Quantification of a Professional Football Team's External Load Using a Microcycle Structure

Global Positioning System Analysis of Physical Demands in Small and Large-Sided Games with Floaters and Official Matches in the Process of Return to Play in High Level Soccer Players

The aim of this study was twofold: (i) to analyze the physical demands in the return to play (RTP) process of high-level soccer players in the role of floater in different soccer sided games (SGs) formats (i.e., 4vs4 + 2 and 8vs8 + 1); and (ii) to analyze the differences in physical demands encountered by regular and floater players among the SGs formats and official matches by means of global positioning system technology (GPS APEX pod, North Ireland) was used. Twenty-six highly trained, male soccer players (U16 years) participated in this investigation. Players were classified into two groups: 23 regular and 3 floater players, a total of eight SGs were analyzed, which involved the recording of 80 observations of regular and floater players. Match-play players showed most likely-probable differences in distance covered at high-intensity per minute (D > 14.4/min), at high-speed running per minute (D > 21/min), and peak velocity (Vpeak) in comparison to floaters in the 8vs8 + 1 LSG (large-side-games), and presented most likely differences in accelerations >2/min in comparison to match-play players. Therefore, the use of floaters during the last phase of the RTP (return to play) seems to be a useful strategy for progressive reintroduction into specific training (1) floater in the 4vs4 + 2 SSG; (2) floater in the 8vs8 + 1 LSG; (3) regular player in the 4vs4 + 2 SSG; and (4) regular player in the 8vs8 + 1 LSG before starting full trainings and returning to competition.

Quantification of an Elite Futsal Team's Microcycle External Load by Using the Repetition of High and Very High Demanding Scenarios

The main objective of this study was to describe the repetition of external load high-demanding scenarios and very high-demanding scenarios of match play for velocity, distance, and neuromuscular locomotor variables of an elite futsal team. Additionally, we also checked how these high- and very high-demanding scenarios were distributed throughout the microcycle. The most demanding scenario (measured using a rolling average method with a 1-min time window) of match play was measured out of thirteen elite futsal players using a local positioning system in the course of thirteen official matches and six in-season microcycles. A mean of the top three match play observations for each variable and each player were used to determine the most demanding scenario (100%) reference value. Data were reanalyzed to count the number of high-demanding scenarios (80-90% of the individual most demanding scenario) and very high-demanding scenarios (>90% of the individual most demanding scenario). The number of scenarios was analyzed with respect to the number of days prior to the match [match day (MD) minus X] and a bootstrap confidence interval approach was used to assess differences between MD. During a single match, players have to cope with repeated high- and very high-demanding scenarios. Moreover, the training session 2 days prior to the match was the one most similar to the match, surpassing it only in scenarios of locomotor velocity variables, albeit with significantly fewer scenarios of neuromuscular variables. The number of high- and very high-demanding scenarios in the training session prior to the match dropped significantly in comparison with the rest of the microcycle and the match. This new monitoring method may help practitioners to establish an accurate assessment of external load demands in competition and training.

Area per player in small-sided games to replicate the external load and estimated physiological match demands in elite soccer players

The current study determined the area-per-player during small- or large-sided games with or without goalkeeper that replicates the relative (m·min^-1) total distance, high-intensity running distance, sprint distance and metabolic power covered during official matches. Time-motion analysis was performed on twenty-five elite soccer-players during 26 home-matches. A total of 2565 individual samples for SSGs using different pitch sizes and different number of players were collected and classified as SSGs with (SSG-G) or without goalkeeper (SSG-P). A between-position comparison was also performed. The area-per-player needed to replicate the official match demands was largely higher in SSG-G vs SSG-P for total distance [187±53 vs 115±35 m², effect size (ES): 1.60 95%CI 0.94/2.21], high-intensity running distance [262±72 vs 166±39 m², ES: 1.66(0.99/2.27)] and metabolic power [177±42 vs 94±40, ES: 1.99(1.31/2.67)], but similar for sprint distance [(316±75 vs 295±99 m², ES: 0.24(-0.32/0.79)] with direction of larger area-per-player for sprint distance > high-intensity running > total distance ≌ metabolic power for both SSG-G and SSG-P. In SSG-G, forwards required higher area-per-player than central-defenders [ES: 2.96(1.07/4.35)], wide-midfielders [ES: 2.45(0.64/3.78)] and wide-defenders [ES: 3.45(1.13/4.99)]. Central-midfielders required higher area-per-player than central-defenders [ES: 1.69(0.20/2.90)] and wide-midfielders [ES: 1.35(-0.13/2.57)]. In SSG-P, central defenders need lower area-per-player (ES: -6.01/-0.92) to overall replicate the match demands compared to all other positions. The current results may be used to gain knowledge of the SSGs relative to the match demands. This imply manipulating SSGs using higher or lower ApP, the presence of the goalkeeper or design specific rules to increase or decrease the position-specific demands with respect to the desired external load outcomes.

Changes in markers of body composition of professional male soccer players during pre-season

To evaluate changes achieved in whole-body and regional (upper limbs, lower limbs, and trunk) estimates of body composition, twenty professional male soccer players (7 defenders, 7 midfielders, 6 forwards) underwent dual-energy x-ray absorptiometry (DXA) analysis at the beginning and end of pre-season. Measures included: mass, fat mass (FM), fat-free mass (FFM), and body fat per cent (BF%). Players' activity during on-field training sessions was monitored using Global Positioning System (GPS) units, with GPS data used to obtain estimations of energy expenditure (EE). Whole-body mass remained unchanged across the pre-season. Moderate significant increases and decreases were achieved in whole-body FFM (Pre: 59.58 ± 5.27 kg; Post: 60.61 ± 5.18 kg; p = 0.001; d = 0.87) and FM (Pre: 10.60 ± 1.88 kg; Post: 9.56 ± 1.81 kg; p = 0.001; d = 0.85), respectively. Moderate significant decreases were achieved in whole-body BF% (Pre: 14.4 ± 2.3%; Post: 12.9 ± 2.0%; p < 0.001; d = 0.94). No significant inter-positional differences were observed for the changes achieved in any global or regional estimate of body composition. Total EE was significantly correlated with ΔFM (r = 0.65, p = 0.002), ΔFFM (r = 0.46, p = 0.03), and ΔBF% (r = 0.67, p = 0.002). The total EE of pre-season training accounted for 42%, 21%, and 45% of the variance in ΔFM, ΔFFM, and ΔBF%, respectively. These findings suggest that the pre-season period is a suitable time for initiating favourable alterations in body composition following the off-season in elite soccer players.

Accelerometry as a method for external workload monitoring in invasion team sports. A systematic review

Accelerometry is a recent method used to quantify workload in team sports. A rapidly increasing number of studies supports the practical implementation of accelerometry monitoring to regulate and optimize training schemes. Therefore, the purposes of this study were: (1) to reflect the current state of knowledge about accelerometry as a method of workload monitoring in invasion team sports according to the Preferred Reporting Items for Systematic Reviews and Meta-analyses (PRISMA) guidelines, and (2) to conclude recommendations for application and scientific investigations. The Web of Science, PubMed and Scopus databases were searched for relevant published studies according to the following keywords: "accelerometry" or "accelerometer" or "microtechnology" or "inertial devices", and "load" or "workload", and "sport". Of the 1383 studies initially identified, 118 were selected for a full review. The main results indicate that the most frequent findings were (i) devices' body location: scapulae; (b) devices brand: Catapult Sports; (iii) variables: PlayerLoadTM and its variations; (iv) sports: rugby, Australian football, soccer and basketball; (v) sex: male; (vi) competition level: professional and elite; and (vii) context: separate training or competition. A great number of variables and devices from various companies make the comparability between findings difficult; unification is required. Although the most common location is at scapulae because of its optimal signal reception for time-motion analysis, new methods for multi-location skills and locomotion assessment without losing tracking accuracy should be developed.

Effects of Match-Related Contextual Factors on Weekly Load Responses in Professional Brazilian Soccer Players

This study aimed to quantify the weekly training load distributions according to match location, opponent standard, and match outcome in professional soccer players. Rate-of-perceived-exertion-based training load (sRPE) and distance- and accelerometry-based measures were monitored daily during 52 training sessions and 11 matches performed by 23 players. Athletes who played ≥ 60 min during non-congested weeks were considered for data analysis. The training days close to away matches (e.g., one day before the match = MD-1) presented greater sRPE, distance-based volume measures, and mechanical work (player load) compared to the training days close to home matches (p = 0.001-0.002; effect size (ES) = medium-large). The most distant days of the home matches (e.g., five days before the match = MD-5) presented higher internal and external loads than before away matches (p = 0.002-0.003, ES = medium). Higher sRPE, distance-based volume measures, and mechanical work were found during the middle of the week (e.g., three days before the match, MD-3) before playing against bottom vs. medium-ranking teams (p = 0.001-0.01, ES = small-medium). These metrics were lower in MD-5 before matches against bottom vs. medium-ranking opponents (p = 0.001, ES = medium). Higher values of all external load measures were observed during the training session before winning matches (MD-1) compared to a draw or loss (p < 0.001-0.001, ES = medium-large). In conclusion, the training load distribution throughout the week varied considerably according to match-contextual factors.

Player Monitoring in Professional Soccer: Spikes in Acute:Chronic Workload Are Dissociated From Injury Occurrence

This study aimed to determine whether spikes in acute:chronic workload ratio (ACWR) are associated with injury incidence, and to examine the differences in external load due to greater or lesser exposure to matches and the long-term effects of the load during a chronic seasonal period. Fifteen professional soccer players belonging to the squad of a European Champions League club were enrolled in this study. External training and match load were assessed from all athletes using a global positioning system (GPS). We calculated the uncoupled ACWR for 10 consecutive competitive microcycles. Injuries were identified and determined by the days of absence. The differences in external load were determined using a linear mixed-model approach. In addition to the null hypothesis testing, the effect size was calculated. Thirteen athletes who did not suffer an injury exceeded several times the critical threshold of an ACWR > 1.5. This is equivalent to 1 player exceeding the critical threshold for ACWR in total distance (TD), 2 players for ACWR at distance covered above moderate speed (MSD), 2 players for ACWR at distance covered above high speed (HSD), 2 players for ACWR at distance covered above very high speed (VHSD), and 2 players for ACWR in DC at sprint per week. One athlete experienced a non-contact muscle strain injury and another a contact -injury manifested as a concussion; both athletes document an ACWR <1.5 within the 4 weeks prior to the injury event. Players with lesser participation in official games covered lower TD (-19.6%, very-large ES), MSD (-24.8%, very-large ES), HSD (-25.1%, moderate ES), VHSD (-25.5%, moderate ES), and DC at sprint (-30.6%, moderate ES) over the course of the 10-weeks period in comparison with the players with greater participation in official games. The present study demonstrated that spikes in the ACWR were not related to a subsequent injury occurrence in professional soccer players. Differences in participation in official games caused significant imbalances in the chronic external loads between players in a squad, which should be minimized in training sessions in order to prevent substantial changes in workload for those who usually do not play.

Prior workload has moderate effects on high-intensity match performance in elite-level professional football players when controlling for situational and contextual variables

This investigation examined the effect of prior workload on high-intensity football match performance. Player load variables were recorded using a global positioning system and converted into composite variables: rolling season accumulated load (AL), exponentially weighted moving average acute, chronic and acute:chronic workload ratio (A:C). Match-play high-intensity performance-per-minute: accelerations (ACC), sprints, high-speed running (HSR) and high metabolic load (HMLd) distances; and situational and contextual variables were recorded for all games. Partial least squares modelling, and backward stepwise selection determined the most parsimonious model for each performance variable. Quadratic relationships of small to moderate effect sizes were identified for sprint AL and sprint performance, HSR AL and HSR performance, acute HMLd and HMLd performance, acute sprint load and ACC performance and A:C sprint load and ACC performance. Match performance was typically greatest between the mean and +1SD. High chronic HMLd, and combined acceleration and deceleration (ACC+DEC) load exerted small beneficial effects on HMLd and HSR performance, whereas high acute load exerted trivial to moderate negative effects. High sprint A:C exerted a small beneficial effect on sprint performance and playing position exerted small effects on HSR and HMLd performance. Prior workload has trivial to moderate effects on high-intensity match performance in professional players.

Physical and Physiological Responses of U-14, U-16, and U-18 Soccer Players on Different Small-Sided Games

As most existing studies in youth academies are focused on top players, the objective of this research is to analyze the physical and physiological demands of various small-sided games (SSGs) on different age categories within a sub-elite soccer academy. We evaluated 63 young players from a Spanish sub-elite academy (under 14 = 21; under 16 = 21; under 18 = 21). Players performed four different small-side games focused on possession game (3-a-side; 4-a-side; 5-a-side; 6-a-side). The global indicators of performance and high-intensity actions were recorded through global positioning systems, whereas the heart rate responses were measured using heart rate monitors. Results: Under 16 ran a greater distance at high-intensity velocity than under 14 in the small side games 3v3 and 6v6. Furthermore, under 16 also ran a greater distance at high-intensity velocity than under 18 in the small side game 3v3 (p < 0.01). Under 14 showed greater acceleration at the highest intensity (> 2.75 m/s2) than the other age groups, under 16 and U18 (p < 0.01; ES (effect size) > 1). According to the physiological load, SSG 3v3 presented lower outcomes in Zone 6 (> 95% HRmax) than the small side game 4v4 and the small side game 5v5, in both under 14 and under 16. The workload of SSGs varies depending on the number of players, but also depending on the players' ages. Therefore, when designing the SSGs it is important to consider both the players' ages and the workload that want to be achieved.

A Longitudinal Investigation of Muscle Injuries in an Elite Spanish Male Academy Soccer Club: A Hamstring Injuries Approach

The aims of this study were to analyze the muscle injury incidence in an elite Spanish soccer academy during three consecutive seasons attending to different chronological age groups (i.e., U14, U16, U19 and senior) and to examine the hamstring injury incidence in this elite soccer academy. Elite male youth soccer players (227) participated in this study. A total of 207 time-loss injuries (i.e., injuries that involve at least one absence day) were observed during this study period. The overall incidence rate of muscle injury was 1.74 muscle injuries/1000 h. In addition, higher muscle injury incidence was observed during match play in comparison to training sessions (6.78 vs. 3.20 muscle injuries/1000 h, p < 0.05). The oldest age group presented the highest injury rate (2.73 muscle injuries/1000 h, p < 0.05), with the burden (i.e., number of absence days per 1000 h of exposure) peak values recorded in the U16 age group (26.45 absence days/1000 h). In addition, muscle tears accounted for the greatest percentage of muscle injuries (43.5%), and the most frequent anatomical site of injury was the hamstring (30.4%). Muscle tear was the most common type of hamstring injury (49.2%), with the biceps femoris the most commonly injured muscle of the hamstring complex (39.7%). Fullbacks (FB), wide midfielders (WM) and forwards (F) suffered a greater number of hamstring injuries. Hamstring injury incidence showed a seasonal variation, as indicated by peaks in August and October. Specifically, the highest injury incidence was observed in the final part of each period during match play. These results reinforce the necessity to implement individual preventive strategies according to each specific injury profile across the youth soccer development phase.

Positional Differences in Peak- and Accumulated- Training Load Relative to Match Load in Elite Football

Quantification of training and match load is an important method to personalize the training stimulus' prescription to players according to their match demands. The present study used time-motion analysis and triaxial-accelerometer to quantify and compare: a) The most demanding passages of play in training sessions and matches (5-min peaks); b) and the accumulated load of typical microcycles and official matches, by playing position. Players performance data in 15 official home matches and 11 in-season microcycles were collected for analysis. Players were divided into four different playing positions: Centre-backs, wing-backs, centre midfielders, and centre forwards. The results show that match demands were overperformed for acceleration counts (acc_counts) (131%-166%) and deceleration counts (dec_counts) (108%-134%), by all positions. However, relative to match values, training values for sprint distance (sprint_dist) and high-intensity run distance (HIR_dist) were considerably lower (36%-61% and 57%-71%) than for accelerations and decelerations. The most pronounced difference on the 5-min peaks was observed in sprints (sprint_peak), with wing-backs achieving during the microcycle only 64% of the sprint_peak in matches, while centre backs, centre midfielders, and centre forwards levelled and overperformed the match values (107%, 100%, and 107%, respectively). Differences observed across playing positions in matches and microcycles underline the lack of position specificity of common training drills/sessions adopted by coaches in elite football.

Workload efficiency as a new tool to describe external and internal competitive match load of a professional soccer team: A descriptive study on the relationship between pre-game training loads and relative match load

The current study introduces a new index for external and internal workload, "workload efficiency", and assesses in professional soccer the influence of pre-match training load on match workload efficiency. External and internal workloads were determined for 44 training sessions and 16 competitive matches using a 10-Hz global positioning system (GPS) and a 200 Hz accelerometer/heart rate monitor. Training loads were registered from day five (D-5) to day one (D-1) prior to each competitive match. Workload efficiency was calculated for each match as the ratio between overall external and internal load. A multiple stepwise regression analysis (including z-transformed variables) was used to determine training load variables that predict workload efficiency of the following matches. Training load variables of the previous days explained 26.6% of the variance in workload efficiency during the following matches. Long sprinting distance on D-3 and D-4 and total distance on D-1 positively influenced the players' workload efficiency, whereas long training durations and high training load on D-1 showed adverse effects. The present outcomes suggest that including sprint training (high sprinting distance) four and three days prior to a match, may provide a positive stimulus for the subsequent workload efficiency in matches. The negative impact of long training duration and high training load one day before the game highlights the importance of a diligent planning of the immediate competition preparation phase. This study shows that workload efficiency is a useful metric to assess match performance and that body-worn sensor technology can be useful for tailoring training loads.

Methods to collect and interpret external training load using microtechnology incorporating GPS in professional football: a systematic review

The aim of this article was to systematically review the methods adopted to collect and interpret external training load (ETL) using microtechnology incorporating global positioning system (GPS). The main deficiencies identified concerned the non-collection of match ETL, and the non-consideration of potential confounders (e.g. playing position, fitness level, starting status or session content). Also, complementary training (individual/reconditioning) and pre-match warm-up were rarely quantified. To provide a full picture of the training demands, ETL was commonly complemented by internal training load monitoring with the rating of perceived exertion predominantly adopted instead of heart rate recordings. Continuous data collection and interpretation of ETL data in professional football vary widely between observational studies, possibly reflecting the actual procedures adopted in practical settings. Evidence about continuous ETL monitoring in female players, and female as well as male goalkeepers is lacking.

Internal training load monitoring in professional football: a systematic review of methods using rating of perceived exertion

INTRODUCTION

The rate of perceived exertion (RPE) is widely adopted to quantify internal training load (ITL) in professional football. The aim of this study was to systematically review the use RPE-based methods in professional football.

EVIDENCE ACQUISITION

Observational studies conducted during training routines of professional football players over a minimum of one-week were selected based on the preferred reporting items for systematic reviews and meta-analyses statement.

EVIDENCE SYNTHESIS

Thirty-eight articles met the inclusion criteria (average qualitative score was 6.3 out of 10 [3 to 9]). The main deficiencies identified concerned the poor description of study design (~52% of the studies), and the non-quantification of match load (~44%). Ten studies complemented RPE-based ITL information with time-motion analysis (~26%) and seven studies added HR recordings (~18%). Nine studies collected RPE data after complementary training, separately to field sessions (~3%). Operational questions (e.g. How was your workout? ~71%) were preferred to instructions (e.g. Please rate the intensity of today's session; ~8%). Session-RPE (s-RPE; RPE multiplied by training duration) was more commonly adopted as measure of exercise intensity than isolated RPE (~76 vs. ~8%). RPE-derived variables calculated on weekly values included absolute week-to-week change, acute: chronic workload ratio, monotony and strain and were not frequently used (7 to 15%). Four studies (~11%) divided RPE in two components: respiratory and muscular.

CONCLUSIONS

There is a lack of consensus for the use of RPE in professional football and "good practices" are warranted. This review might help practitioners regarding procedures to adopt in RPE data collection and interpretation.

Extracting spatial-temporal features that describe a team match demands when considering the effects of the quality of opposition in elite football

Spatiotemporal patterns of play can be extracted from competitive environments to design representative training tasks and underlying processes that sustain performance outcomes. To support this statement, the aims of this study were: (i) describe the collective behavioural patterns that relies upon the use of player positioning in interaction with teammates, opponents and ball positioning; (ii) and define the underlying structure among the variables through application of a factorial analysis. The sample comprised a total of 1,413 ball possession sequences, obtained from twelve elite football matches from one team (the team ended the season in the top-5 position). The dynamic position of the players (from both competing teams), as well as the ball, were captured and transformed to two-dimensional coordinates. Data included the ball possession sequences from six matches played against top opponents (TOP, the three teams classified in the first 3 places at the end of the season) and six matches against bottom opponents (BOTTOM, the three teams classified in the last 3 at the end of the season). The variables calculated for each ball possession were the following: ball position; team space in possession; game space (comprising the outfield players of both teams); position and space at the end of ball possession. Statistical comparisons were carried with magnitude-based decisions and null-hypothesis analysis and factor analysis to define the underlying structure among variables according to the considered contexts. Results showed that playing against TOP opponents, there was ~38 meters game length per ~43 meters game width with 12% of coefficient of variation (%). Ball possessions lasted for ~28 seconds and tended to end at ~83m of pitch length. Against BOTTOM opponents, a decrease in the game length with an increase in game width and in the deepest location was observed in comparison with playing against TOP opponents. The duration of ball possession increased considerable (~37 seconds), and the ball speed entropy was higher, suggesting lower levels of regularity in comparison with TOP opponents. The BOTTOM teams revealed a small EPS. The Principal Component Analysis showed a strong association of the ball speed, entropy of the ball speed and the coefficient of variation (%) of the ball speed. The EPS of the team in possession was well correlated with the game space, especially the game width facing TOP opponents. Against BOTTOM opponents, there was a strong association of ball possession duration, game width, distance covered by the ball, and length/width ratio of the ball movement. The overall approach carried out in this study may serve as the starting point to elaborate normative models of positioning behaviours measures to support the coaches’ operating decisions.

Are acceleration and cardiovascular capacities related to perceived load in professional soccer players?

This study aims at assessing physical fitness performance and its relationship with the differential ratings of perceived exertion of training load (dRPE TL) and match load (dRPE ML) in a Spanish professional soccer team at the beginning of several in-season periods: 1-4 weeks, 5-8 weeks and 1-8 weeks. Performance and mechanical variables over the acceleration phase, as well as cardiovascular performance variables were evaluated in 20 male professional soccer players of a team competing in the Spanish Second Division League. Moreover, dRPE TL and dRPE ML were quantified. The dRPE TL showed negative and large associations between both maximal aerobic speed (MAS) and maximal oxygen consumption (VO_2max) (from r = -0.53; ± 0.06 to r = -0.53; ± 0.05 95% CL, p = 0.035 to 0.036) and RPEres TL values throughout the 5-8 and 1-8 week periods. Furthermore, dRPE ML positive and large associations were found between players initial MAS or VO_2max (from r = 0.50; ± 0.17 to r = 0.56; ± 0.11 95% CL, p = 0.026 to 0.049) and RPEmus ML in 1-4 and 1-8 week periods. The current study suggests that a better cardiovascular capacity could be connected with a lower RPEres TL and higher RPEmus ML.

Positional demands for various-sided games with goalkeepers according to the most demanding passages of match play in football

The main aim was to determine the differences between four training games and competitive matches (CM) according to position and compared to the most demanding passages (MDP) of competitive match play. Global Positioning System data were obtained from 21 football players belonging to the reserve squad of a Spanish La Liga club during the 2015/16 season. The training games were small-sided games (SSGs) with 5 and 6 and large-sided games with 9 and 10 outfield players per team. The players were categorized based on positional groups: full back (FB), central defender (CD), midfielder (MF), offensive midfielder (OMF), and forward (FW). The variables recorded were the distance covered (DIS), DIS at high speed (HSR; >19.8 km·h-1), DIS at sprint (SPR; >25.2 km·h-1), high metabolic load distance (HMLD; >25.5 W·kg-1) all in m·min-1, average metabolic power (AMP; W·kg-1) and number of high-intensity accelerations (ACC; >3 m·s-2) and decelerations (DEC; <-3 m·s-2), both in n·min-1. The MDP was analysed using a rolling average method for AMP as a criterion variable, where maximal values were calculated for time windows of 5 and 10 minutes of CM and after that compared with the training game formats. As the SSG format increases, all the rest of the variables increase and the number of cases with significant interposition differences also increases (effect size [ES]: DIS: 0.7-2.2; HSR: 0.7-2.1; SPR: 0.8-1.4; HMLD: 0.9-2.0; AMP: 0.8-1.9; ACC: 0.8-1.7; DEC: 0.5-1.7). The large-sided game 10v10 + 2 goalkeepers over-stimulates sprint values relative to MDP (all: 121.0% of MDP, ES=0.5-1.8). This study provides useful information for coaching staff on the heightened impact of different training game formats on physical load, considering positional differences in relation to the MDP of competitive match play.

Effects of the pitch configuration design on players' physical performance and movement behaviour during soccer small-sided games

This study aimed to identify the effects of different pitch configurations on youth players positional and physical performances. Forty players participated in a Gk + 5vs5 + Gk small-sided game under four conditions: regular condition (regular), pitch with the direction of competitive matches; sided condition (sided), goals were changed to width; different pitch orientation (≠orientation), performed in side-to-side line compared to competitive matches; dynamic pitch (dynamic), boundaries were randomly changed every minute by: regular pitch; decrease 6 m width; diamond shape. The following variables were considered: players' effective playing space, distance between teammates' dyads time spent synchronized, average speed and a ratio between the distance covered at different intensities and distance covered while recovering. Overall, players exhibited better performances in pitches that are more representative of the environmental information seen during competitive matches (regular and ≠orientation). However, coaches may also use different boundary conditions to promote the players' ability to adapt to different context information.