Development and characterization of pectin films activated by nanoemulsion and Pickering emulsion stabilized marjoram (Origanum majorana L.) essential oil

Pectin-based color indicator films incorporated with spray-dried Hibiscus extract microparticles

Colorimetric films incorporated with anthocyanins as an indicator for freshness monitoring have aroused growing interest recently. The pH-sensing colorimetric film were developed based on pectin (HM), containing aqueous hibiscus extract microparticles (HAE). HAE microparticles were obtained by spray drying with different wall materials (Inulin -IN, maltodextrin- MD and their combination). The films were obtained on large scale by continuous casting. These films were characterized for physicochemical analysis, morphological structure, thermal and barrier properties, antioxidant activity, and color change at different pH. The addition of HAE microparticles caused relevant changes to HM-based films, such as in mechanical behavior and improved barrier property (11-22% WVTR reduction) depending on the type of wall material used and the concentration added. It was verified with the thermal stability of films, with a slight increase being observed. The color variation of smart films was entirely pH-dependent. Overall, the proposed color indicator films showed unique features and functionalities and could be used as an alternative natural pH indicator in smart packaging systems.

Hyaluronic acid-rich burger separator edible disc prepared from slaughterhouse waste

In this study, the edible films from chicken feet (CF), ovine muscle fascia (MF), and bovine bone gelatin (Gel) were prepared and their characteristics were analyzed, and we also evaluated the sensory quality of raw and cooked hamburgers using the edible films. The quantities of the CF and MF hyaluronic acid were evaluated using colorimetry and spectrophotometry. The CF, MF, and Gel films were prepared by solvent casting method. Results indicated that the concentration of hyaluronic acid in CF (124.11 ppm) was greater than MF (101.11 ppm). The antioxidative property of the CF film (18.47%) was greater than the Gel (1.88%) and MF (Undetectable) film. The CF film was more resistant to water vapor permeability (2.75 × 10-9 g/m.s.pa) than the MF (1.57 × 10-8 g/m.s.pa) and Gel (1.5 × 10-7 g/m.s.pa) films. The Gel film had more appropriate mechanical properties than CF and MF films. The films kept burgers patties independent from one another and prevented them from sticking and freezing together. MF and CF films were able to promote the organoleptic properties of raw and cooked hamburgers in taste and texture.

Chestnut Starch Nanocrystal Combined with Macadamia Protein Isolate to Stabilize Pickering Emulsions with Different Oils

This study investigated the formation and molecular interaction mechanism of chestnut starch nanocrystal (SNC)/macadamia protein isolate (MPI) complexes and their application in edible oil-in-water Pickering emulsion (PE). SNC/MPI complexes were characterized by scanning electron microscopy and particle size analyzer. The PEs stabilized by SNC/MPI complexes were characterized by confocal laser scanning microscopy and rheological measurement. The results showed that hydrogen bonds between the two particles significantly affected the secondary structure and assembly of SNC/MPI complexes at the oil/water interface. The optimal mass ratio of SNC to MPI in the complexes with the best stability was determined as 20:1. The formation of edible oil-in-water PEs stabilized by SNC/MPI complexes significantly improved the oxidative and storage stability of different edible oils (olive oil, walnut oil, edible tea oil, and macadamia oil). These different edible oil-in-water PEs stabilized by SNC/MPI could be used as effective carriers of quercetin with their loading rates higher than 93%.

Edible hyaluronic acid-rich burger separator discs prepared from slaughterhouse waste

In this study, edible films from chicken feet extract (CF), ovine muscle fascia extract (MF), and bovine bone gelatin powder (Gel) were prepared and their characteristics were analyzed. We also used the films as separators of burger cuts and evaluated the organoleptic characteristics of cooked burgers. Hyaluronic acid quantities of CF and MF were measured using colorimetric and spectrophotometry. Results indicated that the concentration of hyaluronic acid in CF (124.11 ppm) was greater than MF (101.11 ppm). The antioxidative property of the CF film (18.47%) was greater than the Gel (1.88%) and MF (Undetectable) films. The CF film was more resistant to water vapor permeability (2.75 × 10-9 g/m.s.pa) than the MF (1.57 × 10-8 g/m.s.pa) and Gel (1.5 × 10-7 g/m.s.pa) films. The Gel film had more appropriate mechanical properties than CF and MF films. The films kept burgers patties independent from one another and prevented them from sticking and freezing together. MF and CF films were able to promote the organoleptic properties of cooked burgers in taste and texture.

Chitosan films with tunable droplet size of Pickering emulsions stabilized by amphiphilic konjac glucomannan network

In this work, chitosan (CS) emulsion films were prepared with grapefruit essential oil (GEO) Pickering emulsions (OGEOs) stabilized by amphiphilic octenyl succinic anhydride (OSA) konjac glucomannan (OSA-KGM) network. The droplet size of emulsion was regulated by altering oil content in OGEOs (10 %, 20 %, 30 % and 40 %, w/w). The structural and physicochemical properties of CS films with tunable emulsion droplets (OGEOs) were investigated. The droplet size of OGEOs increased with the increasing content of GEO. FT-IR revealed that the formation of CS-OGEOs films was attributed to hydrogen bonding. CS-OGEOs films with large droplets presented smoother surface, enhanced water resistance, UV-shielding property, mechanical properties, but increased water vapor permeability (WVP) compared with CS-OGEOs films with small droplets. In addition, CS-OGEOs films with large droplets also presented compact film structure, controlled release of GEO, high efficiency of DPPH free radical scavenging and antibacterial activity. To sum up, incorporation of emulsion droplets was a good strategy for improving the structural and physicochemical properties of CS films.

In vitro evaluation of antioxidant activity and determination of total phenolic and flavonoids contents of ethanol-water extracts of Paeonia lactiflora and Calendula officinalis L. petals

In this study, the petals collected from peony hybrid Paeonia lactiflora "Bowl of beauty" and Calendula officinalis L. were extracted using ethanol-water mixture assisted with microwave and ultrasonic treatment. The isolation of Calendula officinalis L. essential oil was done by hydrodistillation as well. The total phenolic and flavonoids content in the extracts and oil were determined and their antioxidant activity was evaluated. The highest total phenolic content was found for the extracts of hybrid Paeonia lactiflora and Calendula officinalis L. obtained by ultrasound extraction (9.73 and 10.03 mg GA/mL RE, respectively), while the highest flavonoid content was obtained by microwave-assisted extraction (14.45 and 6.02 mg QE/mL RE, respectively). Antioxidant activity was assessed using standard antioxidant in vitro DPPH• and ABTS•+ assays. The highest antioxidant activity was obtained in DPPH• and ABTS•+ assay for the microwave-assisted extraction of hybrid Paeonia lactiflora (79% and 83%) and ultrasound-assisted extraction of Calendula officinalis L. (45% and 49%), respectively. In order to improve the antioxidative activity of both extract and essential oil the pectin films with gallic acid, using enzymatically assisted catalysis to attain covalent bonding to a carrier, were prepared. Optical microscopy and FTIR spectroscopy were used for the characterization of obtained materials. The films, with essential oil of Calendula officinalis L. and gallic acid, showed significantly increased percentage inhibition in DPPH• and ABTS•+ test (91% and 95%, respectively) after 10 minutes. The results, also, showed that all formulations of pectin biopolymer film, modified with gallic acid, can be successfully applied as a carrier for both types of ingredients.

Cold Plasma-Based Fabrication and Characterization of Active Films Containing Different Types of Myristica fragrans Essential Oil Emulsion

Myristica fragrans essential oil (MFEO) is a potential active compound for application as an active packaging material. A new approach was developed using a cold plasma treatment to incorporate MFEO to improve the optical, physical, and bacterial inhibition properties of the film. The MFEO was added as coarse emulsion (CE), nanoemulsion (NE), and Pickering emulsion (PE) at different concentrations. The PE significantly affected (p < 0.05) the optical, physical, and chemical properties compared with CE and NE films. The addition of MFEO to low-density polyethylene (LDPE) film significantly reduced water vapor permeability (WVP) and oxygen permeability (OP) and showed marked activity against E. coli and S. aureus (p < 0.05). The release rate of PE films after 30 h was 70% lower than that of CE and NE films. Thus, it can be concluded that the fabrication of active packaging containing MFEO is a potential food packaging material.

Chitosan/zein films incorporated with essential oil nanoparticles and nanoemulsions: Similarities and differences

The purpose of this study was to prepare chitosan/zein (CS/Zein) edible films reinforced with Mosla chinensis essential oils (EOs) nanoemulsions (NEs) and nanoparticles (NPs) in order to compare their properties. NEs and NPs containing EOs could be used to fabricate films with functional properties, and the films were prepared using a casting method. The influence of EO concentration and mixing methods on the physical, mechanical, and functional properties of the films was investigated. The results indicated that the films formulated with EO NEs generated favorable fundamental and functional characteristics with excellent mechanical properties, moisture barrier capacity, and significant antioxidant and antibacterial activity. In addition, the use of NEs-based films improved the release of bioactive compounds, and the mechanism of EO release was found to follow a first order model. In summary, EO NEs were more effective in preserving the fundamental and functional properties of CS/Zein nanocomposite edible films than NP-based films. These differences may reflect different forms and methods of dispersing EOs in NEs and NPs. This study demonstrated that NEs reinforced films could be used to enhance the effectiveness of EOs in food products and develop new strategies for their delivery and application.

Targeting foodborne pathogens via surface-functionalized nano-antimicrobials

The incorporation of antibiotics and bioactive compounds into non-toxic nanoparticles has been popularly used to produce effective antimicrobial nanocarriers against foodborne pathogens. These systems can protect antimicrobials against harsh environments, control their release, and increase their antimicrobial activities; however, their functions can be decreased by some major barriers. Intracellular localization of bacteria protects them from the host immune system and antimicrobial agents. Also, bacteria can cause constant infection by nestling in professional phagocytic cells. In the last years, surface functionalization of nanocarriers by passive and active modification methods has been applied for their protection against clearance from the blood, increasing both circulation time and uptake by target cells. For achieving this objective, different functional agents such as specifically targeted peptides internalize ligands, saccharide ligands, or even therapeutic molecules (e.g., antibodies or enzymes) are used. In this review, techniques for functionalizing the surface of antimicrobial-loaded nanocarriers have been described. This article offers a comprehensive review of the potential of functional nanoparticles to increase the performance of antimicrobials against foodborne pathogens through targeting delivery.

Origanum majorana L. Essential Oil-Coated Paper Acts as an Antimicrobial and Antioxidant Agent against Meat Spoilage

This study first-ever tested the impact of active packaging paper coated with cationic starch containing Origanum majorana L. essential oil with 69.26% carvacrol polyphenol on the physical, chemical, and microbiological quality of minced beef stored at +4 °C for 0, 6, and 12 days. An analysis of electron scanning microscopy and infrared spectroscopy showed origanum oil entrapment on paper. Meat samples packaged without origanum oil at 6th and 12th days of storage were unfit for consumption. In contrary, origanum oil significantly reduced microbial counts by 2.5 log 10 CFU/g, the peroxide value by 22%, lipid oxidation by 22, the pH-dependent meat spoilage value by 27%, dry matter losses by 7%, and antioxidant activity losses by 40% and restored color and odor reductions. Origanum oil extended the shelf-life of minced beef up to the 6th day of cold storage with no negative effect on meat color and odor.

Polysaccharide-Based Edible Films Incorporated with Essential Oil Nanoemulsions: Physico-Chemical, Mechanical Properties and Its Application in Food Preservation-A Review

Edible films with essential oils (EOs) are becoming increasingly popular as an alternative to synthetic packaging due to their environmentally friendly properties and ability as carriers of active compounds. However, the required amounts of EOs to impart effective antimicrobial properties generally exceed the organoleptic acceptance levels. However, by nanoemulsifying EOs, it is possible to increase their antimicrobial activity while reducing the amount required. This review provides an overview of the physico-chemical and mechanical properties of polysaccharide-based edible films incorporated with EOs nanoemulsions and of their application to the preservation of different food types. By incorporating EOs nanoemulsions into the packaging matrix, these edible films can help to extend the shelf-life of food products while also improving the quality and safety of the food product during storage. It can be concluded that these edible films have the potential to be used in the food industry as a green, sustainable, and biodegradable method for perishable foods preservation.

Nanocarriers for Sustainable Active Packaging: An Overview during and Post COVID-19

Lockdown has been installed due to the fast spread of COVID-19, and several challenges have occurred. Active packaging was considered a sustainable option for mitigating risks to food systems during COVID-19. Biopolymeric-based active packaging incorporating the release of active compounds with antimicrobial and antioxidant activity represents an innovative solution for increasing shelf life and maintaining food quality during transportation from producers to consumers. However, food packaging requires certain physical, chemical, and mechanical performances, which biopolymers such as proteins, polysaccharides, and lipids have not satisfied. In addition, active compounds have low stability and can easily burst when added directly into biopolymeric materials. Due to these drawbacks, encapsulation into lipid-based, polymeric-based, and nanoclay-based nanocarriers has currently captured increased interest. Nanocarriers can protect and control the release of active compounds and can enhance the performance of biopolymeric matrices. The aim of this manuscript is to provide an overview regarding the benefits of released active compound-loaded nanocarriers in developing sustainable biopolymeric-based active packaging with antimicrobial and antioxidant properties. Nanocarriers improve physical, chemical, and mechanical properties of the biopolymeric matrix and increase the bioactivity of released active compounds. Furthermore, challenges during the COVID-19 pandemic and a brief post-COVID-19 scenario were also mentioned.

Effect of mung bean protein isolate/pullulan films containing marjoram (Origanum majorana L.) essential oil on chemical and microbial properties of minced beef meat

In this study, the effect of marjoram essential oil (MEO) on the mechanical, barrier, antioxidant and antimicrobial properties of mung bean protein isolate (MPI)/pullulan (PU) composite films and its influence on the quality of minced beef meat during 14 days storage at 4 °C was studied. The Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM) results confirmed the compatibility between components. Also, depend on the different ratios of combination of MEO and MPI/PU, tensile strength (TS) and elongation at break (EAB) were varied. The results showed that an increase in the level of the MPI led to a significant increment in TS and water-proof properties of the composite films. Also, with addition of MEO, the EAB of the antimicrobial blend-films was decreased, while TS and water-proof properties were increased. In addition, enrichment of the films with MEO led to a considerable positive effect on DPPH radical scavenging and antibacterial activity against pathogenic bacteria (Staphylococcus aureus and Escherichia coli). Based on the bacterial and chemical analyses of the minced meat samples, MEO-incorporation in MPI/PU films enhanced oxidative stability of minced beef samples, and also showed effective antimicrobial activity against all of the tested bacteria.

In vitro evaluation of antioxidative activities of the extracts of petals of Paeonia lactiflora and Calendula officinalis incorporated in the new forms of biobased carriers

In this study, the petals collected from peony hybrid Paeonia lactiflora "Bowl of Beauty" and Calendula officinalis L. were extracted using an ethanol-water mixture assisted with microwave and ultrasonic treatment. The isolation of Calendula officinalis L. essential oil was done by hydrodistillation as well. The total phenolic and flavonoids content in the extracts and oil were determined and their antioxidant activity was evaluated. The highest total phenolic content was found for the extracts of hybrid P. lactiflora and C. officinalis L. obtained by ultrasound extraction (83.16 and 114.47 mg GA/g, respectively), while the flavonoid content obtained by microwave-assisted extraction was relatively high (123.48 and 65.29 mg QE/g, respectively). The highest antioxidant activity was obtained in DPPH• and ABTS•+ assay for the microwave-assisted extraction of hybrid P. lactiflora (79% and 83%) and ultrasound-assisted extraction of C. officinalis L. (45% and 49%), respectively. To improve antioxidant activity of both types of examined analytes (extracts and essential oil), the pectin biopolymer film (as a carrier) was prepared in the process of enzymatically assisted catalysis. Optical microscopy and FTIR spectroscopy were used for the characterization of obtained materials. The films, with essential oil of C. officinalis L. and gallic acid, showed significantly increased percentage inhibition in DPPH• and ABTS•+ test (91% and 95%, respectively) after 10 minutes. The results, also, showed that all formulations of pectin biopolymer film, modified with gallic acid, can be successfully applied as a carrier for both types of ingredients.

Development of Polyvinyl Alcohol/Kaolin Sponges Stimulated by Marjoram as Hemostatic, Antibacterial, and Antioxidant Dressings for Wound Healing Promotion

The predominant impediments to cutaneous wound regeneration are hemorrhage and bacterial infections that lead to extensive inflammation with lethal impact. We thus developed a series of composite sponges based on polyvinyl alcohol (PVA) inspired by marjoram essential oil and kaolin (PVA/marjoram/kaolin), adopting a freeze-thaw method to treat irregular wounds by thwarting lethal bleeding and microbial infections. Microstructure analyses manifested three-dimensional interconnected porous structures for PVA/marjoram/kaolin. Additionally, upon increasing marjoram and kaolin concentrations, the pore diameters of the sponges significantly increased, recording a maximum of 34 ± 5.8 µm for PVA-M0.5-K0.1. Moreover, the porosity and degradation properties of PVA/marjoram/kaolin sponges were markedly enhanced compared with the PVA sponge with high swelling capacity. Furthermore, the PVA/marjoram/kaolin sponges exerted exceptional antibacterial performance against Escherichia coli and Bacillus cereus, along with remarkable antioxidant properties. Moreover, PVA/marjoram/kaolin sponges demonstrated significant thrombogenicity, developing high thrombus mass and hemocompatibility, in addition to their remarkable safety toward fibroblast cells. Notably, this is the first study to our knowledge investigating the effectiveness of marjoram in a polymeric carrier for prospective functioning as a wound dressing. Collectively, the findings suggest the prospective usage of the PVA-M0.5-K0.1 sponge in wound healing for hemorrhage and bacterial infection control.

Physical, Mechanical, and Water Vapor Barrier Properties of Starch/Cellulose Nanofiber/Thymol Bionanocomposite Films

The application of starch films, such as food packaging materials, has been restricted due to poor mechanical and barrier properties. However, the addition of a reinforcing agent, cellulose nanofibers (CNF) and also thymol, into the films, may improve the properties of films. This work investigates the effects of incorporating different concentrations of thymol (3, 5, 7, and 10 wt.%) on physical, mechanical, water vapor barrier, and antibacterial properties of corn starch films, containing 1.5 wt.% CNF produced using the solvent casting method. The addition of thymol does not significantly affect the color and opacity of the films. It is found that the tensile strength and Young’s modulus of the films decreases from 10.6 to 6.3 MPa and from 436.9 to 209.8 MPa, respectively, and the elongation at break increased from 110.6% to 123.5% with the incorporation of 10 wt.% thymol into the films. Furthermore, the addition of thymol at higher concentrations (7 and 10 wt.%) improved the water vapor barrier of the films by approximately 60.0%, from 4.98 × 10^—9 to 2.01 × 10^—9 g/d.m.Pa. Starch/CNF/thymol bionanocomposite films are also found to exhibit antibacterial activity against Escherichia coli. In conclusion, the produced starch/CNF/thymol bionanocomposite films have the potential to be used as antibacterial food packaging materials.

Bioactive pectic polysaccharides from bay tree pruning waste: Sequential subcritical water extraction and application in active food packaging

The potential isolation of bio-active polysaccharides from bay tree pruning waste was studied using sequential subcritical water extraction using different time-temperature combinations. The extracted polysaccharides were highly enriched in pectins while preserving their high molecular mass (10-100 kDa), presenting ideal properties for its application as additive in food packaging. Pectin-enriched chitosan films were prepared, improving the optical properties (≥95% UV-light barrier capacity), antioxidant capacity (˃95% radical scavenging activity) and water vapor permeability (≤14 g·Pa-1·s-1·m-1·10-7) in comparison with neat chitosan-based films. Furthermore, the antimicrobial activity of chitosan was maintained in the hybrid films. Addition of 10% of pectins improved mechanical properties, increasing the Young's modulus 12%, and the stress resistance in 51%. The application of pectin-rich fractions from bay tree pruning waste as an additive in active food packaging applications, with triple action as antioxidant, barrier, and antimicrobial has been demonstrated.

Carrageenan/agar-based functional film integrated with zinc sulfide nanoparticles and Pickering emulsion of tea tree essential oil for active packaging applications

A functional carrageenan/agar-based film was prepared by combining tea tree oil Pickering emulsion (PET) and zinc sulfide nanoparticles (ZnSNP). PET was formulated using tea tree essential oil stabilized with nanocellulose fibers. PET and ZnSNPs were uniformly dispersed in the binary polymer matrix and formed compatible films. The incorporation of ZnSNPs improved the mechanical strength, whereas PET slightly decreased the strength, but the combined addition of ZnSNP and PET maintained the mechanical strength with slightly improved flexibility. The addition of ZnSNP and PET, alone or in combination, slightly improved the water vapor barrier, water resistance, and thermal stability of the film. In addition, the carrageenan/agar-based composite membrane showed distinct antioxidant and antibacterial activity. The ZnSNP and PET incorporated binary composite films with enhanced physical and functional properties are likely to be used in active food packaging applications.

Chitosan-based nanocomposite films incorporated with NiO nanoparticles: Physicochemical, photocatalytic and antimicrobial properties

The aim of this research was to fabricate active nanocomposite films by incorporation of nickel oxide nanoparticles (NiONPs) (3, 6 and 9% w/w) into the chitosan-based films. The NiONPs were synthesized by solution combustion method and the films were prepared by solvent casting method. The formation of new interactions and increasing of films' crystallinity were confirmed by FT-IR and XRD analyses. Uniform dispersion of NiONPs at lower concentrations and their aggregation at level of 9% was confirmed by FE-SEM observations. Water barrier properties, tensile strength, thermal properties and surface hydrophobicity of films enhanced by addition of 6% NiONPs. Photocatalytic activity of nanocomposites was confirmed by absorption of 72% of methyl orange during 270 min under UV irradiation. The nanocomposite films exhibited good antibacterial activity against gram-positive (S. aureus) and gram-negative (S. typhimurium) bacteria. Therefore, the chitosan-NiONPs nanocomposite films could be used for active food packaging applications and photodecolorization purposes.

Stabilization Techniques of Essential Oils by Incorporation into Biodegradable Polymeric Materials for Food Packaging

Human health, food spoilage, and plastic waste, which are three great topical concerns, intersect in the field of food packaging. This has created a trend to replace synthetic food preservatives with natural ones, to produce bio-functional food packaging, and to shift towards biodegradable polymeric materials. Among the natural bioactive agents, essential oils are gaining more and more attention in food packaging applications due to their various benefits and fewer side-effects. However, their volatility, hydrophobicity, and strong odor and taste limit the direct use in food-related applications. Fixation into polymeric matrices represents a suitable strategy to promote the benefits and reduce the drawbacks. Emulsification and electrospinning are largely used techniques for protection and stabilization of essential oils. These methods offer various advantages in active food packaging, such as controlled release, ensuring long-term performance, decreased amounts of active agents that gain enhanced functionality through increased available surface area in contact with food, and versatility in packaging design. This review focuses on creating correlations between the use of essential oils as natural additives, stabilization methods, and biodegradable polymeric matrices or substrates in developing bioactive food packaging materials. Documentation was performed via the Scopus, ScienceDirect, and PubMed databases, selecting the publications after the year 2018. Particular attention was given to the publications that tested materials on food/food pathogens to evaluate their performances in retarding spoilage. Research gaps were also identified on the topic, materials being tested mainly at short time after preparation without considering the long-term storage that usually occurs in actual practice between production and use, and insufficient research related to upscaling.

Nanoemulsions as Edible Coatings: A Potential Strategy for Fresh Fruits and Vegetables Preservation

Fresh fruits and vegetables are perishable commodities requiring technologies to extend their postharvest shelf life. Edible coatings have been used as a strategy to preserve fresh fruits and vegetables in addition to cold storage and/or controlled atmosphere. In recent years, nanotechnology has emerged as a new strategy for improving coating properties. Coatings based on plant-source nanoemulsions in general have a better water barrier, and better mechanical, optical, and microstructural properties in comparison with coatings based on conventional emulsions. When antimicrobial and antioxidant compounds are incorporated into the coatings, nanocoatings enable the gradual and controlled release of those compounds over the food storage period better than conventional emulsions, hence increasing their bioactivity, extending shelf life, and improving nutritional produce quality. The main goal of this review is to update the available information on the use of nanoemulsions as coatings for preserving fresh fruits and vegetables, pointing to a prospective view and future applications.