attaches teeth via mineralized and nonmineralized tissues. It consists of two, unique mineralized tissues, cementum and alveolar bone. In between these tissues, lies an unmineralized, fibrous periodontal ligament (PDL), which distributes occlusal forces, nourishes and invests teeth, and harbors progenitor cells for dentoalveolar repair. Many unanswered questions remain regarding periodontal biology. This review will focus on recent research providing insights into one enduring mystery: the precise regulation of the hard-soft tissue borders in the periodontium which define the interfaces of the cementum-PDL-alveolar bone structure. We will focus on advances in understanding the molecular mechanisms that maintain the unmineralized PDL "between a rock and a hard place" by regulating the mineralization of cementum and alveolar bone.

Diverse stem cells for periodontal tissue formation and regeneration

The periodontium is comprised of multiple units of mineralized and nonmineralized tissues including the cementum on the root surface, the alveolar bone, periodontal ligament (PDL), and the gingiva. PDL contains a variety of cell populations including mesenchymal stem/progenitor cells (MSCs) termed PDLSCs, which contribute to periodontal regeneration. Recent studies utilizing mouse genetic models shed light on the identities of these mesenchymal progenitors in their native environment, particularly regarding how they contribute to homeostasis and repair of the periodontium. The current concept is that mesenchymal progenitors in the PDL are localized to the perivascular niche. Single-cell RNA sequencing (scRNA-seq) analyses reveal heterogeneity and cell-type specific markers of cells in the periodontium, as well as their developmental relationship with precursor cells in the dental follicle. The characteristics of PDLSCs and their diversity in vivo are now beginning to be unraveled thanks to insights from mouse genetic models and scRNA-seq analyses, which aid to uncover the fundamental properties of stem cells in the human PDL. The new knowledge will be highly important for developing more effective stem cell-based regenerative therapies to repair periodontal tissues in the future.

Mechanical Compression by Simulating Orthodontic Tooth Movement in an In Vitro Model Modulates Phosphorylation of AKT and MAPKs via TLR4 in Human Periodontal Ligament Cells

Mechanical compression simulating orthodontic tooth movement in in vitro models induces pro-inflammatory cytokine expression in periodontal ligament (PDL) cells. Our previous work shows that TLR4 is involved in this process. Here, primary PDL cells are isolated and characterized to better understand the cell signaling downstream of key molecules involved in the process of sterile inflammation via TLR4. The TLR4 monoclonal blocking antibody significantly reverses the upregulation of phospho-AKT, caused by compressive force, to levels comparable to controls by inhibition of TLR4. Phospho-ERK and phospho-p38 are also modulated in the short term via TLR4. Additionally, moderate compressive forces of 2 g/cm², a gold standard for static compressive mechanical stimulation, are not able to induce translocation of Nf-kB and phospho-ERK into the nucleus. Accordingly, we demonstrated for the first time that TLR4 is also one of the triggers for signal transduction under compressive force. The TLR4, one of the pattern recognition receptors, is involved through its specific molecular structures on damaged cells during mechanical stress. Our findings provide the basis for further research on TLR4 in the modulation of sterile inflammation during orthodontic therapy and periodontal remodeling.

Development and regeneration of periodontal supporting tissues

Periodontal tissues, including gingiva, cementum, periodontal ligament, and alveolar bone, play important roles in oral health. Under physiological conditions, periodontal tissues surround and support the teeth, maintaining the stability of the teeth and distributing the chewing forces. However, under pathological conditions, with the actions of various pathogenic factors, the periodontal tissues gradually undergo some irreversible changes, that is, gingival recession, periodontal ligament rupture, periodontal pocket formation, alveolar bone resorption, eventually leading to the loosening and even loss of the teeth. Currently, the regenerations of the periodontal tissues are still challenging. Therefore, it is necessary to study the development of the periodontal tissues, the principles and processes of which can be used to develop new strategies for the regeneration of periodontal tissues. This review summarizes the development of periodontal tissues and current strategies for periodontal healing and regeneration.

Titanium Nanosurface with a Biomimetic Physical Microenvironment to Induce Endogenous Regeneration of the Periodontium

The periodontium supports the teeth by dentoalveolar fibrous joints that serve unique oral functions. Endogenous regeneration of the periodontium around artificial teeth (dental implants) provides a cost-effective solution for the extension of healthy life expectancy but remains a challenge in regenerative medicine. Biomimetics can create smart biomaterials that tune endogenous cells at a tissue-material interface. Here, we created a smart titanium nanosurface mimicking the surface nanotopography and micromechanical properties of the tooth root cementum (TRC), which is essential for the induction of dentoalveolar fibrous joints to regenerate the periodontium. After transplantation into the rat renal capsule, only the titanium artificial tooth with the TRC-mimetic nanosurface formed a complex dentoalveolar fibrous joint structure, with bone tissue, periodontal ligament (PDL), and TRC, in the decellularized jawbone matrix. TRC-mimetic titanium implants induce the formation of functional periodontium, even in a jawbone implantation model, which generally causes osseointegration (ankyloses). In human PDL cells, TRC analogousness in the surface mechanical microenvironment regulates matrix mineralization through bone sialoprotein expression and phosphorus metabolism, which are critical for cementogenesis. Therefore, the titanium nanosurfaces with nanotopographical and mechanical microenvironments mimicking the TRC surface induce dentoalveolar fibrous joints for periodontal regeneration by interfacial tuning of endogenous cells.

Strain Measurement within an Intact Swine Periodontal Ligament

The periodontal ligament (PDL) provides support, proprioception, nutrition, and protection within the tooth–PDL–bone complex (TPBC). While understanding the mechanical behavior of the PDL is critical, current research has inferred PDL mechanics from finite element models, from experimental measures on complete TPBCs, or through direct measurement of isolated PDL sections. Here, transducers are used in an attempt to quantify ex vivo PDL strain. In-fiber Bragg grating (FBG) sensors are small flexible sensors that can be placed within an intact TPBC and yield repeatable strain measurements from within the PDL space. The objective of this study was to determine: 1) if the FBG strain measured from the PDL space of intact swine premolars ex vivo was equivalent to physical PDL strains estimated through finite element analysis and 2) if a change in FBG strain could be linearly related to a change in finite element strain under variable tooth displacement, applied to an intact swine TPBC. Experimentally, individual TPBCs were subjected to 2 displacements (n = 14). The location of the FBG was determined from representative micro–computed tomography images. From a linear elastic finite element model of a TPBC, the strain magnitudes at the sensor locations were recorded. An experimental ratio (i.e., FBG strain at the first displacement divided by the FBG strain at the second displacement) and a finite element ratio (i.e., finite element strain at the first displacement divided by the finite element strain at the second displacement) were calculated. A linear regression model indicated a statistically significant relationship between the experimental and finite element ratio (P = 0.017) with a correlation coefficient (R²) of 0.448. It was concluded that the FBG sensor could be used as a measure for a change in strain and thus could be implemented in applications where the mechanical properties of an intact PDL are monitored over time.

Fibrillin protein, a candidate for creating a suitable scaffold in PDL regeneration while avoiding ankylosis

The tooth is stabilized by fiber-rich tissue called the periodontal ligament (PDL). The narrow space of the PDL does not calcify in the physiological state even thought it exists between two calcified tissues, namely, the cementum of the root and alveolar bone. Two situations that require PDL regeneration are periodontitis and dental trauma. Periodontitis induces the loss of PDL and alveolar bone due to inflammation related to infection. Conversely, in PDLs damaged by dental trauma, accelerating bone formation as an overreaction of the healing process is induced, thereby inducing dentoalveolar ankylosis at the tooth root surface. PDL regeneration following dental trauma must therefore be considered separately from periodontitis. Therefore, PDL regeneration in dental trauma must be considered separately from periodontitis. This review focuses on the components involved in avoiding dentoalveolar ankylosis, including oxytalan fibers, aggregated microfibrils, epithelial cell rests of Malassez (ERM), and TGF-β signaling. During root development, oxytalan fibers produced by PDL cells work in collaboration with the epithelial components in the PDL (e.g., Hertwig's root sheath [HERS] and ERM). We herein describe the functions of oxytalan fibers, ERM, and TGF-β signals which are involved in the avoidance of bone formation.

Extracellular Matrix-Oriented Proteomic Analysis of Periodontal Ligament Under Mechanical Stress

The periodontal ligament (PDL) is a specialized connective tissue that provides structural support to the tooth and is crucial for oral functions. The mechanical properties of the PDL are mainly derived from the tissue-specific composition and structural characteristics of the extracellular matrix (ECM). The ECM also plays key roles in determining cell fate in the cellular microenvironment thus crucial in the PDL tissue homeostasis. In the present study, we determined the comprehensive ECM profile of mouse molar PDL using laser microdissection and mass spectrometry-based proteomic analysis with ECM-oriented data curation. Additionally, we evaluated changes in the ECM proteome under mechanical loading using a mouse orthodontic tooth movement (OTM) model and analyzed potential regulatory networks using a bioinformatics approach. Proteomic changes were evaluated in reference to the novel second harmonic generation (SHG)-based fiber characterization. Our ECM-oriented proteomics approach succeeded in illustrating the comprehensive ECM profile of the mouse molar PDL. We revealed the presence of type II collagen in PDL, possibly associated with the load-bearing function upon occlusal force. Mechanical loading induced unique architectural changes in collagen fibers along with dynamic compositional changes in the matrisome profile, particularly involving ECM glycoproteins and matrisome-associated proteins. We identified several unique matrisome proteins which responded to the different modes of mechanical loading in PDL. Notably, the proportion of type VI collagen significantly increased at the mesial side, contributing to collagen fibrogenesis. On the other hand, type XII collagen increased at the PDL-cementum boundary of the distal side. Furthermore, a multifaceted bioinformatics approach illustrated the potential molecular cues, including PDGF signaling, that maintain ECM homeostasis under mechanical loading. Our findings provide fundamental insights into the molecular network underlying ECM homeostasis in PDL, which is vital for clinical diagnosis and development of biomimetic tissue-regeneration strategies.

A Review of In Vivo and Clinical Studies Applying Scaffolds and Cell Sheet Technology for Periodontal Ligament Regeneration

Different approaches to develop engineered scaffolds for periodontal tissues regeneration have been proposed. In this review, innovations in stem cell technology and scaffolds engineering focused primarily on Periodontal Ligament (PDL) regeneration are discussed and analyzed based on results from pre-clinical in vivo studies and clinical trials. Most of those developments include the use of polymeric materials with different patterning and surface nanotopography and printing of complex and sophisticated multiphasic composite scaffolds with different compartments to accomodate for the different periodontal tissues' architecture. Despite the increased effort in producing these scaffolds and their undoubtable efficiency to guide and support tissue regeneration, appropriate source of cells is also needed to provide new tissue formation and various biological and mechanochemical cues from the Extraccellular Matrix (ECM) to provide biophysical stimuli for cell growth and differentiation. Cell sheet engineering is a novel promising technique that allows obtaining cells in a sheet format while preserving ECM components. The right combination of those factors has not been discovered yet and efforts are still needed to ameliorate regenerative outcomes towards the functional organisation of the developed tissues.

An Evaluation of Different 3D Cultivation Models on Expression Profiles of Human Periodontal Ligament Fibroblasts with Compressive Strain

The effects of compressive strain during orthodontic treatment on gene expression profiles of periodontal ligament fibroblasts (PDLFs) have mostly been studied in 2D cell culture. However, cells behave differently in many aspects in 3D culture. Therefore, the effect of pressure application on PDLFs in different 3D structures was investigated. PDLFs were either conventionally seeded or embedded into different 3D structures (spheroids, Mebiol^® gel, 3D scaffolds) and exposed to compressive force or incubated without pressure. For one 3D scaffold (POR), we also tested the effect of different compressive forces and application times. Expression of an angiogenic gene (VEGF), a gene involved in extracellular matrix synthesis (COL1A2), inflammatory genes (IL6, PTGS2), and genes involved in bone remodelling (OPG, RANKL) were investigated by RT-qPCR. Depending on the used 3D cell culture model, we detected different effects of compressive strain on expression profiles of PDLFs. COL1A2 was downregulated in all investigated 3D culture models. Angiogenetic and proinflammatory genes were regulated differentially between models. In 3D scaffolds, regulation of bone-remodelling genes upon compressive force was contrary to that observed in 3D gels. 3D cell culture models provide better approximations to in vivo physiology, compared with conventional 2D models. However, it is crucial which 3D structures are used, as these showed diverse effects on the expression profiles of PDLFs during mechanical strain.

Single Cell RNA Sequencing Reveals Critical Functions of Mkx in Periodontal Ligament Homeostasis

The periodontal ligament (PDL) comprises a fibrous tissue that connects teeth to alveolar bone and is essential for periodontal function. The transcription factor mohawk homeobox (Mkx) is expressed in the PDL where it plays an important role in the development and maintenance of the PDL. However, the precise and critical functions of Mkx in the cell populations comprising PDL have not yet been elucidated. The present study aimed to clarify the effects of a Mkx deficiency on PDL cellular heterogeneity and differences between gene expression in PDL tissues from wild-type (WT) (Mkx^+/+) and Mkx knockout (Mkx^−/−) rats using single-cell RNA sequencing. We identified 12 cell clusters comprising mesenchymal cells and macrophages. The expression of Mkx and scleraxis (Scx; another key transcription factor of PDL), was mutually exclusive, and partitioned mesenchymal cell clusters into Mkx and Scx types that dominantly expressed proteoglycans and elastic fibers, and type 1 and 3 collagen, respectively. Ossification-related genes were upregulated in mesenchymal cell and osteoblast clusters with more Mkx^−/− than Mkx^+/+ PDLs. Increased number of cells and inflammatory mediators were observed in macrophage clusters of Mkx^−/− PDL. These results suggested that Mkx plays an important role in maintaining PDL homeostasis by regulating specific cell populations and gene expression.

Energy Metabolism in Osteogenic Differentiation and Reprogramming: A Possible Future Strategy for Periodontal Regeneration

Energy metabolism is crucial in stem cells as they harbor various metabolic pathways depending on their developmental stages. Moreover, understanding the control of their self-renewal or differentiation via manipulation of their metabolic state may yield novel regenerative therapies. Periodontal ligament (PDL) cells existing between the tooth and alveolar bone are crucial for maintaining homeostasis in the periodontal tissue. In addition, they play a pivotal role in periodontal regeneration, as they possess the properties of mesenchymal stem cells and are capable of differentiating into osteogenic cells. Despite these abilities, the treatment outcome of periodontal regenerative therapy remains unpredictable because the biological aspects of PDL cells and the mechanisms of their differentiation remain unclear. Recent studies have revealed that metabolism and factors affecting metabolic pathways are involved in the differentiation of PDL cells. Furthermore, understanding the metabolic profile of PDL cells could be crucial in manipulating the differentiation of PDL cells. In this review, first, we discuss the energy metabolism in osteoblasts and stem cells to understand the metabolism of PDL cells. Next, we summarize the metabolic preferences of PDL cells during their maintenance and cytodifferentiation. The perspectives discussed have potential applicability for creating a platform for reliable regenerative therapies for periodontal tissue.

Tissue Engineered Neurovascularization Strategies for Craniofacial Tissue Regeneration

Craniofacial tissue injuries, diseases, and defects, including those within bone, dental, and periodontal tissues and salivary glands, impact an estimated 1 billion patients globally. Craniofacial tissue dysfunction significantly reduces quality of life, and successful repair of damaged tissues remains a significant challenge. Blood vessels and nerves are colocalized within craniofacial tissues and act synergistically during tissue regeneration. Therefore, the success of craniofacial regenerative approaches is predicated on successful recruitment, regeneration, or integration of both vascularization and innervation. Tissue engineering strategies have been widely used to encourage vascularization and, more recently, to improve innervation through host tissue recruitment or prevascularization/innervation of engineered tissues. However, current scaffold designs and cell or growth factor delivery approaches often fail to synergistically coordinate both vascularization and innervation to orchestrate successful tissue regeneration. Additionally, tissue engineering approaches are typically investigated separately for vascularization and innervation. Since both tissues act in concert to improve craniofacial tissue regeneration outcomes, a revised approach for development of engineered materials is required. This review aims to provide an overview of neurovascularization in craniofacial tissues and strategies to target either process thus far. Finally, key design principles are described for engineering approaches that will support both vascularization and innervation for successful craniofacial tissue regeneration.

Analysis of the cells isolated from epithelial cell rests of Malassez through single-cell limiting dilution

The epithelial cell rests of Malassez (ERM) are essential in preventing ankylosis between the alveolar bone and the tooth (dentoalveolar ankylosis). Despite extensive research, the mechanism by which ERM cells suppress ankylosis remains uncertain; perhaps its varied population is to reason. Therefore, in this study, eighteen unique clones of ERM (CRUDE) were isolated using the single-cell limiting dilution and designated as ERM 1-18. qRT-PCR, ELISA, and western blot analyses revealed that ERM-2 and -3 had the highest and lowest amelogenin expression, respectively. Mineralization of human periodontal ligament fibroblasts (HPDLF) was reduced in vitro co-culture with CRUDE ERM, ERM-2, and -3 cells, but recovered when an anti-amelogenin antibody was introduced. Transplanted rat molars grown in ERM-2 cell supernatants produced substantially less bone than those cultured in other cell supernatants; inhibition was rescued when an anti-amelogenin antibody was added to the supernatants. Anti-Osterix antibody staining was used to confirm the development of new bones. In addition, next-generation sequencing (NGS) data were analysed to discover genes related to the distinct roles of CRUDE ERM, ERM-2, and ERM-3. According to this study, amelogenin produced by ERM cells helps to prevent dentoalveolar ankylosis and maintain periodontal ligament (PDL) space, depending on their clonal diversity.

Functional Adaptation of LPS-affected Dentoalveolar Fibrous Joints in Rats

INTRODUCTION

The functional interplay between cementum of the root and alveolar bone of the socket is tuned by a uniquely positioned 70-80 µm wide fibrous and lubricious ligament in a dentoalveolar joint (DAJ). In this study, structural and biomechanical properties of the DAJ, periodontal ligament space (PDL-space also known as the joint space), alveolar bone of the socket, and cementum of the tooth root that govern the biomechanics of a lipopolysaccharide (LPS)-affected DAJ were mapped both in space and time.

METHODS

The hemi-maxillae from 20 rats (4 control at 6 weeks of age, 4 control and 4 LPS-affected at 12 weeks of age, 4 control and 4 LPS-affected at 16 weeks of age) were investigated using a hybrid technique; micro-X-ray computed tomography (5 µm resolution) in combination with biomechanical testing in situ. Temporal variations in bone and cementum volume fractions were evaluated. Trends in mineral apposition rates (MAR) in additional six Sprague Dawley rats (3 controls, 3 LPS-affected) were revealed by transforming spatial fluorochrome signals to functional growth rates (linearity factor - RW) of bone, dentin, and cementum using a fast Fourier transform on fluorochrome signals from 100-µm hemi-maxillae sections.

RESULTS

An overall change in LPS-affected DAJ biomechanics (a 2.5-4.5X increase in tooth displacement and 2X tooth rotation at 6 weeks, no increase in displacement and a 7X increase in rotation at 12 weeks; 27% increase in bone effective strain at 6 weeks and 11% at 12 weeks relative to control) was associated with structural changes in the coronal regions of the DAJ (15% increase in PDL-space from 0 to 6 weeks but only 5% from 6 to 12 weeks compared to control). A significant increase (p < 0.05) in PDL-space between ligated and age-matched control was observed. The bone fraction of ligated at 12 weeks was significantly lower than its age-matched control, and no significant differences (p > 0.05) between groups were observed at 6 weeks. Cementum in the apical regions grew faster but nonlinearly (11% and 20% increase in cementum fraction (CF) at 6 and 12 weeks) compared to control. Alveolar bone revealed site-specific nonlinear growth with an overall increase in MAR (108.5 µm/week to 126.7 µm/week after LPS treatment) compared to dentin (28.3 µm/week in control vs. 26.1 µm/week in LPS-affected) and cementum (126.5 µm/week in control vs. 119.9 µm/week in LPS-affected). A significant increase in CF (p < 0.05) in ligated specimens was observed at 6 weeks of age.

CONCLUSIONS

Anatomy-specific responses of cementum and bone to the mechano-chemo stimuli, and their collective temporal contribution to observed changes in PDL-space were perpetuated by altered tooth movement. Data highlight the "resilience" of DAJ function through the predominance of nonlinear growth response of cementum, changes in PDL-space, and bone architecture. Despite the significant differences in bone and cementum architectures, data provided insights into the reactionary effects of cementum as a built-in compensatory mechanism to reestablish functional competence of the DAJ. The spatial shifts in architectures of alveolar bone and cementum, and consequently ligament space, highlight adaptations farther away from the site of insult, which also is another novel insight from this study. These adaptations when correlated within the context of joint function (biomechanics) illustrate that they are indeed necessary to sustain DAJ function albeit being pathological.

Primate body mass and dietary correlates of tooth root surface area

OBJECTIVES

This study aims to examine primate postcanine tooth root surface area (TRSA) in the context of two ecological variables (diet and bite force). We also assess scaling relationships within distinct taxonomic groups and across the order as a whole.

MATERIALS AND METHODS

Mandibular postcanine TRSA was measured using a three-dimensional computed tomography (CT) method for catarrhine (N = 27), platyrrhine (N = 21), and strepsirrhine (N = 24) taxa; this represents the first sample of strepsirrhines. Two different body size proxies were used: cranial geometric mean (GM) using nine linear measurements, and literature-derived body mass (BM).

RESULTS

TRSA correlated strongly with body size, scaling with positive allometry or isometry across the order as a whole; however, scaling differed significantly between taxa for some teeth. Among Strepsirrhini, molar TRSA relative to GM differed significantly between folivores and pliant-object feeders. Additionally, P₄ TRSA relative to BM differentiated folivores from both hard- and pliant-object feeders. Among Cercopithecoidea, P₄ TRSA adjusted by GM differed between hard- and pliant-object feeders.

DISCUSSION

Dietary signals in TRSA appear primarily driven by high frequency loading experienced by folivores. Stronger and more frequent dietary signals were observed within Strepsirrhini relative to Haplorhini. This may reflect the constraints of orthognathism within the latter, constraining the adaptability of their postcanine teeth. Finally, because of the strong correlation between TRSA and BM for each tooth locus (mean r²  = 0.82), TRSA can be used to predict BM in fossil primates using provided equations.

Activin A Promotes Osteoblastic Differentiation of Human Preosteoblasts through the ALK1-Smad1/5/9 Pathway

Activin A, a member of transforming growth factor-β superfamily, is involved in the regulation of cellular differentiation and promotes tissue healing. Previously, we reported that expression of activin A was upregulated around the damaged periodontal tissue including periodontal ligament (PDL) tissue and alveolar bone, and activin A promoted PDL-related gene expression of human PDL cells (HPDLCs). However, little is known about the biological function of activin A in alveolar bone. Thus, this study analyzed activin A-induced biological functions in preosteoblasts (Saos2 cells). Activin A promoted osteoblastic differentiation of Saos2 cells. Activin receptor-like kinase (ALK) 1, an activin type I receptor, was more strongly expressed in Saos2 cells than in HPDLCs, and knockdown of ALK1 inhibited activin A-induced osteoblastic differentiation of Saos2 cells. Expression of ALK1 was upregulated in alveolar bone around damaged periodontal tissue when compared with a nondamaged site. Furthermore, activin A promoted phosphorylation of Smad1/5/9 during osteoblastic differentiation of Saos2 cells and knockdown of ALK1 inhibited activin A-induced phosphorylation of Smad1/5/9 in Saos2 cells. Collectively, these findings suggest that activin A promotes osteoblastic differentiation of preosteoblasts through the ALK1-Smad1/5/9 pathway and could be used as a therapeutic product for the healing of alveolar bone as well as PDL tissue.

Effects of acute pain and strain of the periodontium due to orthodontic separation on the occlusal tactile acuity of healthy individuals

OBJECTIVES

The aim of this study was to assess whether pain and strain of the periodontal ligament (PDL), induced by orthodontic separation, alter the somatosensory ability to perceive small thicknesses between occluding teeth (occlusal tactile acuity, OTA).

METHODS

The OTA was tested at baseline (T0), using 9 aluminum foils (range 8-72 μm), randomly placed between the molar teeth, and 1 sham test (without foil), asking the participants whether they felt the foil between their teeth. Afterwards, orthodontic separators were placed, and subjects were randomly assigned to one of the two experimental groups: Group Pain (GP: 18 males; 14 females mean age 25.22 ± 2.28 years) had separators removed after 24 h; Group Strain (GS: 14 males; 17 females, mean age 24.03 ± 3.06 years) had separators removed after 7 days. The OTA measurement was repeated in both groups immediately after orthodontic separators removal (T1). A within-group comparison (T1 vs T0) was performed for each testing thickness (ANOVA for repeated measurements, with Bonferroni correction for multiple testing) (p < 0.005).

RESULTS

GP showed statistically significant reduction of the OTA at T1, as compared to T0, for the thicknesses 24 μm (p = 0.004) and 32 μm (p = 0.001). No significant reduction was observed in GS (all p > 0.005).

CONCLUSIONS

Acute periodontal pain tends to disturb the tactile ability of the teeth, while strain of the PDL in absence of painful sensation determines a return to OTA baseline values.

CLINICAL RELEVANCE

The reduction of OTA might explain the uncomfortable occlusal sensation referred by patients during acute periodontal pain.

3D Mesoscopic Architecture of a Heterogeneous Cellular Network in the Cementum-Periodontal Ligament-Alveolar Bone Complex

Cell-to-cell communication orchestrates various cell and tissue functions. This communication enables cells to form cellular networks with each other through direct contact via intercellular junctions. Because these cellular networks are closely related to tissue and organ functions, elucidating the morphological characteristics of cellular networks could lead to the development of novel therapeutic approaches. The tooth, periodontal ligament (PDL), and alveolar bone form a complex via collagen fibres. Teeth depend on the co-ordinated activity of this complex to maintain their function, with cellular networks in each of its three components. Imaging methods for three-dimensional (3D) mesoscopic architectural analysis include focused ion beam/scanning electron microscopy (FIB/SEM), which is characterised by its ability to select observation points and acquire data from complex tissue after extensive block-face imaging, without the need to prepare numerous ultrathin sections. Previously, we employed FIB/SEM to analyse the 3D mesoscopic architecture of hard tissue including the PDL, which exists between the bone and tooth root. The imaging results showed that the cementum, PDL, and alveolar bone networks are in contact and form a heterogeneous cellular network. This cellular network may orchestrate mechanical loading-induced remodelling of the cementum-PDL-alveolar bone complex as the remodelling of each complex component is coordinated, as exemplified by tooth movement due to orthodontic treatment and tooth dislocation due to occlusal loss. In this review, we summarise and discuss the 3D mesoscopic architecture of cellular networks in the cementum, PDL, and alveolar bone as observed in our recent mesoscopic and morphological studies.

Inhibition of c-Jun N-terminal kinase signaling promotes osteoblastic differentiation of periodontal ligament stem cells and induces regeneration of periodontal tissues

OBJECTIVES

Few clinical treatments to regenerate periodontal tissue lost due to severe endodontic and periodontal disease have yet been developed. Therefore, the development of new treatment methods for the regeneration of periodontal tissue is expected. The purpose of this study was to investigate the effects of a c-Jun N-terminal kinase (JNK) inhibitor, SP600125, on the osteoblastic differentiation of periodontal ligament stem cells (PDLSCs) in vitro, and the function of SP600125 on the regeneration of alveolar bone in vivo.

DESIGN

Alizarin red S staining, quantitative RT-PCR, and western blotting analysis was performed to determine whether SP600125 affects osteoblastic differentiation of human PDLSCs (HPDLSCs) and bone-related intracellular signaling. The effect of SP600125 on the regeneration of alveolar bone was assessed by using a rat periodontal defect model. The healing of periodontal defects was evaluated using micro-CT scans and histological analysis.

RESULTS

SP600125 promoted the osteoblastic differentiation such as Alizarin red S-positive mineralized nodule formation and the expression of osteoblast-related genes in HPDLSCs under osteogenic conditions. In addition, this inhibitor upregulated the BMP2 expression and the phosphorylation of Smad1/5/8 in HPDLSCs under the same conditions. The inhibition of Smad1/5/8 signaling by LDN193189 suppressed the SP600125-induced osteoblastic differentiation of HPDLSCs. Furthermore, the application of SP600125 promoted the regeneration of not only alveolar bone but also PDL tissue in periodontal defects.

CONCLUSION

This study suggested that inhibition of JNK signaling promotes the osteoblastic differentiation of HPDLSCs through BMP2-Smad1/5/8 signaling, leading to the regeneration of periodontal tissues such as alveolar bone and PDL tissue.

Stem Cell Applications in Periodontal Regeneration

In this review, the authors consider the substantial advances that have been made in recent years in stem cell-based periodontal regeneration. These advances involve identifying dental- and nondental-derived stem cells with the capacity to modulate periodontal regeneration, human clinical trials, and emerging concepts, including cell banking, good manufacturing processes, and overall clinical translation.

Role of transient receptor potential channel 6 in the osteogenesis of periodontal ligament cells

Transient receptor potential channel 6 (TRPC6) is a receptor-operated Ca2+ channel that plays an important role in Ca2+ influx in the majority of non-excitable cells and influences calcium signalling and cellular responses. Therefore, the purpose of the present study was to gain insight into the role of TRPC6 in the osteogenesis of periodontal ligament cells (PDLCs). By western blot and immunohistochemical staining, the protein level of TRPC6 was found to be increased in a time-dependent manner during osteoblastic differentiation of PDLCs. In addition, the TRPC6 inhibitor SKF96365 was used to block the function of TRPC6 and inhibit osteoblastic differentiation of PDLCs. The TRPC6 activator hyperforin dicyclohexylammonium salt (hyperforin DCHA) was used to activate TRPC6 and promote osteoblastic differentiation of PDLCs. In vivo, wild-type mice showed better bone regeneration than TRPC6-/- mice, suggesting that TRPC6 has notable osteogenic induction properties and is important for bone defect repair. In conclusion, the current data demonstrated that TRPC6 plays a significant role in osteoblastic differentiation of PDLCs, suggesting that it may be a promising therapeutic target in osteogenesis.

Histopathological characterization of peri-implant diseases: A systematic review and meta-analysis

OBJECTIVE

To conduct a systematic review of the inflammatory elements in peri-implantitis (PI) and peri-implant mucositis (PM) in comparison with healthy peri-implant tissues (HI) and periodontal disease.

DESIGN

The PubMed, Embase, Web of Science, and Scopus databases were searched up to December 2020. English articles that evaluated human soft tissue biopsies of PI or PM were included. Values reported for the surface area of the infiltrated connective tissue (ICT) were pooled using the random-effect model meta-analysis to estimate the mean (95% CI).

RESULTS

A total of 33 articles were included. Of 30 studies on PI, the majority evidenced significantly increased vascularization and inflammatory cell counts dominated by plasma cells in PI compared with HI. Studies that compared PI with chronic periodontitis primarily reported more severe inflammatory infiltrates in PI. This was confirmed by the meta-analysis results since the surface area of the ICT was significantly larger in PI (p < 0.001). Only seven studies analyzed the PM lesions and reported increased inflammatory infiltrates and vascularization in PM compared with HI. Based on the meta-analysis results, the surface area of the ICT was 3.00 [1.50, 4.51] mm ² in PI and 0.23 [0.02, 0.44] mm ² in PM lesions. Based on the available evidence, presence of foreign body particles considerably increased the inflammatory infiltrate; however, smoking did not have a significant effect.

CONCLUSIONS

There was controversy regarding the prevalence of various inflammatory cell types in peri-implant diseases; however, a considerably high ICT surface area in PI indicates the aggressive nature of the disease.

Immunohistochemical Evaluation of Periodontal Regeneration Using a Porous Collagen Scaffold

(1) Aim: To immunohistochemically evaluate the effect of a volume-stable collagen scaffold (VCMX) on periodontal regeneration. (2) Methods: In eight beagle dogs, acute two-wall intrabony defects were treated with open flap debridement either with VCMX (test) or without (control). After 12 weeks, eight defects out of four animals were processed for paraffin histology and immunohistochemistry. (3) Results: All defects (four test + four control) revealed periodontal regeneration with cementum and bone formation. VCMX remnants were integrated in bone, periodontal ligament (PDL), and cementum. No differences in immunohistochemical labeling patterns were observed between test and control sites. New bone and cementum were labeled for bone sialoprotein, while the regenerated PDL was labeled for periostin and collagen type 1. Cytokeratin-positive epithelial cell rests of Malassez were detected in 50% of the defects. The regenerated PDL demonstrated a larger blood vessel area at the test (14.48% ± 3.52%) than at control sites (8.04% ± 1.85%, p = 0.0007). The number of blood vessels was higher in the regenerated PDL (test + control) compared to the pristine one (p = 0.012). The cell proliferative index was not statistically significantly different in pristine and regenerated PDL. (4) Conclusions: The data suggest a positive effect of VCMX on angiogenesis and an equally high cell turnover in the regenerated and pristine PDL. This VCMX supported periodontal regeneration in intrabony defects.

Although Anatomically Micrometers Apart: Human Periodontal Ligament Cells Are Slightly More Active in Bone Remodeling Than Alveolar Bone Derived Cells

The periodontal ligament (PDL) and the alveolar bone are part of the periodontium, a complex structure that supports the teeth. The alveolar bone is continuously remodeled and is greatly affected by several complex oral events, like tooth extraction, orthodontic movement, and periodontitis. Until now, the role of PDL cells in terms of osteogenesis and osteoclastogenesis has been widely studied, whereas surprisingly little is known about the bone remodeling capacity of alveolar bone. Therefore, the purpose of this study was to compare the biological character of human alveolar bone cells and PDL cells in terms of osteogenesis and osteoclastogenesis in vitro. Paired samples of PDL cells and alveolar bone cells from seven patients with compromised general and oral health were collected and cultured. Bone A (early outgrowth) and bone B (late outgrowth) were included. PDL, bone A, bone B cell cultures all had a fibroblast appearance with similar expression pattern of six mesenchymal markers. These cultures were subjected to osteogenesis and osteoclastogenesis assays. For osteoclastogenesis assays, the cells were co-cultured with peripheral blood mononuclear cells, a source for osteoclast precursor cells. The total duration of the experiments was 21 days. Osteogenesis was slightly favored for PDL compared to bone A and B as shown by stronger Alizarin red staining and higher expression of RUNX2 and Collagen I at day 7 and for ALP at day 21. PDL induced approximately two times more osteoclasts than alveolar bone cells. In line with these findings was the higher expression of cell fusion marker DC-STAMP in PDL-PBMC co-cultures compared to bone B at day 21. In conclusion, alveolar bone contains remodeling activity, but to a different extent compared to PDL cells. We showed that human alveolar bone cells can be used as an in vitro model to study bone remodeling.

In Vivo Evaluation of Decellularized Human Tooth Scaffold for Dental Tissue Regeneration

Conventional root canal treatment may result in loss of tooth vitality, which can lead to unfavorable treatment outcomes. Notably, a ceased tooth development of immature permanent teeth with open apices, regeneration of periodontal ligaments (PDL), and pulp is highly expected healing process. For regeneration, the scaffold is one of the critical components that carry biological benefits. Therefore, this study evaluated a decellularized human tooth as a scaffold for the PDL and pulp tissue regeneration. A tooth scaffold was fabricated using an effective decellularization method as reported in previous studies. PDL stem cells (PDLSCs) and dental pulp stem cells (DPSCs) obtained from human permanent teeth were inoculated onto decellularized scaffolds, then cultured to transplant into immunosuppressed mouse. After 9 weeks, PDLSCs and DPSCs that were inoculated onto decellularized tooth scaffolds and cultured in an in vivo demonstrated successful differentiation. In PDLSCs, a regeneration of the cementum/PDL complex could be expected. In DPSCs, the expression of genes related to revascularization and the hard tissue regeneration showed the possibility of pulp regeneration. This study suggested that the potential possible application of decellularized human tooth could be a scaffold in regeneration PDL and pulp tissue along with PDLSCs and DPSCs, respectively, as a novel treatment method.

Mkx regulates the orthodontic tooth movement via osteoclast induction

INTRODUCTION

The periodontal ligament (PDL) plays an important role in orthodontic tooth movement; however, the underlying molecular mechanism remains unclear. We have previously reported that the Mohawk homeobox (Mkx), a tendon-specific transcription factor, is expressed in the PDL and regulates its homeostasis.

MATERIALS AND METHODS

In the present study, we examined the role of Mkx in orthodontic tooth movement via bone remodeling induced by mechanical stimulation in Mkx-deficient rats, which are widely used as experimental animals for orthodontic force application. Orthodontic tooth movement of the maxillary first molar was performed in 7-week-old male Mkx-deficient rats (n = 4) and wild-type Wistar rats (n = 4) using coil springs for 14 days. Hematoxylin and eosin (H&E) staining and tartrate-resistant acid phosphatase (TRAP) staining were performed to evaluate morphological changes and osteoclasts. Furthermore, changes in the expression of receptor activator nuclear factor-kappa B ligand (RANKL) were demonstrated using immunostaining.

RESULTS

The amount of tooth movement was significantly lower in Mkx-deficient rats than in wild-type rats. The number of TRAP-positive cells was suppressed in Mkx-deficient rats on the compression side.

CONCLUSION

Orthodontic tooth movement experiments in Mkx-deficient rats suggested that Mkx is involved in osteoclast induction at the alveolar bone surface on the compression side. This study reveals the possibility that Mkx plays a mechanosensory role in orthodontic tooth movement by inducing RANKL expression and osteoclastogenesis.

MMPs and TIMPs Expression Levels in the Periodontal Ligament during Orthodontic Tooth Movement: A Systematic Review of In Vitro and In Vivo Studies

Background: During orthodontic tooth movement (OTM), applied orthodontic forces cause an extensive remodeling of the extracellular matrix (ECM) in the periodontal ligament (PDL). This is mainly orchestrated by different types of matrix metalloproteinases (MMPs) and their tissue inhibitors of matrix metalloproteinases (TIMPs), which are both secreted by periodontal ligament (PDL) fibroblasts. Multiple in vitro and in vivo studies already investigated the influence of applied orthodontic forces on the expression of MMPs and TIMPs. The aim of this systematic review was to explore the expression levels of MMPs and TIMPs during OTM and the influence of specific orthodontic force-related parameters. Methods: Electronic article search was performed on PubMed and Web of Science until 31 January 2021. Screenings of titles, abstracts and full texts were performed according to PRISMA, whereas eligibility criteria were defined for in vitro and in vivo studies, respectively, according to the PICO schema. Risk of bias assessment for in vitro studies was verified by specific methodological and reporting criteria. For in vivo studies, risk of bias assessment was adapted from the Joanna Briggs Institute Critical Appraisal Checklist for analytical cross-sectional study. Results: Electronic article search identified 3266 records, from which 28 in vitro and 12 in vivo studies were included. The studies showed that orthodontic forces mainly caused increased MMPs and TIMPs expression levels, whereas the exact effect may depend on various intervention and sample parameters and subject characteristics. Conclusion: This systematic review revealed that orthodontic forces induce a significant effect on MMPs and TIMPs in the PDL. This connection may contribute to the controlled depletion and formation of the PDLs' ECM at the compression and tension site, respectively, and finally to the highly regulated OTM.

Therapeutic potential of periodontal ligament stem cells

Inflammatory periodontal disease known as periodontitis is one of the most common conditions that affect human teeth and often leads to tooth loss. Due to the complexity of the periodontium, which is composed of several tissues, its regeneration and subsequent return to a homeostatic state is challenging with the therapies currently available. Cellular therapy is increasingly becoming an alternative in regenerative medicine/dentistry, especially therapies using mesenchymal stem cells, as they can be isolated from a myriad of tissues. Periodontal ligament stem cells (PDLSCs) are probably the most adequate to be used as a cell source with the aim of regenerating the periodontium. Biological insights have also highlighted PDLSCs as promising immunomodulator agents. In this review, we explore the state of knowledge regarding the properties of PDLSCs, as well as their therapeutic potential, describing current and future clinical applications based on tissue engineering techniques.

Cold Atmospheric Plasma Promotes Regeneration-Associated Cell Functions of Murine Cementoblasts In Vitro

The aim of the study was to examine the efficacy of cold atmospheric plasma (CAP) on the mineralization and cell proliferation of murine dental cementoblasts. Cells were treated with CAP and enamel matrix derivates (EMD). Gene expression of alkaline phosphatase (ALP), bone gamma-carboxyglutamate protein (BGLAP), periostin (POSTN), osteopontin (OPN), osterix (OSX), collagen type I alpha 1 chain (COL1A1), dentin matrix acidic phosphoprotein (DMP)1, RUNX family transcription factor (RUNX)2, and marker of proliferation Ki-67 (KI67) was quantified by real-time PCR. Protein expression was analyzed by immunocytochemistry and ELISA. ALP activity was determined by ALP assay. Von Kossa and alizarin red staining were used to display mineralization. Cell viability was analyzed by XTT assay, and morphological characterization was performed by DAPI/phalloidin staining. Cell migration was quantified with an established scratch assay. CAP and EMD upregulated both mRNA and protein synthesis of ALP, POSTN, and OPN. Additionally, DMP1 and COL1A1 were upregulated at both gene and protein levels. In addition to upregulated RUNX2 mRNA levels, treated cells mineralized more intensively. Moreover, CAP treatment resulted in an upregulation of KI67, higher cell viability, and improved cell migration. Our study shows that CAP appears to have stimulatory effects on regeneration-associated cell functions in cementoblasts.

Experimental repeatability, sensitivity, and reproducibility of force and strain measurements from within the periodontal ligament space during ex vivo swine tooth loading

The Periodontal Ligament (PDL) is a complex connective tissue that anchors a tooth to the surrounding alveolar bone. The small size and complex geometry of the PDL space within an intact tooth-PDL-bone complex (TPBC) limits strain measurements. An in-fiber Bragg grating (FBG) sensor offers potential for such measurements due to its small size. This work defines an experimental procedure where strain and force were measured during quasi-static, apically directed, displacement-controlled tests on swine premolar crowns. Specifically, the: inter-TPBC, intra-TPBC, and long-term repeatability after a preconditioned state was objectively identified; sensitivity to preload magnitude, TPBC alignment, and sensor depth; and reproducibility within a TPBC was determined. Data clustering was used to determine the appropriate number of preconditioning trials, ranging from one to seven. Strain and force measurements showed intra-TPBC repeatability with average adjusted root mean square from the median of 28.9% of the peak strain and 4.5% of the peak force measurement. A Mann-Whitney U test generally found statistically significant differences in peak strain and force measurements between the left and right sides, suggesting a lack of inter-TPBC repeatability. Using a Friedman test, it was shown that peak strain measures were sensitive to the TPBC alignment and sensor depth, while peak force measures were sensitive to the preload and TPBC alignment. A Friedman test suggested reproducible strain and force measurements when the FBG was replaced within the same TPBC and the preload, alignment, and sensor depth were controlled.

Development and initial testing of an in vitro model simulating class II furcation defects

OBJECTIVE

To compare surface topography of porcine and human root dentin and to develop a new in vitro model for class II furcation defects. The hypothesis for this study was that porcine mandible blocks can function as a model for class II furcation defects.

BACKGROUND

Treatment of mandibular class II furcation defects is unpredictable. There is a need for in vitro models to investigate new treatment methods.

METHODS

A model to investigate the surface topography of porcine and human root dentin was developed and the two tissues compared by SEM imaging and profilometer. A novel method for studying class II furcation defects was then tested. Blocks of porcine mandibles with molar 3 were prepared. Buccal class II furcation defects were created. The furcation area was isolated and bioluminescent Staphylococcus epidermidis Xen43 was used to form a biofilm in the furcation area to test the functionality of the novel furcation model.

RESULTS

Micromechanical damage caused by debridement on porcine and human root dentin showed similar pattern. No significant difference in the surface morphological parameters was observed between the corresponding porcine and human samples. The model allowed for assessment of the root surface inside the furcation area. While the number of viable bacteria in the furcation following debridement could be quantified, no significant difference between the treatment groups was detected, likely due to bacterial colonization within the periodontal ligament space.

CONCLUSION

Porcine and human root dentin show similar surface topography following surface debridement. Porcine mandible blocks can function as a model for class II furcation defects. However, further development and refinement of the novel in vitro model is warranted.

Guidelines for Micro-Computed Tomography Analysis of Rodent Dentoalveolar Tissues

Micro–computed tomography (μCT) has become essential for analysis of mineralized as well as nonmineralized tissues and is therefore widely applicable in the life sciences. However, lack of standardized approaches and protocols for scanning, analyzing, and reporting data often makes it difficult to understand exactly how analyses were performed, how to interpret results, and if findings can be broadly compared with other models and studies. This problem is compounded in analysis of the dentoalveolar complex by the presence of four distinct mineralized tissues: enamel, dentin, cementum, and alveolar bone. Furthermore, these hard tissues interface with adjacent soft tissues, the dental pulp and periodontal ligament (PDL), making for a complex organ. Drawing on others' and our own experience analyzing rodent dentoalveolar tissues by μCT, we introduce techniques to successfully analyze dentoalveolar tissues with similar or disparate compositions, densities, and morphological characteristics. Our goal is to provide practical guidelines for μCT analysis of rodent dentoalveolar tissues, including approaches to optimize scan parameters (filters, voltage, voxel size, and integration time), reproducibly orient samples, define regions and volumes of interest, segment and subdivide tissues, interpret findings, and report methods and results. We include illustrative examples of analyses performed on genetically engineered mouse models with phenotypes in enamel, dentin, cementum, and alveolar bone. The recommendations are designed to increase transparency and reproducibility, promote best practices, and provide a basic framework to apply μCT analysis to the dentoalveolar complex that can also be extrapolated to a variety of other tissues of the body. © 2021 The Authors. JBMR Plus published by Wiley Periodicals LLC. on behalf of American Society for Bone and Mineral Research.

Tissue Engineering for Periodontal Ligament Regeneration: Biomechanical Specifications

The periodontal biomechanical environment is very difficult to investigate. By the complex geometry and composition of the periodontal ligament (PDL), its mechanical behavior is very dependent on the type of loading (compressive versus tensile loading; static versus cyclic loading; uniaxial versus multiaxial) and the location around the root (cervical, middle, or apical). These different aspects of the PDL make it difficult to develop a functional biomaterial to treat periodontal attachment due to periodontal diseases. This review aims to describe the structural and biomechanical properties of the PDL. Particular importance is placed in the close interrelationship that exists between structure and biomechanics: the PDL structural organization is specific to its biomechanical environment, and its biomechanical properties are specific to its structural arrangement. This balance between structure and biomechanics can be explained by a mechanosensitive periodontal cellular activity. These specifications have to be considered in the further tissue engineering strategies for the development of an efficient biomaterial for periodontal tissues regeneration.

Three-Dimensional Evaluation on Cortical Bone During Orthodontic Surgical Treatment

Adult patients' severe malocclusions, especially the skeletal ones, cannot be exclusively solved by the orthodontic treatment and therefore a combined orthodontic-surgical treatment is necessary. Today, numerous software allows to plane and to visualize the final treatment results simulating the best therapeutic option. This is a retrospective experimental study that aims to analyze the changes in the buccal cortical bone in patients undergoing orthodontics surgeries and to evaluate the correlation between the dental movement and the changes in the relative bone cortex. The study sample consists of 32 subjects. By applying the CBCT radiographic examinations, the measurements were made in well-defined points of reference. The 3D study of the dental changes of position and the cortical buccal bone related variation, suggests how the determined orthodontic movement of the dental element does not achieve an easily predictable bone variation. Therefore, it also suggests that there is no direct proportionality relationship between the extent of bone apposition/reabsorption and dental movement.

A Review of the Functions of Matrix Vesicles in Periodontal Tissues

Periodontal tissues consist of cementum, periodontal ligaments, and alveolar bone, which provide indispensable support for physiological activities involving mastication, swallowing, and pronunciation. The formation of periodontal tissues requires a complex process, during which a close relationship with biomineralization is noticeable. Alveolar bone and cementum are physically hard, both of which are generated from biomineralization and possess the exact mechanical properties resembling other hard tissues. However, when periodontitis, congenital abnormalities, periapical diseases, and other pathological conditions affect the organism, the most common symptom, alveolar bone defect, is always unavoidable, which results in difficulties for current clinical treatment. Thus, exploring effective therapies to improve the prognosis is important. Matrix vesicles (MVs), a special subtype of extracellular vesicles related to histogenesis, are widely produced by the stem cells of developing hard tissues. With the assistance of the enzymes and transporters contained within them, MVs can construct the extracellular matrix and an adequate microenvironment, thus promoting biomineralization and periodontal development. Presently, MVs can be effectively extracted and delivered by scaffolds and generate hard tissues in vitro and in vivo, which are expected to be translated into therapies for alveolar bone defects. In this review, we generalize recent research progress on MV morphology, molecular composition, biological mechanism, and, in particular, the biological functions in periodontal development. In addition to the above unique roles of MVs, we further describe the available MV-related biotechnologies and achievements that make them promising for coping with existing problems and improving the treatment of alveolar bone defects.