Monolayer Nanosheets Exfoliated from Cage-Based Cationic Metal-Organic Frameworks

The rational design and preparation of monolayer metal-organic framework (MOF) nanosheets remain great challenges. Recently, we found that monolayer MOF nanosheets can be facially exfoliated on a large scale from pristine two-dimensional (2D) MOFs with substantially reduced interlaminar interaction. By employing cage-like bicyclocalix[2]arene[2]triazine tri-imidazole as the building block, a family of cationic two-dimensional metal-organic frameworks (2D MOFs) with steric layer were designed and prepared. The single crystal structures have clearly identified that only very weak and sparse distributed C-H···π interaction exists between adjacent layers.On the basis of density functional theory calculation, the interlayer interaction of these cage-based cationic 2D MOFs was estimated to be 1/46th of that of graphite. Due to the extremely weak interaction, these cationic 2D MOFs tend to degenerate into an "amorphous" state after being soaked in other solvents; they can be readily exfoliated into 1.1 nm thick monolayer nanosheets with a high degree of thickness homogeneity, large lateral size, and significantly enlarged surface area. This work has identified that a cage-like molecule is the ideal building block for 2D cationic MOFs and ultrathin nanosheets; It was futher confirmed that weakening the interlaminar interaction is an effective strategy for facilely producing monolayer nanosheets.

Advances in Metal-organic Frameworks (MOFs) based Biosensors for Diagnosis: An Update

Metal-organic frameworks (MOFs) have significant advantages over other candidate classes of chemo-sensory materials owing to their extraordinary structural tunability and characteristics. MOF-based biosensing is a simple and convenient method for identifying various species. Biomarkers are molecular or cellular processes that link environmental exposure to a health outcome. Biomarkers are important in understanding the links between environmental chemical exposure and the development of chronic diseases, as well as in identifying disease-prone subgroups. Until now, several species, including nanoparticles (NPs) and their nanocomposites, small molecules, and unique complex systems, have been used for the chemical sensing of biomarkers. Following the overview of the field, we discussed the various fabrication methods for MOFs development in this review. We provide a thorough overview of the previous five years of progress to broaden the scope of analytes for future research. Several enzymatic and non-enzymatic sensors are offered, together with a mandatory measuring method that includes detection range and dynamic range. In addition, we reviewed the comparison of enzymatic and non-enzymatic biosensors, inventive edges, and the difficulties that need to be solved. This work might open up new possibilities for material production, sensor development, medical diagnostics, and other sensing fields.

Recent trends in covalent functionalization of 2D materials

Covalent functionalization of the surface is more crucial in 2D materials than in conventional bulk materials because of their atomic thinness, large surface-to-volume ratio, and uniform surface chemical potential. Because...

Facile Surface Functionalization of MXene by Pillar[5]arene for Enhanced Electrochemical Performance

A simple strategy was used to prepare functional two-dimensional materials via combination of pillar[5]arene (P5) and MXene. Electrochemical results of MXene-P5 exhibits high supramolecular recognition, enrichment capability, and high electrochemical...

Recent Advances in Fluorinated Graphene from Synthesis to Applications: Critical Review on Functional Chemistry and Structure Engineering

Fluorinated graphene (FG), as an emerging member of the graphene derivatives family, has attracted wide attention on account of its excellent performances and underlying applications. The introduction of a fluorine atom, with the strongest electronegativity (3.98), greatly changes the electron distribution of graphene, resulting in a series of unique variations in optical, electronic, magnetic, interfacial properties and so on. Herein, recent advances in the study of FG from synthesis to applications are introduced, and the relationship between its structure and properties is summarized in detail. Especially, the functional chemistry of FG has been thoroughly analyzed in recent years, which has opened a universal route for the functionalization and even multifunctionalization of FG toward various graphene derivatives, which further broadens its applications. Moreover, from a particular angle, the structure engineering of FG such as the distribution pattern of fluorine atoms and the regulation of interlayer structure when advanced nanotechnology gets involved is summarized. Notably, the elaborated structure engineering of FG is the key factor to optimize the corresponding properties for potential applications, and is also an up-to-date research hotspot and future development direction. Finally, perspectives and prospects for the problems and challenges in the study of FG are put forward.

Ink Formulation and Printing Parameters for Inkjet Printing of Two Dimensional Materials: A Mini Review

Inkjet printing of two-dimensional (2D) material has been a center of interest for wearable electronics and has become a promising platform for next-generation technologies. Despite the enormous progress made in printed 2D materials, there are still challenges in finding the optimal printing conditions involving the ink formulation and printing parameters. Adequate ink formulation and printing parameters for target 2D materials rely on empirical studies and repeated trials. Therefore, it is essential to compile promising strategies for ink formulation and printing parameters. In this context, this review discusses the optimal ink formulations to prepare stable ink and steady ink jetting and then explores the critical printing parameters for fabricating printed 2D materials of a high quality. The summary and future prospects for inkjet-printed 2D materials are also addressed.

2D material based field effect transistors and nanoelectromechanical systems for sensing applications

Sensors are ubiquitous in modern society because of their wide applications in healthcare, security, forensic industries as well as environmental protection. Specifically, sensors which can be microfabricated employing very-large-scale-integration (VLSI) compatible microfabrication techniques are particularly desirable. This is because they can provide several advantages: small size, low cost, and possibility of mass fabrication. 2D materials are a promising building block for such sensors. Their atomically thin nature, flat surfaces and ability to form van der Waals hetero junctions opens up the pathway for versatile functionalities. Here, we review 2D material-based field-effect-transistors (FETs) and nano-electro-mechanical systems (NEMs) for applications in detecting different gases, chemicals, and biomolecules. We will provide insights into the unique advantages of these materials for these sensing applications and discuss the fabrication methods, detection schemes and performance pertaining to these technologies. Finally, we will discuss the current challenges and prospects for this field.

A Critical Review on Black Phosphorus-Based Photocatalytic CO2 Reduction Application

Energy shortages and greenhouse effects are two unavoidable problems that need to be solved. Photocatalytically converting CO₂ into a series of valuable chemicals is considered to be an effective means of solving the above dilemmas. Among these photocatalysts, the utilization of black phosphorus for CO₂ photocatalytic reduction deserves a lightspot not only for its excellent catalytic activity through different reaction routes, but also on account of the great preponderance of this relatively cheap catalyst. Herein, this review offers a summary of the recent advances in synthesis, structure, properties, and application for CO₂ photocatalytic reduction. In detail, the review starts from the basic principle of CO₂ photocatalytic reduction. In the following section, the synthesis, structure, and properties, as well as CO₂ photocatalytic reduction process of black phosphorus-based photocatalyst are discussed. In addition, some possible influencing factors and reaction mechanism are also summarized. Finally, a summary and the possible future perspectives of black phosphorus-based photocatalyst for CO₂ reduction are established.

Two-Dimensional Polymers and Polymerizations

Synthetic chemists have developed robust methods to synthesize discrete molecules, linear and branched polymers, and disordered cross-linked networks. However, two-dimensional polymers (2DPs) prepared from designed monomers have been long missing from these capabilities, both as objects of chemical synthesis and in nature. Recently, new polymerization strategies and characterization methods have enabled the unambiguous realization of covalently linked macromolecular sheets. Here we review 2DPs and 2D polymerization methods. Three predominant 2D polymerization strategies have emerged to date, which produce 2DPs either as monolayers or multilayer assemblies. We discuss the fundamental understanding and scope of each of these approaches, including: the bond-forming reactions used, the synthetic diversity of 2DPs prepared, their multilayer stacking behaviors, nanoscale and mesoscale structures, and macroscale morphologies. Additionally, we describe the analytical tools currently available to characterize 2DPs in their various isolated forms. Finally, we review emergent 2DP properties and the potential applications of planar macromolecules. Throughout, we highlight achievements in 2D polymerization and identify opportunities for continued study.

Inclusion of organic species in exfoliated montmorillonite nanolayers towards hierarchical functional inorganic-organic nanostructures

Montmorillonite (Mt) can readily undergo spontaneous delamination or exfoliation into nanolayers by various physical and chemical processes, which allow various strategies to engineer hierarchical functional inorganic-organic nanostructures. This review aims to discuss the recent progress in the liquid-phase exfoliation of Mt into individual nanolayers and the inclusion chemistry of functional organic species, ions, or molecules into the exfoliated Mt nanolayers to produce hierarchical functional inorganic-organic nanostructures. The exfoliation methods include mechanical force, ultrasonication, and intercalation-assisted exfoliation. Techniques for quickly assessing the quality of the exfoliated Mt nanolayers are still needed. Layer-by-layer (LbL) deposition, template, and evaporation-induced inclusions are examined to fabricate hierarchical Mt-organic species nanocomposites with unique functionalities and properties. The nanocomposites can be produced as multilayered porous films, brick-and-mortar coatings, hydrogels with a house-of-cards structure, core-shell materials, and hollow and mesoporous spherical nanocomposites, which exhibit significant potential for adsorption, catalysis, targeted delivery and controlled drug release, highly sensitive sensors, flame retardant coatings, and thermal energy storage and release (i.e. phase change materials). Finally, the challenges and prospects for the future development of hierarchical nanocomposites of exfoliated Mt nanolayers and organic species, particularly in hierarchical supramolecular nanostructured composites, are highlighted.

Recent trends in the applications of thermally expanded graphite for energy storage and sensors - a review

Carbon nanomaterials such as carbon dots (0D), carbon nanotubes (1D), graphene (2D), and graphite (3D) have been exploited as electrode materials for various applications because of their high active surface area, thermal conductivity, high chemical stability and easy availability. In addition, due to the strong affinity between carbon nanomaterials and various catalysts, they can easily form metal carbides (examples: ionic, covalent, interstitial and intermediate transition metal carbides) and also help in the stable dispersion of catalysts on the surface of carbon nanomaterials. Thermally expanded graphite (TEG) is a vermicular-structured carbon material that can be prepared by heating expandable graphite up to 1150 °C using a muffle or tubular furnace. At high temperatures, the thermal expansion of graphite occurred by the intercalation of ions (examples: SO4 2-, NO3 -, Li+, Na+, K+, etc.) and oxidizing agents (examples: ammonium persulfate, H2O2, potassium nitrate, potassium dichromate, potassium permanganate, etc.) which helped in the exfoliation process. Finally, the obtained TEG, an intumescent form of graphite, has been used in the preparation of composite materials with various conducting polymers (examples: epoxy, poly(styrene-co-acrylonitrile), polyaniline, etc.) and metal chlorides (examples: FeCl3, CuCl2, and ZnCl2) for hydrogen storage, thermal energy storage, fuel cells, batteries, supercapacitors, sensors, etc. The main features of TEG include a highly porous structure, very lightweight with an apparent density (0.002-0.02 g cm-3), high mechanical properties (10 MPa), thermal conductivity (25-470 W m-1 K-1), high electrical conductivity (106-108 S cm-1) and low-cost. The porosity and expansion ratio of graphite layers could be customized by controlling the temperature and selection of intercalation ions according to the demand. Recently, TEG based composites prepared with metal oxides, chlorides and polymers have been demonstrated for their use in energy production, energy storage, and electrochemical (bio-) sensors (examples: urea, organic pollutants, Cd2+, Pb2+, etc.). In this review, we have highlighted and summarized the recent developments in TEG-based composites and their potential applications in energy storage, fuel cells and sensors with hand-picked examples.

Solution-processed two-dimensional materials for next-generation photovoltaics

In the ever-increasing energy demand scenario, the development of novel photovoltaic (PV) technologies is considered to be one of the key solutions to fulfil the energy request. In this context, graphene and related two-dimensional (2D) materials (GRMs), including nonlayered 2D materials and 2D perovskites, as well as their hybrid systems, are emerging as promising candidates to drive innovation in PV technologies. The mechanical, thermal, and optoelectronic properties of GRMs can be exploited in different active components of solar cells to design next-generation devices. These components include front (transparent) and back conductive electrodes, charge transporting layers, and interconnecting/recombination layers, as well as photoactive layers. The production and processing of GRMs in the liquid phase, coupled with the ability to "on-demand" tune their optoelectronic properties exploiting wet-chemical functionalization, enable their effective integration in advanced PV devices through scalable, reliable, and inexpensive printing/coating processes. Herein, we review the progresses in the use of solution-processed 2D materials in organic solar cells, dye-sensitized solar cells, perovskite solar cells, quantum dot solar cells, and organic-inorganic hybrid solar cells, as well as in tandem systems. We first provide a brief introduction on the properties of 2D materials and their production methods by solution-processing routes. Then, we discuss the functionality of 2D materials for electrodes, photoactive layer components/additives, charge transporting layers, and interconnecting layers through figures of merit, which allow the performance of solar cells to be determined and compared with the state-of-the-art values. We finally outline the roadmap for the further exploitation of solution-processed 2D materials to boost the performance of PV devices.

2D materials for bone therapy

Due to their prominent physicochemical properties, 2D materials are broadly applied in biomedicine. Currently, 2D materials have achieved great success in treating many diseases such as cancer and tissue engineering as well as bone therapy. Based on their different characteristics, 2D materials could function in various ways in different bone diseases. Herein, the application of 2D materials in bone tissue engineering, joint lubrication, infection of orthopedic implants, bone tumors, and osteoarthritis are firstly reviewed comprehensively together. Meanwhile, different mechanisms by which 2D materials function in each disease reviewed below are also reviewed in detail, which in turn reveals the versatile functions and application of 2D materials. At last, the outlook on how to further broaden applications of 2D materials in bone therapies based on their excellent properties is also discussed.

Mechanism, Material, Design, and Implementation Principle of Two-Dimensional Material Photodetectors

Two-dimensional (2D) materials may play an important role in future photodetectors due to their natural atom-thin body thickness, unique quantum confinement, and excellent electronic and photoelectric properties. Semimetallic graphene, semiconductor black phosphorus, and transition metal dichalcogenides possess flexible and adjustable bandgaps, which correspond to a wide interaction spectrum ranging from ultraviolet to terahertz. Nevertheless, their absorbance is relatively low, and it is difficult for a single material to cover a wide spectrum. Therefore, the combination of phototransistors based on 2D hybrid structures with other material platforms, such as quantum dots, organic materials, or plasma nanostructures, exhibit ultra-sensitive and broadband optical detection capabilities that cannot be ascribed to the individual constituents of the assembly. This article provides a comprehensive and systematic review of the recent research progress of 2D material photodetectors. First, the fundamental detection mechanism and key metrics of the 2D material photodetectors are introduced. Then, the latest developments in 2D material photodetectors are reviewed based on the strategies of photocurrent enhancement. Finally, a design and implementation principle for high-performance 2D material photodetectors is provided, together with the current challenges and future outlooks.

Serosa-Mimetic Nanoarchitecture Membranes for Highly Efficient Osmotic Energy Generation

Osmotic energy stored between seawater and freshwater is a clean and renewable energy source. However, developing high-efficiency and durable permselective membranes for harvesting osmotic energy remains a longstanding bottleneck. Herein, we report that a nanocomposite membrane with a biological serosa-mimetic structure can achieve high-performance osmotic energy generation through the coupling of two-dimensional (2D) sulfonated covalent organic framework (COF) nanosheets and anion-grafted aramid nanofibers (ANFs). As verified by theoretical calculations and experimental investigations, the 2D COF nanosheets not only provide abundant one-dimensional (1D)/2D nanofluidic channels to synergistically benefit an ultrafast ion migration but also enable high cation permselectivity via the covalently tethered anions. The grafted ANFs increase the mechanical strength of the membrane and further improve the ion diffusion/rectification. When it was applied in an osmotic power generator, the biomimetic membrane delivered a power density of 9.6 W m^-2, far surpassing the commercial benchmark of 5.0 W m^-2. This work could boost the viability of osmotic energy conversion toward a sustainable future.

Polymer Interface-Dependent Morphological Transition toward Two-Dimensional Porous Inorganic Nanocoins as an Ultrathin Multifunctional Layer for Stable Lithium-Sulfur Batteries

Two-dimensional (2D) porous inorganic nanomaterials have intriguing properties as a result of dimensional features and high porosity, but controlled production of circular 2D shapes is still challenging. Here, we designed a simple approach to produce 2D porous inorganic nanocoins (NCs) by integrating block copolymer (BCP) self-assembly and orientation control of microdomains at polymer-polymer interfaces. Multicomponent blends containing BCP and homopoly(methyl methacrylate) (hPMMA) are designed to undergo macrophase separation followed by microphase separation. The balanced interfacial compatibility of BCP allows perpendicularly oriented lamellar-assembly at the interfaces between BCP-rich phase and hPMMA matrix. Disassembly of lamellar structures and calcination yield ultrathin 2D inorganic NCs that are perforated by micropores. This approach enables control of the thickness, size, and chemical composition of the NCs. 2D porous and acidic aluminosilicate NC (AS-NC) is used to fabricate an ultrathin and lightweight functional separator for lithium-sulfur batteries. The AS-NC layer acts as an ionic sieve to selectively block lithium polysulfides. Abundant acid sites chemically capture polysulfides, and micropores physically exclude them, so sulfur utilization and cycle stability are increased.

Methods of hexagonal boron nitride exfoliation and its functionalization: covalent and non-covalent approaches

The exfoliation of two-dimensional (2D) hexagonal boron nitride nanosheets (h-BNNSs) from bulk hexagonal boron nitride (h-BN) materials has received intense interest owing to their fascinating physical, chemical, and biological properties. Numerous exfoliation techniques offer scalable approaches for harvesting single-layer or few-layer h-BNNSs. Their structure is very comparable to graphite, and they have numerous significant applications owing to their superb thermal, electrical, optical, and mechanical performance. Exfoliation from bulk stacked h-BN is the most cost-effective way to obtain large quantities of few layer h-BN. Herein, numerous methods have been discussed to achieve the exfoliation of h-BN, each with advantages and disadvantages. Herein, we describe the existing exfoliation methods used to fabricate single-layer materials. Besides exfoliation methods, various functionalization methods, such as covalent, non-covalent, and Lewis acid-base approaches, including physical and chemical methods, are extensively described for the preparation of several h-BNNS derivatives. Moreover, the unique and potent characteristics of functionalized h-BNNSs, like enhanced solubility in water, improved thermal conductivity, stability, and excellent biocompatibility, lead to certain extensive applications in the areas of biomedical science, electronics, novel polymeric composites, and UV photodetectors, and these are also highlighted.

Recent progress in the synthesis of novel two-dimensional van der Waals materials

The last decade has witnessed the significant progress of physical fundamental research and great success of practical application in two-dimensional (2D) van der Waals (vdW) materials since the discovery of graphene in 2004. To date, vdW materials is still a vibrant and fast-expanding field, where tremendous reports have been published covering topics from cutting-edge quantum technology to urgent green energy, and so on. Here, we briefly review the emerging hot physical topics and intriguing materials, such as 2D topological materials, piezoelectric materials, ferroelectric materials, magnetic materials and twistronic heterostructures. Then, various vdW material synthetic strategies are discussed in detail, concerning the growth mechanisms, preparation conditions and typical examples. Finally, prospects and further opportunities in the booming field of 2D materials are addressed.

An Organic Solvent-Assisted Intercalation and Collection (OAIC) for Ti3C2Tx MXene with Controllable Sizes and Improved Yield

A good method of synthesizing Ti₃C₂T_x (MXene) is critical for ensuring its success in practical applications, e.g., electromagnetic interference shielding, electrochemical energy storage, catalysis, sensors, and biomedicine. The main concerns focus on the moderation of the approach, yield, and product quality. Herein, a modified approach, organic solvent-assisted intercalation and collection, was developed to prepare Ti₃C₂T_x flakes. The new approach simultaneously solves all the concerns, featuring a low requirement for facility (centrifugation speed < 4000 rpm in whole process), gram-level preparation with remarkable yield (46.3%), a good electrical conductivity (8672 S cm^-1), an outstanding capacitive performance (352 F g^-1), and easy control over the dimension of Ti₃C₂T_x flakes (0.47-4.60 μm²). This approach not only gives a superb example for the synthesis of other MXene materials in laboratory, but sheds new light for the future mass production of Ti₃C₂T_x MXene.

A decade of exploring MXenes as aquatic cleaners: Covering a broad range of contaminants, current challenges and future trends

Clean water, the elixir of life, is of tremendous importance in achieving environmental sustainability and the balanced functioning of our ecosystem. Coupled with population growth, several anthropogenic activities and environmental catastrophes have together contributed to an alarming increase in the concentration of toxic pollutants in water bodies. Diversified physiochemical conditions of water matrices, ranging from mining drainage to seawater, is the critical challenge in designing adsorbents. MXenes, a new class of 2D layered materials, are transition metal nitrides, carbides, carbonitrides or borides formed through selective etching process. MXenes are known to have high surface area and activity with biological compatibility and chemical stability and therefore are promising adsorbents and have been explored for a broad range of contaminants. This review starts with a brief about environmental contaminants followed by synthesis and modifications of MXenes. It then revolves around their so far explored adsorbing and degradation properties for different contaminants ranging from toxic metals, inorganic ions, and radionuclides to various organic pollutants, including dyes, pharmaceuticals, aromatic hydrocarbons, and pesticides, etc. Finally, we have discussed associated toxicity, secondary contamination, future trends, and challenges in ascertaining scalability and wide-range applicability of MXenes in natural environmental conditions to make them a warrior of water sustainability.

LixNa2-xW4O13 nanosheet for scalable electrochromic device

The printed electronics technology can be used to efficiently construct smart devices and is dependent on functional inks containing well-dispersed active materials. Two-dimensional (2D) materials are promising functional ink candidates due to their superior properties. However, the majority 2D materials can disperse well only in organic solvents or in surfactant-assisted water solutions, which limits their applications. Herein, we report a lithium (Li)-ion exchange method to improve the dispersity of the Na₂W₄O₁₃ nanosheets in pure water. The Li-ion-exchanged Na₂W₄O₁₃ (Li_xNa_2-xW₄O₁₃) nanosheets show highly stable dispersity in water with a zeta potential of -55 mV. Moreover, this aqueous ink can be sprayed on various substrates to obtain a uniform Li_xNa_2-xW₄O₁₃ nanosheet film, exhibiting an excellent electrochromic performance. A complementary electrochromic device containing a Li_xNa_2-xW₄O₁₃ nanosheet film as an electrochromic layer and Prussian white (PW) as an ion storage layer exhibits a large optical modulation of 75% at 700 nm, a fast switching response of less than 2 s, and outstanding cyclic stability. This Na₂W₄O₁₃-based aqueous ink exhibits considerable potential for fabricating large-scale and flexible electrochromic devices, which would meet the practical application requirements.

Direct formation of interlayer exciton in two-dimensional van der Waals heterostructures

In atomically thin two-dimensional van der Waals (2D vdW) heterostructures, spatially separated interlayer excitons play an important role in the optoelectronic performance and show great potential for the exploration of many-body quantum phenomena. A commonly accepted formation mode for interlayer excitons is via a two-step intralayer exciton transfer mechanism, namely, photo-excited intralayer excitons are initially generated in individual sublayers, and photogenerated electrons and holes are then separated into opposite sublayers based on the type-II band alignment. Herein, we expand the concept of interlayer exciton formation and reveal that bright interlayer excitons can be generated in one step by direct interlayer photoexcitation in 2D vdW heterostructures that have strong interlayer coupling and a short photoexcitation channel. First-principles and many-body perturbation theory calculations demonstrate that indium selenide/antimonene and indium selenide/black phosphorus heterostructures are two promising systems that show an exceptionally large interlayer transition probability (>500 Debye²). This study enriches the understanding of interlayer exciton formation and provides a new avenue to acquiring strong interlayer excitons in artificial 2D vdW heterostructures.

Influence of the choice of precursors on the synthesis of two-dimensional transition metal dichalcogenides

The interest in transition metal dichalcogenides (TMDCs; MEy/2; M = transition metal; E = chalcogenide, y = valence of the metal) has grown exponentially across various science and engineering disciplines due to their unique structural chemistry manifested in a two-dimensional lattice that results in extraordinary electronic and transport properties desired for applications in sensors, energy storage and optoelectronic devices. Since the properties of TMDCs can be tailored by changing the stacking sequence of 2D monolayers with similar or dis-similar materials, a number of synthetic routes essentially based on the disintegration of bulk (e.g., chemical exfoliation) or the integration of atomic constituents (e.g., vapor phase growth) have been explored. Despite a large body of data available on the chemical synthesis of TMDCs, experimental strategies with high repeatability of control over film thickness, phase and compositional purity remain elusive, which calls for innovative synthetic concepts offering, for instance, self-limited growth in the z-direction and homogeneous lateral topography. This review summarizes the recent conceptual advancements in the growth of layered van der Waals TMDCs from both mixtures of metal and chalcogen sources (multi-source precursors; MSPs) and from molecular compounds containing metals and chalcogens in one starting material (single-source precursor; SSPs). The critical evaluation of the strengths, limitations and opportunities of MSP and SSP approaches is provided as a guideline for the fabrication of TMDCs from commercial and customized molecular precursors. For example, alternative synthetic pathways using tailored molecular precursors circumvent the challenges of differential nucleation and crystal growth kinetics that are invariably associated with conventional gas phase chemical vapor transport (CVT) and chemical vapor deposition (CVD) of a mixture of components. The aspects of achieving high compositional purity and alternatives to minimize competing reactions or side products are discussed in the context of efficient chemical synthesis of TMDCs. Moreover, a critical analysis of the potential opportunities and existing bottlenecks in the synthesis of TMDCs and their intrinsic properties is provided.

Defect Engineering in Ultrathin SnSe Nanosheets for High-Performance Optoelectronic Applications

Ultrathin lamellar SnSe is highly attractive for applications in areas such as photonics, photodetectors, photovoltaic devices, and photocatalysis, owing to its suitable band gap, exceptional light absorption capabilities, and considerable carrier mobility. On the other hand, SnSe nanosheets (NSs) still face challenges of being difficult to prepare and their devices having low photoelectric conversion efficiencies. Herein, ultrathin SnSe NSs with controlled Se defects were synthesized with high yield by a facial Li intercalation-assisted liquid exfoliation method. The loss of Se, a narrowing of the band gap, and an increase in lattice disorders involving vacancies, distortions, and phase transition were observed in SnSe NSs prepared with a long lithiation process. Comparing between the 24 and 72 h lithiation samples, the ones processed for a longer time displayed a faster recombination time due to more defect-induced mid-states. Inspiringly, enhancements of 4-10 times were observed for photodetector device parameters such as photocurrent, photoresponsivity, photoresponse speed, and specific detectivity of the 72 h lithiation SnSe NSs. Additionally, these devices show good stability and a broad detection range, from ultraviolet to the near infrared region. Our results provide a promising avenue for the mass production of SnSe NSs with high photoelectric performance and open up opportunities for applications in photonics, optoelectronics, and photocatalysis.

Differences and Similarities of Photocatalysis and Electrocatalysis in Two-Dimensional Nanomaterials: Strategies, Traps, Applications and Challenges

Photocatalysis and electrocatalysis have been essential parts of electrochemical processes for over half a century. Recent progress in the controllable synthesis of 2D nanomaterials has exhibited enhanced catalytic performance compared to bulk materials. This has led to significant interest in the exploitation of 2D nanomaterials for catalysis. There have been a variety of excellent reviews on 2D nanomaterials for catalysis, but related issues of differences and similarities between photocatalysis and electrocatalysis in 2D nanomaterials are still vacant. Here, we provide a comprehensive overview on the differences and similarities of photocatalysis and electrocatalysis in the latest 2D nanomaterials. Strategies and traps for performance enhancement of 2D nanocatalysts are highlighted, which point out the differences and similarities of series issues for photocatalysis and electrocatalysis. In addition, 2D nanocatalysts and their catalytic applications are discussed. Finally, opportunities, challenges and development directions for 2D nanocatalysts are described. The intention of this review is to inspire and direct interest in this research realm for the creation of future 2D nanomaterials for photocatalysis and electrocatalysis.

Overcoming barriers in photodynamic therapy harnessing nano-formulation strategies

Photodynamic therapy (PDT) has been extensively investigated for decades for tumor treatment because of its non-invasiveness, spatiotemporal selectivity, lower side-effects, and immune activation ability. It can be a promising treatment modality in several medical fields, including oncology, immunology, urology, dermatology, ophthalmology, cardiology, pneumology, and dentistry. Nevertheless, the clinical application of PDT is largely restricted by the drawbacks of traditional photosensitizers, limited tissue penetrability of light, inefficient induction of tumor cell death, tumor resistance to the therapy, and the severe pain induced by the therapy. Recently, various photosensitizer formulations and therapy strategies have been developed to overcome these barriers. Significantly, the introduction of nanomaterials in PDT, as carriers or photosensitizers, may overcome the drawbacks of traditional photosensitizers. Based on this, nanocomposites excited by various light sources are applied in the PDT of deep-seated tumors. Modulation of cell death pathways with co-delivered reagents promotes PDT induced tumor cell death. Relief of tumor resistance to PDT with combined therapy strategies further promotes tumor inhibition. Also, the optimization of photosensitizer formulations and therapy procedures reduces pain in PDT. Here, a systematic summary of recent advances in the fabrication of photosensitizers and the design of therapy strategies to overcome barriers in PDT is presented. Several aspects important for the clinical application of PDT in cancer treatment are also discussed.

An ion-selective crown ether covalently grafted onto chemically exfoliated MoS2 as a biological fluid sensor

We describe the basal plane functionalization of chemically exfoliated molybdenum disulfide (ce-MoS2) nanosheets with a benzo-15-crown-5 ether (B15C5), promoted by the chemistry of diazonium salts en route to the fabrication and electrochemical assessment of an ion-responsive electrode. The success of the chemical modification of ce-MoS2 nanosheets was investigated by infrared and Raman spectroscopy, and the amount of the incorporated crown ether was estimated by thermogravimetric analysis. Raman spatial mapping at on-resonance excitation allowed us to disclose the structural characteristics of the functionalized B15C5-MoS2 nanosheets and the impact of basal plane functionalization to the stabilization of the 1T phase of ce-MoS2. Morphological investigation of the B15C5-MoS2 hybrid was implemented by atomic force microscopy and high-resolution transmission electron microscopy. Furthermore, fast-Fourier-transform analysis and in situ energy dispersive X-ray spectroscopy revealed the crystal lattice of the modified nanosheets and the presence of crown-ether addends, respectively. Finally, B15C5-MoS2 electrodes were constructed and evaluated as ion-selective electrodes for sodium ions in aqueous solution and an artificial sweat matrix.

Hydrodynamic synthesis of Fe2O3@MoS2 0D/2D-nanocomposite material and its application as a catalyst in the glycolysis of polyethylene terephthalate

We report a fast and simple synthesis of Fe₂O₃@MoS₂ 0D/2D-nanocomposite material using a Taylor–Couette flow reactor. A Taylor–Couette flow with high shear stress and mixing characteristics was used for fluid dynamic exfoliation of MoS₂ and deposition of uniform Fe₂O₃ nanoparticles, resulting in a Fe₂O₃@MoS₂ in the form of 0D/2D-nanocomposite material. Using Taylor–Couette flow reactor, we could synthesize Fe₂O₃@MoS₂ 0D/2D-nanocomposite material at a rate higher than 1000 mg h⁻¹ which is much higher than previously reported production rate of 0.2–116.7 mg h⁻¹. The synthesis of Fe₂O₃@MoS₂ nanocomposite was achieved in an aqueous solution without thermal or organic solvent treatment. Exfoliated MoS₂ nanosheets show an average thickness of 2.6 ± 2.3 nm (<6 layers) and a lateral size of 490 ± 494 nm. Fe₂O₃ nanoparticles have an average size of 7.4 ± 3.0 nm. Fe₂O₃ nanoparticles on chemically and thermally stable MoS₂ nanosheets show catalytic activity in the glycolysis of polyethylene terephthalate (PET). High conversion of PET (97%) and a high yield (90%) for bis(hydroxyethyl) terephthalate (BHET) were achieved in a reaction time of 3 h at the reaction temperature of 225 °C.

Fe₂O₃@MoS₂ 0D/2D-nanocomposite material was synthesized in an aqueous solution using a Taylor–Couette flow reactor.

Mechanism of monolayer to bilayer silicene transformation in CaSi2 due to fluorine diffusion

Calcium disilicide (CaSi2) possesses a layered structure composed of alternating monolayers of silicene (MLSi) and calcium. Here the mechanism by which fluorine (F) diffusion into CaSi2 leads to a phase transformation from MLSi to bilayer silicene (BLSi) was investigated. Disorder in intra-layer atomic arrangements and F aggregation were observed using HAADF-STEM in areas of low F concentration. Transformation of MLSi to BLSi in CaSi2Fx was predicted to occur at x = 0.63 based on cluster expansion (CE) and density functional theory (DFT) analyses, and these results agreed well with HAADF-STEM observations. The occurrence of F aggregation at low concentrations was also confirmed by Monte Carlo simulations using the interaction parameters obtained in CE analysis. Bader charge analysis, DFT calculations of charged states, and ab initio molecular dynamics simulations indicated that the aggregated F atoms withdrew electrons from MLSi, destabilizing the buckled honeycomb structure of MLSi in CaSi2. This charge imbalance caused the transformation of MLSi to the covalent-like BLSi.

Engineered two-dimensional nanomaterials: an emerging paradigm for water purification and monitoring

Water scarcity has become an increasingly complex challenge with the growth of the global population, economic expansion, and climate change, highlighting the demand for advanced water treatment technologies that can provide clean water in a scalable, reliable, affordable, and sustainable manner. Recent advancements on 2D nanomaterials (2DM) open a new pathway for addressing the grand challenge of water treatment owing to their unique structures and superior properties. Emerging 2D nanostructures such as graphene, MoS₂, MXene, h-BN, g-C₃N₄, and black phosphorus have demonstrated an unprecedented surface-to-volume ratio, which promises ultralow material use, ultrafast processing time, and ultrahigh treatment efficiency for water cleaning/monitoring. In this review, we provide a state-of-the-art account on engineered 2D nanomaterials and their applications in emerging water technologies, involving separation, adsorption, photocatalysis, and pollutant detection. The fundamental design strategies of 2DM are discussed with emphasis on their physicochemical properties, underlying mechanism and targeted applications in different scenarios. This review concludes with a perspective on the pressing challenges and emerging opportunities in 2DM-enabled wastewater treatment and water-quality monitoring. This review can help to elaborate the structure-processing-property relationship of 2DM, and aims to guide the design of next-generation 2DM systems for the development of selective, multifunctional, programmable, and even intelligent water technologies. The global significance of clean water for future generations sheds new light and much inspiration in this rising field to enhance the efficiency and affordability of water treatment and secure a global water supply in a growing portion of the world.

Improved synthesis of Ti3C2Tx MXenes resulting in exceptional electrical conductivity, high synthesis yield, and enhanced capacitance

For the first time, an "Evaporated-Nitrogen" Minimally Intensive Layer Delamination (EN-MILD) synthesis approach is reported to synthesize exceptionally high quality MXene sheets. In the EN-MILD method, the concentrations of acids and Li-ions are continuously increased during the etching process. By implementing the EN-MILD approach, the electrical conductivity increases up to 2.4 × 104 S cm-1, which is the highest reported value to date for Ti3C2Tx MXenes (a traditional MILD approach results in a conductivity of 5.8 × 103 S cm-1). This significant improvement in electrical conductivity arises from the high quality of the synthesized MXene sheets as well as a larger flake size. The EN-MILD synthesis approach also offers high yield of delaminated single MXene layers (up to ∼60% after the first round of washing/centrifugation) and high colloidal concentrations (up to 31 mg ml-1). The working electrode prepared from free-standing MXene paper shows an exceptional capacitance of ≈490 F g-1 at 1 A g-1 in a supercapacitor, which is among the highest values reported for MXene-based supercapacitor electrodes. The exceptional electrical conductivity, high yield of delaminated MXene single layers, and high colloidal concentration of the EN-MILD approach significantly expand the applications of MXenes.

Sb nanosheet modified separator for Li-S batteries with excellent electrochemical performance

An air-stable antimony (Sb) nanosheet modified separator (SbNs/separator) has been prepared by coating exfoliated Sb nanosheets (SbNs) successfully onto a pristine separator through a vacuum infiltration method. The as-prepared Li-S batteries using SbNs/separators exhibit much improved electrochemical performance compared to the ones using commercial separators. The coulombic efficiency (CE) of the Li-S battery using the SbNs/separator after the initial cycle is close to 100% at a current density of 0.1 A g-1, and 660 mA h g-1 capacity retained after 100 cycles. The rate capability of Li-S battery using SbNs/separator delivers a reversible capacity of 425 mA h g-1 when the current density increases to 1 A g-1. The improved electrochemical performance is mainly attributed to the following reasons. Firstly, the combination of physical adsorption and chemical bonding between SbNs and lithium polysulfides (LiPSs), which efficiently inhibits the shuttle phenomena of LiPSs. Secondly, the good electronic conductivity of SbNs improves the utilization of the adsorbed LiPSs, which benefits the capacity release of active materials. Lastly, the fast conversion kinetics of intermediate LiPSs caused by the catalytic effect from SbNs further suppresses the shuttle effect of LiPSs. The SbNs/separators exhibit a great potential for the future high-performance Li-S batteries.

Printable two-dimensional superconducting monolayers

Two-dimensional superconductor (2DSC) monolayers with non-centrosymmetry exhibit unconventional Ising pair superconductivity and an enhanced upper critical field beyond the Pauli paramagnetic limit, driving intense research interest. However, they are often susceptible to structural disorder and environmental oxidation, which destroy electronic coherence and provide technical challenges in the creation of artificial van der Waals heterostructures (vdWHs) for devices. Herein, we report a general and scalable synthesis of highly crystalline 2DSC monolayers via a mild electrochemical exfoliation method using flexible organic ammonium cations solvated with neutral solvent molecules as co-intercalants. Using NbSe₂ as a model system, we achieved a high yield (>75%) of large-sized single-crystal monolayers up to 300 µm. The as-fabricated, twisted NbSe₂ vdWHs demonstrate high stability, good interfacial properties and a critical current that is modulated by magnetic field when one flux quantum fits to an integer number of moiré cells. Additionally, formulated 2DSC inks can be exploited to fabricate wafer-scale 2D superconducting wire arrays and three-dimensional superconducting composites with desirable morphologies.

Effect of reactant sequence on the structure and properties of self-assembled TiO2 microspheres with exposed {001} surfaces

Highly exposed {001} surfaces of ITD-TiO₂ and IDT-TiO₂ microspheres with self-assembled hierarchical structure were prepared by the two-step hydrothermal method. The degradation rate of MO by ITD-TiO₂ was 99.0% after UV-light irradiation for 3.0 h.

Two-Dimensional Material-Based Biosensors for Virus Detection

Viral infections are one of the major causes of mortality and economic losses worldwide. Consequently, efficient virus detection methods are crucial to determine the infection prevalence. However, most detection methods face challenges related to false-negative or false-positive results, long response times, high costs, and/or the need for specialized equipment and staff. Such issues can be overcome by access to low-cost and fast response point-of-care detection systems, and two-dimensional materials (2DMs) can play a critical role in this regard. Indeed, the unique and tunable physicochemical properties of 2DMs provide many advantages for developing biosensors for viral infections with high sensitivity and selectivity. Fast, accurate, and reliable detection, even at early infection stages by the virus, can be potentially enabled by highly accessible surface interactions between the 2DMs and the analytes. High selectivity can be obtained by functionalization of the 2DMs with antibodies, nucleic acids, proteins, peptides, or aptamers, allowing for specific binding to a particular virus, viral fingerprints, or proteins released by the host organism. Multiplexed detection and discrimination between different virus strains are also feasible. In this Review, we present a comprehensive overview of the major advances of 2DM-based biosensors for the detection of viruses. We describe the main factors governing the efficient interactions between viruses and 2DMs, making them ideal candidates for the detection of viral infections. We also critically detail their advantages and drawbacks, providing insights for the development of future biosensors for virus detection. Lastly, we provide suggestions to stimulate research in the fast expanding field of 2DMs that could help in designing advanced systems for preventing virus-related pandemics.

A Mini Review of the Preparation and Photocatalytic Properties of Two-Dimensional Materials

The successful preparation and application of graphene shows that it is feasible for the materials with a thickness of a single atom or few atomic layers to exist stably in nature. These materials can exhibit unusual physical and chemical properties due to their special dimension effects. At present, researchers have made great achievements in the preparation, characterization, modification, and theoretical research of 2D materials. Because the structure of 2D materials is often similar, it has a certain degree of qualitative versatility. Besides, 2D materials often carry good catalytic performance on account of their more active sites and adjustable harmonic electronic structure. In this review, taking 2D materials as examples [graphene, boron nitride (h-BN), transition metal sulfide and so on], we review the crystal structure and preparation methods of these materials in recent years, focus on their photocatalyst properties (carbon dioxide reduction and hydrogen production), and discuss their applications and development prospects in the future.

Sol-gel synthesis of 2-dimensional TiO2: self-assembly of Ti-oxoalkoxy-acetate complexes by carboxylate ligand directed condensation

2-Dimensional (2D) metal oxides have many potential industrial applications including heterogeneous catalysis, water splitting, renewable energy conversion, supercapacitor applications, biomaterials, gas separation and gas storage. Herein we report a simple and scalable method for the preparation of 2D TiO₂ nanostructures by reaction of titanium isopropoxide with acetic acid at 333 K in isopropanol, followed by calcination at 673 K to remove the organic ligands. Both the products and reaction intermediates have been studied using electron microscopy, X-ray diffraction, N₂ physisorption, nuclear magnetic resonance, thermogravimetric analysis, and X-ray photoelectron, Raman, and infrared spectroscopy. The anisotropic condensation of the planar Ti₆O₄(OⁱPr)₈(OAc)₈ complex is believed to be responsible for the formation of the 2D structure, where OⁱPr and OAc represent isopropoxide and acetate ligands, respectively. This research demonstrates that the metal complexes are promising building blocks for desired architectures, and the self-assembly of an acetate bidentate ligand is a versatile tool for manipulating the shape of final products.

Multifunctional layered black phosphorene-based nanoplatform for disease diagnosis and treatment: a review

As an outstanding two-dimensional material, black phosphorene, has attracted significant attention in the biomedicine field due to its large surface area, strong optical absorption, distinct bioactivity, excellent biocompatibility, and high biodegradability. In this review, the preparation and properties of black phosphorene are summarized first. Thereafter, black phosphorene-based multifunctional platforms employed for the diagnosis and treatment of diseases, including cancer, bone injuries, brain diseases, progressive oxidative diseases, and kidney injury, are reviewed in detail. This review provides a better understanding of the exciting properties of black phosphorene, such as its high drug-loading efficiency, photothermal conversion capability, high 1O2 generation efficiency, and high electrical conductivity, as well as how these properties can be exploited in biomedicine. Finally, the research perspectives of black phosphorene are discussed.

2D Material Based Advanced Membranes for Separations in Organic Solvents

2D materials have shown high potentials for fabricating next-generation membranes. To date, extensive studies have focused on the applications of 2D material membranes in gas and aqueous media. Recently, compelling opportunities emerge for 2D material membranes in separation applications in organic solvents because of their unique properties, such as ultrathin mono- to few-layers, outstanding chemical resistance toward organic solvents. Hence, this review aims to provide a timely overview of the current state-of-the-art of 2D material membranes focusing on their applications in organic solvent separations. 2D material membranes fabricated using graphene materials and a few representative nongraphene-based 2D materials, including covalent organic frameworks and MXenes, are summarized. The key membrane design strategies and their effects on separation performances in organic solvents are also examined. Last, several perspectives are provided in terms of the critical challenges for 2D material membranes, including standardization of membrane performance evaluation, improving understandings of separation mechanisms, managing the trade-off of permeability and selectivity, issues related to application versatility, long-term stability, and fabrication scalability. This review will provide a useful guide for researchers in creating novel 2D material membranes for advancing new separation techniques in organic solvents.

Single Droplet Assembly for Two-Dimensional Nanosheet Tiling

Recent advances in two-dimensional (2D) materials offer an opportunity for atomic layer engineering of functional thin films and superlattices. For future applications of 2D materials, there is an urgent need to develop convenient deposition processes that enable precise control of thin-film architectures while reducing the time, cost, and energy/sample consumption. Here, we demonstrate a strategy for nanosheet assembly using a simple drop casting with a pipet and a hot plate. By controlled thermal convection of a single droplet on a hot plate, a range of 2D nanosheets, such as Ti_0.87O₂^0.52-, Ca₂Nb₃O₁₀^-, Ru_0.95O₂^0.2-, and graphene oxide, can be neatly tiled to form an ideal monolayer on various substrates in ∼30 s over a wide area (i.e., a 50 mmϕ substrate). The mechanism and control strategies are discussed. We also demonstrate the production of various functional coatings such as conducting, semiconducting, insulating, magnetic, and photochromic coatings in multilayer, superlattice, and submicrometer-thick forms, offering the potential for a convenient way to produce high-quality 2D nanosheet films.