Colloidal nanocrystal shape and size control: the case of cobalt

A simple procedure for the production of large ferromagnetic cobalt nanoparticles

Epsilon cobalt (ε-Co) nanoparticles in a number of octahedral morphologies have been synthesised. The particles are polycrystalline, with sizes in the order of 30 nm. Magnetic studies reveal the particles are ferromagnetic, with a room temperature saturation magnetisation of 131 emu g(-1). Unlike other large cubic ε-Co syntheses, we have not added an additional co-surfactant. Instead, we have modified the heating regime and reaction agitation. This alternative method highlights the complex chemistry associated with the formation of cobalt nanoparticles by thermal decomposition.

Organic Phase Syntheses of Magnetic Nanoparticles and Their Applications

In the past two decades, the synthetic development of magnetic nanoparticles (NPs) has been intensively explored for both fundamental scientific research and technological applications. Different from the bulk magnet, magnetic NPs exhibit unique magnetism, which enables the tuning of their magnetism by systematic nanoscale engineering. In this review, we first briefly discuss the fundamental features of magnetic NPs. We then summarize the synthesis of various magnetic NPs, including magnetic metal, metallic alloy, metal oxide, and multifunctional NPs. We focus on the organic phase syntheses of magnetic NPs with precise control over their sizes, shapes, compositions, and structures. Finally we discuss the applications of various magnetic NPs in sensitive diagnostics and therapeutics, high-density magnetic data recording and energy storage, as well as in highly efficient catalysis.

Giant Magnetoresistance: Basic Concepts, Microstructure, Magnetic Interactions and Applications

The giant magnetoresistance (GMR) effect is a very basic phenomenon that occurs in magnetic materials ranging from nanoparticles over multilayered thin films to permanent magnets. In this contribution, we first focus on the links between effect characteristic and underlying microstructure. Thereafter, we discuss design criteria for GMR-sensor applications covering automotive, biosensors as well as nanoparticular sensors.

Formation Mechanism of Fe Nanocubes by Magnetron Sputtering Inert Gas Condensation

In this work, we study the formation mechanisms of iron nanoparticles (Fe NPs) grown by magnetron sputtering inert gas condensation and emphasize the decisive kinetics effects that give rise specifically to cubic morphologies. Our experimental results, as well as computer simulations carried out by two different methods, indicate that the cubic shape of Fe NPs is explained by basic differences in the kinetic growth modes of {100} and {110} surfaces rather than surface formation energetics. Both our experimental and theoretical investigations show that the final shape is defined by the combination of the condensation temperature and the rate of atomic deposition onto the growing nanocluster. We, thus, construct a comprehensive deposition rate-temperature diagram of Fe NP shapes and develop an analytical model that predicts the temporal evolution of these properties. Combining the shape diagram and the analytical model, morphological control of Fe NPs during formation is feasible; as such, our method proposes a roadmap for experimentalists to engineer NPs of desired shapes for targeted applications.

Burst nucleation by hot injection for size controlled synthesis of ε-cobalt nanoparticles

Background

Reproducible growth of narrow size distributed ε-Co nanoparticles with a specific size requires full understanding and identification of the role of essential synthesis parameters for the applied synthesis method. For the hot injection methodology, a significant discrepancy with respect to obtained sizes and applied reaction conditions is reported. Currently, a systematic investigation controlling key synthesis parameters as injection-temperature and time, metal to surfactant ratio and reaction holding time in terms of their impact on mean (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\bar{D}$$\end{document}D¯_mean) and median (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\bar{D}$$\end{document}D¯_median) particle diameter using dichlorobenzene (DCB), Co₂(CO)₈ and oleic acid (OA) as the reactant matrix is lacking.

Methods

A series of solution-based ε-Co nanoparticles were synthesized using the hot injection method. Suspensions and obtained particles were analyzed by DLS, ICP-OES, (synchrotron)XRD and TEM. Rietveld refinements were used for structural analysis. Mean (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\bar{D}$$\end{document}D¯_mean) and median (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\bar{D}$$\end{document}D¯_median) particle diameters were calculated with basis in measurements of 250–500 particles for each synthesis. 95 % bias corrected confidence intervals using bootstrapping were calculated for syntheses with three or four replicas.

Results

ε-Co NPs in the size range ~4–10 nm with a narrow size distribution are obtained via the hot injection method, using OA as the sole surfactant. Typically the synthesis yield is ~75 %, and the particles form stable colloidal solutions when redispersed in hexane. Reproducibility of the adopted synthesis procedure on replicate syntheses was confirmed. We describe in detail the effects of essential synthesis parameters, such as injection-temperature and time, metal to surfactant ratio and reaction holding time in terms of their impact on mean (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\bar{D}$$\end{document}D¯_mean) and median (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\bar{D}$$\end{document}D¯_median) particle diameter.

Conclusions

The described synthesis procedure towards ε-Co nanoparticles (NPs) is concluded to be robust when controlling key synthesis parameters, giving targeted particle diameters with a narrow size distribution. We have identified two major synthesis parameters which control particle size, i.e., the metal to surfactant molar ratio and the injection temperature of the hot OA–DCB solution into which the cobalt precursor is injected. By increasing the metal to surfactant molar ratio, the mean particle diameter of the ε-Co NPs has been found to increase. Furthermore, an increase in the injection temperature of the hot OA-DCB solution into which the cobalt precursor is injected, results in a decrease in the mean particle diameter of the ε-Co NPs, when the metal to surfactant molar ratio \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\left( {\frac{[Co]}{[OA]}} \right)$$\end{document}[Co][OA] is fixed at ~12.9.

Electronic supplementary material

The online version of this article (doi:10.1186/s13065-016-0156-1) contains supplementary material, which is available to authorized users.

Co-Cu Nanoparticles: Synthesis by Galvanic Replacement and Phase Rearrangement during Catalytic Activation

The control of the phase distribution in multicomponent nanomaterials is critical to optimize their catalytic performance. In this direction, while impressive advances have been achieved in the past decade in the synthesis of multicomponent nanoparticles and nanocomposites, element rearrangement during catalyst activation has been frequently overseen. Here, we present a facile galvanic replacement-based procedure to synthesize Co@Cu nanoparticles with narrow size and composition distributions. We further characterize their phase arrangement before and after catalytic activation. When oxidized at 350 °C in air to remove organics, Co@Cu core-shell nanostructures oxidize to polycrystalline CuO-Co3O4 nanoparticles with randomly distributed CuO and Co3O4 crystallites. During a posterior reduction treatment in H2 atmosphere, Cu precipitates in a metallic core and Co migrates to the nanoparticle surface to form Cu@Co core-shell nanostructures. The catalytic behavior of such Cu@Co nanoparticles supported on mesoporous silica was further analyzed toward CO2 hydrogenation in real working conditions.

A facile solution-phase synthesis of cobalt phosphide nanorods/hollow nanoparticles

A simple one-step solution-phase synthesis of cobalt phosphide nanorods (NRs) and hollow nanoparticles (NPs) has been reported in this paper. The phase and morphology evolutions of cobalt phosphide were researched by varying the reaction conditions. The detailed research confirms that oleylamine (OAm) in the reaction firstly reduces Co(acac)2 to the Co phase and the reaction between P atoms from TOP and Co atoms results in the Co2P phase. The as-synthesized NRs and NPs show superparamagnetic behavior at room temperature and ferromagnetic properties at 2 K. The current route provides a new and general chemical method for tunable preparation of cobalt phosphide nanostructures, which are important for further magnetic and catalytic studies.

Engineered magnetic core shell nanoprobes: Synthesis and applications to cancer imaging and therapeutics

Magnetic core shell nanoparticles are composed of a highly magnetic core material surrounded by a thin shell of desired drug, polymer or metal oxide. These magnetic core shell nanoparticles have a wide range of applications in biomedical research, more specifically in tissue imaging, drug delivery and therapeutics. The present review discusses the up-to-date knowledge on the various procedures for synthesis of magnetic core shell nanoparticles along with their applications in cancer imaging, drug delivery and hyperthermia or cancer therapeutics. Literature in this area shows that magnetic core shell nanoparticle-based imaging, drug targeting and therapy through hyperthermia can potentially be a powerful tool for the advanced diagnosis and treatment of various cancers.

Exploiting Rayleigh Instability in Creating Parallel Au Nanowires with Exotic Arrangements

New types of nanowire arrangements are explored via active surface growth, where the use of Au seeds at room temperature means that the seed shape has major impacts on the subsequent nanowire growth. When Au nanorods are used as seeds, the original stripe-shape contact line with the substrate (the active surface) splits into a series of circular dots as the result of Rayleigh instability, giving coplanar nanowire bundles. The influence of a solid system by Rayleigh instability is exceptional, permitted by the dynamic active surface. The splitting is driven by the tendency to minimize the surface of the newly emerged nanowire section, whereas Rayleigh instability is responsible for overcoming the kinetic barriers. As a result, the average distance between the nanowires is only a few nanometers, much smaller than conventional lithographic methods. Conical and tubular bundles of nanowires are formed at low seed density, where the excessive growth material available for each seed leads to expansion and splitting of the active surface under the influence of both the diffusion limited growth and Rayleigh instability. Further designs of nanowire-based Au architectures demonstrate the feasibility of combining the multiple control of the system for new synthetic advances.

Stability enhancement of PbSe quantum dots via post-synthetic ammonium chloride treatment for a high-performance infrared photodetector

Infrared (IR) emission lead selenide (PbSe) quantum dots (QDs) have gained considerable attention in the last decade due to their potential applications in optoelectronic devices. However, the comprehensive applications of PbSe QDs have not been realized yet due to their high susceptibility to oxidation in air. In this paper, we demonstrate the stability enhancement of PbSe colloidal QDs via a post-synthetic ammonium chloride treatment and its applications in a solution-processed high-performance IR photodetector with a field-effect transistor (FET) configuration by reversely fabricating the PbSe active layer and polymethylmethacrylate (PMMA) dielectric layer. The responsivity and the specific detectivity of the FET-based photodetector Au(source, drain)/PbSe(52 nm)/PMMA(930 nm)/Au(gate) reached 64.17 mA W(-1) and 5.08 × 10(10) Jones, respectively, under 980 nm laser illumination with an intensity of 0.1 mW cm(-2). Therefore, it provides a promising way to make a high-sensitivity near-IR/mid-IR photodetector.

Manipulating the dimensional assembly pattern and crystalline structures of iron oxide nanostructures with a functional polyolefin

Controlled crystalline structures (α- and γ-phase) and assembly patterns (1-D, 2-D and 3-D) were achieved in the synthesized iron oxide (Fe2O3) nanoparticles (NPs) using polymeric surfactant-polypropylene grafted maleic anhydride (PP-g-MA) with different concentrations. In addition, the change of the crystalline structure from the α- and γ-phase also led to the significantly increased saturation magnetization and coercivity.

Assembly of designed protein scaffolds into monolayers for nanoparticle patterning

The controlled assembly of building blocks to achieve new nanostructured materials with defined properties at different length scales through rational design is the basis and future of bottom-up nanofabrication. This work describes the assembly of the idealized protein building block, the consensus tetratricopeptide repeat (CTPR), into monolayers by oriented immobilization of the blocks. The selectivity of thiol-gold interaction for an oriented immobilization has been verified by comparing a non-thiolated protein building block. The physical properties of the CTPR protein thin biomolecular films including topography, thickness, and viscoelasticity, are characterized. Finally, the ability of these scaffolds to act as templates for inorganic nanostructures has been demonstrated by the formation of well-packed gold nanoparticles (GNPs) monolayer patterned by the CTPR monolayer.

Strong room-temperature blue-violet photoluminescence of multiferroic BaMnF4

BaMnF4 microsheets have been prepared using a hydrothermal method. Strong room-temperature blue-violet photoluminescence has been observed (an absolute luminescence quantum yield of 67%) with two peaks located at 385 nm and 410 nm. More interestingly, photon self-absorption phenomenon has been observed, leading to an unusual abrupt decrease in the luminescence intensity at a wavelength of 400 nm. To understand the underlying mechanism of such emission, the electronic structure of BaMnF4 has been studied using first principles calculations. The observed two peaks are attributed to electron transitions between the upper-Hubbard bands of the Mn's t2g orbitals and the lower-Hubbard bands of the Mn's eg orbitals. The Mott gap mediated d-d orbital transitions may provide additional degrees of freedom to tune the photon generation and absorption in ferroelectrics.

Preparation of broccoli-like ferromagnetic cobalt microstructures with superior coercivity via an aqueous reduction strategy

Controlled synthesis of novel hierarchical cobalt (Co) microstructures with extraordinary magnetic performances is a promising strategy for the development of magnetic metals for industrial purposes.

Magnetic Nanoparticles: Material Engineering and Emerging Applications in Lithography and Biomedicine

We present an interdisciplinary overview of material engineering and emerging applications of iron oxide nanoparticles. We discuss material engineering of nanoparticles in the broadest sense, emphasizing size and shape control, large-area self-assembly, composite/hybrid structures, and surface engineering. This is followed by a discussion of several non-traditional, emerging applications of iron oxide nanoparticles, including nanoparticle lithography, magnetic particle imaging, magnetic guided drug delivery, and positive contrast agents for magnetic resonance imaging. We conclude with a succinct discussion of the pharmacokinetics pathways of iron oxide nanoparticles in the human body -- an important and required practical consideration for any in vivo biomedical application, followed by a brief outlook of the field.

Large-area two-dimensional bismuth selenide crystals synthesized by solution-based control of the nucleation environment

Large-area 2D Bi₂Se₃ crystals are grown by solution-based synthesis, where both seed-mediated growth and chelating agents are used.

Self-supported tungsten/tungsten dioxide nanowires array as an efficient electrocatalyst in the hydrogen evolution reaction

A tungsten/tungsten dioxide nanowires array was constructed on a carbon paper through the thermal annealing of tungsten trioxide, and was proven to be an efficient hydrogen evolution cathode with strong durability in acidic solutions.

Antiferromagnetic coupling between surface and bulk magnetization and anomalous magnetic transport in electro-deposited cobalt film

Correlation of morphology and structure and magnetization depth profiles of Co films grown by two different techniques, e.g. electrodeposition (S1) and sputtering (S2).

A novel nanoscale organic–inorganic hybrid system with significantly enhanced AIE in aqueous media

We report the design and fluorescence properties of a novel aggregation-induced emission (AIE) system obtained by grafting carboxyl group conjugated AIE molecules onto monodispersed colloidal GaOOH nanocubes.

Synthesis of polygonal Co3Sn2 nanostructure with enhanced magnetic properties

A one-pot solvothermal route is employed to fabricate polygonal Co₃Sn₂ nanostructures.

Superior catalytic activity of synthesized triangular silver nanoplates with optimized sizes and shapes

Thin silver nanoplates were found to display superior catalytic activity for the reduction of Rh B.

Hydrothermal synthesis and characterization under dynamic conditions of cobalt oxide nanoparticles supported over magnesium oxide nano-plates

Surface evolution of a nano-catalyst comprised of oxidized Co NPs and MgO nano-plates was studied under O₂, H₂ and H₂ + CO atmospheres using synchrotron-based X-ray spectroscopies.

Surface stabilization determines a classical versus non-classical nucleation pathway during particle formation

In the bottom-up synthesis of nanoparticles, the degree of surface stabilization by the surfactant decides a classical or non-classical formation pathway.

Template-assisted self-assembly of diblock copolymer micelles for non-hexagonal arrays of Au nanoparticles

We report the construction of non-hexagonal arrays of nanoparticles by the template-assisted self-assembly of polystyrene-block-poly(4-vinylpyridine) copolymer micelles.

X-ray spectroscopic and scattering methods applied to the characterisation of cobalt-based Fischer–Tropsch synthesis catalysts

This review aims to critically assess the use of X-ray techniques, both of a scattering (e.g. X-ray diffraction (XRD), pair distribution function (PDF)) and spectroscopic nature (X-ray absorption spectroscopy (XAFS)), in the study of cobalt-based Fisher–Tropsch synthesis (FTS) catalysts.

Magnetoelectricity coupled exchange bias in BaMnF4

Multiferroic BaMnF₄ powder was prepared by hydrothermal method. Hysteretic field dependent magnetization curve at 5 K confirms the weak ferromagnetism aroused from the canted antiferromagnetic spins by magnetoelectric coupling. The blocking temperature of 65 K for exchange bias coincides well with the peak at 65 K in the zero-field cooled temperature-dependent magnetization curve, which has been assigned to the onset temperature of two-dimensional antiferromagnetism. An upturn kink of exchange field and coercivity with decreasing temperature was observed from 40 K to 20 K, which is consistent with the two-dimensional to three-dimensional antiferromagnetic transition at Néel temperature (~26 K). In contrast to the conventional mechanism of magnetization pinned by interfacial exchange coupling in multiphases, the exchange bias in BaMnF₄ is argued to be a bulk effect in single phase, due to the magnetization pinned by the polarization through magnetoelectric coupling.

Nanogap Electrodes towards Solid State Single-Molecule Transistors

With the establishment of complementary metal-oxide-semiconductor (CMOS)-based integrated circuit technology, it has become more difficult to follow Moore's law to further downscale the size of electronic components. Devices based on various nanostructures were constructed to continue the trend in the minimization of electronics, and molecular devices are among the most promising candidates. Compared with other candidates, molecular devices show unique superiorities, and intensive studies on molecular devices have been carried out both experimentally and theoretically at the present time. Compared to two-terminal molecular devices, three-terminal devices, namely single-molecule transistors, show unique advantages both in fundamental research and application and are considered to be an essential part of integrated circuits based on molecular devices. However, it is very difficult to construct them using the traditional microfabrication techniques directly, thus new fabrication strategies are developed. This review aims to provide an exclusive way of manufacturing solid state gated nanogap electrodes, the foundation of constructing transistors of single or a few molecules. Such single-molecule transistors have the potential to be used to build integrated circuits.

Fabrication and Characterization of Monodisperse Magnetic Porous Nickel Microspheres as Novel Catalysts

A facile and efficient hard-templating strategy is reported for the preparation of porous nickel microspheres with excellent uniformity and strong magnetism. The strategy involves impregnation of porous polymer microspheres with nickel precursors, calcination to remove the template, followed by thermal reduction. The morphology, structure, and the property of the Ni microspheres were characterized by scanning electron microscopy, X-ray powder diffraction, N2 adsorption-desorption isotherms, thermogravimetric analysis, and magnetic hysteresis measurement. The obtained porous nickel microspheres were monodispersed with a particle size of 0.91 μm and crystallite size of 52 nm. Their saturation magnetization was much higher than that of Ni nanoparticles. The unique porous nanostructured Ni microspheres possess catalytic activity and excellent recyclability, as demonstrated in the catalytic reduction of 4-nitrophenol to 4-aminophenol. The micropherical Ni catalysts could be easily separated either by an external magnetic field or by simple filtration.

Nanotechnologies for biomedical science and translational medicine

In 2000 the United States launched the National Nanotechnology Initiative and, along with it, a well-defined set of goals for nanomedicine. This Perspective looks back at the progress made toward those goals, within the context of the changing landscape in biomedicine that has occurred over the past 15 years, and considers advances that are likely to occur during the next decade. In particular, nanotechnologies for health-related genomics and single-cell biology, inorganic and organic nanoparticles for biomedicine, and wearable nanotechnologies for wellness monitoring are briefly covered.

Photothermally Induced Optical Property Changes of Poly(N-isopropylacrylamide) Microgel-Based Etalons

Poly(N-isopropylacrylamide) microgel-based optical devices were designed such that they can be stimulated to change their optical properties in response to light produced by a light-emitting diode (LED). The devices were fabricated by sandwiching the synthesized microgels between two Cr/Au layers all supported on a glass coverslip with gold nanoparticles (AuNPs) deposited. Here, we found that these devices can be stimulated to change their optical properties when exposed to green LED light, which excites the AuNPs and increases the local temperature, causing the thermoresponsive microgels to decrease in diameter, resulting in a change in the devices' optical properties. We also found that the sensitivity of the devices to light was more pronounced as the environmental temperature approached the lower critical solution temperature (LCST) for the microgels, although the sensitivity of the devices to light exposure dropped off dramatically as the environmental temperature was increased above the LCST. This was a direct result of the microgels already being in their collapsed state and therefore unable to decrease in diameter any further due to light exposure. Finally, we found that the sensitivity of the devices to light exposure increased with increasing number of AuNP layers in the devices. We anticipate that these devices could be used for drug delivery applications; by using light to stimulate microgel collapse, the microgel-based devices can be stimulated to release small molecules on demand.

Colloidal Nanocrystal Frameworks

Colloidal nanocrystal frameworks (CNFs) are a modular class of mesostructured porous materials, which are assembled from pre-formed nanocrystal building units using suitably designed block copolymer architecture-directing agents. The functional attributes of these frameworks are determined both by the physiochemical characteristics of the nanocrystal components as well as their ordered arrangements in space. It is noteworthy that their assembly schemes are readily amenable to more than one type of framework component, yielding a multivariate landscape to navigate mesoscale phenomena arising from the coupled interactions of different nanocrystals within the framework. Early reports indicate surprisingly efficient propagation of both matter and energy within and along the surfaces of these frameworks, although there remains much to be learned about the origins of their structural, electronic, and dynamic properties, and how they feed back across multiple length and time scales.

Longitudinal domain wall formation in elongated assemblies of ferromagnetic nanoparticles

Through evaporation of dense colloids of ferromagnetic ~13 nm ε-Co particles onto carbon substrates, anisotropic magnetic dipolar interactions can support formation of elongated particle structures with aggregate thicknesses of 100-400 nm and lengths of up to some hundred microns. Lorenz microscopy and electron holography reveal collective magnetic ordering in these structures. However, in contrast to continuous ferromagnetic thin films of comparable dimensions, domain walls appear preferentially as longitudinal, i.e., oriented parallel to the long axis of the nanoparticle assemblies. We explain this unusual domain structure as the result of dipolar interactions and shape anisotropy, in the absence of inter-particle exchange coupling.

Critical phenomena of a single defect

We consider the critical system with a point defect and study the variation of thermodynamic quantities, which are the differences between those with and without the defect. Within renormalization group theory, we show generally that the critical exponent of the internal energy variation is the specific heat exponent of a pure system, and the critical exponent of the heat capacity variation is that for the temperature derivative of specific heat of a pure system. This conclusion is valid for the isotropic systems with a short-range interaction. As an example we solve the two-dimensional Ising model with a point defect numerically. The variations of the free energy, internal energy, and specific heat are calculated with the bond propagation algorithm. At the critical point, the internal energy variation diverges with the lattice size logarithmically and the heat capacity variation diverges with size linearly. Near the critical point, the internal energy variation behaves as ln|t| and the heat capacity variation behaves as |t|^{-1}, where t is the reduced temperature.

Synthesis and X-ray Characterization of Cobalt Phosphide (Co2P) Nanorods for the Oxygen Reduction Reaction

Low temperature fuel cells are clean, effective alternative fuel conversion technology. Oxygen reduction reaction (ORR) at the fuel cell cathode has required Pt as the electrocatalyst for high activity and selectivity of the four-electron reaction pathway. Targeting a less expensive, earth abundant alternative, we have developed the synthesis of cobalt phosphide (Co2P) nanorods for ORR. Characterization techniques that include total X-ray scattering and extended X-ray absorption fine structure revealed a deviation of the nanorods from bulk crystal structure with a contraction along the b orthorhombic lattice parameter. The carbon supported nanorods have comparable activity but are remarkably more stable than conventional Pt catalysts for the oxygen reduction reaction in alkaline environments.