Alginate in Wound Dressings

Sodium Alginate as a Pharmaceutical Excipient: Novel Applications of a Well-known Polymer

Alginates are naturally occurring polymers revealing low toxicity, good biocompatibility and biodegradability, excellent gelling and thickening properties, as well as low production cost and good availability. One of the most important features typical for alginates is the ability to undergo ionotropic gelation which is gel formation process occurring upon the contact with cations. Because of their advantageous properties, alginates have been extensively utilized in food and pharmaceutical industries. In this review the current knowledge regarding the most recent studies involving both popularly applied dosage forms, like tablets or hydrogels, and novel advanced drug delivery systems applied in targeted therapies are summarized and discussed. The presented studies indicate that although sodium alginate is a well-established polymer, it is still widely applied as pharmaceutical excipient and the presented research studies indicate that there are still research areas that can be explored and provide innovation in drug delivery systems.

Microencapsulated sodium fusidate to impart antibacterial properties into cotton dressings for traumatic wounds

This research aimed to investigate the use of microencapsulated sodium fusidate to impart antibacterial properties into conventional cotton gauze used to treat traumatic wounds. The microcapsules were prepared with sodium fusidate dissolved in ethanol as the active substance (core) and calcium alginate as the wall material (shell) using an electrospraying method. The microcapsules were then loaded into a 1% solution of chitosan, and conventional sterile cotton gauze fabric was impregnated in this suspension and dried at room temperature. The microcapsules obtained were examined with Fourier transform infrared spectroscopy to confirm the constituents, and by scanning electron microscopy to examine the size and distribution of the microcapsules. The results showed that microcapsules with sodium fusidate as the core material were produced in a size range of 50-200µm. The antibacterial properties of these gauze samples were tested for resistance to both Gram-positive and Gram-negative bacteria. The samples showed antibacterial properties against Gram-positive bacteria (Staphylococcus aureus) only, with an average inhibition zone of 31.67±2.89mm in diameter. The antibacterial effect of the treated gauze samples was tested after washing to investigate the strength of the binding agent, to find out whether the samples maintained antibacterial properties after two hand-rubbed washes. Its absorption capacity, rate of absorbency and air permeability values were 555±4.51%, 1.25±0.04 seconds and 408±2.65cm³/cm²/seconds, respectively. The research findings have established the possibility of imparting antibacterial properties into sterile cotton gauze using microencapsulation of sodium fusidate.

A review on Biopolymer-derived Electrospun Nanofibers for Biomedical and Antiviral Applications

Unique aspects of polymer-derived nanofibers provide significant potential in the area of biomedical and health care applications. Much research has demonstrated several plausible nanofibers to overcome the modern-day challenges in...

Self-healing polysaccharide-based injectable hydrogels with antibacterial activity for wound healing

Because the wound is difficult to heal, repeated bacterial infection will lead to complex clinical problems. Therefore, it is necessary to find an effective method to strengthen the healing process and resist bacterial infection. Hydrogels have many advantages, such as injectability and self-healing under physiological conditions, so they have been widely studied in recent years. Hydrogels can keep the wound moist and promote the wound healing. In addition, the growth of bacteria can be obviously inhibited by hydrogels themself or by doping some antibacterial active substances. Based on this, herein, this review highlighted the preparation and properties of different polysaccharide-based injectable hydrogels, and discuss their biological applications in antibacterial therapy for wound healing in recent years.

Competitive Biosynthesis of Bacterial Alginate Using Azotobacter vinelandii 12 for Tissue Engineering Applications

This study investigated the effect of various cultivation conditions (sucrose/phosphate concentrations, aeration level) on alginate biosynthesis using the bacterial producing strain Azotobacter vinelandii 12 by the full factorial design (FFD) method and physicochemical properties (e.g., rheological properties) of the produced bacterial alginate. We demonstrated experimentally the applicability of bacterial alginate for tissue engineering (the cytotoxicity testing using mesenchymal stem cells (MSCs)). The isolated synthesis of high molecular weight (Mw) capsular alginate with a high level of acetylation (25%) was achieved by FFD method under a low sucrose concentration, an increased phosphate concentration, and a high aeration level. Testing the viscoelastic properties and cytotoxicity showed that bacterial alginate with a maximal Mw (574 kDa) formed the densest hydrogels (which demonstrated relatively low cytotoxicity for MSCs in contrast to bacterial alginate with low Mw). The obtained data have shown promising prospects in controlled biosynthesis of bacterial alginate with different physicochemical characteristics for various biomedical applications including tissue engineering.

Immunomodulatory effects of polysaccharides from marine algae for treating cancer, infectious disease, and inflammation

A significant rise in the occurrence and severity of adverse reactions to several synthetic drugs has fueled considerable interest in natural product-based therapeutics. In humans and animals, polysaccharides from marine microalgae and seaweeds have immunomodulatory effects. In addition, these polysaccharides may possess antiviral, anticancer, hypoglycemic, anticoagulant, and antioxidant properties. During inflammatory diseases, such as autoimmune diseases and sepsis, immunosuppressive molecules can serve as therapeutic agents. Similarly, molecules that participate in immune activation can induce immune responses against cancer and infectious diseases. We aim to discuss the chemical composition of the algal polysaccharides, namely alginate, fucoidan, ascophyllan, and porphyran. We also summarize their applications in the treatment of cancer, infectious disease, and inflammation. Recent applications of nanoparticles that are based on algal polysaccharides for the treatment of cancer and inflammatory diseases have also been addressed. In conclusion, these applications of marine algal polysaccharides could provide novel therapeutic alternatives for several diseases.

Controlled and Local Delivery of Antibiotics by 3D Core/Shell Printed Hydrogel Scaffolds to Treat Soft Tissue Infections

Soft tissue infections in open fractures or burns are major cause for high morbidity in trauma patients. Sustained, long-term and localized delivery of antimicrobial agents is needed for early eradication of these infections. Traditional (topical or systemic) antibiotic delivery methods are associated with a variety of problems, including their long-term unavailability and possible low local concentration. Novel approaches for antibiotic delivery via wound coverage/healing scaffolds are constantly being developed. Many of these approaches are associated with burst release and thus seldom maintain long-term inhibitory concentrations. Using 3D core/shell extrusion printing, scaffolds consisting of antibiotic depot (in the core composed of low concentrated biomaterial ink 3% alginate) surrounded by a denser biomaterial ink (shell) were fabricated. Denser biomaterial ink (composed of alginate and methylcellulose or alginate, methylcellulose and Laponite) retained scaffold shape and modulated antibiotic release kinetics. Release of antibiotics was observed over seven days, indicating sustained release characteristics and maintenance of potency. Inclusion of Laponite in shell, significantly reduced burst release of antibiotics. Additionally, the effect of shell thickness on release kinetics was demonstrated. Amalgamation of such a modular delivery system with other biofabrication methods could potentially open new strategies to simultaneously treat soft tissue infections and aid wound regeneration.

Collagen-Based Nanofibers for Skin Regeneration and Wound Dressing Applications

Skin regeneration after an injury is very vital, but this process can be impeded by several factors. Regenerative medicine is a developing biomedical field with the potential to decrease the need for an organ transplant. Wound management is challenging, particularly for chronic injuries, despite the availability of various types of wound dressing scaffolds in the market. Some of the wound dressings that are in clinical practice have various drawbacks such as poor antibacterial and antioxidant efficacy, poor mechanical properties, inability to absorb excess wound exudates, require frequent change of dressing and fails to offer a suitable moist environment to accelerate the wound healing process. Collagen is a biopolymer and a major constituent of the extracellular matrix (ECM), making it an interesting polymer for the development of wound dressings. Collagen-based nanofibers have demonstrated interesting properties that are advantageous both in the arena of skin regeneration and wound dressings, such as low antigenicity, good biocompatibility, hemostatic properties, capability to promote cellular proliferation and adhesion, and non-toxicity. Hence, this review will discuss the outcomes of collagen-based nanofibers reported from the series of preclinical trials of skin regeneration and wound healing.

Alginate Modification and Lectin-Conjugation Approach to Synthesize the Mucoadhesive Matrix

Alginates are natural anionic polyelectrolytes investigated in various biomedical applications, such as drug delivery, tissue engineering, and 3D bioprinting. Functionalization of alginates is one possible way to provide a broad range of requirements for those applications. A range of techniques, including esterification, amidation, acetylation, phosphorylation, sulfation, graft copolymerization, and oxidation and reduction, have been implemented for this purpose. The rationale behind these investigations is often the combination of such modified alginates with different molecules. Particularly promising are lectin conjugate macromolecules for lectin-mediated drug delivery, which enhance the bioavailability of active ingredients on a specific site. Most interesting for such application are alginate derivatives, because these macromolecules are more resistant to acidic and enzymatic degradation. This review will report recent progress in alginate modification and conjugation, focusing on alginate-lectin conjugation, which is proposed as a matrix for mucoadhesive drug delivery and provides a new perspective for future studies with these conjugation methods.

Hydrogel-Based Biomaterials Engineered from Natural-Derived Polysaccharides and Proteins for Hemostasis and Wound Healing

Rapid and effective hemostasis is of great importance to improve the quality of treatment and save lives in emergency, surgical practice, civilian, and military settings. Traditional hemostatic materials such as tourniquets, gauze, bandages, and sponges have shown limited efficacy in the management of uncontrollable bleeding, resulting in widespread interest in the development of novel hemostatic materials and techniques. Benefiting from biocompatibility, degradability, injectability, tunable mechanical properties, and potential abilities to promote coagulation, wound healing, and anti-infection, hydrogel-based biomaterials, especially those on the basis of natural polysaccharides and proteins, have been increasingly explored in preclinical studies over the past few years. Despite the exciting research progress and initial commercial development of several hemostatic hydrogels, there is still a significant distance from the desired hemostatic effect applicable to clinical treatment. In this review, after elucidating the process of biological hemostasis, the latest progress of hydrogel biomaterials engineered from natural polysaccharides and proteins for hemostasis is discussed on the basis of comprehensive literature review. We have focused on the preparation strategies, physicochemical properties, hemostatic and wound-healing abilities of these novel biomaterials, and highlighted the challenges that needed to be addressed to achieve the transformation of laboratory research into clinical practice, and finally presented future research directions in this area.

Enhancing wound healing dressing development through interdisciplinary collaboration

The process of wound healing includes four phases: Hemostasis, inflammation, proliferation, and remodeling. Many wound dressings and technologies have been developed to enhance the body's ability to close wounds and restore the function of damaged tissues. Several advancements in wound healing technology have resulted from innovative experiments by individual scientists or physicians working independently. The interplay between the medical and scientific research fields is vital to translating new discoveries in the lab to treatments at the bedside. Tracing the history of wound dressing development reveals that there is an opportunity for deeper collaboration between multiple disciplines to accelerate the advancement of novel wound healing technologies. In this review, we explore the different types of wound dressings and biomaterials used to treat wounds, and we investigate the role of multidisciplinary collaboration in the development of various wound management technologies to illustrate the benefit of direct collaboration between physicians and scientists.

An Overview of Cellulose Derivatives-Based Dressings for Wound-Healing Management

Presently, notwithstanding the progress regarding wound-healing management, the treatment of the majority of skin lesions still represents a serious challenge for biomedical and pharmaceutical industries. Thus, the attention of the researchers has turned to the development of novel materials based on cellulose derivatives. Cellulose derivatives are semi-synthetic biopolymers, which exhibit high solubility in water and represent an advantageous alternative to water-insoluble cellulose. These biopolymers possess excellent properties, such as biocompatibility, biodegradability, sustainability, non-toxicity, non-immunogenicity, thermo-gelling behavior, mechanical strength, abundance, low costs, antibacterial effect, and high hydrophilicity. They have an efficient ability to absorb and retain a large quantity of wound exudates in the interstitial sites of their networks and can maintain optimal local moisture. Cellulose derivatives also represent a proper scaffold to incorporate various bioactive agents with beneficial therapeutic effects on skin tissue restoration. Due to these suitable and versatile characteristics, cellulose derivatives are attractive and captivating materials for wound-healing applications. This review presents an extensive overview of recent research regarding promising cellulose derivatives-based materials for the development of multiple biomedical and pharmaceutical applications, such as wound dressings, drug delivery devices, and tissue engineering.

Continuous and controllable electro-fabrication of antimicrobial copper-alginate dressing for infected wounds treatment

The contamination of chronic wound with bacteria especially methicillin-resistant Staphylococcus aureus (MRSA) is considered as the major factor interferencing normal wound healing. There still remain great challenges in developing safe and effective wound dressings with wide-spectrum antibacterial functions. Alginate hydrogel is a common dressing for wound treatment. Copper is one of the trace elements in human body with inherent antibacterial activity. Traditional methods for preparing a structure-controlled copper-alginate antibacterial matrix are difficult however, due to the fast and uncontrolled gelation between alginate and metal ions. In this work, we report an electrodeposition method for rapid fabrication of copper cross-linked alginate antibacterial films (Cu²⁺-Alg) with controlled structure and copper content, which is relied on an electrical signal controlled release of copper ions from the reaction of insoluble salt Cu₂(OH)₂CO₃ and the generated protons via water electrolysis on anode. The results prove that the physical structure and chemical composition of the electrodeposited Cu²⁺-Alg films can be continuously modulated by the imposed charges during electrodeposition. In vitro tests demonstrate the film has Cu²⁺ content-dependent bactericidal activities. Film's cytocompatibility is well controlled by the imposed charges for Cu²⁺-Alg fabrication. The MRSA infected wound model in vivo also indicates that Cu²⁺-Alg film can effectively eliminate bacterial infection and suppress host inflammatory responses. We believe this study demonstrates a convenient and controllable strategy to fabricate alginate antibacterial dressings with potential applications for infected wound treatment. More broadly, our work reveals electrodeposition is a general and simple platform to design alginate films with versatile functions.

Ex situ and in situ Magnetic Phase Synthesised Magneto-Driven Alginate Beads

Biocompatible magnetic hydrogels provide a great source of synthetic materials, which facilitate remote stimuli, enabling safer biological and environmental applications. Prominently, the ex situ and in situ magnetic phase integration is used to fabricate magneto-driven hydrogels, exhibiting varied behaviours in aqueous media. Therefore, it is essential to understand their physicochemical properties to target the best material for each application. In this investigation, three different types of magnetic alginate beads were synthesised. First, by direct, ex situ, calcium chloride gelation of a mixture of Fe₃O₄ nanoparticles with an alginate solution. Second, by in situ synthesis of Fe₃O₄ nanoparticles inside of the alginate beads and third, by adding an extra protection alginate layer on the in situ synthesised Fe₃O₄ nanoparticles alginate beads. The three types of magnetic beads were chemically and magnetically characterised. It was found that they exhibited particular stability to different pH and ionic strength conditions in aqueous solution. These are essential properties to be controlled when used for magneto-driven applications such as targeted drug delivery and water purification. Therefore, this fundamental study will direct the path to the selection of the best magnetic bead synthesis protocol according to the defined magneto-driven application.

Undressing the choice of dressings

There is a vast number of wound dressings to choose from, which can make selecting the most suitable dressing for a wound a daunting prospect. This article highlights how the wound can guide the doctor's decision. Although all wound dressings are intended to achieve optimal wound healing and protection from contamination, they do so to varying degrees depending on the qualities of the dressing and the wound itself. This article looks at a range of dressings, from traditional to newer dressings, and evaluates their benefits and contraindications to help determine where they are best suited for use in wound management.

Recent Progress in Intelligent Wearable Sensors for Health Monitoring and Wound Healing Based on Biofluids

The intelligent wearable sensors promote the transformation of the health care from a traditional hospital-centered model to a personal portable device-centered model. There is an urgent need of real-time, multi-functional, and personalized monitoring of various biochemical target substances and signals based on the intelligent wearable sensors for health monitoring, especially wound healing. Under this background, this review article first reviews the outstanding progress in the development of intelligent, wearable sensors designed for continuous, real-time analysis, and monitoring of sweat, blood, interstitial fluid, tears, wound fluid, etc. Second, this paper reports the advanced status of intelligent wound monitoring sensors designed for wound diagnosis and treatment. The paper highlights some smart sensors to monitor target analytes in various wounds. Finally, this paper makes conservative recommendations regarding future development of intelligent wearable sensors.

Biocompatible therapeutic albumin/genipin bioglue for postoperative wound adhesion and residual tumor ablation

Surgical adhesives have partly replaced traditional sutures to seal and reattach tissues due to their superiorities in preventing liquids leakage and avoiding secondary damage in the surrounding wound area. Most of the existing adhesives are committed to promoting wound healing and functional recovery. A therapeutic adhesive that assists in clearing the residual tumors in the surgical area is undoubtedly meaningful to obtain a better clinical outcome. Herein, enlightened by commercial BioGlue (albumin/glutaraldehyde sealant), a biocompatible therapeutic albumin/genipin bioglue is designed for postoperative wound adhesion and tumor ablation. The albumin/genipin bioglue is formed by simple mixing of bovine serum albumin (BSA) and genipin (GP) under a 35 °C water bath for 24 h without further purification. The obtained dark-blue fluorescent adhesive exhibits a significant temperature increase accompanied by heating-induced curing once irradiated with an 808-nm laser. This unique characteristic allows BSA-GP a therapeutic adhesive for postoperative wound adhesion and photothermal elimination of residual tumors under laser irradiation. Moreover, its easy injectability and impressive photothermal efficacy also make it feasible for in situ tumor photothermal ablation. The ultrasimple synthetic strategy by mimicking BioGlue endows BSA-GP adhesive with large-scale production capacity and clinical transformation potential, which is a successful paradigm for reforming existing clinical products.

Antibacterial and Hemocompatible pH-Responsive Hydrogel for Skin Wound Healing Application: In Vitro Drug Release

The treatment of successive skin wounds necessitates meticulous medical procedures. In the care and treatment of skin wounds, hydrogels produced from natural polymers with controlled drug release play a crucial role. Arabinoxylan is a well-known and widely available biological macromolecule. We produced various formulations of blended composite hydrogels (BCHs) from arabinoxylan (ARX), carrageenan (CG), and reduced graphene oxide (rGO) using and cross-linked them with an optimal amount of tetraethyl orthosilicate (TEOS). The structural, morphological, and mechanical behavior of the BCHs samples were determined using Fourier-transform infrared spectroscopy (FT-IR), Scanning electron microscope (SEM), mechanical testing, and wetting, respectively. The swelling and degradation assays were performed in phosphate-buffered saline (PBS) solution and aqueous media. Maximum swelling was observed at pH 7 and the least swelling in basic pH regions. All composite hydrogels were found to be hemocompatible. In vitro, silver sulfadiazine release profile in PBS solution was analyzed via the Franz diffusion method, and maximum drug release (87.9%) was observed in 48 h. The drug release kinetics was studied against different mathematical models (zero-order, first-order, Higuchi, Hixson-Crowell, Korsmeyer-Peppas, and Baker-Lonsdale models) and compared their regression coefficient (R2) values. It was observed that drug release follows the Baker-Lonsdale model, as it has the highest value (0.989) of R2. Hence, the obtained results indicated that, due to optimized swelling, wetting, and degradation, the blended composite hydrogel BCH-3 could be an essential wound dressing biomaterial for sustained drug release for skin wound care and treatment.

The Antibiofilm Nanosystems for Improved Infection Inhibition of Microbes in Skin

Biofilm formation is an important virulence factor for the opportunistic microorganisms that elicit skin infections. The recalcitrant feature of biofilms and their antibiotic tolerance impose a great challenge on the use of conventional therapies. Most antibacterial agents have difficulty penetrating the matrix produced by a biofilm. One novel approach to address these concerns is to prevent or inhibit the formation of biofilms using nanoparticles. The advantages of using nanosystems for antibiofilm applications include high drug loading efficiency, sustained or prolonged drug release, increased drug stability, improved bioavailability, close contact with bacteria, and enhanced accumulation or targeting to biomasses. Topically applied nanoparticles can act as a strategy for enhancing antibiotic delivery into the skin. Various types of nanoparticles, including metal oxide nanoparticles, polymeric nanoparticles, liposomes, and lipid-based nanoparticles, have been employed for topical delivery to treat biofilm infections on the skin. Moreover, nanoparticles can be designed to combine with external stimuli to produce magnetic, photothermal, or photodynamic effects to ablate the biofilm matrix. This study focuses on advanced antibiofilm approaches based on nanomedicine for treating skin infections. We provide in-depth descriptions on how the nanoparticles could effectively eliminate biofilms and any pathogens inside them. We then describe cases of using nanoparticles for antibiofilm treatment of the skin. Most of the studies included in this review were supported by in vivo animal infection models. This article offers an overview of the benefits of nanosystems for treating biofilms grown on the skin.

Marine Polysaccharides for Wound Dressings Application: An Overview

Wound dressings have become a crucial treatment for wound healing due to their convenience, low cost, and prolonged wound management. As cutting-edge biomaterials, marine polysaccharides are divided from most marine organisms. It possesses various bioactivities, which allowing them to be processed into various forms of wound dressings. Therefore, a comprehensive understanding of the application of marine polysaccharides in wound dressings is particularly important for the studies of wound therapy. In this review, we first introduce the wound healing process and describe the characteristics of modern commonly used dressings. Then, the properties of various marine polysaccharides and their application in wound dressing development are outlined. Finally, strategies for developing and enhancing marine polysaccharide wound dressings are described, and an outlook of these dressings is given. The diverse bioactivities of marine polysaccharides including antibacterial, anti-inflammatory, haemostatic properties, etc., providing excellent wound management and accelerate wound healing. Meanwhile, these biomaterials have higher biocompatibility and biodegradability compared to synthetic ones. On the other hand, marine polysaccharides can be combined with copolymers and active substances to prepare various forms of dressings. Among them, emerging types of dressings such as nanofibers, smart hydrogels and injectable hydrogels are at the research frontier of their development. Therefore, marine polysaccharides are essential materials in wound dressings fabrication and have a promising future.

Alginate Bead Biosystem for the Determination of Lactate in Sweat Using Image Analysis

Lactate is present in sweat at high concentrations, being a metabolite of high interest in sport science and medicine. Therefore, the potential to determine lactate concentrations in physiological fluids, at the point of need with minimal invasiveness, is very valuable. In this work, the synthesis and performance of an alginate bead biosystem was investigated. Artificial sweat with different lactate concentrations was used as a proof of concept. The lactate detection was based on a colorimetric assay and an image analysis method using lactate oxidase, horseradish peroxidase and tetramethyl benzidine as the reaction mix. Lactate in artificial sweat was detected with a R² = 0.9907 in a linear range from 10 mM to 100 mM, with a limit of detection of 6.4 mM and a limit of quantification of 21.2 mM. Real sweat samples were used as a proof of concept to test the performance of the biosystem, obtaining a lactate concentration of 48 ± 3 mM. This novel sensing configuration, using alginate beads, gives a fast and reliable method for lactate sensing, which could be integrated into more complex analytical systems.

Evaluation of debridement effects of bromelain-loaded sodium alginate nanoparticles incorporated into chitosan hydrogel in animal models

OBJECTIVES

Bromelain, a mixture of proteolytic enzymes from pineapple (Ananas comosus) is known as a potential debriding agent in burn treatment. In this research, the debridement efficiency of chitosan hydrogel loaded by sodium alginate-chitosan nanoparticles (NPs) containing bromelain (Br 10%-AG-CS NPs) was evaluated in animal models.

MATERIALS AND METHODS

The NPs were prepared using the ionic gelation technique and their properties were identified. Then, the debridement effect of bromelain NPs incorporated into chitosan hydrogel was evaluated 4 hr after wound treatment in animal models.

RESULTS

The particle size of positively charged Br-AG-Cs NPs was about 390±25 nm. The encapsulation efficiency of bromelain into AG-CS NPs was about 92%. The in vitro release profile showed that the maximum release of bromelain from NPs occurred during the first 4 hr (70%). The hydrogel structure did not significantly affect the profile release of bromelain in the formulation. After 6 months of storage at 4 and 25 °C, the synthesized NPs indicated no significant changes in bromelain activity. It was found that Br 10%-Ag-Cs NPs-CS hydrogel had the most beneficial effects on reducing necrotic tissues and resulted in re-epithelialization compared with other treated groups (negative and positive control, CS hydrogel, and Br 10%-CS hydrogel).

CONCLUSION

Therefore, using this novel formulation can be considered a potential debridement agent.

Synthetic hydrogels as blood clot mimicking wound healing materials

Excessive bleeding-or hemorrhage-causes millions of civilian and non-civilian casualties every year. Additionally, wound sequelae, such as infections, are a significant source of chronic morbidity, even if the initial bleeding is successfully stopped. To treat acute and chronic wounds, numerous wound healing materials have been identified, tested, and adopted. Among them are topical dressings, such as gauzes, as well as natural and biomimetic materials. However, none of these materials successfully mimic the complex and dynamic properties of the body's own wound healing material: the blood clot. Specifically, blood clots exhibit complex mechanical and biochemical properties that vary across spatial and temporal scales to guide the wound healing response, which make them the ideal wound healing material. In this manuscript, we review blood clots' complex mechanical and biochemical properties, review current wound healing materials, and identify opportunities where new materials can provide additional functionality, with a specific focus on hydrogels. We highlight recent developments in synthetic hydrogels that make them capable of mimicking a larger subset of blood clot features: as plugs and as stimuli for tissue repair. We conclude that future hydrogel materials designed to mimic blood clot biochemistry, mechanics, and architecture can be combined with exciting platelet-like particles to serve as hemostats that also promote the biological wound healing response. Thus, we believe synthetic hydrogels are ideal candidates to address the clear need for better wound healing materials.

Long-term stability, high strength, and 3D printable alginate hydrogel for cartilage tissue engineering application

Cartilage damage is one of the main causes of disability, and 3D bioprinting technology can produce complex structures that are particularly suitable for constructing a customized and irregular tissue engineering scaffold for cartilage repair. Alginate is an attractive biomaterial for bioinks because of its good biological safety profile and fast ionic gelation. However, ionically crosslinked alginate hydrogels are recognized as lacking enough mechanical property and long-term stability due to ion exchange. Here, we developed a double crosslinked alginate (DC-Alg) hydrogel for 3D bioprinting, and human umbilical cord mesenchymal stem cells (huMSCs) could differentiate into chondrocytes on its printed 3D scaffold after 4 weeks' culture. We performed sequential modification of alginate with L-cysteine and 5-norbornene-2-methylamine, and the DC-Alg hydrogels were obtained in the presence of CaCl₂and ultraviolet light with stronger mechanical properties than those of the single ionic crosslinked alginate hydrogels, which was similar to natural cartilage. They also had better stability and could be maintained in DMEM medium for over 1 month, as well good viability for huMSCs. Moreover, the DC-Alg as 3D printing inks demonstrated a better printing accuracy (∼200 µm). After 4 weeks culture of huMSCs in the 3D printed DC-Alg scaffolds, the expressions of chondrogenic genes such asaggrecan (agg), collagen II (col II), and SRY-box transcription factor9(sox-9) were obviously observed, indicating the differentiation of huMSCs into cartilage. Immumohistochemical staining analysis further exhibited cartilage tissue developed well in the 3D printed scaffolds. Our study is the first demonstration of DC-Alg in 3D printing for MSC differentiation into cartilage, which shows a potential application in cartilage defect repair.

Polymer-Based Nanotherapeutics for Burn Wounds

Burn wounds are complex and intricate injuries that have become a common cause of trauma leading to significant mortality and morbidity every year. Dressings are applied to burn wounds with the aim of promoting wound healing, preventing burn infection and restoring skin function. The dressing protects the injury and contributes to recovery of dermal and epidermal tissues. Polymer-based nanotherapeutics are increasingly being exploited as burn wound dressings. Natural polymers such as cellulose, chitin, alginate, collagen, gelatin and synthetic polymers like poly (lactic-co-glycolic acid), polycaprolactone, polyethylene glycol, and polyvinyl alcohol are being obtained as nanofibers by nanotechnological approaches like electrospinning and have shown wound healing and re-epithelialization properties. Their biocompatibility, biodegradability, sound mechanical properties and unique structures provide optimal microenvironment for cell proliferation, differentiation, and migration contributing to burn wound healing. The polymeric nanofibers mimic collagen fibers present in extracellular matrix and their high porosity and surface area to volume ratio enable increased interaction and sustained release of therapeutics at the site of thermal injury. This review is an attempt to compile all recent advances in the use of polymer-based nanotherapeutics for burn wounds. The various natural and synthetic polymers used have been discussed comprehensively and approaches being employed have been reported. With immense research effort that is currently being invested in this field and development of proper characterization and regulatory framework, future progress in burn treatment is expected to occur. Moreover, appropriate preclinical and clinical research will provide evidence for the great potential that polymer-based nanotherapeutics hold in the management of burn wounds.

Current Trends in Advanced Alginate-Based Wound Dressings for Chronic Wounds

Chronic wounds represent a major public health issue, with an extremely high cost worldwide. In healthy individuals, the wound healing process takes place in different stages: inflammation, cell proliferation (fibroblasts and keratinocytes of the dermis), and finally remodeling of the extracellular matrix (equilibrium between metalloproteinases and their inhibitors). In chronic wounds, the chronic inflammation favors exudate persistence and bacterial film has a special importance in the dynamics of chronic inflammation in wounds that do not heal. Recent advances in biopolymer-based materials for wound healing highlight the performance of specific alginate forms. An ideal wound dressing should be adherent to the wound surface and not to the wound bed, it should also be non-antigenic, biocompatible, semi-permeable, biodegradable, elastic but resistant, and cost-effective. It has to give protection against bacterial, infectious, mechanical, and thermal agents, to modulate the level of wound moisture, and to entrap and deliver drugs or other molecules This paper explores the roles of alginates in advanced wound-dressing forms with a particular emphasis on hydrogels, nanofibers networks, 3D-scaffolds or sponges entrapping fibroblasts, keratinocytes, or drugs to be released on the wound-bed. The latest research reports are presented and supported with in vitro and in vivo studies from the current literature.

Gelatin-Based Hybrid Scaffolds: Promising Wound Dressings

Wound care is a major biomedical field that is challenging due to the delayed wound healing process. Some factors are responsible for delayed wound healing such as malnutrition, poor oxygen flow, smoking, diseases (such as diabetes and cancer), microbial infections, etc. The currently used wound dressings suffer from various limitations, including poor antimicrobial activity, etc. Wound dressings that are formulated from biopolymers (e.g., cellulose, chitin, gelatin, chitosan, etc.) demonstrate interesting properties, such as good biocompatibility, non-toxicity, biodegradability, and attractive antimicrobial activity. Although biopolymer-based wound dressings display the aforementioned excellent features, they possess poor mechanical properties. Gelatin, a biopolymer has excellent biocompatibility, hemostatic property, reduced cytotoxicity, low antigenicity, and promotes cellular attachment and growth. However, it suffers from poor mechanical properties and antimicrobial activity. It is crosslinked with other polymers to enhance its mechanical properties. Furthermore, the incorporation of antimicrobial agents into gelatin-based wound dressings enhance their antimicrobial activity in vitro and in vivo. This review is focused on the development of hybrid wound dressings from a combination of gelatin and other polymers with good biological, mechanical, and physicochemical features which are appropriate for ideal wound dressings. Gelatin-based wound dressings are promising scaffolds for the treatment of infected, exuding, and bleeding wounds. This review article reports gelatin-based wound dressings which were developed between 2016 and 2021.

Preparation of a Hydrogel Nanofiber Wound Dressing

The study addressed the production of a hydrogel nanofiber skin cover and included the fabrication of hydrogel nanofibers from a blend of polyvinyl alcohol and alginate. The resulting fibrous layer was then crosslinked with glutaraldehyde, and, after 4 h of crosslinking, although the gelling component, i.e., the alginate, crosslinked, the polyvinyl alcohol failed to do so. The experiment included the comparison of the strength and ductility of the layers before and after crosslinking. It was determined that the fibrous layer following crosslinking evinced enhanced mechanical properties, which acted to facilitate the handling of the material during its application. The subsequent testing procedure proved that the fibrous layer was not cytotoxic. The study further led to the production of a modified hydrogel nanofiber layer that combined polyvinyl alcohol with alginate and albumin. The investigation of the fibrous layers produced determined that following contact with water the polyvinyl alcohol dissolved leading to the release of the albumin accompanied by the swelling of the alginate and the formation of a hydrogel.

Development of Spanish Broom and Flax Dressings with Glycyrrhetinic Acid-Loaded Films for Wound Healing: Characterization and Evaluation of Biological Properties

The selection of an appropriate dressing for each type of wound is a very important procedure for a faster and more accurate healing process. So, the aim of this study was to develop innovative Spanish Broom and flax wound dressings, as alternatives to cotton used as control, with polymeric films containing glycyrrhetinic acid (GA) to promote wound-exudate absorption and the healing process. The different wound dressings were prepared by a solvent casting method, and characterized in terms of drug loading, water uptake, and in vitro release. Moreover, biological studies were performed to evaluate their biocompatibility and wound-healing efficacy. Comparing the developed wound dressings, Spanish Broom dressings with GA-loaded sodium hyaluronate film had the best functional properties, in terms of hydration ability and GA release. Moreover, they showed a good biocompatibility, determining a moderate induction of cell proliferation and no cytotoxicity. In addition, the wound-healing test revealed that the Spanish Broom dressings promoted cell migration, further facilitating the closure of the wound.

Novel fabrication of dual nanoparticle loaded-co-polymeric dressing for effective healing efficiency in wound care after fracture surgery

In the present study, curcumin loaded chitosan/poly ethylene glycol nanomaterial (CUR loaded CH/PEG/AgNPs) was fabricated and characterized for wound healing efficiency after fracture surgery. The interaction of functional groups and crystal nature were recorded under FTIR and XRD spectrometer and reveals that the stabilization and purity of NPs was mediated by OH/NH₂ groups in chitosan. FESEM showed the presence of spherical and well dispersed particles. The average size of the particle was 13.48 nm. The CUR loaded CH/PEG/AgNPs showed higher swelling capacity (495.6 g/g) in phosphate buffer saline compared to water (140.2 g/g). The drug loading efficiency was higher in CUR loaded CH/PEG/AgNPs compared to CH/PEG films as recorded by the absorbance peak at 460 nm corresponds to curcumin in the composite. A dose dependent cytotoxicity of CUR loaded CH/PEG/AgNPs was noticed on Vero cells. The viability of Vero cells was increased to 96.5% at 100 μg/mL. A remarkable change in Vero cells such as condensed nuclei and membrane blabbing was noticed in cells treated with CUR loaded CH/PEG/AgNPs. A greater inhibition of Staphylococcus aureus and Escherichia coli was noticed at 24 h and 48 h treated with CUR loaded CH/PEG/AgNPs. A greater healing effect by increasing the wound contraction (98% on day 12) was observed with CUR loaded CH/PEG/AgNPs compared to control. Histopathological examination demonstrated that CUR loaded CH/PEG/AgNPs showed complete tissue regeneration in wound excised rats. The results of this study conclude that CUR loaded CH/PEG/AgNPs could be promising candidate to prevent microbial infections in wound, healing wound rapidly and inhibit the proliferation of apoptotic cells. Thus, CUR loaded CH/PEG/AgNPs could be a potential therapeutic agent with broad spectrum applications in the future. HighlightsA new approach was used to develop curcumin-loaded chitosan/poly(ethylene glycol)/AgNPs.The CUR-loaded CH/PEG/AgNPs were confirmed to be crystals by XRD analysis.The prepared CH/PEG/AgNPs were spherical and averaged 13.48 nm in size.The growth of S. aureus and E. coli were inhibited mostly by CH/PEG/AgNPs treatment.CUR loaded CH/PEG/AgNPs showed complete tissue regeneration in wound excised mice.

Nanocarrier-Mediated Topical Insulin Delivery for Wound Healing

Wound care has been clinically demanding due to inefficacious treatment that represents an economic burden for healthcare systems. In Europe, approximately 7 million people are diagnosed with untreated wounds, leading to a cost between 6.000€ and 10.000€ per patient/year. In the United States of America, 1.5 million people over 65 years old suffer from chronic wounds. A promising therapeutic strategy is the use of exogenous growth factors because they are decreased at the wound site, limiting the recovery of the skin. Insulin is one of the cheapest growth factors in the market able to accelerate the re-epithelialization and stimulate angiogenesis and cell migration. However, the effectiveness of topical insulin in wound healing is hampered by the proteases in the wound bed. The encapsulation into nanoparticles improves its stability in the wound, providing adhesion to the mucosal surface and allowing its sustained release. The aim of this review is to perform a standing point about a promising strategy to treat different types of wounds by the topical delivery of insulin-loaded nanocarriers.

A Comprehensive Review on the Applications of Exosomes and Liposomes in Regenerative Medicine and Tissue Engineering

Tissue engineering and regenerative medicine are generally concerned with reconstructing cells, tissues, or organs to restore typical biological characteristics. Liposomes are round vesicles with a hydrophilic center and bilayers of amphiphiles which are the most influential family of nanomedicine. Liposomes have extensive research, engineering, and medicine uses, particularly in a drug delivery system, genes, and vaccines for treatments. Exosomes are extracellular vesicles (EVs) that carry various biomolecular cargos such as miRNA, mRNA, DNA, and proteins. As exosomal cargo changes with adjustments in parent cells and position, research of exosomal cargo constituents provides a rare chance for sicknesses prognosis and care. Exosomes have a more substantial degree of bioactivity and immunogenicity than liposomes as they are distinctly chiefly formed by cells, which improves their steadiness in the bloodstream, and enhances their absorption potential and medicinal effectiveness in vitro and in vivo. In this review, the crucial challenges of exosome and liposome science and their functions in disease improvement and therapeutic applications in tissue engineering and regenerative medicine strategies are prominently highlighted.

Effizienzsteigerung und Kostenreduktion durch Straffung der Wundversorgung von chronischen Wunden in einem Klinikverbund mit 16 Kliniken

Seit Jahren gilt die feuchte Wundbehandlung als Standard in der Wundversorgung. Obwohl dieser Grundsatz allgemein akzeptiert ist, ist die Evidenz schon für dieses Dogma überschaubar. Die Industrie bietet auf diesem Grundsatz eine Vielzahl von Produkten zur Wundversorgung an, deren Überlegenheit gegenüber anderen Produkten auf evidenzbasierter Grundlage oft nicht gegeben ist.

Ziel war es, in einer Klinikgruppe das Sortiment unter hauptsächlich einkaufspolitischen Kriterien zu straffen und zu häufige, unbegründete Therapiewechsel zu vermeiden. Daraus ergab sich die Aufgabe, sich nach Möglichkeit auf wenige Hersteller zu begrenzen.

Um die Akzeptanz und die Gründe für alle Anwender im Prozess transparent zu gestalten, wurden diese über eine strukturierte Abfrage für das Thema sensibilisiert und mitgenommen. Als Ergebnis ist ein kleines, sehr straffes Kontingent in der Wundversorgung mit hoher Anwenderakzeptanz entstanden. Hierdurch lassen sich im Einkauf deutliche Kosteneinsparungen realisieren.

Medicated multi-targeted alginate-based dressings for potential treatment of mixed bacterial-fungal infections in diabetic foot ulcers

Recently developed medicated dressings target either bacterial or fungal infection only, which is not effective for the treatment of mixed infections common in diabetic foot ulcers (DFUs). This study aimed to develop advanced bioactive alginate-based dressings (films and wafers) to deliver therapeutically relevant doses of ciprofloxacin (CIP) and fluconazole (FLU) to target mixed bacterial and fungal infections in DFUs. The alginate compatibility with the drugs was confirmed by SEM, XRD, FTIR and texture analysis, while the medicated wafers showed better fluid handling properties than the films in the presence of simulated wound fluid. The dressings showed initial fast release of FLU followed by sustained release of CIP which completely eradicated E. coli, S. aureus, P. aeruginosa and reduced fungal load (C. albicans) by 10-fold within 24 h. Moreover, the medicated dressings were biocompatible (>70% cell viability over 72 h) with human primary adult keratinocytes and in-vitro scratch assay showed 65-68% wound closure within 7 days.

Chitosan/Hyaluronic acid/Alginate and an assorted polymers loaded with honey, plant, and marine compounds for progressive wound healing-Know-how

Biomaterials are being extensively used in regenerative medicine including tissue engineering applications, as these enhance tissue development, repair, and help in the process of angiogenesis. Wound healing is a crucial biological process of regeneration of ruptured tissue after getting injury to the skin and other soft tissue in humans and animals. Besides, the accumulation of microbial biofilms around the wound surface can increase the risk and physically obstruct the wound healing activity, and may even lead to amputation. Hence, in both acute and chronic wounds, prominent biomaterials are required for wound healing along with antimicrobial agents. This review comprehensively addresses the antimicrobial and wound healing effects of chitosan, chitin, cellulose acetate, hyaluronic acid, pullulan, bacterial cellulose, fibrin, alginate, etc. based wound dressing biomaterials fabricated with natural resources such as honey, plant bioactive compounds, and marine-based polymers. Due to their excellent biocompatibility and biodegradability, bioactive compounds derived from honey, plants, and marine resources are commonly used in biomedical and tissue engineering applications. Different types of polymer-based biomaterials including hydrogel, film, scaffold, nanofiber, and sponge dressings fabricated with bioactive agents including honey, curcumin, tannin, quercetin, andrographolide, gelatin, carrageenan, etc., can exhibit significant wound healing process in, diabetic wounds, diabetic ulcers, and burns, and help in cartilage repair along with good biocompatibility and antimicrobial effects. Among the reviewed biomaterials, carbohydrate polymers such as chitosan-based biomaterials are prominent and widely used for wound healing applications followed by hyaluronic acid and alginate-based biomaterials loaded with honey, plant, and marine compounds. This review first provides an overview of the vast natural resources used to formulate different biomaterials for the treatment of antimicrobial, acute, and chronic wound healing processes.

WITHDRAWN: Epicatechin gallate-loaded calcium alginate sponges promote diabetic wound healing through protecting against oxidative stress and modulation of immune response via PI3K/AKT/NFκB signaling pathway

This article has been withdrawn at the request of the author(s) and/or editor. The Publisher apologizes for any inconvenience this may cause.

Wound dressings: curbing inflammation in chronic wound healing

Chronic wounds represent an economic burden to healthcare systems worldwide and a societal burden to patients, deeply impacting their quality of life. The incidence of recalcitrant wounds has been steadily increasing since the population more susceptible, the elderly and diabetic, are rapidly growing. Chronic wounds are characterised by a delayed wound healing process that takes longer to heal under standard of care than acute (i.e. healthy) wounds. Two of the most common problems associated with chronic wounds are inflammation and infection, with the latter usually exacerbating the former. With this in mind, researchers and wound care companies have developed and marketed a wide variety of wound dressings presenting different compositions but all aimed at promoting healing. This makes it harder for physicians to choose the correct therapy, especially given a lack of public quantitative data to support the manufacturers’ claims. This review aims at giving a brief introduction to the clinical need for chronic wound dressings, focusing on inflammation and evaluating how bio-derived and synthetic dressings may control excess inflammation and promote healing.

Fabrication of Hybrid Nanofibers from Biopolymers and Poly (Vinyl Alcohol)/Poly (ε-Caprolactone) for Wound Dressing Applications

The management of chronic wounds is challenging. The factors that impede wound healing include malnutrition, diseases (such as diabetes, cancer), and bacterial infection. Most of the presently utilized wound dressing materials suffer from severe limitations, including poor antibacterial and mechanical properties. Wound dressings formulated from the combination of biopolymers and synthetic polymers (i.e., poly (vinyl alcohol) or poly (ε-caprolactone) display interesting properties, including good biocompatibility, improved biodegradation, good mechanical properties and antimicrobial effects, promote tissue regeneration, etc. Formulation of these wound dressings via electrospinning technique is cost-effective, useful for uniform and continuous nanofibers with controllable pore structure, high porosity, excellent swelling capacity, good gaseous exchange, excellent cellular adhesion, and show a good capability to provide moisture and warmth environment for the accelerated wound healing process. Based on the above-mentioned outstanding properties of nanofibers and the unique properties of hybrid wound dressings prepared from poly (vinyl alcohol) and poly (ε-caprolactone), this review reports the in vitro and in vivo outcomes of the reported hybrid nanofibers.

Electrospun Nanofibers/Nanofibrous Scaffolds Loaded with Silver Nanoparticles as Effective Antibacterial Wound Dressing Materials

The treatment of wounds is expensive and challenging. Most of the available wound dressings are not effective and suffer from limitations such as poor antimicrobial activity, toxicity, inability to provide suitable moisture to the wound and poor mechanical performance. The use of inappropriate wound dressings can result in a delayed wound healing process. Nanosize range scaffolds have triggered great attention because of their attractive properties, which include their capability to deliver bioactive agents, high surface area, improved mechanical properties, mimic the extracellular matrix (ECM), and high porosity. Nanofibrous materials can be further encapsulated/loaded with metal-based nanoparticles to enhance their therapeutic outcomes in wound healing applications. The widely studied metal-based nanoparticles, silver nanoparticles exhibit good properties such as outstanding antibacterial activity, display antioxidant, and anti-inflammatory properties, support cell growth, making it an essential bioactive agent in wound dressings. This review article reports the biological (in vivo and in vitro) and mechanical outcomes of nanofibrous scaffolds loaded with silver nanoparticles on wound healing.

Polymer-Based Scaffolds Loaded with Aloe vera Extract for the Treatment of Wounds

The treatment of wounds is one challenging biomedical field due to delayed wound healing common in chronic wounds. Several factors delay wound healing, including microbial infections, malnutrition, underlying physiological conditions, etc. Most of the currently used wound dressing materials suffer from poor antimicrobial properties, poor biodegradability and biocompatibility, and weak mechanical performance. Plant extracts, such as Aloe vera, have attracted significant attention in wound management because of their interesting biological properties. Aloe vera is composed of essential constituents beneficial for the wound healing process, such as amino acids, vitamins C and E, and zinc. Aloe vera influences numerous factors that are involved in wound healing and stimulates accelerated healing. This review reports the therapeutic outcomes of aloe vera extract-loaded polymer-based scaffolds in wound management.

Hyaluronic Acid-Based Scaffolds as Potential Bioactive Wound Dressings

The negative factors that result in delayed and prolonged wound healing process include microbial pathogens, excess wound exudates, underlying conditions, smoking, obesity, etc. Most of the currently used wound dressings demonstrate an inadequate capacity to treat wounds resulting from the factors mentioned above. The commonly used wound dressings include hydrogels, films, hydrocolloids, foams, fibers, sponges, dermal patches, bandages, etc. These wound dressings can be loaded with various types of bioactive agents (e.g., antibiotics, nanoparticles, anti-inflammatory drugs, etc.) to improve their therapeutic outcomes. Biopolymers offer interesting properties suitable for the design of wound dressings. This review article will be based on hyaluronic-acid-based scaffolds loaded with therapeutic agents for the treatment of wounds.

Bioaerogels: Promising Nanostructured Materials in Fluid Management, Healing and Regeneration of Wounds

Wounds affect one's quality of life and should be managed on a patient-specific approach, based on the particular healing phase and wound condition. During wound healing, exudate is produced as a natural response towards healing. However, excessive production can be detrimental, representing a challenge for wound management. The design and development of new healing devices and therapeutics with improved performance is a constant demand from the healthcare services. Aerogels can combine high porosity and low density with the adequate fluid interaction and drug loading capacity, to establish hemostasis and promote the healing and regeneration of exudative and chronic wounds. Bio-based aerogels, i.e., those produced from natural polymers, are particularly attractive since they encompass their intrinsic chemical properties and the physical features of their nanostructure. In this work, the emerging research on aerogels for wound treatment is reviewed for the first time. The current scenario and the opportunities provided by aerogels in the form of films, membranes and particles are identified to face current unmet demands in fluid managing and wound healing and regeneration.

Fabrication and characterization of Chrysin - A plant polyphenol loaded alginate -chitosan composite for wound healing application

The present study explores the therapeutic efficacy of sodium alginate-chitosan scaffolds loaded with Chrysin (ALG-CS-CHY) for dermal wound management. Scaffolds were prepared by the vacuum freeze-drying method. The physiochemical characterization was done through Fourier Transform Infra-Red Spectroscopy (FTIR), which revealed the interactions between the scaffold's functional groups and the drug. Surface Electron microscopy (SEM) showed a porous architecture varying from 200-400 μm. X-ray Diffraction (XRD) showed an ionic interaction between ALG-CS leading to their excellent compatibility. Differential Scanning Calorimetry (DSC) and Thermogravimetric Analysis (TGA) results suggest increased ALG-CS scaffold's thermal stability. In-vitro biodegradation behavior demonstrated controlled degradation with lysozyme. The swelling ratio was highest in the first hour and decreased slowly with time, and the porosity analysis showed a high degree of porosity. The ALG-CS scaffold showed sustained drug availability and minimized re-application, which contributes to effective healing and treatment. The blood compatibility and whole blood clotting ability of the scaffold significantly improved after incorporating the drug. Calcein AM, Propidium iodide, was used for live and dead cell staining, which confirmed that fabricated ALG-CS-CHY scaffolds are biocompatible and facilitate cell growth and cell proliferation. In-vivo and in-vitro observations show that the experimental group treated using the ALG-CS-CHY reduces the period of re-epithelization, accelerated fibroblast cell migration, and contracted wound significantly (p < 0.001) compared to other groups. ALG-CS-CHY scaffolds also increased collagen deposition, hexosamine synthesis, accelerates angiogenesis, and recruiting immune cells at the site of a wound. These results suggest ALG-CS-CHY scaffold serves as an effective dressing for dermal wound management.

Preparation and Antimicrobial Properties of Alginate and Serum Albumin/Glutaraldehyde Hydrogels Impregnated with Silver(I) Ions

Calcium alginate (CaALG) hydrogel beads and two sets of composite beads, formed from a combination of calcium alginate/propylene glycol alginate/human serum albumin (CaALG/PGA/HSA) and from calcium alginate with the quaternary ammonium salt, (3-(trimethoxysilyl)propyl)-octadecyldimethylammonium chloride (QA), (CaALG/QA), were prepared. Bovine serum albumin (BSA) was condensed with glutaraldehyde (GLA) to form a BSA/GLA hydrogel. The corresponding Ag+-containing gels of all of the above hydrogels were also formed, and slow leaching of the biocidal transition metal ion from the gels bestowed broad spectrum antimicrobial activity. In the absence of added Ag+, CaALG/QA was the only material to deliver marginal to moderate antibacterial and antifungal effects. The Ag+ impregnated hydrogel systems have the potential to maintain the antimicrobial properties of silver, minimising the risk of toxicity, and act as reservoirs to afford ongoing sterility.