'Stealth' corona-core nanoparticles surface modified by polyethylene glycol (PEG): influences of the corona (PEG chain length and surface density) and of the core composition on phagocytic uptake and plasma protein adsorption

Functionalizable and ultrastable zwitterionic nanogels

Multifunctional biomimetic nanogels based on zwitterionic poly(carboxybetaine methacrylate) (pCBMA) were synthesized by inverse microemulsion free-radical polymerization. pCBMA nanogels exhibited excellent stability in 100% fetal bovine serum. Dextran labeled with fluorescein isothiocyanate (FITC-dextran) was encapsulated in nanogels as a model drug. Encapsulated FITC-dextran exhibited controlled release from the pCBMA nanogel. Additionally, pCBMA nanogels carry abundant carboxylate groups as functional groups used to conjugate ligands to the nanogels for targeted drug delivery. Flow cytometry results obtained showed that pCBMA nanogels conjugated with cyclo[Arg-Gly-Asp-D-Tyr-Lys] ligands dramatically improved the nanogel uptake by primary human umbilical vein endothelium cells. Functionalizable zwitterionic pCBMA nanogels hold great potential as targeted drug-delivery vectors for biomedical applications.

Development of pH sensitive 2-(diisopropylamino)ethyl methacrylate based nanoparticles for photodynamic therapy

Photodynamic therapy is an effective treatment for tumors that involves the administration of light-activated photosensitizers. However, most photosensitizers are insoluble and non-specific. To target the acid environment of tumor sites, we synthesized three poly(ethylene glycol) methacrylate-co-2-(diisopropylamino)ethyl methacrylate (PEGMA-co-DPA) copolymers capable of self-assembly to form pH sensitive nanoparticles in an aqueous environment, as a means of encapsulating the water-insoluble photosensitizer, meso-tetra(hydroxyphenyl)chlorin (m-THPC). The critical aggregation pH of the PEGMA-co-DPA polymers was 5.8-6.6 and the critical aggregation concentration was 0.0045-0.0089 wt% at pH 7.4. Using solvent evaporation, m-THPC loaded nanoparticles were prepared with a high drug encapsulation efficiency (approximately 89%). Dynamic light scattering and transmission electron microscopy revealed the spherical shape and 132 nm diameter of the nanoparticles. The in vitro release rate of m-THPC at pH 5.0 was faster than at pH 7.0 (58% versus 10% m-THPC released within 48 h, respectively). The in vitro photodynamic therapy efficiency was tested with the HT-29 cell line. m-THPC loaded PEGMA-co-DPA nanoparticles exhibited obvious phototoxicity in HT-29 colon cancer cells after light irradiation. The results indicate that these pH sensitive nanoparticles are potential carriers for tumor targeting and photodynamic therapy.

Characterization and tribology of PEG-like coatings on UHMWPE for total hip replacements

A crosslinked hydrogel coating similar to poly(ethylene glycol) (PEG) was covalently bonded to the surface of ultrahigh molecular weight polyethylene (UHMWPE) to improve the lubricity and wear resistance of the UHWMPE for use in total joint replacements. The chemistry, hydrophilicity, and protein adsorption resistance of the coatings were determined, and the wear behavior of the PEG-like coating was examined by two methods: pin-on-disk tribometry to evaluate macroscale behavior, and atomic force microscopy (AFM) to simulate asperity wear. As expected, the coating was found to be highly PEG-like, with approximately 83% ether content by x-ray photoelectron spectroscopy and more hydrophilic and resistant to protein adsorption than uncoated UHMWPE. Pin-on-disk testing showed that the PEG-like coating could survive 3 MPa of contact pressure, comparable to that experienced by total hip replacements. AFM nanoscratching experiments uncovered three damage mechanisms for the coatings: adhesion/microfracture, pure adhesion, and delamination. The latter two mechanisms appear to correlate well with wear patterns induced by pin-on-disk testing and evaluated by attenuated total reflection Fourier transform infrared spectroscopy mapping. Understanding the mechanisms by which the PEG-like coatings wear is critical for improving the behavior of subsequent generations of wear-resistant hydrogel coatings.

Surface modification, functionalization and bioconjugation of colloidal inorganic nanoparticles

Inorganic colloidal nanoparticles are very small, nanoscale objects with inorganic cores that are dispersed in a solvent. Depending on the material they consist of, nanoparticles can possess a number of different properties such as high electron density and strong optical absorption (e.g. metal particles, in particular Au), photoluminescence in the form of fluorescence (semiconductor quantum dots, e.g. CdSe or CdTe) or phosphorescence (doped oxide materials, e.g. Y(2)O(3)), or magnetic moment (e.g. iron oxide or cobalt nanoparticles). Prerequisite for every possible application is the proper surface functionalization of such nanoparticles, which determines their interaction with the environment. These interactions ultimately affect the colloidal stability of the particles, and may yield to a controlled assembly or to the delivery of nanoparticles to a target, e.g. by appropriate functional molecules on the particle surface. This work aims to review different strategies of surface modification and functionalization of inorganic colloidal nanoparticles with a special focus on the material systems gold and semiconductor nanoparticles, such as CdSe/ZnS. However, the discussed strategies are often of general nature and apply in the same way to nanoparticles of other materials.

pH-sensitive multi-PEGylated block copolymer as a bioresponsive pDNA delivery vector

PURPOSE

A reversibly-PEGylated diblock copolymer, poly(aspartate-hydrazide-poly(ethylene glycol))-block-poly(aspartate-diaminoethane) (p[Asp(Hyd-PEG)]-b-p[Asp(DET)]) was reported here for enhanced gene transfection and colloidal stability. The diblock copolymer possessed a unique architecture based on a poly(aspartamide) backbone. The first block, p[Asp(Hyd)], was used for multi-PEG conjugations, and the second block, p[Asp(DET)], was used for DNA condensation and endosomal escape.

METHODS

p[Asp(Hyd-PEG)]-b-p[Asp(DET)] was synthesized and characterized by (1)H-NMR. Polyplexes were formed by mixing the synthesized polymers and pDNA. The polyplex size, ζ-potential, and in vitro transfection efficiency were determined by dynamic light scattering, ζ-potential measurements, and luciferase assays, respectively. pH-dependent release of PEG from the polymer was monitored by cationic-exchange chromatography.

RESULTS

The polyplexes were 70-90 nm in size, and the surface charge was effectively shielded by a PEG layer. The transfection efficiency of the reversibly PEGylated polyplexes was confirmed to be comparable to that of the non-PEGylated counterparts and 1,000 times higher than that of the irreversibly PEGylated polyplexes. PEG release was demonstrated to be pH-sensitive. Fifty percent of the PEG was released within 30 min at pH 5, while the polymer incubated at pH 7.4 could still maintain 50% of PEG after 8 h.

CONCLUSION

The reversibly PEGylated polyplexes were shown to maintain polyplex stability without compromising transfection efficiency.

Delivery and efficacy of a cancer drug as a function of the bond to the gold nanoparticle surface

In this feature article, gold nanoparticle conjugates loaded with phthalocyanine-based PDT drugs are prepared and tested for delivery efficiency and PDT efficacy on HeLa cancer cells. It could be shown that the delivery and PDT outcome are strongly affected by the bond that links the drug load to the nanoparticle surface. Whereas labile amino adsorption to the Au nanoparticle surface allows for efficient drug release into the cancer cells and for efficient PDT, a covalent thiol bond to the Au nanoparticle leads to the delivery of the drug into cell vesicles, and no PDT effect is observed. This work highlights the importance of carefully choosing the interaction between drug molecules and the nanoparticle surface.

Evaluation of the pro-inflammatory potential of nanostructured drug carriers in knee-joints of rats: effect on nociception, edema, and cell migration

Nanocarriers have been developed aiming at drug delivery; however, the irritating effects of these nanoparticles on naïve or inflamed articular tissues are not known. Poly(D,L-lactide) (N-PLA), methoxy poly(ethylene glycol)-b-poly(D,L-lactide) (N-PEG-PLA), and Dynasan 116 (SLN) were used to prepare the nanocarriers. The average diameter (nm) and zeta potential (mV) of these particles were, respectively, 251 and -33.2, 169 and -22.1, and 105 and -13.0. Naive or carrageenan-primed knee-joints received 100 microL of nanoparticle suspensions or control solution. Incapacitation and articular diameter were determined hourly. Synovial leukocytes were counted 6 h after nanoparticle injection. N-PLA increased the articular diameter and leukocytes, but did not cause incapacitation. In primed knee-joints, N-PLA caused incapacitation, and increased the articular diameter and leukocytes. SLN did not produce inflammatory signals either in naive or primed knees. In primed knee-joints, N-PEG-PLA presented an intermediate effect characterized by an increase in the articular diameter, and a slight increase of leukocytes, but not incapacitation. These results suggest that solid lipid nanoparticles may be safer than polymeric ones, which may be correlated to their chemical composition and superficial charge.

Effect of aqueous solubility of grafted moiety on the physicochemical properties of poly(d,l-lactide) (PLA) based nanoparticles

In order to evaluate the solubility effect of grafted moiety on the physicochemical properties of poly(d,l-lactide) (PLA) based nanoparticles (NPs), two materials of completely different aqueous solubility, polyethylene glycol (PEG) and palmitic acid were grafted on PLA backbone at nearly the same grafting density, 2.5% (mol of grafted moiety/mol of lactic acid monomer). Blank and ibuprofen-loaded NPs were fabricated from both polymers and their properties were compared to PLA homopolymer NPs as a control. NPs were analyzed for major physicochemical parameters such as encapsulation efficiency, size and size distribution, surface charge, thermal properties, surface chemistry, % poly(vinyl alcohol) (PVA) adsorbed at the surface of NPs, and drug release pattern. Encapsulation efficiency of ibuprofen was found to be nearly the same for both polymers approximately 36% and 39% for PEG2.5%-g-PLA and palmitic acid2.5%-g-PLA NPs, respectively. Lyophilized NPs of palmitic acid2.5%-g-PLA either blank or loaded showed larger hydrodynamic diameter ( approximately 180nm) than PEG2.5%-g-PLA NPs ( approximately 135nm). PEG2.5%-g-PLA NPs showed lower % of PVA adsorbed at their surface ( approximately 5%, w/w) than palmitic acid2.5%-g-PLA NPs ( approximately 10%, w/w). Surface charge of palmitic acid2.5%-g-PLA NPs seems to be influenced by the large amount of PVA remains associated within their matrix. Thermal analysis using DSC revealed possible drug crystallization inside NPs. Both AFM phase imaging and XPS studies revealed the tendency of PEG chains to migrate towards the surface of PEG2.5%-g-PLA NPs. While, XPS analysis of palmitic acid2.5%-g-PLA NPs showed the tendency of palmitate chains to position themselves into the inner core of the forming particle avoiding facing the aqueous phase during NPs preparation using O/W emulsion method. The in vitro release pattern showed that PEG2.5%-g-PLA NPs exhibited faster release rates than palmitic acid2.5%-g-PLA NPs. PEG and palmitate chains when grafted onto PLA backbone, different modes of chain organization during NPs formation were obtained, affecting the physicochemical properties of the obtained NPs. The obtained results suggest that the properties of PLA-based NPs can be tuned by judicious selection of both chemistry and solubility profile of grafted material over PLA backbone.

PEGylated nanocarriers for systemic delivery

In this chapter, we outline the protocols for PEGylation of some drug carriers, such as dendrimer, polymeric nanoparticles, liposomes, for systemic delivery. PEGylation simply refers to the modification of particle surface by covalently grafting, entrapping, or adsorbing PEG chains of vivid length. However, limitation of simple adsorption being easy displacement of the coating layer in vivo, covalent mode for PEGylation of nanoparticles is mostly preferred, and outlined herein. Derivatization and activation of polyethylene glycol is an important step during PEGylation and its chemistry chiefly relies on availability as well as type of functional groups on carrier periphery. A summarized set of protocols for PEGylation of widely explored nanocarriers for systemic delivery is presented.

Nanoparticle technologies for cancer therapy

Nanoparticles as drug delivery systems enable unique approaches for cancer treatment. Over the last two decades, a large number of nanoparticle delivery systems have been developed for cancer therapy, including organic and inorganic materials. Many liposomal, polymer-drug conjugates, and micellar formulations are part of the state of the art in the clinics, and an even greater number of nanoparticle platforms are currently in the preclinical stages of development. More recently developed nanoparticles are demonstrating the potential sophistication of these delivery systems by incorporating multifunctional capabilities and targeting strategies in an effort to increase the efficacy of these systems against the most difficult cancer challenges, including drug resistance and metastatic disease. In this chapter, we will review the available preclinical and clinical nanoparticle technology platforms and their impact for cancer therapy.

Molecular and magnetic resonance imaging: The value of immunoliposomes

Molecular imaging has the potential to transform the field of diagnostic imaging through enabling far more detailed investigation and characterisation of disease processes than is currently possible. Magnetic resonance imaging (MRI) is capable of three-dimensional non-invasive imaging of opaque tissues at near cellular resolution. Among the imaging techniques available today, MRI has, perhaps, the greatest potential to exploit the possibilities that molecular imaging presents. Nanoparticles are the focus of intense research, due to a wide variety of potential applications in the biomedical, optical, and electronic fields. In this article we examine the progress made in the development of nanoparticles as targeted contrast agents for molecular magnetic resonance imaging. In particular, we will examine the potential of antibody-targeted liposomes (immunoliposomes) as vehicles for delivering MRI contrast agents to cellular biomarkers, thus enabling visualisation of structures and processes at the molecular level. We will address some of the challenges that must be faced by researchers in this field before the progress made in the laboratory can be translated into improved clinical diagnostics and therapeutics.

Intravenous hemostat: nanotechnology to halt bleeding

Blood loss is the major cause of death in both civilian and battlefield traumas. Methods to staunch bleeding include pressure dressings and absorbent materials. For example, QuikClot effectively halts bleeding by absorbing large quantities of fluid and concentrating platelets to augment clotting, but these treatments are limited to compressible and exposed wounds. An ideal treatment would halt bleeding only at the injury site, be stable at room temperature, be administered easily, and work effectively for internal injuries. We have developed synthetic platelets based on Arg-Gly-Asp functionalized nanoparticles, which halve bleeding time after intravenous administration in a rat model of major trauma. The effects of these synthetic platelets surpass other treatments, including recombinant factor VIIa, which is used clinically for uncontrolled bleeding. Synthetic platelets were cleared within 24 hours at a dose of 20 mg/ml, and no complications were seen out to 7 days after infusion, the longest time point studied. These synthetic platelets may be useful for early intervention in trauma and demonstrate the role that nanotechnology can have in addressing unmet medical needs.

PEGylated PLGA nanoparticles for the improved delivery of doxorubicin

We hypothesize that the efficacy of doxorubicin (DOX) can be maximized and dose-limiting cardiotoxicity minimized by controlled release from PEGylated nanoparticles. To test this hypothesis, a unique surface modification technique was used to create PEGylated poly(lactic-co-glycolic acid) (PLGA) nanoparticles encapsulating DOX. An avidin-biotin coupling system was used to control poly(ethylene glycol) conjugation to the surface of PLGA nanoparticles, of diameter approximately 130 nm, loaded with DOX to 5% (wt/wt). Encapsulation in nanoparticles did not compromise the efficacy of DOX; drug-loaded nanoparticles were found to be at least as potent as free DOX against A20 murine B-cell lymphoma cells in culture and of comparable efficacy against subcutaneously implanted tumors. Cardiotoxicity in mice as measured by echocardiography, serum creatine phosphokinase (CPK), and histopathology was reduced for DOX-loaded nanoparticles as compared with free DOX. Administration of 18 mg/kg of free DOX induced a sevenfold increase in CPK levels and significant decreases in left ventricular fractional shortening over control animals, whereas nanoparticle-encapsulated DOX produced none of these pathological changes.

FROM THE CLINICAL EDITOR

The efficacy of doxorubicin (DOX) may be maximized and dose-limiting cardiotoxicity minimized by controlled release from PEGylated nanoparticles. Administration of 18 mg/kg of free DOX induced a sevenfold increase in CPK levels and significant decreases in left ventricular fractional shortening in mice, whereas nanoparticle-encapsulated DOX produced none of these pathological changes.

Preparation of intravenous stealthy acyclovir nanoparticles with increased mean residence time

A major cause of thromboplebitis, during acyclovir (ACV) parenteral administration is the high pH of its reconstituted solution (pH 11). Its plasma half life is 2.5 h, requiring repeated administration which may result in excess of drug solubility leading to possible renal damage and acute renal failure. The present study reports the efficiency of stealthy ACV nanoparticles (NPs) to increase the mean residence time of the drug 29 times. It caused a marked decrease in thrombophlebitis when injected into rabbit's ear vein. The polymers used were (Poly lactic acid, polylactic-co-glycolic (PLGA) 85/15, PLGA 75/25, PLGA 50/50). Particles were evaluated for their encapsulation efficiency, morphology, particle size and size distribution, zeta potential, and in vitro drug release. Small NPs (280-300 nm) with 60% drug release after 48 h were obtained. Among the block copolymer used, poloxamer 407 was of superior coating properties with a coat thickness in the range of 1.5-8.3 nm and a decreased surface charge.

The performance of PEGylated nanocapsules of perfluorooctyl bromide as an ultrasound contrast agent

The surface of polymeric nanocapsules used as ultrasound contrast agents (UCAs) was modified with PEGylated phospholipids in order to escape recognition and clearance by the mononuclear phagocyte system and achieve passive tumor targeting. Nanocapsules consisted of a shell of poly(lactide-co-glycolide) (PLGA) encapsulating a liquid core of perfluorooctyl bromide (PFOB). They were decorated with poly(ethylene glycol-2000)-grafted distearoylphosphatidylethanolamine (DSPE-PEG) incorporated in the organic phase before the solvent emulsification-evaporation process. The influence of DSPE-PEG concentration on nanocapsule size, surface charge, morphology, hydrophobicity and complement activation was evaluated. Zeta potential measurements, Hydrophobic interaction chromatography and complement activation provide evidence of DSPE-PEG presence at nanocapsule surface. Electronic microscopy reveals that the core/shell structure is preserved up to 2.64 mg of DSPE-PEG for 100 mg PLGA. In vivo ultrasound imaging was performed in mice bearing xenograft tumor with MIA PaCa-2 cells, either after an intra-tumoral or intravenous injection of nanocapsules. Tumor was observed only after the intra-tumoral injection. Despite the absence of echogenic signal in the tumor after intravenous injection of nanocapsules, histological analysis reveals their accumulation within the tumor tissue demonstrating that tissue distribution is not the unique property required for ultrasound contrast agents to be efficient.

Liquid perfluorocarbons as contrast agents for ultrasonography and (19)F-MRI

Perfluorocarbons (PFCs) are fluorinated compounds that have been used for many years in clinics mainly as gas/oxygen carriers and for liquid ventilation. Besides this main application, PFCs have also been tested as contrast agents for ultrasonography and magnetic resonance imaging since the end of the 1970s. However, most of the PFCs applied as contrast agents for imaging were gaseous. This class of PFCs has been recently substituted by liquid PFCs as ultrasound contrast agents. Additionally, liquid PFCs are being tested as contrast agents for (19)F magnetic resonance imaging (MRI), to yield dual contrast agents for both ultrasonography and (19)F MRI. This review focuses on the development and applications of the different contrast agents containing liquid perfluorocarbons for ultrasonography and/or MRI: large and small size emulsions (i.e. nanoemulsions) and nanocapsules.

In vitro macrophage uptake and in vivo biodistribution of PLA-PEG nanoparticles loaded with hemoglobin as blood substitutes: effect of PEG content

The aim of the present work is to investigate the effect of PEG content in copolymer on physicochemical properties, in vitro macrophage uptake, in vivo pharmacokinetics and biodistribution of poly(lactic acid) (PLA)-poly(ethylene glycol) (PEG) hemoglobin (Hb)-loaded nanoparticles (HbP) used as blood substitutes. The HbP were prepared from PLA and PLA-PEG copolymer of varying PEG contents (5, 10, and 20 wt%) by a modified w/o/w method and characterized with regard to their morphology, size, surface charge, drug loading, surface hydrophilicity, and PEG coating efficiency. The in vitro macrophage uptake, in vivo pharmacokinetics, and biodistribution following intravenous administration in mice of HbP labeled with 6-coumarin, were evaluated. The HbP prepared were all in the range of 100-200 nm with highest encapsulation efficiency 87.89%, surface charge -10 to -33 mV, static contact angle from 54.25 degrees to 68.27 degrees , and PEG coating efficiency higher than 80%. Compared with PLA HbP, PEGylation could notably avoid the macrophage uptake of HbP, in particular when the PEG content was 10 wt%, a minimum uptake (6.76%) was achieved after 1 h cultivation. In vivo, besides plasma, the major cumulative organ was the liver. All PLA-PEG HbP exhibited dramatically prolonged blood circulation and reduced liver accumulation, compared with the corresponding PLA HbP. The PEG content in copolymer affected significantly the survival time in blood. Optimum PEG coating (10 wt%) appeared to exist leading to the most prolonged blood circulation of PLA-PEG HbP, with a half-life of 34.3 h, much longer than that obtained by others (24.2 h). These results demonstrated that PEG 10 wt% modified PLA HbP with suitable size, surface charge, and surface hydrophilicity, has a promising potential as long-circulating oxygen carriers with desirable biocompatibility and biofunctionality.

Study on docetaxel-loaded nanoparticles with high antitumor efficacy against malignant melanoma

Docetaxel (Doc) has extraordinary activities against a variety of solid tumors. However, the clinical efficacy of Doc is limited due to its poor solubility, low selective distribution, fast elimination in vivo, etc. In the present study, Doc was incorporated into the core-shell structure of nanoparticles prepared based on our previous work. The obtained docetaxel-loaded nanoparticles (DOCNP) were characterized with various biophysical methodologies, and its antitumor efficacy against malignant melanoma was evaluated both in vitro and in vivo. Our results indicated that Doc could be incorporated into the nanoparticles with high encapsulation efficiency (>90%). The incorporated Doc can be released from DOCNP in a sustained manner. In vitro cytotoxicity studies indicated that DOCNP could effectively kill B16 cells and show a dose- and time-dependent efficacy. Furthermore, intratumoral administration revealed that DOCNP has significantly higher antitumor effect and lower toxicity to normal cells and tissues than free Doc. These results suggest that DOCNP may be a promising drug delivery system in therapy for malignant melanoma.

Nanoparticle interaction with plasma proteins as it relates to particle biodistribution, biocompatibility and therapeutic efficacy

Proteins bind the surfaces of nanoparticles, and biological materials in general, immediately upon introduction of the materials into a physiological environment. The further biological response of the body is influenced by the nanoparticle-protein complex. The nanoparticle's composition and surface chemistry dictate the extent and specificity of protein binding. Protein binding is one of the key elements that affects biodistribution of the nanoparticles throughout the body. Here we review recent research on nanoparticle physicochemical properties important for protein binding, techniques for isolation and identification of nanoparticle-bound proteins, and how these proteins can influence particle biodistribution and biocompatibility. Understanding the nanoparticle-protein complex is necessary for control and manipulation of protein binding, and allows for improved engineering of nanoparticles with favorable bioavailability and biodistribution.

Interaction of colloidal gold nanoparticles with human blood: effects on particle size and analysis of plasma protein binding profiles

Nanoparticle size and plasma binding profile contribute to a particle's longevity in the bloodstream, which can have important consequences for therapeutic efficacy. In this study an approximate doubling in nanoparticle hydrodynamic size was observed upon in vitro incubation of 30- and 50-nm colloidal gold in human plasma. Plasma proteins that bind the surface of citrate-stabilized gold colloids have been identified. Effects of protein binding on the nanoparticle hydrodynamic size, elements of coagulation, and the complement system have been investigated. The difference in size measurements obtained from dynamic light scattering, electron microscopy, and scanning probe microscopy are also discussed.

Surface modification of mitoxantrone-loaded PLGA nanospheres with chitosan

The purpose of this research was to develop polylactic-co-glycolic acid (PLGA) nanospheres surface modified with chitosan (CS). Mitoxantrone- (MTO-) loaded PLGA nanospheres were prepared by a solvent evaporation technique. The PLGA nanospheres surface was modified with CS by two strategies (adsorption and covalent binding). PLGA nanospheres of 248.4+/-21.0 nm in diameter characterized by the laser light scattering technique, scanning electron microscopy (SEM) are spherical and its drug encapsulation efficiency is 84.1+/-3.4%. Zeta potential of unmodified nanospheres was measured to be negative -21.21+/-2.13 mV. The positive zeta potential of modified nanospheres reveals the presence of CS on the surface of the modified nanospheres. Modified nanospheres were characterized for surface chemistry by X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FT-IR). FT-IR spectra exhibited peaks at 3420 cm(-1) and 1570 cm(-1), XPS spectra shows the N 1s (atomic orbital 1s of nitrogen) region of the surface of the nanospheres, corresponding to the primary amide of CS. In vitro drug release demonstrated that CS-modified nanospheres have many advantages such as prolonged drug release property and decreased the burst release over the unmodified nanospheres, and the modified nanospheres by covalent binding method could achieve the release kinetics of a relatively constant release. These data demonstrate high potential of CS-modified PLGA nanospheres for the anticancer drug carrier.

Benchmark experimental data set and assessment of adsorption free energy for peptide-surface interactions

With the increasing interest in protein adsorption in fields ranging from bionanotechnology to biomedical engineering, there is a growing need to understand protein-surface interactions at a fundamental level, such as the interaction between individual amino acid residues of a protein and functional groups presented by a surface. However, relatively little data are available that experimentally provide a quantitative, comparative measure of these types of interactions. To address this deficiency, the objective of this study was to generate a database of experimentally measured standard state adsorption free energy (DeltaGoads) values for a wide variety of amino acid residue-surface interactions using a host-guest peptide and alkanethiol self-assembled monolayers (SAMs) with polymer-like functionality as the model system. The host-guest amino acid sequence was synthesized in the form of TGTG-X-GTGT, where G and T are glycine and threonine amino acid residues and X represents a variable residue. In this paper, we report DeltaGoads values for the adsorption of 12 different types of the host-guest peptides on a set of nine different SAM surfaces, for a total of 108 peptide-surface systems. The DeltaGoads values for these 108 peptide-surface combinations show clear trends in adsorption behavior that are dependent on both peptide composition and surface chemistry. These data provide a benchmark experimental data set from which fundamental interactions that govern peptide and protein adsorption behavior can be better understood and compared.

Development of a new poly(ethylene glycol)-graft-poly(D,L-lactic acid) as potential drug carriers

A new poly(ethylene glycol) (PEG)-modified poly(D,L-lactic acid) (PLA) was synthesized by grafting maleic anhydride onto PLA and subsequently amidating with O,O'-bis-(2-aminopropyl) polypropylene glycol-block-polyethylene oxide-block-polypropylene glycol (H2N-PEG-NH2, Mw: 600). Its structure was confirmed by FTIR, DSC, 1H NMR, GPC, and ninhydrin test. The polymer is more hydrophilic compared with PLA according to contact angle tests, and is degradable as determined from its pH and mass changes during degradation. The polymer shows a 62.7% decrease in BSA absorption compared with PLA when dried in air, and a 82.76% decrease when dried under 65% humidity, as measured by fluorospectrophotometry. The polymer promotes adhesion and proliferation of osteoblasts, determined by MTT assay. With this new polymer, spherical nanoscale aggregates encapsulated with or without hydrophilic dye are formed spontaneously in water, visualized by inverted microscope and AFM. The particle size is concentration dependent as confirmed by dynamic light scattering, and its critical micelle concentration was 1.124 microg/mL as determined by a fluorescence method. The good hydrophilicity, degradability, cellular compatibility, protein-resistance, self-aggregation, and reactivity of the polymer may lead to its potential applications in drug delivery.

Complete high-density lipoproteins in nanoparticle corona

In a biological environment, nanoparticles immediately become covered by an evolving corona of biomolecules, which gives a biological identity to the nanoparticle and determines its biological impact and fate. Previous efforts at describing the corona have concerned only its protein content. Here, for the first time, we show, using size exclusion chromatography, NMR, and pull-down experiments, that copolymer nanoparticles bind cholesterol, triglycerides and phospholipids from human plasma, and that the binding reaches saturation. The lipid and protein binding patterns correspond closely with the composition of high-density lipoprotein (HDL). By using fractionated lipoproteins, we show that HDL binds to copolymer nanoparticles with much higher specificity than other lipoproteins, probably mediated by apolipoprotein A-I. Together with the previously identified protein binding patterns in the corona, our results imply that copolymer nanoparticles bind complete HDL complexes, and may be recognized by living systems as HDL complexes, opening up these transport pathways to nanoparticles. Apolipoproteins have been identified as binding to many other nanoparticles, suggesting that lipid and lipoprotein binding is a general feature of nanoparticles under physiological conditions.

Polymer brush covalently attached to OH-functionalized mica surface via surface-initiated ATRP: control of grafting density and polymer chain length

The controlled grafting density of poly(tert-butyl acrylate) was studied on OH-activated mica substrates via surface-initiated atom-transfer radical polymerization (ATRP). By properly adjusting parameters such as the immobilization reaction time and the concentration of an ATRP initiator, a wide range of initiator surface coverages and hence polymer densities on mica were possible. The covalently immobilized initiator successfully promoted the polymerization of tert-butyl acrylate on mica surfaces. The resulting polymer layer thickness was measured by AFM using a step-height method. Linear relationships of the polymer thickness with respect to the molecular weight of the free polymer and with respect to the monomer conversion were observed, suggesting that ATRP is well controlled and relatively densely end-grafted layers were obtained. The polymer grafting density controlled by adjusting the initiator surface coverage was confirmed by the polymer layer swelling capacity and film thickness measurements.

In vitro macrophage uptake and in vivo biodistribution of long-circulation nanoparticles with poly(ethylene-glycol)-modified PLA (BAB type) triblock copolymer

The effect of the PEG-grafted degree in the range of 0-30% on the in vitro macrophage uptake and in vivo biodistribution of poly(ethylene glycol)-poly(lactic acid)-poly(ethylene glycol) (PELE) nanoparticles (NPs) were investigated in this paper. The prepared NPs were characterized in terms of size, zeta potential, hydrophilicity, poly(vinyl alcohol) (PVA) residual on nanoparticles surfaces as well as drug loading. The macrophage uptake and biodistribution including plasma clearance kinetics following intravenous administration in mice of the NPs labeled by 6-coumarin were evaluated. The results showed that, except for the particles size, the hydrophilicity, superficial charges and in vitro phagocytosis amount of NPs are dependent on the PEG content in the copolymers greatly. The higher of the PEG content, the more hydrophilicity and the nearer to neutral surface charge was observed. And the prolonged circulation half-life (t(1/2)) of the PELE NPs in plasma was also strongly depended on the PEG content with the similar trend. In particular for PELE30 (containing 30% of PEG content) NPs, with the lowest phagocytosis uptake accompanied the highest hydrophilicity and approximately neutral charge, it had the longest half-life in vivo with almost 12-fold longer and accumulation in the reticuloendothelial system organs close to 1/2-fold lower than those of reference PLA. These results demonstrated that the PELE30 NPs with neutral charge and suitable size has a promising potential as a long-circulating oxygen carrier system with desirable biocompatibility and biofunctionality.

Magnetic targeting for site-specific drug delivery: applications and clinical potential

BACKGROUND

Magnetic vehicles are very attractive for delivery of therapeutic agents as they can be targeted to specific locations in the body through the application of a magnetic field gradient. The magnetic localization of a therapeutic agent results in the concentration of the therapy at the target site consequently reducing or eliminating the systemic drug side effects.

OBJECTIVE

The aim of this review is to provide an update on the progress made in the development of the magnetic targeting technique addressing characteristics of the magnetic carriers and limitations of the current targeting magnet systems.

METHODS

This review discusses fundamental requirements for the optimal formulation of the magnetic carrier, current applications and potentially new approaches for the magnetically mediated, site-specific localization of therapeutic agents, including drugs, genes and cells.

RESULTS/CONCLUSION

More efficient targeting magnetic systems in combination with prolonged circulation lifespan and carriers' surface recognition properties will improve the targeting efficiency of magnetic nanocarriers and enhance therapeutic agent availability at the molecular site of agent action. The main future magnetic targeting applications were categorized emphasizing the most promising directions and possible strategies for improving the magnetic targeting technique.

Polymeric nanoparticles encapsulating betamethasone phosphate with different release profiles and stealthiness

The purpose of this study was to engineer nanoparticles with various sustained profiles of drug release and prolonged circulation by blending poly(D,L-lactic acid)/poly(D,L-lactic/glycolic acid) (PLA/PLGA) homopolymers and poly(ethylene glycol) (PEG)-block-PLA/PLGA copolymers encapsulating betamethasone disodium 21-phosphate (BP). Nanoparticles of different sizes, drug encapsulation/release profiles, and cellular uptake levels were obtained by mixing homopolymers and block copolymers with different compositions/molecular weights at various blend ratios by an oil-in-water solvent diffusion method. The in vitro release of BP increased with nanoparticles of smaller size or of PLGA homopolymers instead of PLA homopolymers. Furthermore, the uptake of nanoparticles by macrophage-like cells decreased with nanoparticles of higher PEG content, and nanoparticles of PEG-PLGA block copolymers were taken up earlier than those of PEG-PLA block copolymers after incubation with serum. In addition, prolonged blood circulation was observed with nanoparticles of smaller size with higher PEG content, and nanoparticles of PEG-PLA block copolymers remained longer in circulation than those of PEG-PLGA block copolymers. Analysis of BP concentration in organs revealed reduced liver distribution of blended nanoparticles compared with PLA nanoparticles. This is the first study to systematically design and characterize biodegradable PLA/PLGA and PEG-PLA/PLGA-blended nanoparticles encapsulating BP with different release profiles and stealthiness.

Immunocompatibility properties of lipid-polymer hybrid nanoparticles with heterogeneous surface functional groups

Here we report the immunological characterization of lipid-polymer hybrid nanoparticles (NPs) and propose a method to control the levels of complement activation induced by these NPs. This method consists of the highly specific modification of the NP surface with methoxyl, carboxyl, and amine groups. Hybrid NPs with methoxyl surface groups induced the lowest complement activation, whereas the NPs with amine surface groups induced the highest activation. All possible combinations among carboxyl, amine, and methoxyl groups also activated the complement system to a certain extent. All types of NPs activated the complement system primarily via the alternative pathway rather than the lectin pathway. The classical pathway was activated to a very small extent by the NPs with carboxyl and amine surface groups. Human serum and plasma protein binding studies showed that these NPs had different protein binding patterns. Studies of both complement activation and coagulation activation suggested that NPs with methoxyl surface groups might be an ideal candidate for drug delivery applications, since they are not likely to cause any immunological adverse reaction in the human body.

Investigation of polymeric amphiphilic nanoparticles as antitumor drug carriers

In this paper, polymeric amphiphilic nanoparticles based on oleoyl-chitosan (OCH) with different degrees of substitution (DS, 5%, 11% and 27%) were prepared by Oil/Water emulsification method. Mean diameters of the nanoparticles were 327.4 nm, 255.3 nm and 192.6 nm, respectively. Doxorubicin (DOX) was efficiently loaded into OCH nanoparticles and provided a sustained released after a burst release in PBS. These nanoparticles showed no cytotoxicity to mouse embryo fibroblasts (MEF) and low hemolysis rates (<5%). The results of SDS-PAGE indicated that bovine calf serum (BCS) adsorption on OCH nanoparticles was inhibited by smaller particle size. Cellular uptake was evaluated by incubating fluorescence labeled OCH nanoparticles with human lung carcinoma cells (A549) and mouse macrophages (RAW264.7). Cellular uptake of OCH nanoparticles was time--and concentration--dependent. Finding the appropriate incubation time and concentration of OCH nanoparticles used as drug carriers might decrease phagocytic uptake, increase cancer cell uptake and ultimately improve therapeutic efficiency of antitumor therapeutic agents.

Preparation of superparamagnetic magnetite nanoparticles by reverse precipitation method: contribution of sonochemically generated oxidants

Magnetic iron oxide nanoparticles were successfully prepared by a novel reverse precipitation method with the irradiation of ultrasound. TEM, XRD and SQUID analyses showed that the formed particles were magnetite (Fe(3)O(4)) with about 10nm in their diameter. The magnetite nanoparticles exhibited superparamagnetism above 200K, and the saturation magnetization was 32.8 emu/g at 300 K. The sizes and size distributions could be controlled by the feeding conditions of FeSO(4).7H(2)O aqueous solution, and slower feeding rate and lower concentration lead to smaller and more uniform magnetite nanoparticles. The mechanisms of sonochemical oxidation were also discussed. The analyses of sonochemically produced oxidants in the presence of various gases suggested that besides sonochemically formed hydrogen peroxide, nitrite and nitrate ions contributed to Fe(II) ion oxidation.

Biocompatible Nanocomplexes for Molecular Targeted MRI Contrast Agent

Accurate diagnosis in early stage is vital for the treatment of Hepatocellular carcinoma. The aim of this study was to investigate the potential of poly lactic acid-polyethylene glycol/gadolinium-diethylenetriamine-pentaacetic acid (PLA-PEG/Gd-DTPA) nanocomplexes using as biocompatible molecular magnetic resonance imaging (MRI) contrast agent. The PLA-PEG/Gd-DTPA nanocomplexes were obtained using self-assembly nanotechnology by incubation of PLA-PEG nanoparticles and the commercial contrast agent, Gd-DTPA. The physicochemical properties of nanocomplexes were measured by atomic force microscopy and photon correlation spectroscopy. The T(1)-weighted MR images of the nanocomplexes were obtained in a 3.0 T clinical MR imager. The stability study was carried out in human plasma and the distribution in vivo was investigated in rats. The mean size of the PLA-PEG/Gd-DTPA nanocomplexes was 187.9 +/- 2.30 nm, and the polydispersity index was 0.108, and the zeta potential was -12.36 +/- 3.58 mV. The results of MRI test confirmed that the PLA-PEG/Gd-DTPA nanocomplexes possessed the ability of MRI, and the direct correlation between the MRI imaging intensities and the nano-complex concentrations was observed (r = 0.987). The signal intensity was still stable within 2 h after incubation of the nanocomplexes in human plasma. The nanocomplexes gave much better image contrast effects and longer stagnation time than that of commercial contrast agent in rat liver. A dose of 0.04 mmol of gadolinium per kilogram of body weight was sufficient to increase the MRI imaging intensities in rat livers by five-fold compared with the commercial Gd-DTPA. PLA-PEG/Gd-DTPA nanocomplexes could be prepared easily with small particle sizes. The nanocomplexes had high plasma stability, better image contrast effect, and liver targeting property. These results indicated that the PLA-PEG/Gd-DTPA nanocomplexes might be potential as molecular targeted imaging contrast agent.

Delivery of peptide and protein drugs over the blood-brain barrier

Peptide and protein (P/P) drugs have been identified as showing great promises for the treatment of various neurodegenerative diseases. A major challenge in this regard, however, is the delivery of P/P drugs over the blood-brain barrier (BBB). Intense research over the last 25 years has enabled a better understanding of the cellular and molecular transport mechanisms at the BBB, and several strategies for enhanced P/P drug delivery over the BBB have been developed and tested in preclinical and clinical-experimental research. Among them, technology-based approaches (comprising functionalized nanocarriers and liposomes) and pharmacological strategies (such as the use of carrier systems and chimeric peptide technology) appear to be the most promising ones. This review combines a comprehensive overview on the current understanding of the transport mechanisms at the BBB with promising selected strategies published so far that can be applied to facilitate enhanced P/P drug delivery over the BBB.

Supramolecular assembly of block copolypeptides with semiconductor nanocrystals

We report the analogy between the self-assembly properties of amphiphilic phospholipids and the similar behavior observed for quantum dot (CdSe/CdS)-diblock copolypeptide hybrid systems, and the effect of the self-assembly on secondary structures of the polypeptides. At neutral pH, the diblock copolypeptide, poly(diethyleneglycol-l-lysine)-poly(l-lysine), comprises a positively charged poly-l-lysine (PLL) block and a hydrophilic and uncharged poly(diethyleneglycol-l-lysine) (PEGLL) block. By itself, the copolypeptide is not amphiphilic. However, when the polymers are mixed with water-soluble, negatively charged, citrate-functionalized quantum dots (QDs) in water, shell-like structures or dense aggregates are spontaneously formed. Electrostatic and hydrogen-bonding interactions between the positively charged PLL residues and the negatively charged ligands on the QDs lead to charge neutralization of the PLL block, while the PEGLL block remains hydrophilic. As a result, a pseudo "amphiphilic" molecular unit is formed in which the "hydrophobic" and hydrophilic sections constitute the charge-neutralized PLL residues together with the associating QD and the remaining polypeptide residues that are not neutralized, respectively. The generation of these "amphiphilic" molecular units in turn drives the formation of the QD-polypeptide assemblies. Support for this analogy comes from the observed transition in the shape of the assembly from a shell-like structure to a dense aggregate that is very much analogous to the vesicle-to-micelle transition observed in lipid systems. Furthermore, this shape transition can be explained qualitatively using a concept that is analogous to the surfactant number (N = a(hc)/a(hg)), which has been applied extensively in amphiphilic lipid systems. Specifically, as the ratio of the "hydrophobic" area (a(hc)) to the hydrophilic area (a(hg)) decreases, a shape transition from the shell-like structure to the dense aggregate occurs. In addition, the size of the shell-like structure changes as a function of the dimensions of the "amphiphilic" molecular unit in a manner that is similar to how the size of the lipid vesicle changes with the dimensions of the lipid molecule. Circular dichroism (CD) measurements have shown that the PEGLL-PLL molecule has a well-defined secondary structure (alpha-helical PEGLL block and random coil PLL block) that remains virtually unchanged after reacting with the QDs. This finding is consistent with the hypothesis that it is the electrostatic interaction between the amines on the PLL block and the citrate ligands on the QDs that drives the self-assembly.

Long-circulating polymeric nanoparticles bearing a combinatorial coating of PEG and water-soluble chitosan

A major obstacle in the development of polymeric nanoparticles (NPs) as effective drug delivery vesicles is the rapid clearance from blood. In order to realize a significant prolongation in blood circulation, a combinatorial design, covalent attachment of polyethylene glycol (PEG) to polylactic acid (PLA) and physical adsorption of water-soluble chitosan (WSC) to particle surface, has been developed for surface modification of PLA NPs. Two types of WSC, cationic partially deacetylated chitin (PDC) and anionic N-carboxy propionyl chitosan sodium (CPCTS) were investigated. All the NPs formulated in the size range of 100-200nm were prepared by a modified w/o/w technique and physicochemically characterized. In vitro phagocytosis by mouse peritoneal macrophage (MPM), in vivo blood clearance and biodistribution following intravenous administration in mice, of these NPs labeled with 6-coumarin, were evaluated. The presence of WSC, whether alone or with PEG, highly improved the surface hydrophilicity as well as suspension stability of NPs. Their surface charge was greatly affected by the WSC coating, being close to neutrality for PEG/PDC NPs and highly negative in the case of PEG/CPCTS NPs. In comparison to NPs treated with PEG or WSC alone, the synergistic action of PEG and WSC strongly inhibited the macrophage uptake and extended the circulation half-life (t(1/2)) with concomitant reduced liver sequestration. Particularly, PEG/PDC NPs showed the most striking result with regard to their performance in vitro and in vivo. Calculated t(1/2) of PEG/PDC NPs and PEG/CPCTS NPs was 63.5h and 7.1h, respectively, much longer than that of control PEG/PVA NPs (1.1h). More WSC materials need to be evaluated, but the present data suggest that, a combinatorial coating of PEG and PDC greatly prolongs the systemic circulation of NPs and represents a significant step in the development of long-circulating drug delivery carriers.

Challenges in the development of magnetic particles for therapeutic applications

Certain iron-based particle formulations have useful magnetic properties that, when combined with low toxicity and desirable pharmacokinetics, encourage their development for therapeutic applications. This mini-review begins with background information on magnetic particle use as MRI contrast agents and the influence of material size on pharmacokinetics and tissue penetration. Therapeutic investigations, including (1) the loading of bioactive materials, (2) the use of stationary, high-gradient (HG) magnetic fields to concentrate magnetic particles in tissues or to separate material bound to the particles from the body, and (3) the application of high power alternating magnetic fields (AMF) to generate heat in magnetic particles for hyperthermic therapeutic applications are then surveyed. Attention is directed mainly to cancer treatment, as selective distribution to tumors is well-suited to particulate approaches and has been a focus of most development efforts. While magnetic particles have been explored for several decades, their use in therapeutic products remains minimal; a discussion of future directions and potential ways to better leverage magnetic properties and to integrate their use into therapeutic regimens is discussed.

Langmuir adsorption study of the interaction of CdSe/ZnS quantum dots with model substrates: influence of substrate surface chemistry and pH

We investigate the utility of Langmuir adsorption measurements for characterizing nanoparticle-substrate interactions. Spherical CdSe/ZnS core-shell nanoparticles were chosen as representative particles because of their widespread use in biological labeling measurements and their relatively monodisperse dimensions. In particular, the quantum dots were functionalized with 11-mercaptoundecanoic acid, and we utilized an amine-terminated self-assembled monolayer (SAM) as a model substrate. SAMs with different end-groups (-CH(3) and -COOH) were also considered to contrast with the adsorption behavior on the amine-terminated SAM substrates. We followed the kinetics of nanoparticle adsorption on the aminosilane layer by quartz crystal microgravimetry (QCM) over a range of particle concentrations and determined the corresponding Langmuir adsorption isotherms. Analysis of both equilibrium adsorption and kinetic adsorption data allowed us to determine a consistent value of the Langmuir adsorption equilibrium constant for the amine-terminated SAM at room temperature (K(L) approximately 2.7 (micromol/L)(-1)), providing a useful characterization of the nanoparticle-substrate interaction. The effect of varying solution pH on Langmuir adsorption was also investigated in order to gain insight into the role of electrostatic interactions on nanoparticle adsorption. The equilibrium extent of adsorption was found to be maximum at about pH 7. These changes of nanoparticle adsorption were further quantified and validated by X-ray photoelectron spectroscopy (XPS) and confocal fluorescence microscopy measurements. We conclude that Langmuir adsorption measurements provide a promising approach for quantifying nanoparticle-substrate interactions.