Kinetics, equilibrium and thermodynamics of dyes adsorption onto modified chitosan: a review

In view of promising sorption capacity, stability, biodegradability, cost-effectiveness, environmental friendly nature, regeneration and recycling ability, the chitosan (CS) based adsorbents are highly efficient for the sequestration of dyes. Since CS offers variable chemical structures and CS have been modified by incorporating different moieties. The CS composites with unique properties have been employed successfully for dye adsorption with reasonably high adsorption capacity versus other similar adsorbents. Modifications of CS were promising for the preparation of composites that are extensively studied for their adsorption capacities for various dyes. This review highlights the CS and its modification and their applications for the adsorption of dyes. The removal capacities of CS-based adsorbents, equilibrium modeling, kinetics studies and the thermodynamic characteristics are reported. Moreover, the FTIR, BET, SEM, TGA and XRD were employed for the characterization of CS modified adsorbents are also discussed. Results revealed that the modified CS is highly efficient and can be employed for the sequestration of dyes from effluents.

Kinetics, equilibrium and thermodynamics of dyes adsorption onto modified chitosan: a review

In view of promising sorption capacity, stability, biodegradability, cost-effectiveness, environmental friendly nature, regeneration and recycling ability, the chitosan (CS) based adsorbents are highly efficient for the sequestration of dyes. Since CS offers variable chemical structures and CS have been modified by incorporating different moieties. The CS composites with unique properties have been employed successfully for dye adsorption with reasonably high adsorption capacity versus other similar adsorbents. Modifications of CS were promising for the preparation of composites that are extensively studied for their adsorption capacities for various dyes. This review highlights the CS and its modification and their applications for the adsorption of dyes. The removal capacities of CS-based adsorbents, equilibrium modeling, kinetics studies and the thermodynamic characteristics are reported. Moreover, the FTIR, BET, SEM, TGA and XRD were employed for the characterization of CS modified adsorbents are also discussed. Results revealed that the modified CS is highly efficient and can be employed for the sequestration of dyes from effluents.

The effect of temperature on the structural, dielectric and magnetic properties of cobalt ferrites synthesized via hydrothermal method

A series of cobalt ferrite nanoparticles were prepared using hydrothermal process by varying the reaction temperature. The structural, magnetic and dielectric properties have been studied with the help of X-ray diffractometer (XRD), vibrating sample magnetometer (VSM) and impedance analyzer respectively. XRD spectra of all samples confirmed the formation of cobalt ferrite (CoFe2O4) nanoparticles (NPs). The lattice constant ‘a’ for temperature series samples is averaged around 8.4023 Å. Crystallite size of temperature series is calculated by Debye–Scherer formula that lies in the range of 15.04–20.49 nm. Its values increase because the chance of coalescence increases by increasing temperature. The maximum packing factor is obtained for the sample with highest reaction temperature. From VSM data, we get the M–H hysteresis curves for complete temperature series which confirms the magnetic nature. The maximum saturation magnetization 150.67 emu/g is obtained for the sample prepared at highest temperature. Different magnetic parameter such as saturation magnetization, coercivity, retentivity, squareness ratio, anisotropy constant and magneton number has been calculated from VSM data. AC response of all prepared ferrites was studied with impedance analyzer of frequency range 20 Hz to 20 MHz. Ferrites are the insulating materials, so, eddy current does not induce in transformer cores made of ferrite materials. In the medical field cobalt ferrite is used for drug delivery, as a biosensor and in MRI.

Green Synthesis of Copper Oxide Nanoparticles Using Protein Fractions from an Aqueous Extract of Brown Algae Macrocystis pyrifera

Amongst different living organisms studied as potential candidates for the green synthesis of copper nanoparticles, algal biomass is presented as a novel and easy-to-handle method. However, the role of specific biomolecules and their contribution as reductant and capping agents has not yet been described. This contribution reports a green synthesis method to obtain copper oxide nanoparticles (CuO-NPs) using separated protein fractions from an aqueous extract of brown algae Macrocystis pyrifera through size exclusion chromatography (HPLC-SEC). Proteins were detected by a UV/VIS diode array, time-based fraction collection was carried out, and each collected fraction was used to evaluate the synthesis of CuO-NPs. The characterization of CuO-NPs was evaluated by Dynamic Light Scattering (DLS), Z-potential, Fourier Transform Infrared (FTIR), Transmission Electron Microscope (TEM) equipped with Energy Dispersive X-ray Spectroscopy (EDS) detector. Low Molecular Weight (LMW) and High Molecular Weight (HMW) protein fractions were able to synthesize spherical CuO-NPs. TEM images showed that the metallic core present in the observed samples ranged from 2 to 50 nm in diameter, with spherical nanostructures present in all containing protein samples. FTIR measurements showed functional groups from proteins having a pivotal role in the reduction and stabilization of the nanoparticles. The highly negative zeta potential average values from obtained nanoparticles suggest high stability, expanding the range of possible applications. This facile and novel protein-assisted method for the green synthesis of CuO-NPs may also provide a suitable tool to synthesize other nanoparticles that have different application areas.

Synthesis and characterization of heterostructured nanoparticle for efficient photocatalytic performance for dye degradation

This paper focusses on the synthesis of cobalt vanadate (CoVO4) nanoparticles (NPs) by precipitation method. This was further augmented by assistance from microwave. Nanotechnology has been a wonderful tool with the promising application in different fields of life. The CoVO4 NPs synthesized by microwave assisted precipitation method was characterized by advanced techniques such as X-ray powder diffraction (XRD), Energy dispersive X-ray analysis (EDX), Scanning electron microscopy (SEM), Ultraviolet visible spectroscopy (UV–vis) techniques. Rhodamine B (RhB) dye was used to evaluate the photo catalytic activity (PCA) of NPs by degradation of dye. The conditions were optimized for maximum degradation of dye. The NPs were in the nano flowers form and the size was ≤100 nm. The results regarding degradation of RhB was through PCA were promising; 83% dye was degraded at pH 10, reaction time 160 min and catalyst dose 1 g. It may conclude that the synthesized NPs could further be employed for possible treatment of industrial effluents particularly textile industry.

ZnO, CuO and Fe2O3 green synthesis for the adsorptive removal of direct golden yellow dye adsorption: kinetics, equilibrium and thermodynamics studies

In the present investigation, ZnO, CuO and Fe2O3 were prepared via green route and utilized for the sequestration of DGY (Direct Golden Yellow) dye. Affecting variables i.e., temperature, contact time, adsorbent dose and pH were optimized for maximum sequestration of dye from aqueous medium. The pH 2, adsorbent dose 0.1 g/50 mL dye solution, temperature 30 °C and 50 mg/L dye initial concentration were best levels for efficient dye adsorption and equilibrium was attained in 30 min reaction time. The dye sequestration on to ZnO, CuO and Fe2O3 was an exothermic process. Freundlich and Temkin adsorption isotherms explained well the dye adsorption onto nanoadsorbents and dye adsorption followed pseudo first order kinetic model. Effect of electrolytes and heavy metal ions was also investigated and both affected the adsorption process significantly. In the presences of surfactant/detergent, the removal of dye was reduced and 0.5 N NaOH efficiently desorbed the dye from nanoadsorbents. Findings depicted that the nanoadsorbents are effectual for the sequestration of DGY dye, which can be employed for the remediation of textile effluents.

Kinetic and thermodynamic studies for evaluation of adsorption capacity of fungal dead biomass for direct dye

This study focuses on evaluation of degradation aptitude of white rot fungus (Coriolus versicolor) against Indosol Turquoise FBL dye. The outcome of numerous parameters including pH, temperature, carbon sources, nitrogen sources, C/N ratio and effect of dye concentration were studied. Maximum decolorization (99.896%) of Indosol Turquoise FBL was obtained by C. versicolor under optimized conditions. After three days, the maximum dye degradation (98%) was observed at pH 4 and 30 °C. Six carbon sources fructose, glucose, maltose, sucrose, rice bran and wheat bran were used and 96.66% degradation was observed by maltose at its optimum growth concentration (0.1 g/100 mL). Various nitrogen sources were employed for decolorization but ammonium nitrate decolorized dye up to 98.05%. The activity of three different enzymes laccase, Lignin peroxidase (LiP) and Manganese peroxidase (MnP) were calculated. The dead biomass of White rot fungus (WRF) was used for biosorption experiments. Maximum q (36 mg/g) was obtained at pH 2, at 30 °C using 0.05 g biosorbent. An increase in the q value was observed with increase in dye concentration. Freundlich adsorption isotherm and pseudo second order kinetics were followed by the data. It can be concluded that C. versicolor could be an efficient source for degradation of dyes from industrial effluents.

Gamma and UV radiations induced treatment of anti-cancer methotrexate drug in aqueous medium: Effect of process variables on radiation efficiency evaluated using bioassays

This studystudy focuses on the effect of radiation treatment and hydrogen peroxide (H₂O₂) on the toxicity of anticancer methotrexate. For cytotoxicity, different bioassays such as Allium cepa, hemolytic, brine shrimp were employed. The Ames test was used for mutagenicity analysis. The solutions having concentrations 5, 10 and 15 ppm were irradiated with UV radiation exposure time 15, 30, 45, 60, 75 and 90 min and gamma radiation absorbed doses 0.3, 0.6, 0.9, 1.2, 2, 3 and 4 kGy in combination with with H₂O₂. There was a clear difference observed for aqueous solution before and after treatment with reference to cytotoxicity and mutagenicity. In Allium cepa test, a 47.07, 44.36 and 38.23% increase in root length (RL), root count (RC) and mitotic index (MI) was observed, respectively, for UV/H₂O₂ treatment and in the case of gamma/H₂O₂ treatment, the RL, RC and MI were increased up to 49.39, 52.63 and 52.38%, respectively. Brine shrimp test has shown 85.95 and 91.30% decrease in toxicity using UV/H₂O₂ and gamma/H₂O₂ respectively, while hemolytic test has shown 19.21 and 26.32% hemolysis using UV/H₂O₂ and gamma/H₂O₂, respectively. The mutagenicity reduced up to 82.3, 86.46 and 89.59% (TA98) and 85.42, 87.5 and 90.63% (TA100) for UV/H₂O₂ while 89.59, 90.63 and 93.75% (TA98) and 84.38, 89.59 and 92.71% (TA100) for gamma/H₂O₂. The UV and gamma radiation along with H₂O₂ based AOPs are promising approaches to detoxify the wastewater which can be extended to real hospital liquid effluent effectively.

Kinetic and equilibrium study of (poly amido amine) PAMAM dendrimers for the removal of chromium from tannery wastewater

Water gets polluted by industrial effluents, mainly composed of heavy metals and organic materials. Water soluble heavy metals can be taken up by living organisms. Chromium mainly occurs in the form of chromate and cationic hydroxo complexes in water. Apart from conventional methods of heavy metal removal, there are some novel approaches such as using dendrimers for removal of heavy metal. Dendrimers are extremely branched nano sized polymers with a three-dimensional symmetry around a core that imparts poly functionality. PAMAM (poly amido amine) dendrimers having ethylene diamine as core and methyl acrylate as repeating unit was divergently synthesized. Characterization of PAMAM dendrimers was evaluated by UV–Vis spectroscopy, zeta sizer, scanning electron microscopy (SEM) and Fourier-transform infrared (FT-IR) spectroscopy. Zero generation dendrimers have amine terminal groups, showed intense amide group peak at 1596.76 cm−1. The λ max value was 278 nm. SEM exhibited spherical shape for full generation while needle like structure for −0.5 generation. Evaluation of chromium removal from wastewater has been done by atomic absorption spectroscopy (AAS). The data revealed that optimal removal of Cr occurs at dendrimer concentration of 5 mL, Cr concentration of 300 ppm, contact time of 2 min and pH 7. The synthesized dendrimers have effectively removed Cr from tannery wastewater.

Experimental modeling, optimization and comparison of coagulants for removal of metallic pollutants from wastewater

Wastewater treatment coagulation is one of the most important physicochemical operations used in industry. The adsorption capability of marigold leaf powder, tea waste and ferrous sulfate was investigated for domestic and tannery effluents. These adsorbents significantly affected the pH, electrical conductivity (EC) and turbidity of wastewater. Maximum decrease in all the attributes was observed for 10 g of adsorbents application. All the adsorbents significantly affected the physiochemical attributes of both wastewaters. Similarly, maximum adsorption potential was observed in case of tea waste powder. Maximum decrease in all physiochemical attributes such as pH (15%), EC (21%), turbidity (54%), total dissolved solids (TDS; 36%), total suspended solids (TSS; 43%), total hardness (TH; 52%), chloride contents (59%) and phosphate contents (60%) was observed with the application of 10 g of tea waste. Regarding the heavy metals, maximum decrease for cadmium (Cd; 47%), lead (Pb; 81%), arsenic (As; 44%), copper (Cu; 75%), iron (Fe; 49%), chromium (Cr; 68%) and zinc (Zn; 64%) was observed in same treatment. The decreasing order in terms of their adsorption potential for coagulants was tea waste > marigold leaf powder > ferrous sulfate. However, for the wastewater, the maximum effect of adsorbents was observed in case of domestic wastewater as compared to the tannery water. Based on these data, it is suggested that tea waste has maximum adsorption potential for the remediation of wastewater.

The Effect of Nanosizing on the Oxidation of Partially Oxidized Copper Nanoparticles

Copper nanoparticles are of great interest in various applications, such as catalysis, cooling fluids, conductive inks or for their antibacterial activity. In this paper, the thermal behavior of copper nanoparticles was studied using thermogravimetry, differential thermal analysis and differential scanning calorimetry. Original Cu samples as well as the products of oxidation were analysed by X-ray diffraction, scanning/transmission electron microscopy and energy dispersive spectroscopy. A step-by-step oxidation mechanism during the oxidation of Cu nano-powders was observed. The Cu-nano oxidation starts slightly above 150 °C when bulk copper does not yet react. The dominant oxidation product in the first step is Cu₂O while CuO was identified as the final state of oxidation. Our results confirm an easier oxidation process of Cu-nano than Cu-micro particles, which must be attributed to kinetic not thermodynamic aspects of oxidation reactions.

Structural, electric and dielectric properties of perovskite based nanoparticles for energy applications

A nanocomposite electrode, obtained by combining two high performance perovskite materials, such as lanthanum strontium cobalt ferrite, La0.6Sr0.4Co0.2Fe0.8O3−δ (LSCF) and gadolinium doped ceria, Ce0.85Gd0.15O1.5 (GDC), were investigated as a promising cathode for moderate temperature solid oxide fuel cells (SOFCs). The synthesized material has good conductivity and catalytic performance. The purpose of this synthesis was to prepare a stable and highly performing nanocomposite cathode material. In this research work, LSCF and GDC were separately synthesized by co-precipitation and solid-state reaction method to gain a homogeneous perovskite phase. Varying concentrations of LSCF–GDC composite with GDC (10 wt.%, 20 wt.% and 30 wt.%) were synthesized followed by calcination at 600 °C to remove water content and to achieve an adequate porous structure for oxygen absorption and desorption. These fabricated LSCF, GDC, and the nanocomposite specimens were characterized for microstructure, particle size etc. via. X-ray diffraction method (XRD), scanning electron microscope (SEM) and the laser particle size analyzer. This procedural approach helps to expand new methods for generating bi-functional duel nano-sized perovskites with great performance and stability which can be utilized for advancement of renewable energy sectors especially for rechargeable fuel batteries.

Structural, electric and dielectric properties of perovskite based nanoparticles for energy applications

A nanocomposite electrode, obtained by combining two high performance perovskite materials, such as lanthanum strontium cobalt ferrite, La0.6Sr0.4Co0.2Fe0.8O3−δ (LSCF) and gadolinium doped ceria, Ce0.85Gd0.15O1.5 (GDC), were investigated as a promising cathode for moderate temperature solid oxide fuel cells (SOFCs). The synthesized material has good conductivity and catalytic performance. The purpose of this synthesis was to prepare a stable and highly performing nanocomposite cathode material. In this research work, LSCF and GDC were separately synthesized by co-precipitation and solid-state reaction method to gain a homogeneous perovskite phase. Varying concentrations of LSCF–GDC composite with GDC (10 wt.%, 20 wt.% and 30 wt.%) were synthesized followed by calcination at 600 °C to remove water content and to achieve an adequate porous structure for oxygen absorption and desorption. These fabricated LSCF, GDC, and the nanocomposite specimens were characterized for microstructure, particle size etc. via. X-ray diffraction method (XRD), scanning electron microscope (SEM) and the laser particle size analyzer. This procedural approach helps to expand new methods for generating bi-functional duel nano-sized perovskites with great performance and stability which can be utilized for advancement of renewable energy sectors especially for rechargeable fuel batteries.

Green synthesis of cobalt oxide nanoparticles using Citrus medica leaves extract: characterization and photo-catalytic activity

The study deals with the green and eco-friendly synthesis and characterization of cobalt oxide nanoparticles using leaf extract of Citrus medica plant. The crystalline nature and functional groups analysis of cobalt oxide Nps was confirmed by X-ray diffraction and diffused reflectance infra-red spectroscopy respectively. The band gap of the Nps was calculated using Tauc plot. Scanning microscope analysis was carried out to get an insight to the structural morphology of the catalyst. The catalyst was found to be very active for the degradation of methyl orange dye using a very small amount of catalyst (0.006 g) using ultra violet radiation source. Approximately, 90% of the dye (Initial Conc. 10 mg L−1) was degraded in 60 min at natural pH (6.5). The dye degradation increased with increase in pH of the solution, due to the enhanced production of OH radicals, at higher pH values. Different experimental parameters like catalyst amount, agitation speed, initial pH of the solution, initial concentration of dye and recycling of the catalyst were varied to test the performance of the catalyst.

Coagulation of Metallic Pollutants from Wastewater Using a Variety of Coagulants Based on Metal Binding Interaction Studies

In this study, different organic (moringa and neem leaf powder) and inorganic (alum) coagulants were used for the wastewater treatment. Results revealed that all the coagulants at various doses significantly affected the pH, electrical conductivity (EC) and turbidity of wastewater. The maximum decrease in all the attributes was observed when 10 g of coagulants were used. Similarly, maximum adsorption potential was observed in case of moringa leaf powder. Maximum decrease in all physiochemical attributes such as pH (13%), EC (65%), turbidity (75%), total dissolved solids (TDS; 51%), total suspended solids (TSS; 48%), total hardness (TH; 29%), chloride contents (66%) and phosphate contents (44%) was observed. Regarding the heavy metals, maximum decrease for Cadmium (Cd; 96%), Lead (Pb; 88%), Arsenic (As; 23%), Iron (Fe; 90%), Manganese (Mn; 96%) and Zinc (Zn; 48%) was observed in same treatment. The decreasing order in terms of their adsorption potential for coagulants was moringa leaf powder > Alum > neem leaf powder. However, the maximum effect of coagulants was observed in case of textile wastewater as compared to the hospital wastewater. Based on the analyses, it is concluded that the moringa leaf powder has maximum adsorption potential for the remediation of wastewater.

Hetero-structured Iron Molybdate Nanoparticles: Synthesis, Characterization and Photocatalytic Application

This study focuses on the synthesis of iron molybdate [Fe2(MoO4)3] nanoparticles (NPs) using simple co-precipitation process. The catalyst synthesized was characterized by advanced instrumental techniques such as XRD, SEM, EDX, TGA and FTIR, which confirmed the successful synthesis of NPs. Organic compound Rhodamine B (Rh. B) dye was selected for photo-degradation due to its complex structure and carcinogenic nature. Results exhibited that at neutral pH, the synthesized catalyst is highly effective for the degradation of Rh. B. For 20 mg/L initial concentration with an initial pH of 6.7, the degradation efficiency of Rh. B reaches 98  % within 180 min. Furthermore, the solution pH (1 to 11) affects the catalytic activity. This indicates that at neutral and/or alkaline pH, the usage of iron molybdate overwhelms the efficiency of Fenton-like reaction. It has been observed that Fe2(MoO4)3 showed excellent stability as after recycling it for 9 times its performance remained effective. Based on these data, the synthesized catalyst could be conveniently employed for degradation of toxic pollutants.

Comprehensive facts on dynamic antimicrobial properties of polysaccharides and biomolecules-silver nanoparticle conjugate

Based on progress for the green synthesis of nanoparticle (NPs), the mushrooms have also been utilized extensively for the biogenic synthesis of NPs. In recent years, silver NPs have been fabricated using mushrooms. The antimicrobial drugs are efficient to control the infectious diseases, but due to widespread of drugs, microbes became resistant to drugs, which demands develop of new bioactive agents. The silver NPs have been recognized as efficient broad spectrum antimicrobial agents, which have been fabricated using polysaccharides from mushrooms as reducing and capping agent. This review focused on the comprehensive study that deals silver NPs polysaccharides from Pleurotus mushroom, their synthesis mechanism, action mechanism of silver NPs and their characterization using advanced techniques i.e., ultraviolet-visible (UV-Vis), dynamic light scattering, Fourier transformation infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM) and XRD. The Pleurotus mushroom showed promising efficiency for the biogenic synthesis of polysaccharides‑silver NPS and as-prepared NPs showed excellent antimicrobial activity.

Charcoal Prepared from Bougainvillea spectabilis Leaves as Low Cost Adsorbent: Kinetic and Equilibrium Studies for Removal of Iron from Aqueous Solution

Biosorption is one of the effective technique for removal of metals from aqueous solutions/industrial effluents. Present work is aimed to use low cost and ecofriendly material to remove the iron metal from aqueous solution which could possibly be used at industrial level. For this purpose, Bougainvillea spectabilis leaves were used for the production of charcoal. This charcoal was activated using HCl and HNO3. The AC shows promising efficiency for the adsorption of Fe II as a function of medium pH, contact time, adsorbent dose and temperature. Maximum adsorption was observed with 0.5–0.9 g adsorbent dose, 30 min contact time and at pH 3. Adsorption showed independence of temperature in the range of 30–70 °C. Among, Freundlich and Langmuir isotherms, the adsorbate followed Langmuir isothermal model. Among kinetics models, adsorbate followed pseudo second order kinetic model with R2 values of 0.9985 and 0.9996 for HCl treated and HNO3 treated AC, respectively. These data suggest that AC synthesized from Bougainvillea leaves proved to be an excellent adsorbent for the removal of iron metal from aqueous solution.

Sol–Gel Synthesis of Mesoporous Silica–Iron Composite: Kinetics, Equilibrium and Thermodynamics Studies for the Adsorption of Turquoise-Blue X-GB Dye

Mesoporous silica (MPS) and MPS-Fe composite was prepared via sol–gel technique and characterized by BET, FTIR, XRD, SEM and pZc. The MPS and MPS-Fe adsorption efficiencies were evaluated for a cationic dye Turquoise-blue X-GB. The MPS-Fe composite showed pore size and BET values of 9.52 nm and 309 m2/g, respectively. XRD and SEM analysis revealed the amorphous nature and uniform distribution of spherical partciles with average particle size of 50 nm of MPS-Fe composite. The points of zero (pZc) charge found to be 2.3 and 6.3 for MPS and MPS-Fe, respectively. The MPS and MPS-Fe showed promising efficiency for the adsorption of Turquoise-blue X-GB as a function of medium pH, contact time, dye initial concentration and temperature. Among, Freundlich, Langmuir, Harkins–Jura, Temkin, Doubinin–Radushkevich isotherms, the Turquoise-blue X-GB followed Langmuir isothermal model with adsorption capacities of 83.34 mg/g and 74.07 mg/g for MPS and MPS-Fe composite, respectively. Among kinetics models, pseudo second order kinetic model fitted to the dye adsorption with R2 values of 0.998 and 0.988 for MPS and MPS-Fe composite, respectively. The negative values of enthalpy (ΔH) and free energy (ΔG) revealed exothermic and spontaneous adsorption of dye at room temperature. Results revealed that MPS and MPS-Fe composite have promising potential for Turquoise-blue X-GB dye adsorption and could possibly be extended for the adsorption of dyes from textile effluents.