A similar pattern of interaction for different antibodies with a major antigenic site of foot-and-mouth disease virus: implications for intratypic antigenic variation

Biochemical and structural studies with neutralizing antibodies raised against foot-and-mouth disease virus

The function of a loop exposed on the aphthovirus capsid (the G-H loop of protein VP1) has been explored by combining genetic and structural studies with viral mutants. The loop displays a dual function of receptor recognition and interaction with neutralizing antibodies. Remarkably, some amino acid residues play a critical role in both such disparate functions. Therefore residues subjected to antibody pressure for variation may nevertheless maintain a role in receptor recognition for which invariance is a requirement. Evolution of FMDV in cell culture may relax the requirements at this site and allow further increase of antigenic diversification. Essential residues at one stage of virus evolution may become dispensable at another not very distant point in the evolutionary landscape. Implications for FMDV evolution and vaccine design are discussed.

Antigenic properties and population stability of a foot-and-mouth disease virus with an altered Arg-Gly-Asp receptor-recognition motif

The antigenic properties and genetic stability of a multiply passaged foot-and-mouth disease virus (FMDV) clone C-S8c1 with an Arg-Gly-Gly triplet (RGG) instead of the Arg-Gly-Asp (RGD) integrin-recognition motif at positions 141 to 143 of capsid protein VP1 are described. Clear antigenic differences between FMDV RGG and clone C-S8c1 have been documented in ELISA, enzyme-linked immunoelectrotransfer (Western) blot and neutralization assays using site A-specific monoclonal antibodies and anti-FMDV polyclonal antibodies from swine and guinea pigs. The results validate with a live virus the role of the RGD (in particular Asp-143) in recognition of (and neutralization by) antibodies, a role previously suggested by immunochemical and structural studies with synthetic peptides. The FMDV RGG was genetically stable in a large proportion of serial infections of BHK-21 cells. However, a revertant virus with RGD was generated in one out of six passage series. Interestingly, this revertant FMDV did not reach dominance but established an equilibrium with its parental FMDV RGG, accompanied by an increase of quasispecies complexity at the sequences around the RGG triplet. FMDV RGG exhibited a selective disadvantage relative to other RGD-containing clones isolated from the same parental FMDV population. The results suggest that large antigenic variations can be prompted by replacements at critical capsid sites, including those involved in receptor recognition. These critical replacements may yield viruses whose stability allows them to replicate efficiently and to expand the sequence repertoire of an antigenic site.

Flexibility of the major antigenic loop of foot-and-mouth disease virus bound to a Fab fragment of a neutralising antibody: structure and neutralisation

The interaction of foot-and-mouth disease virus (FMDV) serotype C (clone C-S8c1) with a strongly neutralising monoclonal antibody (MAb) 4C4 has been studied by combining data from cryoelectron microscopy and x-ray crystallography. The MAb 4C4 binds to the exposed flexible GH-loop of viral protein 1 (VP1), which appears to retain its flexibility, allowing movement of the bound Fab. This is in striking contrast to MAb SD6, which binds to the same GH-loop of VP1 but exhibits no movement of the bound Fab when observed under identical conditions. However, MAbs 4C4 and SD6 have very similar neutralisation characteristics. The known atomic structure of FMDV C-S8c1 and that of the 4C4 Fab cocrystallised with a synthetic peptide corresponding to the GH-loop of VP1 were fitted to the cryoelectron microscope density map. The best fit of the 4C4 Fab is compatible only with monovalent binding of the MAb in agreement with the neutralisation data on 4C4 MAbs, Fab2s, and Fabs. The position of the bound GH-loop is related to other known positions of this loop by a hinge rotation about the base of the loop. The 4C4 Fab appears to interact almost exclusively with the G-H loop of VP1, making no other contacts with the viral capsid.

Multiple molecular pathways for fitness recovery of an RNA virus debilitated by operation of Muller's ratchet

Repeated bottleneck passages of RNA viruses result in fitness losses due to accumulation of deleterious mutations. We have analysed the molecular events underlying fitness recovery of a highly debilitated foot- and-mouth disease virus (FMDV) clone, upon serial passage in BHK-21 cells. The debilitated clone included an unusual, internal polyadenylate extension preceding the second functional AUG initiation codon, and a number of additional mutations scattered throughout the genome. Comparison of entire genomic nucleotide sequences in the course of passaging documented that loss of the internal polyadenylate was the first event in the process of fitness recovery. Further increases of fitness were associated with very few true reversions and with the accumulation of additional mutations affecting non-coding and coding regions. Remarkably, four biological subclones of the same debilitated FMDV clone gained fitness through three separate molecular pathways regarding correction of the internal polyadenylate: (i) a true reversion to yield the wild-type sequence at the second functional AUG; (ii) a shortening of the internal polyadenylate tract; or (iii) a deletion of 69 residues spanning the site of the polyadenylate extension. The results document that an RNA virus can find multiple pathways to reach alternative high fitness peaks on the fitness landscape.

A comparative study of cyclization strategies applied to the synthesis of head-to-tail cyclic analogs of a viral epitope

A family of head-to-tail cyclic peptide models of the antigenic site A (G-H loop of viral protein 1) of foot-and-mouth disease virus has been designed on the basis of the three-dimensional structure adopted by the linear peptide YTASARGDLAHLTTT upon binding to neutralizing monoclonal antibodies. Three different methods of cyclization have been examined to access the peptides. Solution cyclization of a minimally protected linear precursor provided the expected products but required several purification steps that lowered the yields to approximately 10%. The two other approaches relied on side-chain anchoring of the peptide through the Asp residue and cyclization on the solid phase. A synthetic scheme combining Fmoc, tBu and OAI protections was practicable but inefficient when scaled-up. The combination of Boc, Bzl and OFm protections was more promising, but suffered from high epimerization during the initial esterification of Boc-Asp-OFm to benzyl alcohol-type resins. This problem was solved by performing the esterification via the cesium salt of Boc-Asp-OFm. With this improvement, the Boc/Bzl/OFm has become the method of choice for the preparation of cyclic head-to-tail peptides in satisfactory yields and with minimal purification.

Conformational flexibility in a highly mobile protein loop of foot-and-mouth disease virus: distinct structural requirements for integrin and antibody binding

The G-H loop of foot-and-mouth disease virus VP1 protein is a highly mobile peptide, that extends from the capsid surface and that in native virions is invisible by X-ray crystallography. In serotype C, this segment contains a hypervariable region with several continuous, overlapping, B-cell epitopes that embrace the conserved Arg-Gly-Asp (RGD) cell attachment motif. The solvent-exposed positioning of this peptide by selective insertion into different structural frameworks of E. coli beta-galactosidase, generates a spectrum of antigenic variants which react distinctively with a panel of anti-VP1 monoclonal antibodies and exhibit different efficiencies as cell ligands. The cell attachment efficiency is much less restricted by the different positioning of the viral segment at the insertion sites. A molecular model of an inserted stretch reveals a highest flexibility of the RGD tripeptide segment compared with the flanking sequences, that could allow a proper accommodation to integrin receptors even in poorly antigenic conformations. The non-converging structural requirements for RGD-mediated integrin binding and antibody recognition, explains the dynamism of the generation of neutralisation-resistant antigenic variants in the viral quasi-species, arising from a conformational space of integrin-binding competent peptides. This might be of special relevance for foot-and-moth disease virus evolution, since unlike in other picornaviruses, the cell binding motif and the major neutralising B-cell epitopes overlap in a solvent-exposed peptide accessible to the host immune system, in a virion lacking canyons and similar hiding structures.

Multiple virulence determinants of foot-and-mouth disease virus in cell culture

Hypervirulent variants of foot-and-mouth disease virus (FMDV) of serotype C arise upon serial cytolytic or persistent infections in cell culture. A specific mutation in the internal ribosome entry site of persistent FMDV was previously associated with enhanced translation initiation activity that could contribute to the hypervirulent phenotype for BHK-21 cells. Here we report that several hypervirulent FMDV variants arising upon serial cytolytic passage show an invariant internal ribosome entry site but have a number of mutations affecting structural and nonstructural viral proteins. The construction of chimeric type O-type C infectious transcripts has allowed the mapping of a major determinant of hypervirulence to the viral capsid. Tissue culture-adapted FMDV displayed enhanced affinity for heparin, but binding to cell surface heparan sulfate moieties was not required for expression of the hypervirulent phenotype in Chinese hamster ovary (CHO) cells. Virulence was identical or even higher for glycosaminoglycan-deficient CHO cells than for wild-type CHO cells. FMDV variants with decreased affinity for heparin were selected from a high-binding parental population and analyzed. Substitutions associated with decreased heparin binding were located at positions 173 of capsid protein VP3 and 144 of capsid protein VP1. These substitutions had a moderate effect on virulence for BHK-21 cells but completely abrogated infection of CHO cells. The comparative results with several FMDV isolates show that (i) increased affinity for heparin and alterations in cell tropism may be mediated by a number of independent sites on the viral capsid and (ii) the same capsid modifications may have different effects on different cell types.

Mutational analysis of discontinuous epitopes of foot-and-mouth disease virus using an unprocessed capsid protomer precursor

An unprocessed capsid precursor (P1) of foot-and-mouth disease virus (FMDV) has been expressed in mammalian cells to study discontinuous epitopes involved in viral neutralization. Amino acid replacements found in virus-escape mutants were engineered in the P1 precursor by site-directed mutagenesis of the plasmid. In all cases the replacements abolished recognition of unprocessed P1 by the relevant monoclonal antibodies (MAbs), paralleling the effects of the corresponding substitutions in neutralization of infectious FMDV. Five capsid surface residues within the same discontinuous antigenic area that were never found replaced in escape mutants were also engineered in P1. None of the substitutions affected antibody recognition, suggesting that these residues were not directly involved in the interaction with the antibodies tested. The results validate site-directed mutagenesis of constructs encoding capsid precursors as an approach to probe the structure of viral discontinuous epitopes not amenable to analysis with synthetic peptides.