Electric Control of Droplets in Microfluidic Devices

Controlled dispensing and mixing of pico- to nanoliter volumes using on-demand droplet-based microfluidics

We present an integrated droplet-on-demand microfluidic platform for dispensing, mixing, incubating, extracting and analyzing by mass spectrometry pico- to nanoliter-sized droplets. All of the functional components are successfully integrated for the first time into a monolithic microdevice. Droplet generation is accomplished using computer-controlled pneumatic valves. Controlled actuation of valves for different aqueous streams enables accurate dosing and rapid mixing of reagents within droplets in either the droplet generation area or in a region of widening channel cross-section. Following incubation, which takes place as droplets travel in the oil stream, the droplet contents are extracted to an aqueous channel for subsequent ionization at an integrated nanoelectrospray emitter. Using the integrated platform, rapid enzymatic digestions of a model protein were carried out in droplets and detected on-line by nanoelectrospray ionization mass spectrometry.

An on-chip, multichannel droplet sorter using standing surface acoustic waves

The emerging field of droplet microfluidics requires effective on-chip handling and sorting of droplets. In this work, we demonstrate a microfluidic device that is capable of sorting picoliter water-in-oil droplets into multiple outputs using standing surface acoustic waves (SSAW). This device integrates a single-layer microfluidic channel with interdigital transducers (IDTs) to achieve on-chip droplet generation and sorting. Within the SSAW field, water-in-oil droplets experience an acoustic radiation force and are pushed toward the acoustic pressure node. As a result, by tuning the frequency of the SSAW excitation, the position of the pressure nodes can be changed and droplets can be sorted to different outlets at rates up to 222 droplets s(-1). With its advantages in simplicity, controllability, versatility, noninvasiveness, and capability to be integrated with other on-chip components such as droplet manipulation and optical detection units, the technique presented here could be valuable for the development of droplet-based micro total analysis systems (μTAS).

The future is now: single-cell genomics of bacteria and archaea

Interest in the expanding catalog of uncultivated microorganisms, increasing recognition of heterogeneity among seemingly similar cells, and technological advances in whole-genome amplification and single-cell manipulation are driving considerable progress in single-cell genomics. Here, the spectrum of applications for single-cell genomics, key advances in the development of the field, and emerging methodology for single-cell genome sequencing are reviewed by example with attention to the diversity of approaches and their unique characteristics. Experimental strategies transcending specific methodologies are identified and organized as a road map for future studies in single-cell genomics of environmental microorganisms. Over the next decade, increasingly powerful tools for single-cell genome sequencing and analysis will play key roles in accessing the genomes of uncultivated organisms, determining the basis of microbial community functions, and fundamental aspects of microbial population biology.

Electrostatic charging and control of droplets in microfluidic devices

Precharged droplets can facilitate manipulation and control of low-volume liquids in droplet-based microfluidics. In this paper, we demonstrate non-contact electrostatic charging of droplets by polarizing a neutral droplet and splitting it into two oppositely charged daughter droplets in a T-junction microchannel. We performed numerical simulation to analyze the non-contact charging process and proposed a new design with a notch at the T-junction in aid of droplet splitting for more efficient charging. We experimentally characterized the induced charge in droplets in microfabricated devices. The experimental results agreed well with the simulation. Finally, we demonstrated highly effective droplet manipulation in a path selection unit appending to the droplet charging. We expect our work could enable precision manipulation of droplets for more complex liquid handling in microfluidics and promote electric-force based manipulation in 'lab-on-a-chip' systems.

Droplet-based microfluidics

Droplet-based microfluidics or digital microfluidics is a subclass of microfluidic devices, wherein droplets are generated using active or passive methods. The active method for generation of droplets involves the use of an external factor such as an electric field for droplet generation. Two techniques that fall in this category are dielectrophoresis (DEP) and electrowetting on dielectric (EWOD). In passive methods, the droplet generation depends on the geometry and dimensions of the device. T-junction and flow focusing methods are examples of passive methods used for generation of droplets. In this chapter the methods used for droplet generation, mixing of contents of droplets, and the manipulation of droplets are described in brief. A review of the applications of digital microfluidics with emphasis on the last decade is presented.

Active structuring of colloidal armour on liquid drops

Adsorption and assembly of colloidal particles at the surface of liquid droplets are at the base of particle-stabilized emulsions and templating. Here we report that electrohydrodynamic and electro-rheological effects in leaky-dielectric liquid drops can be used to structure and dynamically control colloidal particle assemblies at drop surfaces, including electric-field-assisted convective assembly of jammed colloidal 'ribbons', electro-rheological colloidal chains confined to a two-dimensional surface and spinning colloidal domains on that surface. In addition, we demonstrate the size control of 'pupil'-like openings in colloidal shells. We anticipate that electric field manipulation of colloids in leaky dielectrics can lead to new routes of colloidosome assembly and design for 'smart armoured' droplets.

Bistability in droplet traffic at asymmetric microfluidic junctions

We present the first experimental demonstration of confined microfluidic droplets acting as discrete negative resistors, wherein the effective hydrodynamic resistance to flow in a microchannel is reduced by the presence of a droplet. The implications of this hitherto unexplored regime in the traffic of droplets in microfluidic networks are highlighted by demonstrating bistable filtering into either arm of symmetric and asymmetric microfluidic loops, and programming oscillatory droplet routing therein.

Multiple and high-throughput droplet reactions via combination of microsampling technique and microfluidic chip

Microdroplets offer unique compartments for accommodating a large number of chemical and biological reactions in tiny volume with precise control. A major concern in droplet-based microfluidics is the difficulty to address droplets individually and achieve high throughput at the same time. Here, we have combined an improved cartridge sampling technique with a microfluidic chip to perform droplet screenings and aggressive reaction with minimal (nanoliter-scale) reagent consumption. The droplet composition, distance, volume (nanoliter to subnanoliter scale), number, and sequence could be precisely and digitally programmed through the improved sampling technique, while sample evaporation and cross-contamination are effectively eliminated. Our combined device provides a simple model to utilize multiple droplets for various reactions with low reagent consumption and high throughput.

Automated generation of libraries of nL droplets

We demonstrate an integrated system for rapid and automated generation of multiple, chemically distinct populations of ~10(3)-10(4) sub-nanoliter droplets. Generation of these 'libraries of droplets' proceeds in the following automated steps: i) generation of a sequence of micro-liter droplets of individually predetermined composition, ii) injection of these 'parental' droplets onto a chip, iii) transition from a mm- to a μm-scale of the channels and splitting each of the parental drops with a flow-focusing module into thousands of tightly monodisperse daughter drops and iv) separation of such formed homogeneous populations with plugs of a third immiscible fluid. This method is compatible both with aspiration of microliter portions of liquid from a 96-well plate with a robotic station and with automated microfluidic systems that generate (~μL) droplets of preprogrammed compositions. The system that we present bridges the techniques that provide elasticity of protocols executed on microliter droplets with the techniques for high-throughput screening of small (~pL, ~nL) droplet libraries. The method that we describe can be useful in exploiting the synergy between the ability to rapidly screen distinct chemical environments and to perform high-throughput studies of single cells or molecules and in digital droplet PCR systems.

Fusion and sorting of two parallel trains of droplets using a railroad-like channel network and guiding tracks

We propose a robust droplet fusion and sorting method for two parallel trains of droplets that is relatively insensitive to frequency and phase mismatch. Conventional methods of droplet fusion require an extremely precise control of aqueous/oil flows for perfect frequency matching between two trains of droplets. In this work, by combining our previous two methods (i.e., droplet synchronization using railroad-like channels and manipulation of shape-dependent droplets using guiding tracks), we realized an error-free droplet fusion/sorting device for the two parallel trains of droplets. If droplet pairs are synchronized through a railroad-like channel, they are electrically fused and the fused droplets transit to a middle guiding track to flow in a middle channel; otherwise non-synchronized non-fused droplets will be discarded into the side waste channels by flowing through their own guiding tracks. The simple droplet synchronization, fusion, and sorting technology will have widespread application in droplet-based chemical or biological experiments, where two trains of the chemically or biologically treated or pre-formed droplets yield a train of 100% one-to-one fused droplets at the desired outlet channel by sorting all the non-synchronized non-fused droplets into waste outlets.

Force driven separation of drops by deterministic lateral displacement

We investigate the separation of drops in force-driven deterministic lateral displacement (f-DLD), a promising high-throughput continuous separation method in microfluidics. We perform scaled-up macroscopic experiments in which drops settle through a square array of cylindrical obstacles. These experiments demonstrate the separation capabilities-and provide insight for the design-of f-DLD for drops of multiple sizes, including drops that are larger than the gaps between cylinders and exhibit substantial deformation as they move through the array. We show that for any orientation of the driving force relative to the array of obstacles, the trajectories of the drops follow selected locking directions in the lattice. We also found that a simple collision model accurately describes the average migration angles of the drops for the entire range of sizes investigated here, and for all forcing directions. In addition, we found a difference of approximately 20° between the critical angles at which the smallest and largest drops first move across a line of obstacles (column) in the array, a promising result in terms of potential size resolution of this method. Finally, we demonstrate that a single line of cylindrical obstacles rotated with respect to the driving force is capable of performing binary separations. The critical angles obtained in such single line experiments, moreover, agree with those obtained using the full array, thus validating the assumption in which the trajectory (and average migration angle) of the drops is calculated from individual obstacle-drop collisions.

Building droplet-based microfluidic systems for biological analysis

In the present paper, we review and discuss current developments and challenges in the field of droplet-based microfluidics. This discussion includes an assessment of the basic fluid dynamics of segmented flows, material requirements, fundamental unit operations and how integration of functional components can be applied to specific biological problems.

Capillary fractionation of HPLC substrates by a microfluidic droplet generator for high throughput analysis

Biochemical samples are complex mixtures containing 1000's of components which often must be fractionated prior to analysis. Conventional fraction collectors, which can only accommodate 10's of fractions, are not well suited for high throughput analysis. This paper describes microfractionation in droplets (μFD), a scalable microfluidic technique for generating thousands of fractions. A drop generator, placed downstream from a high performance liquid chromatography (HPLC) column, encapsulates the separated components into a serial array of monodisperse droplets. The droplets can be stored in a capillary or immediately used in subsequent assays. Using μFD, a mixture of 3 dyes separated in a C18 column was fractionated into 2,160 droplets in <6 min. The volume and frequency of the droplet fractions are governed by the capillary number (Ca), which depends on the viscosity of the carrier fluid, flow rate, and interfacial tension. With HPLC-compatible flow rates of 0.38-0.7 mL/min, in a 1.5 mm Teflon capillary, fractions contain volumes of 1-6 μL and are generated at 2-10 drops/s. Droplet fractions can be mixed with a subsequent reagent using a downstream tee junction. In theory, μFD can be coupled to a wide variety of separation processes, enabling high throughput fractionation and screening of complex mixtures in μL to sub-nL volumes.

Microfluidic chemical analysis systems

The field of microfluidics has exploded in the past decade, particularly in the area of chemical and biochemical analysis systems. Borrowing technology from the solid-state electronics industry and the production of microprocessor chips, researchers working with glass, silicon, and polymer substrates have fabricated macroscale laboratory components in miniaturized formats. These devices pump nanoliter volumes of liquid through micrometer-scale channels and perform complex chemical reactions and separations. The detection of reaction products is typically done fluorescently with off-chip optical components, and the analysis time from start to finish can be significantly shorter than that of conventional techniques. In this review we describe these microfluidic analysis systems, from the original continuous flow systems relying on electroosmotic pumping for liquid motion to the large diversity of microarray chips currently in use to the newer droplet-based devices and segmented flow systems. Although not currently widespread, microfluidic systems have the potential to become ubiquitous.

Microfluidic platform for combinatorial synthesis in picolitre droplets

This paper presents a droplet-based microfluidic platform for miniaturized combinatorial synthesis. As a proof of concept, a library of small molecules for early stage drug screening was produced. We present an efficient strategy for producing a 7 × 3 library of potential thrombin inhibitors that can be utilized for other combinatorial synthesis applications. Picolitre droplets containing the first type of reagent (reagents A(1), A(2), …, A(m)) were formed individually in identical microfluidic chips and then stored off chip with the aid of stabilizing surfactants. These droplets were then mixed to form a library of droplets containing reagents A(1-m), each individually compartmentalized, which was reinjected into a second microfluidic chip and combinatorially fused with picolitre droplets containing the second reagent (reagents B(1), B(2), …, B(n)) that were formed on chip. The concept was demonstrated with a three-component Ugi-type reaction involving an amine (reagents A(1-3)), an aldehyde (reagents B(1-7)), and an isocyanide (held constant), to synthesize a library of small molecules with potential thrombin inhibitory activity. Our technique produced 10(6) droplets of each reaction at a rate of 2.3 kHz. Each droplet had a reaction volume of 3.1 pL, at least six orders of magnitude lower than conventional techniques. The droplets can then be divided into aliquots for different downstream screening applications. In addition to medicinal chemistry applications, this combinatorial droplet-based approach holds great potential for other applications that involve sampling large areas of chemical parameter space with minimal reagent consumption; such an approach could be beneficial when optimizing reaction conditions or performing combinatorial reactions aimed at producing novel materials.

Single-molecule emulsion PCR in microfluidic droplets

The application of microfluidic droplet PCR for single-molecule amplification and analysis has recently been extensively studied. Microfluidic droplet technology has the advantages of compartmentalizing reactions into discrete volumes, performing highly parallel reactions in monodisperse droplets, reducing cross-contamination between droplets, eliminating PCR bias and nonspecific amplification, as well as enabling fast amplification with rapid thermocycling. Here, we have reviewed the important technical breakthroughs of microfluidic droplet PCR in the past five years and their applications to single-molecule amplification and analysis, such as high-throughput screening, next generation DNA sequencing, and quantitative detection of rare mutations. Although the utilization of microfluidic droplet single-molecule PCR is still in the early stages, its great potential has already been demonstrated and will provide novel solutions to today's biomedical engineering challenges in single-molecule amplification and analysis.

A completely in vitro ultrahigh-throughput droplet-based microfluidic screening system for protein engineering and directed evolution

In vitro screening systems based on the coupled transcription and translation of genes using cell-free systems have a number of attractive features for protein engineering and directed evolution. We present a completely in vitro ultrahigh-throughput screening platform using droplet-based microfluidics. Single genes are compartmentalized in aqueous droplets, dispersed in inert carrier oil, and amplified using the polymerase chain reaction (PCR). After amplification, the droplets, now containing 30,000 copies of each gene, are fused one-to-one with droplets containing a cell-free coupled transcription-translation (IVTT) system and the reagents for a fluorogenic assay. Fluorescence-activated electrocoalescence with an aqueous stream is then used to selectively recover genes from droplets containing the desired activity. We demonstrate, by selecting mixtures of lacZ genes encoding the enzyme β-galactosidase and lacZmut genes encoding an inactive variant, that this system can sort at 2000 droplets s(-1): lacZ genes were enriched 502-fold from a 1 : 100 molar ratio of lacZ : lacZmut genes. Indeed, the false positive and false negative error rates were both <0.004 and the results indicate that enrichment is not limited by the sorting efficiency, but by the co-encapsulation of multiple genes in droplets, which is described by the Poisson distribution. Compared to screening using microtiter plate-based systems, the volume and cost of PCR and IVTT reagents are reduced by almost 10(5)-fold, allowing the screening of 10(6) genes using only 150 μL of reagents.

Filtering microfluidic bubble trains at a symmetric junction

We report how a nominally symmetric microfluidic junction can be used to sort all bubbles of an incoming train exclusively into one of its arms. The existence of this "filter" regime is unexpected, given that the junction is symmetric. We analyze this behavior by quantifying how bubbles modulate the hydrodynamic resistance in microchannels and show how speeding up a bubble train whilst preserving its spatial periodicity can lead to filtering at a nominally symmetric junction. We further show how such an asymmetric traffic of bubble trains can be triggered in symmetric geometries by identifying conditions wherein the resistance to flow decreases with an increase in the number of bubbles in the microchannel and derive an exact criterion to predict the same.

Thermocapillary migration in small-scale temperature gradients: application to optofluidic drop dispensing

We experimentally investigate the thermocapillary migration induced by local laser heating of the advancing front of a growing droplet confined in a microfluidic channel. When heating implies an effective increase in interfacial tension, the laser behaves as a "soft door" whose stiffness can be tuned via the optical parameters (beam power and waist). The light-driven thermocapillary velocity of a growing droplet, which opposes the basic flow, is characterized for different types of fluid injection, either pressure or flow rate driven, and various channel aspect ratios. Measurements are interpreted using a simplified model for the temperature gradient at the interface, based on a purely diffusive, three-layer system. Considering the mean temperature gradient, we demonstrate that the classical large-scale temperature gradient behavior is retrieved in the opposite case when the thermal gradient length scale is smaller than the droplet size. We also demonstrate that the thermocapillary velocity is proportional to the smallest droplet curvature imposed by the channel confinement. This suggests that the thermocapillary velocity is in fact proportional to the mean temperature gradient and to the largest interface curvature radius, which both coincide with the imposed one and the spherical droplet radius in large-scale and unconfined situations. Furthermore, as used surfactant concentrations are largely above the critical micelle concentration, we propose a possible explanation, relying on state-of-the-art considerations on high-concentration surfactant-covered interfaces for the observed effective increase in interfacial tension with temperature. We also propose a mechanism for explaining the blocking effect at the scaling-law level. This mechanism involves the temporal evolution of hydrodynamic and thermocapillary forces, based on experimental observations. We finally show that this optocapillary interaction with a microfluidic droplet generator allows for controlling either the flow rate (valve) or the droplet size (sampler), depending on the imposed fluid injection conditions.

Fluorescence detection of single guest molecules in ultrasmall droplets of nonpolar solvent

We have investigated emissive behaviours of individual perylenebisimide derivatives, N,N'-dipropyl-1,6,7,12-tetrakis(4-tert-butylphenoxy)-3,4,9,10-perylenetetra-carboxydiimide (BP-PDI), in single ultrasmall droplets of n-octane at room temperature by using confocal and wide-field microscopic techniques. Single BP-PDIs in the small droplets show no distinguishable blinking in the time courses of fluorescence intensity. This is attributed to small probabilities of the formation of the long-lived ionized state leading to the off-state of the fluorescence. Temporal change in the degree of polarization of fluorescence and wide-field fluorescence images indicated short-time adsorption of the fluorescent molecules at the interfaces between n-octane and watery environments. Fluorescence correlation spectroscopy revealed that the adsorption/desorption processes took place at least in two different time scales, probably due to the difference in the adsorption geometry and/or in the interaction, such as van der Waals interaction and hydrogen bonding, between the dye and the interface.

Droplet microfluidics for single-cell analysis

This book chapter aims at providing an overview of all the aspects and procedures needed to develop a droplet-based workflow for single-cell analysis (see Fig. 10.1). The surfactant system used to stabilize droplets is a critical component of droplet microfluidics; its properties define the type of droplet-based assays and workflows that can be developed. The scope of this book chapter is limited to fluorinated surfactant systems that have proved to generate extremely stable droplets and allow to easily retrieve the encapsulated material. The formulation section discusses how the experimental parameters influence the choice of the surfactant system to use. The circuit design section presents recipes to design and integrate different droplet modules into a whole assay. The fabrication section describes the manufacturing of microfluidic chip including the surface treatment which is pivotal in droplet microfluidics. Finally, the last section reviews the experimental setup for fluorescence detection with an emphasis on cell injection and incubation.

Droplet based microfluidics

Droplet based microfluidics is a rapidly growing interdisciplinary field of research combining soft matter physics, biochemistry and microsystems engineering. Its applications range from fast analytical systems or the synthesis of advanced materials to protein crystallization and biological assays for living cells. Precise control of droplet volumes and reliable manipulation of individual droplets such as coalescence, mixing of their contents, and sorting in combination with fast analysis tools allow us to perform chemical reactions inside the droplets under defined conditions. In this paper, we will review available drop generation and manipulation techniques. The main focus of this review is not to be comprehensive and explain all techniques in great detail but to identify and shed light on similarities and underlying physical principles. Since geometry and wetting properties of the microfluidic channels are crucial factors for droplet generation, we also briefly describe typical device fabrication methods in droplet based microfluidics. Examples of applications and reaction schemes which rely on the discussed manipulation techniques are also presented, such as the fabrication of special materials and biophysical experiments.

Real-time luminescence-based colorimetric determination of double-strand DNA in droplet on demand

We have developed a new luminescence-based colorimetric droplet platform for the determination of double-stranded DNAs (dsDNA). This colorimetric sensor was realized via choosing a fluorescent ensemble probe comprising water-soluble N-acetylcysteine-capped CdTe quantum dots (QDs) and Ru(bpy)(2)(dppx)(2+) (Ru). To provide a convenient and low cost droplet platform for colorimetry, the microvalve technique was adapted to adjust droplet size precisely, achieve the desired fusion of multiple droplets and trap droplets on demand, as well as implement concentration gradients of DNA on a single chip. In the colorimetric sensor, Ru served as both an effective quencher for QDs and a reporter for dsDNA. With increasing concentration of dsDNA, a gradually enhanced color response was observed because of the competition of dsDNA with QDs for Ru. Under the optimum conditions, this biosensing system exhibited not only good sensitivity and specificity for calf thymus DNA with the detection limit of 1.0 pg, but also coincident performances in diluted human serum with the detection limit of 0.9 pg. The droplet biosensor provides a highly efficient, rapid and visual method for dsDNA analysis. The colorimetric droplet platform could be useful as a simple research tool for the study of limited and precious regents such as protein and virus samples, etc.

A microfluidic device for self-synchronised production of droplets

The primary requirement for a mixing operation in droplet-based microfluidic devices is an accurate pairing of droplets of reaction fluids over an extended period of time. In this paper, a novel device for self-synchronous production of droplets has been demonstrated. The device uses a change in impedance across a pair of electrodes introduced due to the passage of a pre-formed droplet to generate a second droplet at a second pair of electrodes. The device was characterised using image analysis. Droplets with a volume of ~23.5 ± 3.1 nl (i.e.~93% of the volume of pre-formed droplets) were produced on applying a voltage of 500 V. The synchronisation efficiency of the device was 83%. As the device enables self-synchronised production of droplets, it has a potential to increase the reliability and robustness of mixing operations in droplet-based microfluidic devices.

Coalescence-assisted generation of single nanoliter droplets with predefined composition

We demonstrate the generation of highly accurate nanoliter droplets with a predefined composition. This composition control over a single droplet is achieved by merging two droplets with known concentrations and defined volumes. A forced coalescence is accomplished by synchronizing two piezoelectric-based active droplet generators. A microscope-mounted CCD camera is used to record, quantify and monitor the process to assure its high fidelity. The device is disposable, surfactant free, simple to operate and does not require microelectrode fabrication. It delivers a single on-demand droplet with adjustable high resolution mixing ratios up to 9 at a volume range of 1-10 nanoliters. The presented platform offers, for the first time, a means to perform droplet-based high-throughput screening in the nanoliter range.

Engineering superlyophobic surfaces as the microfluidic platform for droplet manipulation

We propose robust engineering superlyophobic surfaces (SLS) as a universal microfluidic platform for droplet manipulation enabling electric actuation, featured with characteristics of highly nonwetting, low adhesion, and low friction for various liquids including water and oil. To functionalize SLS with embedded electrodes, two configurations with continuous and discrete topologies have been designed and compared. The discrete configuration is found to be superior upon comparison of their fabrication, microstructures and nonwetting performances. We also present new formulation of SLS pressure stability for linear, square and hexagonal pattern layouts, and propose a criterion for three wetting states (the Cassie-Baxter, partial Cassie-Baxter and Wenzel states) by introducing two dimensionless parameters, which are supported by our experimental data. Droplet manipulation experiments including deformation and transport on electrode-embedded SLS were performed, showing that present SLS reduce adhesion and flow resistance of oil droplets respectively by 98% and 73% compared with a smooth hydrophobic surface, and the excellent hydrodynamic performances are applicable for a wide range of droplet velocity. Simulation of an oil droplet electrically actuated on SLS predicts the significantly increased droplet motion for a low solid fraction and a relatively large droplet size.

Photoreversible fragmentation of a liquid interface for micro-droplet generation by light actuation

We describe a method to induce by light a reversible switch from a continuous two-phase laminar flow to a droplet generating regime, in microfluidic devices with a usual water-in-oil flow focusing geometry. It consists in adding a photosensitive surfactant to the aqueous phase to modulate using light the interfacial energy between flowing liquids and the microfluidic substrate. We show that UV irradiation induces liquid fragmentation into monodisperse water microdroplets and that many cycles of reversible and rapid switches (<2 s) between continuous laminar flows and stable droplet regimes can be realized. By spatially controlling the application of the light stimulus, we also demonstrate the first spatially resolved remote induction of droplet generation.

Micro/nanofabricated environments for synthetic biology

A better understanding of how confinement, crowding and reduced dimensionality modulate reactivity and reaction dynamics will aid in the rational and systematic discovery of functionality in complex biological systems. Artificial microfabricated and nanofabricated structures have helped elucidate the effects of nanoscale spatial confinement and segregation on biological behavior, particularly when integrated with microfluidics, through precise control in both space and time of diffusible signals and binding interactions. Examples of nanostructured interfaces for synthetic biology include the development of cell-like compartments for encapsulating biochemical reactions, nanostructured environments for fundamental studies of diffusion, molecular transport and biochemical reaction kinetics, and regulation of biomolecular interactions as functions of microfabricated and nanofabricated topological constraints.

On-demand electrostatic droplet charging and sorting

This study reports a droplet-based microfluidic device for on-demand electrostatic droplet charging and sorting. This device combines two independent modules: one is a hydrodynamic flow focusing structure to generate water-in-oil droplets, and the other is the two paired-electrodes for charging and sorting of the droplets. Depending on the polarity on charging electrodes, water-in-oil droplets can be electrostatically charged positively or negatively, followed by automatic real-time electric sorting. This approach will be useful when preformed droplets, with a positive, a negative, or with no charge, need to be manipulated for further on-chip droplet manipulation.

Droplet microfluidics for the study of artificial cells

In this review, we describe recent advances in droplet-based microfluidics technology that can be applied in studies of artificial cells. Artificial cells are simplified models of living cells and provide valuable model platforms designed to reveal the functions of biological systems. The study of artificial cells is promoted by microfluidics technologies, which provide control over tiny volumes of solutions during quantitative chemical experiments and other manipulations. Here, we focus on current and future trends in droplet microfluidics and their applications in studies of artificial cells.

Droplets formation and merging in two-phase flow microfluidics

Two-phase flow microfluidics is emerging as a popular technology for a wide range of applications involving high throughput such as encapsulation, chemical synthesis and biochemical assays. Within this platform, the formation and merging of droplets inside an immiscible carrier fluid are two key procedures: (i) the emulsification step should lead to a very well controlled drop size (distribution); and (ii) the use of droplet as micro-reactors requires a reliable merging. A novel trend within this field is the use of additional active means of control besides the commonly used hydrodynamic manipulation. Electric fields are especially suitable for this, due to quantitative control over the amplitude and time dependence of the signals, and the flexibility in designing micro-electrode geometries. With this, the formation and merging of droplets can be achieved on-demand and with high precision. In this review on two-phase flow microfluidics, particular emphasis is given on these aspects. Also recent innovations in microfabrication technologies used for this purpose will be discussed.

Droplet size based separation by deterministic lateral displacement-separating droplets by cell--induced shrinking

We present a novel method for passive separation of microfluidic droplets by size at high throughput using deterministic lateral displacement (DLD). We also show that droplets containing Saccharomyces cerevisiae shrink significantly during incubation while droplets containing only yeast media retain or slightly increase their size. We demonstrate the DLD device by sorting out shrunken yeast-cell containing droplets from 31% larger diameter droplets which were generated at the same time containing only media, present at a >40-fold excess. This demonstrates the resolving power of droplet separation by DLD and establishes that droplets can be separated for a biological property of the droplet contents discriminated by a change of the physical properties of the droplet. Thus suggesting that this technique may be used for e.g. clonal selection. The same device also separates 11 µm from 30 µm droplets at a rate of 12,000 droplets per second, more than twofold faster than previously demonstrated passive hydrodynamic separation devices.

A microfluidic platform for on-demand formation and merging of microdroplets using electric control

We discuss a microfluidic system in which (programmable) local electric fields originating from embedded and protected electrodes are used to control the formation and merging of droplets in a microchannel. The creation of droplets-on-demand (DOD) is implemented using the principle of electrowetting. Combined with hydrodynamic control, the droplet size and formation frequency can be varied independently. Using two synchronized DOD injectors, merging-on-demand (MOD) is achieved via electrocoalescence. The efficiency of MOD is 98% based on hundreds of observations. These two functionalities can be activated independently.

Hydrophilic polycarbonate for generation of oil in water emulsions in microfluidic devices

This report details the method for rendering hydrophilic surfaces of microchannels fabricated in polycarbonate (PC). We characterize the wetting properties and stability of the hydrophilic character of two coatings--one formed by a layer of poly(allylamine) (PAH*) and the second including an additional layer of poly(styrene-sulfonate) (PSS). This second (PC-PAH/PSS) coating yields highly hydrophilic surface that is stable against weeks of exposure to various fluids including organic oils. This coating allows for stable generation of oil-in-water emulsions of hydrocarbon, silicone and fluorinated oils without the use of surfactants and over days of continuous use.

Controlling the contents of microdroplets by exploiting the permeability of PDMS

A microfluidic device capable of exploiting the permeability of small molecules through polydimethylsiloxane (PDMS) has been fabricated in order to control the contents of microdroplets stored in storage wells. We demonstrate that protein precipitation and crystallization can be triggered by delivery of ethanol from a reservoir channel, thus controlling the protein solubility in microdroplets. Likewise quorum sensing in bacteria was triggered by delivery of the auto-inducer N-(3-oxododecanoyl)-l-homoserine lactone (OdDHL) through the PDMS membrane of the device.