Micro-/nanostructured mechanical metamaterials

3D Printing by Multiphase Silicone/Water Capillary Inks

3D printing of polymers is accomplished easily with thermoplastics as the extruded hot melt solidifies rapidly during the printing process. Printing with liquid polymer precursors is more challenging due to their longer curing times. One curable liquid polymer of specific interest is polydimethylsiloxane (PDMS). This study demonstrates a new efficient technique for 3D printing with PDMS by using a capillary suspension ink containing PDMS in the form of both precured microbeads and uncured liquid precursor, dispersed in water as continuous medium. The PDMS microbeads are held together in thixotropic granular paste by capillary attraction induced by the liquid precursor. These capillary suspensions possess high storage moduli and yield stresses that are needed for direct ink writing. They could be 3D printed and cured both in air and under water. The resulting PDMS structures are remarkably elastic, flexible, and extensible. As the ink is made of porous, biocompatible silicone that can be printed directly inside aqueous medium, it can be used in 3D printed biomedical products, or in applications such as direct printing of bioscaffolds on live tissue. This study demonstrates a number of examples using the high softness, elasticity, and resilience of these 3D printed structures.

Design for Additive Bio-Manufacturing: From Patient-Specific Medical Devices to Rationally Designed Meta-Biomaterials

Recent advances in additive manufacturing (AM) techniques in terms of accuracy, reliability, the range of processable materials, and commercial availability have made them promising candidates for production of functional parts including those used in the biomedical industry. The complexity-for-free feature offered by AM means that very complex designs become feasible to manufacture, while batch-size-indifference enables fabrication of fully patient-specific medical devices. Design for AM (DfAM) approaches aim to fully utilize those features for development of medical devices with substantially enhanced performance and biomaterials with unprecedented combinations of favorable properties that originate from complex geometrical designs at the micro-scale. This paper reviews the most important approaches in DfAM particularly those applicable to additive bio-manufacturing including image-based design pipelines, parametric and non-parametric designs, metamaterials, rational and computationally enabled design, topology optimization, and bio-inspired design. Areas with limited research have been identified and suggestions have been made for future research. The paper concludes with a brief discussion on the practical aspects of DfAM and the potential of combining AM with subtractive and formative manufacturing processes in so-called hybrid manufacturing processes.

Fabrication of large area flexible nanoplasmonic templates with flow coating

We describe the development of a custom-built two-axis flow coater for the deposition of polymeric nanosphere monolayers that could be used in the fabrication of large area nanoplasmonic films. The technique described here has the capability of depositing large areas (up to 7 in. × 10 in.) of self-assembled monolayers of polymeric nanospheres onto polyethylene terephthalate (PET) films. Here, three sets of films consisting of different diameters (ranging from 100 to 300 nm) of polymeric nanospheres were used to demonstrate the capabilities of this instrument. To improve the surface wettability of the PET substrates during wet-deposition, we enhanced the wettability by using a forced air blown-arc plasma treatment system. Both the local microstructure, as confirmed by scanning electron microscopy, describing monolayer and multilayer coverage, and the overall macroscopic uniformity of the resultant nanostructured film were optimized by controlling the relative stage to blade speed and nanosphere concentration. We also show using a smaller nanoparticle template that such monolayers can be used to form nanoplasmonic films. As this flow-coating approach is a scalable technique, large area films such as the ones described here have a variety of crucial emerging applications in areas such as energy, catalysis, and chemical sensing.

From Flatland to Spaceland: Higher Dimensional Patterning with Two-Dimensional Materials

The creation of three-dimensional (3D) structures from two-dimensional (2D) nanomaterial building blocks enables novel chemical, mechanical or physical functionalities that cannot be realized with planar thin films or in bulk materials. Here, we review the use of emerging 2D materials to create complex out-of-plane surface topographies and 3D material architectures. We focus on recent approaches that yield periodic textures or patterns, and present four techniques as case studies: (i) wrinkling and crumpling of planar sheets, (ii) encapsulation by crumpled nanosheet shells, (iii) origami folding and kirigami cutting to create programmed curvature, and (iv) 3D printing of 2D material suspensions. Work to date in this field has primarily used graphene and graphene oxide as the 2D building blocks, and we consider how these unconventional approaches may be extended to alternative 2D materials and their heterostructures. Taken together, these emerging patterning and texturing techniques represent an intriguing alternative to conventional materials synthesis and processing methods, and are expected to contribute to the development of new composites, stretchable electronics, energy storage devices, chemical barriers, and biomaterials.

Fabrication of flexible highly ordered porous alumina templates by combined nanosphere lithography and anodization

In this work, we propose a new method for the large-scale production of flexible, periodic alumina arrays with well-ordered pores. We show the incorporation of pre-patterning based on polystyrene (PS) nanosphere lithography into an aluminium anodization process. We prepared ordered monolayers of PS spheres with average diameters of (510 ± 10) nm and (430 ± 10) nm on a large area (1.5 × 1.5 cm²) of the Si substrate. Next, we deposited a 5 μm aluminium layer on arrays of PS nanospheres using the sputtering technique. After the deposition, we covered the aluminium film with a polymer Scotch adhesive tape, and separated it from the silicon substrate by ultrasonic-assisted lift-off. Finally, we performed the anodization of the aluminium. We compared the pore and cell sizes, and the pore distance for the templates obtained by this technique, with reference to the templates prepared by a two-step anodization process. Using this new approach, we obtained highly ordered hexagonal 2D lattices over a large area of up to 2 cm² with sparse defects, amounting to not more than four defects per 1000 μm² on average. Here, we show that the use of indentation techniques is not necessary and can be replaced by a fast, cheap and easy pre-patterning step based on nanosphere lithography.

Programmable Kiri-Kirigami Metamaterials

Programmable kirigami metamaterials with controllable local tilting orientations on demand through prescribed notches are constructed through a new approach of kiri-kirgami, and their actuation of pore opening via both mechanical stretching and temperature, along with their potential application as skins for energy-saving buildings, is discussed.

Microscopic full-field three-dimensional strain measurement during the mechanical testing of additively manufactured porous biomaterials

A custom-designed micro-digital image correlation system was used to track the evolution of the full-surface three-dimensional strain field of Ti6Al4V additively manufactured lattice samples under mechanical loading. The high-magnification capabilities of the method allowed to resolve the strain distribution down to the strut level and disclosed a highly heterogeneous mechanical response of the lattice structure with local strain concentrations well above the nominal global strain level. In particular, we quantified that strain heterogeneity appears at a very early stage of the deformation process and increases with load, showing a strain accumulation pattern with a clear correlation to the later onset of the fracture. The obtained results suggest that the unique opportunities offered by the proposed experimental method, in conjunction with analytical and computational models, could serve to provide novel important information for the rational design of additively manufactured porous biomaterials.

Auxetic mechanical metamaterials

We review the topology–property relationship and the spread of Young's modulus–Poisson's ratio duos in three main classes of auxetic metamaterials.

Interferometric analysis of laser-driven cylindrically focusing shock waves in a thin liquid layer

Shock waves in condensed matter are of great importance for many areas of science and technology ranging from inertially confined fusion to planetary science and medicine. In laboratory studies of shock waves, there is a need in developing diagnostic techniques capable of measuring parameters of materials under shock with high spatial resolution. Here, time-resolved interferometric imaging is used to study laser-driven focusing shock waves in a thin liquid layer in an all-optical experiment. Shock waves are generated in a 10 µm-thick layer of water by focusing intense picosecond laser pulses into a ring of 95 µm radius. Using a Mach-Zehnder interferometer and time-delayed femtosecond laser pulses, we obtain a series of images tracing the shock wave as it converges at the center of the ring before reemerging as a diverging shock, resulting in the formation of a cavitation bubble. Through quantitative analysis of the interferograms, density profiles of shocked samples are extracted. The experimental geometry used in our study opens prospects for spatially resolved spectroscopic studies of materials under shock compression.

Highly-stretchable 3D-architected Mechanical Metamaterials

Soft materials featuring both 3D free-form architectures and high stretchability are highly desirable for a number of engineering applications ranging from cushion modulators, soft robots to stretchable electronics; however, both the manufacturing and fundamental mechanics are largely elusive. Here, we overcome the manufacturing difficulties and report a class of mechanical metamaterials that not only features 3D free-form lattice architectures but also poses ultrahigh reversible stretchability (strain > 414%), 4 times higher than that of the existing counterparts with the similar complexity of 3D architectures. The microarchitected metamaterials, made of highly stretchable elastomers, are realized through an additive manufacturing technique, projection microstereolithography, and its postprocessing. With the fabricated metamaterials, we reveal their exotic mechanical behaviors: Under large-strain tension, their moduli follow a linear scaling relationship with their densities regardless of architecture types, in sharp contrast to the architecture-dependent modulus power-law of the existing engineering materials; under large-strain compression, they present tunable negative-stiffness that enables ultrahigh energy absorption efficiencies. To harness their extraordinary stretchability and microstructures, we demonstrate that the metamaterials open a number of application avenues in lightweight and flexible structure connectors, ultraefficient dampers, 3D meshed rehabilitation structures and stretchable electronics with designed 3D anisotropic conductivity.

Topological and geometric measurements of force-chain structure

Developing quantitative methods for characterizing structural properties of force chains in densely packed granular media is an important step toward understanding or predicting large-scale physical properties of a packing. A promising framework in which to develop such methods is network science, which can be used to translate particle locations and force contacts into a graph in which particles are represented by nodes and forces between particles are represented by weighted edges. Recent work applying network-based community-detection techniques to extract force chains opens the door to developing statistics of force-chain structure, with the goal of identifying geometric and topological differences across packings, and providing a foundation on which to build predictions of bulk material properties from mesoscale network features. Here we discuss a trio of related but fundamentally distinct measurements of the mesoscale structure of force chains in two-dimensional (2D) packings, including a statistic derived using tools from algebraic topology, which together provide a tool set for the analysis of force chain architecture. We demonstrate the utility of this tool set by detecting variations in force-chain architecture with pressure. Collectively, these techniques can be generalized to 3D packings, and to the assessment of continuous deformations of packings under stress or strain.

Three-Dimensional Polymeric Mechanical Metamaterials Fabricated by Multibeam Interference Lithography with the Assistance of Plasma Etching

The pentamode structure is a type of mechanical metamaterial that displays dramatically different bulk and shear modulus responses. In this study, a face-centered cubic (FCC) polymeric microstructure was fabricated by using SU8 negative-type photoresists and multibeam interference exposure. Isotropic plasma etching is used to control the solid-volume fraction; for the first time, we obtained a structure with the minimum solid-volume fraction as low as 15% that still exhibited high structural integrity. Using this method, we reduced the width of atom-to-atom connections by up to 40 nm. We characterize the effect of the connection area on the anisotropy of the mechanical properties using simulations. Nanoindentation measurements were also conducted to evaluate the energy dissipation by varying the connection area. The Young's/shear modulus ratio is 5 times higher for the etched microstructure than that of the bulk SU8 materials. The use of interference lithography may enable the properties of microscale materials to be engineered for various applications, such as MEMS.

Origami mechanical metamaterials based on the Miura-derivative fold patterns

This paper presents two new types of origami-inspired mechanical metamaterials based on the Miura-derivative fold patterns that consist of non-identical parallelogram facets. The analytical models to predict dimension changes and deformation kinematics of the proposed metamaterials are developed. Furthermore, by modelling the creases as revolute hinges with certain rotational spring constants, we derived analytical models for stretching and bulk moduli. The analytical models are validated through finite-element simulation results. Numerical examples reveal that the proposed metamaterials possess some intriguing properties, including negative Poisson's ratios and bulk modulus. The work presented in this paper can provide a highly flexible framework for the design of versatile tunable mechanical metamaterials.

Elastic metamaterials for tuning circular polarization of electromagnetic waves

Electromagnetic resonators are integrated with advanced elastic material to develop a new type of tunable metamaterial. An electromagnetic-elastic metamaterial able to switch on and off its electromagnetic chiral response is experimentally demonstrated. Such tunability is attained by harnessing the unique buckling properties of auxetic elastic materials (buckliballs) with embedded electromagnetic resonators. In these structures, simple uniaxial compression results in a complex but controlled pattern of deformation, resulting in a shift of its electromagnetic resonance, and in the structure transforming to a chiral state. The concept can be extended to the tuning of three-dimensional materials constructed from the meta-molecules, since all the components twist and deform into the same chiral configuration when compressed.

Tensional acoustomechanical soft metamaterials

We create acoustomechanical soft metamaterials whose response to uniaxial tensile stressing can be easily tailored by programming acoustic wave inputs, resulting in force versus stretch curves that exhibit distinct monotonic, s-shape, plateau and non-monotonic snapping behaviors. We theoretically demonstrate this unique metamaterial by considering a thin soft material sheet impinged by two counter-propagating ultrasonic wave inputs across its thickness and stretched by an in-plane uniaxial tensile force. We establish a theoretical acoustomechanical model to describe the programmable mechanics of such soft metamaterial, and introduce the first- and second-order tangential stiffness of its force versus stretch curve to boundary different behaviors that appear during deformation. The proposed phase diagrams for the underlying nonlinear mechanics show promising prospects for designing tunable and switchable photonic/phononic crystals and microfluidic devices that harness snap-through instability.

Controlling elastic wave propagation in a soft bilayer system via wrinkling-induced stress patterns

Compression of a film/substrate bilayer system with different surface/interfacial structures can lead to diverse buckling patterns including sinusoidal wrinkles, ridges, folds, creases and tilted sawteeth wrinkles. In this paper, we show that elastic wave band gaps in the film/substrate bilayer system largely depend on the wrinkling patterns. More interestingly, we find that different wrinkling patterns investigated here can coexist and evolve in one bilayer system and the elastic wave propagation behaviors can be controlled by manipulating the hybrid wrinkling patterns. Our analysis also reveals that the periodic stress pattern plays a dominant role in tuning the bandgap structures in comparison to geometrical patterns caused by surface instability. A careful investigation of the transmission spectra of the composite systems has validated the main findings given by the analysis based on the Bloch wave theory. Potential use of the method and materials reported here to gain wide attenuation frequency ranges and the design of nesting Fibonacci superlattices have been demonstrated.

3D Printed Reversible Shape Changing Components with Stimuli Responsive Materials

The creation of reversibly-actuating components that alter their shapes in a controllable manner in response to environmental stimuli is a grand challenge in active materials, structures, and robotics. Here we demonstrate a new reversible shape-changing component design concept enabled by 3D printing two stimuli responsive polymers-shape memory polymers and hydrogels-in prescribed 3D architectures. This approach uses the swelling of a hydrogel as the driving force for the shape change, and the temperature-dependent modulus of a shape memory polymer to regulate the time of such shape change. Controlling the temperature and aqueous environment allows switching between two stable configurations - the structures are relatively stiff and can carry load in each - without any mechanical loading and unloading. Specific shape changing scenarios, e.g., based on bending, or twisting in prescribed directions, are enabled via the controlled interplay between the active materials and the 3D printed architectures. The physical phenomena are complex and nonintuitive, and so to help understand the interplay of geometric, material, and environmental stimuli parameters we develop 3D nonlinear finite element models. Finally, we create several 2D and 3D shape changing components that demonstrate the role of key parameters and illustrate the broad application potential of the proposed approach.

Approaching theoretical strength in glassy carbon nanolattices

The strength of lightweight mechanical metamaterials, which aim to exploit material-strengthening size effects by their microscale lattice structure, has been limited by the resolution of three-dimensional lithography technologies and their restriction to mainly polymer resins. Here, we demonstrate that pyrolysis of polymeric microlattices can overcome these limitations and create ultra-strong glassy carbon nanolattices with single struts shorter than 1 μm and diameters as small as 200 nm. They represent the smallest lattice structures yet produced--achieved by an 80% shrinkage of the polymer during pyrolysis--and exhibit material strengths of up to 3 GPa, corresponding approximately to the theoretical strength of glassy carbon. The strength-to-density ratios of the nanolattices are six times higher than those of reported microlattices. With a honeycomb topology, effective strengths of 1.2 GPa at 0.6 g cm(-3) are achieved. Diamond is the only bulk material with a notably higher strength-to-density ratio.

Controlled Unusual Stiffness of Mechanical Metamaterials

Mechanical metamaterials that are engineered with sub-unit structures present unusual mechanical properties depending on the loading direction. Although they show promise, their practical utility has so far been somewhat limited because, to the best of our knowledge, no study about the potential of mechanical metamaterials made from sophisticatedly tailored sub-unit structures has been made. Here, we present a mechanical metamaterial whose mechanical properties can be systematically designed without changing its chemical composition or weight. We study the mechanical properties of triply periodic bicontinuous structures whose detailed sub-unit structure can be precisely fabricated using various sub-micron fabrication methods. Simulation results show that the effective wave velocity of the structures along with different directions can be designed to introduce the anisotropy of stiffness by changing a volume fraction and aspect ratio. The ratio of Young's modulus to shear modulus can be increased by up to at least 100, which is a 3500% increase over that of isotropic material (2.8, acrylonitrile butadiene styrene). Furthermore, Poisson's ratio of the constituent material changes the ratio while Young's modulus does not influence it. This study presents the promising potential of mechanical metamaterials for versatile industrial and biomedical applications.

Dual step irradiation process for in situ generation and patterning of silver nanoparticles in a photocured film

Novel dual step irradiation process for the in situ generation and patterning of silver nanoparticles in a photocured matrix was developed.

Ultralight shape-recovering plate mechanical metamaterials

Unusual mechanical properties of mechanical metamaterials are determined by their carefully designed and tightly controlled geometry at the macro- or nanoscale. We introduce a class of nanoscale mechanical metamaterials created by forming continuous corrugated plates out of ultrathin films. Using a periodic three-dimensional architecture characteristic of mechanical metamaterials, we fabricate free-standing plates up to 2 cm in size out of aluminium oxide films as thin as 25 nm. The plates are formed by atomic layer deposition of ultrathin alumina films on a lithographically patterned silicon wafer, followed by complete removal of the silicon substrate. Unlike unpatterned ultrathin films, which tend to warp or even roll up because of residual stress gradients, our plate metamaterials can be engineered to be extremely flat. They weigh as little as 0.1 g cm⁻² and have the ability to ‘pop-back' to their original shape without damage even after undergoing multiple sharp bends of more than 90°.

Unusual mechanical properties can be obtained with careful design of metamaterials. Here, Davami et al. use a microscale periodic cellular design to create plate mechanical metamaterials which exhibit ultralow mass per unit area, enhanced bending stiffness and ability to recover after extreme deformations.

Design of Hierarchically Cut Hinges for Highly Stretchable and Reconfigurable Metamaterials with Enhanced Strength

Applying hierarchical cuts to thin sheets of elastomer generates super-stretchable and reconfigurable metamaterials, exhibiting highly nonlinear stress-strain behaviors and tunable phononic bandgaps. The cut concept fails on brittle thin sheets due to severe stress concentration in the rotating hinges. By engineering the local hinge shapes and global hierarchical structure, cut-based reconfigurable metamaterials with largely enhanced strength are realized.

Topologically protected elastic waves in phononic metamaterials

Surface waves in topological states of quantum matter exhibit unique protection from backscattering induced by disorders, making them ideal carriers for both classical and quantum information. Topological matters for electrons and photons are largely limited by the range of bulk properties, and the associated performance trade-offs. In contrast, phononic metamaterials provide access to a much wider range of material properties. Here we demonstrate numerically a phononic topological metamaterial in an elastic-wave analogue of the quantum spin Hall effect. A dual-scale phononic crystal slab is used to support two effective spins for phonons over a broad bandwidth, and strong spin–orbit coupling is realized by breaking spatial mirror symmetry. By preserving the spin polarization with an external load or spatial symmetry, phononic edge states are shown to be robust against scattering from discrete defects as well as disorders in the continuum, demonstrating topological protection for phonons in both static and time-dependent regimes.

Metamaterials are engineered media with properties that mimic those of natural materials, but offer a much wider range of possibilities. Here, the authors numerically demonstrate an elastic-wave analogue of the quantum spin Hall effect in a phononic topological metamaterial.

Snapping mechanical metamaterials under tension

A snapping mechanical metamaterial is designed, which exhibits a sequential snap-through behavior under tension. The tensile response of this mechanical metamaterial can be altered by tuning the architecture of the snapping segments to achieve a range of nonlinear mechanical responses, including monotonic, S-shaped, plateau, and non-monotonic snap-through behavior.

Point group symmetry and deformation-induced symmetry breaking of superlattice materials

The point group symmetry of materials is closely related to their physical properties and quite important for material modelling. However, superlattice materials have more complex symmetry conditions than crystals due to their multi-level structural feature. Thus, a theoretical framework is proposed to characterize and determine the point group symmetry of non-magnetic superlattice materials systematically. A variety of examples are presented to show the symmetry features of superlattice materials in different dimensions and scales. In addition, the deformation-induced symmetry-breaking phenomenon is also studied for superlattice materials, which has potential application in tuning physical properties by imposing a strain field.

Bioactive gyroid scaffolds formed by sacrificial templating of nanocellulose and nanochitin hydrogels as instructive platforms for biomimetic tissue engineering

A sacrificial templating process using lithographically printed minimal surface structures allows complex de novo geo-metries of delicate hydrogel materials. The hydrogel scaffolds based on cellulose and chitin nanofibrils show differences in terms of attachment of human mesenchymal stem cells, and allow their differentiation into osteogenic outcomes. The approach here serves as a first example toward designer hydrogel scaffolds viable for biomimetic tissue engineering.

Nanoarchitectured materials composed of fullerene-like spheroids and disordered graphene layers with tunable mechanical properties

Type-II glass-like carbon is a widely used material with a unique combination of properties including low density, high strength, extreme impermeability to gas and liquid and resistance to chemical corrosion. It can be considered as a carbon-based nanoarchitectured material, consisting of a disordered multilayer graphene matrix encasing numerous randomly distributed nanosized fullerene-like spheroids. Here we show that under both hydrostatic compression and triaxial deformation, this high-strength material is highly compressible and exhibits a superelastic ability to recover from large strains. Under hydrostatic compression, bulk, shear and Young's moduli decrease anomalously with pressure, reaching minima around 1-2 GPa, where Poisson's ratio approaches zero, and then revert to normal behaviour with positive pressure dependences. Controlling the concentration, size and shape of fullerene-like spheroids with tailored topological connectivity to graphene layers is expected to yield exceptional and tunable mechanical properties, similar to mechanical metamaterials, with potentially wide applications.

A compressible scaffold for minimally invasive delivery of large intact neuronal networks

Millimeter to centimeter-sized injectable neural scaffolds based on macroporous cryogels are presented. The polymer-scaffolds are made from alginate and carboxymethyl-cellulose by a novel simple one-pot cryosynthesis. They allow surgical sterility by means of autoclaving, and present native laminin as an attachment motive for neural adhesion and neurite development. They are designed to protect an extended, living neuronal network during compression to a small fraction of the original volume in order to enable minimally invasive delivery. The scaffolds behave as a mechanical meta-material: they are soft at the macroscopic scale, enabling injection through narrow-bore tubing and potentially good cellular scaffold integration in soft target tissues such as the brain. At the same time, the scaffold material has a high local Young modulus, allowing protection of the neuronal network during injection. Based on macroscopic and nanomechanical characterization, the generic geometrical and mechanical design rules are presented, enabling macroporous cellular scaffold injectability.

Well-ordered nanohybrids and nanoporous materials from gyroid block copolymer templates

The design of nanostructured materials and their corresponding morphologies has attracted intense attention because of their effectiveness in tuning electronic, optical, magnetic, and catalytic properties, as well as mechanical properties. Although many technologies have been explored to fabricate nanostructured materials, templated synthesis is one of the most important approaches to fabricate nanostructured materials with precisely controlled structures and morphologies from their constituent components. In this review article, we aim to highlight the use of the self-assembly of block copolymers as an emerging and powerful tool to fabricate well-defined nanomaterials with precise control over the structural dimensions and shape, as well as over the composition and corresponding spatial arrangement. After providing a brief introduction to the synthesis of regular porous materials, including silica- and carbon-based mesoporous materials, the review focuses on the fabrication of well-ordered nanoporous polymers from the selfassembly of degradable block copolymers, in particular with gyroid-forming network morphologies, as templates for the syntheses of various materials with different entities. We highlight the principles of different templated syntheses, from the fundamentals to their practical uses in the fabrication of nanohybrids and nanoporous materials; moreover, we provide an introduction to templates, precursors, solvents, and processing. Finally, some recent examples using block copolymer structure-directed nanomaterials for applications, such as solar cells, catalysis, and drug delivery, are presented. In particular, by taking advantage of the "well-ordered" structural characteristics of the gyroid texture, the properties and applications of 3D regular nanostructures, such as the photonic behavior and optical properties of gyroid-forming nanostructures, as well as of gyroid-forming metamaterials, will be emphasized. Special attention is also given to present new developments and future perspectives in this field.

Dendritic silica particles with center-radial pore channels: promising platforms for catalysis and biomedical applications

Dendritic silica micro-/nanoparticles with center-radial pore structures, a kind of newly created porous material, have attracted considerable attention owing to their unique open three-dimensional dendritic superstructures with large pore channels and highly accessible internal surface areas compared with conventional mesoporous silica nanoparticles (MSNs). They are very promising platforms for a variety of applications in catalysis and nanomedicine. In this review, their unique structural characteristics and properties are first analyzed, then novel and interesting synthesis methods associated with the possible formation mechanisms are summarized to provide material scientists some inspiration for the preparation of this kind of dendritic particles. Subsequently, a few examples of interesting applications are presented, mainly in catalysis, biomedicine, and other important fields such as for sacrificial templates and functional coatings. The review is concluded with an outlook on the prospects and challenges in terms of their controlled synthesis and potential applications.

From 1D to 3D: a new route to fabricate tridimensional structures via photo-generation of silver networks

A time-saving and low-cost method is established to construct stacked 3D structures through the combination of bottom-up and top-down techniques which enables us to create building blocks freely and to precisely adjust the matrix feature.

Self-assembled hierarchical nanostructures for high-efficiency porous photonic crystals

The nanoscale modulation of material properties such as porosity and morphology is used in the natural world to mold the flow of light and to obtain structural colors. The ability to mimic these strategies while adding technological functionality has the potential to open up a broad array of applications. Porous photonic crystals are one such technological candidate, but have typically underachieved in terms of available materials, structural and optical quality, compatibility with different substrates (e.g., silicon, flexible organics), and scalability. We report here an alternative fabrication method based on the bottom-up self-assembly of elementary building blocks from the gas phase into high surface area photonic hierarchical nanostructures at room temperature. Periodic refractive index modulation is achieved by stacking layers with different nanoarchitectures. High-efficiency porous Bragg reflectors are successfully fabricated with sub-micrometer thick films on glass, silicon, and flexible substrates. High diffraction efficiency broadband mirrors (R≈1), opto-fluidic switches, and arrays of photonic crystal pixels with size<10 μm are demonstrated. Possible applications in filtering, sensing, electro-optical modulation, solar cells, and photocatalysis are envisioned.

Hypothesis: bones toughness arises from the suppression of elastic waves

Bone and other natural material exhibit a combination of strength and toughness that far exceeds that of synthetic structural materials. Bone's toughness is a result of numerous extrinsic and intrinsic toughening mechanisms that operate synergistically at multiple length scales to produce a tough material. At the system level however no theory or organizational principle exists to explain how so many individual toughening mechanisms can work together. In this paper, we utilize the concept of phonon localization to explain, at the system level, the role of hierarchy, material heterogeneity, and the nanoscale dimensions of biological materials in producing tough composites. We show that phonon localization and attenuation, using a simple energy balance, dynamically arrests crack growth, prevents the cooperative growth of cracks, and allows for multiple toughening mechanisms to work simultaneously in heterogeneous materials. In turn, the heterogeneous, hierarchal, and multiscale structure of bone (which is generic to biological materials such as bone and nacre) can be rationalized because of the unique ability of such a structure to localize phonons of all wavelengths.

Bioinspired materials: from low to high dimensional structure

The surprising properties of biomaterials are the results of billions of years of evolution. Generally, biomaterials are assembled under mild conditions with very limited supply of constituents available for living organism, and their amazing properties largely result from the sophisticated hierarchical structures. Following the biomimetic principles to prepare manmade materials has drawn great research interests in materials science and engineering. In this review, we summarize the recent progress in fabricating bioinspired materials with the emphasis on mimicking the structure from one to three dimensions. Selected examples are described with a focus on the relationship between the structural characters and the corresponding functions. For one-dimensional materials, spider fibers, polar bear hair, multichannel plant roots and so on have been involved. Natural structure color and color shifting surfaces, and the antifouling, antireflective coatings of biomaterials are chosen as the typical examples of the two-dimensional biomimicking. The outstanding protection performance, and the stimuli responsive and self-healing functions of biomaterials based on the sophisticated hierarchical bulk structures are the emphases of the three-dimensional mimicking. Finally, a summary and outlook are given.

Local to extended transitions of resonant defect modes

We study the localized modes created by introducing a resonant defect in a mechanical lattice. We find that modes introduced by resonant defects have profiles that can be tuned from being extremely localized to totally delocalized by an external force. This is in direct contrast with modes introduced by traditional mass or stiffness defects, in which the modes' profiles stay constant. We present an analytical model for resonant defects in one-dimensional nonlinear lattices, computationally demonstrate the equivalent effect in a two-dimensional lattice, and experimentally observe the mode profiles in a granular crystal. While our study is concerned with nonlinear mechanical lattices, the generality of our model suggests that the same effect should be present in other types of periodic lattices.

Anomalous surface fatigue in a nano-layered material

Nanoscale materials fatigue within a single 7 Å layer of a 2D nano-layered material, muscovite mica, resembles fatigue in macroscopic systems except for two remarkable properties: first, there is an Å-scale precision in the depth of the damage and second, there are sharply defined "magical" stresses, beyond yield, at which the surface remains intact regardless of the number of applications of stress.

Using origami design principles to fold reprogrammable mechanical metamaterials

Although broadly admired for its aesthetic qualities, the art of origami is now being recognized also as a framework for mechanical metamaterial design. Working with the Miura-ori tessellation, we find that each unit cell of this crease pattern is mechanically bistable, and by switching between states, the compressive modulus of the overall structure can be rationally and reversibly tuned. By virtue of their interactions, these mechanically stable lattice defects also lead to emergent crystallographic structures such as vacancies, dislocations, and grain boundaries. Each of these structures comes from an arrangement of reversible folds, highlighting a connection between mechanical metamaterials and programmable matter. Given origami’s scale-free geometric character, this framework for metamaterial design can be directly transferred to milli-, micro-, and nanometer-size systems.

Tailoring and understanding the mechanical properties of nanoparticle-shelled bubbles

One common approach to generate lightweight materials with high specific strength and stiffness is the incorporation of stiff hollow microparticles (also known as bubbles or microballoons) into a polymeric matrix. The mechanical properties of these composites, also known as syntactic foams, greatly depend on those of the hollow microparticles. It is critical to precisely control the properties of these bubbles to fabricate lightweight materials that are suitable for specific applications. In this paper, we present a method to tailor the mechanical properties and response of highly monodisperse nanoparticle-shelled bubbles using thermal treatment. We characterize the mechanical properties of individual as-assembled bubbles as well as those of thermally treated ones using nanoindentation and quantitative in situ compression tests. As-assembled bubbles display inelastic response, whereas thermally treated bubbles behave elastically. We also show that the stiffness and strength of bubbles are enhanced significantly, as much as 12 and 14 times that of the as-assembled bubbles, respectively, via thermal treatment. We complement the experimental results with finite element analysis (FEA) to understand the effect of shell thickness nonuniformity as well as the inelasticity on the mechanical response and fracture behavior of these bubbles. We demonstrate that the failure mechanism of bubbles incorporated into a polymer composite depends on the structure of the bubbles.

Phononic crystal with adaptive connectivity

The band structure of a phononic crystal can be controlled by tuning the mechanical stiffness of the links connecting its constituting elements. The first implementation of a phononic crystal with adaptive connectivity is obtained by using piezoelectric resonators as variable stiffness elements, and its wave-propagation properties are experimentally characterized.

Integrated random-aligned carbon nanotube layers: deformation mechanism under compression

Carbon nanotubes have the potential to construct highly compressible and elastic macroscopic structures such as films, aerogels and sponges. The structure-related deformation mechanism determines the mechanical behavior of those structures and niche applications. Here, we show a novel strategy to integrate aligned and random nanotube layers and reveal their deformation mechanism under uniaxial compression with a large range of strain and cyclic testing. Integrated nanotube layers deform sequentially with different mechanisms due to the distinct morphology of each layer. While the aligned layer forms buckles under compression, nanotubes in the random layer tend to be parallel and form bundles, resulting in the integration of quite different properties (strength and stiffness) and correspondingly distinct plateau regions in the stress-strain curves. Our results indicate a great promise of constructing hierarchical carbon nanotube structures with tailored energy absorption properties, for applications such as cushioning and buffering layers in microelectromechanical systems.

Metamaterials beyond electromagnetism

Metamaterials are rationally designed man-made structures composed of functional building blocks that are densely packed into an effective (crystalline) material. While metamaterials are mostly associated with negative refractive indices and invisibility cloaking in electromagnetism or optics, the deceptively simple metamaterial concept also applies to rather different areas such as thermodynamics, classical mechanics (including elastostatics, acoustics, fluid dynamics and elastodynamics), and, in principle, also to quantum mechanics. We review the basic concepts, analogies and differences to electromagnetism, and give an overview on the current state of the art regarding theory and experiment-all from the viewpoint of an experimentalist. This review includes homogeneous metamaterials as well as intentionally inhomogeneous metamaterial architectures designed by coordinate-transformation-based approaches analogous to transformation optics. Examples are laminates, transient thermal cloaks, thermal concentrators and inverters, 'space-coiling' metamaterials, anisotropic acoustic metamaterials, acoustic free-space and carpet cloaks, cloaks for gravitational surface waves, auxetic mechanical metamaterials, pentamode metamaterials ('meta-liquids'), mechanical metamaterials with negative dynamic mass density, negative dynamic bulk modulus, or negative phase velocity, seismic metamaterials, cloaks for flexural waves in thin plates and three-dimensional elastostatic cloaks.

3D soft metamaterials with negative Poisson's ratio

Buckling is exploited to design a new class of three-dimensional metamaterials with negative Poisson's ratio. A library of auxetic building blocks is identified and procedures are defined to guide their selection and assembly. The auxetic properties of these materials are demonstrated both through experiments and finite element simulations and exhibit excellent qualitative and quantitative agreement.

Mechanical exfoliation and characterization of single- and few-layer nanosheets of WSe₂ , TaS₂ , and TaSe₂

Single- and few-layer transition-metal dichalcogenide nanosheets, such as WSe₂ , TaS₂, and TaSe₂, are prepared by mechanical exfoliation. A Raman microscope is employed to characterize the single-layer (1L) to quinary-layer (5L) WSe₂ nanosheets and WSe₂ single crystals with a laser excitation power ranging from 20 μW to 5.1 mW. Typical first-order together with some second-order and combinational Raman modes are observed. A new peak at around 308 cm⁻¹ is observed in WSe₂ except for the 1L WSe₂, which might arise from interlayer interactions. Red shifting of the A(1g) mode and the Raman peak around 308 cm⁻¹ is observed from 1L to 5L WSe₂. Interestingly, hexagonal- and monoclinic-structured WO₃ thin films are obtained during the local oxidation of thinner (1L-3L) and thicker (4L and 5L) WSe₂ nanosheets, while laser-burned holes are found during the local oxidation of the WSe₂ single crystal. In addition, the characterization of TaS₂ and TaSe₂ thin layers is also conducted.