Hyaluronic Acid: The Influence of Molecular Weight on Structural, Physical, Physico-Chemical, and Degradable Properties of Biopolymer

Evaluation of Gelatin/Hyaluronic Acid-Generated Bridging in a 3D-Printed Titanium Cage for Bone Regeneration

3D-printed titanium (Ti) cages present an attractive alternative for addressing issues related to osteoporosis-induced fractures, accidental fractures, and spinal fusion surgery due to disc herniation. These Ti-based bone implants possess superior strength compared to other metals, allowing for versatile applications in orthopedic scenarios. However, when used as standalone solutions, certain considerations may arise, such as interaction with soft tissues. Therefore, to overcome these issues, the combination with hydrogel has been considered. In this study, to impart Ti with regenerative abilities a 3D-printed Ti cage was loaded with gelatin and hyaluronic acid (G-H) to improve the cell attachment ability of the Ti-based bone implants. The void spaces within the mesh structure of the 3D Ti cage were filled with G-H, creating a network of micro-sized pores. The filled G-H acted as the bridge for the cells to migrate toward the large inner pores of the 3D Ti cage. Due to the microporous surface and slow release of gelatin and hyaluronic acid, the biocompatibility of the coated Ti cage was increased with an elevation in osteoconduction as depicted by the up-regulation of bone-related gene expressions. The in vivo implantation in the rabbit femur model showed enhanced bone regeneration due to the coated G-H on the Ti cage compared to the pristine hollow Ti cage. The G-H filled the large holes of the 3D Ti cage that acted as a bridge for the cells to travel inside the implant and aided in the fast regeneration of bone.

Slippery Viscosity-Sensing Platform with Time Readout for the Detection of Hyaluronidase and Its Inhibitor

Hyaluronidase (HAase) is a biomarker for cancer, and its detection is of great significance for early diagnosis. However, the requirement of sophisticated instruments, tedious operation procedures, and labeled molecules of conventional HAase biosensing methods hampers their widespread applications. Herein, we report a portable slippery viscosity-sensing platform with time readout for the first time and demonstrate HAase and tannic acid (TA, HAase inhibitor) detection as a model system. HAase specifically cleaves hyaluronic acid (HA) and decreases HA solution viscosity, thereby shortening the aqueous droplet's sliding time on a slippery surface. Thus, the HA solution viscosity alteration due to enzymatic hydrolysis is used to quantify the HAase concentration through the difference in the sliding time of the aqueous droplets on a slippery surface. The developed HAase sensing platform exhibits high sensitivity with a minimum detection limit of 0.23 U/mL and excellent specificity without the use of specialized instruments and labeled molecules. HAase detection in actual urine samples by a standard addition method is performed as well. Moreover, the quantitative detection of TA with an IC50 value of 37.68 ± 1.38 μg/mL is achieved. As an equipment-free, label-free, and high-portability sensing platform, this method holds promise in developing a user-friendly and inexpensive point-of-care testing (POCT) device for HAase detection, and its use can be extended to analyze other analytes with different stimuli-responsive polymers for great universality and expansibility in biosensing applications.

Cysteamine Eye Drops in Hyaluronic Acid Packaged in Innovative Single-Dose Systems, Part II: Long-Term Stability and Clinical Ocular Biopermanence

BACKGROUND

Cystinosis is a rare genetic disorder characterized by the accumulation of cystine crystals in several tissues and organs causing, among others, severe eye symptoms. The high instability of cysteamine eye drops makes it difficult to develop formulations with an acceptable shelf life to be prepared in hospital pharmacy departments. Previously, a new compounded formulation of cysteamine eye drops in hyaluronic acid (HA) packaged in innovative single-dose systems was developed.

METHODS

Long-term stability at -20 °C of this formulation was studied considering the content of cysteamine, pH, osmolality, viscosity, and microbiological analysis. The oxygen permeability of single-dose containers was also studied and an ocular biopermanence study was conducted in healthy volunteers measuring lacrimal stability and volume parameters.

RESULTS

Data confirm that cysteamine concentration remained above 90% for 120 days, all parameters remaining within the accepted range for ophthalmic formulations. The permeability of the containers was reduced over time, while ocular biopermanence was maintained despite the freezing process and storage time.

CONCLUSIONS

0.55% cysteamine hydrochloride formulation in HA and packaged in single-dose containers preserved at -20 °C is stable for 120 days protected from light, presenting high potential for its translation into clinical practice when commercial presentations are not available.

Cumulus expansion is impaired with advanced reproductive age due to loss of matrix integrity and reduced hyaluronan

Reproductive aging is associated with ovulatory defects. Age-related ovarian fibrosis partially contributes to this phenotype as short-term treatment with anti-fibrotic compounds improves ovulation in reproductively old mice. However, age-dependent changes that are intrinsic to the follicle may also be relevant. In this study, we used a mouse model to demonstrate that reproductive aging is associated with impaired cumulus expansion which is accompanied by altered morphokinetic behavior of cumulus cells as assessed by time-lapse microscopy. The extracellular matrix integrity of expanded cumulus-oocyte complexes is compromised with advanced age as evidenced by increased penetration of fluorescent nanoparticles in a particle exclusion assay and larger open spaces on scanning electron microscopy. Reduced hyaluronan (HA) levels, decreased expression of genes encoding HA-associated proteins (e.g., Ptx3 and Tnfaip6), and increased expression of inflammatory genes and matrix metalloproteinases underlie this loss of matrix integrity. Importantly, HA levels are decreased with age in follicular fluid of women, indicative of conserved reproductive aging mechanisms. These findings provide novel mechanistic insights into how defects in cumulus expansion contribute to age-related infertility and may serve as a target to extend reproductive longevity.

Evaluation of the Effect of Honey-Containing Chitosan/Hyaluronic Acid Hydrogels on Wound Healing

The 3D polymeric network structure of hydrogels imitates the extracellular matrix, thereby facilitating cell growth and differentiation. In the current study, chitosan/hyaluronic acid/honey coacervate hydrogels were produced without any chemicals or crosslinking agents and investigated for their wound-healing abilities. Chitosan/hyaluronic acid/honey hydrogels were characterized by FTIR, SEM, and rheology analysis. Moreover, their water content, water uptake capacities, and porosity were investigated. In FT-IR spectra, it was discovered that the characteristic band placement of chitosan with hyaluronic acid changed upon interacting with honey. The porosity of the honey-containing hydrogels (12%) decreased compared to those without honey (17%). Additionally, the water-uptake capacity of honey-containing hydrogels slightly decreased. Also, it was observed that hydrogels' viscosity increased with the increased hyaluronic acid amount and decreased with the amount of honey. The adhesion and proliferation of fibroblast cells on the surface of hydrogel formulations were highest in honey-containing hydrogels (144%). In in vivo studies, wound healing was accelerated by honey addition. It has been demonstrated for the first time that honey-loaded chitosan-hyaluronic acid hydrogels, prepared without the use of toxic covalent crosslinkers, have potential for use in wound healing applications.

Fabrication and Characterization of PVA-WPI Based Nanofiber Mats for Improved Viability of Lactobacillus rhamnosus GG

In the current study, whey protein-based nanofibers were fabricated to encapsulate Lactobacillus rhamnosus. Purposely, different ratios of PVA (polyvinyl alcohol) and WPI (whey protein isolate) were blended to fabricate nanofibers. Nanofiber mats were characterized in terms of particle size, diameter, tensile strength, elongation at break, and loading efficiency. Morphological and molecular characterizations were carried out using scanning electron microscopy (SEM) and Fourier transform infrared (FTIR). Moreover, in vitro viability under simulated gastrointestinal (GI) conditions and thermal stability were also assessed. The results reveal that by increasing the PVA concentration, the conductivity increased while the viscosity decreased. SEM micrographs showed that probiotics were successfully loaded within the nanofiber. The FTIR spectra show strong bonding between the encapsulating materials with the addition of probiotics. In vitro and thermal analyses revealed that the survival of encapsulated probiotics significantly (p < 0.05) improved. In a nutshell, PVA-WPI composite nanofibers have promising potential when used to enhance the viability and stability of probiotics under adverse conditions.

Biotechnological advances in the synthesis of modified chondroitin towards novel biomedical applications

Chondroitin sulfate (CS) is a well-known glycosaminoglycan present in a large variety of animal tissues, with an outstanding structural heterogeneity mainly related to molecular weight and sulfation pattern. Recently, few microorganisms, eventually engineered, proved able to synthesize the CS biopolymer backbone, composed of d-glucuronic acid and N-acetyl-d-galactosamine linked through alternating β-(1-3)- and β-(1-4)-glycosidic bonds, and secrete the biopolymers generally unsulfated and possibly decorated with other carbohydrates/molecules. Enzyme catalyzed/assisted methods and chemical tailored protocols allowed to obtain a variety of macromolecules not only resembling the natural extractive ones, but even enlarging the access to unnatural structural features. These macromolecules have been investigated for their bioactivity in vitro and in vivo establishing their potentialities in an array of novel applications in the biomedical field. This review aims to present an overview of the advancements in: i) the metabolic engineering strategies and the biotechnological processes towards chondroitin manufacturing; ii) the chemical approaches applied to obtain specific structural features and targeted decoration of the chondroitin backbone; iii) the biochemical and biological properties of the diverse biotechnological-sourced chondroitin polysaccharides reported so far, unraveling novel fields of applications.

Recent Progress of the Vat Photopolymerization Technique in Tissue Engineering: A Brief Review of Mechanisms, Methods, Materials, and Applications

Vat photopolymerization (VP), including stereolithography (SLA), digital light processing (DLP), and volumetric printing, employs UV or visible light to solidify cell-laden photoactive bioresin contained within a vat in a point-by-point, layer-by-layer, or volumetric manner. VP-based bioprinting has garnered substantial attention in both academia and industry due to its unprecedented control over printing resolution and accuracy, as well as its rapid printing speed. It holds tremendous potential for the fabrication of tissue- and organ-like structures in the field of regenerative medicine. This review summarizes the recent progress of VP in the fields of tissue engineering and regenerative medicine. First, it introduces the mechanism of photopolymerization, followed by an explanation of the printing technique and commonly used biomaterials. Furthermore, the application of VP-based bioprinting in tissue engineering was discussed. Finally, the challenges facing VP-based bioprinting are discussed, and the future trends in VP-based bioprinting are projected.

Rapid Recovery after Reparation of Full-Thickness Chondral Defects of the Knee with the Use of Hyaluronan (HA)-Based 3-D Scaffold

Articular cartilage injuries are found in up to 60% of patients who undergo an arthroscopic knee procedure, and those that totally affect articular cartilage (grade IV) have limited regenerative capacity and extended time for recovery. 3-D scaffolds represent a novel solution to address this type of injury. Our purpose was to analyze the MRI findings and functional status of patients that underwent repair of chondral defects either by microfractures or Hyaluronan (HA) 3-D scaffolding. We conducted a retrospective study of patients with chondral defects. The outcomes analyzed in this study included anatomical changes evaluated by the Henderson score (based on MRI findings) at baseline, 6, and 12 months after surgery, and improvement in functionality evaluated by the Modified Cincinnati Knee Rating System (MCKRS) at baseline and 6 months after surgery. Clinical and demographic characteristics were similar for both groups. There was a statistically significant improvement in Henderson score for the 3-D scaffold-treated group at 6 months versus the microfracture group (p < 0.0001). Improvement in functionality, measured by the MCKRS, was more frequently found in the 3-D scaffold-treated group. In conclusion, the use of HA 3-D scaffolding was superior, with faster recovery evident 6 months after the surgery that progressed to full recovery in all patients a year after surgery. Future studies with a randomized design might help to support our findings. This study provides level III evidence.

The Effect of Nanobubbles on Transdermal Applications

In the present work, a new method for dermal delivery using nanobubbles (NBs) is investigated. Oxygen NBs are generated in deionized water and used to produce cosmetic formulations with hyaluronic acid as an active ingredient. Nanobubbles result in the improvement of the effect and penetration of the active ingredient through Strat-M, a synthetic membrane that resembles human skin. Experiments conducted with the Franz Cell device confirm the greater penetration of the active ingredient into Strat-M due to NBs, compared to cosmetic formulations that do not contain NBs. The effect of NBs was further examined by measuring UV-Vis and FTIR spectra. A possible mechanism was outlined, too. It was also found that NBs do not change the pH or the FTIR spectrum of the cosmetic serum indicating non-toxicity.

En route to local glioblastoma treatment with temozolomide doped hyaluronan fibres: formulation and in vitro cell studies

We report the preparation, characterisation and in vitro tests of hyaluronan fibres containing up to 50 w/w% of temozolomide for local glyoblastoma treatment. These fibres form a hydrogel upon contact with cerebrospinal fluid on the treatment spot.

Production of isotopically enriched high molecular weight hyaluronic acid and characterization by solid-state NMR

Hyaluronic acid (HA) is a naturally occurring polysaccharide that is abundant in the extracellular matrix (ECM) of all vertebrate cells. HA-based hydrogels have attracted great interest for biomedical applications due to their high viscoelasticity and biocompatibility. In both ECM and hydrogel applications, high molecular weight (HMW)-HA can absorb a large amount of water to yield matrices with a high level of structural integrity. To understand the molecular underpinnings of structural and functional properties of HA-containing hydrogels, few techniques are available. Nuclear magnetic resonance (NMR) spectroscopy is a powerful tool for such studies, e.g. ¹³C NMR measurements can reveal the structural and dynamical features of (HMW) HA. However, a major obstacle to ¹³C NMR is the low natural abundance of ¹³C, necessitating the generation of HMW-HA that is enriched with ¹³C isotopes. Here we present a convenient method to obtain ¹³C- and ¹⁵N-enriched HMW-HA in good yield from Streptococcus equi subsp. zooepidemicus. The labeled HMW-HA has been characterized by solution and magic angle spinning (MAS) solid-state NMR spectroscopy, as well as other methods. These results will open new ways to study the structure and dynamics of HMW-HA-based hydrogels, and interactions of HMW-HA with proteins and other ECM components, using advanced NMR techniques.

In Situ Cross-Linkable Hyaluronic-Ferulic Acid Conjugate Containing Bucladesine Nanoparticles Promotes Neural Regeneration after Spinal Cord Injury

Dysfunctional clinical outcomes following spinal cord injury (SCI) result from glial scar formation, leading to the inhibition of new axon growth and impaired regeneration. Nevertheless, nerve regeneration after SCI is possible, provided that the state of neuron development in the injured environment is improved. Hence, biomaterial-based therapy would be a promising strategy to endow a desirable environment for tissue repair. Herein, we designed a novel multifunctional injectable hydrogel with antioxidant, neuroprotective, and neuroregenerative effects. Bucladesine-encapsulated chitosan nanoparticles (BCS NPs) were first prepared and embedded in a matrix of thiol-functionalized hyaluronic acid modified with ferulic acid (HASH-FA). The target hydrogel (HSP-F/BCS) was then created through Michael-type addition between HASH-FA containing BCS NPs and four-arm polyethylene glycol-maleimide (4-Arm-PEG-Mal). The obtained hydrogel with shear thinning behavior showed viscoelastic and mechanical properties similar to the normal nerve tissue. FA conjugation significantly improved the antioxidant activity of HA, and suppressed intracellular ROS formation. In situ injection of the HSP-F/BCS hydrogel in a rat contusion model of SCI inhibited glial scar progression, reduced microglia/macrophage infiltration, promoted angiogenesis, and induced myelinated axon regeneration. As a result, a significant improvement in motor performance was observed compared to other experimental groups. Taken together, the HSP-F/BCS hydrogel developed in this study could be a promising system for SCI repair.

Investigation of Crosslinking Parameters and Characterization of Hyaluronic Acid Dermal Fillers: From Design to Product Performances

Despite process similarities, distinctive manufacturing technologies offer hyaluronic acid dermal fillers with different in vitro physicochemical and rheological properties due to peculiar crosslinked hydrogel networks. A better understanding of dermal filler properties could provide specific clinical indications and expectations with more accurate performance correlations. In this study, with an emphasis on the degree of modification, hyaluronic acid concentration and molecular weight, these process parameters were able to modulate dermal filler properties, especially rheology. Moreover, an extensive characterization of commercial hyaluronic acid injectables of the Hyal System line was described to present product properties and help to elucidate related clinical effects. Standardized methodologies were applied to correlate in vitro parameters with feasible clinical indications. In view of an optimized dermal filler design, the results of the extrudability measurements allowed the quantification of the effect of hydrogel composition, rheological properties and needle size on injectability. Composition, dynamic viscosity and needle size showed an impactful influence on hydrogel extrudability. Finally, the positive influence of 200 KDa hyaluronic acid in comparison to fragments of ether-crosslinked hyaluronic acid on fibroblast recognition were shown with a migration assay.

Hyaluronic acid: An overlooked extracellular vesicle contaminant

The variable presence of contaminants in extracellular vesicle (EV) samples is one of the major contributors to a lack of inter-study reproducibility in the field. Well-known contaminants include protein aggregates, RNA-protein complexes and lipoproteins, which resemble EVs in shape, size and/or density. On the contrary, polysaccharides, such as hyaluronic acid (HA), have been overlooked as EV contaminants. Here, it is shown that low and medium molecular weight HA polymers are unexpectedly retained to some extent in EV fractions using two common isolation methods known for high purity: size-exclusion chromatography and tangential flow filtration. Although these isolation techniques are capable of efficient removal of non-EV-associated proteins, this is not the case for HA polymers, which are partially retained in a molecular weight-dependent manner, especially with size-exclusion chromatography. The supramolecular structure and hydrodynamic size of HA are likely to contribute to isolation in EV fractions of filtration-based approaches. Conversely, HA polymers were not retained with ultracentrifugation and polymer-based precipitation methods, which are known for co-isolating other types of contaminants. HA has a broad range of immunomodulatory effects, similar to those ascribed to various sources of EVs. Therefore, HA contaminants should be considered in future studies to avoid potential inaccurate attributions of functional effects to EVs.

Current Status and Trends in Nucleic Acids for Cancer Therapy: A Focus on Polysaccharide-Based Nanomedicines

The efficacious delivery of therapeutic nucleic acids to cancer still remains an open issue. Through the years, several strategies are developed for the encapsulation of genetic molecules exploiting different materials, such as viral vectors, lipid nanoparticles (LNPs), and polymeric nanoparticles (NPs). Indeed, the rapid approval by regulatory authorities and the wide use of LNPs complexing the mRNA coding for the spark protein for COVID-19 vaccination paved the way for the initiation of several clinical trials exploiting lipid nanoparticles for cancer therapy. Nevertheless, polymers still represent a valuable alternative to lipid-based formulations, due to the low cost and the chemical flexibility that allows for the conjugation of targeting ligands. This review will analyze the status of the ongoing clinical trials for cancer therapy, including vaccination and immunotherapy approaches, exploiting polymeric materials. Among those nanosized carriers, sugar-based backbones are an interesting category. A cyclodextrin-based carrier (CALAA-01) is the first polymeric material to enter a clinical trial complexed with siRNA for cancer therapy, and chitosan is one of the most characterized non-viral vectors able to complex genetic material. Finally, the recent advances in the use of sugar-based polymers (oligo- and polysaccharides) for the complexation of nucleic acids in advanced preclinical stage will be discussed.

Polysaccharide hydrogel platforms as suitable carriers of liposomes and extracellular vesicles for dermal applications

Lipid-based nanocarriers have been extensively investigated for their application in drug delivery. Particularly, liposomes are now clinically established for treating various diseases such as fungal infections. In contrast, extracellular vesicles (EVs) - small cell-derived nanoparticles involved in cellular communication - have just recently sparked interest as drug carriers but their development is still at the preclinical level. To drive this development further, the methods and technologies exploited in the context of liposome research should be applied in the domain of EVs to facilitate and accelerate their clinical translation. One of the crucial steps for EV-based therapeutics is designing them as proper dosage forms for specific applications. This review offers a comprehensive overview of state-of-the-art polysaccharide-based hydrogel platforms designed for artificial and natural vesicles with application in drug delivery to the skin. We discuss their various physicochemical and biological properties and try to create a sound basis for the optimization of EV-embedded hydrogels as versatile therapeutic avenues.

Hyaluronic Acid in Rheumatology

Hyaluronic acid (HA), also known as hyaluronan, is an anionic glycosaminoglycan widely distributed throughout various tissues of the human body. It stands out from other glycosaminoglycans as it lacks sulfation and can attain considerable size: the average human synovial HA molecule weighs about 7 million Dalton (Da), equivalent to roughly 20,000 disaccharide monomers; although some sources report a lower range of 3-4 million Da. In recent years, HA has garnered significant attention in the field of rheumatology due to its involvement in joint lubrication, cartilage maintenance, and modulation of inflammatory and/or immune responses. This review aims to provide a comprehensive overview of HA's involvement in rheumatology, covering its physiology, pharmacology, therapeutic applications, and potential future directions for enhancing patient outcomes. Nevertheless, the use of HA therapy in rheumatology remains controversial with conflicting evidence regarding its efficacy and safety. In conclusion, HA represents a promising therapeutic option to improve joint function and alleviate inflammation and pain.

3D Printing of Extracellular Matrix-Based Multicomponent, All-Natural, Highly Elastic, and Functional Materials toward Vascular Tissue Engineering

3D printing offers an exciting opportunity to fabricate biological constructs with specific geometries, clinically relevant sizes, and functions for biomedical applications. However, successful application of 3D printing is limited by the narrow range of printable and bio-instructive materials. Multicomponent hydrogel bioinks present unique opportunities to create bio-instructive materials able to display high structural fidelity and fulfill the mechanical and functional requirements for in situ tissue engineering. Herein, 3D printable and perfusable multicomponent hydrogel constructs with high elasticity, self-recovery properties, excellent hydrodynamic performance, and improved bioactivity are reported. The materials' design strategy integrates fast gelation kinetics of sodium alginate (Alg), in situ crosslinking of tyramine-modified hyaluronic acid (HAT), and temperature-dependent self-assembly and biological functions of decellularized aorta (dAECM). Using extrusion-based printing approach, the capability to print the multicomponent hydrogel bioinks with high precision into a well-defined vascular constructs able to withstand flow and repetitive cyclic compressive loading, is demonstrated. Both in vitro and pre-clinical models are used to show the pro-angiogenic and anti-inflammatory properties of the multicomponent vascular constructs. This study presents a strategy to create new bioink whose functional properties are greater than the sum of their components and with potential applications in vascular tissue engineering and regenerative medicine.

Marine Biomaterials: Hyaluronan

The marine-derived hyaluronic acid and other natural biopolymers offer exciting possibilities in the field of biomaterials, providing sustainable and biocompatible alternatives to synthetic materials. Their unique properties and abundance in marine sources make them valuable resources for various biomedical and industrial applications. Due to high biocompatible features and participation in biological processes related to tissue healing, hyaluronic acid has become widely used in tissue engineering applications, especially in the wound healing process. The present review enlightens marine hyaluronan biomaterial providing its sources, extraction process, structures, chemical modifications, biological properties, and biocidal applications, especially for wound healing/dressing purposes. Meanwhile, we point out the future development of wound healing/dressing based on hyaluronan and its composites and potential challenges.

Recent Progress in Hyaluronic-Acid-Based Hydrogels for Bone Tissue Engineering

Hydrogel-based bone tissue engineering is a potential strategy for treating bone abnormalities and fractures. Hyaluronic acid (HA) is a natural polymer that is widely distributed in the human body and plays a significant role in numerous physiological processes such as cell migration, tissue hydration, and wound healing. Hydrogels based on HA and its derivatives have gained popularity as potential treatments for bone-related diseases. HA-based hydrogels have been extensively studied for their ability to mimic the natural extracellular matrix of bone tissue and provide a suitable microenvironment for cell support and tissue regeneration. The physical and chemical properties of HA can be modified to improve its mechanical strength, biocompatibility, and osteogenic potential. Moreover, HA-based hydrogels combined with other biomaterials in the presence or absence of bioactive agents have been investigated as a means of improving the mechanical properties and bioactivity of the hydrogel scaffold. Therefore, HA-based hydrogels have shown great promise in bone tissue engineering due to their biocompatibility, osteogenic activity, and ability to mimic the natural extracellular matrix of bone tissue. Overall, this review provides a comprehensive overview of the current state of the art in HA-based hydrogels for bone tissue engineering, highlighting the key advances, challenges, and future directions in this rapidly evolving field.

Biocompatible topical delivery system of high-molecular-weight hyaluronan into human stratum corneum using magnesium chloride

Non-invasive delivery of hyaluronan into the stratum corneum (SC) is extremely difficult because of its high molecular weight and the strong barrier of the SC. We developed a safe method of administering hyaluronan into the human SC and determined its penetration route. The amount of hyaluronan that penetrated into the SC was 1.5-3 times higher in the presence of magnesium chloride hexahydrate (MgCl₂) than other metal chlorides. The root-mean-square radius of hyaluronan in water decreased with the addition of MgCl₂. Moreover, MgCl₂ solutions maintained their dissolved state on a plastic plate for a long time, suggesting that size compaction and inhibition of hyaluronan precipitation on the skin enhanced hyaluronan into the SC. Our results also strongly suggest that an intercellular route contributes to the penetration of hyaluronan from the upper to the middle layer of the SC. No disruption to the SC barrier was observed after continuous use once a day for 1 month, demonstrating the potential of our method for the safe, topical application of hyaluronan.

Recent Advances in Functional Wound Dressings

Significance: Nowadays, the wound dressing is no longer limited to its primary wound protection ability. Hydrogel, sponge-like material, three dimensional-printed mesh, and nanofiber-based dressings with incorporation of functional components, such as nanomaterials, growth factors, enzymes, antimicrobial agents, and electronics, are able to not only prevent/treat infection but also accelerate the wound healing and monitor the wound-healing status. Recent Advances: The advances in nanotechnologies and materials science have paved the way to incorporate various functional components into the dressings, which can facilitate wound healing and monitor different biological parameters in the wound area. In this review, we mainly focus on the discussion of recently developed functional wound dressings. Critical Issues: Understanding the structure and composition of wound dressings is important to correlate their functions with the outcome of wound management. Future Directions: "All-in-one" dressings that integrate multiple functions (e.g., monitoring, antimicrobial, pain relief, immune modulation, and regeneration) could be effective for wound repair and regeneration.

The effect of manipulating glucuronic acid biosynthetic pathway in Bacillus subtilis strain on hyaluronic acid production

Hyaluronic acid (HA), composed of glucuronic acid (GlcUA) and N-acetyl glucoseamine (GlcNAc), is a versatile biopolymer with high commercial value and innumerous physiological roles and pharmaceutical applications. The hasA gene has main role in HA biosynthesis by Streptococcus strain as a natural producer. The hasB and hasC genes are also mediate GlcUA precursor biosynthesis. In the present study, S. equisimilis hasA gene; B. subtilis tuaD and gtaB genes for GlcUA precursors enhancement, and vgb gene coding bacterial hemoglobin as an oxygen provider were used to construct the B. subtilis strain for HA production. RBSHA (hasA), RBSHA2 (hasA/tuaD/gtaB), and RBSHA3 (hasA/tuaD/gtaB/vgb) strains were developed and confirmed through genotype and phenotype analysis. After HA production and purification, FTIR spectroscopy confirmed the produced HA structures. HA assay showed the highest HA titer for RBSHA3 (2.1 ± 0.18 mg/ml) and then RBSHA2 (1.9 ± 0.03 mg/ml), and RBSHA (0.6 ± 0.14 mg/ml). Statistical analysis indicated there is no significant difference in HA titer between RBSHA2 and RBSHA3 strains (p-value > 0.05), however, these strains produced HA approximately 4-fold higher than that of RBSHA strain. Agarose gel electrophoresis showed the same molecular weight (< 30 kDa) of produced HA by strains. Dynamic light scattering (DLS) revealed all HA polymers had a relatively low polydispersity index (PDI < 0.5). These findings demonstrate the successful GlcUA biosynthetic pathway engineering strategy in improving HA yield by recombinant B. subtilis, metabolically-robust, and industrially potential strain.

Hyaluronic Acid: A Powerful Biomolecule with Wide-Ranging Applications-A Comprehensive Review

Hyaluronic acid (HA) is a glycosaminoglycan widely distributed in the human body, especially in body fluids and the extracellular matrix of tissues. It plays a crucial role not only in maintaining tissue hydration but also in cellular processes such as proliferation, differentiation, and the inflammatory response. HA has demonstrated its efficacy as a powerful bioactive molecule not only for skin antiaging but also in atherosclerosis, cancer, and other pathological conditions. Due to its biocompatibility, biodegradability, non-toxicity, and non-immunogenicity, several HA-based biomedical products have been developed. There is an increasing focus on optimizing HA production processes to achieve high-quality, efficient, and cost-effective products. This review discusses HA's structure, properties, and production through microbial fermentation. Furthermore, it highlights the bioactive applications of HA in emerging sectors of biomedicine.

Hydrocolloids from the Mushroom Auricularia heimuer: Composition and Properties

The ear- to shell-shaped fruiting bodies of the genus Auricularia are widely used as food and in traditional medicinal remedies. This study was primarily focused on the composition, properties and potential use of the gel-forming extract from Auricularia heimuer. The dried extract contained 50% soluble homo- and heteropolysaccharides, which were mainly composed of mannose and glucose, acetyl residues, glucuronic acid and a small amount of xylose, galactose, glucosamine, fucose, arabinose and rhamnose. The minerals observed in the extract included approximately 70% potassium followed by calcium. Among the fatty and amino acids, 60% unsaturated fatty acids and 35% essential amino acids could be calculated. At both acidic (pH 4) and alkaline (pH 10) conditions, the thickness of the 5 mg/mL extract did not change in a temperature range from -24 °C to room temperature, but decreased statistically significantly after storage at elevated temperature. At neutral pH, the studied extract demonstrated good thermal and storage stability, as well as a moisture retention capacity comparable to the high molecular weight sodium hyaluronate, a well-known moisturizer. Hydrocolloids that can be sustainably produced from Auricularia fruiting bodies offer great application potential in the food and cosmetic industries.

Cyclodextrin-enabled nepafenac eye drops with improved absorption open a new therapeutic window

Nepafenac is a highly effective NSAID used for treating postoperative ocular inflammation and pain after cataract surgery and its advantage over conventional topical NSAIDs has been proved many times. However, Nevanac® is a suspension eye drop, which clearly lacks patient compliance causing irritation, blurred vision, foreign body sensation along with problematic dosage due to its sticky, inhomogeneous consistence. In this study, nepafenac containing eye drops were prepared using hydroxypropyl-β-cyclodextrin to ensure complete dissolution of nepafenac, sodium hyaluronate to provide mucoadhesion and adequate viscosity and a preservative-free officinal formula, Oculogutta Carbomerae containing carbomer (just like Nevanac®), therefore providing a similar base for the new formulations. According to an experimental design, 11 formulations were tested in vitro including two reference formulations by measuring their viscosity, mucoadhesion, drug release and corneal permeability. Finally, two formulations were found promising and investigated further on porcine eyes ex vivo and corneal distribution of nepafenac was determined by RAMAN mapping. The results showed that one formulation possessed better bioavailability ex vivo than Nevanac® 0.1 % suspension, while the other formulation containing only 60 % of the original dose were ex vivo equivalent with Nevanac® opening the way to nepafenac-containing eye drops with better patient compliance in the future.

Bioinks of Natural Biomaterials for Printing Tissues

Bioinks are inks-in other words, hydrogels-prepared from biomaterials with certain physiochemical properties together with cells to establish hierarchically complex biological 3D scaffolds through various 3D bioprinting technologies [...].

Natural Polymer-Based Thin Film Strategies for Skin Regeneration in Lieu of Regenerative Dentistry

Wound healing (WH) is a complex and dynamic process that comprises of a series of molecular and cellular events that occur after tissue injury. The injuries of the maxillofacial and oral region caused by trauma or surgery result in undesirable WH such as delayed wound closure and formation of scar tissue. Skin tissue engineering (TE)/regeneration is an emerging approach toward faster, superior, and more effective resolution of clinically significant wounds effectively. A multitude of TE principles approaches are being put to action for the fabrication of hydrogels, electrospun sheets, 3D scaffolds, and thin films that can be used as wound dressings materials, sutures, or skin substitutes. Thin films are advantageous over other materials owing to their flexibility, ability to provide a barrier against external contamination, easy gaseous exchange, and easy monitoring of wounds. This review focuses on wound-dressing films and their significance and discusses various fabrication techniques. In addition, we explore various natural biopolymers that can be used for fabrication of skin TE materials. Impact Statement In this review article, critical evaluations of natural polymers used in skin regeneration were discussed. Further, the fabrication technology of the 2D and 3D material in wound healing were discussed.

Polysaccharides-Naturally Occurring Immune Modulators

The prevention of disease and infection requires immune systems that operate effectively. This is accomplished by the elimination of infections and abnormal cells. Immune or biological therapy treats disease by either stimulating or inhibiting the immune system, dependent upon the circumstances. In plants, animals, and microbes, polysaccharides are abundant biomacromolecules. Due to the intricacy of their structure, polysaccharides may interact with and impact the immune response; hence, they play a crucial role in the treatment of several human illnesses. There is an urgent need for the identification of natural biomolecules that may prevent infection and treat chronic disease. This article addresses some of the naturally occurring polysaccharides of known therapeutic potential that have already been identified. This article also discusses extraction methods and immunological modulatory capabilities.

Therapeutic Agent-Loaded Fibrous Scaffolds for Biomedical Applications

Tissue engineering is a sophisticated field that involves the integration of various disciplines, such as clinical medicine, material science, and life science, to repair or regenerate damaged tissues and organs. To achieve the successful regeneration of damaged or diseased tissues, it is necessary to fabricate biomimetic scaffolds that provide structural support to the surrounding cells and tissues. Fibrous scaffolds loaded with therapeutic agents have shown considerable potential in tissue engineering. In this comprehensive review, we examine various methods for fabricating bioactive molecule-loaded fibrous scaffolds, including preparation methods for fibrous scaffolds and drug-loading techniques. Additionally, we delved into the recent biomedical applications of these scaffolds, such as tissue regeneration, inhibition of tumor recurrence, and immunomodulation. The aim of this review is to discuss the latest research trends in fibrous scaffold manufacturing methods, materials, drug-loading methods with parameter information, and therapeutic applications with the goal of contributing to the development of new technologies or improvements to existing ones.

Glycan Node Analysis Detects Varying Glycosaminoglycan Levels in Melanoma-Derived Extracellular Vesicles

Extracellular vesicles (EVs) play important roles in (patho)physiological processes by mediating cell communication. Although EVs contain glycans and glycosaminoglycans (GAGs), these biomolecules have been overlooked due to technical challenges in comprehensive glycome analysis coupled with EV isolation. Conventional mass spectrometry (MS)-based methods are restricted to the assessment of N-linked glycans. Therefore, methods to comprehensively analyze all glyco-polymer classes on EVs are urgently needed. In this study, tangential flow filtration-based EV isolation was coupled with glycan node analysis (GNA) as an innovative and robust approach to characterize most major glyco-polymer features of EVs. GNA is a molecularly bottom-up gas chromatography-MS technique that provides unique information that is unobtainable with conventional methods. The results indicate that GNA can identify EV-associated glyco-polymers that would remain undetected with conventional MS methods. Specifically, predictions based on GNA identified a GAG (hyaluronan) with varying abundance on EVs from two different melanoma cell lines. Enzyme-linked immunosorbent assays and enzymatic stripping protocols confirmed the differential abundance of EV-associated hyaluronan. These results lay the framework to explore GNA as a tool to assess major glycan classes on EVs, unveiling the EV glycocode and its biological functions.

The value of injectable viscoelastic supplements for joints

Intra-articular viscoelastic supplements are commonly administered by musculoskeletal radiologists for the treatment of symptomatic osteoarthritis (OA). This article provides an overview of the putative mechanism of action of the agents, a brief review of the evidence base underlying the practice, a commentary on some of the major society guidelines regarding the treatment, and a description of the adverse events that are associated with intra-articular hyaluronic acid administration.

Hyaluronic Acid as Bioink and Hydrogel Scaffolds for Tissue Engineering Applications

Bioprinting is an additive manufacturing technique that focuses on developing living tissue constructs using bioinks. Bioink is crucial in determining the stability of printed patterns, which remains a major challenge in bioprinting. Thus, the choices of bioink composition, modifications, and cross-linking methods are being continuously researched to augment the clinical translation of bioprinted constructs. Hyaluronic acid (HA) is a naturally occurring polysaccharide with the repeating unit of N-acetyl-glucosamine and d-glucuronic acid disaccharides. It is present in the extracellular matrix (ECM) of tissues (skin, cartilage, nerve, muscle, etc.) with a wide range of molecular weights. Due to the nature of its chemical structure, HA could be easily subjected to chemical modifications and cross-linking that would enable better printability and stability. These interesting properties have made HA an ideal choice of bioinks for developing tissue constructs for regenerative medicine applications. In this Review, the physicochemical properties, reaction chemistry involved in various cross-linking strategies, and biomedical applications of HA have been elaborately discussed. Further, the features of HA bioinks, emerging strategies in HA bioink preparations, and their applications in 3D bioprinting have been highlighted. Finally, the current challenges and future perspectives in the clinical translation of HA-based bioinks are outlined.

Anti-Viral Surfaces in the Fight against the Spread of Coronaviruses

This review is conducted against the background of nanotechnology, which provides us with a chance to effectively combat the spread of coronaviruses, and which primarily concerns polyelectrolytes and their usability for obtaining protective function against viruses and as carriers for anti-viral agents, vaccine adjuvants, and, in particular, direct anti-viral activity. This review covers nanomembranes in the form of nano-coatings or nanoparticles built of natural or synthetic polyelectrolytes--either alone or else as nanocomposites for creating an interface with viruses. There are not a wide variety of polyelectrolytes with direct activity against SARS-CoV-2, but materials that are effective in virucidal evaluations against HIV, SARS-CoV, and MERS-CoV are taken into account as potentially active against SARS-CoV-2. Developing new approaches to materials as interfaces with viruses will continue to be relevant in the future.

Modification of hyaluronic acid to enable click chemistry photo-crosslinking of hydrogels with tailorable degradation profiles

Hyaluronic acid (HA) is a naturally occurring mucopolysaccharide that, due to its inherent bioactivity and extracellular matrix-like structure, has the potential to be utilised extensively in tissue engineering. However, this glycosaminoglycan lacks the properties required for cellular adhesion and photo-crosslinking by UV light, which significantly hinders this polymers applicability. This research presents a method for modifying hyaluronic acid via thiolation and methacrylation to generate a novel photo-crosslinkable polymer with improved physicochemical properties, biocompatibility and the potential to customize biodegradability according to the ratio of monomers used. A decrease in stiffness proportional to increasing thiol concentration was observed when testing the compressive strength of hydrogels. Conversely, it was noted that the storage moduli of hydrogels increased proportionally to thiol concentration indicating a greater degree of cross-linking with the addition of thiol. The addition of thiol to HA increased the biocompatibility of the material in both neuronal and glial cell lines and improved the degradability of methacrylated HA. Due to the enhanced physicochemical properties and biocompatibility imparted by the introduction of thiolated HA, this novel hydrogel system could have numerous bioengineering applications.

The applications of 3D printing in wound healing: the external delivery of stem cells and antibiosis

As the global number of chronic wound patients rises, the financial burden and social pressure on patients increase daily. Stem cells have emerged as promising tissue engineering seed cells due to their enriched sources, multidirectional differentiation ability, and high proliferation rate. However, delivering them in vitro for the treatment of skin injury is still challenging. In addition, bacteria from the wound site and the environment can significantly impact wound healing. In the last decade, 3D bioprinting has dramatically enriched cell delivery systems. The produced scaffolds by this technique can be precisely localized within cells and perform antibacterial actions. In this review, we summarized the 3D bioprinting-based external delivery of stem cells and their antibiosis to improve wound healing.

Biomimetic biphasic scaffolds in osteochondral tissue engineering: Their composition, structure and consequences

Approaches to the design and construction of biomimetic scaffolds for osteochondral tissue, show increasing advances. Considering the limitations of this tissue in terms of repair and regeneration, there is a need to develop appropriately designed scaffolds. A combination of biodegradable polymers especially natural polymers and bioactive ceramics, shows promise in this field. Due to the complicated architecture of this tissue, biphasic and multiphasic scaffolds containing two or more different layers, could mimic the physiology and function of this tissue with a higher degree of similarity. The purpose of this review article is to discuss the approaches focused on the application of biphasic scaffolds for osteochondral tissue engineering, common methods of combining layers and the ultimate consequences of their use in patients were discussed.

Ketoprofen-Based Polymer-Drug Nanoparticles Provide Anti-Inflammatory Properties to HA/Collagen Hydrogels

Current limitations of wound dressings for treating chronic wounds require the development of novel approaches. One of these is the immune-centered approach, which aims to restore the pro-regenerative and anti-inflammatory properties of macrophages. Under inflammatory conditions, ketoprofen nanoparticles (KT NPs) can reduce pro-inflammatory markers of macrophages and increase anti-inflammatory cytokines. To assess their suitability as part of wound dressings, these NPs were combined with hyaluronan (HA)/collagen-based hydro- (HGs) and cryogels (CGs). Different HA and NP concentrations and loading techniques for NP incorporation were used. The NP release, gel morphology, and mechanical properties were studied. Generally, colonialization of the gels with macrophages resulted in high cell viability and proliferation. Furthermore, direct contact of the NPs to the cells reduced the level of nitric oxide (NO). The formation of multinucleated cells on the gels was low and further decreased by the NPs. For the HGs that produced the highest reduction in NO, extended ELISA studies showed reduced levels of the pro-inflammatory markers PGE2, IL-12 p40, TNF-α, and IL-6. Thus, HA/collagen-based gels containing KT NPs may represent a novel therapeutic approach for treating chronic wounds. Whether effects observed in vitro translate into a favorable profile on skin regeneration in vivo will require rigorous testing.

A Novel Hyaluronic Acid Matrix Ingredient with Regenerative, Anti-Aging and Antioxidant Capacity

Hyaluronic acid (HA) and proteoglycans (such as dermatan sulphate (DS) and chondroitin sulphate (CS)) are the main components of the extracellular matrix of the skin, along with collagen and elastin. These components decrease with age, which implies a loss of skin moisture causing wrinkles, sagging and aging. Currently, the external and internal administration of effective ingredients that can reach the epidermis and dermis is the main alternative for combating skin aging. The objective of this work was to extract, characterise and evaluate the potential of an HA matrix ingredient to support anti-aging. The HA matrix was isolated and purified from rooster comb and characterised physicochemically and molecularly. In addition, its regenerative, anti-aging and antioxidant potential and intestinal absorption were evaluated. The results show that the HA matrix is composed of 67% HA, with an average molecular weight of 1.3 MDa; 12% sulphated glycosaminoglycans, including DS and CS; 17% protein, including collagen (10.4%); and water. The in vitro evaluation of the HA matrix's biological activity showed regenerative properties in both fibroblasts and keratinocytes, as well as moisturising, anti-aging and antioxidant effects. Furthermore, the results suggest that the HA matrix could be absorbed in the intestine, implying a potential oral as well as topical use for skin care, either as an ingredient in a nutraceutical or a cosmetic product.

Performance and biocompatibility of a novel inhalable dry powder formulation based on hyaluronic acid intended to protect the respiratory tract mucosa

Hyaluronic acid (HA) is a key component of the respiratory mucosa. By acting as a natural moisturizer, it provides hydration to the airways. In normal conditions, high molecular weight HA molecules form viscous gels providing a protective shield against external insults. This is particularly important in the upper airways where the HA protective barrier helps to prevent environmental agents to reach the lungs. Most respiratory diseases are characterized by inflammatory processes causing degradation of HA into small fragments which reduces the HA barrier effect and increases the risk of exposure to external insults. Dry powder inhalers (DPIs) are efficient devices used to deliver therapeutic molecules in the form of dry powder to the respiratory tract. PolmonYDEFENCE/DYFESA™ is a novel formulation based on HA delivered to the airways using the PillHaler® DPI device. In this study we report the results of in vitro inhalation performances of PolmonYDEFENCE/DYFESA™ as well as its mechanism of action in human cells. We found that the product targets the upper airways and that HA molecules form a protective barrier on cell surface. Furthermore, exposure to the device is safe in animal models. The promising pre-clinical results of this study provide the bases for future clinical investigation.

Different molecular weights of hyaluronan research in knee osteoarthritis: A state-of-the-art review

Osteoarthritis (OA), the most common form of arthritis, is characterized by progressive cartilage destruction, concomitant adaptive osteogenesis, and loss of joint function. The progression of OA with aging is associated with a decrease in native hyaluronan (HA, hyaluronate or hyaluronic acid) with a high molecular weight (HMW) in synovial fluid and a subsequent increase in lower MW HA and fragments. As HMW HA possesses numerous biochemical and biological properties, we review new molecular insights into the potential of HA to modify OA processes. Different MWs in the formulation of products appear to have varying effects on knee OA (KOA) pain relief, improved function, and postponing surgery. In addition to the safety profile, more evidence indicates that intraarticular (IA) HA administration may be an effective option to treat KOA, with a particular emphasis on the use of HA with fewer injections of higher MW, including potential applications of HA of very HMW. We also analyzed published systemic reviews and meta-analyses of IA HA in treating KOA in order to discuss their conclusions and consensus statements. According to its MW, HA may offer a simple way to refine therapeutic information in selective KOA.

Hyaluronic acid-coated gold nanoparticles as a controlled drug delivery system for poorly water-soluble drugs

Hyaluronic acid (HA) is a natural linear polysaccharide which has been widely used in cosmetics and pharmaceuticals including drug delivery systems because of its excellent biocompatibility. In this study, we investigated the one-pot synthesis of HA-coated gold nanoparticles (AuNP-HA) as a drug delivery carrier. The HAs with different molecular weights were produced by e-beam irradiation and employed as coating materials for AuNPs. Sulfasalazine (SSZ), a poorly water-soluble drug, was used to demonstrate the efficiency of drug delivery and the controlled release behaviour of the AuNP-HA. As the molecular weight of the HA decreased, the drug encapsulation efficiency of the SSZ increased up to 94%, while drug loading capacity of the SSZ was maintained at the level of about 70%. The prepared AuNP-HA-SSZ exhibited slow release of the SSZ over a short time and excellent sensitivity to different pHs and physiological conditions. The SSZ release rate was the lowest in simulated gastric conditions and the highest in simulated intestinal conditions. In this case, the AuNP-HA protects the SSZ from release under the acidic pH conditions in the stomach; on the other hand, the drug release was facilitated in the basic environment of the small intestine and colon. The SSZ was released under simulated intestinal conditions through anomalous drug transport and followed the Korsmeyer-Peppas model. Therefore, this study suggests that AuNP-HA is a promising orally-administered and intestine-targeted drug delivery system with controlled release characteristics.

Investigation of macromolecular transport through tunable collagen hyaluronic acid matrices

Therapeutic macromolecules possess properties such as size and electrostatic charge that will dictate their transport through subcutaneous (SC) tissue and ultimate bioavailability and efficacy. To improve therapeutic design, platforms that systematically measure the transport of macromolecules as a function of both drug and tissue properties are needed. We utilize a Transwell chamber with tunable collagen-hyaluronic acid (ColHA) hydrogels as an in vitro model to determine mass transport of macromolecules using non-invasive UV spectroscopy. Increasing hyaluronic acid (HA) concentration from 0 to 2 mg/mL within collagen gels decreases the mass transport of five macromolecules independent of size and charge and results in a maximum decrease in recovery of 23.3% in the case of bovine immunoglobulin G (IgG). However, in a pure 10 mg/mL HA solution, negatively-charged macromolecules bovine serum albumin (BSA), β-lactoglobulin (BLg), dextran (Dex), and IgG had drastically increased recovery by 20-40% compared to their performance in ColHA matrices. This result was different from the positively-charged macromolecule Lysozyme (Lys), which, despite its small size, showed reduced recovery by 3% in pure HA. These results demonstrate two distinct regimes of mass transport within our tissue model. In the presence of both collagen and HA, increasing HA concentrations decrease mass transport; however, in the absence of collagen, the high negative charge of HA sequesters and increases residence time of positively-charged macromolecules and decreases residence time of negatively-charged macromolecules. Through our approach, ColHA hydrogels serve as a platform for the systematic evaluation of therapeutic macromolecule transport as a function of molecular characteristics.

Effectiveness of hyaluronic acid in post-surgical cures following partial matricectomies with the phenol/alcohol technique: A randomized clinical trial

BACKGROUND

Post-operative cures with hyaluronic acid (HA) could potentially shorten the period recovery involved in the phenol technique for ingrown toenail. The aim of this study was therefore to compare a standard healing protocol with the experimental one based on hyaluronic acid cream.

MATERIAL AND METHODS

70 patients who had undergone phenol technique surgery for ingrown toenail were divided into two groups - control (n = 35) who received post-operative cures following the standard protocol with povidone iodine gel, and experimental (n = 35) who received cures with HA in the first 3 visits. Bleeding, total healing time, and perceived pain were assessed.

RESULTS

Patients in the control group recovered from the intervention in a total of 26.17 ± 7.75 days, while those in the HA group recovered in a significantly shorter time - 22.42 ± 2.41 days (p = 0.007, effect size 0.653). However, there were no between-group statistical differences in bleeding or perceived pain over the course of the post-surgery visits.

CONCLUSIONS

The use of low molecular weight hyaluronic acid is effective in reducing the phenol-technique healing time by 4 days compared with the standard cure. However, no extra effects such as reductions in bleeding or perceived pain can be expected in choosing this healing protocol.

Hyaluronic Acid Hydrogel Containing Resveratrol-Loaded Chitosan Nanoparticles as an Adjuvant in Atopic Dermatitis Treatment

Atopic dermatitis (AD) is a common disease-causing skin inflammation, redness, and irritation, which can eventually result in infection that drastically impacts patient quality of life. Resveratrol (Res) is a natural phytochemical famed for its excellent anti-inflammatory and antioxidant activities. However, it is poorly bioavailable. Thus, a drug delivery system is needed to enhance in vivo bioactivity. Herein, we report the preparation of hyaluronic acid (HA) hydrogels containing resveratrol-loaded chitosan (CS) nanoparticles, their physicochemical analysis, and their potential therapeutic effects in the treatment of AD. Positively charged CS nanoparticles prepared by tripolyphosphate (TPP) gelation showed sizes ranging from 120 to around 500 nm and Res encapsulation efficiency as high as 80%. Embedding the nanoparticles in HA retarded their hydrolytic degradation and also slowed resveratrol release. Resveratrol released from nanoparticle-loaded hydrogel counteracted the oxidative damage induced by ROS generation in TNF-α/INF-γ-treated human keratinocytes (HaCaT) used as an AD in vitro model. Moreover, pre-treatment with Res@gel reduced secretion and gene expression of proinflammatory cytokines in HaCaT cells. The physicochemical analysis and in vitro assay confirmed that the formulated hydrogel could be considered an efficient and sustained resveratrol delivery vector in AD treatment.

Adhesive hydrogels in osteoarthritis: from design to application

Osteoarthritis (OA) is the most common type of degenerative joint disease which affects 7% of the global population and more than 500 million people worldwide. One research frontier is the development of hydrogels for OA treatment, which operate either as functional scaffolds of tissue engineering or as delivery vehicles of functional additives. Both approaches address the big challenge: establishing stable integration of such delivery systems or implants. Adhesive hydrogels provide possible solutions to this challenge. However, few studies have described the current advances in using adhesive hydrogel for OA treatment. This review summarizes the commonly used hydrogels with their adhesion mechanisms and components. Additionally, recognizing that OA is a complex disease involving different biological mechanisms, the bioactive therapeutic strategies are also presented. By presenting the adhesive hydrogels in an interdisciplinary way, including both the fields of chemistry and biology, this review will attempt to provide a comprehensive insight for designing novel bioadhesive systems for OA therapy.

Application of Stichopus hermanni Nanoparticle Gel in the Healing of Traumatic Ulcers

OBJECTIVE

 The aim of this research was to investigate the use of Stichopus herrmanni nanoparticle gel on the ulcer healing process by observing blood vessels, fibroblasts, and Collagen type-I (COL-1) expression on the 4 and 7th days after trauma.

MATERIALS AND METHODS

 Gold sea cucumber (Stichopus herrmanni) powder was processed by freeze-drying method, then by high-energy milling to form nanoparticle size, and then with CMC 2% to make hydrogel. Traumatic ulcers were formed by induction using a burner. Five groups of male Wistar rats, each consisting of six tails, were divided into a negative control group that was given a placebo, the positive control group was given 0.2% hyaluronic acid, and the treatment group was given gold sea cucumbers with concentrations of 0.135, 0.27, and 0.54% (SH1-SH2-SH3). Fibroblast and blood vessels were examined with hematoxylin-eosin on day 3 and 7, while COL-1 expression was examined with immunohistochemistry on day 7. The rats' mucosa was taken on the 3rd and 7th days after the traumatic ulcer was formed.

STATISTICAL ANALYSIS

 The data were analyzed using a one-way analysis of variance followed by a post-hoc test with a p less than 0.05.

RESULTS

 Nanoparticles gel freeze-drying of Stichopus herrmanni increased blood vessels on day 3. Angiogenesis continued to occur, which resulted in increased fibroblast and COL-1 expression on day 7.

CONCLUSIONS

 The application of Stichopus herrmanni nanoparticle gel at 0.27% effectively increased the number of blood vessels, fibroblasts, and COL-1 expression in healing traumatic ulcers.