Copper-Based Metal-Organic Framework Nanoparticles with Peroxidase-Like Activity for Sensitive Colorimetric Detection of Staphylococcus aureus

Electrochemical/visual dual-readout aptasensor for Ochratoxin A detection integrated into a miniaturized paper-based analytical device

Development of portable, sensitive and reliable devices for Ochratoxin A (OTA) detection is highly demanded, especially for resource-limited regions. Herein, a novel paper-based analytical device (PAD) is designed through wax printing and screen-printed technologies, which integrates sample flowing, electrode modification, cleaning and electrochemical (EC)/colorimetric signal output. To greatly enhance the detection sensitivity, we synthesized a chitosan functionalized MoS₂-Au@Pt (Ch-MoS₂-Au@Pt) via electrostatic self-assembly, and used it to immobilize the label aptamer (apta₂) for signal regulation and amplification. Concretely, with the addition of analytes, the Ch-MoS₂-Au@Pt-apta₂ could be combined on the sensing interface by specific biorecognition and catalyzed reduction of H₂O₂, resulting in a remarkable EC response. Meanwhile, the released hydroxyl radicals (·OH) flowed to the visualization zone and promoted the oxidation of 3,3',5,5'-tetramethylbenzidine for colorimetric detection. Consequently, the dual-mode PAD achieved acceptable prediction and accurate analysis in the range of 0.1-200 ng mL^-1 and 1 × 10^-4-200 ng mL^-1 by matching the visual and EC signal intensity, respectively. Compared with traditional single-mode sensor for OTA, the proposed dual-mode aptasensor featuring independent signal conversion and readout, not only avoided the false-positive signal associated with detection condition and operation, but also enlarged the detection ranges and improved the sensitivity. Furthermore, the consistency of EC/colorimetric assay was validated in real OTA samples. Overall, this work provided a portable, cost-effective, sensitive and visualized aptasensor platform, which could be extended to various other mycotoxins in the field of food safety.

The intrinsic enzyme mimetic activity of platinum oxide for biosensing of glucose

Given the enzymatic properties and the oxidized surface of Pt nanomaterials, we demonstrated the intrinsic oxidase-like and peroxidase-like activities of platinum oxide (PtO₂). The surface clean PtO₂ nanoparticles with high water dispersibility were synthesized by a simple and green method. X-ray diffraction (XRD) and X-ray photoelectron spectra (XPS) results demonstrated that the prepared PtO₂ nanoparticles mainly consisted of Pt (Ⅳ) state without Pt(0) chemical state. The enzymatic activity of PtO₂ nanoparticles was verified by catalytic oxidation of several chromogenic substrates. Catalytic mechanism analysis suggested that PtO₂ nanopartiles acted as peroxidase and oxidase enzyme mimics by promoting the generation of the reactive oxygen species (ROS). By combining glucose oxidase, a colorimetric assay for glucose detection was developed with the limit of detection of 10.8 μM. The successful application of the proposed detection assay in human serum samples demonstrated the promising practical application in clinical diagnosis, pharmacy and food.

Applications of DNA-nanozyme-based sensors

Since the discovery of the enzyme-like activities of nanomaterials, the study of nanozymes has become one of the most popular research frontiers of diverse areas including biosensors. DNA also plays a very important role in the construction of biosensors. Thus, the idea of combined applications of nanozymes with DNA (DNA-nanozyme) is very attractive for the development of nanozyme-based biosensors, which has attracted considerable interest of researchers. To date, many sensors based on DNA-functionalized or templated nanozymes have been reported for the detection of various targets and highly accelerated the development of nanozyme-based sensors. In this review, we summarize the main applications and advances of DNA-nanozyme-based sensors. Additionally, perspectives and challenges are also discussed at the end of the review.

A microfluidic biosensor for rapid and automatic detection of Salmonella using metal-organic framework and Raspberry Pi

Rapid screening of pathogenic bacteria contaminated foods is crucial to prevent food poisoning. However, available methods for bacterial detection are still not ready for in-field screening because culture is time-consuming; PCR requires complex DNA extraction and ELISA lacks sensitivity. In this study, a microfluidic biosensor was developed for rapid, sensitive and automatic detection of Salmonella using metal-organic framework (MOF) NH₂-MIL-101(Fe) with mimic peroxidase activity to amplify biological signal and Raspberry Pi with self-developed App to analyze color image. First, the target bacteria were separated and concentrated with the immune magnetic nanobeads (MNBs), and labeled with the immune MOFs to form MNB-Salmonella-MOF complexes. Then, the complexes were used to catalyze colorless o-phenylenediamine and H₂O₂ to produce yellow 2,3-diaminophenazine (DAP). Finally, the image of the catalysate was collected under the narrow-band blue light and analyzed using the Raspberry Pi App to determine the bacterial concentration. The experimental results showed that this biosensor was able to detect Salmonella Typhimurium from 1.5 × 10¹ to 1.5 × 10⁷ CFU/mL in 1 h with the lower detection limit of 14 CFU/mL. The mean recovery for Salmonella in spiked chicken meats was ~112%. This biosensor integrating mixing, separation, labelling and detection onto a single microfluidic chip has demonstrated the merits of automatic operation, fast reaction, less reagent and small size, and is promising for in-field detection of foodborne bacteria.

Nanotheranostics: A Possible Solution for Drug-Resistant Staphylococcus aureus and their Biofilms?

Staphylococcus aureus is a notorious pathogen that colonizes implants (orthopedic and breast implants) and wounds with a vicious resistance to antibiotic therapy. Methicillin-resistant S. aureus (MRSA) is a catastrophe mainly restricted to hospitals and emerged to community reservoirs, acquiring resistance and forming biofilms. Treating biofilms is problematic except via implant removal or wound debridement. Nanoparticles (NPs) and nanofibers could combat superbugs and biofilms and rapidly diagnose MRSA. Nanotheranostics combine diagnostics and therapeutics into a single agent. This comprehensive review is interpretative, utilizing mainly recent literature (since 2016) besides the older remarkable studies sourced via Google Scholar and PubMed. We unravel the molecular S. aureus resistance and complex biofilm. The diagnostic properties and detailed antibacterial and antibiofilm NP mechanisms are elucidated in exciting stories. We highlight the challenges of bacterial infections nanotheranostics. Finally, we discuss the literature and provide "three action appraisals". (i) The first appraisal consists of preventive actions (two wings), avoiding unnecessary hospital visits, hand hygiene, and legislations against over-the-counter antibiotics as the general preventive wing. Our second recommended preventive wing includes preventing the adverse side effects of the NPs from resistance and toxicity by establishing standard testing procedures. These standard procedures should provide breakpoints of bacteria's susceptibility to NPs and a thorough toxicological examination of every single batch of synthesized NPs. (ii) The second appraisal includes theranostic actions, using nanotheranostics to diagnose and treat MRSA, such as what we call "multifunctional theranostic nanofibers. (iii) The third action appraisal consists of collaborative actions.

Does the intrinsic photocontrollable oxidase-mimicking activity of 2-aminoterephthalic acid dominate the activity of metal–organic frameworks?

The ligand ATA possesses intrinsic photocontrolled oxidase-like activity, showing promise in designing ATA-MOF with photoresponsive enzyme-like activity like Al-ATA and establishing the colorimetric strategy for Cu²⁺ detection.

A label-free electrochemical aptasensor based on the core-shell Cu-MOF@TpBD hybrid nanoarchitecture for the sensitive detection of PDGF-BB

As one of the significant serum cytokines, platelet-derived growth factor-BB (PDGF-BB) is a crucial protein biomarker overexpressed in human life-threatening tumors, the sensitive identification and quantification of which are urgently desired but challenging. Herein we report a novel core-shell nanoarchitecture consisting of Cu-based metal-organic frameworks (Cu-MOFs) and covalent organic frameworks (denoted as TpBD-COFs), which was used to prepare an aptasensor for the detection of platelet-derived growth factor-BB (PDGF-BB). The central Cu-MOFs function as signal labels with no need for extra redox media, whereas the porous TpBD serves as the shell to immobilize the PDGF-BB-targeted aptamer strands in abundance via strong interactions involving π-π stacking, electrostatic, and hydrogen bonding interactions. The proposed aptasensor based on Cu-MOF@TpBD can achieve a detection limit as low as 0.034 pg mL^-1 within the dynamic detection range from 0.0001 to 60 ng mL^-1. The hybridization of MOFs and COFs, together with the immobilization with the specific analyte targeted aptamer, provides a promising and propagable approach to prepare an aptasensor for the simple, sensitive, and selective detection of a specific biomarker in clinical diagnosis.

Metal-Organic-Framework-Engineered Enzyme-Mimetic Catalysts

Nanomaterial-based enzyme-mimetic catalysts (Enz-Cats) have received considerable attention because of their optimized and enhanced catalytic performances and selectivities in diverse physiological environments compared with natural enzymes. Recently, owing to their molecular/atomic-level catalytic centers, high porosity, large surface area, high loading capacity, and homogeneous structure, metal-organic frameworks (MOFs) have emerged as one of the most promising materials in engineering Enz-Cats. Here, the recent advances in the design of MOF-engineered Enz-Cats, including their preparation methods, composite constructions, structural characterizations, and biomedical applications, are highlighted and commented upon. In particular, the performance, selectivities, essential mechanisms, and potential structure-property relations of these MOF-engineered Enz-Cats in accelerating catalytic reactions are discussed. Some potential biomedical applications of these MOF-engineered Enz-Cats are also breifly proposed. These applications include, for example, tumor therapies, bacterial disinfection, tissue regeneration, and biosensors. Finally, the future opportunities and challenges in emerging research frontiers are thoroughly discussed. Thereby, potential pathways and perspectives for designing future state-of-the-art Enz-Cats in biomedical sciences are offered.

Fe-N-C single-atom nanozymes with peroxidase-like activity for the detection of alkaline phosphatase

Single-atom nanozymes have drawn wide attention in bio-sensing for their remarkable merits such as low cost, high stability, and maximum atom utilization. Herein, a colorimetric strategy based on Fe-N-C single-atom nanozymes (Fe/NC-SAs) was established for the detection of alkaline phosphatase (ALP) activity. The Fe/NC-SAs prepared by pyrolysis have excellent peroxidase-like activity and can oxidize 3,3',5,5'-tetramethylbenzidine (TMB) to a blue color product in the presence of hydrogen peroxide (H₂O₂). When ascorbic acid (AA) is added to the system, the blue color fades, and the absorbance has a linear relationship with the concentration of AA. Alkaline phosphatase (ALP) can catalyze the hydrolysis of ascorbic acid 2-phosphate (AAP) to produce AA. Thus, a strategy based on Fe/NC-SAs for the detection of ALP activity was established, which provided a linear range of 0.1-1.5 U L^-1 and a limit of detection as low as 0.05 U L^-1. Besides, Fe/NC-SAs showed high stability under harsh conditions. Moreover, an Fe/NC-SA-based assay was successfully validated using human serum samples for ALP determination with satisfactory results, and has broad prospects in the field of biosensing.

Introducing reticular chemistry into agrochemistry

For survival and quality of life, human society has sought more productive, precise, and sustainable agriculture. Agrochemistry, which solves farming issues in a chemical manner, is the core engine that drives the evolution of modern agriculture. To date, agrochemistry has utilized chemical technologies in the form of pesticides, fertilizers, veterinary drugs and various functional materials to meet fundamental demands from human society, while increasing the socio-ecological consequences due to inefficient use. Thus, more useful, precise, and designable scaffolding materials are required to support sustainable agrochemistry. Reticular chemistry, which weaves molecular units into frameworks, has been applied in many fields based on two cutting-edge porous framework materials, namely metal-organic frameworks (MOFs) and covalent-organic frameworks (COFs). With flexibility in composition, structure, and pore chemistry, MOFs and COFs have shown increasing functionalities associated with agrochemistry in the last decade, potentially introducing reticular chemistry as a highly accessible chemical toolbox into agrochemical technologies. In this critical review, we will demonstrate how reticular chemistry shapes the future of agrochemistry in the fields of farm sensing, agro-ecological preservation and reutilization, agrochemical formulations, smart indoor farming, agrobiotechnology, and beyond.

Optical nanosensors for biofilm detection in the food industry: principles, applications and challenges

Biofilms are the universal lifestyle of bacteria enclosed in extracellular polymeric substances (EPS) on the contact surfaces of food processing facilities. The EPS-encapsulated foodborne bacterial pathogens are the main food contaminant sources, posing a serious threat to human health. The microcrystalline, sophisticated and dynamic biofilms necessitate the development of conventional microscopic imaging and spectral technology. Nanosensors, which can transfer the biochemical information into optical signals, have recently emerged for biofilm optical detection with high sensitivity and high spatial resolution at nanoscale scopes. Therefore, the aim of this review is to clarify the main detection scope in biofilms and the detection principles of optical nanosensors arousing Raman enhancement, fluoresce conversion and color change. The difficulties and challenges of biofilm characterization including the secretion and variation of main biochemical components are first discussed, the details about the principles and application examples of bioassays targeting foodborne pathogens based on optical nanosensors are then summarized. Finally, the challenges and future trends in developing optical nanosensors are also highlighted. The current review indicates that optical nanosensors have taken the challenges of detecting biofilm in complex food samples, including the characterization of biofilm formation mechanism, identification of microbial metabolic activities, diagnosis of potential food pathogens and sanitation monitoring of food processing equipment. Numerous in-depth explorations and various trials have proven that the bioassays based on multifunctional optical nanosensors are promising to ensure and promote food safety and quality. However, there still remains a daunting challenge to structure reproducible, biocompatible and applicable nano-sensors for biofilm characterization, identification, and imaging.

A colorimetric immunoassay for determination of Escherichia coli O157:H7 based on oxidase-like activity of cobalt-based zeolitic imidazolate framework

Cobalt-based zeolitic imidazolate framework nanosheets (ZIF-67) with oxidase-like catalytic activities as an immunoprobe were employed to enhance the sensitivity of an immunoassay. ZIF-67 was synthesized via the solvothermal method using 2-methylimidazole and cobalt dichloride as substrates. A colorimetric immunoassay for Escherichia coli (E. coli) O157:H7 was designed. Preparation of the immunoprobe involved self-polymerized dopamine being applied for the surface modification of ZIF-67 nanosheets in order to bind to the antibody, which was used to identify E. coli O157:H7. ZIF-67 catalyze the oxidation of 3,3',5,5'-tetramethylbiphenyl (TMB) and produced a color change from colorless to blue. Upon reaction termination, the absorbance was measured at 450 nm. By combining ZIF-67@PDA catalyzed chromogenic reaction with antibody recognition and magnetic separation, the limit of determination is 12 CFU mL^-1 and the linear range is 30 to 3.0 × 10⁸ CFU mL^-1. The proposed colorimetric immunoassay was successfully utilized to detect E. coli O157:H7 of spiked food samples. Graphical abstract.

Conjugation of antibodies and aptamers on nanozymes for developing biosensors

Nanozymes are engineered nanomaterials with enzyme-like activities. Over the past decade, impressive progresses on nanozymes in biosensing have been made due to their unique advantages of high stability, low cost, and easy modification compared to natural enzymes. For many biosensors, it is critical to conjugate nanozymes to affinity ligands such as antibodies and aptamers. Since different nanomaterials have different surface properties, conjugation methods need to be compatible with these properties. In addition, the effect of biomolecules on nanozyme activity needs to be considered. In this review, we first categorized nanozyme-based biosensors into four parts, respectively describing noncovalent and covalent modifications with antibodies and aptamers. Meanwhile, recent advances in antibody and aptamer labeled nanozyme biosensors are summarized, and the methods of their conjugation are further illustrated. Finally, conclusions and future perspectives for the development and application of nanozyme bioconjugates are discussed.

Size-Dependent Modulation of Polydopamine Nanospheres on Smart Nanoprobes for Detection of Pathogenic Bacteria at Single-Cell Level and Imaging-Guided Photothermal Bactericidal Activity

Pathogenic bacterial fouling in agriculture and food-associated products poses mounting food safety concerns today. Efficient integration of precise tracking and on-demand bacterial killing to achieve the source control of pathogenic bacteria at the single-cell level is one of the most valuable antifouling methods for safeguarding food safety but remains unexplored. Here, we report an all-in-one design strategy as a proof of concept to establish a stimuli-responsive nanoprobe PDANSs-FAM-Apt for the detection of Staphylococcus aureus (S. aureus) at the single-cell level, which could be capable of guiding the on-demand photothermal killing of bacteria upon near-infrared (NIR) light irradiation. By examining the size-dependent modulation of the fluorescence resonance energy transfer efficiency to polydopamine nanospheres (PDANSs), PDANSs-FAM-Apt was finally assembled by 6-carboxyfluorescein-terminated S. aureus, binding the aptamer (FAM-Apt) and PDANSs at ∼258 nm through π-π stacking interactions. As a result, PDANSs-FAM-Apt exhibits a remarkable fluorescence enhancement (∼261-fold) to S. aureus with a satisfactory detection limit of 1.0 cfu/mL, allowing for assay at the single-cell level and thus ultralow background fluorescence imaging of S. aureus as well as its biofilms. Moreover, PDANSs-FAM-Apt shows a high photothermal bactericidal property upon NIR light irradiation, endowing it with the strong capacity to efficiently produce heat for destroying S. aureus and its biofilms with the guidance of imaging results. This work emphasizes the versatility of using the combination of stimuli-responsive fluorescence imaging dependent on the PDANS size modulation and NIR light-activated photothermal antibacterial activity to design stimuli-responsive nanoprobes with an improved precision for pathogenic bacteria monitoring and source controlling, which opens a promising antifouling avenue to eliminate bacteria and disrupt bacterial biofilms in agriculture and food-related industries.

Bifunctional antibody and copper-based metal-organic framework nanocomposites for colorimetric α-fetoprotein sensing

Cu²⁺ are found to greatly reduce the photoinduced oxidase activity of fluorescein and then inhibit the chromogenic reaction catalyzed by fluorescein. A simple colorimetric assay for Cu²⁺ is established. Based on this, bifunctional nanocomposites of α-fetoprotein (AFP) antibody (Ab) and copper-based metal-organic framework (Ab2@Cu-MOF) are synthesized by the simple self-assembly of AFP Ab2, Cu²⁺, and 4,4'-dipyridyl: the binding site of AFP Ab2 exposed on the surface of the nanocomposites can specifically recognize AFP antigen; Cu²⁺ in nanocomposites can inhibit the visible light-induced activity of fluorescein. The structure of Ab2@Cu-MOF disintegrate and Cu²⁺ is released in an acetate buffer solution. The higher the amount of AFP antigens, the more significant the inhibitory effect. Thus, the Ab2@Cu-MOF immunoassay for AFP determination is established using 3,3',5,5'-tetramethylbenzidine as chromogenic substrate with a detection limit of 35 pg.mL^-1. This simple, cheap, and sensitive method sheds substantial light on practical clinical diagnosis. Meanwhile, the mechanism of inhibition is revealed to facilitate the targeted selection of enzyme regulators. Graphical abstract Diagrammatic illustration of Cu²⁺ detection (part a) and Ab2@Cu-MOF immunoassay for sensing α-fetoprotein based on the synthesized Ab2@Cu-MOF nanocomposites (parts a and b).

Recent Progress in the Identification of Aptamers Against Bacterial Origins and Their Diagnostic Applications

Aptamers have gained an increasing role as the molecular recognition element (MRE) in diagnostic assay development, since their first conception thirty years ago. The process to screen for nucleic acid-based binding elements (aptamers) was first described in 1990 by the Gold Laboratory. In the last three decades, many aptamers have been identified for a wide array of targets. In particular, the number of reports on investigating single-stranded DNA (ssDNA) aptamer applications in biosensing and diagnostic platforms have increased significantly in recent years. This review article summarizes the recent (2015 to 2020) progress of ssDNA aptamer research on bacteria, proteins, and lipids of bacterial origins that have implications for human infections. The basic process of aptamer selection, the principles of aptamer-based biosensors, and future perspectives will also be discussed.

Ultrasonic Assisted Synthesis of Size-Controlled Cu-Metal-Organic Framework Decorated Graphene Oxide Composite: Sustainable Electrocatalyst for the Trace-Level Determination of Nitrite in Environmental Water Samples

Excess levels of nitrite ion in drinking water interact with amine functionalized compounds to form carcinogenic nitrosamines, which cause stomach cancer. Thus, it is indispensable to develop a simple protocol to detect nitrite. In this paper, a Cu-metal-organic framework (Cu-MOF) with graphene oxide (GO) composite was synthesized by ultrasonication followed by solvothermal method and then fabricated on a glassy carbon (GC) electrode for the sensitive and selective determination of nitrite contamination. The SEM image of the synthesized Cu-MOF showed colloidosome-like structure with an average size of 8 μm. Interestingly, the Cu-MOF-GO composite synthesized by ultrasonic irradiation followed by solvothermal process produce controlled size of 3 μm colloidosome-like structure. This was attributed to the formation of an exfoliated sheet-like structure of GO by ultrasonication in addition to the obvious influence of GO providing the oxygen functional groups as a nucleation node for size-controlled growth. On the other hand, the composite prepared without ultrasonication exhibited 6.6 μm size agglomerated colloidosome-like structures, indicating the crucial role of ultrasonication for the formation of size-controlled composites. XPS results confirmed the presence of Cu(II) in the as-synthesized Cu-MOF-GO based on the binding energies at 935.5 eV for Cu 2p_3/2 and 955.4 eV for Cu 2p_1/2. The electrochemical impedance studies in [Fe(CN)₆]^3-/4- redox couple at the composite fabricated electrode exhibited more facile electron transfer than that with Cu-MOF and GO modified electrodes, which helped to utilize Cu-MOF-GO for trace level determination of nitrite in environmental effluent samples. The Cu-MOF-GO fabricated electrode offered a superior sensitive platform for nitrite determination than the Cu-MOF and GO modified electrodes demonstrating oxidation at less positive potential with enhanced oxidation current. The present sensor detects nitrite in the concentration range of 1 × 10^-8 to 1 × 10^-4 M with the lowest limit of detection (LOD) of 1.47 nM (S/N = 3). Finally, the present Cu-MOF-GO electrode was successfully exploited for nitrite ion determination in lake and dye contaminated water samples.

16S rRNA-functionalized multi-HCR concatemers in a signal amplification nanostructure for visual detection of Salmonella

To prevent foodborne diseases and minimize their impacts, it is extremely important to develop a cost-effective and efficient bacterial detection assay for diagnostics, particularly in resource-poor settings. In this study, 16S rRNA from foodborne Salmonella was coupled with multiple HCR (hybridization chain reaction) concatemers and functionalized in a signal structure for lateral flow nucleic acid biosensor (LFNAB) detection. The 16S rRNA was incubated with two specific capture probes and multiple helper probes carrying the same initiator, to unwind its secondary structure and form an "initiators-on-a-string" complex. Through use of the initiators, each target 16S rRNA yielded multiple HCR concatemers tethered to numerous biotins, and numerous streptavidin-labeled gold nanoparticles were introduced on the LFNAB. The limit of detection was 53.65 CFU/mL for Salmonella. Notably, this method has high specificity and applicability for the detection of Salmonella in food and water samples.

Recent Progress of Nanozymes in the Detection of Pathogenic Microorganisms

Infectious diseases are among the world's principal health problems. It is crucial to develop rapid, accurate and cost-effective methods for the detection of pathogenic microorganisms. Recently, considerable progress has been achieved in the field of inorganic enzyme mimics (nanozymes). Compared with natural enzymes, nanozymes have higher stability and lower cost. More interestingly, their properties can be designed for various demands. Herein, we introduce the latest research progress on the detection of pathogenic microorganisms by using various nanozymes. We also discuss the current challenges of nanozymes in biosensing and provide some strategies to overcome these barriers.

Highly sensitive detection of multiple antibiotics based on DNA tetrahedron nanostructure-functionalized magnetic beads

Functional DNAs-functionalized magnetic beads (MBs) offer great potential in bioanalysis field because of their target recognition and magnetic separation functions. However, the recognition capability and hybridization affinity of DNA probes often suffer from limited available space, poor probe conformation and non-selective adsorption. To overcome these limitations, we herein used aptamer-pendant DNA tetrahedron nanostructure-functionalized MBs (TETapt-tet MBs) to develop a target-response fluorescence method with tetracycline (TET) as a model. In the absence of TET, 6-carboxy-X-rhodamine-labeled complementary DNAs (ROX-cDNAs) were assembled on the surface of MBs. Upon the addition of target TET, the ROX-cDNAs were separated and released from the MBs to generate fluorescence signal. The limit of detection and limit of quantification for TET were found to be 6 pg mL^-1 and 20 pg mL^-1, respectively. Compared with ssDNA-functionalized MBs surface, the designed DNA tetrahedron nanostructure-based surface could decrease the hybridization time and reduce false positives, ensuring the accuracy of TET detection in complex samples. The presented method was successfully employed for TET detection in honey samples. Moreover, this functionalization strategy could be extended to detect multiple antibiotics by simply substituting different aptamer sequences. Therefore, the proposed method has great potential in the field of food safety and public health.

Three-dimensional macroporous gold electrodes superior to conventional gold disk electrodes in the construction of an electrochemical immunobiosensor for Staphylococcus aureus detection

Herein, a three-dimensional macroporous gold (3DMG) electrode is demonstrated to be a better choice than a conventional gold disk electrode in the construction of an electrochemical immunobiosensor for Staphylococcus aureus (S. aureus) detection. The 3DMG electrode was prepared on a gold disk electrode by one-step electrodeposition using hydrogen bubbles as dynamic templates. The 3DMG electrode has a high electrochemically active surface area with pore sizes ranging from 20 to 50 μm, and these unique features are conducive to the immobilization of primary antibodies and the capture of S. aureus. Secondary antibodies (Ab2) and alkaline phosphatase (ALP) were immobilized on mesoporous silica nanospheres (MSNs), and the resulting ALP-MSNs-Ab2 composites were utilized as signal tags to construct a sandwich-type electrochemical immunobiosensor. S. aureus was measured based on alkaline phosphatase-catalyzed silver deposition and differential pulse voltammetric detection. The linear range is from 5 to 109 CFU mL-1, and the detection limit is 2 CFU mL-1 for S. aureus detection. Due to the signal amplification of the 3DMG electrode, the sensitivity of the immunobiosensor constructed on the 3DMG electrode is 9 times that of an immunobiosensor constructed on a gold disc electrode. The proposed biosensor was successfully applied for detecting S. aureus in milk samples.

Stochastic DNA Dual-Walkers for Ultrafast Colorimetric Bacteria Detection

Rapid, sensitive, and reliable pathogen detection is growing in importance in human health and safety. In this work, we report a stochastic DNA dual-walker-based colorimetric biosensor for bacterial detection. In the presence of target bacteria, two kinds of released multiple walking strands are allowed for continuous walking on the Au nanoparticle (AuNP)-based 3D track, resulting in destabilized aggregation of AuNP-based probes. The induced color change from red to blue can serve as an analytical signal for colorimetric detection of target bacteria. We demonstrated that this mothed enables sensitive and specific bacterial detection within 15 min due to its ultrafast reaction kinetics and sensitive color change, showing a linear response ranging from 10⁰ to 10⁵ CFU/mL with a limit of detection of 1 CFU/mL. Moreover, we also realized analysis of practical samples using this colorimetric biosensor. Given its features of rapid, sensitive, specific, and reliable analysis, our stochastic dual-walker-based colorimetric biosensor shows much promise in point-of-care testing for bacteria detection.

Bacterial Detection and Elimination Using a Dual-Functional Porphyrin-Based Porous Organic Polymer with Peroxidase-Like and High Near-Infrared-Light-Enhanced Antibacterial Activity

The efficient fabrication of multifunctional nanoplatforms for bacterial detection and elimination is of great importance in nanobiotechnology. A new porphyrin-based porous organic polymer, FePPOP_BFPB, was synthesized via the reaction between pyrrole and 4-{2,2-bis[(4-formylphenoxy)methyl]-3-(4-formylphenoxy) propoxy} benzaldehyde (BFPB). The C-centric tetrahedral structure of BFPB promoted the formation of FePPOP_BFPB with a 3D interconnected porous structure, high specific surface area, and plentiful surface catalytic active sites. The adjustable structural alkyl chain also enhanced the absorption capability of FePPOP_BFPB in the long-wavelength visible and near-infrared regions (NIR). FePPOP_BFPB exhibited excellent peroxidase-like activity toward a representative peroxidase substrate, 3,3',5,5'-tetramethylbenzidine (TMB) with H₂O₂. Utilizing these features, a rapid and visual detection of Staphylococcus aureus (S. aureus) based on FePPOP_BFPB was established and exhibited high sensitivity and stability. Combining the catalysis with near-infrared-light (NIR) absorption, FePPOP_BFPB can effectively catalyze the decomposition of biologically relevant concentrations of H₂O₂ to produce vast amounts of •OH radicals via the photo-Fenton reaction, which avoids the utilization of high toxic concentrations of H₂O₂. On the basis of these satisfactory features, FePPOP_BFPB had a conspicuous bactericidal performance against S. aureus under NIR irradiation. To our knowledge, this is the first example of a porphyrin-based porous organic polymer antibacterial agent. The main reactive oxygen species (ROS) produced in this system and the possible antibacterial mechanism of FePPOP_BFPB was also proposed through a series of experiments.

Two zinc metal-organic framework isomers based on pyrazine tetracarboxylic acid and dipyridinylbenzene for adsorption and separation of CO2 and light hydrocarbons

Two highly porous metal-organic framework isomers Zn₂(TCPP)(DPB) (1 and 2, H₄TCPP = 2,3,5,6-tetrakis(4-carboxyphenyl)pyrazine and DPB = 1,4-di(pyridin-4-yl)benzene) were successfully synthesized using different solvents and acid species to adjust the topologies of these two MOFs. Both of them were constructed by paddlewheel Zn₂(COO)₄, TCPP^4-, and DPB ligands. In compound 1, the Zn₂(COO)₄ paddlewheel units were fitted together by the TCPP^4- ligands to form two-dimensional layers, which were further connected by DPB ligands as pillars to construct a two-fold catenated 3D framework. In compound 2, the cross-linkage of Zn₂(COO)₄ paddlewheel units and TCPP^4- ligands resulted in a three-dimensional framework of Zn-TCPP, in which DPB ligands coordinated to two axial vertical dinuclear Zn₂(COO)₄. Both activated MOFs exhibited permanent porosity with high BET areas (1324 m² g^-1 for 1 and 1247 m² g^-1 for 2) and possessed narrow pore size distributions (0.93 nm for 1 and 1.02 nm for 2). Moreover, the adsorption behaviors of the two activated MOFs for CO₂ and light hydrocarbons (C1, C2, and C3) at low pressure were evaluated and favorable selectivity was proven for C₃H₈/C₃H₆ over CH₄. These two MOF materials reported in this study for selective CO₂ and light hydrocarbon capture have immense potential applications for environmental protection.

Cobalt-based metal organic frameworks: a highly active oxidase-mimicking nanozyme for fluorescence “turn-on” assays of biothiol

With Co-MOFs as an oxidase-mimicking nanozyme, the AR oxidized product, non-fluorescent resazurin could be reduced to fluorescent resorufin by l-cysteine, which is specifically applied for fluorescence “turn-on” detection of l-cysteine.

One-step cascade detection of glucose at neutral pH based on oxidase-integrated copper(ii) metal–organic framework composites

An integrated system was fabricated from a copper(ii) metal–organic framework (Cu-MOF) and glucose oxidase (GOx) for one-step cascade determination of glucose at neutral pH (pH = 7.0).

Metal–organic framework based nanozymes: promising materials for biochemical analysis

Metal–organic frameworks with enzyme-like catalytic features (MOF nanozymes) exhibit great promise in detecting various analytes with amplified signal outputs.

Colorimetric assay for the sensitive detection of phosphate in water based on metal–organic framework nanospheres possessing catalytic activity

For the first time, the inhibition of the catalytic activity of Cu-MOF caused by phosphate was used for phosphate detection.

Amino-functionalized copper-based metal–organic frameworks for highly selective and sensitive detection of hypochlorite

In this work, we have developed amino-functionalized copper-based metal–organic frameworks (NH₂-Cu-MOFs) for the detection of hypochlorite (ClO⁻).

Sensitive photoelectrochemical immunoassay of Staphylococcus aureus based on one-pot electrodeposited ZnS/CdS heterojunction nanoparticles

We report here a facile synthesis of ZnS/CdS heterojunction nanoparticles on an indium-tin oxide (ITO) electrode and their application in the ultrasensitive photoelectrochemical detection of Staphylococcus aureus (S. aureus). The ZnS/CdS/ITO electrode was prepared using one-pot electrodeposition in an acidic solution containing ZnCl2, CdCl2 and Na2S2O3. The optimal ZnS/CdS heterojunction nanoparticles with a Zn/Cd atomic ratio of 1 : 1 showed a high photoelectrochemical response to l-cysteine. l-Cysteine-encapsulated liposome (cysteine@liposome) immunonanocapsules were prepared and used as the labels for photoelectrochemical detection of S. aureus. By coupling cysteine@liposome immunonanocapsule labeling with immunomagnetic separation/enrichment and photoelectrochemical analysis using the ZnS/CdS/ITO electrode, sensitive photoelectrochemical detection of S. aureus was achieved. Under optimal conditions, the linear range for photoelectrochemical detection of S. aureus was from 1 to 4000 CFU mL-1. The proposed method was successfully used for photoelectrochemical detection of S. aureus in milk and juice samples.

Peroxidase-like Activity of Metal-Organic Framework [Cu(PDA)(DMF)] and Its Application for Colorimetric Detection of Dopamine

A metal-organic framework (MOF) [Cu(PDA)(DMF)] was synthesized under mild mixed solvothermal conditions. It is constructed by 1,10-phenanthroline-2,9-dicarboxylic acid (H₂PDA) and Cu²⁺ ions. The complex exhibits high peroxidase-like activity and can catalytically oxidize the colorless substrate 3,3',5,5'-tetramethylbenzidine to a blue product in the presence of H₂O₂. However, the peroxidase-like activity of [Cu(PDA)(DMF)] can be potently inhibited in the presence of dopamine. Based on this phenomenon, the colorimetric detection of dopamine was demonstrated with good selectivity and high sensitivity. [Cu(PDA)(DMF)] showed good stability and robust catalytic activity, which has been employed in the detection of dopamine in human urine and pharmaceutical samples.