A systematic review of the success of sinus floor elevation and survival of implants inserted in combination with sinus floor elevation

Oral health-related quality of life and satisfaction in edentulous patients rehabilitated with implant-supported full dentures all-on-four concept: a systematic review

OBJECTIVE

Address oral health-related quality of life (OHRQoL) and patient satisfaction rehabilitated by the all-on-four concept as the primary outcome.

MATERIAL AND METHODS

A search was performed in the PubMed/MEDLINE, Web of Science, and Cochrane databases according to the Preferred Reporting Items for Systematic Reviews and Meta-Analysis criteria (PRISMA). The PICO question was used to address the following specific question: "What is the level of oral health-related quality of life and satisfaction in edentulous patients and with atrophic jaws who received dental implants for full-arch implant-supported restorations following the all-on-four in the mandible or maxilla?"

RESULTS

Eleven studies including 693 patients aged 55 to 71 years were selected. The shortest follow-up period was 3 months and the longest, 7 years. Regarding the OHRQoL assessment method and patient satisfaction, the oral health impact profile (OHIP) and the visual analog scale (VAS) were the most used.

CONCLUSION

OHRQoL and satisfaction in patients whose rehabilitation was based on the all-on-four concept were high. However, the current evidence is still limited by the quality of the available studies, making long-term randomized studies necessary to establish the real effectiveness of this surgical-prosthetic approach.

CLINICAL RELEVANCE

Carefully analyze the aspects related to satisfaction and oral health-related quality of life of rehabilitated patients with implant-supported total prostheses made according to the all-on-four concept, aiming to achieve success through procedures with greater predictability and less complexity, as these are directly associated with recovery oral health of edentulous individuals with less morbidity and minimized costs.

Histomorphometric analysis of the sinus lateral wall and Schneiderian membrane: A cadaveric study

OBJECTIVES

Sinus augmentation is frequently used to maintain implant stability when there is severe alveolar bone loss. The aim of this study was to determine the thicknesses and histologic features of the sinus lateral wall and Schneiderian membrane in embalmed cadavers.

DESIGN

This study included 35 hemimaxillae from 25 cadavers (19 males and 6 females with a mean age at death of 59 years). Specimens obtained from the first premolar to the second molar were embedded in paraffin, stained with hematoxylin-eosin, and observed under a light microscope. The thicknesses of the lateral wall and Schneiderian membrane were measured according to tooth site and measurement level, and their histologic features were evaluated.

RESULTS

The mean thicknesses of the lateral wall were 2.22, 2.17, 2.64, and 2.64 mm at the first premolar, second premolar, first molar, and second molar, respectively, and 2.79, 2.24, and 2.12 mm at 0, 2, and 8 mm from the sinus floor. The mean thickness of the Schneiderian membrane did not differ significantly between at the sinus floor (0.41 mm) and 2 mm above the floor (0.38 mm). The lateral wall consisted of the outer cortical plate, trabecular bone in the center, and the inner cortical plate near the Schneiderian membrane, being the inner cortical plate the more porous.

CONCLUSIONS

These histomorphometric results for the sinus lateral wall and Schneiderian membrane are expected to provide relevant information for use in sinus augmentation procedures.

Effect of Schneiderian membrane integrity on bone formation in sinus augmentation: An experimental study in rabbits

AIM

To assess the effect of Schneiderian membrane (SM) perforation on bone formation by applying a particulate deproteinized bovine bone mineral (PBBM).

MATERIALS AND METHODS

Bilateral sinus augmentation was performed in eight rabbits. The same amount of PBBM was placed at a sinus where the SM was intentionally perforated for the perforation group (standardized to 3 mm diameter) and the other sinus with an intact SM that served as the intact group. At 12 weeks, all animals were euthanized for radiographic and histomorphometric analyses.

RESULTS

The area of the newly formed bone in the perforation group was significantly less than that in the intact group (18.7% and 25.5%, respectively, p = .028). The newly formed bone in the area close to the perforated SM was significantly less than that in the intact group (18.7% and 26.1%, respectively, p < .05). However, there was no significant difference in the total augmented area (p = .234) and the total augmented volume (p = .382) between the two groups.

CONCLUSION

SM perforation had an adverse effect on new bone formation, predominantly close to the area of membrane perforation. However, no significant difference was found in the total augmented volume between the SM perforation and the intact groups.

Short versus standard implants associated with sinus floor elevation: An umbrella review of meta-analyses of multiple outcomes

STATEMENT OF PROBLEM

Bone loss in the edentulous posterior maxilla complicates dental implant placement. In spite of the evidence available, there is continued uncertainty about the benefit of short implants for different outcomes.

PURPOSE

The purpose of this review was to evaluate the existing evidence for short and standard implants in association with sinus floor elevation regarding implant survival, marginal bone loss, and complications by using an umbrella review of the evidence across meta-analysis of interventional studies.

MATERIAL AND METHODS

Medline, Scopus, and Cochrane Library were searched to identify systematic reviews and meta-analyses comparing short implants and standard implants associated with sinus floor elevation. Data extraction and methodological quality (AMSTAR-2) was assessed by 2 authors independently. Outcomes were categorized and tabulated to assess effectiveness. Qualitative data were analyzed using thematic synthesis. The certainty of the evidence was evaluated with the Grading of Recommendations Assessment, Development, and Evaluation (GRADE) approach.

RESULTS

From 2011 studies, 7 systematic reviews (66 studies) were included as per the eligibility criteria. There was no statistically significant difference between groups for implant survival (risk ratio=1.08; P=.79), and the qualitative analysis did not show differences for prosthetic outcomes. Standard implants were associated with fewer prosthetic complications in the quantitative analysis (risk ratio=3.27; P<.01), but no difference was found between the treatments in the qualitative analysis. Short implants showed reduced marginal bone loss (0.98 ±0.12 mm; mean difference=-0.22; P<.01) and better biologic outcomes (risk ratio=0.16; P<.01). Patient satisfaction was similar for both groups, whereas costs and time for the procedure favored short implants. The quality of the evidence was graded as "critically low" (57.1% of the reviews) and "low." There was a high certainty of evidence for implant survival, whereas marginal bone loss and complications had moderate certainty.

CONCLUSIONS

Short implants had a better or equal performance compared with standard implants for all outcomes assessed. However, assumptions were based on reviews with low or critically low quality of the evidence, suggesting the development of high-quality systematic reviews in this field.

Immediate implant placement following tooth extraction with simultaneous lateral sinus augmentation: a retrospective clinical study after at least 1 year of loading

Background

Lateral sinus augmentation is necessary when the residual bone height is insufficient in the posterior maxilla. Immediate implant placement following tooth extraction with lateral sinus augmentation will shorten the number of operations and treatment time.

Purpose

To evaluate radiologic and clinical results for at least 1 year after loading in patients who underwent tooth extraction, implant placement, and lateral sinus augmentation at the same time.

Materials and methods

We retrospectively evaluated 35 implants placed in 25 patients. Preoperative and postoperative CBCT were compared and analyzed for residual bone height (RBH) and increased bone height (IBH), the initial torque value (ITV), and the implant stability quotient (ISQ). A comparative evaluation was performed between a 1-stage (non-submerged) group and a 2-stage (submerged) group. After loading for at least 1 year, clinical and radiological evaluations were performed to evaluate the survival rate.

Results

One of the 35 implants failed in osseointegration, and the remaining 34 showed successful results. The failure-free survival rate at 1 year was 97.06% (95% CI, 91.38-100.0%). The RBH ranged from 3.1 to 9.6 mm (mean, 5.62 ± 1.68 mm), and the IBH ranged from 3 to 15.3 mm (mean, 8.87 ± 2.74 mm). Among the RBH, ITV, ISQ, treatment period, final bone height, and failure evaluation by stage of implant placement, only ISQ showed statistical significance between the groups (p < .001). A comparison of RBH, ITV, and ISQ, regardless of group, showed that each value tended to increase, but there were no statistically significant differences.

Conclusions

Immediate implant placement following tooth extraction with simultaneous lateral sinus augmentation is considered reliable even though the procedures had been performed at the same time.

Argon Bioactivation of Implants Installed Simultaneously to Maxillary Sinus Lifting without Graft. An Experimental Study in Rabbits

Background: The treatment of the surface of titanium implants with argon plasma improved its hydrophilicity and cell adhesion, resulting in higher bone apposition on implant and graft surfaces. The spontaneous perforation over time of the sinus mucosa after sinus augmentation has been documented in experimental studies at both implants and graft particles. The aim of the present study was to evaluate the influence of plasma argon treatment of the implant surface on bone apposition and on the rate of sinus mucosa perforations. Methods: A sinus lifting procedure was performed bilaterally in sixteen rabbits, and implants, either treated with argon plasma or left without treatment (control), were placed simultaneously without grafts. After 8 weeks, histological analyses were carried out. Results: A collapse of the sinus mucosa was observed at all implants. Twenty-four out of thirty-two implants presented sinus mucosa perforations at the apex. Several perforations were also found at the threads. Thinned mucosa sites (width < 40 µm) were found around almost all implants. About 2.6–2.9 mm of the apical regions of the implant did not present signs of osseointegration and about 1.3 mm were exposed to the sinus cavity. No statistically significant differences were found between plasma and control sites. Conclusions: In conclusion, the sinus mucosa was damaged and perforated by direct contact with treated and non-treated implant surfaces. The treatment of the implant surface with argon plasma did not affect the outcomes.

A Pilot Investigation Generating an Alternative Therapeutic Strategy Combining Deproteinized Bovine Bone and Gelatin Sponge for a Novel Implant Material in Sinus Floor Elevation Operation

Background

Implant placement in the posterior maxilla is typically complicated by a shortage of bone. Gelatin sponge could be combined with an appropriate material to enhance mechanical strength and maintain stability of an implant. This study aimed to evaluate the clinical application of bone grafting with bovine bone mixed with gelatin sponge.

Material/Methods

Fifty-four patients were divided into a control group (deproteinized bovine bone, n=26) and a test group (deproteinized bovine bone combined with gelatin sponge, n=28). Implants were placed in patients simultaneously after surgery (operation). Cone-beam computed tomography examination was carried out immediately and 6 months after surgery. Space with grafting materials was measured with Mimics software (version 16.0).

Results

No remarkable differences were found for simultaneous placement, height of residual bone, delayed placement, width of residual bone, graft volume immediately after surgery (V₁), graft volume 6 months after surgery (V₂), or volumetric change rate between the test group and the control group (P>0.05). Graft volume V₂ was remarkably decreased compared with V₁ in the control and test groups (P=0.01). There were no significant differences for bone height immediately after surgery (H₁) and bone height at 6 months after surgery (H₂) between the 2 groups. Bone height H₂ was markedly decreased compared with H₁ (P<0.05). At 1 year after implantation, there was 1 implant loss in the control group and 2 in the test group. The implant survival rate in the control group was 97.62% and 95.24% in the test group.

Conclusions

Absorbable gelatin sponge combined with bovine bone particles was an effective and economical material for use in routine sinus floor elevation surgery.

Lateral Window Osteotomy in Maxillary Sinus Augmentation: Does a Combination of Two Surgical Protocols Offer Any Advantage? A Retrospective Analysis of Clinical Outcome

Purpose

Maxillary sinus augmentation using the lateral bone window approach has been well documented and studied, with the advent of many newer techniques and instruments. It is prudent that operators make a choice based on scientific evidence and feasibility guided by each case. The purpose of this study is to analyze whether a combination of more than one method could prove beneficial when compared to any one method alone.

Materials and Methods

Radiographic and clinical data from 48 augmented maxillary sinuses in 42 male and female patients was collected and the clinical outcome analyzed based on different clinical parameters. Data collected from 48 augmented maxillary sinuses was divided into 4 groups based on the osteotomy method used. A comparison was made between rotary diamond bur (Group 1), the piezosurgical device (Group 2), a hand-held bone scraper (Group 3) and a combination of method 1 and 3 (Group 4). Mean wall thickness for the maxillary Bucco-facial wall was measured for all cases. Clinical parameters measured included time taken to complete the osteotomy, membrane perforation, operator fatigue, anastomotic vessel damage and autogenous bone collected.

Results

Mean time taken for Group 1 was 17.33 min, Group 2 was 34.83 min, Group 3 was 38 min, Group 4 19.5 min. Membrane perforations were highest in Group 1 & 2 at 16.66%. Groups 2 and 4 showed the least chances of damage to the vessel at 16.66%. Significance of operator fatigue was highest at 16.66% in Group 4.

Conclusions

It was concluded that there may be an advantage in selecting a combination of surgical protocols in accordance with the lateral wall thickness. The advantages may extrapolate to safety, simplicity and ergonomics of surgical approach compared to any one technique alone.

Gingival Biotype and Its Relationship With the Maxillary Membrane and Lateral Wall Thickness

The purpose of this study was to analyze the risk of the maxillary sinus lift technique and the correlation between the thickness of the gingiva, maxillary sinus membrane, and the maxillary sinus lateral wall. Cone-beam computerized tomograhy (CBCT) records of 32 adult dentate patients (10 male/22 female) were analyzed. The gingival thickness records of the dental units were compared with the thickness measurements of the membrane and lateral wall of the maxillary sinus. The gingival biotypes varied between 1.1 mm (thin) and 1.6 mm (thick), with a small association with sex. The thickness of the sinus membrane presented a small association between sexes (0.2 mm, female/0.3 mm, male) and gingival biotypes (Cohen d = .52). The lateral wall presented a weak association between the biotypes (1.3 mm, thin/1.1 mm, thick). There was also no correlation between the membrane and lateral wall (r = -.22). The volume dimension related to the graft area of the sinus was 4 mm3 for men and 5 mm3 for women. There was a weak correlation of gingival thickness compared with membrane thickness and lateral wall of the sinus (r = .304/r = -.31). Gingival thickness does not appear to be a reliable thickness predictor of the membrane or lateral wall of the maxillary sinus. The analysis of maxillary sinus anatomical structures through CBCT is the most reliable technique to identify the thickness of the membrane and lateral wall of the maxillary sinus before surgery. We believe that new studies are necessary to confirm our findings.

Maxillary Sinus Augmentation Using Ceramic Alloplastic Granules or Paste: An Experimental Study in Rabbits

BACKGROUND

Due to the lack of data comparing the biological behavior of two formulations, granules and paste, of alloplastic graft from microtomographic and histomorphometric points of view, the aim of the present experiment was to compare the histomorphometric and microtomographic healing of two formulations, i.e., granules (MR sites) or paste (MR-inject sites) of an alloplastic graft composed of a combination of beta-tricalcium phosphate and hydroxyapatite used for maxillary sinus lifting.

METHODS

A sinus lifting procedure was carried out bilaterally in 20 rabbits, and the elevated space was filled with either paste or granules of an alloplastic material. A collagen membrane was placed on the antrostomy and the animals were euthanized after 2 or 10 weeks, 10 animals each group. Microtomographic and histological analyses were performed.

RESULTS

Higher proportions of new bone formation were found at the MR, compared to the MR-inject sites both after 2 weeks (2.65 ± 2.89% vs. 0.08 ± 0.12%; p < 0.01) and 10 weeks of healing (34.20 ± 13.86 vs. 23.28 ± 10.35%; p = 0.022).

CONCLUSIONS

It was concluded that new bone formation was faster in the MR sites, compared to the MR-inject. However, a longer time of healing should be allowed to make final conclusions about the efficiency in bone formation of the paste formulation of the biomaterial used in the present study.

Assessment of maxillary sinus lifting procedure in the presence of chronic sinusitis, a retrospective comparative study

INTRODUCTION

Chronic sinusitis can be considered a relative contraindication for sinus lifting procedure. However, its specific effects on bone height, infection and healing have not been as well investigated as its incidence as a post-operative complication.

METHODS

A retrospective comparative investigation was executed to evaluate the impact of chronic sinusitis on sinus lifting procedures regarding bone height, infection, and healing scores. Pre-operative and 6-month postoperative records (CBCT or CT and panoramic radiographs) of 40 patients who underwent sinus lifting procedure with graft and implant placement were split into two sets of 20 patients each; Group A is comprised of a patient with healthy sinus, whereas Group B includes patients with chronic sinusitis (identified as the presence of thickening of Schniederian membrane ≥ 2 mm, mucosal cyst, polyp or fluid level). Records of both groups were assessed for the difference in bone height of alveolar ridge between pre-operative radiograph and after six months postoperatively, and clinical notifications at the postoperative follow-up to report the healing and infection scores.

RESULTS

Statistically, there was non-significant difference in mean bone height gain (p-value > 0.05) in comparison to control group mean bone height (8.84 ± 0.93). Also, there was non-significant variation in mean healing and infection scores.

CONCLUSION

According to the available data, chronic sinusitis presenting as a thickening in the Schneiderian membrane has no significant effect on postoperative bone height, healing, or infection score in patients undergoing sinus augmentation with simultaneous implant placement. Further research is needed to better evaluate the effect of chronic sinusitis and its current status as a relative contraindication for sinus lifting procedure.

Short implants without bone augmentation vs. long implants with bone augmentation: systematic review and meta-analysis

PURPOSE

Anatomical limits such as the location of the lower alveolar nerve, the maxillary sinus in atrophied jaws might extend implant surgery treatment. The purpose of this systematic literature review is to review the literature and determine whether short implants can be an effective alternative to standard-length implants after bone augmentation.

MATERIALS AND METHODS

A systematic search was performed on PRISMA wizard. Searched for clinical trials 2010-2020 in the Medline database. The keywords chosen are "short versus long implants, augmented bone, clinical trial", and their various variations.

RESULTS

Meta-analyses of the studies of implant loss after 1, 3 and 5 years showed a statistically insignificant difference between groups. The number of complications after 1 year was statistically significantly higher in the control group. Meta-analyses with follow-up periods of 3 and 5 years showed a statistically insignificant difference; Meta-analyses of studies of marginal bone loss after 1, 3 and 5 years showed a statistically insignificant difference between the groups.

CONCLUSIONS

Short dental implants may be a suitable alternative to standard length dental implants after bone augmentation. The risk of their complications is possibly lower because of the lack of need for bone augmentation.

Non-grafted versus grafted sinus lift procedures for implantation in the atrophic maxilla: a systematic review and meta-analysis of randomized controlled trials

The aim of this systematic review and meta-analysis was to critically evaluate the currently existing clinical evidence on the efficacy of graftless maxillary sinus membrane elevation for implantation in the atrophic posterior maxilla. A search protocol without limitations to November 2020 was followed by two independent researchers. Randomized controlled trials using the lateral window approach for graftless sinus membrane elevation were included. Uncontrolled, retrospective, non-comparative studies, case reports, and experimental studies in animals or cadavers were excluded. The search identified 2777 studies. Critical selection by two independent researchers then led to the inclusion of a total of nine studies. A risk of bias assessment was applied using the revised Cochrane risk-of-bias tool for randomized trials. A meta-analysis was conducted for seven studies. Results showed a high overall implant survival rate in both the graftless and bone-grafted sinus lift groups (97.92% and 98.73%, respectively). The graftless sinus lift group showed a significantly lower vertical bone height gain, with a mean difference of -1.73mm (P=0.01), and a significantly lower bone density, with a mean difference of -94.7 HU (P<0.001). The implant stability quotient values did not differ significantly between the test and control groups (P=0.07).

A New Approach for Lateral Sinus Floor Elevation

The lateral sinus lift procedure has been extensively investigated and described as a reliable surgical solution aimed at facilitating implant placement and rehabilitation when the posterior upper maxilla is atrophic. The standard technique consists in a lateral antrostomy, the careful raising of the sinus membrane, and following apposition of a bone substitute between the membrane and the sinus floor. The present technical note illustrates a new conservative technique enabling lateral sinus lift without the use of bone substitutes and with predictable outcomes.

Long-Term Comparison of Survival and Marginal Bone of Implants with and without Sinus Augmentation in Maxillary Molars within the Same Patients: A 5.8- to 22-Year Retrospective Study

Maxillary sinus floor augmentation (MSFA) is widely used and considered a predictable procedure for implant placement. However, the influence of MSFA on implant survival and marginal bone loss (MBL) is still inconclusive. The purpose of this retrospective observational study is to evaluate the long-term genuine influence of MSFA on the survival and MBL of implants by comparing those with and without MSFA only in maxillary molars within the same patients. Thirty-eight patients (28 male and 10 female), with a total of 119 implants, received implants with and without MSFA, and were followed up for 5.8 to 22 years. Patient- and implant-related factors were assessed with a frailty model for implant survival and with generalized estimation equations (GEE) for MBL around the implant. No variables showed a statistical significance for implant failure in the frailty model. In GEE analysis for MBL, MSFA did not show any statistical significance. In conclusion, MSFA demonstrated no significant influence on implant failure and MBL in posterior maxilla in this study.

Tissue Level Changes after Maxillary Sinus Floor Elevation with Three Types of Calcium Phosphate Ceramics: A Radiological Study with a 5-Year Follow-Up

This study evaluates the radiological changes in tissue height after maxillary sinus floor elevation (MSFE) using three types of calcium phosphate ceramics over a period of up to 5 years after dental implant placement. In 163 patients, MSFE was performed. Three groups of patients were distinguished and treated based on the type of calcium phosphate ceramic used and radiologically evaluated: 40 patients with β-tricalcium phosphate (β-TCP), 76 patients with biphasic calcium phosphate (BCP) 20% hydroxyapatite (HA)-80% β-TCP, and 47 patients with BCP 60% HA-40% β-TCP. Radiological measurements were performed on panoramic radiographs at several time points up to 5 years after dental implant placement. After MSFE, a slow decrease in tissue height measured over time was seen in all three study groups. Resorption of the grafted bone substitutes was more prominent in β-TCP than in BCP ceramics with an HA component (60/40 and 20/80). Loss of tissue height after 5 years was lowest in BCP 60/40 and highest in β-TCP. This radiological study shows a predictable and comparable behavior of the slow decrease in tissue height over time for all three types of calcium phosphate ceramics used in MSFE. The fraction of HA in calcium phosphate ceramics and dental implant loading seems to be beneficial for tissue height maintenance after MSFE.

Intraoperative and postoperative outcomes of sinus floor elevation using the lateral window technique versus the hydrodynamic transalveolar approach: a preliminary randomized controlled trial

OBJECTIVES

To compare the clinical and radiographic outcomes of two sinus floor elevation techniques: the conventional lateral window technique versus the transalveolar approach using a hydrodynamic ultrasonic device.

MATERIALS AND METHODS

The study was designed as a randomized controlled clinical trial, and participants were randomly allocated to the control group (lateral window: LW) or to the test group (hydrodynamic transalveolar approach: HTA). The intraoperative and postoperative data, including procedure duration and patient-reported outcome measures (PROMs), were collected during the surgery and up to 1 year post-surgery. Additionally, qualitative assessment of gained bone volumes and implant survival rates was recorded.

RESULTS

Twenty-two patients were included in the study. The mean surgical time was significantly longer in the HTA compared to the LW group (48.1 ± 11.2 min vs. 35.2 ± 9.1 min, P = 0.0011). Perforation of the Schneiderian membrane occurred in 2/11 and 5/11 patients in the LW and the HTA group, respectively (P = 0.36). Postoperatively, higher morbidity and consumption of nonsteroidal anti-inflammatory drugs (NSAIDs) were associated with the LW group. However, self-reported satisfaction with surgical procedures was similar in the two groups. At 1 year, implant survival rates of 80% in the HTA group and 100% in the LW group were recorded (P = 0.12).

CONCLUSIONS

Although the new transalveolar approach seems to reduce postoperative morbidity, an increased risk of intraoperative complications compared to the LW approach needs to be considered when choosing a technique.

CLINICAL RELEVANCE

Our results provide new insights regarding clinical and radiographic outcomes of HTA and may help further determine indications for its use.

TRIAL REGISTRATION

ClinicalTrivals.gov : NCT04499625.

Factors influencing the sinus membrane thickness in edentulous regions: a cone-beam computed tomography study

BACKGROUND

During implant treatment in the maxillary molar area, maxillary sinus floor augmentation is often performed to ameliorate the reduced alveolar bone height attributable to bone remodeling and pneumatization-induced expansion of the maxillary sinus. However, this augmentation may cause complications such as misplaced implants, artery damage, and maxillary sinus mucosal perforation; infections like maxillary sinusitis; and postsurgical complications such as bone graft leakage and postoperative nasal hemorrhaging. To reduce the complications during maxillary sinus floor augmentation and postoperative infections, we performed retrospective investigations of various systemic and local factors that influence pre-operative sinus mucosal thickness (SMT) by using cone-beam computed tomography (CBCT). Subjects included patients who underwent maxillary sinus floor augmentation in an edentulous maxillary molar area with a lateral approach. Pre-operative SMT, existing bone mass, and nasal septum deviation were measured using CBCT images. Relationships between SMT and the following influencing factors were investigated: (1) age, (2) sex, (3) systemic disease, (4) smoking, (5) period after tooth extraction, (6) reason for tooth extraction, (7) residual alveolar bone height (RBH), (8) sinus septa, and (9) nasal septum deviation. Correlations were also investigated for age and RBH (p < 0.05).

RESULTS

We assessed 35 patients (40 sinuses; 11 male, 24 female). The average patient age was 58.90 ± 9.0 years (males, 57.9 ± 7.7 years; females, 59.9 ± 9.4 years; age range, 41-79 years). The average SMT was 1.09 ± 1.30 mm, incidence of SMT > 2 mm was 25.0%, incidence of SMT < 0.8 mm was 50.0%, and the average RBH was 2.14 ± 1.02 mm. The factors that influenced SMT included sex (p = 0.0078), period after tooth extraction (p = 0.0075), reason for tooth extraction (p = 0.020), sinus septa (p = 0.0076), and nasal septum deviation (p = 0.038).

CONCLUSIONS

Factors associated with higher SMT included male sex, interval following tooth extraction < 6 months, periapical lesions, sinus septa, and nasal septum deviation. Factors associated with SMT > 2 mm were sex and reason for tooth extraction, while factors associated with SMT < 0.8 mm were time following tooth extraction and nasal septum deviation. Despite the limitations of this study, these preoperative evaluations may be of utmost importance for safely conducting maxillary sinus floor augmentation.

The effect of anatomy on osteogenesis after maxillary sinus floor augmentation: a radiographic and histological analysis

OBJECTIVES

To assess how anatomy and osteogenesis correlated with results of maxillary sinus floor augmentation (MSFA).

MATERIALS AND METHODS

Patients with partial edentulism and advanced atrophy of the posterior maxillae (≤ 4 mm residual bone height, RBH) underwent MSFA with sole deproteinized bovine bone matrix (DBBM) through a lateral approach. After a 6 to 9-month healing period, bone core biopsies were obtained from the sites of implant insertion for histological evaluation. The correlations between anatomical and histomorphometric variables were analyzed in a multiple regression model.

RESULTS

Forty-nine patients were recruited. One biopsy per patient was obtained from the augmented sinus. Thirty-seven bone core biopsies were intact and met the requirement for histomorphometry analysis. The mean (± standard deviation) percentages of vital bone (VB), remaining DBBM, and non-mineralized tissue were 18.25 ± 4.76%, 27.74 ± 6.68%, and 54.08 ± 6.07%, respectively. No statistically significant correlations were found between RBH and VB% (p = 0.44) or between sinus contour and VB% (p = 0.33). However, there was an inverse correlation between the sinus width (SW) and VB % (SW₁: R² = 0.13, p = 0.03; SW₂: R² = 0.15, p = 0.02).

CONCLUSIONS

After a healing period of 6-9 months, wider sinuses augmented with DBBM alone tended to have a lower proportion of new bone formation, while RBH and sinus contour did not appear to affect osteogenesis after MSFA.

CLINICAL RELEVANCE

This study emphasized the effect of anatomy on osteogenesis after MSFA. The result of the study may have an indication to the clinician that SW is a consideration when selecting the bone grafting material and deciding the healing period of MSFA.

Relative performance of various biomaterials used for maxillary sinus augmentation: A Bayesian network meta-analysis

OBJECTIVES

To assess the histomorphometric outcomes obtained in randomized clinical trials (RCTs) with different biomaterials used for maxillary sinus augmentation (MSA).

MATERIALS AND METHODS

A search of the existing medical literature until October 1, 2019, was performed. Inclusion criteria were (a) RCTs assessing a two-stage MSA from the lateral approach using autologous bone or biomaterials for grafting and (b) reported histomorphometric outcomes based on crestal bone core biopsy samples. The Bayesian method was used to perform pairwise meta-analyses and network meta-analysis (NMA). The primary outcome, the new bone percentage (NB %), was calculated as mean differences with 95% credible intervals. The interventions were ranked by their posterior probability by calculating the surface under the cumulative ranking curve values.

RESULTS

Thirty-four RCTs (842 MSAs) were included in the analysis with a normal healing period (5-8 months). All comparisons were presented in a league table. On the basis of the ranking probability, the most effective bone grafting material for NB% was bovine xenograft + bone marrow concentrate (BMC) (81%), followed by bovine xenograft + platelet-rich plasma (PRP) (77%), bioactive glass ceramic + autologous bone 1:1 (70%), nanocrystalline hydroxyapatite in silica gel (70%), and bioactive glass ceramic (70%). Autologous bone graft alone took the twelfth position with 57%.

CONCLUSION

Within the limitations of the present NMA, the analysis did not confirm autologous bone alone as the gold standard for MSA and showed superiority of composite grafts such as bovine xenograft + BMC after 5-8 months of healing.

Sinus Floor Elevation via an Osteotome Technique without Biomaterials

According to classic Hirschfeld studies, the first teeth to be lost are the first and second maxillary molars. After the teeth are extracted and the alveolar process is developed, the maxillary sinus is reabsorbed and pneumatized with a decrease in bone availability in the posterior sector of the maxilla. This process often creates the need to perform regeneration techniques for the placement of implants in this area due to the low availability of bone. The most frequently used and documented technique for the elevation of the sinus maxillary floor is elevation by the side window, as proposed by Tatum. In 1994, Summers proposed a technique that allowed the elevation of the sinus floor from a crestal access using an instrument called an osteotome, as well as the placement of the implant in the same surgical act. The aimed of the study was to evaluate the survival of 32 implants placed in posterior maxilla with bone availability less than 5 mm performing a sinus lift augmentation technique with osteotome without biomaterials. The results of this study show a survival rate of 100% for 32 implants placed in situations with an initial bone availability of 2 to 5 mm without the use of graft material. The infra-drilling technique used offers an increase in the primary stability of implants that allows adequate osteointegration Implants placed were charged at 12 weeks. In all cases, spontaneous bone formation was observed, even in cases where a positive Valsalva maneuver was observed. This proposed technique reduces treatment time and the need for more invasive maxillary sinus augmentation techniques.

The impact of anatomic, patient and surgical factors on membrane perforation during lateral wall sinus floor elevation

OBJECTIVES

This retrospective study aimed to evaluate the influence of anatomical, patient and surgical factors on the occurrence of membrane perforation (MP) during lateral window sinus floor elevation (LWSFE).

MATERIAL AND METHODS

A review of LWSFE patient records between 2014 and 2019 accounted for MP occurrence, window surface area (WSA), intravenous sedation use, osteotomy instrument type and clinician experience. Preoperative cone beam computed tomography (CBCT) scans were analyzed for lateral wall thickness (LWT), LFM and LAM angles formed between lateral and medial walls at the floor and anterior wall, respectively, sinus width at 5-, 10- and 15-mm (LM-5, LM-10 and LM-15) from the floor, residual bone height (RBH), sinus pathologies, septa and arterial anastomoses. The generalized estimating equation (GEE) approach with a sandwich variance-covariance estimator was used to evaluate the associations with MP.

RESULTS

MP occurred in 25.74% of 202 LWSFE procedures (166 patients). Mean 1.6 mm-LWT, 3.2 mm-RBH, 95°-LFM, 75.5°-LAM, 12 mm-LM-5, 20.79% septa, 16.83% arterial anastomosis, 37.62% sinus pathology and 29.21% intravenous sedations, 85.24% WSA ≥ 40 mm² and 57% >10 procedures/clinician were reported. Greater MP rates were encountered as follows: 38.3% (LWT ≥ 1.5 mm), 38% (LFM < 90°), 59.6% (LAM < 70°), 45.4% (LM-5 < 10 mm) and 36.4% (WSA ranged > 80 mm² ), with statistically significant associations with all these outcomes (p < .05). The presence of pathologies was also associated with MP (p = .013). Associations between MP and the presence of septa and arterial anastomoses, age/gender, right/left sinus, RBH, clinician's experience, instrument type and intravenous sedation use could not be demonstrated.

CONCLUSIONS

MP is significantly associated with thicker lateral walls, narrower sinuses, larger windows and existing sinus pathology.

[Retrospective study on transcrestal sinus floor elevation with simultaneous implantation of short implants]

OBJECTIVE

To explore the changes in bone height of the maxillary sinus floor at different sinus ridge heights after transcrestal sinus floor elevation (tSFE) with the simultaneous implantation of short implants.

METHODS

A total of 74 Bicon short implants were implanted into 37 patients during the same period of maxillary sinus elevation. The residual bone height (RBH)<4 mm group has 43 sites, and the RBH≥4 mm group has 31 sites. After 5 years of follow-up observation, the implant survival rate and the change in bone height achieved in the maxillary sinus over time were measured and analyzed via clinical examination and X-ray imaging.

RESULTS

In the 74 implantation sites, the elevation height of the sinus floor was (6.64±1.32) mm and the bone height of the sinus floor was (3.35±1.29) mm 5 years after loading. No statistical difference was observed in the bone resorption of the implant neck between the RBH<4 mm and RBH≥4 mm groups. Meanwhile, a statistical difference was noted in the bone height obtained in the maxillary sinus between the two groups.

CONCLUSIONS

When RBH in the maxillary posterior tooth area was <4 mm, the simultaneous implantation of Bicon short implants with tSFE can achieve a high implant survival rate and bone gain in the maxillary sinus, but does not increase the absorption of the alveolar ridge bone.

Long-term crestal bone changes in implants placed in augmented sinuses with minimal or moderate remaining alveolar bone: A 10-year retrospective case-series study

OBJECTIVES

To evaluate long-term clinical and radiographic outcomes of dental implants placed after lateral window sinus augmentation utilizing the sagittal sandwich technique.

MATERIALS AND METHODS

Patients treated with sinus augmentation were included in this retrospective case-series study. The surgical procedure was performed with particulate autogenous bone- and anorganic bovine bone-derived mineral (3:7 ratio). Implants were grouped based on baseline residual alveolar ridge height: group S (residual alveolar ridge height of 0.1-3.5 mm), group M (height of 3.5-7mm), and group C (native bone). Radiographs were taken at baseline (abutment installation) and annually throughout the 10-year follow-up.

RESULTS

A total of 86 patients (92 sinus lifts) and 209 implants were included. Ten sinus membrane perforations were recorded (11% incidence), and graft infections occurred in 3 cases (3.2% incidence). During the 10-year follow-up, 3 implants (1.4%) failed. No significant differences in the mean implant marginal bone loss (MBL) between the three groups were found after 1-, 2-, and 5-year follow-up (p > .05). At 10 years, group C exhibited more MBL than group M with a mean difference of -0.53 mm (p = .01). After 10 years, MK III implants displayed significantly more bone loss in native bone than those in augmented bone with a mean difference of 0.48 mm (p = .02). Five patients and 7 implants developed peri-implantitis with no significant differences between the groups (p = .570).

CONCLUSION

Implant placement after two-stage sinus grafting utilizing the sagittal sandwich technique is a relatively safe and predictable procedure with minimal complications and MBL after 10-year follow-up.

Maxillary sinus augmentation with three different biomaterials: Histological, histomorphometric, clinical, and patient-reported outcomes from a randomized controlled trial

BACKGROUND

Lateral maxillary sinus augmentation (MSA) is a predictable bone regeneration technique in case of atrophy of the posterior-upper maxilla. Aimed at obtaining quantity and quality of bone suitable for receiving osseointegrated implants, its success is largely due to the skill of the surgeon, but also to the characteristics of the biomaterial used.

METHODS

Twenty-four patients needing MSA were included in the study. The patients were randomly allocated to three different groups: anorganic bovine bone mineral as control, tricalcium phosphate with or without hyaluronic acid (HA) as test groups. Nine months after MSA, bone biopsies were harvested for the histomorphometric analysis. Secondary outcomes were mean bone gain, intraoperative and postoperative complications, implant insertion torque, implant failure, and patient-reported outcome measures.

RESULTS

Although the percentage of new bone was not statistically different between the three groups (P = .191), the percentages of residual biomaterial was significantly higher (P < .000) and nonmineralized tissue significantly lower (P < .000) in the control than in the test groups. Test groups did not differ significantly from each other for all histomorphometric parameters. The implant insertion torque was significantly higher in the control group (P < .0005). The rest of the secondary outcomes were not significantly different between the groups.

CONCLUSION

MSA is a safe and predictable procedure in terms of histological, clinical, and PROAMs, regardless of the biomaterial used. The addition of HA did not influence the outcomes.

Three-dimensional CBCT based evaluation of the inferior part of the maxillary sinus: Retrospective Study

The maxillary sinus is the largest of the four paranasal sinuses in humans, and its close proximity to the teeth means that caution is required during dental treatment. In particular, implant surgeries involving the maxillary posterior teeth should include evaluating the inferior part of the maxillary sinus. The purpose of this study is to evaluate the differences by comparing the inferior part of the maxillary sinus based on the nasal cavity floor (NCF) between patients (male 30, female 30) genders through the use of the three-dimensional (3-D) program that can facilitate 3-D visualizations. The present study results obtained from 3-D visualizations using cone beam computed tomography (CBCT) data showed that the inferior part of the maxillary sinus was mostly larger in males than in females. In addition, the utilization of 3-D visualization data was more likely to assure accuracy than when using data obtained by two-dimensional (2-D) imaging. Therefore, 3-D visualizations of the inferior part of the maxillary sinus will contribute to accurate analyses of its anatomical structure during implant surgery and other operations. Further studies utilizing 3-D visualization will yield useful fundamental data and guidelines for future research.

Collagenated Synthetic Bone Substitute Material for Sinus Floor Elevation at Sites with a Perforated Schneiderian Membrane

Schneiderian membrane perforation (SMP) is the most common complication during sinus floor elevation (SFE). Conventional methods to repair SMP, such as using a collagen barrier, may be clinically demanding. The aim of the present study was to compare the effects of collagenated bone substitute materials with and without a collagen barrier to repair SMP during SFE in terms of new bone formation and dimensional stability. In 12 rabbits, intentional SMP was made during bilateral SFE. The rabbits were randomly assigned under two groups: the control group, in which the sinus was repaired with a collagen barrier, and the test group, in which the sinus was repaired without a collagen barrier. Collagenated bone substitute material was grafted in both groups. Healing periods of 2 weeks and 4 weeks were provided in both groups. There were no adverse clinical events. Histology revealed that the Schneiderian membrane had atrophied with loss of cilia and serous glands in both groups at 4 weeks. Histomorphometry revealed that the newly formed bone (test: 0.42 ± 0.17 mm², control: 0.36 ± 0.18 mm² at 2 weeks; test: 1.21 ± 0.36 mm², control: 1.23 ± 0.55 mm² at 4 weeks) or total augmented area did not significantly differ between the two groups at either time points (p > 0.05). In conclusion, collagenated bone substitute material without a collagen barrier demonstrated similar new bone formation and dimensional stability as that with a collagen barrier in repairing SMP.

The Influence of Residual Alveolar Bone Height on Graft Composition after Maxillary Sinus Augmentation Using Two Different Xenografts: A Histomorphometric Comparative Study

AIM

To evaluate the hypothesis of a correlation between the preoperative residual alveolar bone height (RBH) and graft maturation after maxillary sinus floor augmentation procedures using two different bone substitutes.

METHODS

A total of 20 patients who underwent unilateral maxillary sinus floor augmentation with either mineralized deproteinized bovine bone (DBBM) or a xenograft enriched with polymer and gelatin (NBS) were included in this prospective study. Six months after sinus surgery, bone biopsies were harvested with a 3.2 mm diameter trephine bur, prior to dental implant placement. Histomorphometric analysis was performed, and the results were correlated with the individual RBH. Implants were loaded after 5 months of insertion, and 1-year implant success and marginal bone level change were assessed.

RESULTS

RBH was 2.17 ± 1.11 mm (range 0.5-3.5 mm) and 2.14 ± 0.72 mm (range 0.5-3.0 mm) in the NBS and DBBM group, respectively. The biopsy analyses for the DBBM group showed woven bone increases by 5.08% per 1-mm increment of RBH; medullary spaces decreased by 9.02%, osteoid decreased by 4.4%, residual biomaterial decreased by 0.34%, and lamellar bone increased by 5.68% per 1-mm increase of RBH. In the NBS group, samples showed woven bone increases by 8.08% per 1-mm increase of RBH; medullary spaces decreased by 0.38%; osteoid increased by 1.34%, residual biomaterial decreased by 0.58%, and lamellar bone decreased by 5.50% per 1-mm increase of RBH. There was no statistically significant difference in the correlation between RBH and lamellar bone, woven bone, and osteoid, independently of the material used. Implant success was 100% in both groups, and marginal bone loss was 1.02 ± 0.42 mm in DBBM and 0.95 ± 0.31 mm in the NBS group after the 1-year follow-up.

CONCLUSION

In spite of the absence of significance, the observed trend for woven bone to increase and medullary spaces to decrease when RBH increases deserves attention. Residual bone dimension might be a determinant in the bone graft maturation after maxillary sinus augmentation.

Update on Maxillary Sinus Augmentation

Implant stability is critical to implant success, and the amount of available bone is vital to achieving that end. Because of low-lying maxillary sinuses, adequate alveolar height on the posterior maxilla is often lacking in many patients in need of implant replacement. This chapter reviews both the traditional lateral sinus lift maxillary approach to achieve vertical augmentation as well as the transcrestal osteotome intraoral approach. A discussion of osseodensification will also be mentioned as an alternative approach.

Core Ossification of Bone Morphogenetic Protein-2-Loaded Collagenated Bone Mineral in the Sinus

The objective of this study was to investigate in vitro release kinetics and ossification patterns of bone morphogenetic protein-2-soaked collagenated porcine bone mineral (BMP-2/CPBM) in rabbit sinuses. Release kinetics of BMP-2/CPBM was determined in vitro up to 56 days. In 16 rabbits, BMP-2/CPBM (BMP group) and CPBM alone (control group) were bilaterally grafted in both sinuses. After 4 (N = 8) and 12 (N = 8) weeks, radiographic and histologic analyses were performed. Approximately 40% of BMP-2 was released from CPBM during 3 days in vitro; release maintained at a reduced level until day 56. In vivo, new bone formation in BMP group was dominant at the center and decreased toward the borders of the sinus, while it mainly possessed close to the sinus membrane and basal bone in control group. At the center, significantly more new bone was found in BMP group compared to control group at 4 weeks (29.14% vs. 16.50%; p < 0.05). The total augmented volume of BMP group was significantly greater than control group at 4 (370.13 mm³ vs. 299.32 mm³) and 12 (400.40 mm³ vs. 290.10 mm³) weeks (p < 0.05). In conclusion, BMP-2/CPBM demonstrated a core ossification with a greater augmented volume and new bone formation in the center of the sinus compared to CPBM alone. Impact statement The center of the augmented maxillary sinus tends to show a slower and inferior new bone formation compared to the sites near the sinus membrane and basal bone. In this study, bone morphogenetic protein-2 (BMP-2) loaded onto collagenated porcine bone mineral (CPBM) resulted in a greater augmented volume and new bone formation at the center of the grafted sinus compared to CPBM alone. Therefore, BMP-2-added CPBM in maxillary sinus augmentation may potentially be beneficial to the clinicians, in terms of accelerating the new bone formation at the center area where the apical half of the implant fixture usually places.

Survival of Short and Ultra-Short Locking-Taper Implants Supporting Single Crowns in the Posterior Mandible: A 3-Year Retrospective Study

The purpose of this retrospective study was to determine survival and peri-implant marginal bone loss of short and ultra-short implants placed in the posterior mandible. A total of 98 patients received 201 locking-taper implants between January 2014 and January 2015. Implants were placed with a 2-stage approach and restored with single crowns. Clinical and radiographic examinations were performed at 3-year recall appointments. At that time, the proportion of implant survival by length, and variations of crestal bone levels (mean crestal bone loss and mean apical shift of the "first bone-to-implant contact point" position) were assessed. Significance level was set at 0.05. The total number of implants examined 36 months after loading included: 71 implants, 8.0 mm in length; 82 implants, 6.0 mm in length; and 48 implants, 5.0 mm in length. Five implants failed. The overall proportion of survival was 97.51%, with 98.59% for the 8.0-mm implants, 97.56% for the 6.0-mm implants, and 95.83% for the 5.0-mm implants. No statistically significant differences were found among the groups regarding implant survival (P = .73), mean crestal bone loss (P = .31), or mean apical shift of the "first bone-to-implant contact point" position (P = .36). Single-crown short and ultra-short implants may offer predictable outcomes in the atrophic posterior mandibular regions, though further investigations with longer follow-up evaluations are necessary to validate our results.

Functional Endoscopic Sinus Surgery for Paranasal Sinusitis Originating From a Peri-implantitis-Triggered Infection in the Augmented Maxilla: A Case Report

The aim of this case report was to report the course of treatment for advanced paranasal sinus infection triggered by peri-implantitis, managed using functional endoscopic sinus surgery (FESS), with outcomes. A nonsmoking male patient received sinus augmentation with implant placement on his left posterior maxilla 15 years ago. Possibly due to noncompliance to maintenance, peri-implantitis developed and progressed into the augmented bone area in the maxilla. Eventually, maxillary sinusitis occurred concomitantly with a spread of the infection to the other paranasal sinuses. Implant removal and intraoral debridement of inflammatory tissue were performed, but there was no resolution. Subsequently, FESS was performed, with removal of nasal polyp and sequestrum. After FESS, the patient's sinusitis resolved. Histologically, the sequestrum was composed of bone substitute particles, necrotic bone, stromal fibrosis, and a very limited cellular component. Two implants were placed on the present site, and no adverse event occurred for up to 1 year after the insertion of the final prosthesis. Peri-implantitis in the posterior maxilla can trigger maxillary sinusitis with concomitant infection to the neighboring paranasal sinuses. FESS should be considered to treat this condition.

Effect of amount of biomaterial used for maxillary sinus lift on volume maintenance of grafts

Background

Regardless of the kind of biomaterial used for the graft, it is clear that, over time, the graft undergoes dimensional changes that could influence the final bone volume obtained, which could alter the stability of the installed implants. The aim of the present study was to compared and correlated the graft behavior with the amount (in grams) of xenogeneic and alloplastic biomaterials used in grafts for maxillary sinus lift.

Material and Methods

This retrospective cohort study used 148 CBCT images of 74 grafts from 68 maxillary sinuses lift patients in a university, post-graduate clinic. The weights of biomaterials, categorized in intervals according to amount used, were correlated with the graft volumes at V1 (10 days) and V2 (180 days). Kruskal-Wallis test was used to evaluate the possible bias effect of weight on graft maintenance.

Results

Mean weights of biomaterials used were: Bio-Oss Small® (1.58g); Bio-Oss Large® (1.35g); Endobon® (0.72g); BoneCeramic®+Emdogaim® (0.96g); Cerasorb® (1.13g) and Osteogen® (2.70g). No significant differences (p>0.05). Were found for the influence of these mean amounts in graft maintenance: Bio-Oss Small® (18); Bio-Oss Large® (10); Endobon® (17); BoneCeramic®+Emdogaim® (10); Cerasorb® (11); and Osteogen® (08) at V1 and V2. However, when biomaterials were categorized by intervals, all Cerasorb® interval groups showed statistically significant differences (p<0.001) in graft volume at V2.

Conclusions

The amounts of the biomaterials used could influence the final volume; depending on the biomaterial characteristics. Implant installation was possible with all studied grafts, although graft volume shrinkage should be considered when selecting biomaterial for sinus lift.

Key words:Biocompatible materials; cone beam computed tomography; maxillary sinus; hydroxyapatites.

Distal Displacement of Maxillary Sinus Anterior Wall Versus Conventional Sinus Lift with Lateral Access: A 3-Year Retrospective Computerized Tomography Study

Background: The present study is designed to compare the outcomes of two sinus augmentation procedures: distal displacement of the anterior wall versus standard sinus lifting and grafting with a lateral window approach. Methods: In the displacement group, a localized surgical fracture of the sinus floor achieved through an electromagnetic device results in the distal displacement of the anterior wall. In the filling group, sinus lifting (with lateral access) and grafting with particulate xenogeneic bone substitute was performed. Bone volume beneath the maxillary sinus was investigated with computerized tomography after baseline and postoperative data superimposition. Clinical and radiological outcomes over three years had been evaluated. Results: Forty-three dental implants were selected. The two sinus lift procedures significantly increased the bone volume (p-value ≤ 0.0017) in the displacement group from 1.17 ± 0.34 to 1.53 ± 0.39 cc, with a final bone gain of +0.36 ± 0.17 cc, and in the filling group from 1.24 ± 0.41 to 1.94 ± 0.68 cc, with a bone augmentation of +0.71 ± 0.31 cc. No events of dental implant bulging into the maxillary sinus occurred. Two implants failed early on in the filling group, attesting the 3-year survival rate of 92.6% (CI95%: 82.7–100%). Marginal bone loss at the distal aspect was 1.66 ± 0.72 and 1.25 ± 0.78 mm, respectively, for the displacement and filling groups, with a significant difference (p-value = 0.0497). Conclusion: Results showed a significant and effective bone gain around dental implants at a 3-year survey for both sinus augmented by backward displacement of the anterior wall (+34%) and sinus lifting and grafting with a lateral window approach (+57%).

Osteogenic differentiation and inflammatory response of recombinant human bone morphogenetic protein-2 in human maxillary sinus membrane-derived cells

The aim of the present study was to investigate the osteogenic potential of human maxillary sinus membrane (hMSM)-derived cells, and the role of recombinant human bone morphogenetic protein-2 (rhBMP-2) in the inflammatory response of hMSM-derived cells and gingival fibroblasts following sinus floor elevation procedure (SFE). hMSM-derived cells from the samples were isolated, subcultured, and analyzed using immunohistochemical staining and flow cytometry. The hMSM-derived cells obtained from passage 6 were used for Alizarin Red staining and quantitative reverse transcription-quantitative PCR to observe its osteogenic activity and inflammatory reaction upon supplementation with rhBMP-2. The hMSM-derived cells were shown to be heterogeneous, as indicated by their positive expression of human mesenchymal stem cell markers (STRO-1, high mobility group AT-hook 2, CD44, CD105 and OCT-3/4), fibroblast cell marker (fibroblast-specific protein 1) and epithelial cell marker (epithelial cell adhesion molecule). Calcium nodules were found to be more notably evident in the rhBMP-2 group, following osteogenic differentiation. The gene expression of osteogenic markers was significantly upregulated in the cells supplemented with rhBMP-2. Supplementation with rhBMP-2 also enhanced the expression of inflammatory markers in hMSM-derived cells and gingival fibroblasts; however, NF-κB and TNF-α expression was not significantly increased compared with the control in the hMSM-derived cells. hMSM contains mesenchymal stem cells (MSCs) capable of differentiating into osteogenic cells. The supplementation of rhBMP-2 enhanced osteogenic differentiation and induced an inflammatory response which was greater in gingival fibroblasts compared with hMSM-derived cells. In summary, the hMSM is a potential contributor to the osteogenic process following SFE, and the use of rhBMP-2 may increase the inflammatory response accordingly. The gingival tissue may be responsible for the increased inflammatory response by rhBMP-2 and postoperative complications.

Implant placement with sinus floor elevation via the lateral approach using only absorbable collagen sponge: 12-month post-loading radiographical outcomes and implant survival rate

PURPOSE

The purpose of the present study was to evaluate the radiographical outcomes and survival rate of implants placed during graftless lateral sinus lift approach (GLSLA) using an absorbable collagen sponge.

MATERIALS AND METHODS

Fourteen patients (14 sinus augmentations) were consecutively treated with GLSLA. After Schneiderian membrane elevation and implant insertion, only collagen sponges were used to fill the new sinus compartment. After 4 months of healing, implants were functionally loaded. The radiographical marginal bone variation and apical bone gain were assessed on periapical radiographs taken 4 months after the surgery (at crown insertion) and at 12 months post-loading.

RESULTS

A total of 41 implants were placed in a mean initial residual bone height of 3.5 mm (range 1.6-6.7 mm). No failure was recorded and all the implants were successfully loaded with fixed prosthesis. Twelve months post-loading the mean radiographic bone remodeling was 2.22 mm. The mean ridge height was 8.4 mm and the mean apical bone gain amounted for 4.4 mm.

CONCLUSIONS

Within the limitations of this study, the placement of dental implants in conjunction with GLSLA using only a collagen sponge to fill the sinus compartment seems to be feasible and accompanied by a high implant survival rate. Further studies on a large population and with a longer follow-up are warranted to drawn definitive conclusions.

Three-dimensional visualization of the alveolar bone and posterior superior alveolar foramen in gender

The present study applied a three-dimensional (3D) program to measure the distances from the maxillary sinus floor (MSF) to the lingual and buccal alveolar bone and also to the posterior superior alveolar foramen (PSAF), with the aim of determining differences according to gender. The study also attempted to verify the accuracy of measurements obtained from 3D images by performing comparisons with the results obtained in a preliminary study. The results showed that the alveolar bone length and the MAF-PSAF were generally larger in males than in females. It is also predicted that the accuracy of data obtained from a 3D program will be higher than that of data derived from conventional two-dimensional (2D) images. The accurate measurements obtained in this study are anticipated to prove useful in assessments related to dental implantation and anatomical structures. The fundamental data obtained in this study may also assist in setting the goals of future studies utilizing 3D programs.

Clinical outcome of implants placed in grafted maxillary sinus via lateral approach: A 10-year follow-up study

Background/purpose

The maxillary sinus floor augmentation (MSFA) technique is frequently used for the preparation of implant sites in the maxillary region. The aim of this study was to investigate the 10-year outcome of dental implants placed in a grafted maxillary sinus, and identify possible risk factors for implant failure.

Materials and methods

We retrospectively analyzed 202 implants after MSFA in 97 patients from January 2008 to April 2009. The outcome variables were 1) 10-year cumulative survival rate of the implant, 2) risk factors for implant failure, and 3) correlation between preoperative residual bone height (RBH) and graft materials in terms of implant survival. Graft materials used were divided into five different groups: autogenic, allogenic, xenogenic, combination of allogenic and xenogenic, or combination of autogenic and xenogenic graft.

Results

The cumulative 10-year survival rate for the implants was 96.04%. In regions with a residual bone height of 5.0 mm and less, greater RBH was preferable for long-term implant survival (odds ratio = 3.475; p = 0.035). Implant survival was not significantly different with different graft materials, even when RBH was unfavorable.

Conclusion

The placement of dental implants with MSFA is a reliable procedure. Further, RBH is an important predictor of long-term implant survival.

Wire loop sinus membrane elevator: a novel instrument for lateral window sinus lift

This technical note introduces a novel instrument to facilitate lateral window sinus membrane elevation. The fabrication and use of the instrument are reported. The features of this instrument include easy control, good tactile sensation, flexibility in adjusting the instrument, and simple to replicate. Since its introduction, it has been the preferred instrument of our implant surgical trainees. Most importantly, it has proved to be an invaluable teaching tool, as it has helped not only to boost trainee confidence in the procedure, but also in their use of other sinus elevation instruments.

The effect of residual bone height and membrane thickness on sinus membrane perforation in crestal sinus grafting: A prospective clinical study

This study sought to determine the rate of sinus membrane perforation in patients undergoing crestal sinus grafting, as well as the effect of Schneiderian membrane thickness and residual bone height (RBH) on membrane perforation, using cone beam computed tomography. The study included 25 patients undergoing 44 crestal sinus grafting procedures. The sites for crestal sinus grafting were divided into a control group (RBH≥5mm) and a test group (RBH<5mm). All sinus grafting procedures were also categorised based on membrane thickness: group A (<1mm), group B (1-2mm), and group C (≥2mm). The rate of membrane perforation was 18.2%. The median RBH measurement was 5.59mm. No statistically significant difference in membrane perforation rate was found between the test and control groups (P=0.262). The median thickness of the Schneiderian membrane was 1.35mm. There was no statistically significant difference in membrane perforation among the three membrane thickness groups (P=0.431). No significant correlation between RBH and membrane perforation was observed, although clinical observation indicated that there was a tendency for an increased membrane perforation rate in the presence of a RBH<5mm. The perforation rate was found to be at its highest when the membrane was thinner than 1mm.

Important anatomical variations of the superior posterior alveolar artery: Studied by cone beam computed tomography

The knowledge of anatomical variations of the posterior superior alveolar artery (PSAA) is very important in surgeries for maxillary sinus (MS) elevation and subsequent insertion of dental implants, avoiding common and serious surgical complications. The main objective of this study was to analyse important anatomical variations of the PSAA by means of cone beam computed tomography (CBCT) examinations. 180 tomographic CBCT were analysed, and MS was divided into three equal regions: (I) anterior, (II) intermediate and (III) posterior. Variables evaluated were the visualisation of the artery, distance from the artery to the ridge crest, distance from the artery to the sinus floor, alveolar ridge height and arterial diameter. The PSAA visualisation was more prevalent in males and region III (76.7%). The distance from the artery to the sinus floor presented no significant difference between regions II and III, with both regions showing significantly lower values than region I. A significant difference was observed in the diameter of the arteries with higher prevalence of diameters >1.0 mm in males and <1.0 mm in females. The PSAA can be well visualised frequently with a CBCT, and differences in artery diameter were observed in relation to gender (males > females). Additional care is recommended when it is necessary to extend surgeries to the posterior MS region, avoiding haemorrhages that are associated with failures in these procedures.

Sequential healing of the elevated sinus floor with different size of antrostomy: a histomorphometric study in rabbits

PURPOSE

To study the influence of the access window dimensions on the healing at the antrostomy and within the augmented maxillary sinus.

MATERIAL AND METHODS

A maxillary sinus augmentation was performed in twenty-four albino New Zealand rabbits. Antrostomies of 3 × 6 mm (small) or 5 × 6 mm (large) in dimensions were randomly prepared in each animal. A collagenated cortico-cancellous porcine bone was used to fill the elevated region, and an equine collagen membrane was placed on the antrostomies. Three different groups were formed, based on the time of euthanasia, i.e., 2, 4, and 8 weeks from surgery.

RESULTS

No relevant changes of the height of the augmented sinus were detected over time. Mineralized bone increased between 2 and 4 weeks of healing while remained stable between 4 and 8 weeks. The highest amounts of new bone were found close to the sinus bone walls. No antrostomies were found healed with an even layer of corticalized bone, while large amounts of connective tissue were occupying the antrostomy in both groups.

CONCLUSION

Antrostomies of different dimensions resulted in similar outcome in bone formation both in the antrostomy regions and within the elevated sinus.

Short implants versus longer implants in the posterior alveolar region after an observation period of at least five years: A systematic review and meta-analysis

OBJECTIVES

This meta-analysis compared clinical outcomes, including survival rate, marginal bone loss (MBL), and technical and biological complications of short implants (<7 mm) and long implants (≥7 mm) placed in the posterior alveolar bone.

SOURCES

Electronic (via PubMed, EMBASE, Cochrane Library) and manual searches were performed for articles published prior to November 29, 2019.

STUDY SELECTION

The review protocol was registered with PROSPERO (CRD42019140718). Only randomized controlled trials (RCTs) comparing short implants and standard implants in the same study after an observation period of at least five years were included.

DATA

Nine RCTs were included in this study. The survival rates of short implants (<7 mm) ranged from 86.7 %-98.5 %, whereas the survival rates of longer implants (≥7 mm) were 95.1%-100% with follow-up ranging from 5 to 10 years. Dichotomous variables were compared using the Mantel-Haenszel (MH) method, and continuous variables were compared using the inverse variance (IV) method. The random effects model and the fixed effects model were used. Meta-analyses showed that short implants had a poorer survival rate than longer implants (P = 0.008). Short implants were associated with lower MBL than longer implants (P < 0.001). The biological complications of short implants were lower (P < 0.001) and the technical complications were higher, than those of long implants (P = 0.006).

CONCLUSIONS

The results indicate that although the survival rate of short implants in the maxilla may be lower than that of long implants, the survival rate of short implants in the mandible is similar to that of long implants, and short implants can result in a lower rate of biological complications. The conclusions should be interpreted with caution due to the limited numbers of participants and implants.

CLINICAL SIGNIFICANCE

When selecting the length of implants, surgeons should consider survival rate, the location of implant placement, their own clinical experience, and the incidence of complications.

Guided Lateral Sinus Lift Procedure Using 3-Dimensionally Printed Templates for a Safe Surgical Approach: A Proof-of-Concept Case Report

The purpose of this article was to present a guided lateral window sinus lift procedure with the aid of a fully digital workflow using surgical templates for window osteotomy preparation and implant placement. A 22-year-old patient with insufficient residual bone height in the posterior maxilla was treated with a maxillary sinus augmentation procedure with a lateral window technique and simultaneous implant installation using 3-dimensionally printed surgical guides. The surgical guides, used for the preparation of both the lateral window and the implant site according to the optimal prosthodontic and anatomic position, were based on a fully digital workflow and virtual pre-planning with modified implant-planning software. Successful functional and esthetic rehabilitation of the patient was accomplished using standard surgical techniques and instruments but an innovative method for the production and application of surgical templates ensured a precise and safe approach for the lateral window osteotomy preparation. This guided lateral window sinus lift technique may reduce the incidence of surgical complications and failures and enhance patient-related outcomes.

Influence of the position of the antrostomy in sinus floor elevation on the healing of mini-implants: a randomized clinical trial

AIM

To evaluate histologically the healing of mini-implants installed after sinus floor elevation using a lateral approach and placing the antrostomy at different level from the sinus floor.

MATERIAL AND METHODS

Sinus floor elevation using a lateral approach was performed in 24 healthy volunteers. The antrostomy was randomly placed either close to the base of the sinus floor (group base) or at about 3-4 mm cranially to it (group standard). After 6 months of healing, mini-implants were installed within the grafted region, through the alveolar crest. Three months later, biopsies were collected.

RESULTS

Sixteen biopsies from 16 patients were available for histological analyses. The new bone reached fractions of 40.9 ± 11.9% and 48.5 ± 20.1% at the base and standard groups, respectively (p = 0.208). Xenograft particles were found in contact with the implant surface at percentages of 12.1 ± 11.0% in the base group, and 15.9 ± 23.7% in the standard group (p = 0.674).

CONCLUSIONS

Based on the present study, the choice of one or the other position of antrostomy did not influence significantly the outcome and, therefore, should be left to the preference of the surgeon.

Effects of Platelet-Rich Fibrin on Hard Tissue Healing: A Histomorphometric Crossover Trial in Sheep

Bone defects lead to aesthetic and functional losses, causing dental rehabilitation to be more difficult. The objective of this work is to histologically assess the hard tissue healing of bone defects filled with platelet-rich fibrin (PRF) alone or as an adjuvant for mixing with and covering anorganic bovine bone (ABB), compared to ABB covered with a resorbable collagen membrane (CM). This study was designed as a crossover animal study. Four 5-mm tibia defects, 5 mm apart from each other, were surgically created on the tibias of 6 sheep. The defects were randomly filled with ABB + CM; PRF alone; ABB+PRF; or were left empty. The animals were euthanized on days 10, 20, and 40 post-operatively. No group showed any signs of bone necrosis. Inflammation was observed in 2 control and 3 test defects with no statistically significant difference between groups at each time point. The ABB + CM and ABB + PRF groups experienced the highest bone regeneration ratios. No differences between the empty-defect and PRF groups were observed in regard to bone regeneration. No statistical difference was observed between the ABB+PRF and ABB + CM groups in regard to bone regeneration and the amount of residual graft material at each time point. The use of PRF should be preferred due to its autogenous origin, low cost, and ease of use.

The effect of transcrestal sinus-floor elevation without graft on the long-term prognosis of maxillary implants

AIM

To evaluate the effects of (a) transcrestal sinus-floor elevation (TSFE) and (b) residual bone height on long-term implant survival.

MATERIALS AND METHODS

Chi-squared and t tests were used for descriptive comparison of the groups. Kaplan-Meier survival curves and corresponding log-rank tests were used to investigate implant survival over time. Multivariable Cox regressions were performed for the total population and experimental group.

RESULTS

A total of 634 patients received 648 implants with TSFE, while 674 implants without TSFE served as controls. Thirty implant failures occurred in the experimental group and 28 in the control group. Ten-year Kaplan-Meier survival curves for the 157 implants (24.3%) still under observation showed a probability of survival of 93.7% for the implants with TSFE and 92.9% for the 72 implants without TSFE (p = .678). The probability of 10-year survival of all implants in the experimental group decreased to 77.4% for implants placed in residual bone heights of 1-3 mm, compared with 95.7% for implant sites with bone heights of 4-6 mm and 97.6% for bone heights of >6 mm.

CONCLUSIONS

Transcrestal sinus-floor elevation has no negative effect on the long-term implant survival. Membrane perforation or negligible bone height, however, reduces the probability of 10-year survival.

Bone plate repositioned over the antrostomy after sinus floor elevation: an experimental study in sheep

The objective of this study was to compare the healing of the augmented sinus at which the antrostomy was covered with a membrane or the repositioned bone plate.Eight sheep underwent bilateral maxillary sinus floor augmentation. The control site was covered with a resorbable membrane, while at the experimental site the bone plate was repositioned, and both were secured with cyanoacrylate. Animals were euthanised after 4 months and histomorphometric analysis was performed.A large amount of the graft appeared to be partially interpenetrated by the newly formed bone. Statistical analysis demonstrated different percentages of the new bone and bone interpenetrated to the graft between test and control site in the close-to-window area respectively 22.1 ± 12.6 vs 7.5 ± 4.5 (P = 0.028) and 66.1 ± 14.7 vs 44.2 ± 15.1 (P = 0.046). Other areas showed no difference in the bone and graft amount. More bone was found at the edges of the antrostomy in the experimental site, without statistical significance. In the centre of the antrostomy, the replaced bony window appeared bonded to the newly formed bone. No remnants and no biological response to cyanoacrylate were observed.The repositioning of the bony window after sinus floor elevation in sheep led to a larger amount of newly formed bone in the close-to-window zone of the grafted area. The bony window appeared partially bonded to the new bone. Newly formed bone was found interpenetrating the graft granules.

Volume stability of the augmented sinus using a collagenated bovine bone mineral grafted in case of a perforated Schneiderian membrane: An experimental study in rabbits

OBJECTIVES

To determine the volume stability of a sinus augmented with a collagenated bovine bone mineral (CBBM) in case of an intact or perforated Schneiderian membrane (SM).

MATERIALS AND METHODS

A bilateral sinus augmentation procedure was performed in eight rabbits. The SM was intentionally perforated in one side (SMP group), while it remained intact in contra-lateral side (control group) and the same amount of CBBM was then grafted. At 12 weeks, the animals were euthanized for radiographic and histomorphometric analyses.

RESULTS

The augmented volume did not differ significantly between the two groups: 262.2 ± 32.1 mm³ in SMP group and 261.9 ± 48.5 mm³ in the control group (p = .959). There was no significant difference in the total augmented area: 24.7 ± 5.2 mm² in SMP group and 23.2 ± 2.9 mm² in the control group (p = .773). The areas of newly formed bone also did not differ significantly between the two groups, but was significantly lower at the centre of the augmented region than in the region of the surgical window in both groups (p < .05).

CONCLUSION

A perforation of the SM in a rabbit model does neither impact the augmented volume nor new bone formation following grafting of the sinus with a CBBM.